Car painter etc. Legislative base of the Russian Federation

§ 43. Painter 3rd category

Characteristics of works. Painting surfaces requiring a high-quality finish after applying putties and primers with paints and varnishes in several tones, sanding and polishing them. Cutting surfaces for a simple pattern of various types of wood, marble and stone. Application of drawings and inscriptions on stencils in two or three tones; numbers and letters without stencils. Painting parts and surfaces on electrostatic installations and electrostatic paint sprayers. Spray surface finish. Surface treatment with corrosion inhibitors. Regulation of air and paint supply to sprayers. Coating of products with bitumen-based varnishes and nitro-varnishes. Manual cleaning of closed volumes (cylinders, compartments). Painting and cleaning (sanding) of ships at the docks. Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking, distilled and feed water, medical and industrial fat. Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which is not subject to high requirements. Making simple stencils. Cooking adhesives according to a given recipe. Compilation of mixtures of oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels. Selection of color according to given samples. Change and sticking of linoleum, relin and other materials. Adjustment of mechanisms and devices used in the production of painting works.
Must know: the principle of operation and methods of adjustment of mechanisms and devices used in painting work; arrangement of electrostatic field installations and electrostatic paint sprayers, rules for their regulation according to indications of instrumentation; rules for the protection of sheet material and profiled products for ship structures; methods of coloring and varnishing products from various materials and the process of preparing products for finishing; the process of cutting surfaces for a simple pattern of various types of wood, marble and stone; properties of decorative and insulating varnishes and enamels and recipes for their composition; methods of composing paints of various colors and tones; the chemical composition of paints and the rules for selecting colors; methods and methods of gluing, changing linoleum, linkrust and other materials; specifications for finishing and drying products.
Work examples
1. Passenger cars, except for the ZIL and Chaika brands, and buses - applying a primer layer, puttying, sanding, primary and re-painting of the body.
2. Trucks - final painting.
3. Fittings and ship equipment - painting according to the 2nd class of finishing.
4. Barges - coloring.
5. Blocks of regulation - priming and puttying of external surfaces.
6. Block sections, complex foundations, sides inside - mechanized rust removal.
7. Doors, frames - puttying.
8. Vane propellers - priming and painting.
9. Cast and welded parts for electric machines and devices - grinding after puttying and painting.
10. Tanks - varnishing of the inner surface.
11. Contactors ZS-T - painting of the outer surface.
12. Film and camera cassettes - coloring.
13. Welded frames of large-block stations and control panels - painting.
14. Upper and lower propeller housings - priming and painting of external and internal surfaces.
15. Steel gearbox housings and covers - priming and painting of internal surfaces.
16. Cases, tables and disks of adjusting and test benches - grinding and painting with enamel.
17. Vessel hull inside and outside, superstructures - painting.
18. Turbine housings - priming, puttying and painting of external and internal surfaces.
19. Cases of electrical distribution devices - puttying, priming, painting.
20. Cranes, bridges, power transmission towers - painting.
21. Bodies of freight cars, boilers of tanks and steam locomotives, universal containers - painting.
22. Steel oil pipelines - painting of internal surfaces.
23. Machines, machine tools, devices, devices and other equipment - coloring.
24. Ship mechanisms, devices - puttying, painting by hand and mechanized way.
25. Flexible, steel supports - priming and puttying of external surfaces.
26. Decks - applying mastics.
27. Metal and wooden panels for radio devices - painting and finishing.
28. Switches "S" PS-1 steel - priming the outer surface and painting.
29. Facing and shaped tiles - facing of vertical surfaces.
30. Surfaces of ships, wagons - gluing linoleum, linkrust, relin.
31. Surfaces of ship spaces, panels, layouts - sanding on putty and primer, painting with enamels and varnishes.
32. Surfaces of structures and products - painting with installations of the URTs-1 type.
33. Surfaces of structures - application of "Adem" mastic by hand.
34. Ship surfaces, metal, wooden, for insulation in enclosed spaces, the ship's hull from the outside with rubber and fiberglass, complex foundations, shafts, rudders - manual and mechanical painting.
35. Coating "LAK" - gluing and removing stencils.
36. Frames, doors, transoms - painting and varnishing.
37. Welded steel rotors - priming and painting of internal surfaces.
38. Glasses, bushings, seals, small-sized brackets, housings, casings, frames - continuous puttying, grinding, painting according to the 2nd and 3rd class of finish.
39. Counting, sewing and typewriters - dyeing and polishing.
40. Pillars, shields - cutting for a simple drawing of various types of wood.
41. Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives and all-metal cars, cars with machine cooling and isothermal cars with a metal body - grinding, applying a revealing layer with a brush, spray or roller.
42. Reinforced concrete ships - painting.
43. Trolleybuses and subway cars - gluing panels and ceiling, interior with cotton fabric, gluing panels with linkrust, sanding on solid putty, applying the second and third layers of enamel with a brush and paint sprayer.
44. Pipes and metal fittings of locomotives and wagons - painting.
45. Ventilation pipes - painting.
46. ​​Cargo holds - painting on fiberglass with EP enamels.
47. Steel rods - priming and painting of external surfaces.
48. CPC with devices - priming and painting the outer surface.
49. Cases of electrical equipment - varnishing and polishing.
50. Anchor chains - staining.
51. Tanks, compartments, closed volumes - manual cleaning of rust and loose scale, priming and painting.
52. Metal scales - knurling with a roller, pouring engraving in several colors.
53. Electric motors, turbogenerators - final painting.
54. Drawers and cabinets, metal panels of stations and control panels - sanding, painting and finishing.

From July 1, 2016, employers are required to apply professional standards if the qualification requirements that an employee needs to perform a certain job function are established by the Labor Code, federal laws or other regulatory legal acts (Federal Law of May 2, 2015 No. 122-FZ).
To search for approved professional standards of the Ministry of Labor of the Russian Federation, use

Active Edition from 17.04.2009

Document name	"SINGLE TARIFF AND QUALIFICATION DIRECTORY OF WORKS AND PROFESSIONS OF WORKERS. ISSUE 1. SECTION: PROFESSIONS OF WORKERS COMMON TO ALL SECTORS OF THE NATIONAL ECONOMY" (approved by the Decree of the State Committee for Labor of the USSR, the Secretariat of the All-Union Central Council of Trade Unions of 31.01.85 N 31 / 3-30) (ed. from 04/17/2009)
Document type	decree, list
Host body	All-Union Central Council of Trade Unions, State Labor Committee of the USSR
Document Number	31/3-30
Acceptance date	01.01.1970
Revision date	17.04.2009
Date of registration in the Ministry of Justice	01.01.1970
Status	valid
Publication	This document has not been published in this form. (as amended on 01/31/85 - M., "Engineering", 1986)
Navigator	Notes

"SINGLE TARIFF AND QUALIFICATION DIRECTORY OF WORKS AND PROFESSIONS OF WORKERS. ISSUE 1. SECTION: PROFESSIONS OF WORKERS COMMON TO ALL SECTORS OF THE NATIONAL ECONOMY" (approved by the Decree of the State Committee for Labor of the USSR, the Secretariat of the All-Union Central Council of Trade Unions of 31.01.85 N 31 / 3-30) (ed. from 04/17/2009)

§ 167a. Painter

(As amended by the Decree of the USSR State Committee for Labor dated 12/18/90 N 451)

1st category

Characteristics of works. Painting parts in well-adjusted drums, automatic machines by dipping and brushing without puttying and priming. Washing parts with alkalis, water and solvents. Surface degreasing. Coating with drying oil and priming. Grinding of paints and varnishes on manual paint grinders. Filtration of paints and varnishes. Drying of painted products. Washing and cleaning of used tools, brushes, stencils, containers, parts of paint sprayers, airless sprayers, hoses. Receipt and bringing to the workplace of paints and varnishes. Hanging parts, products on special devices and removing them after painting. Drawing up paints, varnishes, mastics, putties, primers, putties according to a given recipe under the guidance of a painter of a higher qualification.

Should know: techniques for painting parts in drums, automatic machines and by dipping; general information about corrosion, scale, protection of wooden surfaces from woodworms and methods of protection against them; name and types of paints, varnishes, enamels, primers, putties, compositions of putty materials; rules for servicing drying chambers and cabinets and drying modes for products; methods of grinding paints by hand; purpose and conditions for the use of painting tools: compositions and methods for washing and cleaning the tools used, brushes of various types, containers and paint sprayers.

Work examples

1. Fittings, insulators - coating with asphalt varnish.

2. Tanks - staining.

3. Forks - staining.

4. Details of machines of a simple configuration - painting.

5. Fences, lattices, gates, protections - coloring.

6. Wrenches, socket and special wrenches, pliers, wire cutters and other tools - staining.

7. Rings and blades of rotors - painting.

8. Coamings, casings, floorings, a set of hull parts, shaft sleeves, pipes, foundations are simple - degreasing.

9. Decks - wiping with solar oil.

10. Transformer plates - varnishing in the drum.

11. Frames, bearing shields and safety welded structures, iron and steel castings for electric machines - cleaning and priming surfaces.

12. Different containers - coloring.

13. Old thermal insulation in ship premises - removal.

14. Anchor chains - painting with coal lacquer by dipping.

Section "Metal plating and painting"

§43. Painter

3rd category

Characteristics of works. Painting surfaces requiring a high-quality finish after applying putties and primers with paints and varnishes in several tones, sanding and polishing them. Cutting surfaces for a simple pattern of various types of wood, marble and stone. Application of drawings and inscriptions on stencils in two or three tones; numbers and letters without stencils. Painting parts and surfaces on electrostatic installations and electrostatic paint sprayers. Spray surface finish. Surface treatment with corrosion inhibitors. Regulation of air and paint supply to sprayers. Coating of products with bitumen-based varnishes and nitro-varnishes. Manual cleaning of closed volumes (cylinders, compartments). Painting and cleaning (sanding) of ships at the docks. Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking, distilled and feed water, medical and industrial fat. Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which is not subject to high requirements. Making simple stencils. Cooking adhesives according to a given recipe. Compilation of mixtures of oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels. Selection of color according to given samples. Change and sticking of linoleum, relin and other materials. Adjustment of mechanisms and devices used in the production of painting works.

Must know: the principle of operation and ways of adjusting the mechanisms and devices used in painting work; arrangement of electrostatic field installations and electrostatic paint sprayers, rules for their regulation according to indications of instrumentation; rules for the protection of sheet material and profiled products for ship structures; methods of coloring and varnishing products from various materials and the process of preparing products for finishing; the process of cutting surfaces for a simple pattern of various types of wood, marble and stone; properties of decorative and insulating varnishes and enamels and recipes for their composition; methods of composing paints of various colors and tones; the chemical composition of paints and the rules for selecting colors; methods and methods of gluing, changing linoleum, linkrust and other materials; specifications for finishing and drying products.

Work examples

1. Passenger cars, except for the ZIL and Chaika brands, and buses - applying a primer layer, puttying, sanding, primary and re-painting of the body.

2. Trucks - final painting.

3. Fittings and ship equipment - painting according to the 2nd class of finishing.

4. Barges - coloring.

5. Blocks of regulation - priming and puttying of external surfaces.

6. Block sections, complex foundations, sides inside - mechanized rust removal.

7. Doors, frames - puttying.

8. Vane propellers - priming and painting.

9. Cast and welded parts for electric machines and devices - grinding after puttying and painting.

10. Tanks - varnishing of the inner surface.

11. Contactors ZS-T - painting of the outer surface.

12. Film and camera cassettes - coloring.

13. Welded frames of large-block stations and control panels - painting.

14. Upper and lower propeller housings - priming and painting of external and internal surfaces.

15. Steel gearbox housings and covers - priming and painting of internal surfaces.

16. Cases, tables and disks of adjusting and test benches - grinding and painting with enamel.

17. Vessel hull inside and outside, superstructures - painting.

18. Turbine housings - priming, puttying and painting of external and internal surfaces.

19. Cases of electrical distribution devices - puttying, priming, painting.

20. Cranes, bridges, power transmission towers - painting.

21. Bodies of freight cars, boilers of tanks and steam locomotives, universal containers - painting.

22. Steel oil pipelines - painting of internal surfaces.

23. Machines, machine tools, devices, devices and other equipment - coloring.

24. Ship mechanisms, devices - puttying, painting by hand and mechanized way.

25. Flexible, steel supports - priming and puttying of external surfaces.

26. Decks - applying mastics.

27. Metal and wooden panels for radio devices - painting and finishing.

28. Switches "S" PS-1 steel - priming the outer surface and painting.

29. Facing and shaped tiles - facing of vertical surfaces.

30. Surfaces of ships, wagons - gluing linoleum, linkrust, relin.

31. Surfaces of ship spaces, panels, layouts - sanding on putty and primer, painting with enamels and varnishes.

32. Surfaces of structures and products - painting with installations of the URTs-1 type.

33. Surfaces of structures - application of "Adem" mastic by hand.

34. Ship surfaces, metal, wooden, for insulation in enclosed spaces, the ship's hull from the outside with rubber and fiberglass, complex foundations, shafts, rudders - manual and mechanical painting.

35. Coating "LAK" - gluing and removing stencils.

36. Frames, doors, transoms - painting and varnishing.

37. Welded steel rotors - priming and painting of internal surfaces.

38. Glasses, bushings, seals, small-sized brackets, housings, casings, frames - continuous puttying, grinding, painting according to the 2nd and 3rd class of finish.

Characteristics of works. High-quality painting of surfaces with various paints with varnishing, polishing, ornamental and artistic multi-color finishes. Cutting surfaces for valuable wood species. High-quality painting after priming by cold airless spraying. Priming, anti-corrosion coating, anti-fouling and anti-fouling, anodic and cathodic protection of ships exposed to sea water, mineral acids and alkalis. Restoration of art inscriptions.

Must know: how to perform painting work with artistic and ornamental finishes and the method of cold airless spraying; the process of cutting surfaces for valuable wood species; formulation, physical and chemical properties of coloring materials and compositions for artistic coloring and finishing; types of complex paintings and fonts; properties and grades of pigments, solvents, oils, varnishes, silicates, resins and other materials used in painting; methods for testing varnishes and paints for durability and viscosity; technical conditions for the final finishing of products, parts and surfaces; modes of drying paint and varnish coatings; requirements for the preparation of surfaces for anti-corrosion, anode and cathodic protection; protective schemes for priming and painting the underwater part of ships exposed to sea water, mineral acids and alkalis; methods of restoration of art inscriptions.

Work examples

1. Passenger cars of the ZIL, "Chaika" brands - final painting, finishing with varnishes and enamel paints.

2. Coats of arms, ornaments, complex inscriptions - artistic execution according to sketches and drawings.

3. Cases of devices for export - painting according to the 1st class of finishing.

4. Cases of instruments operated in sea water, in tropical conditions - painting.

5. Vessel hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by hot air and airless spraying of paints and varnishes.

6. Hull and other metal structures in the underwater part - measurements of the specific transverse resistance of the paintwork with preliminary marking of measurement points.

7. Superstructure of passenger ships - painting.

8. Panels, shields, schemes - artistic surface finishing.

9. Salons of ships, passenger aircraft, tourist and service passenger cars - metal, wood, plastic finishing.

§ 167a. House painter 1st category

Job Description

• Painting parts in well-adjusted drums, automatic machines by dipping and brushing without puttying and priming.
• Washing parts with alkalis, water and solvents.
• Surface degreasing.
• Coating with drying oil and priming.
• Grinding of paints and varnishes on manual paint grinders.
• Filtration of paints and varnishes.
• Drying of painted products.
• Washing and cleaning of used tools, brushes, stencils, containers, parts of paint sprayers, airless sprayers, hoses.
• Receipt and bringing to the workplace of paints and varnishes.
• Hanging parts, products on special devices and removing them after painting.
• Drawing up paints, varnishes, mastics, putties, primers, putties according to a given recipe under the guidance of a painter of a higher qualification.

Must know:

• techniques for painting parts in drums, automatic machines and by dipping;
• general information about corrosion, scale, protection of wooden surfaces from woodworms and methods of protection against them;
• name and types of paints, varnishes, enamels, primers, putties, compositions of putty materials;
• rules for servicing drying chambers and cabinets and drying modes for products;
• methods of grinding paints by hand;
• purpose and conditions for the use of painting tools:
• compositions and methods for washing and cleaning the tools used, brushes of various types, containers and paint sprayers.

Work examples:

• 1. Fittings, insulators - coating with asphalt varnish.
• 2. Tanks - staining.
• 3. Forks - staining.
• 4. Details of machines of a simple configuration - painting.
• 5. Fences, lattices, gates, protections - coloring.
• 6. Wrenches, socket and special wrenches, pliers, wire cutters and other tools - staining.
• 7. Rings and blades of rotors - painting.
• 8. Coamings, casings, floorings, a set of hull parts, shaft sleeves, pipes, foundations are simple - degreasing.
• 9. Decks - wiping with solar oil.
• 10. Transformer plates - varnishing in the drum.
• 11. Frames, bearing shields and safety welded structures, iron and steel castings for electric machines - cleaning and priming surfaces.
• 12. Different containers - coloring.
• 13. Old thermal insulation in ship premises - removal.
• 14. Anchor chains - painting with coal lacquer by dipping.

§ 167b. Painter 2nd category

(The tariff and qualification characteristics are additionally included by the Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Job Description

• Painting surfaces that do not require a high-quality finish after applying putties and primers.
• Preparation of products for varnishing on lacquer putty and for cutting various types of wood, stone and marble for drawing.
• Leveling surfaces with putty with repairing defects.
• Applying numbers, letters and drawings on stencils in one tone.
• Painting parts and products with a spray gun.
• Cleaning, smoothing, lubrication, etching of painted surfaces from corrosion, scale, fouling, old paintwork, dust and other deposits with brushes, scrapers, spatulas and other hand tools, rags, a vacuum cleaner, an air jet from a compressor.
• Drawing up and rubbing paints, varnishes, mastics, putties, primers and putties on paint-grinding machines according to a given recipe.

Must know:

• arrangement of paint machines;
• purpose and conditions for the use of mechanisms, devices and tools used in painting work;
• methods of performing paint and varnish coatings of parts and products from various materials;
• grinding methods;
• grinding materials used for various types of paints and varnishes, and their physical properties;
• recipes for the preparation of paints, varnishes, mastics, putties, putties;
• methods of mixing paints according to a given recipe to obtain the necessary color and determine the quality of the paints and varnishes used;
• storage rules for solvents, paints, varnishes and enamels;
• drying mode of paint and varnish coatings;
• features of cleaning surfaces made of reinforced concrete and fiberglass;
• rules for preparing surfaces for painting;
• requirements for the quality of the surface to be cleaned.

Work examples:

• 1. Walls, floors and other surfaces - cleaning, smoothing, etching.
• 2. Fittings and electrical parts, reinforced insulators, arresters - priming and painting.
• 3. Balloons - staining.
• 4. Waveguides and waveguide sections made of brass and copper - continuous puttying, grinding, painting.
• 5. Bushings for radiator and reduction gears - coating with mastic
• 6. Parts of medium and complex configuration and components of machines, ships and equipment - painting.
• 7. Brackets, sectors, servo housings, transformers - painting.
• 8. Life buoys - puttying and painting.
• 9. Covers, boards, plates - spray painting.
• 10. Roofs, frames, bogies, brake parts, floor boards, battery and fire boxes, locomotive and wagon deflectors - painting.
• 11. Steel structures - cleaning from corrosion.
• 12. Vessel hull inside and outside - surface cleaning.
• 13. Metal beds - staining.
• 14. Columns, trusses, crane beams, molds for reinforced concrete products - painting.
• 15. Hatches, holds, foundations - filling with cement mortar.
• 16. Mining machines, equipment and machine tools - painting after repair, applying stencil inscriptions.
• 17. Panels, cases, casings - staining several times with a spray gun.
• 18. Tractors, rollers, asphalt mixers - body painting.
• 19. Pipes of various diameters - coloring.
• 20. Ventilation pipes - insulation with mastic materials.
• 21. Cabinets, limbs - staining.
• 22. Sheet piles and ridges of freight car skins - priming.
• 23. Electric motors, electric machines, turbogenerators - priming, puttying and painting.
• 24. Metal post boxes - cleaning, priming and painting.
• 25. Boxes and cases of devices - drawing a stencil.

§ 167c. Painter 3rd category

(The tariff and qualification characteristics are additionally included by the Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Job Description

• Painting surfaces that require a high-quality finish, after applying putties and primers with paints and varnishes in several tones, grinding, priming, oiling and polishing them with hand tools.
• Cutting surfaces for a simple pattern of various types of wood, marble and stone.
• Application of drawings and inscriptions on stencils in two or three tones; numbers and letters without stencils.
• Painting parts and surfaces on electrostatic installations and electrostatic paint sprayers.
• Spray surface finish.
• Surface treatment with corrosion inhibitors.
• Regulation of air and paint supply to sprayers.
• Coating of products with bitumen-based varnishes and nitro-varnishes.
• Cleaning of closed volumes (cylinders, compartments).
• Painting and cleaning (sanding) of ships at the docks.
• Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking, distilled and feed water, medical and industrial fat.
• Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which is not subject to high requirements.
• Making simple stencils.
• Compilation of mixtures of oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels.
• Selection of color according to given samples.
• Adjustment of mechanisms and devices used in the production of painting works.

Must know:

• the principle of operation and methods of adjustment of mechanisms and devices used in painting work;
• arrangement of electrostatic field installations and electrostatic paint sprayers, rules for their regulation according to indications of instrumentation;
• rules for the protection of sheet material and profiled products for ship structures;
• methods of painting and varnishing products from various materials and the process of preparing products for finishing;
• the process of cutting surfaces for a simple pattern of various types of wood, marble and stone;
• properties of decorative and insulating varnishes and enamels and recipes for their composition;
• methods of composing paints of various colors and tones;
• the chemical composition of paints and the rules for selecting colors;
• specifications for finishing and drying products.

Work examples:

• 1. Ceilings - cleaning, smoothing, etching.
• 2. Walls, floors and other surfaces - simple painting.
• 3. Passenger cars, except for the ZIL and "Chaika" types, and buses - applying a primer layer, puttying, sanding, primary and re-painting of the body.
• 4. Trucks - final painting.
• 5. Barges - coloring.
• 6. Cast and welded parts for electric machines and devices - grinding after puttying and painting.
• 7. Tanks - varnishing of the inner surface.
• 8. Film and camera cassettes - coloring.
• 9. Welded frames of large-block stations and control panels - painting.
• 10. Cases, tables and disks of adjustment and test stands - grinding and painting with enamel.
• 11. Boat hull inside and outside - painting.
• 12. Cranes, bridges, power transmission towers - painting.
• 13. Bodies of freight cars, boilers of tanks and steam locomotives, universal containers - painting.
• 14. Machines, machine tools, devices, devices and other equipment - coloring.
• 15. Decks - applying mastics.
• 16. Metal and wooden panels for radio devices - painting and finishing.
• 17. Frames, doors, transoms - painting and varnishing.
• 18. Counting, sewing and typewriters - dyeing and polishing.
• 19. Pillars, shields - cutting for a simple drawing of various types of wood.
• 20. Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives and all-metal cars, cars with machine cooling and isothermal cars with a metal body - grinding, applying a revealing layer with a brush, spray or roller.
• 21. Reinforced concrete ships - painting.
• 22. Trolleybuses and subway cars - sanding on solid putty, applying the second and third layers of enamel with a brush and paint sprayer.
• 23. Pipes and metal fittings of locomotives and wagons - painting.
• 24. Ventilation pipes - painting.
• 25. Cases of electrical equipment - varnishing and polishing.
• 26. Anchor chains - coloring.
• 27. Electric motors, electric machines, turbogenerators - final painting.

§ 167 Painter 4th category

(The tariff and qualification characteristics are additionally included by the Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Job Description

• Painting surfaces with dry powders, various paints and varnishes in several tones, grinding, varnishing, polishing, puttying, priming and oiling them with a mechanized tool.
• Trimming and flattening of painted surfaces.
• Stretching panels with shading.
• Drawing drawings on surfaces using stencils in four or more tones.
• Cutting surfaces for a complex pattern of various types of wood, marble and stone.
• Self-compilation of complex colors.
• Restoration of painted surfaces, lincrusta, linoleum and other materials.
• Lacquer coatings for glass and ceramic enamel.
• Production of complex stencils and combs for cutting painted surfaces.
• Painting after priming surfaces by cold airless spraying.
• Coloring of parts, products, devices in tropical design.
• Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship tanks of drinking, distilled and feed water, medical and industrial fat.
• Mechanized cleaning of ship hulls from corrosion, scale, fouling and old paintwork by shot blasting machines with delivery of work according to samples and standards and high pressure water.
• Determination of the quality of applied paints and varnishes.
• Adjustment of mechanisms used in the production of painting works.

Must know:

• device and methods for adjusting mechanisms and devices used in painting work;
• ways to perform painting work with high-quality finishes;
• the process of cutting surfaces for a complex pattern of various types of wood, marble and stone;
• features of mechanized cleaning of surfaces and hulls of ships from fouling and old paintwork;
• technical conditions and requirements for coloring and varnishing;
• methods of restoration of painted surfaces, linkrust, linoleum and other materials.

Work examples:

• 1. Ceilings - improved finishing, painting.
• 2. Walls, floors and other surfaces - high-quality finishing, painting.
• 3. Passenger cars, except for the ZIL, "Chaika" type, and buses - final painting, finishing and polishing.
• 4. Boats - coloring.
• 5. Linen surfaces of aircraft cabins - multi-layer coating with varnishes and paints.
• 6. Walls, shelves, interior and exterior furniture, ceilings and roofs of locomotives, all-metal wagons, machine-cooled wagons and insulated wagons with a metal body and ship cabins - painting and varnishing with a brush, spray or roller.
• 7. Vessels, fuselages, aircraft wings and carriage walls - application of distinctive inscriptions and markings.
• 8. Trolleybuses and subway cars - final painting and finishing.
• 9. Electrical appliances, large-sized electric machines - painting and polishing.

§ 167d. Painter 5th category

(The tariff and qualification characteristics are additionally included by the Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Job Description

• Painting surfaces with various paints with varnishing, polishing, ornamental, artistic multi-color and decorative finishes.
• Cutting surfaces for valuable wood species.
• Painting after priming by cold airless spraying.
• Priming, anti-corrosion coating, anti-fouling and anti-fouling, anodic and cathodic protection of ships exposed to sea water, mineral acids and alkalis.
• Restoration of art inscriptions.

Must know:

• ways to perform painting work with artistic and ornamental finishes and the method of cold airless spraying;
• the process of cutting surfaces for valuable wood species;
• formulation, physical and chemical properties of all kinds of coloring materials and compositions for artistic coloring and finishing;
• types of complex paintings and fonts;
• properties and grades of various pigments, solvents, oils, varnishes, silicates, resins and other materials used in painting;
• methods for testing varnishes and paints for durability and viscosity;
• technical conditions for the final finishing of products, parts and surfaces;
• modes of drying paint and varnish coatings;
• requirements for the preparation of surfaces for anti-corrosion, anode and cathodic protection, protective schemes for priming and painting the underwater part of ships exposed to sea water, mineral acids and alkalis;
• methods of restoration of art inscriptions.

Work examples:

• 1. Walls, ceilings and other surfaces - high-quality painting, multi-color and decorative finishing.
• 2. Passenger cars such as ZIL, "Chaika" - final painting, finishing with varnishes and enamel paints.
• 3. Coats of arms, ornaments, complex inscriptions - artistic execution according to sketches and drawings.
• 4. Superstructures of passenger ships - painting.
• 5. Panels, shields, schemes - artistic surface finishing.

§ 167e. Painter 6th category

(The tariff and qualification characteristics are additionally included by the Decree of the USSR State Labor Committee of December 18, 1990 N 451)

Job Description

• Relief, textured and experimental painting and airbrush finishing of products and surfaces with the introduction of new dyes and synthetic materials.
• Restoration of art paintings and drawings.
• Decorative varnishing, polishing of interior surfaces.
• Painting after priming surfaces by hot airless spraying in plants.
• Application of antifouling thermoplastic paints with machines.
• Protection of antifouling paints with preservative paints according to a special scheme.
• Painting according to drawings and sketches by hand and with gunpowder.
• Ornamental and volume painting.

Must know:

• methods of implementation and requirements for the quality of experimental, embossed and textured painting and airbrush finishing of products and surfaces;
• device and methods for setting up installations for hot airless spraying of paints and varnishes and devices for applying thermoplastic paints;
• antifouling paint schemes;
• methods of restoration of artistic paintings and drawings.

Work examples:

• 1. Walls, ceilings and other surfaces - relief and texture painting, painting according to drawings and sketches.
• 2. Ship structures - application of thick-layer coatings.
• 3. The surfaces of the inner walls of passenger ships, aircraft, wagons - hand-painted according to drawings and sketches.
• 4. Salons, lobbies, "Lux" cabins of passenger ships, aircraft, carriages and pleasure yachts - artistic decoration, protective coating.
• 5. Exhibits of exhibition machines, devices and devices - multi-layer and multi-color painting, varnishing, grinding and polishing.