Carpenter's glue is great. How to apply glue moment joiner? Product description

The super prefix added to various products often turns out to be just a marketing ploy, without fundamentally changing anything in performance. Super PVA glue is a product of the Soviet industry of the late 80s. True, it was then called differently and for its time it was very revolutionary.

From the history

GOST 18992-80, dated 1983, described the requirements and characteristics of a plasticized PVA dispersion, which one to one coincides with the same qualities of a modern product with the name "glue moment Super PVA D3".

But in the Soviet nomenclature, the marking was different - DF51 / 15V.

After deciphering, one can understand that active substance is a high-viscosity dispersion of PVA, with a volume fraction of 51%. 15% dibutyl phthalate is added as a plasticizer.

Characteristics and purpose

Of all the polyvinyl acetate adhesives, super PVA has the highest adhesive power, declared tensile strength, more than 50 kg / cm 2. The biological safety characteristic meets the increased requirements. Withstands up to 6 freeze/thaw cycles. The addition of a plasticizer in this volume made it easier to mix with water. In this case, the emulsion does not precipitate.

In descending order, here are the recommended areas of application:

  • wood;
  • shoes and leather;
  • cardboard;
  • polygraphy;
  • package;
  • repair work.

Yes, it is the tree in the first place. Woodworking companies often choose this adhesive as their main adhesive.

AT Soviet time DF51/15V was used in the tobacco industry(!).

Adding this glue to cement mortar, improves the waterproofing properties of the screed and increases adhesion when gluing tiles.

To get a transparent adhesive for polycarbonate, some manufacturers went to the trick. During the manufacturing process, they add ethyl cyanoacrylate to the emulsion. Small amounts of this additive increase the optical properties of the glue joint, but worsen its elasticity. Such a product is produced under the brand name glue moment super PVA. But according to an objective assessment, compared to other adhesives for polycarbonate, it wins only in price.

Instructions for use

Precautions should be observed only if you have an allergic reaction to a certain group of repellents. The fact is that the plasticizer, dibutyl phthalate, in its pure form is used to repel mosquitoes, and its concentration in PVA glue is super, quite high. To prevent possible reddening of the skin of the hands, we recommend the use of latex gloves. Otherwise, this glue is safe.

To understand how to glue with PVA glue with high quality, you must firmly master the following rules:

  1. The surfaces to be glued must not be dusty.
  2. Degreasing is the key to a quality seam.
  3. Reliable fixation throughout the day important condition for polymerization.
  4. Compliance temperature regime is the foundation of successful work.

After mastering the above rules, the instruction is quite simple. Optimum temperature for bonding 18-25°C. Please note that the parts themselves must have this temperature, and not just the air in the room. The surfaces to be bonded must be cleaned of all excess. This is best done with fine sandpaper. Moreover, the use of sandpaper will increase the surface roughness, which leads to an increase in the contact area and thereby improve cohesion.

The cleaned and sanded surface must be wiped with a volatile solvent. In addition to degreasing, this procedure will remove dust. The presence of dust sharply reduces the adhesion of glue to the part.

PVA dispersion is applied thin layer, on both surfaces and leave for 6-8 minutes. During this time, on each part, the adhesive penetrates into the thickness of the material by several microns and already begins the polymerization process. Then the glued surfaces are pressed against each other, and securely fixed. Please note that, unlike solvent-based adhesives, when working with PVA, the duration of fixation is crucial. The minimum time for reliable setting is 24 hours at a temperature of 20-25°C.

Important! Full polymerization of polyvinyl acetate takes place within 7 days!

Only after this time, the adhesive seam acquires the declared characteristics.

Of course, if you glue cardboard, then you don’t have to wait so long. But when working with furniture, compliance with the exposure time is highly desirable. When gluing wood, carefully following the instructions leads to a paradoxical effect - the glue line of PVA glue is super, it becomes stronger than the product itself. In other words, when the load is exceeded, the piece of wood itself will break, and not the glue line!

It is best to remove excess glue immediately after application. You can do this with a damp cloth. After drying and complete polymerization, only scraping with a knife or sandpaper. The action of household solvents causes swelling of the polymer film, and does not lead to dissolution.

When repairing or assembling furniture, wooden models, laminate and other materials of such a structure, it is necessary to use glue - "Moment Joiner" is suitable for these purposes. In addition to the above materials, it is used when working with veneer, coarse fabrics, cardboard, accessories and plastic. He earned trust, so he became a common glue for wood.

Characteristics

As part of Moment Stolyar glue, the main component is PVA dispersion, the second most important is a plasticizer. Some additives increase bonding strength and resistance to high and low temperatures. The material is dyed.

Such a set of components determines the important characteristics of the adhesive - it sets quickly, the strength reaches an average value after 5 minutes, good heat resistance. Suitable for all types of wood, except that dense ones need to be processed more carefully.

Preparation for work

According to the instructions, before directly gluing the surfaces of interest, they must be processed accordingly in order to obtain a solid base for applying Moment Joiner.

The surfaces to be glued together must be well cleaned of dust, sawdust or other debris. The fit of the parts must be tight. If work is carried out with a tree, then its moisture content should not exceed 8-12%, otherwise the setting time will increase.

Some types of wood are treated with a solvent before gluing - this helps to remove excess fats from the surface and increase strength characteristics gluing.

Instructions for glue "Moment Joiner"

  • If a thin bonding seam is required, the tip of the nozzle is cut off accordingly. The more layer is needed - the more cut off;
  • Apply glue to one of the treated surfaces in a thin layer. To level the layer along the length of the material, use a spatula, roller or brush. If a solid tree is glued together, then glue is applied to the other surface in the same layer;
  • The surfaces are pressed against each other, and a time of at least 10-15 minutes is waited for the glue to gain strength;
  • With improvised means or heavy objects, the surfaces are clamped to ensure complete fixation.

Using Moment Joiner glue is simple, but you need to remember that you can’t use it if ambient temperature air below 10 degrees. Moreover, glue does not endure frost - from low temperatures it needs to be protected.

  • Glue Express
  • quick setting
  • For all types of wood
  • High strength after 5 minutes
  • heat resistant

PRODUCT CHARACTERISTICS / PURPOSE

Moment Joiner fast-setting heat-resistant high-strength adhesive for all types of wood, chipboard, plywood, veneer, laminate, cardboard, fittings, fabric, leather, some plastics. Moment Carpenter is recommended for use in the assembly and repair of furniture.

COMPOUND

PVA dispersion, plasticizer, dye, additives.

INSTRUCTIONS FOR USE

The surfaces to be bonded must be clean, dry and close to each other. Some types of wood (for example, teak) are recommended to be degreased with any solvent at hand, such as acetone.

Higher humidity increases setting time.

Apply a thin layer of adhesive to one of the surfaces to be bonded. Use a brush, plastic spatula or roller to apply the adhesive. When gluing hardwoods, the adhesive must be applied to both surfaces. Connect the parts to be glued together while the glue is still wet. Work to be carried out with room temperature 20 0 C. The surfaces to be glued must be pressed against each other no later than 10 minutes after applying the adhesive. Firmly press the surfaces together with any heavy object.

STORAGE CONDITIONS

Keep tightly closed. Protect from frost!

WEIGHT 250 g WEIGHT 750 g WEIGHT 3 kg
VENDOR CODE MSE 12 MSE 09 MSE 3000
SHELF LIFE 24 months 24 months 24 months
INDIVIDUAL BARCODE 4 600 611 215 259 4 600 611 215 754 4 600 611 215 303
QUANTITY IN TRANSPORT PACKAGING 12 pcs. in a corrugated box 9 pcs. in a corrugated box 6 pcs. in a corrugated box
GROUP BARCODE 4 600 611 215 129 4 600 611 215 099 4 600 611 215 365
NUMBER OF BOXES PER PALLET 98 pcs. 60 pcs. 28 pcs.
NUMBER OF PIECES PER PALETTE 1176 pcs. 540 pcs. 168 pcs.

Glue is an indispensable substance for repair work. "Moment joiner" - glue that has proven itself in working with wooden surfaces. But this is not its only purpose. We invite you to familiarize yourself with the properties of the product and the rules for its use.

Characteristic

As part of the Moment Joiner glue, the main ingredient is PVA. In addition, it contains a plasticizer, dye and additives that increase the strength and heat resistance of the adhesive. After drying, the substance has the color of a light tree.

Types of glue differ in water resistance. So, D2 withstands short-term exposure to water, and "super d3 waterproof" has a high degree of reliability in contact with water. Sold in tubes and jars of different sizes: from 125 ml to several kilograms.


"Moment joiner" has gained popularity as a substance for gluing wooden objects, but its scope is not limited to this.

What materials can the product be used for:

  • for wood,
  • veneer,
  • plastic,
  • foam rubber
  • cardboard,
  • coarse fabrics,
  • accessories.


Positive properties:

  1. Heat resistant.
  2. Humidity resistant.
  3. Grabs quickly.
  4. Does not attract pests.
  5. Suitable for all types of wood.
  6. Invisible after drying.
  7. There are no toxic impurities that can damage the structure of the tree.

Application

For maximum bonding reliability, a number of conditions must be met. Therefore, before gluing, read the recommendations and instructions of the manufacturer. The following are general rules handling glue "Moment joiner".


Instructions and rules for working with wood glue:

  1. The tip of the nozzle is trimmed depending on the width of the desired seam. The thinner it is, the smaller the cut is made.
  2. Before processing, the surfaces are cleaned of dust and debris.
  3. To remove excess fat, a solvent is used. The measure is necessary to improve the adhesion of the adhesive to the surface.
  4. One surface is treated with glue using a spatula, roller or brush.
  5. The surfaces to be joined must be kept fixed for about 10-15 minutes in order for the adhesive to work better. "Moment express carpenter" seizes much faster, so it is used for processing small parts.
  6. Time for complete hardening - at least a day.
  7. The higher the moisture content of the wood, the longer the glue will set.
  8. For fastening, you can use clamps or heavy objects.
  9. The temperature of the glue should not be lower than +10 degrees.


Advice! If solid wood is being processed, then both parts are covered with glue.

Glue "Moment Joiner" is a worthy option for woodworking and more. It is used to collect new furniture and repair the old one. This product is an alternative to nails and self-tapping screws that only spoil the look.

Glue "Moment Joiner" is well known in the domestic market of construction chemicals. The composition is produced at the Russian production facilities of the German concern Henkel. The product has established itself as an excellent adhesive suitable for the repair and production of wood products, it is widely used in everyday life and in production.



Peculiarities

The composition of the "Joiner" includes a polyvinyl acetate dispersion with the inclusion of special plasticizers and additives that improve the adhesive properties of the material and increase the reliability of the connection. No toxic and poisonous substances are used in the manufacturing process of Moment glue, which makes the material environmentally friendly and allows it to be used in the repair of household items. The chemical safety of the product is confirmed by a quality certificate and certificates of conformity that meet strict European standards.


Thanks to special additives, the adhesive composition does not violate the structure of wood fibers. After drying, it is invisible. The scope of the tool is quite wide. Glue is successfully used when working with any kind of natural wood, plywood, chipboard and fibreboard, cardboard, veneer and laminate.





It is allowed to work with the composition at temperatures above 10 degrees and relative humidity not more than 80%. When working at low temperatures, the adhesive may lose its high adhesive properties, and the bonding will turn out to be of poor quality. The average material consumption is about 150 grams per square meter surfaces. The dried composition is compatible with all types of paint and varnish products, therefore, if necessary, the glued thing can be painted or varnished.

Advantages and disadvantages

The high consumer demand for Moment Stolyar glue is due to a number of positive properties of the material.


  • The moisture resistance of the glue allows the use of objects glued by the "Joiner" in conditions high humidity.
  • Due to its good heat resistance, the adhesive is able to withstand temperature loads up to 70 degrees. This is very convenient when working with veneered elements that require heating during installation.
  • Excellent adhesion and a short setting time allow you to quickly form a strong and durable joint. "Joiner" refers to express trains, so working with it significantly reduces repair time.


  • The time for complete drying of the butt joint is no more than 15 minutes.
  • Connection durability. Bonded surfaces will not lose their adhesion throughout the entire service life of the repaired product.

To disadvantages include low frost resistance of the composition and certain requirements for wood moisture: repaired products must be used at positive temperatures, and wood moisture should not exceed 18%.



Varieties

On the modern market household chemicals the lineup joinery adhesives is represented by five series, differing from each other in composition, conditions of use, time of primary setting and complete hardening.

"Moment Carpenter Clay Express"- a universal moisture-resistant agent produced on water-dispersion basis and intended for gluing wood different breeds, as well as wood fiber and particle boards, veneered products and plywood. Full setting time is 10 to 15 minutes depending on the temperature environment and wood moisture.


The glue has high moisture-resistant properties, does not contain solvent and toluene. The product is suitable for working with paper, cardboard and straw, which allows it to be used instead of stationery glue for crafts and appliqués. After applying the composition, the working surfaces must be pressed tightly against each other. You can do this with a vice. Also, products can be pressed down with a book or other heavy object.

The product is available in tubes weighing 125 g, in cans of 250 and 750 g, as well as in large buckets of 3 and 30 kg. It is necessary to store glue in tightly closed containers in the temperature range from 5 to 30 degrees.


"Moment Carpenter Super PVA"– the optimal solution for gluing wood of various species, laminate, chipboard and fiberboard. The glue is available in red cans, has a transparent structure and is almost invisible after drying. The moisture resistance of the material corresponds to class D2, which allows it to be used in dry and moderately damp rooms. The carpentry composition is suitable for working with paper-laminated plastics, straw, cardboard and paper, which allows you to do crafts with children without fear harmful effects. Complete setting of the solution occurs after 15-20 minutes.


"Moment Joiner Super PVA D3 waterproof"– universal assembly composition, capable of withstanding repeated freezing and thawing, designed for bonding wood products and laminated surfaces. The water resistance limit is determined by the DIN-EN-204 / D3 index, which indicates the high water-repellent properties of the material and allows the use of products repaired with it in high humidity conditions. The product has performed well in repair work in kitchens, bathrooms, toilets, as well as an assembly tool when gluing parquet and laminate.


"Moment Carpenter PVA universal"– water-dispersion based adhesive, suitable for gluing elements made of any wood species, MDF, fiberboard and plywood. The tool has a short time full setting, transparent structure and does not leave colored and cloudy spots on the tree. The index of the initial strength of the primary setting is 30 kg per cm2, which characterizes the excellent adhesive properties of the product. The main condition is that the surfaces to be glued must be tightly fixed for 20 minutes. Adhesives on a water-dispersion basis have a strictly defined amount of water in their composition, therefore, it will not work to further dilute the agent to increase the volume, otherwise the proportions will be violated, and the mixture will lose its operational properties.



"Moment Carpenter Instant Snap"- a universal moisture-resistant agent, made on an acrylic water-dispersion basis, intended for any wood. The initial setting time is only 10 seconds, which refers to the composition of the second adhesives and requires careful use. The solution is easy to apply and leaves no residue. The product is excellent for gluing wood to metal, PVC to plastic, withstands up to five cycles of short-term freezing.

Loading...Loading...