Stylish flower pots - do it yourself! Pots for indoor plants Cache-pot in the form of a bucket.

Flower pots differ from flowerpots in the presence of a drainage hole, which allows excess moisture to be removed to prevent the formation of unpleasant odors and rotting of the root system.

Cache-pots perform an aesthetic function and are intended for decoration. Often, pots are placed in them to increase humidity, and moss is laid out between the walls, which slowly absorbs and evaporates water. It is recommended to purchase a pot four centimeters larger than the pot.

The pot should be at least a third of the height of the plant. The diameter is selected based on the size of the crown of the plant: the more leaves, the wider the product. The diameter of a pot for a very tall adult plant should not be less than 1/3 of its height.

Varieties

The choice of flower pots depending on the material of manufacture:

1. Ceramic models are breathable and suitable for growing most plants.
2. Plastic specimens are light, mobile and inexpensive.
3. Glass pots are used for growing orchids, while stone pots are used for massive tall trees.
4. Wooden models will become a separate element of interior decoration, but require special processing.

For an adult, plants acquire specimens one and a half to two centimeters larger than the previous ones. When dividing the roots, you will need smaller pots, and for fast-growing flowers, models with a margin of four centimeters.

Pots and planters in neutral shades will emphasize the beauty of plants. Models of saturated tones focus on themselves. Several monochromatic specimens will unite the interior and emphasize its integrity. A properly selected flower pot is the key to the health and successful growth of the plant.

You can also buy flower pots with delivery from a warehouse in the Russian Federation and the CIS (Moscow, St. Petersburg, Yekaterinburg, Novosibirsk, Minsk, Astana, etc.). If you have any questions, call - 8-800-234-1000 and get a free consultation from our experts.

It is difficult to imagine your favorite garden without flowers, as they are a stylish addition and an integral part of landscape design. Compositions planted in unusual, original pots for plants made by oneself look especially impressive. Creating beautiful flower pots with your own hands from improvised material is not only a useful, but also a very exciting process. A step-by-step master class for making original planters with a detailed description and a visual photo, later in our article.

What can you make a pot with your own hands

Today, specialized stores offer a wide range of various decor and decorations for the garden for every taste, including original flower pots. However, even with such an abundance of goods, it is not always possible to find what you need exactly. There is only one way out of this situation - to try to make a pots yourself.

Oddly enough, but the most unusual decorative flowerpots are obtained from ordinary material. You just need to be smart and give free rein to your wildest ideas and fantasies. Planters from household items will look most harmonious in the garden. It is they who give a real zest to your yard, creating the effect of grace and refined nobility.

The second life of old shoes

Surely in the country you have old shoes that you haven’t worn for a long time, but you didn’t dare to throw them away either. The ideal way to breathe new life into it is to make an original flower garden out of it.

To do this, you need an unnecessary pair of old shoes, the help of skilled hands and a little free time.

Walkthrough

1. Pour fertile soil (preferably black soil) into the bottom of the boot, then plant seeds or seedlings of your favorite plants in it;
2. Pour the resulting decorative flower garden with warm water and place it somewhere in the visible side of the house;
3. To prevent excess moisture from accumulating inside, several small holes can be made in the sole;
4. To give the composition a more interesting look, the boots can be painted in any color you like.

Decorating a shoe with your favorite flowers and plants is a great idea for a creative gardener.

Absolutely any footwear can be used as a mosnov: rubber boots, sneakers, sneakers, sandals, galoshes, low shoes, sandals, cloaks. As for flowers, it is better to give preference to bright, unpretentious, undersized plants.

Important! Planters from old shoes should have holes to drain excess water. Otherwise, the roots may rot, which will lead to the death of the plants planted in them.

Flower pot made of cement, rags and burlap (photo)

A flower vase made of cement and rags looks very original and impressive. The method of manufacturing the product is quite simple and does not require special skills and tools. It is enough to have cement mortar and unnecessary textile waste on hand.

Important! Before drying, a rag soaked in a liquid cement mortar can take any shape, so such compositions can be made in any form.

So, for work we need:

• Cloths of rags of the required size. You can use ripped burlap from cereals or sugar;
• Components for the preparation of concrete (water, cement, seeded sand or fine gravel);
• Patterns made to your taste. You can use ready-made ones, such as a bucket, a saucepan, an old vase, etc.

Step-by-step master class for making planters

1. Cook according to the required proportions. To make it easier to work with the material, the solution should have the consistency of liquid sour cream;
2. Wrap the template around with a dry cloth. If the size is right, dip it in the solution and hold it there for about a minute;
3. Throw a dampened rag over your workpiece and let it dry for 12 hours;
4. After complete drying, remove the pattern. A cache-pot of cement and rags is ready.

Good to know! The setting and hardening time of cement in the sun is reduced to 2-3 hours.

If you don’t like the cold and gray color of concrete, or you are simply tired of it, dilute it with bright contrasting colors, so the planter will look more elegant and more fun.

Miniature garden from tin cans (photo)

One of the most popular materials for making flower pots are tin cans.

• Why are they so popular among art lovers? Everything is very simple. Metal cans come in many colors, shapes and sizes, so you can create a magnificent flower arrangement from them that attracts admiring glances.

The indisputable advantage of making such floral decorations is the minimum return of effort and time while obtaining the most creative result.

To make a planter from tin cans, the following materials are usually required for work:

• Cans;
• Nails and hammer;
• Colored acrylic paints, fly brush;
• Wooden base for fixing jars

Manufacturing guide

1. To give the composition certain outlines, all cans are painted in bright colors;
2. After complete drying, a hole is made in the bottom of the jar to drain excess moisture;
3. It remains to fix the jars to the selected base, pour soil into them and plant flowers.

To add more expressiveness to the product, patterns can be applied to a slightly dried surface or decorated with various buttons, ribbons, beads or beads.

An unnecessary teapot as a flower garden

Found an old kettle in the garage? Don't rush to throw it away. From it you can make a beautiful decoration that will look original in your garden. In addition, the creation of crafts with your own hands will help not only realize your creative potential, but also save money.

To return the product to its original appearance, a can of acrylic or aerosol paint will help. Using a stencil, various patterns can also be applied to the surface of the teapot.

Important! So that the paint does not swell over time, the surface must be well prepared before application.

The planter from the teapot is mobile, and if necessary, it can be moved to another place

• For those who do not want to bother with painting kettle, you can leave everything as it is. The shabby and tarnished shade of metal with a slight touch of time has its own special charm. The cold shine of polished metal looks no less advantageous.

Using an old teapot as a flowerpot is quite a bold and creative decision.

Vase from improvised means: a step-by-step master class

Today, craftsmen and Hand Made craftsmen make original planters with their own hands from almost any material that comes to hand. Ideas for creativity and inspiration can be drawn from anywhere, including the Internet.

The photo of beautiful planters placed in our article proves once again that there is no limit to a person’s imagination. Innovative solutions and unusual super ideas allow you to create real works of art.

• If a wooden sticks glue together into a hollow cube, so that each new row forms a free space, and each subsequent one overlaps it, we get an unusual planter that is perfect for small plants. It can be placed anywhere, for example, on a windowsill or hung on a rope, after planting indoor flowers in it.

• Plastic bottles. Probably not a single garden craft or decoration can do without their participation. Working with this material is very convenient and simple, the main thing is to observe safety precautions. The simplest thing you can make out of is a hanging flower pot.

However, plastic bottles can be used not only for decorative purposes. You can plant seedlings of vegetable crops in them, so this material is also a favorite among amateurs.

• You can weave a flowerpot with your own hands from an ordinary rope. In this case, the shape of the product can be different: cylindrical, round or cone-shaped, the main thing is that the planted plant fits freely into it. As a material for weaving, some craftsmen use thin vine branches or artificial rattan threads.

• If you approach the creation of a decorative flower pot more thoroughly, you can make a more interesting and large-scale composition. Suspended old waste boiler over an impromptu fire of flowers and logs, you can get a very interesting result that will not go unnoticed by your guests.

Important! To highlight and emphasize the beauty of the composition you created, you can protect it with a border of ordinary stones, slightly drowning them in the ground.

Boxes for flowers and seedlings

• Summer residents are resourceful and thrifty people, so they never throw anything away, including cuttings from boards and other lumber. After all, they make excellent wooden boxes which can be used as flower pots.

In order to make planters from boards, you can get by with minimal carpenter skills, and only a hacksaw, nails and a hammer are needed as tools.

• Good to know! Wooden boxes can also be used for planting seedlings of various crops. Only for this, in the upper boards, it is advisable to make special holes for the hands so that they can be conveniently and safely carried.

Beautiful flower beds from old things

Oddly enough, but an old bicycle that has not been ridden for a long time can still be useful to you as a decorative decoration. It is not necessary to violate the integrity of the structure. Just use it as a living flower bed. Additional contrasting elements in the form of flowers and plants will turn an old bicycle into a real masterpiece of art.

Planter from a bicycle - everything ingenious is simple

• Showing imagination, a unique hanging decoration with flowers can be obtained from the usual bird cages. Just place a pot or container with low plants in it and decorate with some decor.

Important! A planter from a cage will look more elegant and noble if you use a decorative vintage cage in the Provence style for it.

• For craftsmen with golden hands, make decorative planter for a summer residence with your own hands in the form of a cart, it will not be difficult. This will require a special tool and certain skills in handling wood and metal.
• To improve your mood and bring yourself a lot of positive emotions, you can quickly and efficiently make flower pots from ordinary trash cans made of shiny metal. For ease of movement, furniture wheels rotating in different directions can be screwed to the bins.

As you can see, having the right material at hand, it is very easy to make a flower pot for the garden with your own hands. For the manufacture of simple products, no skills are needed. Even a child can cope with this task. As for products more complicated, then you can’t do without the help of adults.

The creative process of creating a planter is not only creative, but also educational. Therefore, even the smallest children can be involved in this exciting activity.

Indoor flowers in flowerpots are a wonderful way to decorate an apartment or house, make the room more lively and cozy.

In this article, we offer you interesting ideas on how to make beautiful hanging flower pots using a variety of materials, such as wood, leather, twine and other improvised means.

Also 5 step-by-step master classes with diagrams and photos on how to weave flower pots quickly and easily with your own hands and create a really beautiful interior decor.

Leather hanging planters are easy to manufacture, but look very original. Add some style to your home decor with this wonderful leather planter. It can definitely become exactly the highlight that makes the interior unique.

Master class: leather hanging planter

Necessary materials:

• Distilled (purified) water
• Tracing paper (21x28 cm) and 4 pieces of strong rope (or leather laces), each approximately 90-120 cm long
• Leather dye (optional) and gloves
• Leather (30x30 cm square)
• Packing tape, a simple pencil and a stationery knife
• Computer and printer (for template printing) and template
• Sponge for wetting and coloring

Step by step diagram:

Step 1: Preparation and placement

Print out the hanger plant template on tracing paper. Lay the template down on the wrong side of the leather and choose the ideal placement (not too close to the sides to avoid any imperfections in the leather).

Step 3: Soften the skin

Dip the sponge into the purified water, and then evenly apply moisture to the skin. Repeat this step at least three times until the skin looks like it can't take in more water. This will soften the skin, and facilitate our work on weaving pots.

Step 4: Template transfer

Now place the template in the place you selected earlier and tape it on the sides so as not to move to the side. With a simple pencil, direct the lines printed on the tracing paper by pressing the pencil with medium force. Be careful and don't miss any line.

Step 5. Cutting

Now peel off the template from the skin to see how the design has transferred to the surface of the skin. Using a utility knife, make cuts in place of the lines.

For convenience, you can first cut a circle along the outer contour. The cuts should be clearly drawn along the drawn lines.

Step 6. Coloring

Note: This step is optional, depending on the desired color and materials at hand. In our case, we dyed the skin dark brown.

After the skin is dry from moisturizing (at least one hour), apply the desired dye. Apply the paint with a sponge (wearing gloves) until the desired effect is achieved.

As the skin dries, pull it back a little to give it a voluminous shape. You will start to see the skin deform, keep going pulling and stretching it to create the shape of the pot as it should be when finished.

Step 8: Hang Up

• After, how the skin is completely dry, and a planter shape is formed, punch four holes in the upper part to thread the ropes through them.
• You must place them evenly, at the same distance from each other, so that the suspended flower pot does not then lean to one side.
• Take four ropes (regular or leather) and on each of them tie a knot, tightening it tightly at the end.

Step 9: Decorate and Mount

Add tassels, beads, rivets- everything that is necessary to achieve the desired style in the end. At the top of the hanging cords, gather all four of them together and tie into a knot.

You can use this knot to hook onto a ceiling hook and/or ring. See if the length of the pendant suits you, if necessary, tie the knot at a different level.

Straw hanging planter

This planter will suit the interior with innovative notes. Transform and complete your home decor with their neon cocktail straws and strings. And for this, even 15 minutes will be enough for you!

Necessary materials:

• neon threads
• neon straws (8 pieces per pot)
• flower pots for indoor plants (we used white ones made of melamine)
• house plants (succulents)
• scissors

How to weave - instructions:

Step 1: Cut the threads

Cut eight pieces of neon cord, each 90-150 cm long, depending on how close to the ceiling you want to place the pots.

Step 2: Making a Knot

Take the newly cut threads together and tie a knot at one end, resulting in a tassel from a small excess of cord at one end.

Step 3: Divide the threads into sections

Lay out the rope in four sections (similar to the shape of a cross). That is, two ropes in each section.

Step 4: Cut the Straws

1. Cut off in straws that small part that is separated by a spring. Then cut it in half. Take eight of these small pieces and stretch a thread into each of them.
2. Move the straws to the center(knot) and on every two threads (in sections) make a knot. Here's what it will look like:
3. Lay out the threads again in the shape of a cross, two threads per section. Only now, to form a section, take one thread from the previously adjacent sections.
4. Cut the straws into pieces (total need 16), each of which should be the size of a piece of straw, which is separated by a spring.
5. In each of 8 pieces of straws thread and make knots on the threads from one section.
6. Similarly, lay out 2 strands in the shape of a cross, one each from adjacent sections.

Add a third and final set of straws to the strands and tie adjacent strands (similar to the previous set).

Step 5: Hang Up

It remains only to hang the pots and insert a flowerpot with indoor flowers into it. Make a few pieces, then together they will create a beautiful composition.

And neon straws will also glow a little at night, which will look very original.

Macrame flower pot

The macrame technique has, probably, the most variations in the manufacture of planters. They can be very simple, which can be done in just 10-15 minutes with your own hands, or complex with many hours of work. Practice weaving first on the lungs, hone your skills, and then improve.

Master class: DIY macrame weaving

Macrame is back in fashion, as is needlework in general. In this master class, you will learn how to make a hanging planter with your own hands using this technique. There is nothing complicated, just follow the instructions and you will succeed!

Necessary materials:

• 3 cords 2.5 m long and 0.5 cm thick
• Metal ring with a diameter of 2.5-3 cm
• Hook (on wall, slot) to hold macrame while working
• Scissors and colored rope
• Glass pot in the form of a ball with a diameter of 20 cm
• Drainage stones and soil
• House plants that climb (e.g. Stephanotis)
• Decorative moss (optional)

Step-by-step instruction:

Step 1: Thread the ropes into the ring

Pull all three ropes through the metal ring until the ring is in the middle of the ropes. Thus, you now have six ropes to work with, each 1.25 m long.

Step 2: Making a Knot

1. Of all tie a knot with six ropes right next to the ring. Make it as tight as possible, for this, after forming the knot, tighten each rope separately.
2. Hang the ring on a hook (if there is no hook, then tie it to a cabinet handle or anything like that with a separate small rope, the main thing is to fix it). This will allow you to use both hands while working.

Step 3: Divide the Cords into Groups

• Separate the cords into three groups, two in each. Tie a knot in each pair 45 cm below the ring. You will have three knots at the same level, make sure they are tight.
• Take one rope from two adjacent pairs and tie them together about 12 cm below the previous knot.

Repeat the previous step with the rest of the ropes so that they are all tied together. This will create a zigzag pattern between the cords.

Step 4: End Node

1. Approximately 12 -15 cm below the second set of knots, gather all six ropes together to make one big final knot. Pull each cord individually to make the knot as tight as possible.
2. See what the length you need to leave and cut the ropes to the right size.
3. Wrap the multi-colored threads around the rope in several places, creating blocks a few centimeters long. This stage is decorative and is optional. Now the macrame pendant is ready and you can place the pot in it.

Step 5: Planting Indoor Flowers

At the bottom of the glass pot, place stones for drainage to make a layer about 2.5 cm high. Fill the rest of the bowl with soil.

1. Remove the plant from the temporary pot and place in a glass jar. Pour water over and press down on the soil to compress it. You can place decorative moss on top of the soil, optional.
2. Place the glass bowl with the flower over the lowest node and spread the ropes to the sides to fix well.
3. Straighten the plant if it is tangled in the ropes. Hang and admire the beauty of the plant and your own product.

Macrame schemes for flowerpots

Here are a few more schemes for those who want to master the weaving of macrame. They are very simple - suitable even for beginners. Look at the photo and repeat. A clothesline or thin twine is perfect as a material. The minimum consumption for a hanging planter is 10 meters of rope.

Wooden planter

The tree also gives a fairly wide range of actions, various shapes, colors. Choose what you like best and create.

Master class: hanging wooden planter

This hanging planter will wonderfully complement your home interior. It is done quickly and simply, the materials also will not take a lot of money. The best solution for an apartment.

Necessary materials:

• Wooden plate and saw
• Home plants and flowerpots
• Rope and metal ring
• Drill and sandpaper
• Paint and brush

Step-by-step manufacturing scheme:

Step 1: Making Wooden Squares

Consider how many tiers your flower stand will have ( there are 4 of them, but you can do more or less ). Choose the houseplants you want to place there.

Based on all this, cut out the required number of squares from a wooden plate.

1. To do this, turn the pot upside down and place it on a plate, circle and leave on the sides about 5 cm, thus determining the size of the square.
2. With a saw make squares.

Step 2: Making holes for the pots

1. You already have a circle drawn on the tree from the top of the pot, now you need to draw another one in the middle of it so that their centers coincide, but the diameter of the new one was about 1-2 cm smaller.
2. This value depends on how quickly the pot that you will place in the stand increases to the top, and also you want so that the wooden square is almost at the very top, or in the center of the pot.
3. You can take another pot, suitable for the size of the stencil, and circle it.

• Cut out this new circle with a jigsaw. For convenience, you can first make a hole with a drill and, starting from it, work with a jigsaw.
• The pots should now fit inside the squares.

Step 3: Hanging Holes

At the corners of the squares you need to make holes for the rope so that they can be hung. To do this, use drill with a diameter of up to 1 cm.

Step 4: Paint the Tree

Using sandpaper, remove the roughness and irregularities that have formed after sawing and drilling. Now the tree can be painted or simply treated with an antiseptic. In this case, dark brown paint was used.

Step 5: Paint the Pots

Pots can also be painted, if desired. Sloppy strokes of white paint look good on plain clay pots. This step can be skipped.

Step 6: Putting it all together

In order to fasten the wooden squares together, we need a thick rope: cut 4 ropes of 180 cm each (for a given number of tiers). Pull one rope into each corner hole of one of the squares and tie a knot at the end, this will be the lower part of the structure.

Tie one more on each rope. knot at 25-30 cm above the previous one and thread the ropes into the holes of the next square. Check that everything is even, and the second tier is clearly horizontal above the first, correct the knots if necessary. The second tier is ready. Repeat these steps for the remaining tiers.

Step 7: Plant Your Plants

A practical advantage of such a hanging stand is that water that may flow down after watering from the top plant will drip onto the lower one. So a pot stand is needed only on the lowest tier (if you use it outdoors, you can do without stands at all).

You can also put coffee filters or similar absorbent materials on the bottom of the pots so that the water can flow out, but the earth will not fall out through the hole.

TIP: To prevent the bottom pot from falling out of the stand if someone accidentally catches the rope, glue it to the pot with superglue.

Step 8: Transplant the plants into prepared pots.

If you glue the base of the lower pot before inserting it into the wooden square, it will turn out like in the photo below. If you want the bottom pot to be inserted into the tree in the same way as the rest, then first transplant the plants, insert the pots into the holes in the tree, and only then glue the stand to the bottom one.

Step 9: Hang Up

1. To hang this structure, pull the ropes through the metal ring and tie a knot, or bend them over and tie them around with another thin rope.
2. Adjust the rope so that all tiers are horizontal and even.

Such a stand is good, just do not forget that the flowers need a sufficient amount of light.

A hanging stand is a wonderful solution for those who love flowers but don't have enough space to place them.

Pots made of copper tubes

The manufacturing principle is similar to that described in the previous master class, only copper tubes are used here (and they fold into a slightly different pattern). Of course, these materials will be more expensive than straws, and cutting them is not so fast, but in general there is no difficulty, and it turns out beautifully and with high quality.

TIP: If desired, copper pipes can be replaced with plastic straws for cocktails

Necessary materials:

• 2 m copper tube with a diameter of approximately 3 mm
• Mini pipe cutter
• Strong thread or fishing line
• Leather cord (length depends on how high you intend to hang the pot)
• small pot
• Plant

Step by step weaving:

Step 1: Cut the tubes

You need to cut the tube into the following pieces: 20 pieces 4 cm long and 5 pieces 24 cm long. Cut long pieces first, and then small ones, it will be more convenient. Use a measuring tape for measurements.

Step 2: Start folding the tubes

Tie a knot at one end of the fishing line, and thread the other through 5 small pieces of the tube so that you get a pentagon (that is, the line must be passed through the first piece of the tube twice).

Step 3: Continue making pentagons with small tubes

• Pass the line through 4 tubes of the same size, and then through the tube of the previously formed pentagon. Now the line is in the tube connecting the pentagons, and you need to bring it through the top tubes of the pentagon you just made to its left edge.
• Don't worry if they don't look perfect, everything will straighten out when you hang and place the pot.
• Then do it in the same way 2 more pentagons, in total there should be 4 pieces, and they should be located as in the photo below.
• Now bring the line through the tubes to the bottom of the extreme pentagon and put a tube on it. Then pass the fishing line through one edge of the other extreme pentagon.

Here's what should happen:

Pass the line through 2 more tubes, and then through the edge of the pentagon, as in the photo below. It should look something like a flower, or rather like this:

Step 4: Stringing Long Tubes

1. Lead the fishing line to one of the highest points of the structure (between the two upper tubes of one of the pentagons). Now the fishing line needs to be threaded through a long tube.
2. Pass the line through another long tube, and then direct it to the next highest point of the pentagon structure (any, not necessarily adjacent).

1. Pass the wire through 2 small tubes to get to the next high point. Now pass through another long tube, the line will come out to the junction of the long tubes, return the line back down through one of the previous two long tubes. Attach the fourth tube in the same way.
2. Now it remains for you to attach the last tube, but first place a pot in the middle of the structure, otherwise it will not fit through the honey tubes later.
3. Now attach the last tube. Here's what should happen:

Step 5: Attaching the Leather Cord

Cut about 30 cm of leather cord and attach it to the connection point of the long tubes. You can tie a knot, but here, for aesthetics, hot glue was used, fastening it to a neatly folded end of the cord. Here's what it looks like:

To hide the glued area, cut another small piece of cord, secure it with hot glue, and wind it around the cord to hang from.

Trim off excess line and cord. And the last step: plant your favorite houseplants!

Where to hang pots

Moreover, in summer, plants can be placed both inside and outside the house, but since it is cold now, we will focus on home ones. You can green any room of the apartment, kitchen or hallway, the main thing is to take into account the needs of plants, the right amount of light. In fact, each version of the hanging planter can be placed in any room of the apartment, so this is only your design decision.

Of course, you can just put a flower pot on a windowsill or bedside table, and it will already look good. But if you try a little more, then you can decorate the appearance of the pots, and make better use of the space of the apartment, at the same time arranging the plants and not taking up extra space with them (with hanging planters).

Above the workplace

Here, a hanging planter will not take up much space, especially since we always try to put the desktop closer to the window, which will be very popular with indoor flowers.

In the bedroom

The bedroom is not only beautiful, but also very useful to place plants. They enrich the room with oxygen. And how nice it is to wake up among the greenery. Try hanging plant pots in your bedroom.

In the kitchen

This is ideal, you will never hook or turn over a flowerpot. The planter looks very homely in the kitchen!

On the balcony or in the chill-out area

If the area of ​​\u200b\u200bthe apartment allows, then with the help of flower hanging flower pots, you can plant trees in the whole room and make a mini-garden. But spruce squares are not enough - you can arrange a comfortable seating area on the balcony.

Planter ideas from improvised materials

If you show imagination, then a hanging planter can be made absolutely from any materials at hand. Starting from old cans, bottles to unwanted towels and T-shirts.

From beads

If you have old beads lying around and you don’t know what to do with them, then here is one of the options for solving the problem - we decorate the pots.

From baskets and pots

Such pots can be used both for a single pot, and for several at once. Such wicker baskets are sure to be found in many homes. They often lie idle, but in vain they will make an excellent suspension for flowers.

High-tech planter

Modern suspensions made of concrete or brass will fit into the modern style of the apartment.

From bottles

Probably the cheapest of all methods, but it looks no worse than the others. We collect empty plastic and glass bottles and make original flower pots.

From moss and shells

Many houses have shells brought from the seas, and if you drill a small hole and plant small succulents there, a mini-planter will learn. The main thing is the quantity, 3-8 pieces will create an excellent hanging garden.

For flowers with your own hands. Almost all families grow indoor plants or flowers in the garden. It looks very interesting if standard flower pots are placed in an unusual planter. Of course, there are a lot of bright and original planter models on the market, but any person wants to bring individuality and some zest to their home or garden. There are a lot of options on how to make a planter with your own hands, it remains only to choose the material that will look most appropriate in your home or yours.

Advice! It is worth remembering that a planter, unlike a flower pot, does not have special holes in the bottom from which water could pour out after watering. Do not forget to drain it from the pots so that the roots of the plants do not rot. Free space between pots and flower pot or another container in which flowers grow, usually lined with moss or gravel so that the pot does not “dangle” inside.

DIY flower pots: building material

Surely, after the repair, any housewife has some unused materials that can be adapted to create flower pots:

• If there are slats, bars or other boards, you can create wooden planter . First you have to cut out equal parts for the walls, and then connect them with nails or glue. The walls and bottom of the pots can be designed in the form of a lattice, or they can be solid. For oblong bowls with flowers, a pot-box in the form of a small fence. This design is appropriate in an apartment or.

• Pretty easy to do DIY planter for the garden from the remains of logs However, it is better to entrust this business to a man. A log about 1-2 meters long can be rested on two small logs to make a kind of bench, or simply laid horizontally on the ground. Then the inner part is cut out in a large log, only the walls and the bottom remain. Inside you can put small bowls with petunias or others.

• From the remnants of ceramic tiles, you can make a bright planter . To do this, you need only 5 parts, one of which will become the bottom, and the rest - the walls. The easiest way to connect the parts with glue. Spectacular interior items are obtained from mirror tiles, they are easy to fit into modern minimalist interior or style.

• When burlap or other dense fabric remains from construction and gardening, you can make pots for small plants . To do this, you need to cut out two identical square or semicircular parts and sew them on three sides. For a more complex pattern, you will have to choose a base in the form of a wire that will shape the product. These pockets look great on the fence of a country house or on the balcony.

Cache-pot from natural materials

What could be easier than using the materials that gives us to create flowerpots and pots. nature? In the nearest forest or by the river you can find something that will subsequently significantly transform your interior:

• A beautiful planter will turn out from pebbles - small streamlined stones. They are glued together, giving the future product an unusual shape. Similarly, you can use nut shells, tree cuts, small twigs, cones, etc.

• Can do pots for giving do-it-yourself from a stump . A core is cut out in it, where a large plant, such as a fern, is placed. If you make several of these stumps at the same time, you get a whole clearing in the garden.

• Eco-style planters can be weaved from the vine. Weaving from a vine is a rather difficult task for a beginner, but the products are very effective. You can hang or put such planters both in the house and in the garden.

The charm of the most beautiful and well-groomed plants will not be complete if they are planted in assorted pots that differ in shape, size, material from which they are made. An excellent solution to the problem is a flower pot. Purchased in a store or made by yourself, they will complete the look of the collection on and help decorate a suburban area.

Selection of ready-made planters for indoor and garden plants

The range of ready-made planters in stores is incredibly large. In order not to get confused when choosing, experts advise paying attention to several aspects. Among them:

• the price of the sample you like;
• destination pots;
• the size of the pot to be decorated;
• compliance with the style of the interior or landscape design;
• product practicality.

Most often, flower growers prefer flower pots made of polymeric materials, fired ceramics or clay, glass.

Plastic flower pot

The most affordable samples are made of plastic. They are easy to clean and can be used indoors and out. Due to the presence of drainage holes and the ability to easily make new ones, the plants in the pots are protected from rotting of the root system. Another useful quality is lightness, which is important if the grower needs a hanging planter for ampelous plants or a spectacular garland of their flower pots. Despite the thin walls, the container located in the sun does not heat up to critical temperatures, does not cause overheating of the soil and the root system.

If desired, plastic planters can be easily decorated with wood fragments, textiles, beads, or simply painted using safe and bright acrylic paints.

Shop-bought plastic planters are easy to transform with a skein of rope and glue. The side surface treated by him is tightly wrapped with twine or cord.

However, with a lot of advantages, plastic planters have a couple of disadvantages. They are not too resistant when used outside the home, and the products are by no means original.

Ceramic planters

Ceramics of various types have long been used to make flower pots and planters. Clay is incredibly malleable. It can take a variety of forms, natural material stores the warmth of the hands of the master, transferring it to the interior or summer cottage.

When choosing a ceramic planter, you should pay attention to the presence of a drainage hole, as well as to the outer coating.

Unglazed clay retains porosity, which improves the microclimate inside the pot, but reduces the durability of flower pots. When watering with tap water, sloppy stains may appear on the walls. Outside the house, the tank threatens with destruction:

• increased air humidity;
• sudden changes in temperature, especially freezing and thawing.

Painted or glazed ceramics look very impressive and much stronger, but they warm up slowly and poorly remove excess moisture.

Due to the heavy weight of ceramic products, especially when making hanging flower pots with your own hands, you need a reliable fastening. It is easy to make with strong twine and macrame techniques.

Glass pot for flowers

Transparent or colored glass is a fragile, but spectacular material that will help decorate the interior, make the house unique.

At the same time, having shown imagination, making such a planter with your own hands for indoor flowers is not difficult at all.

As a base, you can take glass jars of a suitable size, glasses, vases, or even a small, rounded aquarium. By connecting the vessels with a rope, fixing them on a wooden stand, you can build a garland for flowers, make a planter for several pots at once.

How and from what to make a flower pot with your own hands

The decoration of the window sill and the garden will be flower pots, not found in the store, but made by the florist with his own hands. These samples are usually:

• many times cheaper than analogues from the store;
• created taking into account the tastes and preferences of the master;
• are unique.

But, relying on his imagination, the grower needs to remember about the reliability of the future planters, safety and practicality. It is especially important to take into account the changeability of the weather and the influence of external factors if you have to assemble a planter for the garden with your own hands.

The most popular materials suitable for such work:

• wood, including planks, bamboo, dry branches collected in the garden;
• cement mixtures that, after solidification, turn into durable, moisture-resistant structures;
• durable types of twine and rope, from which wicker planters are made;
• textiles treated with wear-resistant paint.

It is not necessary to go to the store for the original planter or materials for its manufacture.

One has only to look around to notice things that have gone out of use, but can turn into a unique interior or landscape object.

Do-it-yourself hanging planter for flowers

Man-made planters for the home are a great opportunity to show your imagination and demonstrate the ability to create practical and absolutely unique things.

The simplest option is a hanging macrame planter. Woven to the size of the pot, it:

• fits perfectly into the interior;
• decorates any container in which an indoor flower grows;
• can be used for ordinary and ampelous plants;
• in combination with others, it forms a multi-tiered garland that saves space on the windowsill and gives the window a unique look.

In addition, the planter allows you to significantly improve the lighting of plants and simplifies care with a large number of flowers in the house.

When choosing a rope for weaving, it is better to give preference to samples made of wear-resistant fiber that does not stretch under load, does not fade in the sun and is not afraid of moisture. The same requirements apply to wicker planters for the street.

Floor and table flower pots

Large plants, such as indoor lemon, monstera, ficus or lush fern, are a great decoration for the house. To make them look even more spectacular, the pot can be placed in the original planter.

It is not always possible to choose a variant of a suitable design and size, and everyone can make a high floor planter for flowers on their own.

One option is cement pots. As a basis, a quickly solidifying mixture is taken, which is poured into the prepared form and after some time a strong casting-pot is obtained. Another way to use the material is to drink a textile flap with it and give it a suitable look, wait for the composition to dry. This planter can be used in the house and in the garden. For a greater decorative effect, the casting is painted and even covered with mosaics.

A box of a suitable shape will serve as an excellent planter for a large flower. It is pre-sanded, treated with a moisture-proof varnish or painted. To protect the floor and other surfaces, for example, a table under a wooden flower pot, a tray is placed on the bottom to collect excess moisture. The free space between the pot and the planter can be filled with coconut fiber.

To simplify the care of a large green pet, to protect the plant from moisture deficiency and drying out, a planter with a built-in watering system will help. You can buy it or make it yourself from auxiliary materials.

In addition to the container for the pot, there is a cavity for water and a tube for filling it, as well as a system of holes that supply moisture to the roots and remove its excess. A similar design for flowers of any size can be assembled at home. It will be useful both on the windowsill and in the garden, especially when the plants are deprived of the grower's daily attention.

The simplest self-watering planter can be made from an ordinary plastic pot. The main thing is that it should be the right size, and its bottom should have many large drainage holes. The shipping container in which the flowers arrive at the store is perfect. Under the drainage, a plastic mosquito net is laid at the bottom. It will not let the soil wash out. Several nylon cords are threaded through the holes so that their ends remain free to hang.

By placing such pots with home or garden flowers on gravel in a tray filled with water, you can be sure that the plant will not suffer from drying out. The liquid will rise to the ground along the rope, but will not cause root rot.

We make a hanging planter with our own hands - video