Pinotex analogue. Pinotex for outdoor woodwork

Internal and exterior finish buildings using wood has become very popular. This material has an attractive appearance, is natural, safe, has excellent thermal insulation characteristics. But so that all external data and its properties are preserved long years you need to take care of it in advance and provide it with the necessary protection.

To do this, you can use paints for wood, which are now available in a large assortment. Many of them are able not only to preserve the former appearance of wooden materials, but also to provide them reliable protection from impact biological pests. These are Pinotex and Aquatex, many are lost when choosing a paint between these two compositions. So which drug is the best?

Pinotex is intended to ensure proper protection of wood from the adverse effects of atmospheric conditions and microorganisms dangerous to it. And also for obtaining a finishing decorative coating on a wooden material. Pinotex paints are produced by an Estonian manufacturer. Paints of this trademark mainly for use on outdoors, but there is also for painting wooden materials indoors.

Pinotex paint has high elasticity, it does not crack from changes in air temperature and movement (breathing) of wooden material. The composition of the paints includes fungicides that prevent the infection of wood with biological agents, as well as protect against the invasion of pests. Pinotex provides moisture resistance to wooden material, moisture can lead to its deterioration and rotting processes. With the help of Pinotex paint, you can improve the appearance of a wooden material without changing or hiding its structure. These compositions are produced in 10 shades, which are allowed to be mixed. Also, if desired, you can tint the paint in 30 colors using special pastes.

Applying Pinotex paint

The composition of Pinotex paints is easy to apply. But you need to work only with cleaned wooden surfaces. They should not have an old paint coating, resins, mold, fungi. It is desirable for efficiency and reliability to pre-prime the wooden material carefully. The composition should be applied with a brush along the wood fibers. Before use, Pinotex paint must be diluted, it is enough to mix it well.

Aquatex paint

Photo: Aquatex extra wood paint is considered to be of better quality than just Aquatex (without the extra prefix). Aquatex paints are made on an alkyd basis. Their manufacturer is Russian company Rogned. These funds gained popularity in the construction market among buyers due to their qualitative composition. They include alkyd resins, antiseptic additives, pigments and organic solvents. The very composition of paints is complex and includes a large number of components. They are suitable for processing wood of any kind indoors and outdoors.

Aquatex paints create a protective film that does not change the texture of the wood material. The antiseptic substances included in their composition prevent the formation of mold, fungi and insects on the surface of the wood. Also, Aquatex products protect wooden material from the adverse effects of sunlight. The coating obtained after painting is vapor-permeable, it does not prevent the wood from breathing. Paints are able to protect wooden material from moisture and fading, prevent cracking and decay. Aquatex paints are available in 15 shades, which can be mixed if necessary.

Applying Aquatex paint

The coloring of wooden material with Aquatex paints is of high quality. Apply this composition to clean and moderately damp wood (moisture percentage should not exceed 40%). All dirt and previous coatings of varnish or paint must be removed. The paint does not spread and can be applied with a roller or brush. The composition of Aquatex does not need to be diluted, it is sold already in a form ready for use. It is recommended to paint wooden material in several layers to get a rich and uniform shade. The resulting coating does not fade and can last in excellent condition for at least 5 years.

Pinotex and Aquatex: which composition is better

It is difficult to say which paint composition among Aquatex or Pinotex is better. The advantage of Aquatex paints is their domestic production, hence their low cost. Pinotex has good quality characteristics. But it is produced by a foreign manufacturer, which affects its price. But Aquatex also has a drawback, it contains organic solvents that spoil the environmental characteristics of the material. Although the manufacturers claim that their paints are not capable of harming human health, they should not be used in residential areas, in rooms such as bedrooms, nurseries, etc.

Our opinion: it is best for you to buy an excellent paint for wood Neomid Biocolor Ultra!!!

For painting a residential wooden building, it is better to purchase Neomid Biocolor Ultra. This glazing agent can be used both for interior painting of sawn and planed wooden surfaces and for exterior. domestic producers Neomid took care of the safety of the composition, it is made on the basis of alkyd varnish. You can use this product from Neomid for decorative and finishing. After applying Biocolor Ultra paint, a translucent, semi-gloss layer is obtained.

The composition of the paint contains a filter of ultraviolet rays in this glazing agent, with the help of which the previous shade of the wood is preserved. Biocolor Ultra is an elastic composition due to the included microwax. This component keeps wood from cracking, atmospheric precipitation and other phenomena. The layer obtained after staining prevents the formation and appearance of biological agents on the wood.

Biocolor Ultra is a thixotropic composition, it is easy to apply and adheres strongly to wooden material. There are 8 shades in the palette in this paint. But you can tint the colorless composition with pastes.

Photo: wall wooden house from a bar, painted (painted) Neomid biocolor Ultra looks very good and perfectly protects the wooden structures of a log house from a bar from negative harmful factors environment.

Thematic video:

Color range of Neomid Biocolor Ultra:

Photo: Neomid biocolor ultra good colors.

Where in Moscow to buy this high-quality paint for wood?

The store of our company "Winter House" is located near the Moscow Ring Road at the address here. We are waiting for your calls and visits to our Moscow trading shop - office.

Protecting wooden buildings from the harmful effects of the environment and biological pests is an important task for every homeowner. Folk methods treatments give a short-term and mild effect. Construction experts unanimously agree that for outdoor work it is best to buy professional tools special purpose. Compositions from the Pinotex series are high-quality antiseptics that can reliably protect a wooden house from the outside and inside for many years.

1. About company
2. Advantages of impregnation
3. How to apply?
4. Comparison of Aquatex and Pinotex
5. Prices and product description

Brief success story

In the middle of the last century, the traditional construction of wooden houses became noticeably more active. Urban residents began to move away from megacities more often, even for a short time. Proximity to nature, solitude and silence gave rest to the body and revived the harmony of the soul.

But buying organic housing brought problems. technical order. Homeowners soon had a legitimate question: how to reliably protect natural wood from damage and extend its life? The innovative development of Sadolin & Holmblad Ltd came to the rescue. - antiseptic for Pinotex wood processing.

The successful Danish company has specialized in the production of paints and inks for many decades. In the early 1950s, she began to modernize existing materials. The result of lengthy laboratory tests was the new product Pinotex, which was presented to the whole world in 1958. The binder for the impregnation was an alkyd resin from linseed oil, the solvent was white spirit. Coloring pigments in the form of natural iron oxides were also added. In addition to the decorative function, the additive provided reliable protection from ultraviolet radiation.

In a short period of time, Pinotex received wide use in Europe, where it was unanimously recognized by consumers as the most reliable and clean means of external wood protection. Currently, the development and modernization of all types of antiseptics is carried out by the largest transnational corporation AKZO NOBEL, which includes Sadolin.

Benefits of using

The purpose of antiseptic treatment of wood is not only reliable protection against biological effects, but also a decent appearance of a residential building. Consistent application of several products helps to solve these problems. First, the wood is impregnated from the outside with a primer that penetrates into the deep layers. Then a topcoat is applied on top.

As a result of outdoor work, the multiple effect of Pinotex is achieved:

• protection of wood from rot, mold, blue;
• reliable barrier to precipitation, sunlight and external pollution;
• significant reduction in moisture absorption;
• increased wear resistance;
• vapor permeability;
• emphasizing the aesthetic merits of the texture;
• long-term preservation of the natural color of the tree.

Impregnation is especially recommended for use in the finishing of polished wooden surfaces. Pinotex well forms a beautiful layering, similar to lacquered. The palette of the product consists of six shades, allowing you to choose the material to your liking. Antiseptic composition recommended for use for protective work on wooden facades, railings, awnings, log structures, windows, doors.

During painting work, the impregnation does not splash or drip from the brush, which significantly reduces the overall consumption. It dries quickly, is securely fixed on the surface and does not peel off during operation.

Processing technology

Outdoor work consists of several stages. Compliance simple rules contributes to the rapid implementation of high-quality impregnation and reduce the consumption of Pinotex.

1. Preparation.

Cleaning is carried out only on a clean, dry tree that does not have fungal damage. Dust, soot, dirt and organic matter can be removed with a stiff brush or wood cleaner. Mold is well removed with bleach. If there are leftover paintwork materials outside, then they are cleaned with a metal scraper, burned with a blowtorch, or removed with chemical solvents. Remains of resin are removed from the surfaces of coniferous wood. Cracks in the boards and between them are sealed with a seam sealant. Nail heads, connecting brackets and other metal products are cleaned of rust and coated with special-purpose paint.

2. Priming.

A layer of colorless soil is applied to the prepared plane of the tree. Particular attention is paid to the ends, carefully soaking them until completely saturated. Re-priming is carried out in a day.

3. Coloring.

The coating is done in 1-2 layers. In order for the wood to get a uniform color, it is recommended to evenly walk over the surface with a dry brush within 10-15 minutes after the end of work.

What is better to buy - Aquatex or Pinotex?

The purpose of the domestic product is similar to the foreign analogue Pinotex: protection of the tree from biological damage, antiseptic treatment and decorative finishing.

Distinctive features of Aquatex:

• the color palette of paints consists of 15 shades;
• antiseptic coating does not require preliminary priming;
• processing of a damp wooden plane is allowed;
• outdoor work does not depend on the vagaries of the weather and takes place within positive temperatures;
• in the composition of the protective agent, a reduced content of harmful organic solvents;
• low consumption - 1 l of impregnation is enough for 7-10 m2 of planed wood and 4-5 m2 of sawn wood;
• the affordable price of products is dictated by the presence of our own production facilities and the low cost of the main components.

According to consumer reviews, Aquatex has a sharp, persistent odor, so it is advisable to use it only outside. For complete drying, a long time is required - 1-3 days.

Aquatex protective and decorative coating is an excellent economy class product. Pinotex impregnation is a quality of increased cost, confirmed by time.

Pinotex product features

The Pinotex brand product line consists of a voluminous list of solutions created for better care behind wooden surfaces. The use of specialized protective equipment one brand guarantees excellent results and economical consumption.

Products	Description	Pinotex consumption, 1l/m2 (planed/unplaned wood)	Packing, l	Price, rubles
Base	Colorless primer of deep penetration and reliable protection against fungal infection. Recommended for facade works, increases adhesion of finishing coatings.	10/8	1310	280-460,
Ultra	Composition with UV filter. Gives elasticity and prolongs the durability of planed products.	12/8	1310	430-590,
Doors & Windows	Quick-drying impregnation, increases moisture resistance, resistance to pollution, UV irradiation. An antiseptic is recommended for processing window and door frames.	13/11	1310	400-650,
Classic	An outdoor decorative product that enhances the natural texture of wood. Well protects unplaned surfaces from biological aggression.	16/9	1310	360-450,
Wood Primer	Colorless water-soluble primer. Enhances bio-resistance. Recommended for outdoor use.	10/6	1310	380-660,
wood oil	Wood protective oil, well absorbed into the base, does not leave a greasy film. It has water-repellent, fungicidal qualities, enhances resistance to friction.	18/13	12,7	330-520,
Terrace Oil	Oil for the treatment of surfaces subjected to constant loads (stairs, terrace, bridge). Well protects from bad weather, increases wear resistance.	18/13	2,254,5	880-1440,
Interior	Water-soluble impregnation for internal works. Does not contain fungicides.	16/8	1310	260-370,
natural	Wear-resistant protective agent with UV filter. Virtually does not change the natural color of the tree.	12/7	1310	390-600,

Isn't it all the same for a fence? If - Pinotex is no longer Finnish for a long time, but stands as a brand. Aquatex seems to be no worse in properties and costs less. It remains to paint two ends of the fence and this is 320 m2. With a brush already for .... I will be a garden sprayer.

Discussion closed by moderator

Beard 535 26.09.2007, 10:54 #

The essence of Aquatex - it is on the water - is the best fit for raw building materials sold in bulk. Just what you need.

Andrey (Tempra SX) 26.09.2007, 11:42 #

There are some kind of paraffins, they get worse in the sun, and Pinotex is a harsh chemical, as a chemist neighbor explained to me. Kills all living things on the spot. But it stays strong. Doing it yourself is not healthy for the skin. And Aquatex is nicer to me purely for environmental friendliness. He's more harmless. I don't know about reliability. In August, he only painted them.

*Otec* 26.09.2007, 10:46 #

Aqua, optimal

Do not bring confusion: "AQUA" and "Aquatex" are a priori different substances!

"AQUA" - colorless water-based varnish. Used for interior surfaces.

"Aquatex" - and nutryanka and OUTDOOR. And it's also tinted.

Duke, itoito...

*Otec* 26.09.2007, 10:52 #

One-of-a-kind - AQUATEKS. Iba is very good friends with water.

Volodymyr 09/26/2007, 10:38 #

I have no complaints about Aquatex /+/ Three fences, painted with Aquatex, stand and do not require repainting - the “longest” has already gone for 5 years.

The only place where it "got bad" was the south side of the trailer wall - some boards began to peel off, but there IMHO any paint would peel off - they painted on damp wood and these boards did not absorb paint (shone right away) ...

00007 26.09.2007, 10:46 #

Thanks, got it

I have no complaints about Pinotex (both huts are painted with Ultra, no changes in coverage in a year. The usual one has been kept in the bath for 3 years, it rains with might and main, well, once every 5 years, repaint everything

just like that 09/26/2007, 10:33 #

From personal experience Aquatex is much worse than Pinotex, even if it is Estonian.

and this - and that - garbage ... so the staff is the same :-)))

Wooden fittings are widely used in construction, as they are durable, beautiful and relatively cheap.

But, despite these qualities, the tree is very susceptible to moisture or pests (rats, insects).

However, this problem is solved quickly, since there is a very large range of impregnations, which are created in order to avoid damage and protect the tree from such harmful effects.

The main share in the sale is occupied by impregnations from moisture, since it most often affects wooden structures.

Purpose

Moisture and insect antiseptics are relevant for any wooden structures: fences and fences, residential buildings, log cabins, cellars trimmed with wood.

They are used as a standalone product, but can also be mixed with a primer coat of paint for joint use.

Impregnation is sometimes produced in a mixture with tinting agents, such agents give the tree an aesthetic and noble appearance.

Types of impregnation for wood

All impregnations according to their properties are divided into:

1. Antiseptics for fire protection. Due to the action of such means, the tree does not ignite upon direct contact with fire. Such antiseptics perfectly drive away insects. They consist of environmentally friendly substances, so they can be used everywhere, their duration of exposure is limited to five to seven years.
2. Antiseptics that prevent rot and mold. They have a colorless texture, which perfectly protects the "facial" wooden structures from moisture and, as a result, mold.
3. Antiseptics for protection and toning. Coloring agents are mixed into their composition. Aesthetics and protection against all possible lesions are guaranteed.

Informative video on how to choose the right impregnation for wood.

Enjoy watching!

Interior and exterior decoration of buildings using wood has become very popular. This material has an attractive appearance, is natural, safe, and has excellent thermal insulation characteristics. But in order for all external data and its properties to be preserved for many years, you need to take care of this in advance and provide it with the necessary protection.

To do this, you can use paints for wood, which are now available in a large assortment. Many of them are able not only to preserve the former appearance of wooden materials, but also to provide them with reliable protection from the effects of biological pests. These are Pinotex and Aquatex, many are lost when choosing a paint between these two compositions. So which drug is the best?

Pinotex is intended to ensure proper protection of wood from the adverse effects of atmospheric conditions and microorganisms dangerous to it. And also for obtaining a finishing decorative coating on a wooden material. Pinotex paints are produced by an Estonian manufacturer. Paints of this brand are produced mainly for outdoor use, but there are also for painting wooden materials indoors.

Pinotex paint has high elasticity, it does not crack from changes in air temperature and movement (breathing) of wooden material. The composition of the paints includes fungicides that prevent the infection of wood with biological agents, as well as protect against the invasion of pests. Pinotex provides moisture resistance to wooden material, moisture can lead to its deterioration and rotting processes. With the help of Pinotex paint, you can improve the appearance of a wooden material without changing or hiding its structure. These compositions are produced in 10 shades, which are allowed to be mixed. Also, if desired, you can tint the paint in 30 colors using special pastes.

The composition of Pinotex paints is easy to apply. But you need to work only with cleaned wooden surfaces. They should not have an old paint coating, resins, mold, fungi. It is desirable for efficiency and reliability to pre-prime the wooden material carefully. The composition should be applied with a brush along the wood fibers. Before use, Pinotex paint must be diluted, it is enough to mix it well.

Photo: Aquatex extra wood paint is considered to be of better quality than just Aquatex (without the extra prefix). Aquatex paints are made on an alkyd basis. Their manufacturer is the Russian company Rogneda. These funds gained popularity in the construction market among buyers due to their qualitative composition. They include alkyd resins, antiseptic additives, pigments and organic solvents. The very composition of paints is complex and includes a large number of components. They are suitable for processing wood of any kind indoors and outdoors.

Aquatex paints create a protective film that does not change the texture of the wood material. The antiseptic substances included in their composition prevent the formation of mold, fungi and insects on the surface of the wood. Also, Aquatex products protect wooden material from the adverse effects of sunlight. The coating obtained after painting is vapor-permeable, it does not prevent the wood from breathing. Paints are able to protect wooden material from moisture and fading, prevent cracking and decay. Aquatex paints are available in 15 shades, which can be mixed if necessary.

The coloring of wooden material with Aquatex paints is of high quality. Apply this composition to clean and moderately damp wood (moisture percentage should not exceed 40%). All dirt and previous coatings of varnish or paint must be removed. The paint does not spread and can be applied with a roller or brush. The composition of Aquatex does not need to be diluted, it is sold already in a form ready for use. It is recommended to paint wooden material in several layers to get a rich and uniform shade. The resulting coating does not fade and can last in excellent condition for at least 5 years.

Pinotex and Aquatex: which composition is better

It is difficult to say which paint composition among Aquatex or Pinotex is better. The advantage of Aquatex paints is their domestic production, hence their low cost. Pinotex has good quality characteristics. But it is produced by a foreign manufacturer, which affects its price. But Aquatex also has a drawback, it contains organic solvents that spoil the environmental characteristics of the material. Although the manufacturers claim that their paints are not capable of harming human health, they should not be used in residential areas, in rooms such as bedrooms, nurseries, etc.

Our opinion: it is best for you to buy an excellent paint for wood Neomid Biocolor Ultra!!!

For painting a residential wooden building, it is better to purchase Neomid Biocolor Ultra. This glazing agent can be used both for interior painting of sawn and planed wooden surfaces and for exterior. Domestic manufacturers Neomid took care of the safety of the composition, it is made on the basis of alkyd varnish. You can use this product from Neomid for decorative and finishing. After applying Biocolor Ultra paint, a translucent, semi-gloss layer is obtained.

The composition of the paint contains a filter of ultraviolet rays in this glazing agent, with the help of which the previous shade of the wood is preserved. Biocolor Ultra is an elastic composition due to the included microwax. This component keeps wood from cracking, atmospheric precipitation and other phenomena. The layer obtained after staining prevents the formation and appearance of biological agents on the wood.

Biocolor Ultra is a thixotropic composition, it is easy to apply and adheres strongly to the wood material. There are 8 shades in the palette in this paint. But you can tint the colorless composition with pastes.

Photo: wall of a wooden house made of timber, painted (painted) Neomid biocolor Ultra looks very good and perfectly protects the wooden structures of a timber frame from negative harmful environmental factors.

Thematic video:

Color range of Neomid Biocolor Ultra:

Photo: Neomid biocolor ultra good colors.

Where in Moscow to buy this high-quality paint for wood?

The store of our company "Winter House" is located near the Moscow Ring Road. We are waiting for your calls and visits to our Moscow trading shop - office.

Wood - great material for decoration, but, unfortunately, not durable. To prolong its service life and maintain its appearance longer, a variety of protective agents are used that differ in composition and mode of action. One of these tools is Pinotex, widely used in both private and industrial construction.

The Pinotex trademark combines a whole line of deep penetration wood protection compounds - antiseptics, impregnations, primers, oils, paints. But most often this name means an alkyd-based tinting antiseptic.

The Pinotex brand is owned by the Swedish-Finnish concern Akzo Nobel, and its products have been holding leadership positions in the European market for many years. The advantages of protective equipment of this brand are obvious: low consumption, high quality covers, excellent decorative properties. In addition, for each stage of wood processing there is a separate composition, which necessarily contains fungicides.

Characteristics and types of compositions

Pinotex for outdoor woodwork is conditionally divided into three types: primers, compositions for facades and compositions for doors and windows.

Priming mixtures

Primers contain the bulk of antiseptics, and in combination with a top coat, they are able to provide maximum protection for wood from decay. At the same time, the use of primer before applying other Pinotex compositions is not a prerequisite, and many do without it. This is justified in cases where the outer surfaces are protected from direct exposure to precipitation and the risk of mold is minimal.

But the treatment with a primer itself, without the use of additional coatings, provides protection for only up to 3 months when applied in the summer, and about 5 months in the cold season. The fact is that the film that the soil forms on the surface of the tree is not strong enough and is gradually washed off in the rain and snow. It also has low UV resistance, so upper layer material quickly fades in the sun.

Primers Pinotex

Name	Purpose	Main characteristics
	Treatment of sawn and planed wood from biocorrosion. Used as part of the Pinotex decorative and protective coating system	Colorless, deep penetration compound with high adhesion. Applied with a brush in 1-2 layers, dries in 24 hours. Consumption for sawn wood is 160-175 g/m2, for planed wood - 100 g/m2
	Treatment of wooden exterior surfaces from rot, mold, blue. Part of the Pinotex Doors & Windows system	Colorless water-soluble composition, penetrates deep into the structure, has high adhesion. Applied with a brush in 1-2 layers, dries in 24 hours, consumption is up to 180 g/m2 for sawn wood, 100 g/m2 for planed

Primer Pinotex Wood Primer (Wood primer). Download file

Compositions for facades

These products, in addition to antiseptic properties, have increased resistance to atmospheric influences and ultraviolet radiation. They penetrate deep into the structure of the tree, give the fibers a more intense color, form a film resistant to abrasion on the surface. Subject to the technology, the surfaces treated with these compositions retain a magnificent appearance for 8-10 years.

Compositions for facades	Purpose	Main characteristics
	weather resistant protective impregnation(stain), used together with Pinotex Base primer. Emphasizes the natural beauty of the material, gives color to the texture	Semi-matte finish, contains active ingredients against blue stain and fungus. The color palette includes 9 wood shades. It is applied with a brush in 2-3 layers, interlayer drying for 12 hours, complete drying - a day. Consumption for sawn wood is 9 m2/l, for planed wood - 16 m2/l. Service life of the coating is about 6 years
	Protective and decorative impregnation, provides the material with resistance to weathering and emphasizes the texture	Water-soluble composition containing wax and wood oil. Palette includes 120 color shades. It is applied in 2-3 layers, interlayer drying is 8 hours, full - 16 hours. Consumption for sawn material - 8 m2 / l, for planed - 15 m2 / l. Service life - up to 7 years
	Varnish based on alkyd-urethane, designed for the treatment of bases exposed to intense moisture and mechanical stress	Colorless composition with a glossy and semi-gloss degree of gloss. Forms a very durable coating with water and dirt-repellent properties, does not sag, and is easily distributed over the material. It is applied with a brush or a special applicator in 2-3 layers. Interlayer drying takes 4 hours, complete drying - 48 hours. Consumption is about 15 m2/l
	Decorative impregnation with protective functions. It is used together with Pinotex Base primer, gives the material a richer woody shade, prevents fading	Colorless formulation with UV stabilizers and UV filters. It is applied with a brush in 2-3 layers, interlayer drying takes 12 hours, complete drying - a day. Consumption for sawn wood 8 m2/l, for planed wood - 12 m2/l
	Protective agent with the highest resistance to negative effects. Recommended to be used in combination with Pinotex Base.	A water-soluble compound that forms a very strong coating that is resistant to freezing, moisture, fading and fungal attack. The color palette includes more than 60 wood shades. It is applied with a brush in 2-3 layers, interlayer drying 12 hours, full - 24 hours. The service life of the coating is up to 12 years. Consumption for sawn wood is 8 m2/l, for planed wood - 12 m2/l
	Impregnation with decorative and protective functions. Designed to treat wood against mold, algae, exposure to precipitation and ultraviolet radiation. Used systemically with Pinotex Base primer	Semi-gloss composition with a high content of active additives. The service life of the coating is up to 8 years. It is applied with a brush in 2-3 layers, interlayer drying - 12 hours, full - 24 hours. Consumption for sawn wood is 8 m2/l, for planed wood - 12 m2/l

Compositions for doors and windows

Impregnations and varnishes of this group are specially designed for surfaces that are simultaneously in contact with both external and internal environments. Window and door frames are most susceptible to deformation from moisture and temperature changes, rotting, and fungus appears on them more often. The mechanical impact also means a lot, from which ordinary paint is quickly erased or covered with microcracks. Pinotex antiseptic impregnations eliminate such problems and preserve the original appearance wooden structures within 6-8 years.

Name	Main characteristics
	Water-soluble impregnation with active ingredients against mold and blue stain. It is applied together with Pinotex Wood Primer, provides protection against an ultraviolet and rainfall. After applying the impregnation, the painted surfaces do not stick together. The composition is applied with a brush in 2-3 layers, interlayer drying is 4 hours, complete drying - after 12 hours. Consumption for sawn wood - about 11 m2/l, for planed wood - 13 m2/l
	Water-soluble tinted varnish. Forms a smooth, elastic coating with water and dirt-repellent properties. Emphasizes the natural texture, is easily distributed over the surface, does not leave streaks. The color palette includes 44 wood shades. The treated material is resistant to scratches and other minor damage, impact detergents and erasing. The covering does not crack and does not turn yellow from time to time. According to the degree of gloss can be matte and glossy. Apply with a brush in 2-3 layers, dry for 4 hours, consumption is 13 m2/l

All the compositions described above are used for open surfaces that are directly exposed to weathering. But there is a separate tool for hidden wooden structures, such as logs, rafters, crates for facade cladding. This is Pinotex Impra impregnation - a water-soluble composition with biocides. It has the ability to quickly penetrate deep into the structure and evenly distributed between the fibers. The structures processed by him are practically not affected by rot, mold, insects.

Pinotex Impra is not suitable for open surfaces, since UV radiation destroys biocides and completely deprives the impregnation of its antiseptic properties. The composition is easily distributed, does not drip, dries for about 2 hours. It is applied with a brush in 1-2 layers, the consumption is 10 m2/l for sawn wood and 14 m2/l for planed wood.

Rules for processing wood with Pinotex

Surface preparation

Pinotex compositions are most effective when processing new wood. If the material has already been impregnated or painted with something, the antiseptic will not be able to penetrate deep into the structure, and the protective properties will decrease. This is especially true for wood treated with drying oil. Likewise, it decreases decorative effect, because the texture of the fibers has already undergone changes, and it will not work to return the original natural beauty of the tree. But this does not mean at all that Pinotex cannot be used for such materials - it is suitable for any wooden surfaces, the main thing is to prepare them correctly.

1. If this new wood, it must be dry (the maximum allowable humidity is 20%), without greasy stains, fungus-infected areas. If you notice stains, be sure to remove them with whatever solvent is available. The places affected by the fungus must be thoroughly cleaned and the diseased fibers scraped out to a clean base.

   

2. When choosing conifers wood, be sure to inspect the material for resin secretions. The resin prevents the penetration of impregnation and leaves on decorative coating not very aesthetic marks. Having found such places, you need to cut off the resin with a knife and carefully treat the base with white spirit or turpentine. Further, the surface is recommended to be sanded with an abrasive nozzle to improve the appearance of the material and facilitate the absorption of the soil.

   

3. For a previously treated tree, the preparation process begins with the removal of the old coating. If the paint peels off easily, you can use a scraper or wire brush. For greater efficiency, it is recommended to warm the surface building hair dryer. If the coating is held tightly, another method is more suitable - treatment with a chemical wash. The product is applied to the surface in an even layer, left for a while and then scraped off everything without much effort. At the end, the tree must be washed clean water and dry in the open air.

   

   

   

4. The tree impregnated with drying oil must be cleaned of dust and dirt, washed soapy water, then rinse clean and dry. The areas eaten away by bugs, as well as rotten and cracked elements, must be replaced, since it is pointless to process them with Pinotex. Metal parts, such as nail heads or staples that hold wood together, should be sanded and coated with a metal primer.

   

   To seal wormholes and recesses, you need to choose a wood putty of the appropriate shade. If the color does not match, it is clearly visible under the transparent impregnation, which negatively affects the decorative effect of the coating.

   

5. Boards affected by blue or gray from time to time should be treated with a special bleach, for example, Neomid 500, Oxide, Senezh or Ecosept 500. The agent is applied to the wood in a continuous layer with a brush or spray, and left for 2-12 hours, depending on the degree defeat. After that, the material is rinsed with water and dried.

   

   

Ground application

It is recommended to prime the surface with Pinotex in dry, calm weather at a temperature of 18-20 degrees and an air humidity of not more than 80% (optimal value of 65%). At temperatures above + 25 ° C, the moisture from the primer evaporates too quickly, and the composition does not have time to penetrate to the desired depth of the structure. The same thing happens when processing surfaces heated by the sun: getting on a hot tree, the soil begins to set in a matter of minutes and forms a thin, weak film on the wood. Such a coating is easily erased and cannot provide reliable protection against the penetration of microorganisms. That is why for processing facades with south side you should choose a cloudy day or primer in the late afternoon, when the activity of the sun's rays decreases.

Pinotex primer is a ready-to-use solution, and therefore it does not need to be diluted with anything. Most often used for application paint brush with a dense synthetic pile of medium length.

Step 1. The primer is thoroughly mixed in a container, the brush is dipped to half the length of the pile and applied to the surface along the wood fibers. The layer should be continuous and as uniform as possible, the composition should be rubbed well on the wood.

Step 2 Having processed straight surfaces, they move on to the end sections. Here the soil should be applied more abundantly so that the sections are well saturated. Individual elements small size it is most convenient to process by dipping into the solution.

Application of a decorative coating

Between priming and finishing, at least a day must pass so that the primer is completely dry. Requirements for environmental conditions remain the same: humidity 65%, air temperature 18-20 degrees, shading from direct sunlight and no wind.

Chosen composition for finish coat mix well and apply in a continuous layer along the fibers. The layer is made as thin as possible, rubbed well on the wood with a brush so that there are no sagging. For a pronounced effect, 2-3 layers are required, which are applied at regular intervals. The interlayer drying time must be indicated in the manufacturer's instructions, so carefully study the information on the package.

On this, the processing of wood by Pinotex is considered complete. If everything is done correctly, it will be necessary to renew the surface no earlier than in 5-6 years, or even all 10, depending on the type of coating. For re-treatment, it will be necessary to clean the base from dirt and dust, lightly sand it with fine sandpaper and again cover it with Pinotex impregnation in 2-3 layers.

Video - Pinotex for outdoor woodwork

Video - Application of the Pinotex composition

Wood is one of the first materials that people began to use. Being a 100% natural material, it occupies a leading position in modern construction. Wood has good heat and sound insulation. It has a high coefficient of vapor permeability, which contributes to the establishment and formation of a good microclimate in the house.

At the same time, wood is also subject to negative influences, such as:

• mold;
• mold fungi;
• rot;
• blue;
• dampness.

To avoid problems with wood and improve its resistance to negative effects, paintwork materials (LKM) should be used. Modern coatings provide protection for wood, while maintaining its natural characteristics.

Why choose Pinotex?

The development of the Pinotex brand began in the 50s of the last century in Denmark by Sadolin & Holmblad. The material was developed on the basis of alkyd resin and white spirit, iron oxides were used as a pigment.

In the early 60s, the brand entered the Danish market, then Germany, Sweden and Finland, where construction wooden houses was very popular. The company has developed the entire product line for wood protection, from antiseptics and fire retardants to paintwork materials. In the early 70s, Pinotex products were recognized by European consumers as the most reliable and environmentally friendly wood protection material. Reviews about Pinotex guaranteed her a confident place in the market. At that time, Pinotex paint was only available in a few colors:

• colorless;
• ebony;
• nut;
• teak;
• Pine.

Over time, the color gamut has expanded and now it is more than a dozen primary colors and about forty tones.

Product classification

Brand products are presented at all stages of wood processing, from impregnation to finishing. We characterize the main types of products.

PINOTEX BASE - antiseptic primer based on alkyd resin, colorless. It dissolves well with white spirit. It is applied only to external works. It is used for impregnation of sawn and planed wood. For sawn wood, the consumption is 100-200g/m2, for planed wood - 80-130g/m2.

PINOTEX CLASSIC - wood paint based on AMA-alkyd. Contains fungicides. It has excellent adhesion and penetrating properties. It can be used both with pre-treatment of wood with antiseptics, and also as a separate material. It is applied at external works to decorative furnish. Paint color according to the Pinotex color chart. The surface acquires a matte or semi-gloss structure, depending on the number of layers.

PINOTEX ULTRA - designed for external finishing works. Based on AMA-alkyd, contains fungicides and a UV filter. It has good adhesion to wood. Forms a transparent moisture-resistant film on the surface. Paint color according to the Pinotex color chart. It is recommended to use for planed wood with pre-treatment with antiseptics and a primer. Do not use material for staining wood with traces of fungal diseases.

PINOTEX FENCE - outdoor paint wooden products. Pinotex Fense contains fungicides that prevent the appearance of fungal wood diseases. The paint can be used without prior antiseptic treatment of wood, it emphasizes the structure of wood well. Colors are used according to the Pinotex palette.

PINOTEX INTERIOR - water based paint. It is used for interior finishing of wooden surfaces. Pinotex Interior penetrates deep into the wood structure, forming a protective water-repellent layer. The base color is transparent. The paint is tinted, for this they use more than 10 basic and about 40 additional shades.

PINOTEX NATURAL - alkyd paint for outdoor use. Has a small amount of pigment that emphasizes the structure of wood. Contains additional active substances - fungicides. Stabilizers, which are contained in the paint, increase the resistance to UV radiation and sunlight.

PINOTEX WOOD PRIMER - antiseptic. Water-based, colorless. Used for outdoor work. Pinotex Wood Primer is used for pre-treatment of wood with subsequent finishing. Alkyd emulsified in water is used as a binder in the material.

PINOTEX DOORS & WINDOWS is a water-based hybrid acrylate and alkyd emulsion paint. As the name implies, the main scope of application is doors, windows, terraces. Pinotex Dors paint forms an elastic yellowish protective film on a wooden surface. The paint is tinted according to the Pinotex color chart (about 50 colors and shades).

PINOTEX TERRACE OIL - oil paint for wood from the Pinotex brand. The basis uses natural and modified oils. Used for outdoor decorative trim wooden surfaces and to reduce the influence of atmospheric precipitation. Increases wear resistance of surfaces. Oil-based paint contains wax, which makes the surface water-repellent. Previously, the wooden surface must be treated with a deep penetration impregnation with PINOTEX BASE. Pinotex Terrace Oil is a colorless paint and can be tinted to the desired color.

PINOTEX WOOD OIL SPRAY is a paint based on natural and modified oils. Used to cover an additional layer of wooden products, affected atmospheric phenomena, also used for interior work. The spray has excellent covering ability - 4-5m2/l.

PINOTEX IMPRA - antiseptic, wood impregnation. For outdoor work only. Pinotex Impra "works" well in a humid environment, providing reliable protection of wood from rot and blue, excellent for wood in a humid environment. Use in structures that are not exposed to direct sunlight, as UV destroys the protective properties of biocides. Used to process lag floors, elements truss systems. The product is applied with a richly moistened brush or by dipping. After drying the material, no additional processing is carried out. The treated surfaces do not require maintenance.

Preparing and painting a wooden surface

cleaning

The surface on which the paint is applied must be dry (moisture content of the wood is not more than 20%), clean, without traces of fungal infection or blue. Depending on the type of pollution, you need to choose required method surface cleaning:

• physical - scraper, hard brush, sandblaster;
• thermal - hot air, infrared treatment;
• chemical - various means paint removal.

Padding

To ensure maximum adhesion of paint to wood and increase the protective effect of the coating, it is desirable to treat the wooden surface with a primer. For this purpose, a colorless deep penetration primer Pinotex Base is used. It is abundantly applied to the surface, Special attention must be given to the ends of the tree. They are soaked until completely saturated. Coloring should be done no earlier than after 24 hours, for horizontal floorings, extend the drying time of the primer for another day.

Coloring

Coloring is performed in 1-2 layers. With an increase in the number of layers, the surface color becomes darker, more stable and glossy. Coloring should be carried out at an air temperature of +5…+30°С, optimal +18±2°С, at a relative humidity of less than 80%. Apply paint along the fibers, carefully process the ends of the product, this will significantly improve the resistance of wood to moisture. To lighten the paint, you can add up to 30% of the colorless Pinotex base to it. To ensure a uniform uniform color, 15-20 minutes after applying the paint, it is necessary to draw a dry brush over the painted surface.

All Pinotex paints are ready to use and do not require dilution. Complete drying of the paint in 36-48 hours after application.

Antiseptic "Pinotex" is produced by the Estonian company Pinotex. This wood processing agent has been known in our country for half a century and is famous for its excellent quality. On the one developed in last years The company gives a 12-year warranty!

A wide range of paints, varnishes, impregnations, oils, primers are presented. They are used in wood processing to protect wood products from biological and physical damage both inside and outside buildings, maximizing the life of structures while maintaining the natural beauty of wooden surfaces. Focusing on the feedback and wishes of customers, the company regularly improves production technologies, developing a new composition of products.

Key features

Means "Pinotex" penetrates deep into the structure of the tree, creating a unique protective layer which is only a few millimeters thick. In addition, it differs from many cheap analogues in that after impregnation with outside buildings on the surface is created protective film. Moreover, it can be matte or glossy. You can choose according to your taste. The intensity of gloss depends on the number of layers applied and the time elapsed since painting.

Impregnation-antiseptic enhances the waterproof properties of materials, increases resistance harmful effects environment. The antiseptic reliably protects against rotting, fungus, mold. It is included in many building materials produced by the company. The quality of this antiseptic is time-tested and does not require additional advertising.

"Pinotex" for outdoor work

Pinotex is one of the few companies that produces the same quality products for both indoor and outdoor use. Exterior paint must be resistant to ultraviolet rays, to atmospheric aggressive environment. Therefore, it contains alkyds and acrylates, being at the same time an antiseptic. A heat- and water-resistant film on wood after painting is formed due to the fact that water evaporates, on the basis of which the emulsion is made. The film consists of polymerized substances that form a strong protection for wood. For outdoor work, the company offers Pinotex Ultra for protecting wooden surfaces from the outside, which is superior in quality to many products manufactured by the company in this category.

"Pinotex Ultra"

This tool, penetrating deeply into the structure of the tree, guarantees protection for 10 years. Ideal for log houses as well as processed wood products. The agent protects the surface from the negative effects external environment and insects. Thanks to the latest developments in the creation modern means protection, wood coated with an antiseptic for ten years successfully resists the sun, rain, snow, frost.

The protection complex also includes additives against mold, rot, algae, bark beetles. The composition of "Pinotex Ultra" is the result of the latest developments in AWB technologies. Thanks to minimum size particles of the composition (less than 0.00025 mm), they quickly and actively infiltrate into the pores of the tree, but are washed out much more slowly than larger particles. In addition, the new technology of adding a reinforced UV filter made it possible to strengthen the light-resistant pigments of the antiseptic and increase its service life.

To enhance the effect helps to use it in combination with the preliminary primer "Pinotex Ultra Base", however, you can cover the tree without it. Active fungicide additives prevent the formation of rot, fungus, and the penetration of wood pests on the surface. Important for the owners of houses under construction is the fact that when wood is impregnated, "Pinotex" preserves its natural beauty and emphasizes the natural pattern. The elastic polymeric film formed by the antiseptic preserves for a long time the properties inherent in the treated wood. bright hues, it is not destroyed by temperature changes and drops, as a result of which volumetric expansion of the film often occurs. The ability to preserve the decorative properties of wood is one of the most important advantages of Pinotex products. The method of applying it is quite simple: use brushes or spray.

"Pinotex" for interior work

"Pinotex" for interior work does not contain substances that, when evaporating, are harmful to human health. Unlike outdoor products, it is produced in the form of an aqueous alkyd emulsion that does not close the wood pores and allows the wood to breathe, creating a comfortable microclimate in the house. After application, the water evaporates, and the composition of the product penetrates deep into the structure of the tree, protecting it from moisture and sunlight. Antiseptic for interior work guarantees safety light color wood within 5 years after application. Pinotex for indoor and outdoor use is produced in five basic colors, each of which, in turn, can be tinted into different colors and shades. This type of "Pinotex" is extremely decorative and can be used when painting furniture inside residential premises.

The main advantages of paint "Pinotex Classic"

"Pinotex Ultra" is similar in action to the antiseptic of the previous generation of paints of the "Classic" series. However, their scope is slightly different. Paint "Pinotex Classic" should be used for sawn wood, and "Pinotex Ultra" manufacturers recommend using for planed wood and log houses. In addition, the number of protective components that counteract UV rays has been increased in the "Ultra" series of products, which prevents early darkening. wooden walls. The most demanded packaging of antiseptics "Pinotex Classic" and "Pinotex Ultra" 10 liters.

Color spectrum

For outdoor use, the color "Pinotex Ultra" (Oregon) is most often chosen, which gives the tree a light brown color of slightly reddened pine. This color is preserved for a long time in the atmospheric conditions of the street, does not darken, looks great on log houses surrounded by greenery. For interior work, most often choose the colorless "Pinotex" or the color of golden pine, which brings out the natural beauty of the tree to the maximum and reliably preserves it for several years, regardless of the action of sunlight and moisture.