However, not everyone knows how to privatize their buildings and chests. As a result of this, any player easily takes resources, a house from such people. Many get upset and leave the servers, but in this article we will tell you in detail how to privatize a house in minecraft.

Private house on servers in Minecraft varies, but there are no significant differences, so let's start private house in Minecraft.

How to privatize a house in Minecraft on a server?

1. First, we need to choose the territory that we will privatize.
2. Then we run to one of the corners, and start digging under ourselves - we need to dig to the lowest point of the desired territory. However, you should not privatize before bedrock, as a rule, private on servers is limited. In this case, you may not have the desired area. Therefore, it is worth stopping at 6-8 blocks of stone.
3. As soon as we dug, we write the command / rg pos1 ( pos1 is required to be written together !), after which we return to the top and run to the opposite point, located at the other end of the private.
4. We climb to the desired height. Lock in height as high as possible - as much as the size of the private allows.
5. After reaching the required height, write / rg pos2 (pos2 must be written together!).
6. Next, we need to write / rg claim region_name. The name must be written in English letters.
7. If the private has not been created, instead of /rg claim, you should write /rg create region_name
8. In such a simple and uncomplicated way, we were able to privatize the territory. Furnaces and chests are privatized at the same time as the region, additional commands do not need to be registered. But still it is better to ask the server administration on which you are playing!

How to privatize a house in Minecraft?

Assigning a region is much easier - it varies on some servers, but the principle is simple.

• Enter /rg delete region_name or /rg remove region_name.
• After that, all buildings are privatized and everyone can break them. However, be careful.
• If you privatize, any other player can privatize!

That's all, in this article we have analyzed how to privatize and privatize a house on a Minecraft PE server!

Today let's look at some of the nuances that arise in the process of studying and playing directly in this interesting world! More precisely, you will learn how to secure a territory in Minecraft from other players, and what commands are available for this. We hope that our advice will help you find answers to all your "unbearable" gaming questions, and you will be able to play calmly, not paying attention to the behavior of other users.

Introduction

Unfortunately, some players do not behave quite adequately in online games, and therefore, sooner or later, all real-time crafters are wondering how to protect their gaming area from attacks and encroachments of other fans. There is only one answer - to make your gaming territory private and play quietly on. But how to carry out the “privacy” procedure, and what will this gaming privilege give us?

Please note that some of the servers allow you to "lock" not only large gaming areas, but also individual elements of the game. For example, you can protect your chest with inventory or resources from "enemies". The good news is that the chest does not have to be in the territory that was "privatized" by you. This action is also possible on the territory of other users, or in the general area of ​​the game.

You also have the opportunity to make a lock and private doors. This feature will allow you to restrict access to your home without resorting to "privatization" of the entire site, or in order to prevent access to the home of friends who already have the right to play in your private zone.

What is a private region?

First of all, remember that a private region, or "private" for short, is a crafter's personal playground, on which, according to the rules of the game, only the owner can carry out actions. This territory is freed from the encroachments of mobs, creepers, griefers and other "interesting" charms of the game. If desired, the owner of a private region has the opportunity to:

1. modify the initial settings of the private;
2. invite, give access and delete friends;
3. change the game parameters by entering the appropriate commands in the chat.

As you can see, private is a rather interesting addition to the main game. Enabling this feature is fairly easy. In addition, you can always remove the private area or simply reverse the procedure to give everyone access to this playground.

How to private in Minecraft?

We figured out why you need a private zone. Let's now look at how to privatize a territory in Minecraft. Let's start with the simplest - make your home personal (private).

In order to make the chosen dwelling a private zone, you will only need one tool - a wooden hatchet. With it, you can mark the coordinate points (corners) of your future personal territory. It is not necessary to create an ax: you will need the “//wand” command in the game chat. If someone does not know or forgot, for this you need to press the "T" key on the keyboard and open the chat. As a result, the ax will appear in stock in your inventory.

The next step is to determine the boundaries of the future personal zone. To do this, in the corners you need to put any block (cube). Pay attention to the size of the blocked zone you have chosen, because very often there is a limiter on the servers. If you select a zone larger than the limit, you will be shown a message about exceeding and an error.

So, the first block (dice) has been set, but it is desirable to make a strategic reserve - three more blocks at the upper and lower coordinate points are enough. In essence, you first select one lower point, and then diagonally opposite the upper point. For example, if the lower coordinate is placed in the right corner, then the second point will be the upper left corner.

Well, we figured out the basic rules, and now we move on to the direct private procedure. We select a wooden hatchet in the inventory, go to the first point we have chosen (the corner of the future private zone) and, by clicking the mouse button (left) on the block, we designate the first corner. You can also carry out and prescribe these actions directly in the game chat. To do this, stand on the initial block and type "/pos1" in the chat. A program message with the coordinates of the first point should appear on the computer monitor.

We carry out a similar procedure with the opposite coordinate point of the future private territory, only in this case you need to right-click. In chat, the command will look like this "/pos2". Recall that the chat is called on the screen using the "T" key. Do not be surprised that the program message in this case has two brackets. In the second bracket, you are shown the number of blocks that the private area will consist of.

Note! If the server has a limit on private zones, then exceeding this figure, you will most likely receive a software error message as a result.

Now the private area has been selected and marked - it remains to give it a name, as well as register a personal site. To do this, in the chat (key "T") type the command task "/ rg claim<название участка>". You can also use the more advanced option "/ region claim<название участка>". Remember that the name of the private zone in the directive is entered without brackets. As a result, you will receive a message in the chat about a successfully installed region with the selected name.

How to find out the name of a private region?

There are cases when a player or minor owner forgets the name of his private zone. In such a situation, the following steps must be taken:

1. create a stick using a workbench;
2. we get up in the privatized zone and take a stick in our hand;
3. on one of the blocks included in the private, right-click: the chat will display the name for you.

There is also an alternative option, for this, in the same chat, you need to enter the "/rg list" directive.

How to add or block a friend in the private zone?

According to the rules of the Minecraft game, a private area is a player's personal playground. In order for your partner to still play in your private zone, you need to carry out an access procedure for him. Again we turn to the chat and enter the command task "/ region addmember [name of the private territory] [name (nick) of the player to be added]".

There are times when a friend who has gained access to your territory begins to interfere with your enjoyment of the game: breaks and steals your things. Then it is better to block such a "friend". To block an annoying user, enter the following directive: "/ region removemember [zone name] [nickname of the gamer to be removed]".

We remind you that all commands are entered in the chat. Please note that you can only delete friends individually, you cannot delete a group of users. To obtain complete information about a private zone, you must enter the command "/region info [private name]". The monitor will display information about the owner of the territory, the type and priority of the site, the list of allowed users.

Flags for private in Minecraft

Recall that a private region is the territory of a crafter who has the right to either use the set private parameters or change them at will. That's what flags are for. Note that flags can be used to either allow or prohibit certain activities on your territory. Keep in mind that the ban will apply not only to authorized users, but also partially to you, as the owner of the zone.

How to apply them? To apply the flag, you need to enter the following directive in the chat: "/region flag [private region name] [flag name] [option]". The parameter can be either "deny", in which case the action is prohibited, or "allow", in which case the action is allowed. The value "none" indicates that the effect of this flag is undefined.

The following flags exist in the Minecraft game:

Commands for private territory and other actions

We hope that our tips have helped you, and you will play the Minecraft computer game with even more enthusiasm!

Video

We are waiting for your comments, feel free to write!

HOW TO PRIVATE A TERRITORY IN MINECRAFT [Guide]

Hi all. Today we will talk about a very important process, namely, how to privatize territory minecraft. At least the server (like the majority) must have the WorldEdit plugin installed, or its analogues.

How to select a region in minecraft

There is nothing difficult in this procedure if you understand what is at stake. There are several ways to select a region. Most popular with a wooden hatchet. To get it you need to write to the chat //wand .
now you need to select two diagonal points with this hatchet:
1. Select the lower point of our region with the left mouse button, and then move the highest point and place a block (if it is air), press the right mouse button. Strictly 1 time. If coordinates appear after your actions, then you are doing everything right. But, look at the picture below, this is an example of a private house.

The purple cube is the highest point, and the green one is the lowest. That is, a certain diagonal passes. Remember? Move on.
Next, we write 2 commands in the chat:
// expand 20 down // expand 20 up So where down - marks 20 cubes down, and where up - then 20 cubes up. You can write height and depth (numbers) for yourself.
Many probably think: why mark in depth and height if there is a floor and a roof. The answer is simple: there are griefers who will dig a hole under you for example or something. and so you protect your home completely from everyone.
Another equally easy way to secure the territory.
We get up on a low point and write to the chat //pos 1, go to the high point and write //pos 2. They mark the region in the same way as the hatchet, but only in teams. And the main plus, where our sight is directed, will be noted.
Rule number one: select points, only diagonally.

We will privatize the territory

We have decided on the territory, allocated it, and now it must be privatized. To do this, we need to register in the chat /rg claim name(name of your private). That's it, we've created a restricted region. We can also add co-owners and so on. Rule number two: do not add the first players that come across to the region, they can be griefers.
To add a co-owner, you need to write to the chat:
/region addowner name_of_our_region friend_nick1 friend_nick2 This way you have added two co-owners to your region. Now we need to remove these two co-owners. Then write to the chat:
/region removeowner name_of_our_region friend_nick1 friend_nick2

Protection of a private region (private)

To fully protect the private, you need to set flags - some restrictions on the functionality while staying in the region.
Flags are edited by the command
/region flag region_name flag_name value Total values ​​3:
deny - denied allow - allowed none - not specified Flags:
Pvp - prohibits / allows an attack on you. Sleep - prohibits / allows sleeping on the territory. Creeper - explosion - disables/allows creepers to explode. Lighter – prohibits/allows the use of a lighter (including the owner) Lava - flow – prohibits/allows pouring lava Potion -splash - prohibits/allows damage from potions Water - flow – prohibits/allows the use of water Ghast-fireball - prohibits/allows the use fireball Use - prohibits\allows the use of mechanisms, good protection against griefers Chest-access - prohibits\allows the use of chests An example of a command to disable the use of chests:
/region flag House chest-access deny By setting the flags correctly, you can protect your house from any griefer or PvPshnik.

How to check the territory for private

To check if a region is locked, region name in minecraft and other information about the region, you should take a stick and hit the block in the territory, after which the information will appear in the chat.

Commands for private in minecraft

These are additional private commands in minecraft
/region delete region_name - delete region Commands for moving or increasing a region. Select a new region and enter in the chat: /region redefine region_name /region move region_name /region update region_name /rg addowner player_nick_region_name - adds a full co-owner AND removes /rg removeowner player_nick_region_name /cprivate - property protection /region list - list of regions This is basic information about the privacy of the region. We tried to cover the topic as detailed as possible " How to privatize a territory in minecraft?"to make it easier for beginners to play minecraft.
And if you still haven't found a client for the game, we offer you

If you don't know how to privatize a house in minecraft, then this article is for you. Most of the players who just got on the server are faced with griefing, not knowing how to lock the house in minecraft on the server.

To make a private in minecraft, first of all you need to know the necessary commands and rules that tell you how to secure a territory in minecraft on a server. You need to have a wooden ax in your inventory, which can be crafted or obtained by entering the //wand command. It is the first thing in order to secure a region in minecraft.

Once you have a wooden ax in your hands, you will need to mark out the area by marking two dots along the diagonal edges. Do not forget that the rules explaining how to privatize a house in minecraft on a server also provide for the maximum size of the territory.

So, we mark our first point

To do this, we approach the desired block and click on it with the left mouse button. There are also servers, in the rules of how to privatize in minecraft on a server, which do not provide for the presence of an ax. In these cases, you just need to enter a specific command (most often it is //hpos1), while looking at the desired block with the mouse pointer. If everything is done correctly, then in the chat you will see a system message saying that the first point is indicated and, in fact, the X, Y and Z coordinates themselves.

Now mark the second point

To do this, select a suitable second block for ourselves and click on it with the right mouse button (if an ax is provided). If not, then looking at this block, we enter the command installed on the server (usually //hpos2). Here, a system notification in the chat should also appear, saying that the second point has been set and, in fact, its X, Y and Z coordinates.

Now you need to know how to privatize in minecraft in the directions up and down.

Immediately after the extreme points were marked, you had a plane in one cube, which needs to be increased in volume. This is very easy to do through the chat, by entering certain commands.

//expand number of cubes up – expand upwards.
And //expand number of cubes down - expand downwards.

Again, and here we should not forget about the restrictions established by the rules in the rules that tell how to privatize in minecraft.

After that, a system notification via chat should also appear. It will tell you that the region is expanded and show the number of blocks occupied by your house.

Further, the region can be given a name

This is done very simply, you just need to enter the command: “/ region claim the name of your choice”.

This completes the privatization of the territory. The marked region is now completely in your will.

You can learn more about the process by watching the minecraft video how to privatize a house.

To verify the success of the perfect process, you will need any other player on the server. It is enough that he simply tries to destroy one of the blocks in your new territory. If he fails, then you did everything right, because other players do not have the right to do something on your site.

If you play on the same server with a friend, or just found a game mate and want to live with him, or at least just give him the rights to act in your house, then you can do this with a simple command: "/region addmember" the name you have chosen for your territory and the name of the character you are going to add."

To remove it from your zone: "/region remove name character name".

Delete private: "/ region delete name".

The house, having obtained and accumulated many different materials, installed everything necessary for life in it, for example, a bed, a TV set and other interesting items, it is only natural that you want to protect them from attacks by other players.

It is very important to ensure not only the safety of the house, but also to prevent the opening of chests and theft of diamonds. Naturally, all this can be hidden, surrounded, and housing can be built in a hard-to-reach place. But the most effective method of protection is the privatization of territories.

What you need for private territory in Minecraft

To privatize anything, you need an axe. To make it, you need to put three boards in the crafting window in the upper left corner, and two sticks in the middle cell and the cell below it. This way you will be able to craft a wooden axe. But if you replace the boards with cobblestones, gold or diamonds, you can get a stone, gold or diamond tool, respectively.

How to privatize a territory in Minecraft

To implement a private, you must determine the approximate size of the territory that you want to make private. You should approach the starting point of the area to be privatized and click on the selected block with the left mouse button so that the inscription "First position set" appears on the screen. Next, you need to proceed to the next point and click on the right mouse button. You also need to highlight the top and bottom points.

Minecraft has special commands that allow you to privatize a territory. So, /region define(/region redefine) is used to change the private zone. The /region claim request gives you the option to claim a region for yourself. The inscription /region select selects the region. To view information about , type /region info.

Locked items can be used not only by you, but also by your friends in Minecraft. The /region addowner(/region removeowner) command allows you to change the owners of a region. By adding a friend to this list, you can give him exactly the same rights as you. You can type /region list to see a list of all the territories you have secured.

You can change the size of the attached territory in height using the //expand command<кол-во кубов> <направление>. To select the height and depth of a private, you need to enter the appropriate number of blocks, and to determine the direction, the English words down - down, up - up are used. You can remove a private by entering the phrase / region remove<имя зоны>

Thus, having learned how to privatize a territory in Minecraft, you can safely build beautiful houses, hide the extracted wealth in them, close chests from outside access. You can also form teams with friends and share the use of restricted areas.