Finishing in the house from a bar. Self-finishing a log house from the outside and from the inside

Timber is one of the most popular materials for the construction of wooden houses. We will find out the best options for interior decoration and laying communications of such houses.

Wooden houses made of timber are one of the most specific objects in terms of interior decoration and laying communications. We will tell you how to choose the right type of coatings and finishing materials, tell you the strengths of different types of finishes, and give explanations for installation.

How to make the interior decoration of the house from a bar

• Electrical and communications

The specifics of the interior decoration of the house from a bar

It is believed that the most authentic interior of a house made of timber must necessarily include the natural look of natural wood. However, there are three counterarguments to this:

1. Really high surface quality is achieved only when first grade lumber is used, which is on average 50-70% more expensive than conventional construction wood. Additionally, you will have to spend money on high-quality coatings.
2. Wooden walls may not be appropriate in some rooms and living areas, such as the kitchen or bathroom.
3. In rooms finished with wood, only furniture of the corresponding appearance looks good, and it is somewhat more expensive than ordinary cabinet furniture.

Additional interior decoration of a wooden house is not only a whim due to aesthetic wishes, there are also purely technical aspects. Firstly, with a sufficiently thick layer of finishing material or the formation of a false wall, the laying of wiring or other communications is greatly facilitated.

Also, additional wall decoration is a good way to improve the noise and heat insulation of rooms, reduce airflow, it can be used to hide warping and cracking of wood over time.

Methods for interior decoration of a house from a bar

So, what are the possible ways of interior decoration of a house from a bar? The natural look and texture of wood is achieved by simple painting: opaque monotone, stain, varnish, tinting compositions. The wall must first be sanded to remove possible planing defects, pile and burrs, and even out the chamfers.

After that, the timber is impregnated. The fire-retardant composition for interior work dries completely within 5-7 days, then the tree is sanded again to knock off the film and the raised pile. Impregnation reduces the consumption of coatings, stabilizes the color of the wood and clogs the pores, preventing moisture from migrating deep into the solid wood.

Another type of finish is lining with clapboard, MDF panels or room siding. Usually this method is used to create a visual accent or zoning. As a rule, openings, dirt-resistant panels are formed with the help of hinged cladding, stationary furniture installation sites and other functional areas are equipped.

The skin is mounted mainly in a vertical orientation, creating an opposite visual range with the base material. For fastening, a system of horizontal rails is used, to which the finishing panels are fastened with clamps or polymer glue.

All other types of finishes require rough sheathing made of gypsum board, LSU, plywood or particle boards. Such a superstructure is needed to compensate for the seasonal fluctuations of a wooden frame, which never come to naught.

Therefore, the sheathing is arranged on a subsystem of a galvanized profile, which is attached to a wooden wall on straight perforated hangers, which ensure the resistance of the system to deformations and shrinkage vibrations. Almost all types of coatings can be made on a prepared rough surface using standard technology: stone and tile cladding, wallpaper, painting, siding stickers.

Of the specific types of coatings, two can be distinguished. The first is a spray of cork chips on the wooden walls. The result is a rather interesting appearance, fogging of the walls disappears, noise absorption improves.

The second option is plastering the walls on a polymer reinforcing mesh or shingles. At the same time, it is important to adhere to the recommended technology: do not exceed the permissible coating thickness, prepare the base with high quality, use plaster with reinforcing fibers.

The fundamental differences between finishing a house made of timber and stone

To be sure of the success of applying one or another type of coating, you need to understand how the mechanics of the behavior of a wooden house differs from brick and frame ones. Wood is an extremely unstable material, it tends to expand and contract with changes in humidity and temperature. Therefore, the finishing system must normally perceive the mechanical vibrations of the base.

Another feature of a log house is the ability to pass water vapor and cold air. The presence of any coating does not fully smooth out these shortcomings, so the log house must be well caulked, and ideally sealed with liquid seams. To prevent the formation of condensate under the hinged finish, a blind vapor barrier with a double-sided air gap should be used.

The third and most important nuance is that finishing cannot be carried out immediately after the assembly of the log house. Depending on the number of storeys, the type and quality of materials, it takes time for shrinkage and permanent deformation. For glued timber, this period is up to six months, for solid timber - about 10–15 months, and a house made of logs can shrink for several years. At the same time, it must be remembered that after the first and second caulking, the log house should also settle almost to its original size.

Features of the choice of finishing in a house from a bar

When choosing a finish, you should pay attention not only to the technical side, but also to the practicality of various coatings. We offer several proven recommendations for the arrangement of various premises.

Bathroom. In the bathroom, the humidity is much higher and there are strict sanitary and hygienic requirements. The best way to finish is plastic lining, or laying tiles on a plasterboard base. In both cases, the frame is assembled according to the nested box principle and is not rigidly attached to any part of the supporting structure. When installing the lining, it is necessary to waterproof the walls with a dense plastic film.

Kitchen. It makes sense to lay tiles only on the apron of the cooking zone, the rest of the surfaces may have a natural look of a log house. The ceiling is recommended to be made of plastic panels with a glossy lamination or other materials from which sticky dust can be easily removed.

Hallway. It is recommended to simply align the walls, so that later, without additional problems, you can install a wardrobe and an entrance group of furniture. If the house has a separate dressing room, this recommendation can be neglected.

Living room. Fabric suspended ceilings are recommended for all habitable spaces. They will eliminate the need for careful adjustment of wooden skirting boards; gaps will not form at the junctions. At the same time, the stretched fabric perfectly perceives the seasonal deformations of the log house.

The walls in the living room usually have the most authentic look for a wooden house, especially with a fireplace and matching furniture. But at the same time, the natural appearance of the surfaces is formed not at all by a construction beam, but by its imitation. From the inside, the room is sheathed with wooden siding, the appearance of which in all respects surpasses even first-class lumber.

Bedroom. In a place for sleeping and secluded relaxation, it makes no sense to adhere to the general concept of a wooden house. If the appearance of wooden walls for some reason brings discomfort - feel free to use the type of finish that you like.

Children's. The requirements for noise reduction in children's rooms are the most stringent. Therefore, initially it is necessary to take into account the presence of double-sided sound insulation on the partitions and be sure to sheathe the outer walls with insulated false walls. For finishing, hypoallergenic materials approved for use in children's rooms according to environmental standards should be used.

Electrical and communications

There are no difficulties with horizontal laying of pipes for heating and water supply in a wooden house. They are placed as close to the floor as possible, if desired, hidden under a false box, trimmed with wood-like panels. It is only important to properly equip the places of passage through the walls, as a rule, for this, cells are cut out during the assembly of the log house, then the cavities are filled with soundproofing material.

Much more difficult is the situation with the wiring. The weak current is easily hidden in the channel plinth, however, power networks are not allowed to be hidden inside combustible materials. One option is to lay the wiring openly, using wires without general insulation, twisted into a braid and stretched over ceramic plugs. This solution is quite interesting from an aesthetic point of view and at the same time completely safe.

Hidden wiring in a log house is also possible, but its planning is carried out at the stage of assembling the house. In each beam, it is necessary to drill coaxial vertical channels, into which, after laying the final crown, steel pipes will be inserted, inside which the cable is passed. The main wiring is carried out inside the floors, while the cable is necessarily dressed in a non-combustible hard sheath.

Do not be deceived by the experience of foreign builders laying cables inside frame and wooden walls without any additional protection. Abroad, other mains voltage parameters apply, special types of cable are used that are not available for the domestic market, and besides, the switchboard is necessarily equipped with fire protection devices.published

Subscribe to our Yandex Zen channel!

If you have any questions on this topic, ask them to specialists and readers of our project.

Wooden houses themselves look representative. From the point of view of heat retention, they do not need interior decoration. But not everyone likes the yellow-brown monotony in the interior of the home. Fortunately, the construction market offers many materials for the interior decoration of a log house - you just need to take some time to study the issue and you will definitely choose the right option for yourself.

Timber house in modern design

Features of wooden houses

The interior decoration of a house made of timber does not fundamentally differ from a brick or block frame. You just need to take into account a few features:

• complete shrinkage of the log house lasts several years;
• over time, the gaps between the bars expand;
• wood requires mandatory protection from moisture.

Because of such nuances, it is impossible to hurry with the beginning of interior decoration, otherwise cracks will go along the walls and ceiling. To avoid trouble, it is necessary to cover the wood with a protective varnish in the first year after the construction of the frame.

Builders are advised to adhere to a certain order when finishing a wooden house:

• Laying utilities on top of the subfloor
• Main flooring decking
• Timber processing (filling cracks, puttying, applying an antiseptic, decorative finishing)
• Ceiling decoration (puttying and varnishing of beams, installation of finishing coating)

Plus glued laminated timber - it shrinks less than other types of wood

In a new house, it is better to leave the original appearance of the timber - eco-friendly, natural, even. And if the log house has stood for several decades, then it is advisable to close it from the inside with modern finishing materials, since it will be difficult and expensive to restore the appearance of a tree.

Types of interior decoration

Glued laminated timber does not need additional cladding. It looks perfect even without varnishing. If the walls are made of profiled wood, you will have to think about finishing.

Protective impregnation to a tree is necessary in any case. It creates a barrier against fungus, mold, moisture and even fire. May lighten or leave the surface color unchanged.

It is easy to hide a low-quality profiled timber under panels imitating natural wood from a lining, block house or siding - this way the house inside will not only support the eco-style, but will also become warmer.

It is also possible to create a modern interior in a wooden cottage. The beam can be easily sheathed with plasterboard or OSB panels, painted, wallpapered, overlaid with artificial stone. And hide the wiring inside.

Imitation of real timber in the living room

Floor installation

Before starting finishing work, be sure to think over the design of a house made of timber: the interior decoration of the house directly depends on the project. Based on it, the cost estimate is calculated.

A conscientious construction company has specialists in 3D interior design, estimators, and experienced installers. They will quickly and efficiently fulfill all your wishes, making your dreams come true.

Installation starts from the subfloor. Regardless of the selected finishing materials, the surface of the lag is first treated with protective impregnation from moisture. A heater (mineral wool or polystyrene) is laid between them. Then a chipboard or OSB substrate is attached. And on top of it, a finishing coating is already being laid. It can be a natural board, linoleum, laminate, parquet or artificial stone.

An additional plus! A double floor will help keep the heat in the house.

Popular flooring

In a wooden cottage, the floor is often laid with a planed tongue-and-groove board made of pine or spruce. It is not demanding to care, it retains its original appearance for several decades. And when it gets dark, you just need to sand the top layer and re-coat with a protective compound.

Tongue-and-groove board without varnish

On our website you can find contacts of construction companies that offer home finishing and insulation services. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

The only contraindication is the device of a warm floor. This is a fire hazard and impractical, because most of the energy will be spent on warming up the tree.

Laminate and parquet conduct heat well. These coverings are similar in appearance to a plank floor, only with a more interesting pattern. You can create an original pattern from parquet planks. And the laminate is strong enough, it is not pressed through from the heels and legs of the furniture. Imitates different types of wood, metal and stone.

Stone imitation laminate in a wooden house

Artificial stone on the floor ennobles the interior. It is best to lay this material in the bathroom, hall or kitchen. To keep your feet warm, you need a heating system. The main advantage of the stone floor is its durability and unique pattern. With this design of the floor, plaster and stone are required on the walls and ceiling.

Artificial stone on the floor looks luxurious

Linoleum is the most budgetary imitation of wood. Its service life is not more than 10 years, so it is often laid as a temporary coating.

wall decoration

Wooden walls are first impregnated with an antiseptic, and then treated with varnish, paint, mastic or oil. Choose a solution based on the expected effect. If you need a tinted matte surface, then mastic or acrylic paint is suitable. For an elegant gloss, the timber is coated with oil or varnish. The texture of the wood does not change from such solutions, but moisture is not terrible in the coming years. Wax-based mastic has a porous structure that allows air to pass through, and oil gives a beautiful golden sheen.

When the impregnation has dried, the finishing of the house from the profiled timber from the inside begins. For lining you need a wooden crate. In the intervals between the slats, steam and heat-insulating sheets are laid. The boards themselves are nailed to the rails along the edges. And they are connected to each other with the help of grooves. You can arrange the lining vertically, horizontally or diagonally. If you combine these methods, you get a unique pattern.

Lining on the wall is ideal in a wooden house

The lining is made from different types of wood (spruce, pine, aspen, linden, alder). This affects shades, heat resistance and strength. You should also consider the class of the material:

• C-class is of low quality (with gaps, dark spots and knots);
• B-class of average quality (knots come across);
• A-class of high quality (there are knots, but they look aesthetically pleasing);
• extra class (ideal material without defects).

The lining has a popular variety called block house. Planed board, the outer side of which imitates a beam or log. Side fastening in the form of a groove securely connects the parts together. They are laid horizontally, starting from the bottom up. Made from coniferous wood. Ideal for finishing walls made of low-grade profiled timber. Does not require additional protection.

Block house cannot be distinguished from a rounded log from afar

Another finishing material that builders like to use to finish a wooden house from a bar is drywall. It is versatile, inexpensive and easy to install. Mounted on aluminum or wooden profiles, which are easily screwed to the timber. In the free space, you can lay insulation and hide electrical wiring. The sheets themselves are mounted with self-tapping screws. Then plastered and applied top coat. For example, wallpaper, self-adhesive paper, ceramics or paint. From drywall create niches, arches, shelves in the wall, if there is such a need. The design is from 10 cm thick, so it is better not to use this material in a small room. But as a partition - ideal.

Unusual drywall arch

Siding and plastic lining are also actively used in finishing work. These materials are cheaper than natural wood, and the texture is very similar to it.

Siding panels are mounted horizontally. You can choose the color and texture to your taste: wood, brick, metal or stone.

Plastic lining (PVC panel) with a standard width of up to 10 cm, and inside it consists of honeycombs. Air voids improve thermal insulation in the house. The vinyl surface does not require varnishing, is not afraid of moisture and the sun, and its coloring is amazing - from monotonous white to bright flower bouquets. A plastic lining is mounted on a metal frame. This material is suitable for corridor, bathroom and living room. You can sheathe the entire room or just the basement.

Bathroom cladding with PVC panels

Artificial stone is made from essential resins and natural chips. It looks like the real thing, but is cheaper and lighter in weight. It is identical in texture and color to marble, crushed stone, brick, shell rock, granite, etc. It is attached to the crate with special glue. Combines well with chalet-style stucco. It is better to entrust the installation to professionals, then the tiles will be glued without gaps and will last a long time. Decorative stone is suitable for accenting in the bedroom, living room, hallway and kitchen.

Stone accents in the living room

These are the main materials for finishing a house from a bar inside. They create an interior in old Russian, classical or modern style. For the ceiling, a stretch fabric will be an excellent solution. Matte film will fit even into a country room. Drywall or lining is also often used in a wooden house.

Prices in Moscow for interior decoration of the house

What budget should the owner of a wooden house expect for a construction company to complete the interior decoration? It all depends on the complexity and volume. On average, an assembly team in Moscow asks for 80 rubles per sq. m. for applying one layer of impregnation. m., oils - 100 rubles / sq. m, varnish or wax - 150 rubles / sq. m. Painting a log house from the inside will cost 200 rubles / sq. m. m. Plus the cost of the solutions themselves.

Installation of an aluminum frame for any finishing panels - 300 rubles / sq.m. Sheathing the room with drywall - 300 rubles / sq.m, vinyl siding or panels without insulation - 600 rubles / sq.m, and with insulation - 700 rubles / sq.m. Plus the material itself.

Video description

What and how much in the decoration of a wooden house - look at the video:

Installation of block-house panels is a little cheaper - 450 rubles / sq.m. without taking into account the crate and related work.

The cost of gluing artificial stone to the wall is at least 1200 rubles / sq.m, but this is if the surface has already been prepared. The cost of turnkey work is at least 10,000 rubles / sq.m.

Laying a tongue-and-groove floorboard will cost 600 rubles/sq.m., including joists, parquet without polishing - 600 rubles/sq.m., laminate or linoleum - 250 rubles/sq.m.

Ceiling lining with clapboard costs from 500 rubles / sq.m, plasterboard - 450 rubles / sq.m. And the installation of a stretch PVC fabric will cost from 550 rubles / sq.m without taking into account the material.

Video description

An example of a designer finish of a house made of timber, see the video:

Unusual options for finishing a wooden house

Even from the usual materials, you can make the original design of a wooden house inside. Like, for example, a ceiling made of lining with carved elements.

Carved lining ceiling

Or the silhouette of a Japanese stone tree on the wall. The plinth is covered with the same tiles

stone tree on the wall

Parquet in skillful hands is a real work of art. No carpet needed

Unique parquet pattern

Conclusion

A wooden house in itself creates an atmosphere of comfort and unity with nature, and modern finishing materials help to maintain it. The main thing is the professional and high-quality performance of work on the interior decoration of the house - then the next repair will not be needed soon.

- interior decoration of the walls of a wooden house from a bar with plasterboard

Nowadays, the construction of wooden houses, their interior decoration are becoming especially popular. They are attractive for their qualities, such as environmental friendliness, aesthetics, comfort of living in a good wooden house. As an example - compare your personal feelings from being in a brick house or a house made of wood. I'm sure that
The second option will be chosen by the absolute majority. But when building a house made of wood, it is necessary to take into account some factors on which the durability of the structure and the convenience of your stay in it depend. And now we will consider in more detail, a rather important issue - this is the interior decoration of a wooden house.

1) Features of the interior decoration of the walls of a wooden house made of timber

Proceed to the interior decoration of the walls of a wooden house from a bar should be only after a more detailed study of the technology, methods and their advantages. It is very important that the interior finishing materials let air through. In a wooden house, this must be taken into account not only for interior decoration, but also for exterior. If finishing
sheathing materials will not let air through, there will be an elementary greenhouse effect in the premises of the house. To avoid this and ensure a normal microclimate in the house, then you will need to make additional forced ventilation. This will require additional cash costs from you and an increase in the volume of construction and finishing work.
The second important point when arranging the interior decoration of a wooden house is to use light finishing materials. This will help to avoid additional load on the walls and foundation.

2) When can I start the interior decoration of the walls of a wooden house

Finishing a wooden house can only be started after the final active shrinkage of the wooden frame. Be sure to consider the material from which the house is built. A more accurate end of shrinkage will depend on the average air temperature, humidity and climatic features of the area.
Final shrinkage of walls from:
– glued laminated timber – after 3-4 months
- ordinary timber or logs - after 1 year

You can start finishing the interior walls only after they are completely caulked.
Caulking of walls is carried out in two stages:
- the first caulking of the walls of the house should be done 4-6 weeks after the assembly of all
walls.
- the walls are caulked a second time in 5-8 months.
For caulking walls, you need to prepare a heat-insulating, sealing material. Usually they use tow or jute. Having started caulking the walls of a wooden house, it is necessary to do this simultaneously from the inside and from the outside of the walls. Having finished the insulation with caulk on one side, you must immediately move on to the other, you must do this immediately to avoid possible warping of the walls.

When all the insulation work is completed and the walls are caulked on both sides, then the building itself rises a few centimeters. After some time - up to two weeks, the height will become the same and at the same time the material of the caulk will be compacted. This ensures a tight, complete fit of the caulking material to the logs, thereby increasing the thermal insulation of the house and necessarily preventing drafts.

After complete shrinkage of the walls, after caulking, for good insulation, you can go through the sealant along all the seams over the caulking.

3) Preparing the walls before finishing

Before you start the interior decoration of a wooden house, look at how the walls are stacked. If everything is done carefully, no insulation sticks out of the joints, then it is possible that wall decoration is not needed in any rooms. And it would be better to avoid spending money to apply high-quality paint and varnish products, while maintaining a peculiar flavor in the interior of a wooden house.

4) Interior decoration of the walls of a wooden house from a bar: options

Best for finishing wooden walls inside the house are suitable:
- wall decoration with clapboard (various colors and shapes)
- wall paneling
- wall cladding with plasterboard
Under all of the listed materials, it will be necessary to make a frame over the entire surface of the walls. Make a base, frame, preferably from wood. Wall cladding on the frame has the following advantages:
– no need to level the surface
- creating a gap for air circulation (this is very important for a wooden house)
- Allows additional thermal insulation.
When performing the interior decoration of a wooden house, it is important to leave a gap between the ceiling. It will be necessary, given the various deformations and possible microshrinkage. The width of the gap is from 2 to 4 cm, it can be closed with a decorative ceiling plinth.

- interior decoration of the walls of a wooden house with clapboard

When decorating walls with clapboard, it is possible to use material from various types of wood, various types of clapboard. Divide the lining along the transverse profile.

Fasten the lining in several ways:
- on clamps
- on self-tapping screws or nails at an angle
- on nails in the face (not very practical due to aesthetic reasons)
The first two methods of fastening are quite laborious. Fasteners are nailed so as not to damage the front surface of the lining. For interior wall decoration with clapboard, a construction stapler with staples is also used, using staples with a narrow back and long legs. All fasteners used must be made of stainless steel.
Lining made of wood, as well as wooden walls, allows for the possibility of shrinkage. To avoid this, chamber drying material should be used.

- interior decoration of the walls of a wooden house with wall panels

A very good finishing option and a great opportunity to diversify the interior and create your personal and unique look in the room. It is widely used by designers for additional opportunities in the design of residential premises.

The interior decoration of a wooden house made of timber with wall panels can be of different types:
– plastic
– wooden
– MDF
– bamboo
- leather
When fixing the panels themselves, it is required to follow the manufacturer's recommendations. The cladding is attached to the crate of the wall surface. Depending on the material of the panels, the mounting methods are quite diverse, so before purchasing the selected material, you should familiarize yourself with its features.

– internal finishing walls wooden at home from timber drywall

Application for finishing drywall is quite common. Pretty light material, simple installation of the panels themselves and the price that is quite affordable for a simple consumer. When choosing drywall for interior wall decoration, follow these recommendations:
– Drywall material is not durable and can be easily damaged. finishing
drywall is recommended to be used no earlier than 1.5-2 years after
building a house.
– Care must be taken to ensure that the material does not become wet or excessively damp.
- If the walls are finished with drywall immediately after construction, then you should
fasten the sheets to the floating frame, then the finish and the base will shrink during shrinkage
move separately and this will not damage the surface.
– To prevent the opening of joints or cracks in problem areas, it is necessary
will glue them with a reinforcing mesh made of polymer material.

In the manufacture of a frame for attaching sheets, it is recommended to use slats and bars made of wood. The use of a metal profile will require a waterproofing device - the rules for using different materials with different moisture properties and characteristics require a waterproofing device.

Immediately after the completion of the construction of a wooden house, it is worthwhile to forget for a while about the implementation of interior decoration, as the building will shrink for some time, this can adversely affect the finishing materials if they are used for their intended purpose before a certain period. Finishing in the interior of a log house should be carried out based on the characteristics of this kind of building. The interior decoration of a wooden house can be made using the same materials that are used in a conventional brick house. However, wood has some features that should be considered when finishing.

An obligatory stage after the construction of a house from a bar is its interior decoration.

There is an opinion that the shrinkage of the building is completed 2 years after the completion of construction, but this is not entirely true - shrinkage can continue for 6 years. This process entails a decrease in the height of the walls, which can reach 3 cm. If plaster was used for finishing, it may become cracked, moreover, individual elements of the layer may move away. If you want to finish the interior space of the house as soon as possible after the completion of the development, you should prefer glued laminated timber as a material, it guarantees the completion of shrinkage processes a year after the start of operation of the new house.

Features of finishing the walls of a wooden house inside

In order to increase the protective properties of the tree, it must be treated with an antiseptic.

Wood is a good finishing material, for this reason, the surface of the walls in the premises can be left unfinished if they are free from obvious flaws. However, the tree will have to be treated with the appropriate composition, which will help give the surface of the walls the necessary shade. Some owners do not adhere to such a design of the premises of a log house. Regardless of which method of wall decoration you prefer, their surface will need to be coated with an antipyretic and antiseptic. If these requirements are neglected, the wood will soon become unusable.

If the finishing process is supposed to be carried out in a house that was built more than 6 years ago, any materials can be used for work, and for new buildings it is not recommended to use finishing materials that do not tolerate deformation processes, among them can be distinguished, for example, tiles.

Interior decoration of wooden houses is also carried out by means of paint, which is able to decorate surfaces and additionally protect them from external influences.

Surfaces in the house can simply be plastered. In this case, special attention should be paid to waterproofing. Plastering walls is not recommended in a newly built house; such processes can be carried out no earlier than a year after the completion of the building.

If the walls in the log house have an unpresentable appearance, their surface can be lined with a block house or clapboard. Such materials are able to decorate the premises with the natural beauty of wood. This method of finishing is also recommended to be used only after shrinkage of the building. Initially, it is necessary to equip the frame system, on which the trim panels will then be installed. This approach will somewhat reduce the useful area of ​​\u200b\u200bthe room.

The inside of a log house can be finished very traditionally - with the help of wallpaper. Such a coating requires a flat surface, which can be achieved by installing drywall sheets. This option can be considered one of the most common and universal among the rest. After installing drywall sheets, their surface must be leveled with putty. The GKL base can be covered with paint instead of wallpaper. Drywall shows its versatility in that it is even permissible to lay tiles on it.

If the conditions in the premises are characterized by high levels of humidity, drywall can also be used to finish such rooms, but it is worth choosing a moisture-resistant type of this material, its sheets can be distinguished by a greenish tint.

The log house has many important advantages over traditional buildings. Among them is the ease of installation of communications. Wires and pipes can be run in the space between the main wall and the drywall sheets.

If the finishing of a house from a bar will be carried out with drywall, then this material can be used in tandem with a heater.

Features of finishing the ceiling of a wooden house

Finishing the house in the ceiling area can also be done using drywall. It is permissible to use seamless tiles, stretch ceilings or plastic panels.

Wooden beams on the ceiling emphasize its naturalness.

Drywall will provide the house with a ceiling that has a multi-level design. This type of coating can be combined with wooden beams, which will emphasize the naturalness of the building. For ceiling sheathing, products based on chipboard, fiberboard or plastic can be used; in the latter version, the finishing material can be represented by polystyrene tiles.

If you want to save money, then the log house in the ceiling area can be equipped with plastic panels. Such products are quite simple to install, and choosing a specific shade from the huge palette presented by stores is quite simple. The advantage of this finish is also easy maintenance. The panels fit perfectly into the kitchen or bathroom. If you need a more durable finish, then you should prefer the upholstery of drywall sheets to PVC panels.

The surface of the ceiling can also be sheathed with wood if you are an adherent of everything natural. A lining can act as such a finish. When attaching it, you should use the same technology that is used when mounting this material on the walls. If the house, which is based on timber, needs to be given a higher degree of heat and sound insulation, then before installing the finishing material on the frame, it is necessary to install a slab insulation, the size of each sheet of which should be equal to the distance between the elements of the crate or several millimeters more.

To carry out finishing work in a wooden house, you may need the following tools and materials:

• antipyretic;
• antiseptic;
• putty;
• drywall;
• wallpaper;
• wood for lathing;
• lining;
• wallpaper glue;
• capacity;
• brush;
• roller

Features of the arrangement of the floor

A wooden house can be equipped with almost any floor finish, it can be laminate, ceramic tiles or, for example, parquet. If a water heating system is used, it is not recommended to combine it with parquet or solid board, which do not tolerate temperature changes and have low thermal conductivity. The most common option for a private house is the base on the logs. The main thing to be done when arranging the floor in this case is to eliminate vibration and insulate well. For wooden houses, the most recommended flooring is a massive board made on the basis of natural wood. Often used are parquet, laminate and cork, the latter of which is a modern, natural, environmentally friendly material that can provide the floor with additional insulating characteristics.

When finishing, a wooden house has many advantages compared to traditional buildings, due to the fact that walls, floors and ceilings do not need to be insulated as carefully as in the case of brick houses. Since wooden houses are much warmer.

Fashion trends in decorating a house from a bar.

1. Features of log houses regarding finishing work.
2. Interior decoration with wooden clapboard or block house.
3. The use of decorative stone in the decoration of the house.
4. Features of creating a fashionable interior with drywall.
5. The secret of preserving naturalness is in the interior design.
6. What is the best way to make a floor.

Bruce is one of the best solutions

which you can only choose, dreaming of a beautiful and comfortable home. But only a luxurious exterior is not enough, it is necessary that the interior of the dwelling correspond to the same high bar, which is why decorating a house from a bar inside requires a thoughtful and subtle approach. For such a structure, it is important to achieve integrity and harmony, so not every style of the interior and not every material will be appropriate. Finishing a house from a bar inside

Modern trends in the interior design of timber houses

Today, designers offer a variety of materials that can be used for a house made of timber, without violating the favorable atmosphere that is characteristic of structures made of natural materials, and without spoiling the unique microclimate that reigns in them, providing comfort and coziness. The most common include:

• natural and decorative stone;
• wooden lining and block house;
• drywall, which is then covered with finishing material that the owners like.

Modern trends are increasingly leaning towards interesting combined options. For example, wall cladding with plasterboard covered with discreet background wallpaper and accenting inserts made of decorative stone. In principle, you can implement a wide variety of solutions, give free rein to your imagination or look at the options, for example, in the photo presented in large numbers on the Internet. Finishing a house from a bar inside

The main thing is to decide on the style. If we are talking about a spacious country cottage, then it can be done in the best traditions of "country". And if you are talking about a small country house, then wanting to equip an unusual place for a good rest with both body and soul, you can give preference to Japanese traditions.

Features to consider before starting work

Regardless of what finishing materials will be used in the future, it is necessary to learn that wooden buildings have a shrinkage period, and until it ends, it is not recommended to start working on the interior. Shrinkage takes place in two stages:

• primary. It can last from 2 to 5 years from the moment the construction of the building from profiled timber is completed, and a year or two if glued timber is chosen. It occurs due to the drying of the material, which gradually leads to a decrease in the volume of the bars and, at the same time, a decrease in the gaps between them. In total, the floor can become three centimeters lower, which is not very noticeable in a structure without finishing and is specifically manifested on surfaces lined with decorative coatings (tiles come off, cracks appear, plaster crumbles);
• secondary. It is not as pronounced as the first one, most often it does not lead to serious damage to the decorative design. The reason for it is fluctuations in temperature and humidity of the wood itself.

Before finishing the walls from a bar inside the house, they must be “caulked” without fail. It is needed in order to provide thermal protection (prevent drafts, prevent cold air from “coming in”), that is, to help maintain heat and comfort in the premises. By "caulking" is meant the high-quality filling with fibrous insulation (jute, tow) of all the cracks and gaps formed between the bars. Finishing a house from a bar inside

Finishing a house from a bar inside using a block house or wooden lining

The most used for interior decoration of a wooden house today are wooden lining and block house. First of all, this is due to the proximity to the main material of the structure in terms of qualities and characteristics. This is the most harmonious solution that will allow you to be as close to nature as possible, to create a unique and healthy microclimate indoors.

Finishing under a bar inside the house has a number of undeniable advantages in comparison with other options:

• she has a presentable appearance;
• she has natural beauty and charm;
• harmonizes in general with the residential ensemble;
• has an absolute ecological clean;
• designed for a long service life;
• during operation, the material can be refreshed by opening it with varnish, and it will again acquire a spectacular and radiant look. In the future, specific care is not required for the varnish surface;
• has an affordable price.

By equipping the lining panels and the block house, which is its special variety, with a tongue-and-groove lock, any owner will be able to equip his home inside with his own hands. Ease of installation will significantly save the family budget due to the fact that it will not be necessary to involve specialists in the work and pay for their expensive work. Finishing with imitation of timber inside the house can be used for bedrooms, living rooms, halls, dining rooms, but it is advisable to choose a different design for rooms with high humidity.

Decorative stone in the interior of wooden houses

An excellent solution can be interior decoration with decorative stone. Natural materials are in perfect harmony with each other, and stone inserts look attractive and natural. This combination has been chosen for centuries, and today it has not lost its relevance due to the many positive aspects:

• aesthetics and presentability of the interior, the ability to implement original and unusual ideas;
• high strength of the material, which is not afraid of moisture, pests, mechanical damage;
• durability;
• ecological cleanliness;
• resistance to dirt, grease, ease of care.

It is also possible to do the arrangement yourself, but you need to take into account that if you choose a natural stone, then you do not need to perfectly level the surface, and when using an imitator (decorative element), the walls should be even. Finishing a house from a bar inside

Is it appropriate to use drywall

You can implement the most daring and original ideas and apply the desired interior style, making the room cozy and comfortable, but at the same time fashionable and interesting, using drywall for finishing inside a wooden house made of timber. Its use is possible for walls, ceilings, and with its help the geometry of rooms can be easily changed, and the ability to equip many installations will give you a chance not only to give original and fashionable touches to the interior, but also to achieve room ergonomics.

The material is light, safe for health, inexpensive. For its installation, a crate is installed, thanks to which the drywall does not come into contact with the tree, which does not allow cracks to form as a result, saves both the walls and the sheathing, under which all communications are conveniently hidden (electrical wiring, water pipes, etc.). A layer of insulation is also placed under the drywall, which is simply priceless for living in the cold season. Finishing a house from a bar inside

Sheathing made of this material is especially convenient because it allows you to realize any design ideas. Any background paint perfectly fits on sheets covered with a thin layer of plaster, and decorative elements made of decorative stone (for example, they effectively decorate corners, highlight the wall around the fireplace) or wood (panels, etc.) can become an interesting and fashionable accent.

The only point: you cannot cope with the installation of drywall without outside help, you need to involve a specialist who has experience working with this durable, but at the same time fragile material.

How to design an interior that is as close to nature as possible

Often, the owners leave the walls without significant changes, trying to preserve the naturalness of the building as much as possible. This is especially true of country cottages and small country houses, which are designed for summer holidays. For residents of megacities, this is really a great opportunity to retire with nature and protect themselves from the bustle of the city. Finishing a house from a bar inside

Treated wood is an excellent finish in itself, retaining all the best properties of natural material and creating a unique, healthy microclimate that promotes inner harmony and tranquility. Together with the walls, it has become fashionable to leave natural wood ceiling beams open; they will become an element of decor, which is especially appropriate if the country house is designed in country style, Provence or made like a “hunting lodge”.

Such decoration of the house from a bar inside is done by hand and does not require special skills and professional tools. It becomes mandatory to pre-treat all wooden surfaces with antiseptics that prevent wood decay from contact with moisture and vapor, as well as repel pests.

If there is a need to slightly shade the color of the timber, it can be covered with stain. The only caveat is that wood tends to absorb the finish well and can change its color a little more than you want, so you need to test it on a small area of ​​the panel first. Finishing a house from a bar inside

Further, in order to make wood surfaces more spectacular and attractive in appearance, they are varnished, giving a mysterious sheen and performing an additional protective function. Coloring is also appropriate if the owners want to get a certain color scheme.

What can be done to decorate the floor

For the design of the floor, all floor coverings offered by modern manufacturers are suitable. The use of a wooden board is called a classic, but at the same time, it will be appropriate and in harmony with both the log house itself and with any finish:

• parquet;
• laminate;
• linoleum;
• ceramics;
• cork cover.

As you can see, a lot of interesting options are provided for decorating the interior of a log house, it remains only to choose which one you like for you.