How to set the time on the starline alarm remote control. How to set the time on the Starline keychain

How to set up and set the time on the StarLine A91 key fob? Detailed manual

Quite often, after replacing the batteries in the remote control, the owners do not know how to set up and set the time on the StarLine A91 key fob. Especially for the owners of such devices, we will briefly talk about this so that many who encounter such a problem can independently set the current time on the display. It is important to perform such an operation correctly, as many owners use the services of a timer to start the motor.

Set up and set the time on the StarLine A91 key fob It is possible for any driver, regardless of the length of time spent behind the wheel of a car. The development of this model of security car alarm fully meets the requirements of car owners to ensure their safety. Therefore, the key to ensuring the correct and long-term use of such a system will be to study the instructions for its operation.

A few words about the security system

These developments of security systems are among the most modern and reliable 12 Volt devices that have dialog authorization, encryption keys are individual for each product, have such a function as remote start at the set time on the control panel timer or engine temperature. The performance is maintained even in conditions of strong radio interference in the city.

The use of interactive authorization made it possible to exclude the possibility of intelligent electronic hacking, provides high resistance to all currently known code grabbers. This became possible after the use of conversational encoding algorithms, and individual encryption keys are used, as well as a new, previously unused frequency hopping method.

This encryption method is used for both remote controls, both for the main key fob and for the additional one. The existing system fits well with machines that also have such a button. The device has good resistance to changes in outdoor temperatures. High performance is maintained at temperatures from minus 45 degrees to plus 85 degrees.

Benefits of using it

- The product has a high resistance to hacking attempts, thanks to the use of new encryption methods;

- The presence of the "Megapolis" mode allows the use of products in places with big amount radio interference;

- You can use multiple different ways remote start of the motor;

- All inscriptions and pictograms are made in Russian;

The use of modern software developments has made it possible to achieve an increase in the speed of the devices by about 20% compared to other models of similar devices.

On the Starline alarm key fob, not only useful system information is displayed, but also the time that is manually set.

Most car alarm key fobs that have a screen can also display the time. Not only is this practical in terms of being in control of your schedule and being aware of your time, but it's also handy for implementing additional auto-launch capabilities. Starline does not lag behind its competitors and also uses the clock function in its arsenal. Setting them up is not difficult, you need to know the main principles of controlling the alarm key fob.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

Even though Starline has simplified the time setting procedure to the maximum, some issues related to failed installation attempts continue to arise.

Possible Causes of Failed Time Settings

If you find that the time is no longer displayed correctly on your Starline keychain, then you should check the battery condition. It is quite easy to do this, thanks to the built-in battery indicator function. If the battery loses the energy necessary for high-quality operation, the corresponding picture appears on the display, accompanied by a sound signal. And although this reason is extremely rare, especially for Starline, check any possible options necessary.

The second reason could be a battery change. After installing a new battery, the time is automatically reset.

Be careful, replacing the battery inevitably entails resetting the anti-hacking protection, so the first thing to do is not to set a new indicator, but to put the car on the Starline alarm.

Another reason is incorrectly adjusted clock values or an incorrect set-up procedure.

Debugg

Regardless of the conditions that caused the failure or reset, you will have to restore the clock. You can do this in two ways:

Classic. The time is set by service commands on the alarm key fob;
Radical. Replace the battery at zero hours zero minutes. The time values will be reset to zero, the countdown will start from the given point.

Setting new indicators on the Starline alarm display has general principles for most models. They are performed using a specific algorithm of actions, which can be conditionally divided into three types, depending on the generation of the Starline alarm and some of its features.

Making settings for E, D, B series

Car alarms Starline markings , D and allow you to set the time period by performing the following actions:

Press the fourth button on the control panel and hold it until the countdown of three signals - one long and two short. After that, 4 menu functions will appear on the screen. Select the desired one by pressing the fourth key again. You can set the date and time using the first function. It is designated as F-1. After that, hold down the fourth button again, wait for two signals and start setting the time using the first two service keys.

Making settings for the A series

Setting the necessary parameters on the Starline A series alarm depends on the model number.

And it provides for the presence of four service keys, which determines the features of the commands produced.

It is possible to set the time parameters on these devices by long pressing the fourth key. After three consecutive beeps, the hour digits will flash and the values can be changed using the second and third keys. To set the minutes, press the fourth button again and repeat the above steps.

And they have a simplified look and are content with the presence of three service buttons.

To carry out this procedure on the key fobs of these models, you will need to press and hold the third button with the image of an asterisk for up to three characteristic signals. After that, you can adjust the hours and minutes. The keys to open and close the lock allow you to decrease or increase the numbers, and the asterisk button to move between hours and minutes.

What happens if you don't set up

The least that can happen in this case is that you lose additional information. More - such autorun parameters as starting on an alarm clock, at a specified interval or on a timer will be lost for models a91 and b9.

The consequences of this can be a cold engine and increased collection time, failure of the starter due to high loads during a standard start in the cold season, as well as the need to replace the battery during long periods of non-use. vehicle at low temperatures.

The StarLine A91 security system belongs to the class of budget alarms. Despite this fact, it provides all the necessary functions to protect the car, and the anti-theft complex itself meets all applicable requirements. The data stream, in Starline A91, passes through eight changing channels with a 128-bit encryption code.

In addition, the system provides the option of intelligent engine start. Thanks to such features, intercept the signal security system extremely difficult, because the alarm system independently selects the frequency for communication between the key fob and the main unit in the car. Such a feature, in the conditions of the city and advanced level radio interference, plays a key role.

How to start the engine from the remote

As noted above, the StarLine A91 alarm has a remote engine start function. But before setting up autorun, follow a few steps:

Move the gear knob to neutral (disengage all gears).
Turn the key in the ignition and remove it. The engine must be off.
Apply the handbrake.
Close all doors, trunk lid and hood well.

In order to successfully configure autorun, it is important to strictly follow the above algorithm. Otherwise, remote start will fail. If the car is properly prepared (the engine is turned off by the Starline A91 alarm), it can be started from the key fob in various ways:

Press and hold, for three seconds, the 1st button. As soon as you hear a beep, press the 3rd key.
Set up periodic engine start from the remote control.

This option is especially relevant in winter, when it is necessary, from time to time, to warm up the engine. The StarLine A91 control panel is capable, in automatic mode, of starting the engine and ensuring its warm-up, with the required frequency - once every two, three, four hours or once a day.

Setting automatic start by temperature and time

A feature of the Starline A91 Dialog security system is the convenience of autorun settings. The latter can be adjusted in such a way that the function will start the engine when the temperature drops to a certain level, or at a specific time period.

Enabling autostart by temperature

To configure autostart by temperature, consider some conditions for the correct operation of this option - the installation location, the presence of a temperature sensor, and also its serviceability. To activate the function, follow a series of steps:

For a long time, press the 3rd key (with an asterisk symbol).
Wait for the sound signal from the remote control (the sound should be one-time).
Look at the display - the icon located on the left side, at the bottom of the display, will flash on it.
Briefly press the 3rd button, then move through the menu to the thermometer icon (third from the left).

Once you are sure that the desired function is set on the alarm, press the 1st button to activate the mode. If you want to turn it off, press the 2nd key on the key fob body. Now look at the display - in place of the clock, the motor temperature parameter should appear, at which the autostart will work.

After the temperature is displayed, you do not need to do anything - after 8-10 seconds, the Starline A91 key fob will give a signal, and a clock will appear on the screen. At the same time, the 3rd icon with a thermometer remains dimmed. By appearance image, you can control the correctness of the autostart setting by temperature. If the icon is light, the function is disabled, and if it is dark, the option is enabled.

Configuring autorun by time

To enable this option on the StarLine A91 alarm, select the 2nd icon on the display. At the same time, the headlights of the car should blink once, and the key fob of the security system should give a signal in the form of a melody. This completes the autorun time setting. The system will independently give a command to start the engine at a certain time.

If the car does not start on the first attempt, a second one is made. In this case, the starter operating time is automatically extended by 0.2 seconds. The timer of the device contains four attempts to start the motor. If all of them are used up, but the engine still does not start, an audible signal will sound on the Starline A91 remote control.

To configure autostart by time, do the following steps:

If the considered manipulations are done correctly, then the autorun setting is completed. Now the StarLine A91 alarm will give a command to start the engine at a certain interval.

Disabling the option is performed according to a similar algorithm. The only thing is that the confirmation of the choice is made using the 2nd button, which shows open lock. If the start of the engine was successful, then an icon appears on the display with the image of the exhaust gases. At the same time, the car's headlights should blink three times, and the horn signal is given three times.

Why autorun does not work - the main reasons

During the operation of the machine, situations are possible when the Starline A91 autorun does not work from the key fob. The reason for this phenomenon, as a rule, is not associated with the failure of one of the parts, but with errors in operation or configuration. In the event of malfunctions in the automatic start, problems may arise with the configuration of the vehicle software.

The main signs of failure include:

The car doors cannot be closed with the key fob. Here it is better to contact the masters at the service station. To eliminate the malfunction, it is required to check and calculate the place of the break, in the chain between the main unit and the door, the compliance of the actuator wires with the declared technical requirements, as well as the correct setting of the impulse to close the doors.
Commands from the StarLine A91 key fob do not find a response from the main unit installed in the car. Such a malfunction, as a rule, can be explained by a low battery or sticky control keys. The solution to the problem is the complete replacement of the remote control and its registration in the alarm system.
The shock sensor is not working. Here right decision is its reconfiguration.
Starline A91 autorun is not activated. A common cause is a broken wiring that can be damaged. In addition, an incorrectly installed immobilizer crawler (most often antennas) may be the cause of the breakdown. Also check that the autorun settings are correct.
The alarm is activated excessively often. There are two possible reasons for this - the oversensitivity of the sensor or the appearance of rust on the limit switches.
The car siren is not working. There may be several reasons - the siren itself has failed, or the wiring of the machine is damaged. To eliminate the breakdown, it may be necessary to replace the signal source or repair the vehicle wiring.

Video: Setting up Starline A91 autostart, by temperature (by timer, by alarm clock)

Setting the clock, timer and alarm clock of the Starline car alarm is necessary for precise activation time functions. For example, to use remote automatic engine start. You can do it yourself using the user manual.

[ Hide ]

Instructions for setting the time

The procedure for setting the time on the Starline key fob may differ depending on the alarm model.

How to put and set the time on the remote:

Take the pager and hold down the key under the third number, it is used to adjust the clock settings of the security system. Hold down the key until the key fob speaker emits one melodic pulse. After that, another short beep will sound, and then two more short melodies will sound. This indicates a successful entry into the clock programming mode. On the key fob "signaling" the indicator with the clock will blink. With the key under the first number, the hour values are increased, and with the second button, this parameter can be decreased.
Then briefly press the third key to set the minutes. This will cause the minute indicator to flash on the display. Key 1 increases the minutes, and the second button decreases them.
After that, click on the 3 key, this will cause the pager to enter the alarm parameter activation mode. When the corresponding indicator starts blinking, the first key will increase the readings, and the button number two will decrease them.
Click the key again to set the alarm minutes. Similarly, the procedure for increasing and decreasing parameters is performed.
With the subsequent short-term click on the key 3, you can activate or deactivate the alarm clock. Button 1 of the “signal” turns on the function, and the key number 2 turns it off.
If you continue to press the key number 3, the menu for setting the alarm timer will open. When the option indicator starts flashing, the first and second keys decrease or increase the parameters. With the subsequent short-term click on the third key, the minutes indicator will flash. Adjustment of value is made by similar buttons. After setting, pressing the key number 3 will activate or deactivate the option.
To leave the clock setting mode, you just need to not touch the buttons on the pager for five seconds.

Irina Belousova showed how to independently set the time on the Starline pager.

How to set the time on the key fob, E91, B94:

To enter the settings menu, you need to click and hold down the key number 4. The button is held until the pager of the security system emits one long, and then two short beeps.
After that, you will hear another long and two short beeps. On the pager screen, you can see the indication of the first option. With the help of the first and fourth keys, the required function is selected. F1 is used to adjust the time and date settings.
After selecting an option, click on the fourth button and hold it down until two short beeps sound.
Specify an adjustment option. The pager allows you to set not only the minutes and hours, but also the day, month and year. For selection desired value click on the fourth or first key.
Once a parameter has been selected, the values are adjusted by using the second and third buttons.
When all values are set, you must exit the setup mode. The alarm will automatically leave it if you do not click on the pager buttons for eight seconds. You can exit the settings menu by holding the first button on the transmitter. Exiting the mode will be signaled by two short beeps from the pager.

Causes of settings failure

If the control device shows the wrong time, then first of all it is necessary to diagnose the battery condition in the pager. All remote controls of modern Starline security systems are equipped with the option of indicating the battery charge. When the battery loses its capacity and cannot perform main function, the discharge indicator will be displayed on the screen. In addition to the icon on the display, the remote control will emit a characteristic melodic signal.

The cause of the failure may be the replacement of the battery. When a new battery is installed in the pager, it will reset the time automatically. Please note that changing the power supply will reset the anti-tamper alarm settings. After you change the battery, you need to activate the security mode. Only then is it possible to set time indicators. The problem of settings failure may be due to the fact that the car owner made mistakes during the adjustment.

Andrey Sharshukov showed how the time values are adjusted on the key fob from the Starline A93 complex.

Trouble-shooting

To fix the problem, it is necessary to diagnose the key fob and, if necessary, change the power sources. If the malfunction consisted in the failure of the pager itself, then the device must be repaired or replaced.

After eliminating the cause of the malfunction in the Starline key fob, you will have to re-adjust the clock readings.

There are two options:

Traditional. Setting the time parameters is carried out according to the instructions described above.
Radical. The power supply in the pager is replaced at 00-00. All time parameters will automatically reset to zero, and the time will start counting from the set point.

What happens if you don't set the clock?

The ICE remote start options may fail. The power unit of the machine will not be able to start on time by an alarm clock, after a certain time interval, or by a timer. After implementing the remote start option, the power unit will remain unheated, which, due to increased loads, can lead to damage to the starter device.

Liberal legislation aimed at protecting the rights of car thieves does not allow the car owner to use such effective means in the fight against this evil, like bear traps, electricity and explosives.

Therefore, every motorist cannot do without installing electronic security on their movable property. There are a huge number of models of such devices, for correct operation which require not only professional installation, but also the correct setting during the operation of the vehicle.

All radio technical parameters of the device are clearly fixed in the process of manufacturing the alarm control elements and cannot be changed, but such user settings as precise time setting must be set correctly.

How to set the time on the Starline A91 keychain will be described in detail in the article, but first you need to figure out why it is necessary to carry out such actions.

Why you need to set the time on the keychain

A modern car is not a luxury, but a means of transportation that can be controlled from a distance. Setting the Starline keychain time is necessary, first of all, in order to correctly set the moment for automatic engine start.

Despite the fact that there is no need to warm up the engine to start moving, due to the presence of minimal thermal gaps in the engine of modern cars, in winter time such a feature would be very useful. To pre-program the car for certain actions, you will need to perform a simple setup of the alarm pager.

Time setting: step by step instructions

In order for the time setting on the Starline A91 key fob to be carried out correctly, you must step by step follow the following instructions:

1. The button at number 3 (an asterisk is drawn) is held until 3 beeps sound. After carrying out the actions described above, the icon with the clock will start flashing. Now you can set the time with buttons 1 and 2. With button 1 the number of hours increases, and with button 2 the time value decreases accordingly.

2. After setting the hours, briefly press button 3 and set the minutes. Similar to adjusting hours, minutes are set by pressing buttons 1 and 2.

3. At the next stage, the alarm clock is adjusted. For this purpose, button 3 is briefly pressed. After the icon starts flashing, the readings of this mode are also set by pressing buttons 1 and 2.

As you can see, there is nothing complicated in adjusting the time on the Starline A91 key fob, but when making the settings, you should be very careful not to confuse the modes. Flashing the corresponding icon on the display helps to carry out correct setting keychain.

Causes of frequent knocking down alarm settings

If the time adjustment has to be carried out quite often, then it is necessary to determine the cause of the unstable operation of the electronic system. The most common reasons for knocking down temporary settings on the Starline A91 keychain:

Weak battery.
Lack of reliable contact between the battery and the terminals of the device.
Factory defect or malfunction of the device software.

In the first case, the problem of frequently changing the time settings is solved by replacing the battery. To carry out this operation, it is enough to disassemble the key fob, remove the dead battery and install new element nutrition.

A new battery must be completely identical to the element being replaced in size and current ratings. If it is possible to purchase a more expensive battery, then this must be done. When using a high-quality battery, the frequency of replacement will decrease significantly.

If the unstable operation of the key fob is caused by bending or destruction of contacts, then this problem can also be solved. on your own. In the first case, it is enough to straighten the elastic contacts in order to increase their pressure on the contact part of the battery. If the contact is broken, then this part can be soldered using a low-power soldering iron with a thin tip.

A key fob malfunction caused by a factory defect must be repaired at the expense of the manufacturer. If the performance of the device is impaired due to the fault of the motorist, then the repair or replacement of the device is carried out at his own expense.

In the event of malfunctions that cannot be eliminated with your own hands, you should contact specialized workshops, where professionals will establish the exact cause of the device’s inoperability and perform quality repair or replacement of the Starline A91 car alarm key fob.

P.S. How to set the time on the Starline A91 keychain is described in the article. If a high-quality battery is installed in the device, then this procedure will rarely be required. Over time, the sequence of actions is forgotten, so it is recommended to bookmark this article in your browser for quick search if necessary.