A simple mouse trap. The best homemade mousetraps and how they are used

Since the owners often have to deal with mice in their home, they accordingly have to take care of their prompt removal. Some people purchase special poisons and mousetraps from specialty stores, and some are ready to make their own hands. In this article, you can learn about how to make a mousetrap with your own hands and some of its advantages.

Many people prefer to use factory-made devices that they buy in stores (glue traps, electrical, mechanical). But in general, the mechanism of operation is very simple, so a do-it-yourself mousetrap is very simple. Enough to have suitable materials to make a quality mousetrap. Some devices can be made using improvised means or material that the owners have already gathered to throw in the trash.

The advantages of this approach include the fact that the production as a whole does not take much time, you can save money if required. a large number of devices. Also, you can independently choose the size of the trap, the principle of operation and other features.

It can also be considered a plus that if the trap breaks after several uses, the owner can always fix it himself or replace it with a new one. For this reason, the question of how to make a mousetrap on your own remains relevant.

Unlike factory-made mousetraps, homemade ones usually do not pose any danger to small children or pets. No hard descent. Also, its operation does not lead to the fact that blood appears, which will scare away other rodents.

Video "How to build a mousetrap from a plastic bottle"

Video instruction for making a simple and effective mousetrap from plastic bottle.

Types of mousetraps and technology for their manufacture

If you are interested in learning how to make a mousetrap with your own hands, this information will reveal some aspects of their creation.

Mousetraps are disposable and reusable.

Usually, plastic bottles are used to make reusable traps. It is desirable that the neck be wide, since through it the mouse falls into the container itself. The plastic bottle is placed vertically or at a slight angle. Then a bait is placed in it, which exudes a strong smell. It could be fresh cheese, smoked sausage, lard, a piece of meat or peanut butter.

Also, the bottle can be placed in a horizontal position, fixing it on a flat surface. Then a small hole is cut out in the base, and the bait is again placed inside. The design feature lies in its simplicity, but if a mouse gets into it, then it will not work out. The smooth surface of the plastic will not allow the rodent to cling to it, and it will constantly slide off, remaining inside.

If you check it every day, you can catch pests more often. Usually no more than 2 mice can get into the bottle. Others will not climb if they understand the danger of this place. Therefore, periodically the mousetrap needs to be checked.

Disposable traps are made from glass bottles. If the mouse got into the neck, then they will not get out again. But getting them is not easy. Therefore, the bottles are broken or thrown away with the victim.

Such traps are good because they do not kill rodents, but lock them in a small space. This is suitable for people who do not want to hurt these animals. Catching them, you can release them into the field or far away from home. But you should definitely inspect the house or apartment for holes through which they could again enter the room.

To make a mousetrap, you can use glass jar. If there is no empty jar, open the can, eat the contents, and then wash it thoroughly.

Take one liter jar, then roll it up with a lid. If you don't want to roll up, then use an adhesive backing to hold the lid in place. Then you will need to carefully cut the lid from the center to the circumference (like a cake), and bend a little corner inward to clear the way for the mouse.

Inside you need to place a piece of some product - lard, meat or cheese. It is important that he smells good, and thereby attracts rodents to him. If the mouse gets into the jar, then it will not be able to get out of there in any way - sharp teeth and the slippery glass surface of the jar will interfere with it.

A homemade trap can be made from an ordinary bucket. A bucket mousetrap is easy to make and has a simple principle. Take an ordinary bucket, make a hole in two places so that a thin steel rod or rod can be passed through them (for example, 4-5 mm in cross section). Then, on this rod, you will need to string a can of sparkling water or something similar.

It is very important that the jar rotates easily around its axis (along the rod). After that, the rod is threaded through the holes in the bucket, and fixed. In a jar you can put something from food, preferably odorous. The trap is ready. The principle of operation is as follows - the mouse wants to eat what is in the jar, and when it gets inside or on it, the jar will turn. Thus, the rodent will fall into the bucket.

A wooden mousetrap can also be made. Is taken wooden block, and then holes are drilled through which pests can crawl through. As a drill, you need to take a special one, it is used to create holes in the boards during the installation of a wooden floor and other structures.

Absolutely any type of wood that is available to you will do. After that, 4 small holes are drilled from above - two at the beginning, and 2 in the center. They should reach the main hole, a thin thread will be pulled through them.

Then you will need 2 pieces of steel wire (the first is 1.5-2 mm in diameter, the second is 0.15-0.2 mm) and a regular spool of thread. The first will become the basis, and the second will fix the first on the bar.

A spring and a bracket will be made from the wire. A thick piece on one side is wound around a round base to make a curl, and the tip itself is fixed on wooden block. The tip is located back side traps (where there is no hole). A small hook is made at the other end.

The threads are threaded through the holes. The central thread is fixed motionless so that the mouse has to gnaw through it, getting to the food, and the outer one hangs freely. Then their ends are fixed on top of a thick wire - the central thread is a knot, and the outer one is a loop on a hook. When the mouse comes for food, it will gnaw through the thread that holds the thick wire spring. Then the loop at the beginning (which is on the hook) of the box will grab the rodent and press it.

Traps with a glue base are made using double sided tape. A box is taken and its bottom is glued with tape. This material does not lose its properties over time. And little mice will not be able to easily get out of the trap. Food with a pronounced smell is placed in the box, and placed in a remote place so as not to frighten away rodents. In a day, you can check, select the mice caught and take them out of the house.

In private homes, mice are a real scourge for owners. To help get rid of uninvited "guests" will help a trap for mice. In search of food and warmth, these rodents climb into outbuildings, cellars and, directly - the kitchens of the houses. Here they quickly put things in order, gnawing through bags and containers with food, rodents not only eat, but spoil cereals, root crops, etc., scattering them and soiling them with their excrement. In addition, all nearby products that are not sealed in sealed containers, as well as nearby things, are saturated with an indestructible mouse smell. Therefore, the destruction of mice in the house is a vital necessity.

We fight with mice in the country on our own

The use of poisoned baits against mice in houses and apartments is undesirable, firstly because children and pets can suffer, and secondly, a poisoned animal can die in a mink inside a wall or under the floor, after which it will feel extremely bad in the room for a very long time. bad smell decaying corpse. Therefore, it is best to deal with rodents with the help of traps. Conventionally, they can be divided into two types:

Humane - in which the caught animals remain alive;
Destructive actions - in which rodents have no chance of surviving.

The stores offer different kinds mousetraps, but they are not always cheap, and the shops themselves are far from always located nearby. But you can easily make do-it-yourself mouse traps from improvised materials. This will not require a lot of time and effort.

Pot trap

Long known and very a simple trap can be made from an inverted cup, an old saucepan, a large tin can or other container. A rod is fixed across the saucepan closer to the bottom along the diameter (a piece of thick wire, a smooth twig or wooden stick). The edge of the saucepan is lifted and supported by a washer installed on the edge (with a large button or coin), to which a strong thread with a wire hook is tied or glued. Previously, the thread is thrown through the rod inside the container and the bait is hung on the hook. Empirically, the length of the thread is selected so that the bait hangs 2-4 cm from the surface. A piece of salted or smoked bacon, a crust of bread is used as bait. The mouse, which has climbed up to feast, pulls the bait, the support slips out from under the edge of the container, and the animal is trapped. In order to remove the caught mice, a piece of plastic or plywood is slipped under the trap, creating a kind of floor, then the mousetrap is taken out away from the house, where the rodents are released into the wild. When manufacturing, it should be taken into account that the container for the mousetrap must be heavy enough so that the mouse cannot turn it over and get out.

You can make the same trap much easier: simply attach the bait inside to the side wall of the container with tape at a height of 4-5 cm from the edge. A mouse that has climbed inside will try to get to the bait, shake the container and the support will fall.

Mice trap from a bottle

In just five minutes, you can make a trap from an empty plastic bottle. A hole 2-3 cm in size is cut out in the bottle next to the neck. A strong cord is tied to the neck, the other end of which is attached to a heavy object on the table so that the bottle, hanging from the table, does not reach the floor. The bait is placed in the bottle closer to the bottom (fried seeds, cake, bread crusts, millet, lard and any other that attracts mice). It remains to put the bottle on the edge so that the upper part with the slot lies on the surface of the table, and the lower part extends beyond its edge. When the mouse, having coveted the bait, climbs into the bottle closer to the bottom, it will knock the trap off the table and the bottle will hang on a string. The animal will remain inside and will not be able to get out of it.

Trap "Abyss"

According to a similar principle, a trap is assembled, which is arranged from any container (jar, high saucepan, plastic bucket), on the edge of which it is necessary to make a kind of ramp from a plank or cardboard. It remains to lay a piece of cardboard, plywood or a regular ruler, so that the edge hangs over the container. The bait is placed on this edge. The mouse, approaching the bait, falls into the container below.

Unlike the previous ones, glue traps do not require much space. They can be placed in secluded places, cracks, inside cabinets. You can purchase a ready-made glue trap, or you can buy special glue from rodents and make mousetraps yourself convenient sizes and in the right quantities. For the manufacture of traps, glue is poured thin layer in shallow trays, low jars or flat boards and pieces of plastic. For the best effect, bait can be placed in the center of the traps. Attracted by the smell, the mice step on the glue and stick. To free the animals, a little sunflower oil is poured onto the surface of the glue, and after a while they themselves get out of the trap.

Spring mousetraps are available in sufficient quantities in stores. The production of such structures requires special materials(springs, steel wire), tools, certain skills and a lot of time. Most of these traps are designed to kill mice. The exception is trap cells.

Nobody likes mice, because these little rodents can cause a lot of harm to a living space. Their teeth are so strong that they can easily gnaw through almost any material. The problem is that they have constantly growing teeth, so they need something to chew on. Otherwise, they would grow into the skull of the animal, leading to its death. People have learned to deal with them in different ways, but the simplest and most effective way is a mousetrap. With your own hands (the photo of the process is presented below), you can make such a device in a matter of minutes.

Advantages of a homemade mousetrap

Of course, many purchase a factory device. But its mechanism is so simple that you can perform it right at home. Moreover, you can use various materials so that in the end a quality mousetrap was created. You can make such a device with your own hands in 5-10 minutes, but it has a lot of advantages compared to the factory model. First, the mechanism will be much cheaper. Secondly, you can choose the most suitable design. Well, and thirdly, if it breaks down, at any time it will be possible to construct a new one.

Types of mousetraps

Handmade mousetraps can be of two types: disposable and reusable. Consider the features of each of them:

Reusable devices are usually made from plastic bottles, wood, and glass jars. The advantage of such traps is obvious - they can be used several times. In addition, the captured mouse will remain alive, since it will enter the cage, but will not be harmed. In order not to kill the poor animal, it can be taken to the forest or released into the field.
Disposable mousetraps are made from glass bottles with a wide neck (from tea). A bait is placed inside: for example, a piece of cheese. A thick thread must be tied to the neck so that it does not break. The other end of the thread is attached to a stable object. If the mouse gets inside the bottle, it will roll down, after which the rodent will remain there. To release the creature into the wild, the mousetrap will have to be broken.

Device manufacturing

DIY mousetraps from a bottle can be made in several ways. This option has a significant advantage - for its manufacture requires a minimum of funds. After all, even if there is no home empty bottle, you can buy soda, and the source material will appear. Consider two ways to create a trap.

Method 1. You need to take a bottle, cut it into two parts, the height of which should be approximately the same. On a half with a flat bottom, sharp petals should be cut out, which should be bent inward. In order for the mouse to get into the cage, you need to put any bait in the mousetrap. Once inside, she can no longer get out.

Method 2. Cut the bottle into 2 parts. Cut off the neck so that the mouse can easily pass through it. The bait should be placed at the bottom. After that, it is necessary to place the upper part in it with the neck down. Thus, a good mousetrap will be made. With your own hands, it is done so that the mouse can easily fall into it. She won't be able to get out of there.

Bucket mousetrap

Many do not know how to make a mousetrap with their own hands from a bucket. But it is done very simply. To do this, take any bucket, in the upper part of which it is necessary to mount a metal rod. In the top view, you should get something like the diameter of a circle. It is necessary to put some kind of vessel (jar or bottle) on it, which must rotate freely. Any bait should be placed on top. When the mouse wants to eat it, it will climb onto the bottle and, spinning, will fall into the bucket. The bucket must be positioned so that the rodent first steps on the neck of the vessel. This will increase the likelihood that it will fall.

Mousetrap from a jar

This is one of the most simple options, because a glass jar is available in almost every home. If the mouse is haunted, and there is no free jar, you can open the cucumbers and eat them. After that, the container should be thoroughly washed, since it is not recommended to work with dirty appliances - a bad mousetrap may result. You can make it with your own hands from a jar. It is done very easily, but such a device will be very effective. To do this, take a jar, and then roll it up with a lid. It must be carefully cut using the technology of cutting the cake. To attract the attention of a small rodent, you can put a small piece of fat on the bottom of the mousetrap. In addition, mice love cheese, wheat, grain, bread. The mouse will be able to climb into the jar, but will not come out again, because sharp cloves will interfere with it. If there is no desire to roll up the jar, you can simply paste over its neck with masking tape and cut it crosswise. When the mouse steps on it, it will fall into the jar.

Any of the selected options is much better than the traps that are sold in stores. After all, after each use, they should be re-configured, and this can be quite harmful to health, since your own fingers can get into the mousetrap.

Not infrequently, such unfriendly neighbors as mice start up in people's houses. Of course, the first thing that comes to mind ordinary person is to get rid of an unwanted guest who harms property and products. Someone will consider it necessary to buy a ready-made mousetrap, because. does not see anything complicated in this, but someone cannot afford it for other reasons.

Benefits of using homemade traps

One of the most attractive advantages of these mousetraps is the price. You can easily acquire such a trap with the help of improvised means, or not as costly as in the case of a store-bought one.

Rodents are quite intelligent creatures, so some of them quickly cut through the chip of ordinary mousetraps and the degree of their danger, even despite the temptation of the bait.

One more advantage can be distinguished - this is humanity, because store mousetraps were originally invented for the complete extermination of pests, because. various toxic substances are added to them.

While home-made ones are much less likely to lead to the death of a rodent. They are safer than store-bought ones, an especially useful advantage if small children or pets live in the house.

Varieties of homemade mousetraps

Can and paper trap

A piece of writing paper is wrapped around the neck of the jar, which must necessarily be wide in order to surely protect the rodent from getting out of the situation, which creates a visual illusion. Above the jar, or rather paper, the selected bait is placed. If the mouse bites on the bait, then it will definitely try to get to it, leaning on the paper with its hind legs, thereby falling into the jar.

Mousetrap from jar and lid

The jar, also with a wide neck, is closed with a tin lid. A hole is cut in the center of this lid so that the mouse can get in. And the teeth that will prevent the mouse from getting out into the wild are bent inside the jar. As a rule, bait is placed at the bottom of the jar. For this mousetrap, it is recommended to choose a special bait, this is necessary so that the smell lures the prey into the jar. Such bait can be smoked sausage, ordinary seeds, as well as wheat grains.

Mousetrap with bucket and plastic bottle

For large-scale catching mice, you can make the following trap. Add water, if desired, if mice are to be killed. For manufacturing, stock up on tools such as a bucket, a long knitting needle, or another hard twig, a plastic bottle and bait, of course, as well as adhesive tape. A needle is inserted along the bottle, in the center of the upper and lower parts. This is done in order to ensure the movement of the bottle without interference. The bottle is in the middle relative to the edges of the spoke. Now you need adhesive tape, which you need to fix the bait around the perimeter of the bottle. Scotch tape should be used in moderation so as not to interrupt the smell of the bait. A needle with a bottle is placed on the edges of the bucket.

If the plans were to catch a lot of mice, then it is worth making holes along the edges of the bucket to thread the edges of the knitting needle so that they do not break the prepared structure. The spoke should rotate freely. Next, a couple of rails are fixed on both sides of the bucket to organize a path for the mouse to the bait bottle.

Mousetrap using gravity

Here again, a plastic bottle comes into use, but by the method of gravity.

Mousetrap with bait in the form of a support

Suitable for any cup, bowl, deep plate. Everything is very simple here, the container is fixed so that it is suspended, for support, a bait is placed under it.

Mousetrap from a plastic bottle

First, the bottle is cut in half into 2/3 parts, as a result, you get the neck of the bottle and the second half of the bottle. Then it all comes together. The smaller half of the bottle is fastened with tape or wire with the neck down into the larger one. For attractiveness, the neck of the bottle is lubricated with oil, the bottom is strewn with seeds or bread crumbs.

Important! due to the light weight, the bottle can easily fall, so it would be more correct to mount it on any of the surfaces.

Bucket mousetrap

This method is also suitable for mass catching mice. A wire is taken, this wire is attached along the bucket, a bottle is put on the wire. The bait is placed on top of the bottle. The path to the bucket can be constructed using a plank so that the mouse can reach the bottle. The bucket is filled halfway with water. Subsequently, the mouse is led to the bait, making its way along the boards to the bottle, which will have to turn over, in a rotating motion.

Mousetrap from a glass jar

The jar is placed on its side Double-sided tape the bait is placed, all this is installed on the bottom of the can. For support, a 5 ruble coin is used, which is placed on the edge. As a result, the mouse should hit the jar, and it will turn over, blocking the exit to the outside. Ready.

Glue mousetraps

To begin with, respectively, glue is purchased that is specially designed for rodents and insects. Next, a cardboard product is taken, other similar stationery is also suitable. Glue is applied in strips.

Wooden mousetrap

In a bar, with parameters 180x100x60 mm, holes are drilled with a diameter of 3 cm and a depth of 6 cm, this is done for an entrance intended for mice. The loop of wire should secure the noose from another wire, which will be smaller than the first. Holes are also drilled to install the springs.

The number of loops, nooses and springs is equal to the number of holes. The rope is taken to fasten the spring ready for action. The bait is placed in the holes. So rodents, trying to get to the bait, hit the rope with their teeth. The rope, in turn, contributes to the reaction of the spring and the noose.

Each method that has been discussed in this article is well suited in its own way for effective catching mice. It remains to make sure that necessary funds and get down to business.

Methods for manufacturing electronic, humane and plastic mousetraps.

Rodents in the country and in own house- not at all cute neighbors, but evil enemies. They are not only capable of destroying feed stocks in the barn, but also cause a lot of inconvenience. Some hungry individuals are able to gnaw on wire insulation, which often provokes a short circuit.

You can fight rodents with the help of improvised means or poisons. It is not recommended to use poison if you have small children or pets in the house. In such cases, a mousetrap that you can make yourself will help you out. Pretty simple and affordable option- a plastic bottle trap.

Materials:

Plastic bottle
stapler or wire
Scissors
Bait

Instructions for making a trap from a plastic bottle:

Take a two-liter bottle and cut it into two parts. Top part, where the neck is, should be half as much as the bottom.
Insert the part with the neck into the other part of the bottle, you should get something similar to a watering can in a glass.
Lubricate the neck sunflower oil. This will enhance the slip. Put food inside the container, that is, at the bottom of the bottle. She will serve as bait.
Re-insert the neck part and attach it with a stapler or wire. This will prevent the neck from slipping inward.
The mouse will be able to squeeze through the slippery neck into the structure, but will not be able to get back out.

There is another option for making a mousetrap from a plastic bottle. In this case, the principle is based on the rotation of this bottle.

Materials:

Scotch
plastic needle
Bait
Bucket
Rail

Instruction:

Take a small plastic bottle and pierce it lengthwise with a needle.
Put the edges of the knitting needle on the bucket. Attach the bait to the bottle with tape.
Place a board on the bucket to make it look like a slide. The mouse will rise to the bait and fall into the bucket due to the rotation of the bottle.

This is also one of the simplest options, but not very humane, since the rodent can no longer get out of the glue and dies. For such a trap, you need to purchase special glue in the store. It's called "Mouse Glue".

Materials:

piece of cardboard

Instructions for using the glue trap:

As a basis, you can choose cardboard or a plastic pallet.
Put a layer of glue on the tray, and put a piece of cheese or something edible in the center.
Place the trap in the center of the house and wait. A hungry mouse will come for a treat and stick to the trap.

The easiest option is a mousetrap from a bucket and a ruler. It is made very simply.

Materials:

Bucket
Ruler
Knitting needle
Bait
Board

Manufacturing instructions:

Take a bucket and fill it a third with water. Lay a knitting needle a little closer to the center of the bucket, and a ruler or a thin wooden rail on it.
Attach the bait to the end of the rail or ruler. Make a path to the bucket from the board. The mouse will climb the board like a bridge and land on the ruler.
As soon as the center of gravity shifts, the ruler will tilt towards the water and the rodent will fall into the bucket.
Loading such a trap is easy. It is enough to put a piece of cheese or something edible on the edge of the ruler.

There are many manufacturing options humane mousetrap. To do this, you can use a glass jar or a plastic bottle. Such traps do not kill the rodent, but leave it unharmed.

Tools:

Plastic bottle
Rope
Nail
Bait

Instruction:

You don't have to cut or craft anything. It is enough to choose the right bottle.
A plastic bottle of juice will come in handy.
Tie a rope to the neck, and connect the other end of the rope to the nail. You can just tie the rope to something heavy.
Now put the bait inside the container and put the bottle in an unstable position. The mouse will fit into the bottle, and when it gets to the bait, the center of gravity will shift and the container will fall.
Since the bottle is on a rope, it will remain hanging. You will be able to release the mouse into the street and not kill it.

Do-it-yourself electronic mousetrap: diagram, instructions for use

The principle of operation of such a mousetrap is quite simple. The mousetrap has a motion sensor. As soon as it works, a low current discharge is applied and the animal is killed. Craft similar device people who know a little about electronics will be able to. Instructions for making an electronic mousetrap can be found in the video. Some electronic circuits for collecting mousetraps are presented below. VIDEO: How to make an electronic mousetrap?