Top 10 best geysers. Geysers

A gas water heater in an apartment or a private house allows you to provide residents at any time hot water. In addition, it makes it possible to save money, since heating occurs only on demand and payment for gas is cheaper than for hot water from the central water supply. Given the potential danger of such equipment, the choice must be approached very responsibly. A cheap low-quality, defective or fake column will pose a threat not only to property, but also to people's lives. The following is a rating of gas water heaters in terms of reliability and quality in 2018 according to the Mark.guru portal.

To make a choice which geyser is better, take into account the following features water heaters:

1. Water heater type. There are flow (columns) and storage (boilers). The former are compact in size, but at the same time must have high power. The second type has storage tank, the volume of which can reach 500 liters. It is advisable to have this type in a private house.
2. Performance. Determines the power of the column, how much water it can pass per unit of time. On average, a capacity of 10-13 liters per minute is enough for an apartment.
3. Possible pressure for which the water heater is designed. It's about about the minimum required pressure to turn on the column, as well as the maximum that it can withstand. These indicators directly affect the reliability of the device.
4. Ignition type. In outdated systems, a manual or electromechanical type is used, in modern ones it is used electronic control. In this case, power can be supplied from electrical network, from a battery or a hydrogenerator can stand. The latter type is rarely used because of its high cost.
5. The presence of a power regulator. Allows you to change the intensity of combustion depending on the pressure of water.
6. Heat exchanger material. Can be steel or copper. It is better when purified copper is used, since the presence of impurities impairs heat transfer.
7. breeding carbon monoxide . It can be carried out into the chimney or through a hole in the wall to the street using forced ventilation.
8. Security. The best geysers have various sensors and automatic shutdown systems when conditions arise that create a danger of using the device.

1 Mora Vega 10

Easy to use and very compact water heater will fit for an ordinary city apartment. It is able to operate at a pressure in the system from 0.2 to 10 atmospheres. It is switched on by means of an electric piezo ignition. The heating capacity reaches 10 liters of water per minute. The boiler has the highest efficiency in its class, reaching 92%.

The column meets all modern safety requirements. The burner is switched on and off automatically depending on the water supply. If the gas goes out or the temperature sensor network is broken, the gas supply will be closed. The water temperature limitation system guarantees the exclusion of its excessive overheating in the heat exchanger. If combustion products enter the room, the reverse thrust fuse will work and the water heating will be turned off.

The innovative design of Metrik fittings allows you to use the column with a weak flow of water, maintain the set temperature even with pressure drops, and also avoid leaks.

Advantages:

• stable and reliable operation;
• fast heating;
• the ability to regulate the temperature;
• Availability automatic systems security control;
• the design prevents the deposition of salts and clogging of the system.

Disadvantages:

• insufficient heating of water in the cold season;
• high price.

The average price is 19 thousand rubles.

Prices for Mora Vega 10:

2. Roda JSD20-T1

The German water heater Roda JSD20-T1 has a closed combustion chamber, carbon monoxide is discharged outside with a fan, air is also taken from the outside. It has excellent performance at a pressure of 0.3 atm, and is able to withstand a maximum of 7 atmospheres. The efficiency is 85%, it also has a good capacity of 10 liters per minute.

Unlike the previous model, Roda JSD20-T1 is equipped with electric ignition. The igniter turns on automatically when water is supplied. The device has a draft sensor and a system automatic shutdown in case of problems with ventilation or smoke removal. Shutdown also occurs when the heat exchanger overheats. If the flame suddenly goes out, the gas supply will be cut off. To protect against overpressure, a special safety valve is provided.

The frost protection system automatically turns on the heating of the heat exchanger if the temperature in the water heater drops below 5 degrees Celsius.

Advantages:

• quality and reliability;
• high level of security;
• the ability to regulate not only the temperature, but also the power of the burner;
• corrosion and overheat resistant heat exchanger guarantees long operation even under heavy loads;
• closed combustion chamber;
• safety coaxial chimney included.

No deficiencies found.

The average price is 11 thousand rubles.

Prices for Roda JSD20-T1 :

Geyser Halsen WM 10 Russian enterprise, but Chinese assembly, capable of operating in systems with a low pressure of 0.3 atm., At the same time, it can withstand up to 8 atmospheres. Ignition automatic electric powered by batteries. In general, it is quite modern and safe device. Capacity 10 liters per minute. Shutdown is provided when the burner goes out and the heat exchanger overheats.

The heat exchanger is made of oxygen-free copper.

Advantages:

• good performance and efficient operation;
• modern design;
• temperature and flame level adjustment;
• low cost.
• No deficiencies found.

The average price is 8 thousand rubles.

Prices :

Almost all models of the Italian brand Zanussi have battery-powered electric ignition, and the GWH 10 Fonte is no exception. The heat exchanger has an anti-corrosion coating, and the nozzles are made of stainless steel. If you replace them, you can reconfigure the boiler to work with gas cylinders. Rotary controls allow you to adjust the burner power and water temperature, and the current status is shown on the display.

The display only works when turned on. hot water, in the standby state, it turns off.

For safe operation, water overheating and carbon monoxide sensors are used. Open combustion chamber, capacity up to 10 liters per minute. It can work at a pressure in the system from 0.15 to 10 atmospheres.

Advantages:

• economical gas consumption;
• compact;
• low price.

Disadvantages: there is no smooth regulation of heating during pressure drops.

The average price is 5400 rubles.

Prices :

5 Mora Vega 13

In terms of functionality, this model practically does not differ from the rating leader. There are the same security systems, adjustments. The column is just as suitable for use with low water pressure from 0.2 atm and has a high efficiency of up to 92%.

Its distinctive feature is its high productivity, which reaches 13 liters per minute, and, accordingly, a higher price.

A column capable of smoothly maintaining power and maintaining desired temperature water, regardless of changes in the system. There is also a piezoelectric ignition, for the removal of carbon monoxide, a chimney diameter of 135 mm is required.

Advantages:

• stable heating and temperature maintenance;
• security;
• fast heating;
• power;
• economy.

No faults found, good value for money.

The average price is 21,000 rubles.

Prices for Mora Vega 13:

The flowing geyser Gorenje GWH 10 NNBW can operate at a pressure of 0.2 to 10 atmospheres. Ignition occurs automatically when water is supplied. The model provides for separate adjustment of the water and gas supply, the temperature is easily adjusted and smoothly regulated. The required flue diameter is 110 mm. The efficiency is 84%, the productivity is 10 liters of water per minute. The necessary protection systems are present with automatic shutdown. The column provides instant water heating with high efficiency, has a modern design.

The kit includes a set of filters for water and gas.

Advantages:

• security;
• smooth heating;
• convenient adjustment;
• simple installation;
• works well at low pressure.

Cons: Noisy according to some reviews.

The average price is 7300 rubles.

Prices :

7. Bosch WR 10-2P

The Bosch WR 10-2P model is designed for a capacity of 10 liters per minute and has a piezo ignition. This is a very popular model, like the brand as a whole. Good decision for a small area of ​​​​housing, when consuming water in the sink and shower. Equipped modern systems security, and the period of continuous operation is not limited in time. The set water temperature is maintained even when the pressure changes. There is a sensor to protect against overheating, as well as from exceeding the concentration of carbon monoxide. If there is a threat to the safety of work, the shutdown occurs automatically.

Bosch WR 10-2P operates at an exceptionally low pressure of 0.1 atm.

Advantages:

• uniform heating;
• quality performance;
• profitability;
• can run on liquefied gas;
• security.

Disadvantages:

• mechanical ignition;
• in some cases, water leakage has been noticed after several years of use.

The average price is 10,000 rubles.

Prices for Bosch WR 10-2P:

This model from Bosch has the same capacity of 10 liters per minute, but has electric ignition from batteries. Operates at a low pressure of 0.15 atm. It can operate on both natural and liquefied gas. The efficiency reaches 88%. The column is equipped with flame control sensors, carbon monoxide removal, overheating protection and heating temperature limitation. Manual regulation of water flow and gas power is carried out separately.

Advantages:

• electric ignition;
• work from cylinders is possible;
• low price.

Disadvantages: noisy when ignited.

The average price is 8300 rubles.

Prices :

9. Bosch WRD 13-2G

Bosch WRD 13-2G is a model with hydro generator for automatic ignition. A special turbine rotates from the flow of water, as a result of which electricity is produced, which is the power source for ignition. This model is average in performance in the 6000 O line, provides a heating rate of up to 13 liters per minute. Ease of operation is complemented by a multifunctional display. The boiler perfectly provides water consumption in the kitchen and bathroom. When replacing the burner, the model can be reconfigured to work on liquefied gas.

It turns on at a minimum pressure of 0.35 atmospheres.

Advantages:

• modern type of ignition;
• simple control;
• fast heating.

Disadvantages: the noise of the hydro generator.

Prices for Bosch WRD 13-2G:

The average price is 17 thousand rubles.

The compact water heater of the Korean brand is designed for one water intake. A feature of the model is automatic ignition and smooth adjustments. The display shows the current water temperature as well as error messages. This simple model without any special functions is well suited for Russian operating conditions, since it is able to operate at low water pressure from 0.15 atm. Provides a capacity of 10 liters per minute. The heat exchanger is made of copper.

Advantages:

• small sizes;
• stylish design;
• simple installation;
• low price.

Disadvantages: ignition batteries run out quickly.

The average price is 6 thousand rubles.

Prices :

Conclusion

As you can see, the range of prices for instantaneous water heaters is very high. Usually cheap speakers are less powerful, designed for small water consumption. If the family is large and the apartment has more than one water intake, then you should choose a more expensive heater. It is difficult to talk about the advantages of a particular brand, since a lot depends on the assembly. In addition, fakes or defective lots are often found on the market, especially for well-known manufacturers.

The type of ignition is also a matter of individual preference. Automatic is convenient for most consumers, but many find that it fails faster. And if the power comes from batteries, and not from the network, then there is a need for periodic replacement. But it is not required to connect the device to the network. So the final choice of a geyser will vary depending on preferences and conditions of use, and the rating according to the Mark.guru portal will help identify and compare the best models in terms of a combination of reliability and quality.

A gas water heater is an instantaneous water heater that runs on natural gas. If you do not have hot water supply, but gas is supplied, this equipment will increase the comfort of your life. You just open the tap, hot water runs out of it, and its temperature is regulated by you independently. Even if you have a centralized supply of hot water in your house or apartment, but you are not satisfied with the price you have to pay for heating, or perhaps you are not satisfied with the temperature, installing a geyser will also solve these problems. Heating water costs much less than it is provided centrally - that's a significant savings on utility bills. To understand which gas column is better, you will have to study the structure of the equipment and its types. Then the choice for you will be simple and conscious.

The structure of the gas column

• gas burner and gas exhaust system;
• heat exchanger;
• ignition and control module.

All these nodes have several modifications and their layout gives different models with different characteristics. All this allows you to choose a unit for your own requirements, because you can only say which gas water heater is better by being tied to a specific situation.

Ignition type

In order for the column to start its work, it is necessary to ignite the gas. Old models were lit by hand, bringing a burning match to the igniter. Today, such units are no longer on sale, they are a thing of the past. They were replaced by others that work in automatic or semi-automatic mode.

Piezo ignition

In geysers with a piezoelectric element, ignition occurs in a semi-automatic mode. There are two burners - main and pilot. The pilot burner is a small wick that burns constantly, whether there is hot water flow or not. The main burner turns on only when the valve is opened. The rest of the time it is off.

The procedure for starting a gas column with piezo ignition is simple: press the button displayed on the front panel, a spark appears on the candles, which ignites the pilot burner. When a hot water tap is opened, gas is supplied to the main burner, ignition takes place from the pilot burner. While water is flowing, both burners are lit. The valve was closed, the gas supply to the main one stopped, only the pilot one is on fire again.

Piezo ignition device for gas water heaters - a simple and inexpensive device

What are the advantages of geysers with piezoelectric elements? These are the cheapest models, they usually have a mechanical control - a regulator that allows you to change the height of the flame, thereby regulating the temperature of hot water. These models are non-volatile, which can be important for giving.

There are more disadvantages and they are more serious. The wick burns (should burn) constantly while you use the column, and this is gas consumption. Let it be small, but constant, as a result, quite a decent amount accumulates in a month. So it's far from the best. economical way heat the water. The second minus is also associated with the burning of the wick. If it goes out, you will not be able to light the column. The wick goes out because it does not have enough oxygen to burn, or because a reverse draft periodically occurs in the chimney, which blows out the flame. Since there is a flame controller, this is not a problem - the gas is automatically shut off, but the need to re-ignite the pilot burner is unpleasant.

Electric ignition

Automatic geysers have electric ignition. This is an electric spark generator that is activated when the tap is opened. The rest of the time the gas does not burn, which significantly saves fuel. There is an electric ignition, powered by batteries, there is - from a 220 V network. Which gas water heater is better for this parameter, you have to choose according to the circumstances.

If you often turn off the light, it makes sense to choose a model that runs on batteries. As you understand, in this case, you have to make sure that they "do not sit down." If there are no problems with electricity or there is a backup power source, it is better to choose a geyser powered by 220 V. Plug the cord into the outlet once and forget about it. Electricity consumption is negligible, so they have almost no effect on the bills.

Geysers automatic machines have electronic control. A board with a microprocessor is installed in the case, the desired temperature is set from a small control panel (button or touch). A small LCD screen is often placed here, which displays the current state of the equipment, the temperature of the water, if it is being heated. This type of geyser is the best if you value ease of handling.

Disadvantages - higher price and power requirements. Electronics needs a stable voltage of 220 V with slight deviations of the order of 2 * 3 V. We do not maintain such parameters, so in order for the automatic gas water heater to work for a long time, a stabilizer is required, and it is better not a relay, but an electronic one. It not only stabilizes the voltage, but also evens out the shape of the pulses, which is also very important for imported water heaters.

Burner, combustion chamber, chimney

The heating of water in a gas column occurs due to the heat released during the combustion of gas. The combustion itself takes place in the burner, and it is “packed” into the combustion chamber. Unburned gases that remain in the chamber are discharged through the chimney. Let's consider all these devices in more detail.

Burner - main assembly

Burner

The heat source in the gas column is a gas burner. There are three types: single-stage, two-stage, modulated. The first two types have almost never been found recently - they do not allow maintaining the set temperature, therefore it makes no sense to consider them - all columns have a modulated burner.

Modulating burners can be controlled manually - with a special handle mounted on the body - or through a microprocessor that maintains the desired water temperature. Burners are made mainly of galvanized steel, as this material is optimal for the task. It is inexpensive, durable, has a high melting point, and normally tolerates frequent heating.

Types of combustion chamber and chimney

Combustion chambers in gas columns are of two types - open and closed. Their name reflects the essence:

• closed (turbocharged, fan) is a metal box into which a burner with a socket at the top is inserted to install a chimney;
• open (atmospheric) - this is actually the entire body of the column, since there is no isolated space, just a burner is installed at a certain place, there is a cover with a socket on top, to which the chimney is connected.

To different types combustion chamber requires a different chimney. In an open chamber, air is taken from the room, therefore, an effective ventilation system, a normal air supply and an atmospheric chimney leading to the ventilation duct are necessary. The closed chamber is equipped with a coaxial chimney (two pipes of different diameters inserted one into the other), which is led out through the wall to the street. In this case, the products of combustion are removed forcibly, with the help of a fan along inner tube, and oxygen enters immediately to the burner through the outer.

A gas water heater works more stably under normal conditions with closed camera combustion, but it has disadvantages. The chimney can become frosty in winter, which is why the column goes out (it is extinguished by automation that controls the removal of combustion products). The second point is that with a strong side wind, a flame can be blown out by a stream of air. The gas supply is turned off by the same automation, but the situation is unpleasant. The third circumstance is that not all city authorities allow holes in walls in houses and pipes to be introduced.

So in this case, it is difficult to say exactly which gas column is better - it depends on many factors.

heat exchanger

Water is heated while it flows through the heat exchanger. He is metal pipe installed above the burner. The shape of the heat exchanger in the geyser is special - a pipe with fins is serpentine in the lower part, then a sheet of metal is installed around it, over which the pipe is wound in a spiral. Flowing along this long path, the water is heated by the heated metal.

They make heat exchangers from galvanized steel (the most a budget option), stainless steel and copper. The best in terms of efficient heat transfer are copper. They are the most economical, but also expensive. The most durable are stainless, but they have a much worse situation with heat transfer. Which gas column is better in this case is up to you. Choose the quality that is more important to you.

If you decide to buy a gas water heater with a copper heat exchanger, do not try to find a cheap model. In order to reduce the price, manufacturers use low-quality copper, and even tubes are made with thin walls. Such a heat exchanger will serve the warranty period, and then problems will begin - a leak will appear.

If you remove the casing, you will see fistulas in the tubes through which water drips. They are located mostly in outside pipes, just in the place where condensation forms. With a normal pipe thickness, this is not scary, but thin walls quickly corrode. Such a leaky heat exchanger does not have to be changed (it costs about 1/3 of the total price), it can be soldered. You will need refractory solder with a melting point of about 200 ° C, a powerful soldering iron and soldering flux. The technology of work is usual - clean the damaged area to bare metal, degrease, tin, solder.

How to determine power

First of all, you need to decide on the power or performance of the gas column. These are two interrelated characteristics, simply reflecting different characteristics unit. Productivity is how many liters of water a column can heat per minute, and power is how much heat it can release. Some manufacturers indicate power, others indicate performance, so you need to understand exactly what you need.

Let's first figure out what kind of performance you need a geyser. It depends on the number of consumers that need to be provided with warm water. There are consumption rates for equipment of different types:

If you are connected to hot water kitchen sink, shower and washbasin, so that all three points work simultaneously and the water temperature does not fall, a performance of 4 + 4 + 10 = 18 l / min is required. This is a lot, the price tag will be solid. If you think about it, you will understand that all three devices almost never turn on at the same time. There are situations when the shower and one of the taps work together. To provide them with hot water, the productivity should be 14 l / min. This is a little more modest, but quite enough for a comfortable stay. Look for the found value in the technical specifications, it should not be less.

Now let's deal with power. Geysers can allocate from 6 kW to 40 kW of heat for heating water. Here the division is:

• a geyser with a power of up to 19 kW is suitable for heating water for one point of water intake;
• at two points, the power should be from 20 kW to 28 kW;
• three require more than 29 kW.

Now, you can definitely say which geyser is better in terms of power in relation to your needs.

What else to look for when choosing

There are a few more lines in the technical characteristics of gas water heaters that you should pay attention to. First, see the minimum water and gas pressure that this model can handle. Imported geysers of European manufacturers are more capricious in this regard - they are designed for stable pressure, they do not tolerate drops. But under normal conditions, they work stably and without breakdowns.

Some manufacturers, in order to adapt their equipment to our conditions, install gearboxes that compensate for jumps. If there is no such device in the model you like, and your water and / or gas pressure jumps, you can install the reducer on in front of the column entrance. This device is simply placed in a pipe break, installation is standard. At the same time, other consumers will be protected.

It is also useful to study the list of service programs and protection levels. The safety and comfort of the equipment depends on them. It is highly desirable to have the following functionality:

• Gas control. Monitors the presence of a flame on the burner, if it goes out, shuts off the gas supply.
• Traction control. The presence of draft in the chimney is controlled. If the combustion products are not removed, the gas supply is shut off.
• Flow control or hydraulic valve. Turns off the column if the water pressure is too weak or not at all.
• Overheat protection. The temperature sensor controls the temperature of the water in the heat exchanger; when it approaches a critical point (boiling), it turns off the column. This prolongs the life of the equipment (when boiling, the heat exchanger can break, like pipes).

These functions are necessary for the safe operation of the geyser. This is almost a standard set that is in all good gas water heaters. All others are optional. They, as a rule, are no longer so critical (for example, the remote control).

Sizes of gas water heaters and prices

The overall dimensions of gas water heaters are small - they are commensurate with a small hanging kitchen cabinet. Average height - 550-650 mm, width 300-400 mm, depth 200-300 mm. But if you wish, you can find models wide and flat, or vice versa, narrow and deep. Which gas water heater is better for this parameter can only be said by being tied to the installation site, so there is no definite answer here either.

Prices for geysers vary widely. Simple Models with piezo ignition and a galvanized burner cost from $110. Equipment with electric ignition and a bunch of service functions - up to $ 450. So there is somewhere to roam.

Name	Producing country	Power	Performance	Max water temperature	Min water pressure	The combustion chamber	Burner	body exchanger	Ignition	Dimensions (H*W*D)	Price
Neva 4511	Russia	21 kW	11 l/mm	90°C	0.3 bar	closed			electronic/batteries	565*290*220mm	175$
Electrolux GWH 265 ERN Nano Plus	Sweden/China	20 kW	10 l/min			open		copper	electronic/batteries	665*390*245mm	110$
Bosch W 10 KB	Germany/Portugal	17.4 kW	10 l/min		0.15 bar	open	stainless steel	copper	electronic/batteries	638*341*242mm	145$
Bosch WR 10 - 2P (GWH 10-2 CO P)	Germany/Portugal	17.4 kW	10 l/min	60°C	0.1 bar	open	stainless steel		piezo	638*341*242mm	167$
WERT 10EG RED GLASS	Russia/China	20 kW	10 l/min		0.2 bar	open		copper alloy	electronic/batteries	550*330*188mm	92$
Ariston FAST EVO 11B	Italy/China	19 k/W	11 l/min	65°C		open		copper	electronic/batteries	640*370*240mm	164$
Vaillant MAG OE 11-0/0XZ C	Germany	19.2 kW	11 l/min	55°C		open			piezo		177$
Bosch WR 13 - 2P (GWH 13-2 CO P)	Germany/Hungary	22.6 kW	13 l/min	60°C	0.1 atm	open	stainless steel	copper	piezo	720*385*242mm	210$
Neva Lux 6014	Russia	28 kW	14 l/min		0.1 bar	open			electronic	650*350*240mm	210$
Ariston FAST 14 CF E G20	Italy/China	24.3 kW	13-14 l/min	60°C	0.2 bar	open		copper	piezo	580*374*223mm	115$

Dramatic changes will occur in the kitchen if you replace old equipment, in particular, a column. The apartment will become more comfortable, nicer.

Choose the best option

Even if the kitchen in it is small, the column will not constrain, harmoniously complement the space. There are many differences between the new columns and the columns of past years, and they will immediately become noticeable. Among them:

• compactness;
• variety of design;
• automatic ignition;
• protection system.

Each manufacturer tries to win customers over with the strength of parts, build quality, and complement the design with relevant features - branded features. The advantages of operation, service, maintenance increase demand, the profit of the enterprise. In addition, geysers should be beautiful. Not only technical, but also external parameters matter. After viewing the photo, it is easy to understand whether it is worth buying this model. Of course, technical specifications are more important, any gas equipment must be safe. The kitchen is simply obliged to be beautiful, to inspire.

New Year brings a lot of changes

The rating of gas water heaters 2016 is losing its relevance, and it's time to make a new one, which includes models that are popular in 2017. What New Year brought to buyers, what has changed? Leading positions in the ranking of the best geysers in 2017 are not so easy to take.

The main criteria, of course:

• price;
• quality;
• reliability;
• uniqueness.

Last year, the usual cost remained, the quality remained the same, new equipment was released, fashion changed.

Who is the leader? About everything in order. In the first place - geysers with an electronic display. Reviews about them are the best, it is worth thinking about purchasing.

Such a rational, practical addition as a display is not yet available in every model. Some people need it, some don't. This detail does not particularly affect the quality, reliability, durability of the product. It guarantees a dialogue with the equipment. The temperature of the water is visible, which is easier to regulate. At the same time, gas water heaters do not change their dimensions, they remain compact, which is what people like most of all, perhaps. An electronic display is a step towards the future, therefore, it is models with a built-in display that open the reliability and quality rating of geysers in 2017.

The Russian column "Neva 4510-M" has an electronic display. It certainly matters. It is much easier to control the operation of equipment thanks to this innovation. In addition, the Neva 4510-M flow-through geysers heat up 10 liters per minute, the power is 17.90 kW, there is an overheating protection system. Quality and reliability - distinguishing feature gas equipment of this manufacturer.

In this model, both the dimensions and the design of the case are attractive - they cause sincere sympathy. "Beretta", for example, is not so elegant, although it is not inferior in other characteristics, it is just as practical. If a person likes surrealism and its fantastic images, then it is better to choose the Beretta brand. But if the classics are more to your liking, then the choice should be stopped at the Neva column, which you will no doubt like more.

The price of the Neva is also tempting. And if you can save money, there is no reason to refuse pleasant spending. This is a good purchase, it is difficult to argue with this statement, because the column will last for many years without breakdowns. It is easy to operate. Everything is provided in it.

The quality and reliability of German geysers Roda JSD20-T1 comply with international standards. The country where they are collected is China. The process is controlled, the result is checked, the factories are equipped modern equipment. Such a strategy guarantees a reduction in cost, makes gas water heaters affordable. Interesting design, convenient arrangement of elements, electronic display, warranty service - all these are Roda JSD20-T1 gas water heaters. This is a good choice, a popular model.

Geysers Roda JSD20-A1 is another popular model of this manufacturer. She looks very good. Others available color solutions, not only white body. The apartment will be transformed. There is an electronic display. The cost is pleasantly surprising, and the rating of the best geysers of 2017 without Roda JSD20-A1 would be incomplete. Power of 20 kW, electronic ignition, traction control sensor are just some of the characteristics of this wonderful gas equipment.

Top best gas water heaters should include this model: Zanussi GWH 10 Fonte. This is an excellent example of the well-known quality from the Zanussi company. It has an electronic display, speakers with a pattern on the body are available, white color. They are small and look very nice. The price is acceptable, the operation will not cause problems, because many little things are thought out in advance in the column. These are the convenient location of the handles, the smoothness of the surface, the parameters of the hole that provides access to the igniter, and so on.

The quality of the materials from which the body is made, the details, the reliability of the pattern, the power of 18.5 kW, the heating rate of 10 l / min - all these are Zanussi flow columns GWH 10 Fonte. Rating without it would be untrue, dishonest, unfair. This technique is in demand no matter what, because it has brightness and beauty. An apartment with it will become more comfortable, spacious, especially if a column from the times of the USSR worked before.

Halsen WM 10

The rating continues Halsen WM 10. Feedback from people who decide to buy this model promises success to all buyers. There are practically no shortcomings - it has been tested in practice. The column lasts a long time, and it is easy to manage. Breakdowns are rare, the quality satisfies even the most demanding customers. Top best models it must be enabled.

Each new year of service Halsen WM 10 will confirm the status of the leader. The best flow geysers should be just that. This is an ideal option for an apartment with both a small kitchen and a large one for the home.

Electrolux GWH 265 ERN Nano Plus

Column Electrolux GWH 265 ERN Nano Plus, due to its small size, does not take up much space. But with its design it still attracts attention, it does not hide or hide, it boldly complements the space. She has excellent technical characteristics, which makes her noteworthy buyers. Therefore, it is included in the rating of geysers for apartments, the best, most in demand. The company has been providing residents for many years different countries quality gas equipment. The prices will also pleasantly surprise you. Best Options- not necessarily the most expensive.

Mora Vega 10

The Mora Vega 10 column is modest, it is characterized by restraint and rigor in design. There is no electronic display, but the quality is commendable. The rating would be incomplete without her. This is a great option for a kitchen of any size, with any design. It is easy to use, there is nothing superfluous in it. Mora Vega 10 will appeal to those people who value practicality and quality. This is a slightly conservative option, but reliable.

"Ladogaz" VPG 10E

Stylish column with an electronic display "Ladogaz" VPG 10E - this is water heating up to 85 degrees, a throughput of 10 l / minute, a power of 19 kW and good price. Therefore, she is in demand. This is rational solution, bargain. The column rarely breaks, but even in the case when it is broken, finding the right spare part, original, appropriate, is not a problem. Customers trust this company, it is often recommended, and for good reason. For many years, it is she who will delight others with proper work.

In homes without hot water, gas water heaters come to the rescue. They have many advantages - long service life, economical price of "blue fuel" and the device itself, as well as the ability not to depend on accidents and all kinds of preventive measures. Our rating of the best gas water heaters will introduce you to the most reliable and popular models.

High-quality Czech devices, winners of the rating of reliable gas water heaters, adapted to Russia with frequent pressure drops in pipes. With Mora Vega, you will have hot water at any low pressure. In addition, the semi-automatic column works almost silently. Manufacturers claim that they have a 15% higher water heating rate than similar devices (10 l / min at a pressure of up to 7 l / min).

There are German fittings inside, and special turbulators inside the tubes prevent scale from settling. The thick copper heat exchanger has an additional protective coating.

In terms of safety, this model will not let you down: there is a temperature limiter, “dry start” fuses (it will not turn on without water), flame and traction.

The service life will be at least 12 years, but the price is from 20 thousand rubles.

Good Italian speakers at a price of 13 thousand rubles. Its productivity is 11 l / min, and a copper heat exchanger will heat water up to 60 degrees.

The security system in them is thought out to the smallest detail - the device will work at the weakest pressure, which allows residents of high floors not to worry about whether they will have hot water. There is overheating protection, smoke control and a flow sensor.

Reliable speaker of the latest generation. The design has a built-in electric ignition (via batteries), an automatic sensor for temperature and water changes. It makes very little noise, but you won’t be able to get a thin warm jet - the unit will turn on only with high pressure. Present: draft sensor, hydraulic valve, ionization flame control - which means that you can light the flame quickly and easily.

When overheating, the gas supply is immediately stopped. The heat exchanger in the column is copper. Price from 15000 r.

The disadvantage is that it is designed for normal pressure. As soon as it is lowered, the protection is activated and the device does not work.

A very popular model with piezo ignition, which will work (according to the manufacturer) for at least 15 years. Heat exchanger and burner made of stainless steel, with throughput 10l/min.

The column is compact and silent, with a maximum temperature of 60 degrees. There is a control of the flame and flue gases, protection against overheating. This device has a built-in power regulator and a heat support function when the pressure in the pipeline changes.

Zanussi GWH 10 Fonte

Automatic column classic design, which will fit into the interior of any kitchen or bathroom. It is a quiet device with an economical consumption of water and gas (10 l / min).

Functions: electronic ignition (from 2 batteries), LED-display (with outlet temperature). There are regulators of productivity and heating temperature. The heat exchanger and burner are made of stainless steel.

With the weakest water pressure (0.15 bar), the device will perform all its functions. Zanussi has released a separate series - Fonte Glass, for lovers of original design. In them, the front panel is made of glass with a pattern (7 types).

There is no modulation control. Price - from 10 thousand rubles.

Qualitative reliable machine at a price of 15 thousand rubles with a capacity of up to 14 l / min. It has a built-in modulating burner that independently controls the flow rate and creates the required temperature. Therefore, a person is not waiting for a sudden change warm water cold jet, and you don’t need to look after the burner.

Reliable protection will turn off the column in case of improper operation. The heat exchanger is copper, and indicators on the display will report all malfunctions.

German column that is perfect for small kitchens and especially "Khrushchev", while its productivity is 16 l / min. The piezo ignition is fully automatic and eliminates the need for batteries.

There are three locks: water (at temperatures above 95 degrees), in the absence of traction and flame control.

The service life of a copper heat exchanger is at least 15 years.

Slavic geyser at a price of 9 thousand rubles, assembled in China. It has a modulator that allows you to change modes depending on the water pressure (starting from 0.2 bar). The device is quiet and ignition occurs instantly.

The security system controls the degree of removal of combustion products and automatically turns off the gas if the flame goes out or the draft in the chimney becomes insufficient.

There is a temperature display and a water heating limiter.

Russian water heaters, which are no worse than their foreign counterparts. They will work stably for many years, and in the event of a breakdown, there will be no issue with spare parts and service.

This column shows the water temperature on the display, is not afraid of strong pressure and pressure drops. Electric ignition is carried out using batteries, and a thick copper heat exchanger deserves special praise.

The Neva 4511 also has disadvantages: it is noisy, without smooth modulation of the flame, and the batteries should be changed several times a year.

Price - from 9.5 thousand rubles.

Chinese water heater at a price of 8 thousand rubles. The dispenser has automatic electronic ignition, a low draft lock, a temperature sensor (in the form of a display), which excludes the possibility of overheating, and a winter-summer switch. The heat exchanger is copper (tin-plated), which is very good for a Chinese model.

The column is ideal for apartments with a small (up to 9l / min) and weak pressure water (maximum 4 l/min). The actual service life is from 5 years.

Video - how to choose a geyser