How to drag an old chair with your own hands - step by step instructions with a photo. Do-it-yourself office chair upholstery: features, instructions and recommendations The right choice of fabric

Unfortunately, sooner or later any chair loses its appearance. After all, the more convenient it is, the more often it is used, and, accordingly, the upholstery of the chair wears out faster. In addition, a solid chair may not fit into the updated interior after the next repair. All these problems will be solved by reupholstering the chair with a new fabric.

Another reason to resort to is to buy an inexpensive, faceless “semi-finished product” that requires a beautiful cover or upholstery replacement to give it personality. This chair will be used as an example. The upholstery of the chair is made of linen, which is usually used for upholstering the bottoms of armchairs and the backs of sofas facing the wall. This material does not have increased wear resistance and is not treated with dirt-water-repellent impregnations, like special furniture fabrics. Therefore, it quickly loses its appearance and requires replacement.

Tools and materials:

• pliers
• furniture stapler and staples
• screwdriver
• ripper
• tailor's scissors
• safety pins
• marker
• blended fabric for interior parts
• decorative furniture fabric
• padding polyester 25 mm thick
• strong threads 45 - 70 LL (lavsan-lavsan reinforced threads commonly used in the manufacture of upholstered furniture)
• sewing machine and needle for heavy fabrics (No. 100)
• confident sewing skills

1. Take the camera and remove the chair from all sides, paying special attention to the knots - the junctions of several fabrics. These photos will come in handy when you need to assemble a new case from patterns. Don't trust your memory.
2. Unscrew the legs. Use a screwdriver to pry up the furniture staples and remove them with pliers.
3. Remove old cloth from the chair. Open the seams that interfere with this, and then use the ripper to separate the cover into parts. It is not necessary to cut the fabric with scissors, because all the details must remain exactly in the form in which they were made by the manufacturer of the chair.
4. Iron the details and sign them.
5. If it occurred to you to wash the details, and after washing they sat down significantly, then you have to do the following: take a piece of cheap fabric, use safety pins to fasten it to the chair so that it duplicates the decorative upholstery. Cut off the darts with pins and draw with a marker. After you remove the fabric from the chair, the details should be drawn on it. Add seam allowances, make sure the symmetrical pieces are really symmetrical. This method of building patterns is also used when the old upholstery is not removed, and an additional removable cover is made to update the chair.

6. Calculate how long the piece of decorative furniture fabric you need. To do this, you need to prepare a cutting plan. Lay out the parts so that they fit in a width of 1.4 meters. This is standard width special furniture fabrics. Arrange the parts so that the longitudinal thread of the canvas runs along the seat and along the backrest, and across the armrests of the chair. The sample chair does not have armrests, so only the general direction of the threads is observed in the cutting (all parts lie across the longitudinal warp thread).

7. If the fabric you choose has graphic drawing, which will need to be docked, the cutting plan must be done directly on the canvas, purchased with a decent margin. You should also take into account the direction of the pile, if you have chosen a pile material. Usually cutting is done in such a way that the pile is directed down.
8. Open the parts with a little margin in case the new cover does not fit perfectly. Baste the details with a temporary hand stitch.
9. Examine the chair. Reinforce loose knots, tighten screws and nuts. Replace the compressed synthetic winterizer. Try on the cover by temporarily securing it with a few staples where the fabric is hidden from view. If the fabric is wavy, adjust the pattern by removing excess in the seams or, conversely, adding where the fabric is too stretched. Patterns may not sit down immediately, because during operation the old upholstery, most likely, was deformed. Make as many fittings as needed to eliminate all defects. A hand needle will not leave marks, while a ripped machine stitch will leave punctures that will ruin the look of the fabric.

10. Prepare sewing machine to work with heavy fabrics according to. Check the quality of the seam on unnecessary fabric remnants. Stitch all the details. Make cuts on the allowances in those places where one piece is sewn to another along a curved line or at a right angle so that these allowances do not pull the material from the inside.

11. Put the new seat cover on. It is better to fix the fabric with staples together in order to be able to evenly stretch the cover. On the sample chair, the inner contour is first fixed, then the outer canvas is attached to the bottom. Excess fabric goes into folds that are invisible on the visible part of the back of the chair.

Then, using a stapler, the inner part of the seat is fixed.

12. In those places where the holes for the legs are located, it is necessary to make holes in the fabric and screw the legs.
13. Line the removable part of the seat (in our case, a piece of foam rubber) with synthetic winterizer and insert it into a new cover.

At first glance, reupholstering a chair may seem like a simple and enjoyable experience. This is true if you have enough sewing skills, patience and free time. For the first time, it is better to choose an office chair or simple shapes tending to a rectangle. It is better to entrust the upholstery of a magnificent chair with a complex three-dimensional structure to professionals.

Restoring the appearance of furniture that has fallen into disrepair is not at all difficult.

If the upholstery on the old chair has become unusable, you should not rush to throw it away, just drag it with a new fabric.

You can restore chairs and sofas with your own hands, saving money on buying new interior items.

In addition, hauling furniture is also a good way to earn money, with the help of which it is quite possible to replenish the family budget.

Before pulling the chair, you need to carefully inspect it. Determine which parts need to be replaced and which can still be used. As a rule, foam cushion pads, rubber straps used for screeding, and upholstery are most affected. Therefore, it is wiser to change them. It is also necessary to replace all metal parts: nails, screws and staples.

Furniture disassembly

In order to disassemble the chair, you will need the following tools:

• pliers;
• keys;
• Phillips and regular screwdrivers;
• pliers.

First of all, it is necessary to remove the back wall and the plywood bottom of the chair. They are usually secured with small nails or self-tapping screws. If the plywood is suitable for further use, then it should be removed carefully.

Remove the foam padding that sits on the bottom of the seat and gives the chair a bounce. Twist the nuts that secure the legs to the back of the furniture. If the fasteners are rusted, use special fluid to remove corrosion from metal.

Next, you need to remove old upholstery and remove the softening layer from the back. To do this, use a flathead screwdriver and pliers. Pry off the old brackets with a screwdriver so that one of the mounting legs comes out wooden surface. Then the staple is finally removed with pliers.

By prying several fasteners at once, you will avoid damaging the plywood. Pull them out one by one so as not to get scratched by the staples that have not yet been pulled out. A wound on the skin rusty metal can cause a lot of trouble. Therefore, it is best to disassemble the chair with gloves or mittens.

After removing all fasteners, the old upholstery is removed and the gasket is removed. Old foam rubber can crumble and crumble into pieces. If you are restoring furniture in an apartment, then lay it on the floor polyethylene film or newspapers. And only then remove the worn softening of the chair, otherwise small debris will scatter throughout the room.

The wooden frame of the chair is restored separately. It is necessary to remove a layer of varnish or paint from it, glue loosened elements and paint all parts of the structure.

Back to index

Backrest restoration

In order to restore the chair with your own hands, you will need a special furniture stapler and attachments to it. Ordinary office braces won't work, as they are made of softer metal and their legs are much shorter. It is best to use 6 mm and 10 mm staples. To reupholster the chair, you will need about 2 packs of fasteners of the first type and 1 pack of the second.

If the tension of the tightening tapes on the back just loosened, then they can be tightened. To do this, fastening tapes are removed from one side, the tightening element itself is pulled up, and its free end is shot with a stapler. Staples need to be driven in, changing their position in relation to each other, and not fastened exactly in a row. This technique will help to avoid delamination of plywood. It is necessary to restore the tension on all elements.

If rubber bands become rough or cracked over time, they must be completely replaced with new ones.

In the design of old chairs, the longitudinal tape is passed between the transverse ties crosswise (alternately above and below the transverse tapes). If the back of the chair is curved, then it is better to put the transverse screed on top of the transverse bands. So the load on the furniture will be distributed more efficiently, and the chair will no longer be sold.

Be sure to cut all the allowances of the tapes along the frame bar or stepping back a little from its edge. Otherwise, bumps and bumps may appear under the new upholstery, spoiling its appearance.

Back to index

Removing old upholstery

Next, you need to remove the old upholstery from rear wall armchairs. Usually its edge is glued and it is not difficult to remove the fabric. Use a flathead screwdriver to pry off the edge and pry it off the base. If the glue holds the upholstery firmly, then cut it with a clerical knife.

Old fabric can be reused. It is pulled over the back so that the new foam pad does not tear along the tightening tapes. In addition, worn upholstery will become the basis for fixing a new softener. Therefore, it should be removed very carefully.

Now the old upholstery needs to be fixed again. Align the fabric on the back frame, then place the frame on the end. The upholstery is fixed starting from the lower left corner, shooting it with a stapler. After fixing the fabric with 1 fastener, slightly pull the upholstery to the right and place another 1 staple about 1 cm from the previous one.

The fabric must be stretched so that it does not sag, but also does not form diagonal stretched folds. Small waves are allowed. You will align them when you adjust the tension of the upholstery on the second side. But large creases will be difficult to remove.

We fix the fabric and turn the frame with the opposite side towards us. We stretch the upholstery as much as possible and fix it again. Next, we fix it around the entire perimeter of the frame, constantly slightly pulling the fabric.

At the corners, we lay oncoming folds (folding the fabric in an envelope), cutting off the excess so that the upholstery does not stick out. We fasten the staples, capturing both sides of the fold with one fastener. This will prevent the fabric from spreading. Secure all 4 corners by shooting 2-3 staples.

Back to index

Preparing the furniture seat

As carefully as you did with the back, remove the fabric from the seat and remove the worn foam. Remove all nails, old screws and screws. If the fasteners are not removed, then they must be carefully drilled out. Cut off excess fabric from the attachment points, removing threads and glue residue.

With pliers, grab about 5 mm of the rubber band and pull it on, leading it over the edge of the frame and resting it on the bar. Secure the edge of the tie with a stapler. Staples must be placed, changing their position in relation to each other. Otherwise, the rubber band may break. Re-tension all bands in the same way.

As in the case of the back, we reattach the old upholstery, repeating the previous operations. If the chair foam is not too worn, it can be reused. To do this, lay the foam from the seat across the frame so that it protrudes from three sides, and from the fourth does not reach the edge of the frame by about 10 cm. The gasket is glued, the excess is cut off with a clerical knife.

Take the old foam pad from the back and glue it to the seat. Since it is 2 times thinner, then fold it in half. Don't forget to leave a fold allowance for the frame. It is wiser to glue the gasket first, and only then cut off the excess.

All joints must be securely glued so that subsequently the foam rubber does not disperse along the seam. To do this, the joints of the gaskets are smeared with glue, left for several minutes until the surface becomes viscous. And only then the parts are connected, squeezing with force. Glue the fold last, attaching the foam to the base, and cut off excess allowances.

In the same way, a new gasket is attached if you do not want to use the old foam rubber. To soften the backrest, you will need a new softener anyway. If you don't have foam desired thickness, then you can glue 2 layers of a thinner gasket together.

Lay the chair back on the softener sheet. The back of the foam is aligned with the bottom edge of the chair frame. Leave a fold allowance on top. The back is outlined with a marker, then a softener is cut out.

Glue the padding to the seat back fabric and cut the edges flush with the frame. Glue all edges carefully. Only after the adhesive has completely dried, cut off a softener strip equal to the width of the bottom bar from the lower edge of the back of the chair.

No matter how good the quality cushioned furniture, sooner or later the moment comes when you need to think about what to do next: buy a new one or restore the old one. It is not always possible to painlessly allocate an amount from the budget for the purchase of new furniture, but restoration will not cost you so much. And if you - creative person, then you will get, in addition to updated furniture, also the pleasure of the work done. Who knows, maybe your hobby will also bring you income. Let's look at how to drag a chair with your own hands step by step.

We select the material

First of all, we have to choose what kind of fabric we will upholster our chair. Upholstery material must have the following properties:

• be strong and dense;
• keep in shape;
• easy to maintain and easy to clean.

Important! It would be nice if it also had water-repellent properties.

Most often, the upholstery material is leather, nubuck, chenille, jacquard, etc.

When the fabric is selected, we proceed to the choice of pattern, color and texture. For a chair with armrests, you can use several different materials at once.

Important! The presence of a pattern on the fabric increases its consumption.

Together with the fabric, you must also purchase strong threads for working with furniture of the corresponding color.

Step 1. Dismantle the chair

The first thing you have to do is disassemble the chair into its component parts. You will need the following tools:

• a hammer;
• screwdriver;
• roulette;
• furniture stapler;
• pliers.

Disassembly of the bottom

Disassembly of the chair usually starts from the bottom. For this you need:

1. Turn the chair over and remove the legs.
2. Loosen screws or remove brackets.
3. If the chair has armrests, they must be removed - this can be done with a screwdriver and a hammer.

Important! Work better with gloves, as nails or staples can be rusty.

Bottom disassembly

To remove the fabric, you need to disassemble the bottom completely. The staples must be carefully bent, the fabric removed and the plywood bottom removed.

Important! Remove the fabric carefully, it will come in handy for making patterns for new parts.

Upholstery fabric attached to wooden frame with the help of furniture brackets, which are very difficult to remove. You can use a knife.

Important! If the staples are not damaged, they can be reused to reduce upholstery costs.

When all fasteners are removed, the entire upholstery fabric can be removed.

Filler

If the filler is worn out, you can add a new layer. Usually, batting or foam rubber is used as a filler. If it is completely damaged, then you will have to replace it completely.

Important! If you do not think over the fastening system, then over time the edges of the filler break off. To avoid this, clamps must be used. This will extend the life of the chair.

Removing old parts

All unnecessary fasteners are removed. Metal fasteners, which will be useful to us in the future, need to be treated with an anti-corrosion compound. In the same way, all the upholstery and filler are removed from the rest of the chair. In the end, we are left with a wooden frame.

It must be processed before hauling:

• remove the old layer of paint or varnish;
• glue loose parts;
• paint with a new layer of varnish or paint all wooden structures.

Important! Armrests, legs and other wooden parts also need to be stained and varnished.

Step 2. Cutting the fabric

Now you can start making new upholstery. For this:

1. We lay out the old fragments on the new fabric. If there is a drawing, you need to consider how the parts will fit together.
2. After all the details are cut out, you need to process the cut points so that they do not crumble. Or hem them with a hem method, or singe them on fire.

Important! Cutting should be done with a margin. Before you sew them together, you need to try on.

When all the details are ready, you can start assembling the chair.

Step 3. Upholstery and chair assembly

Consider the process of reupholstering the chair with your own hands step by step. You need to drag the chair in stages in disassembled form, for example, first drag the seat, then the back, then small parts.

So let's get started:

• Lay the frame of the part and place the foam rubber on it. If the foam rubber is thick and dense, then the corners can be cut off by making the transitions rounded.

Important! To protect the foam from displacement and simplify installation, you can put a layer of padding polyester on top and secure with a stapler.

• Let's move on to the upholstery. We straighten the fabric part and put it on the base. We fasten the fabric with staples, trying to proportionally stretch the fabric.

Important! The material should not sag or stretch too much - constantly monitor this process if you want the tension to be of high quality.

• In the same way we drag all the details.
• The back part can be closed with lining fabric, securing it with staples.
• When all the parts are tightened, you can start assembling.
• Remember how you disassembled the chair, and repeat all the steps in reverse order.
• All screws and fasteners must be tightened.

Every home has old furniture, and sometimes it is so loved by everyone that you simply don’t want to throw it away and replace it with a new one.

If you have an old chair and you do not want to part with it, then you can restore it.

It is not surprising that we are thinking about how to sheathe a chair with our own hands.

You can always restore your favorite chair. Many people are interested in how to sheathe an armchair with their own hands, give it a modern, fresh look, and still not part with their favorite thing.

Before you begin the restoration of the chair, check its frame for strength.

If you try, then a second life for furniture is possible. As you know, the more comfortable your furniture is, the more quickly the upholstery becomes unusable, because you use it quite intensively.

Do-it-yourself springless chairs can be made by a home craftsman like new. When starting furniture restoration, make sure that the frame has sufficient strength. If this is not the case, then the joints wooden parts needs to be glued down. When reupholstering a chair, it is necessary to replace the padding that is inside the furniture, which is usually made of batting and canvas. Thus, the new upholstery will lie better and last longer.

To update the chair experienced master everything is prepared in advance. Stock up on materials that you will need in the course of the work, so as not to be distracted in the future.

Tools and materials

1. For stuffing - batting, foam rubber, cotton wool.
2. Linen canvas.
3. Fabric upholstery for a chair.
4. Stapler, nails, scissors, hammer.
5. Tailor's chalk.
6. Centimeter.

Usually the chair has padding, which is horsehair or coconut fiber, which is covered with linen canvas. A layer of batting is required on top of the upholstery. This way you will prevent sagging. The best option in this case the thickness will be 25 mm. Non-woven fabric, a synthetic material, is also suitable; it is also sold in specialized departments of furniture stores.

Starting to close the chairs, it is necessary to follow a certain order. First of all, process the inside of the heaps of your chair. Next get busy inside backs, and after all the work done, deal directly with the base and seat. Exactly observing this sequence, the white linen tight-fitting is pulled in such a way that the batting has desired position. Finally, cover the outer sides of the chair with upholstery fabric, only without a gasket.

Back to index

Material consumption

Remove the old upholstery carefully, as it will still be useful for a new pattern.

This step is quite simple, no complicated steps are needed to calculate the material consumption, you just need to get measurements from the upholstery that you removed. In this case, it must be taken into account that over time, deformation of the tissue occurs, it is stretched. Therefore, when cutting, it does not hurt to leave additional allowances. If you have chosen a fabric with a pattern for covering, the consumption should be reviewed so that the location of the pattern is harmonious. Try to keep it all over the surface. Remember to check if the new gasket matches the old gasket material in thickness.

To this end, you will need to beat the old batting as much as possible, in this form, compare. Often, to preserve the old shape of a chair that has received a new upholstery, batting is used in a thick layer. Therefore, it is important to consider the presence additional expense. An example for such a cutting can be considered an old upholstery. But it’s better to take new measurements of the upholstery fabric, focusing on the chair.

When working with batting, be careful, as the surface of the chair can become uneven and bumpy.

The batting must be handled carefully so that the surface of the newly upholstered chair does not turn out to be bumpy. Batting should be placed on the stuffing, covered with canvas, cut out the gasket. It should have a size due to which the edges could go beyond the close-fitting.

Adjacency to the edges of the gasket of any material should be soft. If horse hair needs to be fluffed, then this is not done with a gasket made of other materials. Thanks to batting, you will not only optimally update your favorite chair, but you will also be able to adjust its appearance.

For example, when changing the thickness of the gasket, it is easy to change the proportion of the handles, make them wider and more massive, giving the chair solidity. The presence of thicker handles makes the furniture more comfortable, but do not forget that the seat will become narrower.

Back to index

Final upholstery step

Corner wrap example.

To obtain a flawless work result, it is necessary to carefully process the front corners. If they are rectangular, tuck them in with one fold, and if the corners are rounded, create a wreath of folds. special attention requires the processing of a right or sharp corner, while the ends of the fabric must be stretched at the corners directed to the outside. Next, the fabric is held and nailed. Here the distance from the corner of the frame is approximately 25 mm. A strip of loose fabric next to the nails is cut off, retreating 15 mm from the edge. Such a cut should be even, directed upwards. Excess fabric is cut off, adhering to the angle of 90 degrees.

The fabric that remains is laid in a separate fold, it must be pulled parallel to the corner of the frame, down, swept to the underside. If the seat has a rounded corner, the tension of the fabric should be such that the distribution of the free part occurs evenly on the sides. Now pull the end of the fabric optimally, and secure it under the crossbar with a stapler or a nail. Trim excess material as neatly as possible, and lay the fabric on both sides evenly folded. In this case, both wreaths formed by folds must be pulled in such a way on the underside of the crossbar so that they overlap under the chair. Nails are used to secure the edges.

You can drag the chair with any material, depending on the taste preferences of the client, interior design or financial capabilities. This can be leather, its substitute or other textile analogue.

Wrapping components

Padding office chair do-it-yourself most often occurs with the following types of materials:

Leather. It is considered the most elite and prestigious option. It should be handled carefully. The work will require additional tools which will also increase the cost of repairs.

Leatherette. Most best option on price category, but also the most short-lived. This office chair upholstery, although cheap, will last no more than 2 years, which is less than that of an inexpensive one. fabric upholstery. There are leather substitutes High Quality, which are in no way inferior to genuine leather, but their cost is almost equal.

Textile. This material has the widest range in both color scheme, as well as in the texture of the fabric. A cheap option is chenille - a fabric consisting of cotton and synthetic fibers. Further in ascending order of price: flock, jacquard, microfiber and tapestry.

Repair features

The design of the chair and its material are determined by what it is intended for. This may be the chair of the boss or management, or an ordinary employee or client. The upholstery speaks about the status of the chair. Often this is a leather version. Others have cheaper analogues or a textile surface - they are lighter in design and mobile.

When the chair is already very fond of the owner, it is not necessary to buy a new one and get used to it. Upholstery can be ordered old furniture or do it yourself if skills, materials and tools allow.

Stages of work

Do-it-yourself upholstery upholstery of an office chair is not like that difficult task as it might seem at first. It is not necessary to call the master, if there is one at hand the right tools and materials. For work, you will need the following elements: fabric for sheathing, foam rubber, scissors or a knife, screwdrivers - Phillips and flat, furniture stapler.

Before starting work, the chair must be disassembled. It is easier to do this if there is an instruction. But often there is none, so you need to deal with the device and properly disconnect the cover and seat. It is better to take a picture of the chair before the start of the analysis and at the next stages, because it will be easier to assemble it after the repair.

A simple product has standard fasteners, so do-it-yourself office chair hauling will not take much time. It is enough to unscrew the bolts and screws in certain places. When the parts of the chair are disassembled, you can begin to remove the old upholstery. To do this, use pliers, a screwdriver and an anti-stapler, if there are staples. After that, by the standards old cladding we make patterns on new material. To do this, simply attach the products to each other and circle the contour.

Next, the material should be laid on the floor in the following order: sheathing component, foam rubber and frame (back or seat). Then it is good to fasten the first one to the frame, while pulling it well - do not make folds, but carefully fix the result with a stapler. Upholstery of an office chair with leather is not only giving an updated look to furniture, but also raising the status of an organization, especially in the eyes of customers. When both parts are sheathed, you can assemble the chair back and enjoy the work done.

How about alcantara?

Material such as Alcantara is widely used in various fields. This one has a sticky layer underneath. Thanks to this, it fits perfectly on the surface. Alcantara has good term service (up to 7 years), it is not very extensible, but elastic enough to create a comfortable working environment. The best alcantara is made in Korea, it should have a 5 x 5 cm grid lined on the back.

You can drag a Chinese-made chair using the following devices: pliers, marker, centimeter tape, scissors, ruler, knife, directly alcantara with self-adhesive.

To prevent overspending of material, it is necessary to make a calculation. To do this, measure all parts of the chair. Next, add 5 cm to each side for allowances. The excess is then cut off with a clerical knife. After that, you can disassemble the chair by simply unscrewing necessary elements. Then cut off the necessary pieces of Alcantara, while marking the dimensions with a marker on the inside.

Do you remove old upholstery?

Upholstery of an office chair with Alcantara suggests the possibility of not removing the old upholstery. Alcantara - so comfortable material that fits on any surface. The protective base should be separated from the piece and attached to the workpiece, while Alcantara should be leveled so that there are no wrinkles. Wrap the excess around the edges. Later they are fixed or trimmed. At the same time, you need to cut it off immediately, otherwise it will be impossible to peel off the Alcantara in an hour.

Upholstery of the whole chair or part?

Often users are dissatisfied with only a single part of the chair, while it is possible to replace the upholstery of only the back or seat. The scope of work must be established before they begin.

Upholstery of an office chair does not have to be accompanied by an appeal to specialists. You can use the repair tips, arm yourself necessary tools and materials and make an independent restoration.

Office chair repair

Organizations often give chairs for repair. Hauling is a simple task, but when the amount of work is large, only professionals can handle it quickly and efficiently. They can come to the office or home, measure and calculate the exact cost of the work for free. Also pick up products for repair and bring back to set time. Often, the whole work takes no more than 2-3 days.

Not only the replacement of upholstery is included in the work of such firms. They can repair the chair frame itself, replace the rollers and legs, foam rubber and plywood. The cost of the service will depend on the volume and urgency of the work performed. The calculation is based on what parts were used, how much time was spent.

Price

Upholstery of office furniture is a job for a number of professionals. Now the market is replete with firms that provide such services. Often they offer the following service:

Departure of measurers to the place and drawing up estimates of work;

Chair transportation;

Dismantling the product;

Preparation of upholstery material according to sketches;

Directly banner of an office chair;

Return finished product at the expense of the firm.

Each organization has its own price list for the services provided, and prices can vary from 500 rubles and more. Not only the material matters, but also the design of the chair, its dimensions and the initial cost.

Upholstery of an office chair, the price of which depends not only on the cost of the company's services, but also on what upholstery material will be chosen by the customer, will allow you to restore the old look of the old furniture. As a rule, the catalog is provided by the company itself, it presents both Genuine Leather and its substitutes, as well as textile analogues.