How to make a palm tree from bottles. Exotics from garbage, do-it-yourself palm tree from plastic bottles

Summer residents who spend the summer on their garden plots face the problem of recycling by autumn plastic containers from all sorts of soft drinks. Palm from plastic bottles can be an unexpected way to turn trash into a garden decoration.

How is this possible? It is very simple, if you carefully study the instructions for making palm trees from bottles, prepare everything necessary tools, expendable materials, and be sure to stock up on a good mood.

Bottle palm tree: possible benefits and methods of application

As you know, the plastic used for the production of food packaging does not decompose for hundreds of years when it enters the soil. Centralized removal of this kind of garbage is not established everywhere, and no one wants to litter nearby territories with plastic waste. What should a summer resident do in such a situation? Is it really necessary to carry used plastic bottles to the city?

Don't rush! If you carefully collect bottles of brown and green plastic, in the off-season, the whole family can turn this container into an unusual evergreen tree in an evening.

A palm tree from bottles will perfectly decorate:

house territory;
unsightly corner of the garden;
plot next to outbuildings;
playground;
a border of land near an open .

A palm tree made from plastic bottles according to the instructions below can be a spectacular decoration at any party, wedding, theme party or children's party.

Making an original decor item will not cause difficulties even for people who are far from this kind of creativity. The main thing is to prepare everything you need before making a palm tree out of plastic bottles.

What is required for a palm tree from plastic bottles?

What should be stocked up before starting work? First of all, home master you will need plastic bottles of green and Brown color. Green ones are blanks for the foliage of a tree, and brown ones are the future trunks of an evergreen beauty. At the same time, the height of the plant and the splendor of the crown directly depend on the amount of collected containers.

Scroll necessary materials and tools for creating a palm tree from bottles includes:

plastic container;
sharp clerical knife and scissors;
strong tape;
metal rod or plastic tube for the trunk;
thick rope or braided wire for the base of the leaves.

When choosing plastic bottles for palm trees, you need to take into account that trunks and leaves made from containers of the same diameter look better. If there are smaller green bottles in stock, they can be used for leaves in the middle of the crown, but brown small vessels will have to be used for tree trunks of a different type or size. Different shades of plastic are not a hindrance. They will only give the man-made plant liveliness and brightness.

Bottle palm tree: instructions for making

A step-by-step description of all the intricacies of creating a plastic tree will help you quickly, literally in an evening, step by step a palm tree from plastic bottles of the intended height.

The process consists of three steps:

leaf assembly;
creating a trunk of a plastic plant;
connection of all parts and installation of the finished tree.

Before making a palm tree out of plastic bottles, the container must be washed and all paper and film labels removed from it.

Although there are a lot of options for creating a plastic tree, the most lush long leaves with any chosen method are obtained from large, for example, two-liter bottles.

Making a palm tree crown from bottles

For prepared green bottles, the bottom part is cut off with a clerical knife or scissors. It is no longer needed, and the upper half will become a blank for the sheet.

It is carefully cut into thin longitudinal strips towards the neck. The larger the diameter of the plastic bottle, the thicker and more magnificent the green palm leaves will turn out.

These are not the only option for creating leaves. If you cut the top of a plastic bottle, as in the photo, into four “petals”, and then cut each of them several times, you will get beautiful feathery foliage.

The resulting leaf fragments are sequentially strung on a strong rope or strong electrical cable. A lid is necessarily screwed onto the first blank in order to fasten the “petiole” of the sheet at the top with a knot. The last part of the bottle is twisted in the same way.

A palm tree made of plastic bottles can have a top of any size, but trees with a crown of at least 5-7 leaves look better.

At the base of the finished palm leaves there should be a long stalk in order to assemble and securely fix the entire structure later.

Assembling a palm tree trunk from bottles

To get a tree trunk that looks like a natural tree, you will need almost the entire bottle, except for the bottom itself.

From the bottom, almost to the very neck, longitudinal cuts are made on brown bottles, dividing the container into equal petals.

Only a small fragment of the bottom goes to waste

This is how the finished part of the future palm trunk from bottles looks like.

The assembly is carried out in the same way as the green leaves of the tree were collected. To secure a palm tree in an upright position, its trunk will need a strong, rigid core. It can be made from a metal bar of suitable length and diameter or a tube.

Assembling a palm tree from plastic bottles

Finished palm leaves are attached with glue or adhesive tape to the top of the tree so that they form a uniform, diverging crown on all sides.

This is what the top of the tree looks like.

The structure is quite heavy. Therefore, it is desirable to fix it with such a heavy base. If it is not possible to make a welded platform or suitable material, a hard plastic or metal base of the stem is buried at least half a meter. Such a kind of "root" in the pit is strengthened with brick chips and compacted after filling with soil. large trees better concrete.

A video on how to make a palm tree for a personal plot out of plastic bottles will explain all the nuances of the creative process, help you turn a yard or garden corner into a real oasis with your own hands.

One of the options for making palm trees from bottles - video

Today, the owners of cottages and household plots are trying in every possible way to decorate the exterior. There can be many ways, starting with landscaping and ending with some kind of buildings. One of the most budget options can be called from plastic bottles. In this article, we will tell you how to make a palm tree for your backyard from plastic bottles.

Materials for palm trees from bottles:

green and brown plastic bottles;
scissors;
Metal sheet;
metal rods;
metal bushings and tubes;
high voltage cable.

1. Prepare the bottles in advance and clean them from the labels. Start by making palm leaves from green bottles. To do this, cut the bottle in half.

2. Cut the strips on the top of the bottle lengthwise but not all the way through.

4. For one palm tree, you will need 7 palm leaves, the length of which you can adjust yourself.
5. To make a barrel, take brown bottles and cut wide strips on them. You should get 6 wide strips along the entire bottle of 2.5 liters.
6. Also string blanks for the barrel onto a high-voltage metal cable.
7. Start preparing the base for the palm tree.

8. Weld two metal rods (at least 25 cm long) onto a sheet of metal. The rods need to be welded under different angles.
9. Take tubes with a diameter of 2 cm, put them on the rods. Weld metal bushings onto the end of the rod so that later palm leaves can be passed through them.

11. Start assembling the barrel from the bottom up.

12. After the entire palm structure is assembled, bury it in the ground to a depth of 0.5 m.

Do-it-yourself palm tree from plastic bottles ready, now you can create a whole paradise on your backyard. Do not be afraid to fantasize, palm trees can be of any size, and instead of coconuts, attach bright plastic bottles for juice or sweet water.

You can come up with your own scheme palm trees from plastic bottles.
The first plastic bottle was developed in 1941, and today it is used not only for household purposes and for storing water, but also as a convenient and inexpensive material for drinking.

A spectacular and eye-catching palm tree from bottles will serve as an excellent option for decorating a summer house, garden plot, playgrounds in the yard or kindergarten. Made by hand according to a simple scheme, it will not only decorate surrounding area, but also help a person to utilize a large number of plastic containers.

How to make a palm tree from bottles with your own hands

Those who like to realize the most incredible fantasies will like a master class on how to make a palm tree from plastic bottles. For a tree, dark brown containers are suitable as stem blanks and green to make leaves. If there is no green container, it can be replaced with the most different colors: blue, yellow, red. For trees, containers from kvass, carbonated sweet drinks or beer are useful.

The principle of creating a palm tree differs depending on what the craftsmen found. To form the trunk, you can use a round support made of wood, where the bottoms are nailed, or a cable with wire is suitable, where containers with cut bottoms will simply be strung. Leaves differ in splendor and length. If you want to get palm fans, then they are cut, notched and bent, and the elongated leaves are strung on a cable.

The area of the leaves and the trunk depends on the size of the bottles, but you should not get carried away and use a 6-liter or 20-liter container from under the water. A tree from 1.5 and 2-liter plastic containers looks much neater. different colors. Corks from them will also serve as a material for decoration - they decorate the base of a palm tree, you can make a mosaic out of them for flower beds, walls of houses for children.

How to make palm leaves

To get a spectacular palm tree with your own hands, you need to pay attention to the manufacture of its leaves. To make them, you need:

Cut the green bottles in half with scissors, cut the upper part into longitudinal strips so that the neck of a narrow diameter remains intact half a finger from the lid. The thinner the cut strips of plastic, the more magnificent the crown turns out and the more natural it looks in the photo.
Taking containers for leaves is not necessarily the same - this will not affect the appearance. The resulting blanks must be strung on a prepared hard high-voltage cable with a diameter slightly less than the neck to obtain one lush sheet. The number of leaves varies according to the prepared holes on the metal pipe used as a support. Then they should be fixed on the stem blank.

Step-by-step instructions for making a bottle palm trunk

The next detail in the question of how to make a palm tree from plastic bottles will be the trunk. Step-by-step instruction:

The trunk is made from dark brown dense containers, from which the bottom is cut off right along the contour.
Then the resulting workpiece is cut to obtain segments bent inward, serving as an imitation of a tuberous trunk. Cut them should be 2/3 of the height, without affecting the top.
Do right amount segments costs depending on the desired height of the plastic palm.
When all the blanks are ready, you need to string them on metal tubes. To do this, the container with its neck down sits on another with a slight shift to obtain a beautiful tuberous trunk. The principle of stringing is similar to making a cone. After that, all parts are fixed.

Connecting individual parts and installing a palm tree on the site

The last step on how to make a beautiful palm tree from plastic bottles is to connect all the blanks together. What should be done:

Prepare a rigid, solid base from a metal sheet approximately 40 * 60 cm in size and at least 5 mm thick to support the weight.
2 metal rods with a length of 25 cm or more should be welded to the base or holes should be made with a drill for fixing. They need to wear metal pipes the desired height - this will be the base of the tree. At the same time, the diameter of the pipes is left slightly less than the neck of the bottles for the barrel.
The upper part of the supports will outwardly resemble a revolver drum; for this, 6-7 pipe sections are welded onto them. Bottles for the barrel must be assembled on rods, and palm leaves are inserted into the holes of the "revolver". For fixing, the cable inside them is bent, fixed from the side of the top and inside the neck of the outermost bottle. For the stability of the bottle structure and hiding the ugly lower part, the base is buried half a meter.

Do you want to decorate your household plot interesting handicrafts? Create a work of art on your own from improvised materials? A plastic bottle palm tree is what you need, it will turn the territory into an amazing exotic garden and will be pleasing to the eye long years. Our master class is dedicated to how to make a palm tree from plastic bottles with your own hands in stages from used PET containers.

If you have a desire and a creative impulse, let's get to work.

Materials and tools

First of all, we will determine the quantity and quality of materials. What container is suitable for our crafts? Of course, every home has used plastic bottles, but are all of them suitable for our work? Of course not. We strictly choose only brown and green bottles for the trunk and crown. For a larger plastic beauty, a 2-liter container is best suited; for a smaller tree, a one and a half liter container will do.

We will need:

15-20 brown barrel bottles big tree and 15-10 for a small one;
6-8 bottles of green to create 1 palm leaf;
stationery knife or scissors;
metal rod or wooden handle for attaching the trunk;
wire and rope;
Scotch.

Below is detailed instructions for the manufacture of palm trees with diagrams and photos.

Getting Started

Action algorithm:

We create a crown for trees;
We make the trunk;
We combine structural elements;

Let's start creating the leaves. To do this, take a green bottle and, using a clerical knife or scissors, cut off the bottom, as shown in the photo.

Then, on the resulting workpiece, stepping back from the throat 3-4 cm, we make frequent longitudinal strips.

Note! The more often the stripes go, the more fluffy our leaves turn out.

In the same way, we prepare 5 more blanks. We insert the resulting blanks on top of each other. In order to fasten them together, we use a wire or rope: we pass it through the neck and fix it. The first sheet is ready.

We bring to your attention the second method of making palm branches. To do this, take a green bottle, use a clerical knife to remove the bottom. Visually divide the bottle into four parts, cut. It turns out the workpiece, as shown in the photo below:

Then we decorate the resulting sheets, for this we make sharp teeth along the perimeter of the leaves, unbend the resulting fluffy leaves outward, and fix it.

Repeating steps 1-3, prepare the remaining parts of the crown. We remind you that at least 6-7 leaves are required for one palm tree.

The procedure for creating leaves can be represented schematically:

We proceed to the manufacture of the trunk. As we know, in nature, the trunk of a palm tree is covered with scales. In order for our exotic plastic beauty to be as similar as possible to its natural counterpart, we will try to recreate the natural relief of its base. This will require almost the entire bottle of brown.

Carefully cut off the bottom.

Cut the bottle into 6 equal scales. It turns out such a wonderful "chamomile".

We create similar daisies for two trunks of palm trees. We collect them together and fasten them in the same way as the leaves. The trunks are ready.

The number of blanks depends on how tall the trees you are going to make.

The resulting bases should hold the crown tightly, for this it is necessary to strengthen them with reinforcement or a wooden handle as shown in the diagram.

Quick assembly

Now that all the structural elements are ready, let's start assembling. There are several layout options for prefabricated elements. Let's take a simpler one. We prepare the crown of the trunk, cut off the throat from the brown bottle. Almost at the very bottom we make several cruciform cuts. Here we will insert our crown. The assembly process is more clearly presented in the diagrams below.

Important! For the resulting masterpieces, it is necessary to make a foundation so that they hold well in the ground and do not sway.

If you have the opportunity, you can prepare a welded structure for its subsequent concreting.

What wonderful and unique trees we got, in this way, you can create a whole exotic evergreen alley in your garden to the envy of your neighbors. Imagine and create interesting crafts for your site, involve children in the work.

Turn on your imagination and decorate your tropical beauties with smaller multi-colored bottles: add bananas and coconuts to palm trees.

Pay attention to the creations of your colleagues, take note and use your favorite techniques and elements in your work. Some of the options for work are shown in the photo below:

Video on the topic of the article

We offer you to consider video tutorials from experienced craftsmen:

many owners summer cottages tend to decorate household territory. Gypsum figurines are often used for this. Recently, however, handicrafts from improvised, often junk materials have become increasingly popular. Products made from plastic bottles have won special love among craftsmen. Craftsmen create a wide variety of compositions from them with their own hands, including exotic trees.

Bottle crafts: a variety of options

You can decorate your backyard with various crafts made on the basis of plastic bottles. This solution simultaneously solves 2 problems - waste disposal and decoration of the territory.

With the help of this improvised material, you can arrange flower beds. Craftsmen also create from it:

stuffed;
curly flowers;
sparrows;
trees.

From waste raw materials, original volumetric flower arrangements, decor for decoration mirror frames, unusual pots, plants, seals. Through such garbage, you can make cute and funny cats that will become calling card garden.

However, in recent years, unusual plastic palm trees. There are several manufacturing technologies tropical tree. In any case, the composition is extraordinary and catchy.

Palm tree from plastic bottles: step-by-step instructions with a photo for creating the base of the trunk

Based on the photo and step-by-step instructions, it will not be difficult to create a palm tree with your own hands. You can involve children and all household members in the process, as it is truly exciting and interesting.

For work you will need to prepare:

at least 100 pieces of plastic bottles of brown and green color;
a candle;
wire;
iron pin or fittings;
scissors.

On a note! To create an extravagant tree, you can use material in other shades. If there is no raw material of the required color, it is worth using transparent bottles, which are then easy to paint.

It is optimal to use containers with a volume of 1.5-2 liters. From them the construction of the most natural appearance.

Step 1 - First prepare the trunk of the palm tree. Brown containers are used for this. With a knife they are cut in the middle. The bottom fragment is recommended to be made a little larger. You don't need to throw anything away. Everything will be used in the work.

Step 2 - The half with the neck is cut. This must be done in eight places. The incisions are made to the area of narrowing of the container.

Step 3 - A petal is formed from each received fragment. It is optimal to give each part the shape of a triangle. At the same time, a fold must be made at the base, after which peculiar flowers should be opened from them.

Step 4 - Fragments with a bottom will need to be cut in the same way. In the middle of each part, it is still necessary to make a hole with a diameter equal to the size of the neck.

On a note! To make it easier to work with plastic, it is recommended to use a hot knife.

Do-it-yourself palm tree from bottles: we make foliage

After the base is ready, you can proceed to the creation of foliage. Based on the master class, the work will not seem difficult. For this you need to use green bottles.

Step 1 - Cut off the bottom of the bottles and the neck.

Step 2 - Moving from below, it is necessary to cut the workpiece into equal parts with scissors. Should get at least 3-4 fragments. In this case, you do not need to reach the very edge. It is optimal to leave an edge 2-3 cm wide. The fragments should have a base.

Step 3 - Shaping the sheets. The lower parts of the cuts will need to be slightly twisted to make them round. In the neck area, it is recommended to narrow the fragments, after which they need to be straightened on a flat surface.

Step 4 - All large parts must also be cut on each side. 2 cm should remain in the center. Scissors must be placed along an oblique path. The cuts should go to a narrower center from the sides that have been rounded.

Note! To make the composition lush and voluminous, each strip must be unbent through one up and down.

How to make a palm tree from plastic bottles: assembly video

When all the fragments for the palm tree are prepared, you can start assembling the composition with your own hands.

On a note! Iron pin or polypropylene pipe perfect for stock. The main thing is that the diameter is small, since all workpieces will need to be attached to this material.

After selecting the stem and forming the elements of the plastic exotic tree you can assemble the composition. It is recommended to alternately thread fragments onto the barrel. Parts are fixed upside down. Larger parts come first, and then smaller ones.

When most of the trunk is ready, you can move on to the foliage. At a height between the brown elements, petals must be inserted. It is recommended to work in a checkerboard pattern. The first piece of green color should be fixed on the pipe with tape. Then the leaves also need to be fastened alternately so that the gaps are securely hidden.