How to descale a transparent electric kettle. How to clean a glass electric kettle from scale

The electric kettle has long been an indispensable item in the kitchen. But over time, scale forms in it, which occurs regardless of the quality of equipment, frequency of use and other objective factors. Plaque disrupts the operation of the device and provokes the appearance bad smell water. To avoid such negative phenomena, spend regular cleaning household appliances using chemical means or home methods. How and how to effectively clean Electric kettle from scale at home?

To clean the electric kettle from scale, follow these simple recommendations:

• Warn all family members that the kettle is being cleaned and that water cannot be drunk from it. If possible, carry out the procedure when no one is at home.
• To clean the device, pour water into it, add the active substance and boil. Unplug the kettle from the mains and rinse well.
• Do not use abrasive powders or metal brushes for cleaning. They may damage the kettle.
• Do not allow a large accumulation of scale - for this, clean the electric kettle at least 1-2 times a month. For the purpose of prevention, use settled or filtered water.
• For removing heavy pollution apply several methods in combination.
• Using household chemicals for cleaning, do not forget to thoroughly wash the appliance to harmful substances did not enter the body.

Citric acid and juice

To clean the kettle, prepare a solution based on 500 ml of water and 1 tbsp. l. citric acid. Pour the resulting mixture into the device and boil. After turning off the kettle, leave it for 15-25 minutes to dissolve old dirt. After the allotted time, rinse the kettle with a soft sponge and clean water.

In a similar way, you can clean the device with a lemon. Add a few slices of fresh citrus to a kettle of water, boil it and wash it. This method will not only get rid of scale, but also give a refreshing lemon aroma.

Baking soda

Soda will help to effectively get rid of scale. Pour 1 liter of water into the electric kettle and add 3-4 tbsp. l. soda. Bring the solution to a boil, let it cool slightly, and then rinse the appliance with clean water.

To get rid of old stains, boil a kettle of baking soda, then pour out the solution and pour in the vinegar. The reaction of alkali and acid will speed up the process of destroying scale and help you quickly get rid of it.

Vinegar and essence

To clean the electric kettle at home, pour water (1.5-2 l) into it and add 100 ml of 6% vinegar or 1-2 tbsp. l. essences. Turn on the kettle, wait for it to boil and leave it for 3-4 hours (with a large amount of scale - overnight). During this time, the vinegar will dissolve the plaque. Then pour out the vinegar solution and rinse the kettle thoroughly with a clean running water. The disadvantage of this method is the unpleasant smell of vinegar, which can be eliminated by prolonged ventilation.

Lemonade

It may seem strange to you, but scale can be overcome with the help of carbonated drinks. It is important that the lemonade is colorless, otherwise some elements of the device will be stained.

To remove scale, shake the soda and pour 1 liter into the kettle. Bring the lemonade to a boil and leave to cool completely. The scale will completely dissolve and be removed due to the phosphoric acid contained in the drink. If the contamination is not strong, simply pour the soda into the kettle and leave for several hours (without boiling), and then rinse with a soft sponge and clean water.

Oxalic acid

Will be able to cope with scale oxalic acid. Pour in not a large number of funds in a kettle and fill with water. Boil the solution and leave it for a few minutes, then remove the remaining scale with a soft sponge. You can also use fresh sorrel for cleaning, but due to the low concentration of acid in it, you will need to repeat the procedure.

Household chemicals

Household chemicals will help get rid of scale in an electric kettle. The range of funds will allow you to choose the most suitable option, which will effectively remove plaque. The most popular remedies are Antinakipin, Descaler, Major Domus.

Before use, carefully read the instructions and follow all the steps with strict adherence to the dosage and recommendations. After treating the kettle with household chemicals, rinse it well, and to remove residues chemicals, boil in it clean water at least 3-4 times.

"Cleanliness is the key to health." This catchphrase from the Soviet cartoon "The Tale of the White Ice" has not lost its vitality in our time. Hygiene dictates the rules of health protection to us, including in the kitchen. The main appliance in the place of cooking - the kettle - pollutes scale, rust and soot. How to quickly and effectively clean an electric kettle at home, you will learn from our article.

What is scale and why is it dangerous

Part drinking water salts are always included, this is its benefit for living organisms. Water without salts is called distilled, it is sold in auto shops and pharmacies. But we do not recommend anyone to drink "ideal" water.

Scale is a solid deposit that appears over time inside the kettle, on the bottom or on the heating element. Deposits are water-insoluble salts of calcium and magnesium. The content of these salts determines the hardness of water - the harder the water, the more salts it contains. Partially, the hardness of water is reduced by filtration, but it is still impossible to completely eliminate the formation of scale.

Scale is a poor conductor of heat, so heating element in a salt “case” it heats water longer, it does not cool enough and overheats. In the worst case, it will burn out.

If you do not follow the kettle, over time it will be covered with a salt "cover"

Another trouble is that insoluble salts from the kettle get into the cup. Thin flakes nasty crunch on the teeth and spoil the pleasure of tea drinking. Swallowing them is dangerous for the kidneys and the excretory system of the body.

Proven ways to remove scale at home

The first thing that comes to mind is to scrape the scale with a hard object - a knife, fork or a metal brush. Such mechanical way we categorically do not recommend cleaning - ruin the kettle in no time. All the methods described below are chemical, based on the interaction of scale with acids and the formation of soluble precipitates.

The main helpers in the kitchen are soda, vinegar and citric acid

Vinegar

The most extreme way. With the help of acetic acid, deposits are removed in industrial boilers and pipes. In our case, it is suitable for caring for metal teapots with a thick layer of old scale.

Procedure:

1. We take acetic acid, dilute it in a ratio of 1:10, and pour it into the kettle. The reaction starts immediately, the liquid hisses and bubbles.
2. We turn on the kettle and heat it up to about 60 degrees, the process is accelerated.
3. We observe and see that soon the reaction stops - the water calms down and becomes transparent. Let the kettle stand for five minutes, pour out the solution and rinse the flask thoroughly.
4. Then pour clean water into the kettle and bring to a boil to wash off the remaining vinegar.

You may have to repeat the procedure to get rid of the specific smell.

Attention! The method is not suitable for plastic teapots, acetic acid is too caustic. When boiling the solution in the kitchen, it smells strongly of vinegar: ventilate the room during and after the procedure.

Video instruction: cleaning an electric kettle with vinegar

Lemon acid

Citric acid is not as aggressive as acetic acid. Handles light to medium sludge. The method is suitable for kettles with metal, plastic or glass flasks.

Procedure:

1. Pour half a liter of water into the kettle, turn it on and wait for it to boil.
2. Take 1-2 tablespoons of citric acid and fall asleep in hot water.
3. Turn off the device and wait until the solution cools down.
4. Pour out the waste water, fill it with clean water from the tap, bring it to a boil again.

Note to the owner. Instead of citric acid in powder, you can use lemon - the fruit contains a large amount of this substance. It is enough to cut one lemon with a peel into a teapot and boil it for ten minutes. Bonus - lemon flavor throughout the kitchen.

Video instruction: how to get rid of scale with citric acid

Baking soda

Crystalline sodium bicarbonate powder also helps in the fight against scale. It is a weak alkali, the scale does not dissolve, but only makes loose.

Procedure:

1. Pour half a liter of water into the kettle and bring to a boil.
2. Take 1 tablespoon of baking soda, pour into boiling water and let cool. During this time, the scale will become softer, it will not be difficult to wash it.

In the spouts of many electric kettles, a mesh is installed so that scale particles do not fall into the cup. When caring for the kettle, do not forget to rinse the filter.

soda ash

Unlike food, soda ash has a strong alkaline reaction. This chemical is used for cleaning tiles, washing and boiling clothes, softening water in washing machines.

Procedure:

1. First we prepare the solution. To do this, take 1 tablespoon of soda ash and knead in a small amount of water.
2. Pour 1 liter of water into the kettle, bring to a boil.
3. Pour the prepared soda ash solution into the kettle, and then leave the kettle to cool.
4. After cooling, remove the scale with a sponge. Do not forget to thoroughly rinse the kettle.
5. The first boil after the procedure should be "empty", the water is drained into the sink.

Attention! Soda ash is caustic. When handling it, be careful, do not touch it with your hands, use gloves, avoid contact with eyes.

Special funds

Special descaling products are available - tablets, liquids and powders. The composition of the preparations includes organic acids that dissolve scale (sulfamic, adipic, citric and others). Read the instructions for your device carefully. Follow the dosage strictly. Follow the process so as not to spoil the device. If the teapot flask begins to change color, stop the procedure and rinse the container with water several times in a row.

The special agent Antinakipin combines all the necessary properties

Attention! Use such products with caution. They contain harmful chemicals. Thoroughly rinse the kettle after cleaning, repeat the cycle of boiling and draining the water several times before use to wash away the remnants of the “chemistry”.

soda + vinegar

If you have a neglected kettle covered with a thick layer of scale, a combination of baking soda and vinegar will help bring it back to life.

Procedure:

Fill the kettle up to the top mark.

1. Pour soda into it at the rate of 1 tablespoon per 1 liter of water.
2. Bring the kettle to a boil.
3. Drain the water, fill the kettle again with water, add a tablespoon of acetic acid and bring to a boil again.
4. Due to the reaction between alkali and acid, carbon dioxide is released, which loosens the sediment. Cleaning the kettle will be easier.

Attention! Remember to ventilate the room while boiling the vinegar. Rinse the kettle thoroughly after the procedure several times.

Folk remedies

Coca Cola

The active ingredient in this drink is phosphoric acid, a moderately strong inorganic acid. This property of Coca-Cola is used on the farm to remove scale. Note that the method, although handy, is not very cheap - soda or citric acid cost less than bottles of soda.

Attention! The drink may stain the plastic case.

Procedure:

1. We open a bottle with a drink and set it to stand for several hours so that the gases come out.
2. Pour Coca-Cola into the kettle to half, bring to a boil and leave for 10-15 minutes.
3. Drain the infusion and rinse the kettle.

Video: is it possible to remove scale with Coca-Cola?

Attention! If gases are not released from the bottle, the expanding bubbles will displace the liquid during boiling. “Cleaned” will be not only the kettle, but also the table under it, and the stove next to it, and the floor in the kitchen.

Brine

Procedure:

1. Fill the teapot with brine.
2. Bring to a boil and wait until it cools down.
3. Drain the liquid, rinse the kettle.
4. The first boiled water is also poured into the sink.

Potato peelings

Another home method helps keep the kettle clean by removing a thin layer of scale. it potato peelings.

Procedure:

1. We wash the potato peel, put it in a kettle, pour water and boil.
2. Cool for two hours and pour out the contents.
3. We wash the flask, wipe it with a soft sponge.

Removing soot from the walls of the kettle

Carbon deposits form when food is burned at high temperatures. It is hard to imagine how this can be in an electric kettle. However, in student hostels and that doesn't happen. Nagar emits an unpleasant odor and releases carcinogens. You can remove it in several ways.

wet salt

A small burnt place is wiped with wet salt. A more active remedy is a solution of salt in vinegar, the proportion of 1 teaspoon of salt to 1 tablespoon of vinegar. Gently apply the mixture to the sponge and wipe.

Activated carbon

An aluminum kettle is saved from soot with activated carbon. Crush a dozen pills activated carbon, moisten with water, apply to the surface and leave for an hour. Then wipe off the dirt and rinse with running water.

How to remove rust?

Rust out glandular water bites into steel and plastic

• Coca Cola. We defend the drink so that the gases come out, pour it into the kettle, boil, after a while drain and rinse, wipe off the rust with a soft sponge.
• Pickled cucumber pickle. Fill the kettle with brine, heat to a boil. Cool, drain the brine, rinse the flask, wipe the rust with a sponge.
• Washing powder plus potatoes. Moisten the surface, pour on rust stain washing powder, we wait 20 minutes. We cut the potato, wipe the wall of the teapot with the cut on top of the powder. We rinse the kettle well with running water - detergents are poorly washed off, so we repeat several times.

Eliminate the unpleasant smell of a new kettle

Plastic, steel, glass - regardless of the material, the new kettle will smell. Factory, box, warehouse, plastic or metal. The manufacturer knows about this: the preparation of the device for operation is written in the instructions.

We recommend smelling your purchase while still in the store: you should refuse to purchase if you do not like the smell. Poor-quality material comes across even from well-known companies, not to mention the crafts of Uncle Liao.

A good kettle is enough to pour, boil and drain the water into the sink (repeat if the factory recommends). If the result does not suit you, here are some more tips.

• Baking soda. Pour water into the kettle. Add 3 tablespoons of soda to it, bring to a boil, leave to cool. Drain the water, rinse under the tap. The smell should be gone.
• Lemon acid. Boil water in a kettle, add citric acid to it. If there is no powder on hand, it will do. lemon juice. We leave it overnight, warm it up again in the morning and drain the infusion. Rinse with clean water.
• Sugar. The method is suitable for steel kettles, eliminates the specific smell of steel. Pour water, bring to a boil. We throw two or three pieces of refined sugar into boiling water. We wait half an hour, drain the sweet syrup and rinse the flask. Fill the kettle again with clean water, boil and drain the water.

If the smell of plastic from the kettle does not disappear, we recommend that you return the product to the store. Bad-smelling plastic probably contains hazardous substances.

How to prevent the formation of scale, soot and rust

We reduce scale

It is impossible to completely get rid of scale. Ideal water that does not contain salts is unhealthy. The following methods reduce the formation of scale and facilitate its removal.

soft water

Pay attention to the water you take from the tap. If it is too hard, it is better to pass it through a filter. You can buy softer water for tea drinking, which is sold in bottles. If this is not possible, let the water stand for at least a day.

Bottled water manufacturers indicate the hardness on the label. Water hardness is measured as the amount of magnesium and calcium salts per unit volume, the unit used in Russia is milligram equivalents per liter (mg-eq / l).

Here is a table for assessing the hardness of water. Soft to moderately hard water is suitable for a kettle.

Comparative assessment of water hardness (table)

Fresh water

After drinking tea, drain the water, do not leave it overnight in the kettle, the salts fall out slowly. Always use fresh water in the morning. Rinse the kettle regularly from the precipitated sediment, wipe it until the layer has become thick.

Taking care of the electric kettle

At least once a month, use the methods proposed in our article, for example, the repeatedly proven option - boiling with citric acid.

Rust Prevention

chipped enamel

If on the inner or outer surface enamel teapot chipped, it is better to replace it. The metal from which this kettle is made is not intended for contact with food, chemical compounds from metal get into the water and harm your health.

Poor quality water

If rust gets into the kettle from the water, you should deal with the source. The reason may be old pipes, an incorrectly selected aquifer of the well, and terrain features. We recommend filtering the water or taking it elsewhere.

Scale is formed from useful salts contained in water, so it is impossible to completely eliminate precipitation in the kettle. But growing stalagmites on a heating element is not good either - ruin both the device and your health. If you want the kettle to serve you long years, take care of it regularly.

Scale is formed due to the content of metal salts in tap water settling on the bottom and inner walls of ordinary kettles or electric heating element.

The use of tea or coffee, generously seasoned with mineral deposits, threatens with diseases of the kidneys, joints and bones.

A dense layer of scale leads to a long heating of water, and in electric kettles - to breakage of the heating coil.

The rate of plaque formation depends on the hardness of the water, but even filtration will not eliminate the need to periodically descale the kettle.

How to descale the kettle: the necessary tools

To rid the kettle of scale and extend its service life, you can use both special preparations from the household chemicals store and home remedies:

• citric acid or lemons;

  sweet soda;

  pickle from canned cucumbers or tomatoes;

  peel of apples, pears or potatoes.

Soda softens limescale, and the rest of the products contain acids that scale is afraid of. For cleaning, you will also need a soft brush, sponge or brush. Do not use to speed up the process metal washcloths that damage dishes.

How to descale the kettle: method 1 - traditional

The easiest way to remove scale from the kettle is with the help of improvised means that are in every kitchen: citric or acetic acid, soda, or a combination of both.

Vinegar cleaning

Manufacturers do not recommend cleaning electric, enameled and aluminum kettles with vinegar; the product is suitable for stainless steel dishes with old deposits.

With a small layer of lime, fill 2/3 of the kettle with water, and the remaining 1/3 with 9% vinegar. Bring the solution to a boil over low heat, remove the kettle from the heat and set it aside for 1-3 hours to loosen the scale. If the bottom and walls of the dishes are covered with a thick and dense crust of deposits, prepare a solution at the rate of ½ cup of vinegar per 1 liter of water, pour it into the kettle, put it on a small fire, wait for it to boil and boil for another 10-30 minutes - depending on the volume of the vessel.

After cooling, thoroughly rinse the kettle with a soft sponge, removing any remaining scale, boil it 1-2 times with clean water and rinse the container to get rid of traces of vinegar.

Cleansing with citric acid

A gentle tool will help get rid of scale on any kettle. To remove dense layers of lime, boil the kettle with an acid solution (10-15 g of 1 liter of water), turn it off immediately after boiling and cool it for 30-60 minutes - during this time the scale will dissolve or soften. Then drain the liquid, remove the remaining deposits with a sponge, boil a container of clean water and rinse thoroughly. If it was not possible to cope with chronic scale on the first attempt, repeat the procedure.

In order not to expose the kettle to boiling with acid, it is enough to clean it monthly without heating: dilute the acid with water, pour it into a container and drain the solution after a few hours - a small coating will disappear without a trace.

Soda cleaning

Ordinary baking soda or soda ash will help restore original cleanliness to any kettles, including electric ones.

Option 1. Fill the dishes with water, pour 1 tbsp. soda, boil and hold for half an hour on low heat. Cool, drain the solution and wash the kettle, then refill it with water and boil, removing the remaining soda. After that, rinse the container again.

Option 2. Pour 1-2 tbsp into the water boiling in the kettle. baking soda and immediately turn off the heat. After 1-2 hours, remove softened mineral deposits from the dishes, boil them with clean water and rinse again.

Cleaning old scale

Option 1. Moisten a sponge with vinegar, dip it in soda and rub the resulting slurry into surfaces covered with a layer of scale. When vinegar is combined with soda, a reaction will occur that destroys deposits; all that remains is to rinse and rinse the kettle. If the layers are thick, cleaning will need to be repeated.

Option 2. Suitable for the most neglected kettles with a thick layer of scale, but not applicable for electric kettles due to excessive aggressiveness. Cleansing is done in three steps:

1. Pour water into the container, pour 1 tbsp. l. soda, boil, set aside for 10-20 minutes, drain the solution.

2. Refill with water, add 1-2 tbsp. citric acid, boil the solution for half an hour over low heat, drain.

3. Pour water into the kettle again, add 1/2 cup of vinegar there, boil for another half an hour, drain the liquid.

Most of the scale after such a powerful attack will come off by itself, loose residues can be easily removed with a simple sponge. Then be sure to rinse the kettle, boil clean water in it 3-4 times and rinse the dishes.

How to descale the kettle: method 2 - “delicious”

Adherents of safe natural products will appreciate the method of descaling using potato, pear or apple peels containing organic acids. Cleanings need to be washed, put in a kettle, pour water and boil the liquid. After boiling, set aside the teapot with the peel for 1-2 hours, and then rinse the dishes well. The product is suitable for removing light scale deposits.

Cucumber or tomato pickle perfectly eliminates lime deposits due to the content of citric acid or vinegar. The brine must be poured into the kettle, boiled, cooled, washed and rinsed thoroughly to remove the smell of preservation. An additional bonus of the method is the removal of rust from inner surface vessel.

Lemon fights well with scale. Sour fruit should be cut into quarters, put them in a kettle, pour water, put the dishes on a small fire and boil the solution for 10-15 minutes after boiling. If the scale is not softened enough, repeat the procedure, and then rinse the kettle and rinse large quantity water.

For effective removal scale in the kettle, you can use sweet soda.

Open a bottle of drink to release gases, then pour 0.5-1 liter of liquid into the kettle, boil, let cool and rinse the container thoroughly. With a small layer of deposits, you can do without boiling - just fill the kettle with soda to dissolve the plaque, and wash it after a few hours. The cleaning effect is based on the content of citric and phosphoric acid in the drink. Choose a clear soda, such as 7UP, otherwise you will have to remove colored spots from Coca-Cola or Fanta from the surface of the dishes.

How to descale the kettle: method 3 - chemical

The destruction of scale with household chemicals is achieved by the citric, adipic or sulfamic acids included in their composition. Special funds are available in the form of liquids, powders or tablets, are applied according to the instructions. General scheme use - the solution with the cleaning agent is boiled in a kettle for 30-40 minutes, then drained. Softened scale is easily removed, and after cleaning, boil clean water 2-3 more times in the kettle to remove it. chemical substances.

Application efficiency store funds from scale is comparable to the action of vinegar and citric acid, but the latter are much more economical.

How to clean the kettle from scale and not spoil it

Even if the kettle is covered with a thick layer of plaque, do not scrape it with sharp objects, do not use hard brushes and metal washcloths for cleaning - such a cruel method greatly damages the dishes.

For careful and effective removal scale, wash the inside of the kettle well, and then use home remedies or chemicals to dissolve or loosen the lime coat. After cleaning, be sure to wash the kettle with a sponge or soft brush, boil water in it a couple of times and rinse the dishes again to avoid poisoning.

The frequency of descaling the kettle depends on the hardness of the water used, but try not to start the process - with each boil, the crust of plaque becomes more durable and thicker. Preventive care will help minimize its formation:

rinsing after each boil and washing the kettle daily with a sponge;

the use of filtered water, each time fresh - repeated boiling increases the precipitation of salts;

draining water from the kettle at night or during a long "downtime".

The choice of ways to clean the kettle from scale is quite large, and home remedies are as effective as store-bought ones. The main thing is not to forget to repeat the procedure regularly.

The main problem in using an electric kettle is plaque, which eventually accumulates on the inner walls and spirals. Scale not only spoils appearance device. With an increase in the lime layer, the operation of the device becomes more and more unsafe, and the taste of the water heated in such a kettle has unpleasant notes. Therefore, plaque should be removed correctly and in a timely manner.

First, evaluate the degree of contamination of the kettle. FROM thin layer scale will cope with such means as baking soda, vinegar, citric acid and even a carbonated drink. With more difficult problem you should contact the hardware store, where the assortment includes household chemicals to combat scale. The method of cleaning the kettle with soda was also used by our grandmothers. This method will be harmless both for the material from which the device is made, and for the water that will subsequently boil in it. Pour 1 tablespoon of baking soda into a kettle filled with water. Boil water, then let it brew for 20 minutes. Fill the container with new water, this time with the addition of 20 grams of citric acid. When the kettle boils, leave the acidified water in the appliance for up to 30 minutes, then drain it. This scheme cleaning will rid your kettle of scale, if the layer is not very thick. To remove lime scale with vinegar, pour a 9% solution into the kettle along with water in proportions of 1/2. Boil water and leave it to cool completely. As the water gets colder, the vinegar will dissolve the scale. After such cleaning, the kettle should be thoroughly washed from the inside so that the acid remaining on the walls does not enter your body. In the fight against scale, use citric acid. You only need to bring water to a boil, after adding 1 sachet of citric acid to it. After this method Cleaning should thoroughly wash the remnants of the product from the walls of the device. For this purpose, boil clean water in the kettle several times and drain it each time after boiling. A non-standard, but effective method of removing plaque is the use of soda. Choose water without dyes so that after descaling you do not have to rack your brains on how to clean the colored drink from the appliance. Fill the kettle with carbonated water and bring it to a boil. You will be surprised how easy plaque will disappear from the walls of the device. If the deposits inside the kettle cannot be cleaned in any way folk methods, purchase special household chemicals at the hardware store. These are antiscale from different manufacturers. Use them according to the instructions. Most often, the kettle should be boiled with this tool, and the plaque will dissolve under the action of acids. Remember that, like any household chemicals, decalcifiers leave behind harmful particles that can get into your stomach with water. Therefore, if possible, clean the device as often as possible so that decalcifiers are not needed.

Even if you have a home water filtration system and only boil purified water for making tea,

Still, the formation of scale cannot be avoided. Filters are not able to remove all substances dissolved in the water that are responsible for the formation of lime deposits.

And sooner or later you will find that the walls and bottom of your favorite whistling kettle or the heating element of an electric boiler are covered with a layer of dirty yellow coating. This means that it's time to remember how to descale the kettle and restore its cleanliness both outside and inside.

When cleaning, do not forget that not all products are equally suitable for conventional and electric vessels.

Why you need to remove limescale

There are several reasons for this, and each is quite serious.

• The lime layer prevents heat transfer. If this is not fatal for an ordinary stainless steel kettle, then an electric one can simply burn out. The heat from the spiral or disk is not transferred to the water, the metal is subjected to thermal overload. In conventional kettles, this increases gas consumption: water heats up more slowly.
• The scale layer makes it difficult to keep the vessel clean. Particles of lime sediment get into your cup, and all this garbage is not useful for the body at all.

Descalers

In the store you can buy ready-made products that remove scale. Some of them are quite effective, others may not give the desired effect.
And it depends not so much on the quality of household chemicals, but on other parameters: the composition of the water in your water supply, the thickness of the layer of lime deposits, etc.

How to clean the kettle from scale at home

Lime deposits are successfully removed by simple and cheap means:

• citric acid;
• canteen or apple cider vinegar;
• soda;
• lemons, apple peels or potato peels;
• pickle from cucumbers or tomatoes;
• carbonated drinks: Coca-Cola, Sprite, Fanta.

♦ citric acid you can descale any kettles: stainless steel, ceramic, enameled, electric plastic or glass. This simple substance removes small and medium build-up.

Ingredients: water - about 500 ml and citric acid - 1-2 tbsp. spoons (depending on the degree of contamination).

Pour water into the kettle and boil, then pour citric acid into boiling water and wait for the water to cool for about 1-2 hours (be careful - the acid that gets into the hot water will “hiss”). If the scale is not old, then it will come off on its own, otherwise you will need to make a little effort: carefully clean the walls and bottom with a plastic washcloth or brush.

Metal hard washcloths should not be used to remove scale.

Citric acid can be substituted fresh lemons: coarsely chop one or two lemons, boil them and leave to cool.

♦ Manufacturers of electric kettles do not advise using vinegar to remove mineral deposits - after all, it is too aggressive. But sometimes without it strong remedy can't get by.

The method is suitable for: plastic, glass and metal teapots with a very large amount of old scale.

Ingredients: water - about 500 ml and vinegar 9% - a little less than 1 cup or vinegar essence 70% - 1-2 tbsp. spoons.

Pour water into the kettle and boil it, then pour acetic acid into boiling water and leave the scale to soak in the solution for 1 hour. If the scale has not gone away on its own, but only loosened, then it will need to be removed with a sponge. Remember to boil water in a clean kettle once or twice, and then rinse it well to wash off any remaining vinegar.

♦ enameled and aluminum cookware afraid of aggressive acids, so the first 2 ways to remove limescale are not suitable for them, but the usual one can help you soda solution .

The method is suitable for: descaling both in ordinary enameled and aluminum kettles, and in any electric kettles.

Ingredients: baking soda, and preferably soda ash - 1 tbsp. spoon, water - about 500 ml (the main thing is that it covers the entire limescale).

Recipe 1: to remove scale from the walls of an enameled or aluminum kettle, you must first mix soda with water, then bring this solution to a boil, and then leave it to simmer over low heat for half an hour. At the end of the procedure, we wash off the remnants of soda, for which we boil clean water 1 time, drain it and rinse the kettle.

Recipe 2: to clean an electric kettle with baking soda, you need to boil water, make a soda solution, and then let it cool for 1-2 hours. A more gentle way is to pour soda into boiling water, and then leave the solution to cool completely - during this time, the mineral deposits will become softer, and it will be easier to wash them manually.

♦ Removes small deposits successfully boiling apple peels or potato peels.

This product is suitable either for preventive care or if the limescale is still weak.

The method is suitable for: descaling conventional enameled and metal kettles.

Ingredients: apple, pear or potato peels.

I put block, pear or washed potato peelings in a kettle, pour water and bring to a boil. As soon as the water boils, leave the peel to cool for 1-2 hours, and then wash the softened plaque with a sponge.

♦ Works well with layers of scale cucumber or tomato pickle. The organic acids contained in it dissolve lime deposits. But then it is quite problematic to eliminate the smell of pickles, and it does not harmonize too much with tea and coffee.

♦ Carbonated drinks remarkably dissolve resistant lime layers due to the content of phosphoric acid. Many people know that Coca-Cola can be used to remove scale and rust not only from a kettle, but also from other household items.

Coca-Cola removes old greasy contaminants in the sewer, it dissolves traces of rust on old bathtubs and washbasins, etc.

The method is suitable for: descaling in ordinary stainless steel kettles and for electric kettles, but for enameled and tin ones - with caution. If you want to descale a white kettle, then it is better to do it not with Coca-Cola or Fanta. These intensely colored liquids leave a colored coating on light-colored materials, which will have to be dealt with separately. Better take a colorless soda: "Sprite", 7UP. The effect will be the same as when brushing with Coca-Cola, but without the color effects.

Before descaling the kettle with carbonated drinks, all the gas must be removed from them. Open a Coke bottle and leave open for a few hours before cleaning. Otherwise, when boiling the drink, it forms foam in such quantities that you clean the kettle not only from the inside, but also from the outside, and at the same time the entire kitchen :).

This method is not the most efficient and economical, but why not try for fun?

How to deal with old deposits

The most powerful, old scale deposits are removed in several stages. You will need soda, a solution of citric acid and vinegar.

First, you wash the kettle inside and out as much as possible. Then pour half a glass of soda inside, pour water and boil the solution for about 20 minutes. You can leave the soda solution to cool, or drain it immediately. Soda itself does not remove scale, it will only help to cope with thick deposits.

At the second stage of the fight against scale, you need to pour a solution of citric acid into the vessel: about 40 g of powder will be needed for 3 liters. Acid with soda, absorbed into the layers of scale, will react. In this case, gas will form, the bubbles of which will loosen the limescale.

When you drain the citric acid solution, you can boil the kettle with the soda solution again, or you can immediately proceed to the next step: act on the scale with vinegar, table or apple cider vinegar. Boiling with vinegar will dissolve the most stubborn layers. Pour a third of the volume of vinegar into the vessel, and add the rest with water and boil for 30 minutes over low heat. Drain the solution and wipe the inside of the vessel with a washcloth of medium hardness (but not metal).

Cleaning the kettle from scale with vinegar.

After cleaning, you will have to thoroughly rinse the kettle and boil water in it two or three times, draining it. This method is only suitable for ordinary kettles; for electric kettles, it can be overly aggressive and destructive.

• Do not leave water residue in the kettle after use. This habit increases the amount of calcium sediment on the walls of the container. Pour water for plants or separately into a carafe and use it cold, or boil the amount of water you want to use.
• The more often you remove scale deposits, the easier it will be to do it. Descale the kettle at least once a month if the water is medium hard and once every two weeks if the water is hard. This will help save the device and extend its life.
• Use only filtered or distilled water for boiling.
• Rinse the inside of the kettle with a washcloth after each boil to remove the slightest trace of limescale.

How to remove scale from the kettle? Vinegar, citric acid or Coca-Cola? Checking folk ways fight against scale!

PS. Buy an electric kettle with a closed coil or heating disc. They are much easier to care for than open coil models. It will also be easier to remove the scale that has appeared.

Note to the owner.