Running meter. Linear meter of the kitchen: we calculate the cost and how to save money wisely

1 running meter- the average price of a meter in length. Used when calculating the cost of a product to order for 1 meter.

Linear meter of the kitchen- a meter in length, this is a CONDITIONAL UNIT OF MEASUREMENT OF THE KITCHEN of a standard small kitchen with minimum set elements. And this means the conditional price per meter, which usually includes: a kitchen made of chipboard, without finishing, with a minimum internal filling of cabinets, lower and upper cabinets with hinged doors, 1 shelf, countertop, a bar for hanging shelves. Sometimes they include plinth, handles, plinth.

Before buying a kitchen

We ask what this shop includes in the standard running meter and what height the standard is;
We measure the length of our kitchen and choose the height!
We multiply the length of the kitchen by the running meter at the selected height.

Linear meter of the kitchenit is a meter of kitchen furniture installed along the wall. Often the length is called the width of the kitchen and vice versa, but it is important to understand that this is a kitchen from one end to the other when you look at it from the front. (left to right or right to left). That is, the longest part of the kitchen (length).

How do sellers initially consider a running meter of a kitchen? A standard kitchen is taken with a minimum set of drawers, minimum height and the minimum length and width and its value is considered, then divided into meters. (For example, a 3x2 kitchen costs 10,000 rubles, then a running meter will cost 3,333 rubles, respectively, if there are more meters, and drawers and kitchen heights, other material, then the price is greater.) The length of the kitchen is multiplied by the cost of a running meter, which Each store has its own rules.

Manufacturers often include the simplest and cheapest materials in a running meter of a kitchen.

The cost of a running meter of the kitchen is NOT included: backlight panel, socle, cornice, wall panel, wall plinth, sinks, ovens.

Running meter - how much? The nuances of the calculation

Before going to the store, measure the length of the kitchen on the plinth.

Ask what is included in the standard kitchen, according to which the linear meter of the kitchen set was calculated.

When calculating, the low version of the kitchen is taken (up to 72 cm), and the most dimensional parts of the kitchen.

You can find out the price of a running meter of a kitchen by dividing the cost of the kitchen by a meter of the kitchen along the length (along the wall).

You can find out the price of a custom-sized kitchen by multiplying the length of the kitchen set by the cost of a running meter of the kitchen (but you need to take into account the separate cost of fittings and the different cost of different materials).

The price of any kitchen can be reduced or increased by collecting it differently.

“That won't work. You can't measure me in half. Because I'm whole."

Let's agree right away: we do not count kitchens in running meters.

If you are still curious, then from 15 to 90 thousand is equally likely.

And now - why is it so.

What is a running meter.

Linear meter in general, this is a unit of measure for long lengths (with their width, height, shape and other features; timber, for example). Corresponds to a piece of 1 meter. The cost of a running meter is the price for such a piece. From this it follows that:

The length gauge must be uniform throughout.

When cut into pieces, the length must retain its properties.

Since the price per linear meter of the product means the possibility of buying a cut desired length. For example: you can sell fabric in shoulder straps. Jeans are not.

The cost of any linear meter should be the same, regardless of the location on the long length.

And not so that at the beginning of the roll carpet is 30% more expensive than at the end.

Pipes, film for greenhouses and fences are also wonderfully measured in running meters.

What is a running meter of a kitchen.

The tradition to consider kitchens as moldings appeared in those carefree times when the furniture was ready, and all the filling of the cabinet consisted of a pair of hinges and a plywood box. The modules came out so standard that the conversion to running meters actually gave a completely objective picture of the cost.

Then the kitchens began to become more complicated, and the cost per linear meter began to stretch. Filling and installation were excluded from it, tables were simplified, made a conditional unit and a price range was introduced.

And then there were kitchens to order, focused on the fulfillment of the desires of each specific customer. Anything can get (or not get) into the composition of such kitchens; they do not at all correspond to the definition given in the first paragraph; naturally do not fall under any of the three consequences; and in the Procrustean bed of a running meter they fit a little worse than nothing. Honestly, with the same success you can count them in kilograms, it will be even more accurate.

As you may have guessed, each word in the listing affects the price. Moreover, it has a good effect: the difference in cost really happens by more than an order of magnitude.

And it will also be necessary to take into account the options for aprons, countertops, plinths and cornices.

And again about the main thing:

In order to find out the price of your kitchen, it must be discussed with you, drawn and calculated. Until all this happens, we cannot say how much it will cost you, honestly.

About how different different people are planning the same kitchen, you can read

And you can see the calculations of various cuisines and determine the price level.

Article Rating:

Liked
6

Tell your friends or save so you don't lose:

Comments:

You can furnish a kitchen for 20 thousand and a million rubles. Where does such a difference come from? What do you get for a particular amount? Let's try to highlight price categories and study each one.

Well, the topic, of course, is not for comment, but in a very in general terms let's try. Turnkey prices.
1) Category "disgusting". Facades of a chipboard, a table-top plastic, hinges China. Price — well, up to 50 thousand now. It is applied: to the country house and cheap rented apartments. From twisting and cutting by the buyer - wins. For the same amount, it is recommended to take a used kitchen - at least the quality will be.
2) Economy category. from prefabricated items. Facades film, plastic countertop, hinges - decent China. The price is 50-100. It is taken in construction hypermarkets and similar places. It does not deteriorate from hand-made modifications. Used: little money, need a kitchen.
3) Category "decent". The same economy, but to order. Film and plastic facades, plastic countertop, hinges - decent China, Poland, Italy. Price 90-150. The topics “as convenient as possible”, “as beautiful as possible” and “we will try” are already being raised here. It is better to pay for the installation, it is not recommended to deal with settings and modifications. If the model of the kitchen is designed or designers, sellers sell (draw for a specific room). Lives for 7 years, survives up to 20. Used: this is 60% of all kitchens. This also includes individual farmers without a contract from the following category (“good luck” - a cool kitchen is half the price, “failure” - took the money and dumped it, “it happens” - he is a good techie, but no designer).
4) Category "cool". Individual projects. Facades enamel, plastic, wood; countertop - fake diamond; fittings - Germans, occasionally Italians. The price is 150-500. Lives for 25 years. Tasks: beautiful + comfortable + meet the amount. There are designers among managers. closers, lifting mechanisms, carousels and other convenient bells and whistles - in strategically justified places. Do not poke around in the guts: then “returning it as it was” is expensive. Used for: for yourself - for a long time under good repair; interior designers - for clients from the following category. Before the collapse of the ruble, it was very widely in demand on credit. Here too: bring the next category for yourself from abroad. Failed attempts to buy also fall here. cheap food, for example, in Ikea.
5) Category "fancy" (if it is sold - "elite"). Price: from 600 to infinity. Facades - enamel, solid wood, rare breed veneer, stainless steel, a natural stone, glass, other unusual materials. Countertop: artificial stone, natural stone, stainless steel, all sorts of strange materials. Fittings and filling - the Germans. Electric drives and remote control opening. Filling - all sorts of new and amusing bells and whistles wherever possible, until you get bored. Tasks: to make it great (and also comfortable and beautiful, if the client does not interfere. If the client insists on “uncomfortable and ugly”, because he likes it so much, designers, as a rule, give in: they have two such kitchens, and a month is done).

The concept of "linear meter" often confuses people. Although there is nothing mysterious, and even more terrible, in this phrase. Consider several options where this concept can be applied, and learn how to calculate required amount running meters.

A running meter is the usual length in meters, but taking into account the width of any finishing or household material (carpet, linoleum, plastic or vinyl film). Let's say you have a room 4.5 meters wide and 6.0 meters long, and you are going to lay new linoleum in this room. In the store, you need to choose a material that is suitable in quality and pattern and be sure to pay attention to the width of the rolls. Linoleum width can be 1.5 meters, 2.0 meters or 2.5 meters. Since the width of the room is 4.5 meters, in order to cover it with linoleum, you will need to put a few pieces. It can be three pieces of 1.5 each (1.5m * 3 = 4.5m) or two - one with a width of 2.0 and the second - 2.5 (2.0m + 2.5m = 4.5m). At least three pieces of a smaller width, at least two of a larger one, should correspond in length to the length of the room (6 meters). This means that in order to cover a room with linoleum 1.5 meters wide, you need to buy 18 linear meters (6 * 3 = 18). If you decide to lay linoleum with a width of 2.0 and 2.5 meters, then you only need to buy 12 linear meters - 6 meters with a width of 2.0 and 6 meters with a width of 2.5 (6 + 6 = 12). In running meters, any other rolled floor coverings. But to cover the floor with carpet, it is enough to buy as many linear meters as the length of the room. Carpet is usually not joined, as is done with linoleum flooring, so you need to choose the width that completely covers the floor. By linear meters you can buy both a film for finishing greenhouses and a film for pasting any surfaces. You can calculate how much material is needed for pasting, for example, a door, in the same way as for laying linoleum. But in order to buy polyethylene for a greenhouse, you first need to draw on paper all its parts separately on a scale. Next, calculate the lengths and widths of all individual parts, and then calculate running meters. If you are going to buy ready-made kitchen furniture, it is also sold in running meters. You will only need to add up the lengths of all the walls along which the kitchen will be installed, and then only choose suitable option furniture. In the case of kitchen furniture other than standard width, the cost of a running meter will include kitchen facades, internal shelves and drawers, as well as fittings. Please note that the cost of a running meter does not include the cost of hob, ovens and dishwashers. Running meters are considered to be a variety of cornices and pipes - all those materials that require docking with each other. And in running meters, any fences, for example, metal fences, are considered.

In order not to make a mistake with the calculation of linear meters, it is better to come to the store with a drawn room plan. It should indicate the length and width of the room, and if it is a kitchen, then the height and location of windows and doors. Good luck with the calculation and repair!

At least three pieces of a smaller width, at least two of a larger one, should correspond in length to the length of the room (6 meters). This means that in order to cover a room with linoleum 1.5 meters wide, you need to buy 18 linear meters (6 * 3 = 18). If you decide to lay linoleum with a width of 2.0 and 2.5 meters, then you only need to buy 12 linear meters - 6 meters with a width of 2.0 and 6 meters with a width of 2.5 (6 + 6 = 12).

Any other rolled floor coverings are also sold in running meters. But to cover the floor with carpet, it is enough to buy as many linear meters as the length of the room. Carpet is usually not joined, as is done with linoleum flooring, so you need to choose the width that completely covers the floor.

By linear meters you can buy both a film for finishing greenhouses and a film for pasting any surfaces. You can calculate how much material is needed for pasting, for example, a door, in the same way as for laying linoleum. But in order to buy polyethylene for a greenhouse, you first need to draw on paper all its parts separately on a scale. Next, calculate the lengths and widths of all individual parts, and then calculate the running meters.

If you are going to buy ready-made kitchen furniture - it is also sold in running meters. You will only need to add up the lengths of all the walls along which the kitchen will be installed, and then only choose the appropriate furniture option. In the case of kitchen furniture, in addition to the standard width, the cost per linear meter will include kitchen facades, internal shelves and drawers, as well as fittings. Please note that the cost per linear meter does not include the cost of the hob, oven and dishwasher.

Running meters are considered to be a variety of cornices and pipes - all those materials that require docking with each other. And in running meters, any fences, for example, metal fences, are considered.

Running meter - how much? This is an analogue of the usual meter. The linear meter is used when measuring length in situations where the indication of width or height can be neglected for one reason or another.

In construction, there is such a thing as a "linear meter". For many, this measure of length remains a mystery for a long time. We hasten to reassure you, there is nothing terrible here, except for the expression itself.

Let's try to understand this concept and learn how to correctly calculate the required number of running meters.

Running meter. How much is this?

This measure of length measures what is twisted into a roll: linoleum, corrugated board, fabric, carpet. This concept is also used to measure the amount of material needed in construction or it means the amount of work to be done. For example, a running meter of a kitchen, a pipe, a plinth, a fence, a tile, a foundation, and so on.

FAQ

How many mm in a linear meter?

As already mentioned in our article, to calculate a running meter, the length of the material is required, since the width is already fixed and can be different. That is, in 1 meter 1000mm of the length of the product.

How many linear meters per ton of rebar?

Calculating the amount of reinforcement for the foundation in running meters. The measure of the amount of reinforcement is a ton. Therefore, you need to convert a linear meter into tons and even then look at the price. But how many meters of reinforcement are contained in a ton depends on its diameter: the thinner the reinforcement, the more meters in a ton.

Let's say you need lumber. In one square meter there can be a different number of linear meters for different materials(edge board, floor board, lining). This is because the quantity square meters also depends on the width of the material.

For example:

The edged board has parameters: 40x120, that is, its thickness is 40 mm, and its width is 120 mm. You need to calculate as follows:

Divide 1 square meter of edged board by 120 mm (product width), we get the value - 8.33. This is the number of linear meters.

1 sq.m. / 0.120 m = 8.33 l.m.

How much does a running meter of paint cost?

Most often, painters consider the volume of their work in square meters. That is, the length multiplied by the width of the surface.

One "linear meter" is equal to one meter?

Example - Structural Measurement

The second option for measuring the structure along the contour (outlining line) is chosen to calculate the cost of the work.

The length of the structure is measured with a tape measure.

What calculations are made in linear meters,
which ones are square?

If the amount of laminate, parquet or ceramic tiles required for flooring is calculated in square meters x, then the amount of linoleum or carpet is calculated in p / m.

The consumption of plaster, putty, primer, paint is calculated in kilograms per square meter. The consumption of wallpaper or drywall is calculated in p / m. To calculate the cost of work, calculate the cost of work per square meter.

The calculation of wallpaper for wall covering is similar to the calculation of linoleum.

Use the calculator below to calculate the dimensions window slopes, which are taken into account when calculating the cost repair work and purchase of consumables.

We are all accustomed to consider the unit of measurement of distance or length - a meter. Then what is a running meter? How is it different from the usual? Yes, basically nothing. In running meters, it is customary to measure the length of any material. At the same time, its width or height is not taken into account. They are either standard, or, when measured, they do not have a significant value.

What is measured in linear meters

In running meters, you usually measure the fabric in the store. With a width of 1.5 m, a piece of fabric 1 m by 1.5 m will be considered a linear meter. If you buy pipes, then, regardless of their thickness, the length of the pipe will be measured in linear meters. Also electrical cable. It doesn’t matter at all what its cross section is, whether it is thick or thin, the price for it is indicated per linear meter. The same situation is with skirting boards, linoleum, various heaters and seals, etc. And when the cost of a kitchen is calculated in running meters, what do you mean?

What is a running meter of a kitchen

In this context, the linear meter is used, rather, as a conditional value. For the convenience of calculations, it is considered that a running meter of a kitchen is the furniture that is installed along a wall 1 m long from floor to ceiling, according to design project. It can be tables, shelves, cabinets and other modules. Usually, the cost of the kitchen is indicated as such - per linear meter. It is so convenient to immediately calculate its approximate price by multiplying the length of the wall along which it will be located by the cost of one linear meter of the kitchen.

Each of us at least once in our lives had a chance to make repairs or purchase new furniture. And quite often when buying certain building materials we heard about such a unit of measurement as a running meter. Such a concept confuses almost everyone, and it is rather difficult to immediately determine how this value differs from a square meter. You cannot find out what a running meter is from a dictionary, because this concept was invented by manufacturers of goods. But in this material we will understand what this unit of measurement is.

This parameter represents the usual length of one meter for products with a certain width, such as fabric or linoleum. And it is much easier to calculate the cost of goods in linear meters than in square meters. For example, you need to buy a piece of carpet of a certain length with a width of 2.5 meters. In this case, it will not be very convenient to calculate square meters, because you will need to calculate the area of \u200b\u200bthe product, and then divide it into squares. In general, to carry out rather complex mathematical calculations.

With a running meter, everything is simple and in order to find out the cost of a product, you just need to multiply this unit of measurement by the length of the segment.

The linear meter is most often used to calculate the cost of such goods:

the cloth;
linoleum;
carpet;
finishing film and polyethylene for greenhouses;
electrical cable;
finished furniture;
various cornices and pipes;
railings and metal fences.

Most consumers believe that only rolled materials can be calculated in linear meters. And such an assumption cannot be considered absolutely wrong, because in most cases we are faced with this measure when buying similar products with a specific width. But running meters quite often calculate the cost of furniture.

Let's consider an example for clarity. The furniture manufacturer roughly calculated that to fill the kitchen with a length of three meters, taking into account all the cabinets, shelves, doors and fittings, it would be necessary to use materials worth 30 thousand rubles. This means that one meter of furniture will cost 10 thousand - this cost is the price per linear meter. And thanks to such simple mathematical calculations, the manufacturer can immediately indicate to the customer how much this or that set of standard sample will cost him.

But there is one caveat here, the cost of a running meter includes the price of the cheapest material and accessories, and sometimes the latter is generally not taken into account. So if you see a too tempting offer, then you should learn more specifically about the content of the goods. After all, this technique is often used only to attract new customers.

We know what this unit of measurement is from school desk. And remember that a square meter is needed to measure the area of various figures. And in fact, this measure is relevant for measuring any building materials and furniture. And if the width of the product practically does not affect the running meter, then for a square this value is of great importance. For example, you need to lay linoleum in a room with a length of 3 meters and a width of 2.5. By simple mathematical calculations, we find out that the cut is 2.5 * 3 = 7.5 square meters.

This unit measures:

area of the room;
area of flooring surfaces;
area of facing materials;
area occupied by furniture.

As for furniture, this unit of measurement is especially relevant for small kitchens, where the area of \u200b\u200bthe headset plays a very important role.

Quite often, when buying certain materials, we need to convert one unit of measure to another and vice versa. But how to do this, because a linear meter is, in fact, a unit of length, while a square meter is an area. Do not despair, because it will be much easier to do than it seems.

In order to convert a linear meter to a square meter, you will need to know the exact width of the product, which the manufacturer takes as standard. And if everything is quite simple with the calculation of linoleum or carpet - we divide one linear meter by the width of the product and get the number of square meters, then with the calculation of furniture you will have to tinker a bit.

For example, in order to find out how many "squares" are contained in a standard kitchen 5 meters long. You will need to measure the width of the floor units, not the height of the kitchen unit. Let's say it is standard 60 cm (0.6 meters). Now you need to multiply these parameters among themselves: 5 * 0.6 = 3 square meters. In this simple way, you can calculate the area occupied by the kit and measured by "squares".

For those who are interested in the question of how to convert square meters into linear meters, our experts will give an unambiguous answer. No way. Why? To understand this, you need to know the features of each of these units of measurement. And what do you do if you need to translate them? This will be discussed in this article.

"Meter" and its functions

The word "meter" is Greek origin and in translation from this language means "measure". Even in school we are given knowledge about it. First, it is the length of the path. Secondly, it corresponds to the distance traveled sunlight in vacuum in 1/299792458 seconds. This unit of measurement appeared in the 17th century, it was then that it was decided to create a generally accepted and used by all measure of distance, which is based on natural natural phenomena that do not depend on the desires of people.

So, in France in 1791 it was correlated with the length of the Parisian meridian. This was determined on the basis of geodetic and astronomical measurements, which were made by such scientists as Delambre and Méchain. According to these parameters, a standard for its measurement was also made. This sample was a ruler made of platinum, the distance between the ends of which was equal to the chosen length. But it turned out that this value is not accurate, so the meter was equated to other different values - in 1799, 1899, 1927, 1960. The last and final designation of the meter as a unit of measurement was established in 1983.

It turns out that the meter widely known and used in everyday life can be different:

square;
linear.

And how these measures of measurement differ from each other, and how to transfer them from one to another, we will find out by considering the features of each of them separately.

Features of a running meter

The phrase "linear meter" itself is incorrect, because the most common meter will be so. Such a measure of measurement is established to determine the linear length of something. That is, it would be correct to say: the linear length of something is 1 meter. This means that one unit of a linear meter is a measure of the length of something, without the influence of other units of measurement, such as width, height, mass, etc.

The designation of a running meter is most often used in the construction industry. So, in these measuring units you need to measure:

materials that are rolled up (for example, fabrics or linoleum);
hard materials (board, pipes or fittings);
furniture sets (kitchen or bedroom sets).

In this case, the width of the material is included in its cost immediately before it is recalculated by length. Consider this feature on the example of rolled material. So, a fabric in a roll corresponds to 2.2 m (this is 220 cm), which means that a linear length of one unit will have a digital width of 2.2, which corresponds to an area of 2.2 square meters.

Any length can be measured with this common measure. This procedure is performed using a regular ruler, tape measure or some other measuring tool intended for these purposes. At the same time, this unit of measurement corresponds to other measures that are also suitable for measuring the length of something:

1000 millimeters.
100 centimeters.
10 decimetres.

Most often, in household work, it is customary to use the meter, and not the units of measurement that are included in it.

Features of a square meter

Unlike linear, square footage, that is, area, directly depends on such a value as width. The international SI (system of units of measurement) clarifies this concept: a square meter corresponds to the area of a square with a side of one unit of measurement - 1 m. This measure was created specifically to measure the areas of any surfaces, it is customary to designate:

area of apartments, premises;
the amount of building materials (for example, facing or flooring);
measurement of surfaces for processing by something.

Is it possible to convert square meters to running meters (with comments and examples)

Often there is a situation when, when measuring a material, it is required to convert square meters into linear meters. But for this you need to know:

The length that corresponds to the linear unit of measurement.
Width, which is also represented by the same unit.

Consider on specific example: 12 square meters of linoleum should be laid on the kitchen floor. On sale given material measured only in running units. So you need to know the width desired linoleum, which corresponds to 2.5, 3 or 4 meters.

Experts in this particular case advise: purchase 4 m of linoleum with a width of 3 m or 3 m with a width of 4 m. This is explained by the following calculations:

the first calculation option: 4 (length) × 3 (roll width) = 12 square meters;
second calculation option: 3 (length) × 4 (roll width) = 12 square meters.

In this particular case, 12 square meters corresponds to three or four ordinary meters. But these calculations are not scientific because they are made, as they say, by eye.

Another example that will help convert the usual length of footage into squares of area.

To do this, we will make calculations with kitchen furniture: kitchen set has a length of 2.5 ordinary meters. We need to calculate the floor area that the kitchen set will take in the kitchen. To do this, we perform several mathematical operations:

We multiply the length of 2.5 m by the width of the kitchen wall 0.6 m.
We get the result - 1.5 square meters.

It is this digital indicator that will correspond to the area that it will take kitchen furniture in the kitchen.

The third example will deal with calculations related to finishing materials. To finish the bath, you need to purchase 65 square meters wooden board. IN hardware store this material is sold in 3-meter lengths with a price per linear meter. That is, it is necessary to calculate how many ordinary meters of a wooden board will be required for an area of 65 square meters. We perform mathematical operations:

We specify the dimensions of the board 300 cm × 10 cm × 0.5 cm (this corresponds to the size in meters 3 × 0.1 × 0.005).
We multiply the length by the width in the required unit of measurement (in our case, in meters).
We get the area of one board: 3 × 0.1 = 0.3 square meters.
We calculate how many boards are needed for 65 square meters, that is, we divide 65 by the area of 1 board: 65: 0.3 \u003d 216.67, or 217 boards.