How to rinse a rubber hose for plumbing. How to clean the drain hose of a washing machine

The hose is one of the important hookah accessories that makes smoking more enjoyable. You probably know about the benefits of a silicone hookah hose, but now it’s worth talking about how to care for it, namely how to clean it.

Indeed, during smoking, a lot of resins and other impurities settle inside it. So that the hose does not clog and always provides a comfortable and pleasant smoking, we will now tell you how to properly clean the silicone hose.

Properly clean the hookah hose

Cleaning a silicone hose for a hookah is a fairly simple process that does not take much time and effort. But do not think that you can treat the procedure negligently and not seriously. Having made at least one mistake, the hose may become unusable.

Consider the basic principles of cleaning silicone hookahs:

1. Disconnect the hose from the hookah.

2. Rinse in a pre-prepared concentrated solution of citric acid. It will remove excess odors and quickly clear the internal scale.

3. Wash the mouthpiece separately running water, constantly increasing pressure.

4. We blow out the hose and use a fishing line or thread to get rid of the resin residue inside the hose. (Line length should be 3 hose lengths).

5. In the middle of the fishing line, we fix the rags and clean the hose, stretching the fishing line in 2 directions. As the rag gets dirty, we change it to a new one.

6. Dry the hose in a vertical position so that all the water is glass.
We advise you to wash the hose with the mouthpiece for 15 minutes to achieve the desired result.

Using this instruction, you can quickly and efficiently clean the silicone hose from internal scale. Each step of cleaning this product will be efficient and productive, rather than purging the hose with water or a soft tourniquet.

Silicone hookah hoses are easier to clean than leather or plastic ones. Therefore, if you choose a hose for a hookah, give preference to silicone ones because of their ease of care.

(function(w, d, n, s, t) ( w[n] = w[n] || ; w[n].push(function() ( Ya.Context.AdvManager.render(( blockId: "RA -219849-29", renderTo: "yandex_rtb_R-A-219849-29", async: true )); )); t = d.getElementsByTagName("script"); s = d.createElement("script"); s .type = "text/javascript"; s.src = "//an.yandex.ru/system/context.js"; s.async = true; t.parentNode.insertBefore(s, t); ))(this , this.document, "yandexContextAsyncCallbacks");

Gradually, tobacco residues accumulate on the walls of the hookah and soot. Fragrant the smoke is filled with strangers smells. smack bitterness prevents the lover from enjoying the chosen tobacco variety. In such a situation, a hookah lover thinks about how to clean the hookah hose.

Flushing Rules

Pay special attention to the cleaner means. Forget about modern powders, which are then difficult to completely remove from surfaces. Remains detergents do not have the best effect on the taste of smoke. Even repeated washing with water will not help get rid of the smallest particles of powder.

The best option for washing a hookah is a solution of baking soda. For raise
effectiveness, you can add a small amount of citric acid to it. But in this case, you need to be careful.

Models of hookahs with plastic hoses are best tolerated by water. They not only tolerate the cleaning operation well, but also serve for a long time. Silicone hookah hose also works well in this situation.

Please note that the rinse water must be hot. Otherwise, the soot will not soften. Chemical cleaners and special agents must not be used. After each use of the hookah, you need to carefully blow out the hose. The smoke should completely come out of it.

Close one end of the hose with your thumb. Pour soda solution into it.
Now close the other end with your finger. The liquid in the hose will flow from one end to the other during the lifting and lowering process. After 2 minutes, pour the solution out into the sink. Depending on the degree of contamination, several such procedures may be necessary.

How to clean leather hoses

The skin does not tolerate prolonged exposure to water. The product swells up quickly. It is deformed. Only dry cleaning is suitable for leather.

Cleaning method with a brush

Prepare a thin brush in advance. In the absence of a brush, you can take advantage strong fishing line with soft rags.

Parsing hookah and proceed to cleaning the hose. To do this, prepare a brush and soda solution. Be sure to consider the type of material from which they are made. Metal hoses must not be washed with water as they will rust. They must be dry cleaned. Carefully pass the brush inside the hose.

Silicone hose for hookah tolerates such a procedure well. Be careful when using wire. To it is enough to make one sharp movement to damage the hose . If possible, use the profile adaptation. Wrap a soft cloth around the wire. Making progressive movements , clean it . In case of severe pollution, you will have to change rags several times. Take care of this in advance. The procedure is completed by blowing.

Sometimes large debris gets into the washing machine during the washing process. This can lead to internal contamination or cause more significant problems. This article will show you how to clean drain hose in the washing machine.

Disconnecting the hose

At different models and types of washing equipment, the drain hose is disconnected in different ways. You will need to get the drain hose in different ways, since washing machines have features in the design of the body and different ways drain pump fixings.

However, the first step is to do the following:

Disconnect washing appliances from the power supply;
Close the tap through which water enters, then drain the remaining stagnant water through the drain filter hole;
Pull the hose itself out of the sewer pipe.

When the tools for disassembly are ready, you can begin to disassemble the washer.

In such machines as Whirpool, LG, Candy, Beko, Samsung, Ariston, Indesit, Ardo, it is possible to get the hose only through the bottom of the washer.

It is done like this:

First you need to dismantle the bottom panel using a flat screwdriver;
Then you need bolts that will hold the filter;
Coming for more convenient operation you need to put the washer on its side. First you need to put something under the typewriter;
Use a tool to loosen the hose clamp. Then remove it from the pump connection;
Disconnect it from the fasteners on the body of the machine.

It should be noted that there are washers that do not contain a bottom or have a special removable tray.

In Electrolux, Zanussi machines, to clean the hose, you will need to dismantle the back cover of the washer.

It is done like this:

First you need to detach the hose, freeing it from the latches that hold it;
Disconnect the hose supplying water from the valve;
Unscrew the top panel of the machine, which is held on by bolts, which is on the back wall;
Disconnect the top panel (cover) of the machine;
Take off back wall, after unscrewing the screws located at the edges;
Loosen and remove the hose clamp.

In washing appliances of the brands AEG, Bosch, Siemens, you will have to get the hose through the front side of the case.

You need to do it like this:

From the front of the body of the machine, you need to dismantle the clamp, as well as the sealing gum;
Remove the tray for loading washing powder;
Dismantle the lower bar of the machine body;
Unscrew the bolts located at the bottom of the panel;
Dismantle the door lock;
Remove the front panel of the washing machine;
Loosen the clamp that holds the hose;
Remove it.

The above methods are only suitable for those machines that have front loading. In those machines that are loaded through the top hatch, the hose is removed differently.

First, the fixing bolts of the side wall are unscrewed, then it is removed by itself side panel. Next, loosen the clamp on the hose. The last step is to remove the hose itself.

How to clean the drain hose?

After disconnecting the hose, it must be visually inspected and cleaned. To properly clean the hose, a thin Kevlar cable is needed. Using a small brush at the end of the cable, you need to clean the plaque inside the hose.

Hose cleaning is carried out as follows:

First you need to insert the cable inside the hose. And first on one side, and then on the other;
Perform the above procedure as many times as necessary for high-quality cleaning;
Rinse the hose under a strong stream of water;
Fix the hose in the old place;
Assemble the machine in reverse order.

Prevention measures

Usually, a clogged washer hose occurs on its own. They can't get into it small items because they will get stuck in the pump or drain filter.

An important component of the hookah smoking culture is proper care for your smoking accessories. If you do not properly clean the hookah, then it will become clogged after a short period of time, and it will be unpleasant and difficult to smoke it. If while smoking you feel extraneous smells and tastes, then this is the main signal that the hookah must be thoroughly cleaned. It is best to clean the hookah immediately after each use. It is in this case that the resins in the hookah will not have time to dry, and you will be able to clean them with the highest quality.

Cleaning a hookah is an extremely simple process. However, it does not require you a large number time. However, this process must be taken very seriously, because careless cleaning can damage the hookah and render some of its components unusable. You need to clean each element of the hookah separately, but the most attention should be paid to the hose, because it is there that the largest amount of foreign matter accumulates. Therefore, consider the basic principles of how to wash a hookah hose. It doesn't matter if this hose is silicone, wood, or leather - it still needs to be rinsed well.

First of all, the hose must be disconnected from the hookah. In order to completely get rid of odors and foreign matter, it is necessary to rinse the hose thoroughly in a concentrated solution of citric acid. After that, you need to take a separate mouthpiece, attach it to a tap with water and rinse it, constantly increasing the pressure. cold water. Such washing should be carried out for at least fifteen minutes. After that, we blow the hose well from both sides. To improve the cleaning effect, we use a fishing line. The length of the fishing line should be three lengths of the hose. We attach a rag in the middle of the fishing line, and stretch it through the hose in two directions alternately. If the cloth is dirty, it must be replaced with a new one. Dry the hose at the end of cleaning. It should be in a vertical position so that all the water can drain from it.

If standard hoses are used, they cannot be washed. They contain metal, which, in contact with water, can rust, which will lead to increased likelihood inhalation of rusty dust. In case of contamination of such hoses, the only way out is to replace them. Sometimes ordinary blowing helps, however, the effectiveness of such cleaning is small.

You can learn more about the rules for cleaning the hose when watching the video:

The cup is filled with your favorite tobacco, holes in the foil are made with such difficulty, coconut coals are kindled, and after a few minutes of tedious waiting, you take the first puff - and your mouth and lungs fill with dust and debris. Ugh! And, perhaps, you were looking forward to trying the new mint tobacco from “ starbuzz“, and instead got the taste of rose - tobacco, which was smoked a couple of weeks ago. What the hell is this?! Here are some tips on how to avoid it, how to clean a hose and which of the latter do not pollute the smoke or spoil the taste the longest. Well, man, it's time to clean your hose, restore the lost flavors, and start smoking hookah again.

But for now, let's clarify the situation a little so that you clearly understand how to care for, wash, and also buy decent hoses.

1 . Almost any hose needs to be changed over time. Stop washing the old hose already! You don't wear the same sneakers all your life, do you? Here you go. So it is with him.

2 . Dust and debris in the hose is not hookah charcoal ash.

3 . Water and humid air from the hookah will ruin the hose. Those. and washing is bad for him.

4 . Even if the hose is washable, it, too, if not carefully looked after, deteriorates rather quickly. So over time, you need to change and washable hoses.

Hose washing

Situation 1: you can taste the flavors of other tobaccos. This is called “inhabited by ghostly tastes” and requires an immediate exorcism.

Situation 2: after a while, the hose acquires a typical hookah taste. The process is gradual and not always noticeable for the owner of the hookah.

Well, now let's start the treatment.. No, priests will not be needed - we can manage on our own.

1 . Close one end of the hose with your thumb and fill it with water to halfway or less. To freshen up and really clean the hose, squeeze some lemon juice into it. The dude in the picture did not close the hose with his finger, and voila - a puddle on the floor. So be careful.

2 . Close the other end of the hose with your thumb and lift it higher than the first. Raise and lower both ends of the hose in turn - so the water from lemon juice will flow back and forth.

3 . After a couple of minutes, flush the water down the sink. Turn away, otherwise you will be horrified by the sight of the soot that you just breathed. If you want, repeat the procedure several times until clean water flows out of the hose.

4 . Take the hose in the middle and, turning it with your hand like the blades of a mill, dry it. The centrifugal force will suck out most of the moisture from the hose, thereby reducing the influence of the latter on the hose if it is not washable.
If you've ever seen dust, dirt, or rusty flakes coming out of your hose, then know that this is due to the destruction of the hose - a completely natural process over time. And here are some ways to clean without water.

Cleaning the hose without water

Method one: punishment, or a good whip Holding both ends of the hose in your hand, confidently, but without fanaticism, hit it a couple of times on the sofa to knock debris stuck to its walls. Blow out the hose from both ends while keeping your finger in the air flow. Blow until the flying debris can no longer be felt with your finger. You can repeat the procedure if you wish. If you have read up to here, then it is better to go and buy a new hose, because this one is no longer a tenant

The second way: from blowing to suction Take air compressor(such as the one used at gas stations to inflate tires) or a powerful vacuum cleaner and blow or suck air through a hose, which will remove loose particles. For reliability, blow the hose several times from both sides. Plus, in this way you can dry the hose after washing it. Again, if you do this every time before a smoking session, then it's time to throw the hose in the trash and get a new one.