Sofa designs. New and traditional sofa folding mechanisms

The variety of sofas in furniture stores amazes consumers with its wide range. Here you can choose products of various shapes, dimensions, types of transformation, designs, materials of manufacture. Each model has its own advantages and is suitable for a certain interior of the room. Consider the main types of sofa transformation mechanisms (photos with names are attached) and their folding options, as well as the pros and cons of each of the methods.

What are the mechanisms for folding sofas, types

When choosing a sofa, attention is drawn to the durability, practicality, ease of use of the model, and the size of the bed. According to the type of transformation mechanism, they are divided into the following types:

• folding;
• withdrawable;
• rotary;
• without folding mechanism.

Video: Mechanisms for transforming sofas and how to lay them out

folding

Folding models are quite convenient to use. To make a spacious bed out of a compact sofa, you will need to spend a few seconds of free time.

Folding sofas include:

Accordion

When folded, it occupies a minimum of free space, when unfolded, it provides a spacious sleeping place. As a rule, the bedding storage compartment is located in a niche under the sofa. Its advantages include: the durability of the folding mechanism, stability and reliability, ease of transformation. Cons: since with this method the sofa unfolds forward, then there should be enough space in front for its transformation.

Dolphin

The most popular corner sofa that unfolds by pulling the loop under the seat towards you. When unfolded, it pleases consumers with a spacious bed and an additional drawer for linen. Its advantages include: the presence of a comfortable and spacious bed, ease of unfolding, aesthetic appearance.

The Dolphin mechanism exerts a heavy load on the body of the product. Therefore, it is necessary to choose products from high-quality and durable materials.

Book

When unfolding a piece of furniture, its back leans back. To do this, you do not need to move the product away from the wall, as it is immediately installed with a small margin. Book models consist of a metal or wooden frame, spring blocks or any other filler. At the bottom, they are often equipped with linen drawers. Its advantages include: strength and reliability, wear resistance ease of use.

Eurobook

It belongs to the classic models, in which, when unfolding, the seat is pushed forward, and the back is lowered in its place. Its positive qualities include: ease of unfolding and folding, reliability of the mechanism, a large bed, the presence of a niche for storing things.

Click Clack (Tango)

Refers to an improved model of a sofa-book. The product got its name because of the sounds that are made when the mechanism is unfolded.

The model has three positions: lying, sitting and reclining (relaxation).

Some products are additionally equipped with side parts that transform into armrests and headrests. Even when unfolded, upholstered furniture occupies a minimum of free space and is perfectly placed in small apartments.

Tick-tock (pantograph)

Its transformation system resembles a eurobook, only there are no roll-out rollers. Inside there is a spacious box for bedding. To unfold the Pantograph, it is necessary to pull the seat up, grabbing it by the edge in the middle. The advantages include: ease of use, the presence of a spacious bed, the absence of rollers that spoil the floor covering.

French cot (aka Spartacus)

It consists of three sections, which are laid out by pulling the product over the edge of the seat. The French folding bed model is not intended for regular unfolding, as its mechanism wears out quickly. When assembled, the sofa takes up little space.

Sedaflex (American folding bed)

It unfolds like a French folding bed, but differs not in three, but only in two sections and a thicker mattress. Among the advantages it is worth noting: the strength of the transformation mechanism, compactness, the presence of a comfortable and high-quality mattress.

Italian cot

The advantages of the model include the fact that for its unfolding there is no need to first remove the pillows. This option is one of the most reliable and easy to use.

puma

The design of the piece of furniture is original, simple and easy to use. When unfolding, the front part rises, is carried forward and mounted on supports. The rest of the product fits into the vacated space. The special synchronization of the system and the high reliability of the transformation mechanism make it possible to use the piece of furniture on a daily basis. It is worth adding to the advantages: compactness, ergonomics and original design.

Saber

Quite an easy-to-use type of construction that can be fully or partially unfolded. Features include the presence of a linen box and a high place to sleep. Depending on the chosen modification, the bed consists of two or three sections. To unfold the product, you need to roll out the seat, fold the backrest forward and lower the additional shelf.

Butterfly

Video: Sofa with Butterfly transformation mechanism (Butterfly)

With withdrawable mechanism

In roll-out models, one or two sections of the sofa are hidden in its body. To unfold the product, you need to pull the bottom part towards you.

Common models include:

• Venice. The principle of operation of this withdrawable mechanism (see photo above) resembles the Dolphin model. To prepare a sleeping place, it is necessary to push the section, which is located under the seat of the sofa, all the way towards you. After that, the pillow that hides inside will lean back into the vacant niche. The piece of furniture is quite simple and easy to use. Manufacturers offer straight or angular models that do not take up much free space;
• Telescope. To unfold it, you need to pull its lower part towards you. In this case, the sections will roll out one after another and stand on their legs. The advantages include: a sleeping height that is comfortable for sleeping, the reliability of the mechanism, the possibility of regular use, compact volumes, the presence of a box for linen. But keep in mind, due to the unique unfolding system, the product is quite heavy in weight.

with swivel mechanism

A feature of models with swivel mechanisms can be called the ease of unfolding - folding. In them, the entire load goes to the frame, they do not need to lift the blocks and roll out the sections to the stop. Depending on the chosen model, both one part of the sofa and each individual block can turn when unfolding.
A popular model of a sofa with a swivel mechanism is:

• Scissors. Its transformation mechanism is to rotate one section to another. At the same time, the blocks are securely fixed to each other with a metal fastener from below. When transforming sections, a bed with bedside tables is obtained.

Without folding mechanism

These pieces of furniture do not contain any transformation mechanisms. That is, they do not fold out and are intended only to create comfortable seats. Such options are a practical decoration of the living room, where guests will comfortably accommodate. Also, non-folding sofas are found in the interiors of hallways, kitchens and dining rooms. Their benefits include:

• lack of a transformation mechanism (hence, nothing can break in them);
• long service life;
• stylish and aesthetic appearance.

Some people use sofas without transformation mechanisms for sleeping. It will comfortably accommodate one average person.

Mechanisms for transforming corner sofas

Corner sofa models are considered practical, functional and roomy. They are a real find for small apartments. Since they are distinguished by a large number of seats and a spacious sleeping bed. They are installed in the corner of the room (left or right) and occupy a minimum of free space.

Almost all transformation mechanisms are suitable for daily use of corner models. The Dolphin is considered an ideal option, as well as the Scissors model, which unfolds in several movements, and even a child can cope with this matter.

Which sofa mechanism is better

Since all sofa transformation mechanisms differ significantly from each other, the question arises before consumers: which sofa mechanism is better. Here it is worth starting not only from personal wishes and financial possibilities, but also from the purpose of the piece of furniture.

For daily use

For daily sleep, it is better to choose the following types of folding sofa mechanisms: accordion, eurobook, tick-tock, puma, dolphin. An excellent solution for every day would be a rotary or withdrawable mechanism.

If the product is bought for the purpose of regular operation, first of all, attention is paid to its design and the quality of the frame, which will be subjected to maximum load.

When choosing a sofa, it is important to consider the type of its filler. He might be:

• spring. In such a product, twisted springs are located inside in a vertical position. They, in turn, are divided into dependent and independent. The second option is more reliable, since such a filler does not bend, and during rest the spine is maintained in the correct position;
• springless. Differs in orthopedic effect, safety and convenience in use. Such products guarantee a sound and healthy sleep.

When choosing a sofa for daily use, you should pay attention not only to its folding mechanism and how it works, but also to the degree of mattress rigidity, upholstery quality, and the ability to change covers.

As a guest option

Compact models are used as guest sofas, which are laid out from case to case. Quite often, they are equipped with not very strong unfolding mechanisms (for example, a French folding bed), and it is not always comfortable to sleep on them. In these products, the main emphasis is on the spaciousness and convenience of seats, and the function of the bed in them is secondary.

Which sofa mechanism is the most reliable

Most people say that the most convenient and reliable transformation systems are: roll-out, as well as straight and angular models that use such a type of layout as an accordion or a telescope.

When choosing a transformation mechanism, several factors should be considered:

• how much space does upholstered furniture take when folded and unfolded;
• purpose of furniture (for daily sleep or as a guest option);
• intensive load mode;
• ease of operation;
• frame quality.

A good product will:

• have an impeccable movement of the mechanism without any jamming when folding and unfolding;
• differ in high-quality assembly;
• lined with wear-resistant upholstery;
• resistant to high mechanical loads;
• differ in a strong and reliable frame.

In conclusion, it is worth noting that the quality of the sofa transformation mechanism directly affects its durability, practicality and ease of use. It is better to give preference to proven and well-established manufacturers with an impeccable reputation. Then the newly acquired furniture will please you with high technical characteristics, aesthetics and functionality.

A cozy living room is rarely complete without upholstered furniture. To choose a product that will bring comfort and warmth, you need to know what types of sofas exist. After all, they play an important role and are a place not only for relaxation, but also for playing with children or talking with guests. Basically, the differences are in the principle of unfolding sofas, the structure and color of the upholstery and in their design.

A cozy living room is rarely complete without upholstered furniture.

Currently, a huge number of designs and types of upholstered furniture has been developed and presented for sale. In such a variety, it is difficult for people to figure out which ones are better and decide on the choice of a sofa that is right for them. Often, buyers are based on the appearance and upholstery material of the purchased piece of furniture. But these indicators are important only when it is used infrequently. If you put a beautiful leather model in your office or living room as an additional element of the interior. For the same purposes, there are monolithic sofas, that is, non-folding ones, they can often be seen in public places.

But it is a completely different matter if the purchase of a sofa is made for use for every day and preferably not for 1 year. Usually in this case it is assumed that he will be laid out daily for sleep. In order not to make a mistake with the choice, it is important to know what are the mechanisms for transforming sofas. It is necessary to find out other features of such furniture, the required dimensions of free space, ease of unfolding, the presence of a department for linen, and decide which types of sofas are better.

Currently, a huge number of designs and types of upholstered furniture have been developed and presented for sale.

All modern models can be divided according to the following criteria:

• type of folding mechanism;
• structural features;
• purpose functions;
• overall size and number of seats.

Gallery: types of sofas (25 photos)

Types of sofas by layout (video)

Description of types of transformation mechanisms

The mechanism for transforming folding sofas is selected depending on its strength and frequency of use. The main types of folding mechanisms for sofas can be concluded in the following list:

• a book, this also includes “eurobook” and “click-clack”;
• folding bed - French or American;
• accordion;
• roll-out mechanism;
• scissors;
• Dolphin.

Types of book type sofa mechanisms are the most famous and common. Their reliability has been tested by time. Enhanced with new technologies and unfolding in just one motion, the click-clack sofa is easy to use even for teenagers. Usually such furniture has a drawer for folding bedding. Sofa-books are moved apart by raising the horizontal surface until it clicks, after which the back is lowered. The inconvenience of such a mechanism is that you have to move the furniture away from the wall. "Eurobook" differs only in that the seat is shifted, making room for the back, so you do not need to move the sofa.

The mechanism of transformation in the form of a clamshell resembles the object of the same name. The seat unfolds in length and rests on retractable legs. The American and French versions differ only in that the former is more durable, frequent decomposition is suitable for it.

The transformation mechanism of folding sofas is selected depending on its strength and frequency of use.

The next type is called the accordion. When laying out such a sofa, one can notice a similarity with the principle of stretching furs. Accordion sofas are durable due to their simple design and are very popular. Although they require sufficient space in front of them, they are simple and easy to use. The back of the accordion sofa combines 2/3 of the bed at once, and modern sofa designs have removable covers, which makes it easier to care for them. Other advantages of furniture with an accordion type mechanism are their compactness when assembled and the rather large size of the unfolded bed.

The roll-out mechanism is the simplest and most reliable. Under the seat is the middle part of the sleeping area, which, when unfolded, extends behind it. The disadvantages of this furniture is that during operation there is a possibility of damaging the floor, and the bed is located somewhat lower than that of other models.

Pieces of furniture with a scissors mechanism are a novelty. When transformed, such a sofa turns into a comfortable double bed with a luxurious headboard and bedside tables on the sides. The seat halves move like scissors.

The sofa dolphin consists of 2 parts. This transformation mechanism is suitable for corner structures. When unfolded, the movement of the additional element resembles the jump of a dolphin emerging from the water. Under a lateral part the box for linen is located. The sleeping place is large and has a flat surface.

Types of sofas by shape, design and purpose

The choice of a sofa is based on the personal preferences of each person. Any kind of this piece of furniture has its undeniable advantages and is able to take its rightful place in the house. Types of sofas by design differ in classic straight lines, comfortable corner, modular and island.

Straight models are classics. Their main plus is that you can choose the appropriate dimensions that correspond to the size of the room. They can be with or without armrests, transforming or stationary.

Straight models are a classic

Corner upholstered furniture has gained a certain popularity among the population. Very comfortable and functional, they can be installed in any room. When choosing such a model, the question may arise of how to disassemble a corner sofa if you need to rearrange it to the other side of the room. In such a case, many models provide the possibility of reinstalling the corner part. The sides of this sofa can be different or the same in length.

Modular furniture is made collapsible and can, like a designer, change at the request of the owner. It will eliminate the need to buy a new one in case of moving, as the modular sofa can be easily reconfigured to suit different room shapes. This is a great option for rest rooms with a home theater.

Island models are initially rounded and are designed to take place in the center of spacious rooms. They are able to form a unique interior, because they create a soft cozy island in the room. Their unusual shape is often successfully complemented by other pieces of furniture.

Sofas of various shapes can be designed for an office or a living room, a kitchen or a children's room. In different situations, you need to seriously approach the choice. For children's furniture, bright colored upholstery is needed, and an easy-to-use transformation mechanism, no sharp or protruding parts.

According to the number of seats, sofas can be compact, designed for 2-3 people, or almost gigantic, which can accommodate a large company. But large models must be bought with caution, after measuring the room and making sure that the exit or balcony door is not blocked.

Sofa transformation mechanisms (video)

Transportation principles

Upholstered furniture is very comfortable for relaxing, but it will take a lot of effort to move it. When buying a sofa or moving, transportation is an important and responsible step, so in order to avoid mistakes and keep the furniture in working order, you need to follow certain rules. A good option is to hire specialists for transportation, who will quickly and professionally deal with this. But if funds do not allow, you need to rely only on your own strength.

Narrow doorways and corridors will only allow you to carry a disassembled sofa. Therefore, it will need to be disassembled, and then assembled in a new place. For this, the assembly diagram of this model, which is always attached to the purchased furniture, is useful. But if the purchase was a long time ago, and all the instructions are lost, you will need to disassemble the sofa, marking every detail, and, if possible, photographing the process.

Carefully wrap all parts in bubble wrap and carefully place them in the trunk of your car or van. To easily transport a disassembled sofa in a spacious van, you need to secure the parts so that they cannot move around the car. After transporting and unpacking furniture, you should not postpone its assembly for a long time.

The sofa is a noticeable and impressive piece of furniture in the house, which should bring comfort and coziness.

Conclusion

When purchasing upholstered furniture, you need to pay special attention to how the sofa unfolds and what mechanism is used in it. It must match the expected load. The service life and usability of the sofa will depend on this. You should not buy upholstered furniture just because you liked the color or your friends bought the same. After all, the sofa is a noticeable and impressive piece of furniture in the house, which should bring comfort and coziness.

Attention, only TODAY!

When buying a sofa for home or summer cottage, special attention should be paid to the device of its transformation. The organization of the sleeping space and the durability of the model depend on it. Today, the mechanisms for transforming sofas are very diverse. They are designed taking into account the area of ​​\u200b\u200bthe premises, often they easily turn a sofa into a bed. Even a teenager can handle them. In order not to get confused when choosing, you need to know the principle of operation, the features of each device and the degree of load on the furniture frame.

Types of sofa mechanisms by type of transformation

Three types of sofas can be distinguished, in which special transformation mechanisms are used. They may be located:

• In direct models- representing a familiar design from the main part with or without armrests, having a linen box (and in some versions - a box in which the sleeping block is located).

• In corner structures- with a corner element that has its own functionality in the form of a niche, a spacious box for bed linen or other things. It saves space in your closet.

• In island (modular) systems - structures consisting of separate modules, different in area, but the same in height (depending on their number, they change their functions).

The sofa owes its name to the mechanism of transformation. Although companies come up with an interesting name for each model, the basis of the name that characterizes a particular model is precisely the principle of its mechanism.

The operation of the device does not change - regardless of the type of model (straight, modular or angular). The sofa unfolds forward, sometimes at the same time it rises up, rolls out, extends, turns. If this is a straight view, the base is transformed, in the corner version the sleeping block is added to the corner, forming a rectangular seating area. In modular constructions, the direct part of one module is transformed without affecting others.

The work of any mechanism is not as complicated as it might seem at first glance. The principle of operation of structures is different and has both pluses and minuses. Most of them can fit all types of sofas (straight, corner, modular). For them, the presence or absence of armrests of the model does not matter. However, there are transformation systems that fit only one species.

Sliding and withdrawable

Roll-out forward models are convenient, they are compact when folded, do not take up much space, do not create the impression of a cluttered room. The principle of their work is to roll out the block forward and raise it to the desired height. Sliding structures are models whose details are interdependent, so when transforming one, the other is automatically activated.

"Dolphin"

One of the universal models with a fixed back and a simple transformation device that allows you to place the sofa in the center of the room or close to the wall.

To unfold the model, you need to pull the loop of the box located under the seat, in which the missing section of the bed is located. When the block is extended to the stop, it is lifted by the loop, put in the desired position at the level of the seat. This design forms a spacious and comfortable surface for sleeping, withstands a large weight load.

"Venice"

The principle of operation of the roll-out mechanism resembles the Dolphin. First you need to push the section located under the sofa seat all the way towards you. By driving the transformation device, extend the seat unit, increasing the width of the sleeping bed. After rolling out the block to the stop, it is raised to the height of the seat with the help of loops.

Such designs are convenient. They are often found in corner models, have a lot of free space in the corner elements.

"Eurobook"

An improved "book" is a great option for daily use. It is equipped with a reliable and easy-to-use transformation mechanism that is resistant to daily stress and allows you to place the sofa in the center of the room or against the wall.

To carry out the transformation, you need to take hold of the seat, lift it slightly, pull it forward and lower it to the floor. Then lower the back, forming a sleeping place. Such furniture rarely has a spacious sleeping bed: it is compact both when folded and disassembled.

"Conrad"

The device, which some manufacturers call "Telescope" or "Telescopic", is a withdrawable model. To make a bed out of such a sofa, you need to pull out the section under the seat, raise the base, then put the pillows in the drawer, close the base and place the mats on it, unfolding them like a book.

The design is convenient and allows you to organize a spacious bed without moving the sofa away from the wall. The floor surface must be flat, as for all withdrawable mechanisms, therefore, a carpet laid on the floor may cause the transformation system to fail.

"Pantograph"

The design, known as "tic-tac" - a variant with a walking mechanism. It is an improved version of the Eurobook. To transform, you need to pull the seat forward with the help of the hinges, lifting it up. At the same time, it will itself take the necessary position, dropping down. It remains to lower the back, forming a spacious sleeping place for two.

In some models, the manufacturer has provided additional armrests that limit the seating area. Such a device is durable and does not loosen the body of the model. However, options with a soft back are not very comfortable. To expand such a sofa, it will have to be slightly moved away from the wall.

"Puma"

This model is a kind of "pantograph" - with a slight difference. As a rule, these sofas have a low and fixed back, so such models can be placed against the wall, thereby saving usable floor space.

The transformation is carried out by one extension of the seat - unlike the previous mechanism. When it rises and, falling, falls into place, at the same time, the second block of the sleeping section rises from below (where the seat used to be). Once the seat is in place, the two blocks form a complete sleeping bed.

"Saber"

Convenient roll-out mechanism "saber" provides for changing the size of the sleeping bed with full or partial unfolding. This design is distinguished by a linen box, a high place to sleep.

Sleeper furniture can consist of two or three sections - depending on the model. To expand it, in any case, you need to roll out the seat, under which the linen box is located, forward. At the same time, the backrest leans back, fitting into the desired position.

"Goose"

The original roll-out transformation system, for which you must first roll out the bed block from under the seat, and then raise it to the level of the seat. At the same time, due to the peculiarities of the pillows rising on the back of the structure, there is an increase in the sleeping bed.

Assembly and disassembly of such structures take more time than other systems.

This model is quite complex and not suitable for daily use. But when folded, models with this system are very compact, they look neat, so they can be purchased as upholstered furniture for a summer house or a living room.

"Butterfly"

Sofas-transformers with the "butterfly" system are considered one of the most reliable, durable and durable. Today, such a system is very popular among buyers. She turns a sofa into a bed in just a few seconds. The transformation is carried out in two stages: the seat is rolled out forward, then the upper block is folded back (to the extended rear section).

The advantage of the model is the significant size of the sleeping bed in the unfolded form and compact assembly. The disadvantage of the mechanism is the vulnerability of the rollers during transformation, as well as the small height of the sleeping bed.

"Kangaroo"

The kangaroo transformation mechanism resembles the dolphin system - with a slight difference: abrupt movements similar to kangaroo jumps. It has a lower part, located under the seat, which, when unfolded, easily slides forward. The retractable block rises to the right place, firmly in contact with the main mats.

The main thing that distinguishes such a mechanism is the presence of high metal or wooden legs. The disadvantages of the system include a short service life with frequent transformation. This design cannot be called reliable.

"Hesse"

The device of this mechanism resembles the "dolphin" system. To expand such a sofa, you will first need to pull the loop of the lower section under the seat, pull it out until it stops. The seat will also roll out. Then the block is raised to the level of the height of the berth, the seat mat is lowered back, forming a full-fledged sleeping bed in three parts.

This system is used in straight and corner sofa models. However, it also has its drawbacks, because with the constant rolling out of the block, a large load is created on the frame of the sofa. In addition, if you do not take care of the rollers, the mechanism will have to be repaired after a while.

folding

Mechanisms with unfolding sections are no more complicated than roll-out ones. Usually they are based on the most versatile systems (“frog”), so they do not require more than a few seconds to turn the sofa into a full-fledged bed. For their transformation, it is not necessary to roll out sections from under the seat.

"Click Clack"

The design of such a mechanism has a second name - "Tango". Some manufacturers call it "Finnish". This is a bifold model, an improved version of the classic "book".

To expand the sofa, you need to raise the seat until it clicks. At the same time, the back is lowered back, the seat is slightly pushed forward, revealing the two halves of the block into a single surface for sleeping.

"Book"

The simplest transformation mechanism, reminiscent of opening a book. To make the sofa look like a bed, you need to raise the seat, lowering the back. When the back begins to fall, the seat is pushed forward.

"Scissors"

The corner sofa transformation mechanism, the principle of which is to rotate one section to another - with the unfolding of blocks and reliable fixation of the sections with a metal fastener from below. In this case, a compact sleeping bed is formed with a bedside cabinet, open as a result of the transformation of the sections.

"Caravan"

The design, the unfolding of which is similar to the Eurobook system, however, it has a fixed back, and instead of two sections of the sleeping bed, three are laid out. At the same time, the seat is also raised and simultaneously pulled forward, then lowered to the desired position on the floor. At this time, the next one moves out from under each block, folding together into a single area for sleeping. Comfortable design with a spacious seating area. In some designs, instead of the third section, a folding pillow is used, which stands in front of a fixed back.

Daytona

System with folding fixed cushions that act as a backrest. The device of the mechanism is a bit like a "clamshell". To transform the sofa into a bed, you need to raise the pillows to the top position, then put the lower ones in the allotted places, grab the handle and turn the seat unit down, revealing a two- or three-piece sleeping bed. When the sleeping place decomposes, you will need to lower the pillows, wrapping them on the bed.

"Tornado"

Folding mechanism designed for daily use. The design is based on a double-folding "folding bed", which is hidden in the usual position of the sofa. It transforms without removing the seat, after tilting the back of the model. The design is convenient, it is not very difficult to disassemble, it has steel elements and mesh at the base, as well as mats of moderate rigidity.

deployable

The following devices provide transformation by deploying sections. In most models (with the exception of the "accordion"), the back is fixed and does not participate in the disassembly of the sofa.

"Accordion"

The device of the mechanism, reminiscent of stretching accordion furs. To expand such a sofa, you just need to pull the seat. At the same time, the backrest, consisting of two blocks connected from above, will automatically fall down, unfolding into two halves.

"Belgian cot"

This design is similar to a "cot" hidden under the sofa's modular seat mats. Even externally, the system resembles a familiar piece of furniture with metal supports. The only thing that makes it different is that it is fixed at the base of the sofa and unfolds right out of it, turning the seat unit down

"French cot"

An alternative to the "accordion" system - with the difference that in the latter the bed is made up of three blocks (according to the principle of folding a fan), and in this system the blocks are wrapped inward and unfold when unfolded. They are equipped with stands and have a narrow type of packing, which is a disadvantage of such designs.

If you are going to expand the sofa, you need to remove the modular pillows from the seat.

"American cot" ("Sedaflex")

Such a mechanism is more reliable than its French counterpart. It is not necessary to remove the cushions from the seat before transformation. The system implies identical sections (there are three of them), which are laid out one after another when the seat is raised. Such a mechanism is quite durable, but it is only suitable as a guest option, because it has thin mattresses, there is no compartment for linen and steel structural elements are felt at the joints of the sections.

"Spartacus"

A variant with a clamshell mechanism. The folding structure is located under the seat, consisting of modular cushions. In order for the sofa to become a bed, you need to remove the pillows, freeing the clamshell blocks. Since they are in the wrapped position, they first take the top one, set the desired position by exposing the metal support, and then unfold the remaining sections. This design is not designed for daily transformation - like analogues.

with swivel mechanism

Models with a rotary mechanism differ from other systems in ease of transformation. In them, the load on the frame is minimal, since there is no need to roll out the sections to the stop. They do not need to lift additional blocks.

Both the integral part of the sofa and the component of each block can turn, depending on the model. Such a mechanism is used in corner models, connecting the two halves of the sections with blocks into a single bed. The principle of operation of the system is based on turning half of the block by 90 degrees and rolling it to the other part of the sofa (with subsequent fixation).

With folding armrests

Folding armrests - a unique technique of the transformation mechanism. Today, such sofas are in the center of attention of designers. With their help, you can furnish the children's room, if necessary, adjusting the dimensions of the furniture.

"Lit"

A peculiar design that allows you to change the size of the sleeping bed due to the deformation of the armrests. At the same time, the sidewalls themselves can be positioned at any angle - and even the positions can be different. To transform the sofa into a single bed, you must first lift the armrest inward until it stops, and then bend it outward. These designs are designed for direct varieties of sofas, they are bought for children and teenagers.

"Elf"

A system convenient for small-sized rooms and children's rooms, a large area for transformation is not needed. Furniture can be placed against the wall. This sofa can be compared with its counterpart, it has a compact body and ample space for storing bedding. The seat surface and armrests form a single unit that folds out in length.

With advertisers

Such devices of the mechanism are somewhat more complicated than the others. Moreover, the design of the mechanism allows you to easily change the position of the angle of inclination of the backrest and footrest, creating the most comfortable position for the user. This sofa can be equipped with a massage mechanism, it has a rather solid appearance, but the transformation into a bed is not carried out.

Double and triple folding systems

The mechanisms of transformation may vary. As a rule, the more complex the mechanism, the more components of the bed (the number of additions). Folding and pull-out sofas fall into this category.

Which one is better for daily sleep?

When choosing a sofa for daily use, you need to pay attention to designs in which the load on the frame during the operation of the mechanism is most uniform and does not loosen the body.

It is necessary to choose the right not only the mechanism, but also the degree of rigidity of the backrest, seat. You also need to choose a good upholstery material and pay attention to models with the ability to change covers.

Filling blocks

When choosing a sofa for daily sleep, it is worth considering the block filler. It is of two types: spring and springless.

The first packing options are distinguished by the presence of twisted springs (the position is vertical). We can distinguish between dependent and independent types. In the first case, the sofa bends down. Such mats are unreliable in that they do not have proper support for the spine during rest or sleep (sitting and lying down).

Independent type springs do not touch each other, so each of them works independently, without forcing the others to sag where they do not need to. As a result, the back always remains flat, and the load on the spine is reduced.

Springless mats have a remarkable orthopedic effect, this is the prevention of problems associated with the spine. They are not only safe, but also very comfortable, provide a complete and proper rest during sleep.

This type of filler is hypoallergenic, this stuffing is not subject to the formation of fungus, mold. It is resistant to dust accumulation, because there are no significant voids. The best springless fillers include natural or artificial latex, coir (coconut fiber), PPU type HR.

What's better?

In order for the sofa to serve for a long time, it is better to choose a quality type of filler: a block with independent springs, latex or coir. It is very good if the type of mat is combined - when not only the core of the stuffing is added, but also other material (to give the desired rigidity).

If a latex block doesn't fit the budget, look into HR-type furniture polyurethane foam or synthetic latex. These materials are somewhat inferior to expensive packings, but with proper operation they will last for 10-12 years.

As for the transformation mechanism, “dolphin” designs and their analogues, models with a “clamshell” system, are not suitable for daily use. The most reliable designs for every day are "Eurobook", "Pantograph", "Puma" and rotary mechanisms.

How to choose the right mechanism?

It is impossible to single out one mechanism unambiguously. The choice depends on several factors:

• designated space for the sofa (folded and disassembled);
• the purpose of the sofa (guest option or alternative to the bed);
• load intensity mode (weight control, taking into account the choice of the “correct” seat and back blocks);
• simplicity and ease of use (the sofa should be light, because complex systems break down more often and cannot always be restored);
• the correct diameter of the steel elements (at least 1.5 cm).

In order for the purchase to be successful, the sofa lasted for a long time, you should pay attention to:

• flawless course of the mechanism in operation (it should not jam);
• lack of looseness of the structure during transformation (this is an obvious marriage that reduces the life of the sofa);
• absence of rust, scratches, dents, mechanism assembly defects;
• high-quality upholstery material that will not wear off from the frequent transformation of the sofa (when sections come into contact);
• strong and durable metal of the mechanism, resistant to heavy weight loads (two or three people);
• the reliability of the frame components to which the transformation mechanism is attached.

It is important to choose the mechanism in which there is no complex design. It will be less prone to breakage.

For a rational choice of a sofa, you should first find out what types of sofas exist. What are their differences, advantages and disadvantages.

There is no strict classification of types of sofas. In this review, I will be guided by the fact that sofas can be classified depending on their design and functional (purpose of the sofa) features. So let's go.

What sofas are depending on the design

In this section, I have selected the most significant design differences between types of sofas. These can be attributed

• the ability of the sofa to change shape and size without unfolding - in this part, I divided the sofas into stationary and modular
• the ability of the sofa to transform - unfold
• types of sofas depending on the type of filler
• types of sofas depending on the fabric for upholstery sofa (I think this indicator is the least significant)

Now about each design difference of sofas in detail.

Stationary, modular and island types of sofas

On this basis, sofas can be divided into three groups - stationary, modular and island. Let's figure out which ones are better.

Stationary sofas

Stationary sofas are sofas that have a fixed size. They do not allow you to change the shape and size of the product. Usually, a stationary sofa is placed along the wall. Often, the back wall of the sofa has a more economical finish (for example, felt), which differs from the main upholstery.

In turn, stationary sofas can be divided into:

Direct sofas - usually used in small spaces. There are folding and non-folding

Corner sofas - there are also folding and not folding .Corner sofas require more space.

• To the virtues stationary sofas can be attributed to the fact that when unfolding the sofa turns into a comfortable bed. You can use this sofa for both sitting and sleeping. The prices for such sofas are also quite lifting.
• disadvantage stationary sofas is a certain massiveness and not the possibility of changing the shape and size.

Modular sofas

A modular sofa consists of parts - modules that can be combined in different orders and create a single product. You can also use sofa modules as independent furniture elements.

Of course, such models are mobile and suitable for creative individuals. You can change the configuration and general appearance of the sofa. Due to the compact size of the modules, modular sofas are easy to move and transport.

• Advantages of modular sofas mobility in every sense, transformation and change in the general appearance of the product
• To disadvantages can be attributed to the fact that such sofas often do not have a bed and have a higher price than stationary sofas, the range of modular sofas on sale is much smaller than the range of stationary sofas.

This type of sofas is used to organize places to relax. At the same time, the sofa is not placed along the walls, but far from them. The sofa forms a semblance of an island. Island sofas have an attractive look from all sides. In shape, they can be round, semi-circular, oval and rectangular. The use of an island sofa requires that there is sufficient free space in the room. The approach to the "island" should be free from all sides. Island sofas come in a variety of sizes. From one or two local to 5-6 local versions.

• Advantages of island sofas mobility, stylish and unique appearance
• disadvantages sofas do not have a bed, require large spaces, have a high price

Output: if you need a sofa to organize a sleeping place, then you need a stationary type of sofa. If you want to organize seating and daytime activities, take a look at the modular versions. An island sofa is good if there is a lot of space in the room.

The design features of the sofas allow you to create sofas of various shapes. A detailed description of the possible forms of the sofa in this article.

Types of sofas depending on the ability to transform

Sofas are folding and not folding.

This type of sofa contains a transformation mechanism in the design, which is located inside the sofa body. There are more than a dozen sofa folding mechanisms. You can read more about all the mechanisms of transformation

When the sofa is folded, the mechanism is not visible. The mechanism allows you to convert the dimensions of the sofa. Usually folding sofas are needed to organize a place to sleep. Folding sofas can be both angular and straight.

• Advantages of folding sofas the possibility of transformation increases the functionality of the sofa - a sofa during the day, a bed at night. Pull-out sofas can contain additional drawers for linen hidden inside the sofa
• The lack of pull-out sofas associated with the reliability of the mechanism itself and the frame of the sofa. If the transformation of the sofa is frequent, then its wear increases. You need to carefully choose a reliable mechanism and a high-quality sofa frame when buying it.

Sofas are not folding

From the name it follows that this type of sofa cannot be converted into anything. Typically, these models are used to organize seating. Non-folding sofas can be used in pairs and or together with armchairs, creating a seating area, for example, around a coffee table in the living room. Normally, such a sofa will work in your kitchen or dining room. If the area allows, then you can use it in the hallway

• Advantages of non-folding sofas: compact size, low price
• Disadvantages of non-folding sofas: weak, limited functionality

Output: if you need a multifunctional assistant, as in advertising all in one bottle, then you need a folding sofa. If the functions are more modest - just sit, then you can save a lot by buying a non-folding sofa.

Types of sofas depending on the type of filler

On this basis, two main groups can be distinguished.

Sofas filled with spring blocks

In such sofas, the filler is a structure made on the basis of metal springs. The springs can be connected in blocks or independent. Also, the spring block can have a common metal frame. This type of sofa is good for sleeping. Spring blocks have a long service life and are comfortable to use.

Sofas with filler without springs

As a filler without spring sofas can be:

• foam rubber
• PPU - polyurethane foam
• latex
• polystyrene balls

Output: the choice of filler type depends on the functional purpose of the sofa. For sleep, it is better to use sofas based on spring blocks or with latex filler. If you want to save a lot, foam rubber will help you, but then the sofa will have to be changed very quickly. PPU occupies a middle position. It will do a good job of solving problems - a sofa for sleeping and for sitting.

There are a lot of upholstery. Read about the intricacies of choosing upholstery for sofas.

Fundamentally, upholstery can be divided into

• natural (cotton, leather, tapestry, jacquard, silk)
• semi-synthetic - consist of a combination of natural and synthetic fibers (flock, chenille)
• synthetic - consist entirely of artificial components (artificial leather)

But, I believe that among other design features of sofas, upholstery fabric plays the least importance. Because it's the easiest to replace.

General conclusion on upholstery: look at them last - the design of the sofa is more important than its appearance. The choice of upholstery type depends on the purpose of the sofa.

Look at this sofa and think about where it can be used. After a short evaluation, it turns out that there are not so many possibilities for using it.

You can find a classification by purpose, which is based on the types of premises in which the sofa will be used.

What will we get as a result

• Living room sofa
• Bedroom sofa
• Sofa for kitchen, dining room
• Sofa for children
• Sofa in the hallway
• Sofa in the office or library
• Sofa for loggia and balcony

It seems to me that such a division is not very correct. Yes, it has the right to life, but the same sofa can be put in any of the rooms. The question is different. What would you do on this sofa - sleep, eat or just sit. Do you understand what I mean? You can eat in the living room and sleep in the kitchen.

Therefore, I would single out three key groups of sofas by purpose

• Seating sofa
• Sleeping sofa
• Sofa for sitting and sleeping

Conclusion on the purpose of the sofa: look at the functions that the sofa will solve in your particular case and choose based on this understanding. Do not rush to the marketing tricks of sellers - like This sofa for the living room - buy it and you will be happy. And you want to eat and sleep on it, and in this example there will be happiness, but the seller who "sold" you an unnecessary sofa.

Video - types of sofas, what to look for when choosing

Finally, I offer a short video clip. Everything that I have already told above once again for consolidation. Only now it is already "video language".

That's probably all. I hope my findings help you.

Sofas have become such an integral part of our lives that today it is difficult to imagine a living room without this interior element. On modern models, you can not only sit comfortably while watching your favorite movie, but also sleep, play with children and just be proud of a stylish solution for your home. Beautiful sofas of various designs will help transform the look of your home and use its space wisely.

Types

The variety of sofas today is striking and somewhat disorienting to a potential buyer. It is one thing to choose a model from five options, and another from a thousand. However, here it is important to calm down and not run after the first color you like, because the main goal of the right sofa is the convenience of its owner. The comfort of the model depends on one of the key factors - the folding mechanism.

It is worth noting that not every sofa is transformed into a sleeping place and has folding properties. For example, monolithic sofas find their purpose in offices, because a sleeping place for a working room is irrelevant, and therefore there is no need to overpay for it.

Nevertheless, if upholstered furniture is selected for daily use at home, it is important to make a choice. the following layout mechanisms:

• "book";
• "Eurobook";
• "click-clack";
• "tic-tac";
• "accordion";
• "roll-out";
• "cot";
• "Dolphin";
• "konrad".

"Book", "eurobook" and "click-clack" are related mechanisms. Their feature is to lift the seat and pull it towards you. The back and seat are thus reunited and represent a large bed. More modern models are equipped with a click-clack mechanism. Unlike its predecessors, it has several positions, for example, reclining, and also allows you to create an imitation of armrests.

The accordion sofa is also included in the classic and familiar mechanisms, which are also quite reliable. The backrest in the assembled state consists of 2/3 of the bed, which, when pulled out, reunites with the third part and forms a comfortable bed.

The roll-out mechanism embodies ingenious simplicity. When the seat is pulled forward, all parts of the steel seat are pulled behind it, after which one part is placed on the wooden frame. The clamshell French and American did not just deserve its name. The familiar folding bed extends from the seat and rests on strong iron legs. The disadvantage here can be considered a lower density of the bed.

In addition to comfort and convenience, some mechanisms are also preferred because of their careful attitude to floor coverings. So, not wanting to constantly correct a carpet that has moved out or scratch linoleum or laminate, you should pay attention to the mechanism "tic-tac". Its seat does not extend, but rises, which eliminates any movement of the sofa parts on the floor. At the same time, the back of the model is placed in the vacated space and becomes a spacious sleeping place.

The beautiful name of the sofa "dolphin" is also not invented just like that. When assembling the sofa, part of the bed goes under the bottom of the seat, reminiscent of the dive of this graceful inhabitant of the seas. Sofa "konrad" - one of the most beautiful and comfortable mechanisms for sleeping. Parts of his sleeping place, rolling forward, have a spring block in their arsenal, which has orthopedic support for the body during sleep.

And if everything is clear with the mechanisms, then it's time to turn to another important point of a beautiful sofa - the choice of upholstery. Sofas can be divided according to this feature into two groups:

• leather models;
• fabric.

The first option involves the use of natural and eco-leather. Their price segment is vastly different, as is the wear resistance period. Natural models will serve for many years without cracking and delighting with softness. Fabrics for upholstery of upholstered furniture in some cases have complex names, but their knowledge will help to acquire a quality model. So, the most affordable option is natural cotton, which can last about 5 years without any processing.

If the model in your dreams should have velvety and comfort, the best solution would be upholstery with flock, jacquard and chenille. If the sofa involves a complex, well-drawn print, it is best to use tapestry. Its weaving is made with a mixture of cotton, wool and synthetic threads. Arpatek is considered a luxurious innovation. This material resembles the texture of thin delicate skin, while consisting of a fabric web. The wear resistance of such models is incredibly high.

And in addition to fabrics and mechanisms, beautiful models have a different shape. For example, a corner sofa is perfect for placing a sofa in one of the corners of the room. If the sofa is located in the center, choose a classic model with armrests.

The most fashionable colors and materials

Designers this year tried to create not just beautiful sofas, but elements of comfort and warmth at home. For example, smoothness of lines has become an important feature. The colors this season are also full of warm radiance in shades of wood, sand and beige. Stylish models today include several colors and textures. So, one of the most popular is natural wood with its characteristic pattern. In this case, almost everything is suitable for fabrics, for example, a vintage-style tapestry.

In addition to fabrics, designers consider leather to be very relevant. And if for some a leather sofa is associated with an office environment, experts offer combined models.

photos

Color range of sofas for 2017:

• red;
• white;
• plum;
• graphite;
• combination.

photos

The last point is given special attention. Light and white sofas are decorated with contrasting pillows in the color of young greenery. Bright models, on the contrary, become more subdued due to accessories of a neutral shade.

How to choose?

Before going to the store in search of the most beautiful model, it is important to decide on the purpose of its purchase. Sofas in the hallway, living room or nursery have completely different priorities in choosing, as well as purely individual sizes.

Before going to the store in search of the most beautiful model, it is important to decide on the purpose of its purchase. Sofas in the hallway, living room or nursery have completely different priorities in choosing, as well as purely individual sizes. You should start here with the living room. This room is considered the soul of an apartment or house, and the soul must be beautiful in everything. Both monolithic and folding sofas are suitable for the living room, if the living room also serves as a place for residents to sleep. So, before buying, it is important to measure the room and determine for yourself the desired size of the sofa, which will not hamper the household and interfere with free movement around the room. Today, almost every manufacturer offers to make furniture according to individual sizes, which is an indisputable advantage of modernity.

It is important to measure the vending model not only assembled, but also disassembled. For a cramped living room, compact and small sofas are a good choice. A room that is not limited by strict frames will organically accept unusual models of various shapes. And if all the parameters agree, you can proceed to the inspection. High-quality models never creak, and the mechanisms work smoothly and effortlessly. It is good if each of the household can easily assemble and unfold the sofa. Convenient for all details will prevent breakage from incorrect and inaccurate layout. In the unfolded state, the entire structure should be as stable as possible.

And also soft creators of comfort can be successfully located in the hallway, because sometimes after a hard day's work you really want to sit down on something comfortable without taking off your shoes. A small sofa will perform this task as well as possible and will not take up much space, contrary to stereotypes.

Modern models for the hallway are performed:

• in the form of soft banquettes without a back on carved legs;
• small sofas with a backrest without armrests;
• sofas with back with metal forged and wooden armrests;
• in the form of a sofa with a folding bed;
• in the form of an angle sofa
• narrow sofa with practical drawers under the seat.

When choosing, you should focus on the shape and size of the hallway. A narrow and small rectangular hallway can only accommodate a bench. It is not recommended to load it with lockers and other details. Simple models in this case look more harmonious and lighter. The square entrance hall is made cozier by the corner model of the sofa and even the model with armrests. If this part of the apartment or house pleases with spaciousness, then a full-fledged sofa will turn the hallway into another place to relax.

But for a children's room, an important criterion, first of all, is safety. It shows up in everything. Environmentally friendly materials such as wood, rounded edges and a minimum of synthetics in fabrics will be the key to a successful purchase.

How to care?

When a sofa is bought and pleases the eye, you should not relax, because care is another key point in the long-term operation of furniture. So, fabric upholstery is cleaned with a soft brush or vacuum cleaner every three days. This action allows you to remove daily dust, preventing its deep penetration into the fibers.

If visible contamination nevertheless appears, you should turn to specialized products for cleaning the upholstery, remembering the general rules for all types of fabric:

• all pollution are removed in the direction of the pile;
• spilled liquid it is absorbed with a soft cloth, without rubbing the wet spot;
• stain being processed from edge to middle.

Treating leather and keeping it looking presentable is no easy task. First of all, a leather sofa should not be closer to the batteries by more than a meter. This will prevent cracking of the skin. And on the leather model, it is not recommended to put your favorite colored rugs and capes, thereby preventing skin staining. Once every few days, such furniture is wiped with a dry soft cloth.

It is worth noting the need for wet cleaning with microfiber once a month. Visible dirt can be removed with soapy water. After the procedure, the surface is wiped dry. If the spots are difficult to remove, the most reasonable solution would be to use special products for the skin.