A chair made of water pipes with your own hands. What kind of furniture from plastic pipes can be made with your own hands

In this publication, the idea of ​​\u200b\u200bmaking a table that differs in its design from standard products is from metal water pipes.

In this video, the master showed how he made the table. I used ordinary steel pipes.
Let's start in order. 4 adapters. Tees. Flanges. I had to buy a vice to fix the pipe in them and cut the thread. In order not to make holes in the table, clamps were used. Before starting cutting, I smeared the beginning of the pipe with a small piece of lard to make it easier to carve. Unfortunately, the plumbing wrench failed to make a thread. So I had to buy a ratchet. It is much easier to wind the thread with it than with a plumbing tool. The end result is a good cut.
I had to cut off part of the pipe. Before that, I dripped a little liquid soap.

This makes cutting much easier.

In the process of work, an emergency happened - the vise cracked. I wanted to fix the pipe, I started to twist ... Even one day

didn't work, had to be replaced under warranty. I had to go to a friend and have him do the carving.

As a countertop, I decided to use two wooden shields made of pine. Wiped them from dust. I glued the two parts together with glue. In order for the glue to take better, put all kinds of loads on it. The next day he removed the goods. I was pleasantly surprised, the glue perfectly connected the two surfaces. It was necessary to measure the distance from the legs of the table. Fixed the legs on the screws. Used soap to tighten screws. Not bad idea! The master also did

After repair or construction work, a lot of materials remain. Fans of handmade items will no doubt find their use. After repair work in the bathroom, you can easily make furniture from pvc pipes with your own hands, using leftover materials for this.

Depending on the type of furniture that is planned to be made, the set of materials and tools may vary. But basically, you will need the following tools to work:

• perforator;
• screwdriver;
• hacksaw;
• scissors or knife.

Materials needed for work:

• pipe cutting;
• glue;
• connecting elements of various shapes;
• plugs.

To make the furniture look more beautiful, paint is useful. Beds, tables, shelving can be painted in the color you like. For beds in the children's room, a delicate pink, blue, bright orange, yellow shade is selected.

PVC materials

Soldering iron for welding plastic pipes

Variety of types of plastic pipes

Types of plastic pipe connections

Stages of the plastic pipe welding process

Manufacturing and assembly process

Below are the diagrams, drawings necessary for the manufacture of furniture from pipes. With their help, you can make armchairs, chairs, beds, racks, tables, a huge number of decorative elements. Products are interesting, durable and safe.

Armchair

The original way to use plastic pipes is to make a chair out of them. There are many options for its manufacture. It all depends on the desire, capabilities and imagination of the master. Plastic pipelines can become a material for the manufacture of a chair. You can make it with pvc pipes, a knife and glue.

To get an unusual chair, you need to do the following:

• First, cut pieces of different lengths. The main thing is that the longest segments should be the same length. They will act as supports;
• long will be needed for the back, armrests;
• then the segments are glued together so that the surface of the armrests and the backrest is on the same level. To the bottom, the length of the segments changes.

Thus, it turns out an interesting chair that will decorate any room in the house. To make it even more comfortable, pillows are placed on it or sheathed with foam rubber. In such an armchair it is pleasant to spend time, read a book, watch TV.

Details under the letter "A" determine the width and depth of the seat. The length of the pipes "B" determines the height of the seat from the ground. Details under the number "C" are the height of the armrests, and under the number "D" are the height of the backrest.

The above method makes a table, a bed. Different segments are glued together - it turns out the base of the bed. On top of it you need to put a comfortable mattress, pillows, blanket. This is a perfect place to sleep and rest.

In addition, cribs are made from this material. To do this, you need to study the diagrams and drawings. Then prepare the desired size segments. They are connected with fittings. If you fasten the parts together with glue, they will be very strong and durable. Without the use of glue, the structure will turn out to be collapsible and can be removed at any time. The bed for the kid will be unusual, reliable and strong. If there is more than one child in the family, several beds can be made.

Another option for a bed for two children made of pvc pipes is a polyvinyl chloride bunk bed, photo. It is not difficult to make it, you only need a drawing, a diagram. Following the instructions, you can create a variety of bed options: single or double, bunk.

Table

You can make such furniture from polypropylene pipes with your own hands, like a table. Its frame will be made of pipes, and the countertop will be made of any other material. At the same time, it must be remembered that PVC pipes are not suitable for heavy loads. The lighter the table top, the better.

The size of the countertop in this case will be 91.5 x 203 cm. The following materials and tools will be needed:

• door leaf as a tabletop;
• fasteners for connecting parts;
• drill;
• saw.

You will also need segments of the size:

• 30 cm - 10 pcs;
• 7.5 cm - 5 pcs;
• 50 cm - 4 pcs;
• 75 cm - 4 pcs.

To assemble the frame, prepare:

• t-shaped fittings - 4 pcs;
• plugs for pipes, fittings - 10 pcs;
• 4-way fitting - 4 pcs;
• cross fitting - 2 pcs.

According to the scheme, first assemble the side elements. Then proceed to the back of the table. Pay attention to the stability of the structure. All details must be the same.

The last step is to collect all the elements in one design. Inspect the product for irregularities, sharp parts. Carefully process everything, glue the connections. A table is made in such a simple way.

Tool

materials

Preparing parts of the right size

Connecting Fragments

Rack

Armchairs, beds, tables - not the whole list of products that can be made from this material. Another useful piece of furniture is a shelving unit. Design parameters can be very different. It all depends on the size of the room where it will be installed, and the desire of the master.

First of all, it is recommended to make a drawing, a diagram of the future product. Next, prepare the required amount of a certain size of parts for them. Connect everything together. Plywood or other material can act as the base of the shelves. The only thing to keep in mind is that the materials are not suitable for heavy loads.

Such racks are used for flowers, toys in the children's room. Shelving can be installed in the garage. There products will be a great place to store tools and other things. You can place garden tools on the shelves: pots, tools. PVC products look unusual, neat, do not require additional decoration. Plastic shelves, racks do not harm the health of others, they are durable and environmentally friendly.

The nuances of working with the material

Models from water pipes are unusual, original. They decorate the room, garden plot. Do-it-yourself plastic furniture will bring zest to the interior and attract the attention of guests.

Furniture is made from plastic pipes. Two types of material are used in production: polypropylene (PP) and polyvinyl chloride (PVC). Each of them has its own characteristics and is suitable for the production of different products. Polyvinyl chloride is a cheaper material. It is more commonly used for sewer pipes. Its advantages include:

• strength and durability;
• ease of installation;
• low cost.

The disadvantage of PVC is that when exposed to high temperatures, the pipes begin to deform. Unlike them, products made of polypropylene are not subject to change in shape at high water temperatures. They are able to withstand liquid heating up to 60 degrees, and if the pipe is reinforced, even more.

Both materials are equally suitable for making furniture. In addition, there are a huge variety of items that are made from scraps. These are shelves, coasters, a frame for a mirror and more. Furniture is easy to assemble. The design consists of pipes and fittings, the elements are also glued together. Even a beginner can make pieces of furniture from pvc pipes with his own hands.

How to bend a pipe

Products made from this material look unusual. They will look even more interesting if they consist of curved parts. For example, a table with curved legs. In addition, various decorative elements are made from pipes, which come in different shapes. In such cases, bending the pipe is simply necessary.

For this you will need:

• funnel;
• sand;
• scotch;
• plate;
• metal container;
• gloves;
• saw (hacksaw);
• knife (scissors);
• sandpaper;
• a device for bending pipes (it can be different, mostly improvised materials are used).

The process looks like this:

• cut a piece of the required length;
• seal one end with tape;
• using a funnel, pour in as much sand as will go in;
• heat the measured amount of sand in a metal container;
• put on protective gloves for safety, carefully pour sand into the pipe through a funnel;
• seal the other end with adhesive tape, then the sand will not spill out during the bending process;
• leave for a while, it will warm up from the inside;
• when it warms up, start bending;
• give the pipe the desired shape;
• at the end of the work, tear off the adhesive tape, pour out the sand;
• when the pipe cools down, it will be the required shape.

One end of the pipe is sealed with tape

Using a funnel, pour sand into the pipe

Having measured the required amount of sand, pour it into a metal bowl and warm it up well

Using the same funnel, pour the prepared sand back into the pipe.

Cover the other end of the pipe with tape. This is necessary so that the sand does not spill out during work.

Leave the pipe like this for a couple of minutes. During this time, it will warm up from the inside. The material will become soft and pliable.

While the sand is still hot, you can shape the cut piece of pipe into the desired curve or shape. After that, remove the tape and pour the sand back.

decoration

One of the options for decorating furniture made of pipes is to use different colors of the material. A table with blue legs will be a bright element in the room. Products come in different colors: white, black, blue, blue, yellow. Connecting elements also come in different shades. Thus, the pipes will be one color, and the fasteners will be another. Combinations of white with blue or black with red look beautiful.

If we are talking about armchairs, chairs, they are decorated with decorative pillows. The foam lining on the back and seat is sheathed with a beautiful bright fabric. Decorative pillows decorate the product, make it cozy, comfortable, original. They come with embroidery, buttons or tassels. The color range of pillows is varied. When choosing it, it is necessary to take into account the overall design of the entire room.

Children's furniture should be interesting, colorful. It is recommended to cover the chair, high chair with a durable fabric with a bright pattern. It can be a cartoon character, toy cars, dolls, stars and much more. Pay special attention to furniture made of pvc pipes for children, it must be safe, without sharp elements. Otherwise, babies may get hurt.

It is not difficult to make furniture from pvc pipes. It will become a highlight in the room, will attract the attention of guests. Plastic pipes are inexpensive, so you can save a lot of money, as new furniture is expensive.

You can create a lot of interesting things from plastic pipes. Of course, first of all they are used for their intended purpose, that is, for the assembly of pipelines, water supply systems and even heating.

However, the use of plastic, polypropylene or PVC pipes is not limited to this. From them, for example, you can create unique designer items, furniture, coasters and even entire structures.

In this article, we will tell you why and how this is done.

Article content

Why plastic?

By plastic, of course, we mean all types of materials that are used in the production of pipes.

It will not be possible to cut a sample of a profile pipe with scissors, or rather, not every model will do. If you don’t guess, then just ruin the cut. It's okay, of course, but it's still a waste of time that can be avoided. For a profile pipe, they buy a plastic cutter, or the corresponding type of universal scissors.

The segments are assembled with fittings, most often for diffusion welding. They are very easy to work with, they cool quickly, are unpretentious and very cheap.

Another option is chemical compositions or. Also a good way, especially convenient when you don't have one.

Only now there is a nuance, the resulting connections will become monolithic, that is, not amenable to disassembly. It's not a problem, but still. For greater mobility and the possibility of subsequent modifications, use threaded ones.

Or you can use combined schemes. For example, make a frame for a table by welding, and attach the legs to threaded fittings. Then, if necessary, the legs can be easily removed. This means that the table is easy to modify, transport and change the way you want.

Plastic pipe chair

It is very easy to assemble. Its construction is simple. It consists of legs, a basic supporting frame, a stand on which they actually sit down, as well as a backrest. Although the latter option is optional.

Stages of work:

1. We collect the legs of the chair.
2. Assembling the base frame.
3. As a stand, we take a sheet of plywood of a suitable size.
4. Fasten the plywood to the frame with self-tapping screws.
5. We fasten or weld the legs of the chair.
6. We are working on the design.

That's all - the chair is ready. All fasteners are held on fittings. we leave you. If you want a collapsible or partially collapsible design, buy threaded models. If this is not critical, use welding. For do-it-yourself welding, welding is easier and connections are more reliable.

We fasten the plywood with ordinary self-tapping screws. Nothing extraordinary. A soft foam seat is attached to it.

An example of assembling a chair from polypropylene pipes (video)

Assembling the stand

With stands it's even easier. There are a huge number of variations. From stands from a single pipe, to strong shelves with a bunch of sections.

The simplest stand is made from a single frame, on which special holders are mounted. Those are then attached to the wall. If you want a mobile stand, then legs are attached to it.

It is also easily modified into a clothes dryer. You can even apply a design approach - assemble a dryer with a beveled shape in the form of the English letter "Z".

In it, the foundation is made. A vertical part of the frame is attached to them, with longitudinal pipes, on which linen is hung. This part can be held at any angle. 30 to 60 degrees. Either option is completely viable.

Do not forget that you can additionally decorate. The easiest way is coloring. Plastic does not interact well with paints, but acrylic paints adhere well to it.

Do-it-yourself furniture from pipes can be made from the remnants of materials that are used during installation and repair work on the arrangement of various pipelines. For example, shelves, tables, chairs, as well as organizers are made from such an unusual material.

They are distinguished by their original appearance and can last for several decades without losing it.

Despite the fact that some craftsmen make furniture from metal pipes with their own hands, it is still better to use plastic for this. At the same time, polyvinyl chloride or PVC is usually used for such crafts as the cheapest type of plastic. Sewer pipes are mainly made from it, since, having all the advantages of polymers, it is quite inexpensive.

Plastic pipes are resistant to rot and rust

If we mention the advantages of plastic products that allow you to make furniture from propylene pipes with your own hands, then these include:

• high strength;
• durability;
• resistance to decay and rust;
• ease of installation.

At the same time, it is always worth remembering that this type of pipe is afraid of exposure to high temperatures, under the influence of which the plastic is deformed. In this regard, in the event that you are going to assemble furniture from water pipes with your own hands and install it in a room where a high temperature will be maintained, for example, in a bathhouse, you should use polypropylene for this product, and not polyvinyl chloride .

Service life of polypropylene pipes

Polypropylene can withstand temperatures up to +60°C and is much stronger than polyvinyl chloride, but products made from it are more expensive.

PVC pipe bone lamp

Important! The popularity of using plastic pipes in design is due to the ease of installation.

The fact is that any product can be mounted from them quite easily with the help of fittings, as well as gluing. At the same time, you can not only make furniture from a profile pipe with your own hands, but also make many other products from them:

• stands;
• decorative elements;
• portable structures;
• small architectural forms.

So, for example, in the garden of plastic pipes, you can make original gazebos or benches. By the way, if necessary, they can be easily disassembled. It is also worth noting that some owners of household plots build quite functional structures from pipes, for example, greenhouses.

Scheme of a gazebo made of PVC pipes

In any case, in order to make various products from plastic pipes, it is enough to know the basic principles of their installation and have a healthy imagination. There are no other requirements to meet for this. Therefore, collect the remnants of plastic pipes, and also learn how to make furniture from a profile pipe with your own hands in the photo. You can take such educational material on the Internet on specialized sites dedicated to interior design.

Basics of working with plastic pipes

In order to be able to make furniture from pipes with your own hands, you need to understand the general algorithm for working with plastic.

Types of plastic pipe connections

So, working with them usually includes the following operations:

• selection of the installation scheme and drawing up a sketch of the product;
• cutting pipes of the required size in the required quantities;
• assembly of the frame and individual elements using fittings, glue or soldering;
• checking the resulting product for strength.

The scheme for assembling a particular type of furniture can be developed independently or taken from specialized sites. For example, you can use any classic furniture as a model. In this case, of course, it is necessary to make allowances for the peculiarities of the technical characteristics of plastic pipes.

The design of the metal-plastic pipe

If we talk about small furniture that will not be used at elevated temperatures, then there is not much difference in choosing the type of plastic. The only thing worth paying attention to is the price. The fact is that polyvinyl chloride is much cheaper than polypropylene, so it is quite suitable for such crafts.

Do-it-yourself furniture made of polypropylene pipes should be done in the case when increased product strength is required. The fact is that such products have walls several tens of mm thick, which allows them to withstand very serious mechanical loads. In the same case, when you need to assemble overall furniture, it is recommended to combine pipes made of polypropylene with PVC pipes. To do this, PVC products are spent on the installation of elements of lightly loaded areas, and polypropylene is used to create a supporting frame.

In the event that you buy pipes, do not purchase products with reinforcement. The fact is that they are much more expensive than simple ones, but there is no special benefit from them. In order to distinguish simple pipes from reinforced ones, it is necessary to study their surface. If it has a strip of red, blue or green, then these are reinforced pipes and it is unnecessary to buy them.

Important! To cut the prepared pipes to the desired length, you will need to use a pipe cutter or special scissors.

In order to make furniture from pipes with your own hands, fittings for diffuse welding will also be needed. In addition, they can be connected with special glue for plastic. This method is very relevant in the case when you do not have a special welding machine at home. Threaded fittings can also be used in this case.

Soldering iron for welding plastic pipes

Making a chair from plastic pipes

In order to learn how to assemble furniture from pipes with your own hands, you need to start with fairly simple products. For example, a novice furniture maker can make an ordinary chair. This very simple design consists of a base frame, legs, backrest, as well as a stand on which they sit. In this case, the backrest can be installed here as desired.

This simple design consists of a base frame, legs, backrest, as well as a stand on which they sit.

The immediate stages of work on this product are as follows:

• leg assembly;
• frame installation;
• mounting with self-tapping screws to the frame of a stand made of plywood sheet;
• welding chair legs;
• strength testing of the structure.

Do-it-yourself furniture from PVC pipes can be made in this way using fittings. In this case, you can disassemble the structures, if necessary. If you do not need to do this, use welding. By the way, it will be possible to install a seat made of foam rubber on a stand screwed onto the frame.

It will be possible to install a seat made of foam rubber on a stand screwed onto the frame

In addition to the chair, a novice home craftsman can gain experience in the manufacture of plastic products by creating coasters and shelves from pipes. There are a huge number of options. So, for example, the simplest design is made on the basis of a single frame, on which special holders are mounted. With their help, a shelf or stand can be attached to the wall.

The simplest design is made on the basis of a single frame, on which special holders are mounted.

By the way, many people forget that plastic can be additionally decorated. So, it is quite well painted with acrylic paints. Another option for decorating products from it is the use of plastic pipes of different colors. Unfortunately, the set of colors here is small: white, black, gray and brown, but with their help it will be possible to make a product that is quite interesting from a color point of view.

However, experienced designers can use such a tool to decorate almost any room in a very unusual way. For example, you can make several original organizers for cleaning products, shoes or toys. It is enough just to glue several tubes together.

You can also make ordinary decorations out of plastic, which can combine the functions of the same organizer. So, for example, with the help of scraps of plastic pipes, mirrors, wooden furniture, walls of rooms are decorated. As a result, an unusual in terms of design and at the same time functional space is created.

Do-it-yourself dryer for things made of PVC pipes

Features of the manufacture of furniture for the nursery

If you decide to seriously make furniture from plastic pipes with your own hands for use in everyday life, you must remember that for a children's room such products must be made taking into account special requirements. The fact is that safety is very important for children. In this regard, it is better not to use plastic pipes in the children's room that can emit harmful substances. In addition, furniture made from it should not have sharp corners.

Do-it-yourself canopy over a crib

If you are going to assemble children's furniture from plastic pipes with your own hands, the photo of each of its elements should be studied separately. Thus, even before the installation process, you can highlight the most dangerous elements of the same bunk bed and eliminate them. In addition, according to the photo, it will be possible to coordinate the future situation in the child’s room with other members of your family.

Interesting coffee table made of plastic pipes

Plastic pipes, as a material for making furniture, are good for their availability and low cost. For those who live outside the city or have a summer cottage, the situation is familiar when, after construction, laying communications or organizing drip irrigation, pieces of pipes of different lengths remain. At first glance, they can only be thrown away. This is a very erroneous opinion, because it is from such pieces of different diameters and lengths that many original and useful interior items can be made. It is only necessary to apply a little skill and desire to work with your own hands, imagination.

Do-it-yourself bunk bed made of plastic pipes

Convenient and roomy rack made of pipes for a pantry or hallway

The list of such crafts is limited only by human imagination. From this material you can make items that are necessary every day: clothes dryers, shelves, racks. A laptop stand, various glasses for pens and pencils can decorate life and make it more convenient. Original beds made of polypropylene pipes, armchairs will become the main accent in the interior of the bedroom, without burdening the family budget. If you involve your creative imagination, you can create cabinets, a huge number of options for storing various items. Moreover, they can be placed in the house, garage, on the loggia, veranda, in the yard. Everywhere they will look appropriate and original. A table and chairs made of plastic pipes can be placed on the veranda, in the kitchen, in the nursery. In the yard or in nature, collapsible canopies from the sun and rain, various portable structures will be useful. Owners of summer cottages and household plots make comfortable greenhouses, install gazebos, benches that can be left outside in any weather. Folding chairs made of PVC pipes are necessary for fishing, during barbecue trips.

DIY folding picnic chairs for children

The advantages of creating products from plastic pipes with your own hands

Convenient and roomy whatnot made of plastic pipes

Making furniture from PVC pipes with your own hands brings satisfaction and joy, helps the development of creative inclinations, decorates everyday life, makes it easier and more comfortable.

Comfortable chaise lounge with a table for a relaxing holiday in the country

Do-it-yourself furniture made of plastic pipes has a number of advantages.

1. Such production takes a little time and effort. It does not require years of practiced skills. Both a teenager and a woman can easily cope with the task.
2. Products have a rigid, stable design that can withstand heavy loads.
3. The furniture is mobile and light. It is easy to move, rearrange, simply assemble or disassemble and put away for a while in the pantry. It takes up little space this way.
4. PVC pipes are resistant to moisture and corrosive environments, do not rust. Furniture from them perfectly tolerates adverse weather conditions. It does not lose its performance, retains its original appearance after a long stay on the street. It is easy to care for it, tolerates washing, cleaning.
5. From this material you can make a huge number of useful things. The only limitation is the fantasy and imagination of the master.
6. Low material cost.
7. The ability to create items with an original author's design that cannot be bought in a store.

Children's bed made of PVC pipes for babies, made by hand

Choice of construction and design

Glamorous pink plastic tube laptop stand

The manufacture of furniture begins with the choice of design and the variant of its design implementation. It is necessary to build on the function that the furniture will perform. Then select the design parameters:

• collapsible or solid;
• dimensions of the entire product;
• the number of elements and their sizes;
• method of connecting parts of the structure.

Convenient bar counter for giving from plastic pipes

When thinking about design, you can be inspired by browsing magazines and furniture catalogs, websites about furniture on the Internet. Optionally, it will be furniture made of polypropylene pipes. Original ideas may arise when viewing furniture options made of rattan, wood, metal.

Stand for storing things from plastic pipes for the boiler room

This stage of work ends with drawing up sketches, determining the necessary materials, and drawing up a cost estimate. At the same time, it is necessary to take into account how you can use those materials that are already available, as well as availability, if materials need to be purchased in addition.

Large and beautiful table with PVC pipe legs

What materials are needed

Necessary materials for creating furniture from PVC pipes

After the design is selected, it is necessary to draw up a list of materials and tools needed to create crafts. For this you may need:

• plastic pipes;
• fasteners: glue, screws, self-tapping screws;
• fitting.

Stages of the plastic pipe welding process

Plastic pipes are easy to cut. After that, a sharp edge with burrs remains, which must be cleaned. Just cut the thread. When heated, polymer pipes bend well, retaining a new shape after cooling. Sometimes the frame is easier to bend than to assemble with pieces of pipes and fittings.

Plastic pipes of various shapes and fittings for them

There are several types of plastic pipes. All of them differ in price and ability to withstand various loads and temperature conditions. Knowing the properties of each type of pipe, you can make the best choice and save.

They are divided by purpose:

• plumbing
• sewer.

Variety of types of plastic pipes

From the point of view of the manufacture of furniture and useful household appliances, sewer pipes, unlike water pipes, benefit from a lower price. They are made in large diameters.

According to the type of polymer from which the pipes are made, they are divided into:

• polyvinyl chloride (PVC);

PVC pipes of different diameters and colors

• polyethylene (PE);

Polyethylene pipes of large diameter, straight and corrugated

• polypropylene (PP).

Polypropylene pipes and fittings

They differ slightly from each other in properties. Polyethylene behaves worse at elevated temperatures and under the influence of sunlight, it is elastic. Polypropylene pipes are more durable and rigid. The positive quality of PVC pipes is increased resistance to chemical attack and reduced flammability. They tolerate ultraviolet exposure very well. The difference in the performance characteristics of polymers in most cases will not be critical for the manufacture of furniture. But the difference in price is a factor that should be taken into account. The most expensive are polypropylene. PVC pipes have the best price-quality ratio for creating furniture structures.

In addition, pipes are reinforced and non-reinforced. Polymer pipes are most often reinforced with fiberglass or aluminum. The reinforcing layer is soldered between two polymer layers. This is done to increase strength, rigidity, and reduce linear expansion when heated. Reinforced polypropylene pipes are used for hot water supply. The letters RC are added to the designation of the reinforced pipe. In appearance, they can also be distinguished. In addition, some manufacturers apply a colored strip along the pipe, informing about the scope of the product. Pipes with a blue stripe are used for cold water supply, with a red stripe for hot water or pipelines with a coolant. The presence of both bands indicates the versatility of the pipe. It should be borne in mind that reinforced pipes, although stronger, are much more expensive. Make a decision on the advisability of additional costs to the master.

Trolley with fastening made of plastic pipes

What tools to use

In order to update your interior with crafts from plastic pipes with your own hands, you need a minimum amount of tools:

• hacksaw or special scissors for plastic pipes;
• pencil or marker;
• roulette;
• file;
• special soldering iron for plastic pipes;
• drill.

Do not interfere with gloves and goggles. Despite the fact that working with PVC pipes is not dangerous, shavings fly when sawing, sharp edges remain. In order not to damage your hands and eyes, it is better to use protection.

Basic principles for the manufacture of objects from polypropylene pipes

Beautiful and useful things made by hand from polypropylene pipes

To make useful beautiful things from plastic pipes, desire and creative imagination are needed. You can not do without knowing the basic principles of work. When working with plastic, the following sequence of actions should be observed.

Convenient shoe rack in the hallway with your own hands

1. Structural study.
2. Drawing up the scheme of installation of the product, the choice of fasteners.
3. Preparation of elements (cutting pipes of the required length and quantity).
4. Mounting the frame with fittings, glue or soldering.
5. Preparation of additional structural elements.
6. Assembly of the entire product and strength control.
7. Painting or other decoration, if intended.

Beautiful canopy for a baby crib with plastic pipe construction

Finishing stage - decoration

DIY hanging garden swing for a summer cottage

Crafts from plastic pipes look spectacular and extraordinary, but additional decoration enhances this impression.

1. Painting the finished product or its individual parts with acrylic paint. There are many different colors and shades on the market. She looks bright, tolerates cleaning well.
2. Decorative self-adhesive film is also a good option for decorating furniture and interior items made of polypropylene pipes. If you choose the right picture, it is not always possible to determine that the furniture is made from pipe waste. Coated with varnish, such items acquire moisture resistance, and the service life increases.
3. Adds originality by drilling round or curly slots. This decoration method is suitable for glasses, lamps, mirror frames.
4. Painting or carving on the surface will decorate many items made of plastic pipes.
5. Unique crafts are obtained by combining plastic with elements made of tin or plexiglass.

Examples of exclusive coffee tables with a base made of plastic pipes

With a little effort and imagination, you can inexpensively and quickly create a new interior in a country house or yard, organize a comfortable comfortable space around you. Polymer pipes are suitable as a material due to their lightness, plasticity, resistance to corrosion and moisture. This is a modern material that allows you to create unique designs. Furniture made of plastic pipes has a wide scope. Beautiful objects made from pipes with their own hands cause satisfaction and fill with pride. The reward for the invested efforts is an unusual atmosphere, a comfortable life.

Safe kindergarten chairs for toddlers made of plastic pipes

Video: do-it-yourself comfortable folding chair made of PVC pipes