Wood saw - rating of the best models. Hand saw for wood: varieties, which one is better to choose Which saw is better to cut trees

Regardless of development technical means and power tools, the need for a simple and trouble-free hand tool doesn't disappear. In some cases, this is the only help in the work. Sawing a board or beam, a metal bar or pvc pipe, all this is "too tough" for a hand saw. The variety of applications for hand saws is great. There are hacksaws “sharpened” for a foam block, there are for woodworking, others saw metal or plastic with PVC.

The quality and design of the saws determine how much effort a person will have to make to complete the job. Will the hands remain intact or will they be covered with painful calluses. Manufacturers carefully address these issues, improving the quality and reliability of their tools.

We have compiled a list of the best hacksaws based on expert opinions experts and reviews of real buyers. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors in the global technology market, but we have selected the best manufacturers and we recommend paying special attention to them:

KRAFTOOL
Stanley
Fiskars

For wood For metal Type: standard Type: garden Type: beam Type: pass-through On concrete On plastic

* Prices are valid at the time of publication and are subject to change without notice.

Hacksaws: For wood

On wood / Type: standard

Main advantages

Hand saw, part of the BLITZ series of tools, for longitudinal and transverse sawing of medium and large-sized parts from various types of wood
Straight hardened teeth with double-sided sharpening (S - RS) provide high-quality and high-speed sawing of parts in both directions
Ergonomic closed handle made of impact-resistant plastic, resistant to mechanical damage, provides a secure grip and comfortable holding during operation
The blade is made of high quality tool steel that can withstand long-term loads.
Light weight (only 370 g) does not overload the brush and allows you to work for a long time

On wood / Type: standard

Main advantages

Hacksaw with proprietary Appliflon coating that reduces friction, increases speed and protects the blade from corrosion
The 7 TPI (7pcs per inch) saw teeth do a good job of rip and cross section wood
Specially shaped Jet-Cut tooth design with three cutting edges for easier sawing and reduced cutting time
Saw blade 1 mm thick. This adds rigidity to the cutting plane and improves the accuracy of work.
The ergonomic composite handle is made of three components - aluminum, ABS plastic and thermoplastic rubber. This combination provides reliability, lightness, resistance to corrosion and a comfortable grip on the tool.

On wood / Type: standard

Main advantages

Hand saw for woodworking with steel blade sanded and lacquered, protected against corrosion
Jet-Cut saw teeth are hardened for quality cuts, and combined with a special blade coating that reduces friction, high speed work
cutting edge with triangular teeth and 8 TPI pitch (8 pieces per inch) for increased cutting accuracy
The handle of the saw is plastic with a rubberized grip zone, fits comfortably in the hand and allows you to securely hold the tool
Three bolts with self-locking nuts are responsible for fastening the handle to the canvas, which increases the reliability and safety of use.

Show all products in the category "On wood"

Hacksaws: For metal

For metal / Type: bow

Main advantages

Bow saw for metal work, with a rigid steel frame traditional design
The handle of the hacksaw is made of plastic with a corrugated surface to ensure a secure grip when working
The position of the blade can be adjusted in four positions, making it possible, depending on the need, to cut metal in horizontal and vertical planes.
The conventional wing screw tension mechanism provides secure fastening and working (stretched) position of the blade for efficient and safe cutting of metal
The size of the cutting surface provides high-quality sawing with a maximum length of up to 95 mm

Show all products in category "For metal"

Hacksaw: Type: standard

For concrete / Type: standard

Main advantages

The hacksaw is intended for sawing foam concrete or similar building material
Every second tooth of the blade is equipped with carbide tipped to increase wear resistance and cut quality of the material.
The tool cuts foam concrete in the longitudinal and transverse directions with the same quality, which increases the convenience and efficiency of use.
The 630 mm long blade is able to cope with fairly wide surfaces in one cut.
Comfortable D-shaped wooden handle provides a good grip and secure holding of the tool during work

Show all products in category "Type: Standard"

Hacksaw: Type: garden

On wood / Type: garden

Main advantages

Garden hacksaw for working with fresh wood, with a retractable blade. Recommended as an addition to Fiskars axes
Thanks to the design of the cutting surface with double teeth, it effectively cuts through any wood using a reverse forward motion.
SoftGrip saw handle provides a secure grip and hold of the tool during operation, and when folded protects the blade from damage
Serrated protrusion on the front of the handle, reliably protects fingers from slipping and increases safety of use
A clip is provided for attaching the tool to a belt. In the working position, it hides in the handle and does not interfere during operation.

A hacksaw is a must-have tool in almost any home. Sawing various parts of wood or processing garden trees- this is a common thing, so it is quite difficult to do without a special tool. To choose a good and high-quality product, first of all, you need to figure out how to choose the right hacksaw for wood. This tool has a lot of varieties that differ in some details and build quality.

Despite the simplicity of the device of hacksaws for wood materials, in the matter of their choice you need to be savvy and have necessary knowledge. Otherwise, there is a chance of acquiring an uncomfortable or low-quality tool. In addition, it should be remembered that hacksaws can be sold unsharpened. In other words, you won't be able to get to work immediately after purchase. Below we discuss how to choose a hacksaw for sawing wood materials with a description of all the nuances that you should pay attention to when choosing products.

Basic characteristics of the tool

First of all, it is worth looking closely at the tool, focusing on its main part - the canvas. From the quality of the metal, its production and correct sharpening comfort during operation and durability of the device depend. When choosing a quality product, you need to focus on 4 main factors:

canvas size;
tooth size;
type of metal;
pen shape.

Of paramount importance is the size of the canvas. Its length is selected based on the purpose of the application. For narrow rails wooden skirting boards and boards, a saw is suitable, the length of which is from 25 to 30 cm. If you decide to build any building on your own, it is advisable to select a hacksaw from 45 to 50 cm.

The main criterion for choosing the length of the canvas is the diameter of the tree to be processed. The size of the hacksaw should exceed it at least 2 times. You can purchase a tool of a slightly shorter length, but this may cause problems during operation. The main difficulty will create a jamming of the blade inside the wood, since the teeth will not be released during the cut to drop the sawdust. The second reason is the lack of comfort. In other words, you will spend much more physical strength for sawing, because the muscles will tighten more from sweeping body movements.

The size of the teeth and their sharpness affect the performance and accuracy of sawing. When choosing a tool, you need to take into account that the smaller teeth are designed for high-precision sawing, but they have some performance limitations. With large teeth, sawing is not as accurate in favor of high-speed work, that is, you will spend less energy on sawing.

This property is marked on the tools as TPI (total number of teeth per 1 inch). The accuracy of sawing depends on the value of this indicator. For example, when working with boards such as chipboard / fiberboard, you should use a hacksaw with a TPI of 7-9. This will allow you to cut the material neatly without crushing its surface.

If the tool is purchased for sawing trees, then there are no requirements for the accuracy of the work. In this case, the main criterion is the performance of the tool, so the most suitable option there will be a saw with a TPI from 3 to 6, where the interval between the teeth is 4-8 mm.

Preparing a hacksaw for work: a - tooth setting; b - sharpening.

Standard teeth on hacksaw blades are triangular in shape. Most of these teeth can be sharpened from time to time. Modern tools have trapezium-shaped teeth. In the process of their production, the slope is made for high strength and wear resistance. Such a saw cannot be sharpened, since it is quite difficult to give the teeth the necessary shape during processing. In addition, the high-strength metal from which they are made is difficult to grind. Therefore, after the end of the life of the hacksaw, you will have to buy a new tool or change the blade.

The metal used for saws also has its own value. The classic hardness of steel for sawing trees is 45 HRC. For teeth, metal with a hardness of 55 to 60 HRC is used. Such tools simultaneously combine wear-resistant teeth and a flexible base. Hacksaws with inherent characteristics are easily identified visually because the blade has a lighter shade in relation to the teeth. Most of these saws cannot be sharpened. The only exceptions are models with teeth that have not been hardened.

Last but not least, attention should be paid to the handle, since only the convenience of using the tool depends on it. Handles are either flip or standard. In the first case, it is possible to replace the worn blade.

Back to index

How to choose the right wood saw?

First you need to figure out for what purposes the hacksaw will be used: in carpentry or carpentry. In the first case, the tool produces high-precision sawing and is used for dry wood. The speed of work in carpentry is not as important as accuracy.

The length of the blade is selected based on the purpose of use, that is, the size of the wood for sawing. For passive use, it is better to choose a hacksaw with hardened teeth, as it will often be idle. Thanks to long term service of such saws, you will not need to sharpen them, which in itself is a laborious process.

The quality of the product is easily determined in the process of its acquisition.

You need to take a tool and first of all evaluate the uniformity of the canvas. After that, it is necessary to bend it by about 30-45 ° and release it. Do this carefully, as low-quality material can be broken. Then evaluate the uniformity again. If a slight deviation appears at the bend point, the metal of the product is of poor quality.

Tool teeth have 2 tasks:

sawing a tree;
remove sawdust.

If the arrangement of the teeth on the blade is rare, the productivity of the tool increases, and the sawdust does not clog the processing site. Saws with a TPI rating of up to 7 are considered high-speed and comfortable to use. However, their disadvantage is the low accuracy of sawing.

Therefore, you need to focus on your own needs and look for a ratio of indicators that suits you. The best option for all types of work, it is selected as follows: the minimum diameter of the processed wood must have a size exceeding the segment in which 3 teeth are located. Otherwise, it will complicate the sawing process, and you will quickly get tired.

Sawing tools can cut both lengthwise and across. The teeth of a saw designed for cutting along have a slight slope. She cuts the wood with a movement away from herself. The size of a standard tool is no more than 50 cm, the angle of the teeth is always sharp. Crosscut saws are much more common, they can be found in any construction stores in a wide range. Their teeth are sharpened in both planes. This allows you to cut wood in and out.

When choosing a tool for sawing wood, its cost is important. A standard pattern applies here: expensive and branded models have high quality unlike fakes from China. If you need a hacksaw for a one-time job, buying a branded model is not necessary. But for long-term operation, it is recommended to look at quality hardened steel products.

As a rule, good products are made from high quality steel, which is processed using advanced technological solutions. It takes into account many little things, ranging from the shape of the teeth and ending with the interval between them.

It is very difficult to manage on a private plot or cottage without hand saw on wood. This tool also has the name "hacksaw". With such a simple device, you can cut trees or branches in the garden, shorten fences and perform many more types of work where you need to change the length of some wooden product: boards, laminate and so on.

It is unlikely that anyone seriously thought about this, but if you make the right choice of saw, then its service life will depend on this, as well as the convenience of work and the quality of the cut. That is why it is necessary to know all the basic parameters for right choice such a carpentry tool.

Choosing a saw

Markets and shops have big variety hacksaw for wood. They all differ in several parameters:

the shape and size of the teeth;
canvas size;
steel grade from which the canvas is made;
handle shape.

If one of the specified parameters changes, then the hacksaw will also radically change its original characteristics. All these factors must be considered when buying a tool for different cases. Also, you should always make sure that the saw sat very well in the hand of the master, because it will greatly facilitate the work. You should not buy a tool with a small handle for a person who has big hands. Such a hacksaw will be very inconvenient to use, and therefore the quality of the cut will suffer.

Tooth size

This parameter will greatly affect the speed of work, as well as quality. To make it convenient to determine the size and number of teeth, the designation TPI was specially introduced, which should indicate the number of teeth in one inch. Such a parameter can always be found in the description of the tool, and this value is also very often drawn directly on the canvas.

Hacksaw for wood with a large tooth will provide a rough cut, as well as high speed. This parameter will be needed for sawing large boards, firewood and branches. The TPI of such an instrument is 3…6.
If there is a need to make a neat and even cut , then you need to buy a saw with fine teeth - T PI 7 ... 9. Such a hacksaw is ideal for sawing chipboard, fiberboard, laminate. But it is worth noting that the performance will be much less than that of a coarse-toothed hacksaw.

The joiner's saw is selected according to the size of the teeth. For processing ordinary tree you can buy large or small, and for delicate materials such as fiberboard, it is better to purchase a fine-toothed saw. There are several designations in stores: for drywall, for wood, and so on. The difference lies in the same size of the teeth. For each material, the optimal size will be selected.

The teeth can also differ in their shape, and this will affect the purpose of the tool:

For ripping teeth are made triangular with oblique corners. Appearance they will resemble hooks that are sharpened from 2 sides. Such a saw will slide along the grain of the wood and make a very smooth cut, leaving no nicks.
For cross cutting teeth are made in the form of an isosceles triangle. This type of hacksaw cuts when passing back and forth, but it is advisable to use it only on dry wood.
Sometimes it is necessary to use a mixed type of sawing, and for this option, two types of cloves are ideal, which are alternately located one after the other. Long curved ones will cut materials in the forward direction, and triangles, when moving backwards, expand the channel and cling to sawdust and chips.

Steel

No one wants a saw to fail after just a few uses, so it is advisable to choose the most high grades become. Teeth can be regular or hardened. Ordinary ones are sharpened at home.

Hard-tooth saws are disposable, because when they wear out, nothing can be done with them on their own. This type is very easy to find dark color. It is advisable to choose a saw that is made of stainless steel, as it can often be very damp in garages, and therefore the saw will become covered with unnecessary corrosion. And there are often situations when work is carried out on the street, but after use the saw is forgotten on the site, then it rains, after which the tool also becomes rusty.

Blade length

This parameter will be determined by the pitch of the teeth and the size of the saw.

Small hacksaws are equipped with small and frequent teeth, the length of the blade will not exceed 350 mm.
Universal hacksaws are available with an average tooth size, and the length of the entire tool is no more than 550 mm.
On a wide hacksaw there are large teeth and increased pitch, the length of the canvas is usually not more than 600 mm.

The canvas can vary not only in length, but also in shape. A traditional saw is usually tapered on one side of the rectangle. This indicates that you have purchased a universal tool that can be used for sawing. various items. The rounded blade is usually used to cut branches or other objects from a distance. Such a hacksaw is very light and glides on wood with high quality, without delivering special trouble owner.

Lever

Thanks to the handle, the convenience of carrying out any work is carried out. The tool should fit perfectly in the hand, and also be very comfortable. To make the handle, different plastics are used, which will be pleasant to the touch. When choosing, make sure that material will not slip if your hand gets sweaty while working. It is for this purpose that special grooves and recesses are made in the handle, as well as rubberized lining. It is these parameters that all manufacturers take into account, and therefore produce products that differ in a wide variety of handles.

Varieties

In modern shops and markets there is a huge variety of saws for any purpose. Therefore, in order to understand which tool is useful for you, you must first familiarize yourself with all their types.

Choice by purpose

As already found out, there is a wide variety of saws, but the choice of a hacksaw should also be carried out in accordance with certain types of work:

For rip sawing, a swing saw must be used.
Transverse will cope well with wood, where there is a transverse arrangement of fibers.
Spike can cut various grooves and spikes, as well as technological recesses in the tree.
Vyruzhnaya cuts holes of various shapes.
Folding hacksaw is used on trees.

The choice should always be made according to the main purpose for which a certain tool is purchased. For household a saw with interchangeable blades is suitable, and it is also desirable to have several types of cutting tools at home.

It is very difficult to master all the information and choose exactly the saw that is suitable for specific situation. That is why it is advisable to study a few more tips that will help you choose the right hacksaw.

What is the best wood saw? You should not ask such a question, because each tool is useful for a specific situation. Therefore, you need to know how to choose a hacksaw for wood, depending on the purpose. Adhering to these simple rules, you can easily find the right tool that is right for you.

Almost everyone has home master there is an electric saw in the working suitcase. But sometimes it is necessary to saw off a part or do some woodwork, for which there is absolutely no desire to unfold the device from a suitcase. And in this case, it would be nice to get a hacksaw for wood. Its manual version will be a great helper if necessary. Consider in more detail the question of how to choose a hacksaw for wood!

Characteristics of a hand saw for wood

In this tool, there are many differences, such as: the size of the blades, steel grades, the shape of the teeth, as well as the design of the handle itself. Let's consider each of them in more detail.

What should be the blade of a hacksaw for wood

This element is the main parameter of the hacksaw. And the main thing in it is its length. Depending on it, the tool can be used for different purposes. There is one caveat, which is that the longer the canvas, the more springy the tool. This complicates the process of wood carving, especially if you need to work with maple, oak, ash.

A length of 25-30 cm is quite suitable if it is necessary to cut small elements of beams, slats, skirting boards. If it is necessary to carry out more serious types of work, then a hacksaw should be chosen with a blade of 45-50 cm.

The basic rule when choosing the length of the web is that it should be twice as long as the elements to be processed, otherwise it will be more difficult to work. Standard sizes the width of the canvases is up to twenty centimeters. Too narrow models will quickly fail, while wide models are completely inconvenient to work with.

Hacksaws are made from alloyed tool steel, which contains a lot of carbon and silicon. The standard option for the hardness of the material is 45 HRC, but for work it is still worth choosing a hardness with an indicator of 55-60 HRC.

Characteristics of hacksaw teeth

It is the size of the teeth that is the most important indicator. Their number per 1 inch shows TPI, which determines the accuracy of the sawing process. In addition, these parameters are interconnected:

If the blade has large teeth, then the speed is high enough, but the saw cut is sloppy.

If the teeth are small, the speed of work is also low, but the cut is accurate and very accurate.

When faced with the question of which hacksaw to choose, focus on a TPI of 3-6 for gardening, or 7-9 for chipboard work.

The teeth of a hacksaw can be ordinary or hardened. If the tool is used in living conditions, hardened teeth will not become dull for a very long time. But when it becomes dull, it will no longer be possible to sharpen it, and the tool will have to be thrown away.

Ordinary teeth can be sharpened with a file marked with an accident.

There are 3 types of hacksaws, depending on which teeth are used:

To saw in a longitudinal way

Cutting in a transverse way

Mixed sawing

If you use a modern hacksaw, in which the teeth are trapezoidal, the canvas can be created durable and wear-resistant. But it is very difficult to sharpen it, which means that the life of such a product is much less.

How to choose a hacksaw? Types and purposes

Narrow saw blade

Saw small sizes, narrow shape, very effective when cutting raw wood. Wet chips come out very easily through the gaps of the teeth, so that the movement of the saw is not hindered.

During the manufacture of saws of narrow shapes, their blades have triangular double-sided teeth. The only disadvantage of this tool is its ability to deviate from the desired direction.

It can have absolutely any teeth, as well as a complete set of interchangeable blades.

Despite everything, these types of saws are best used in the furniture manufacturing process.

Saws in which there is a backing equipment can be said to have stiffeners. But when using hacksaws and increasing the rigidity of the materials being processed, they can bend. That is why the butt is so important. Its main task is to prevent the passage cutting blade deep into the wood, for which he controls the depth of the cut with the saw so that it is not wider than the blade itself.

Such devices are already more bulky. To some extent, they resemble a jigsaw.

To begin with, it is worth deciding on the purpose of using the tool, as well as the frequency of its use. Decide how uniform the blade should be, and of course, how much you are willing to "accept" and buy a hand saw.

Handles are ordinary, plastic. And the presence of a rubberized insert will protect the hands of the master from the formation of corns in the process of woodcarving manual option hacksaws.

The saw is one of the oldest tools used by man. Today's variety strikes the imagination of the buyer.

However, when buying an instrument, you want to get one, and if possible, a universal copy. AT regular store, you can at least hold the tool in your hands, feel the cutting part (the vast majority of the tool, fortunately, are sold ready-to-use - that is, the teeth are sharpened and set apart).

Taking a hacksaw in your hands, you can appreciate the convenience of the handle. However, it is unlikely that you will be offered a "test drive" - that is, you will not be able to try out the tool in practice.

When buying a product in an online store, you can only navigate by photos, descriptions and reviews. This makes it even more difficult to choose a hacksaw for wood. In the article we will talk about the features of the tool, and help you make the right choice.

Existing types of hacksaws

To understand what kind of wood saw better fit just for you, consider its device and types

With the design, everything is simple - the tool consists of a cutting blade and a handle. Moreover, these two elements can be connected rigidly or articulated, change the angle of connection or even form a folding mechanism.