Do-it-yourself homemade products for the garden and vegetable garden (39 photos). Pond from an old bath

Landscaping a summer house will not be a problem and an expensive investment if you show a little ingenuity. It is not difficult to create homemade products with your own hands - it will take time, simple tools and fixtures. You can use the remnants of building materials, unnecessary boards, car tires, sawn trees.

What materials are used

Any summer resident will not refuse the stylish decor of the site. Many firms offer original stuff. However, do-it-yourself crafts will help to give originality to the site.

Materials that are most often used in the work:

When decorating a summer house, one should not restrain one's imagination - bold combinations of materials and non-standard use of unnecessary things are welcome.

It is not necessary to observe proportions or natural color combinations. A giraffe may have purple spots, and a small engine may be small.

Original decor for the recreation area

Many townspeople acquire suburban areas for a relaxing holiday. It's nice to get away from the everyday life of the city and feel the connection with nature on the weekends. The design of a corner for relaxation deserves attention, it is advisable to fence it off from the agricultural work zone. A fashionable solution is the construction of small arbors from the remnants of boards. You will also need poles for supports and cross beams.

Sequence of work:

1. At the corners of the site, pits are dug 50-60 cm deep, where the bars are inserted and fixed with a solution.
2. Support beams with self-tapping screws are fixed at the upper ends of the bars.
3. Cross boards are fixed on the support beams. On the bars, the boards are fixed in a horizontal form, leaving gaps 5-7 cm wide.

A neatly cut lawn or a platform paved with stone - any options are suitable for decorating the site. To revive the structure, flowerpots with flowers are installed near the site or climbing plants are planted nearby.

How beautiful to arrange flower beds

Fragrant flower beds are the best decor for a recreation area.

It is easy to make non-standard flowerbed fencing from improvised means:

1. If there is a small amount of brick left, you can lay out a flower bed of any geometric shape in several rows. The solution will help to fix the structure and give it strength. Flower beds made of natural stone also look natural.
2. Car tires have long been a sought-after material in summer cottages. To give the flower garden a well-groomed appearance, it is advisable to paint the tires with bright paint and lay them out in several layers, forming flowerpots or lay them out around the site in a curved form, forming circles, ovals.

A couple of plastic or wooden flowerpots will help to give a non-standard look to an old bicycle. The transformation is done quickly: the bike is painted with bright paint, flowerpots are fixed over the front and rear wheels. A picturesque view of the structure will be given by climbing plants, the branches of which will skillfully disguise metal structures.

An old bathtub will not look like trash at all if it is transformed outside the box. Of course, the most straightforward option is to use a colorfully painted container as a reservoir.

However, meticulous and not lazy summer residents will transform the bath into cozy furniture for relaxation. For a miraculous transformation, it is necessary to cut out part of the side wall with a grinder, carefully grind the sections. Comfortable sofas ennoble: they are painted in the right shade, decorated with soft mattresses, headrests.

An impromptu flower garden in the form of a garden watering can, installed next to the sofa, will allow you to create a real relaxation zone.

Stylish garden paths

Rusted metal tanks or old wooden barrels can be turned into original flower beds or even original beds that will successfully complement garden paths.

Stages of work:

Barrels, tubs, thick logs can be called the most pleasant material for work. It is wonderful that objects can be placed not only vertically, but also horizontally, sawn in half or built multi-tiered structures.

Products do not need to be specially decorated - a colorful wooden texture will serve as the best decoration.

Do-it-yourself figured compositions

It is quite understandable the desire of each summer resident to give the site a unique look. In order not to spend money on the services of designers, you can create fun crafts with your own hands from improvised materials. Unnecessary garden tools, broken metal products, household containers, cobblestones and stones of different sizes - everything is used.

How to make metal decor

Creative decoration of paths, lawns will be unique figures assembled from old shovels and broken rakes, choppers. It is not difficult to create expressive images - the main thing is not to limit your imagination. To assemble a snail figurine, you will need literally a narrow sheet of metal, a can of canned food. Black paint will give the figure a laconic look and make it very noticeable against the background of a green lawn.

The original solution is to combine different materials when creating figures. The union of stone and metal looks elegant and natural. A playful look has a cat, assembled from rounded cobblestones of different sizes and metal elements. A stone pet is comfortably laid on a large stone to bask in the sun.

Flowers collected from table metal spoons will become a brilliant decoration of the flower bed. An impromptu flower garden will delight summer residents at any time of the year - rainy autumn and snowy winter. An umbrella assembled from metal tubes will give a coquettish and airy look to the flower bed. Welding a structure at home is easy. To plant flowers, first make a frame of plywood or thick film.

Original do-it-yourself crafts made of wood

Wood products always bring comfort to the decor of the garden plot. A wooden composition in the form of large porcini mushrooms will ideally fit into the landscape design of the site. However, you can give the fungus a playful look by using an unuprooted stump. A funny grimace on a tree is easy to depict with a chisel. And the hat can be made from a thick cut.

Decorative compositions assembled from wooden saw cuts or logs become a real work of art. The figurines of animals collected from old branches, sticks and several logs look playful. A more practical solution is the arrangement of flower beds from small logs.

Create a small flower garden in several stages:

1. The log is sawn into several equal parts, thin wooden cuts of branches are made separately to decorate the wheels.
2. In each element, the inner part is removed and an impromptu cabin of a locomotive is made separately from small boards.
3. Wheels are attached to the logs and the composition is laid on the site in the form of a train.

To make it easier to take care of the flowers, the plants are planted in separate pots, which are simply placed in the recesses.

Do-it-yourself functional homemade products deserve special attention - country furniture assembled from improvised materials. The easiest way to make items from sawn thick wood. It is enough to make a table from the base of the trunk, and less thick logs will take part in the creation of chairs. A small bench is assembled from individual branches and boards. It is not recommended to paint such furniture with colored paints - the natural wood texture, covered with a colorless water-repellent varnish, looks more elegant.

A popular option for crafts is animal figurines collected from tree cuts. You can assemble a composition from a couple of owls located on a stump. The stage of assembling homemade products created by one's own hands takes a little time: bodies are made from large saw cuts, on which round eyes and wings are fixed.

Do-it-yourself homemade products for a summer cottage children's corner

Any tree is the best option for decorating a playground in a country house. Different materials will be useful in the work: logs, hemp, boards. Making crafts for a summer residence with your own hands is an exciting activity in which all family members can take part. Simple shapes, a minimum of details, bright colors - such figures look elegant and fun.

It is easy to assemble figurines from different materials. As an option - a set of wooden poles, tires from a car.

It is easy to build a figurine near the playground:

1. The tire is half dug into the ground.
2. A pillar 8-10 cm thick is dug in front of the tire.
3. On top of the logs, an impromptu muzzle from a small log is attached. Details of the figurine (tail, ears, eyes) are cut out of plastic bottles.
4. You can color the figurine for any animal.

In order for the child to have fun on the site, it is advisable to create not just decorative crafts, but games.

As an option, plywood figurines of animals are installed. Holes of different widths are made in the canvas through which balls can be thrown.

the solution is the design of locomotives from small logs of the same size. To build a structure, you will need logs, paint, tools.

Main stages of work:

1. Holes are made in the base logs (even number) of the same size.
2. The bases are laid out on the ground at equal intervals, painted in one color.
3. On the bases, logs are placed perpendicularly - “carriages”, painted with multi-colored bright colors.
4. To highlight the "engine", a pipe and a small bar - a "booth" are fixed on a log.

Flower beds, decorated in small metal barrels, will add brightness to the playground. Kids will love taking care of the flowers planted in the colorful flowerpots.

Amazing crafts in the country - this is a great chance to give products a "second life" and decorate the site in an original way. A little time and diligence - and you can give functionality to a modern laconic decor or simply decorate the site with figurines-characters of your favorite cartoons.

Video about original crafts in the country

All the owners of a summer house once think about decorating it, bringing something special into the atmosphere. Of course, you can go to specialized stores and buy whatever your heart desires. But if summer residents want their place of rest to be unique and inimitable, then it will be much more interesting to make decorations with their own hands. Jewelry made by yourself will give the owners both a creative mood and aesthetic pleasure.

We choose original ideas for giving

Each owner of a summer house, if desired, can find a lot of different ideas for decorating his site. For the manufacture of most scenery, only improvised means and minimal costs will be enough. And old, unnecessary furniture and interior items will inspire creativity even more. Often, seemingly completely useless and forgotten things can come in handy. Country designers use in their work everything that comes to hand: broken old furniture, unnecessary toys, various bottles and utensils, car tires, leftover building materials and much more.

Not a single summer cottage is complete without intricate interesting flower beds. You can add uniqueness to flower arrangements by planting them in old containers. It can be barrels, pots, and even carts. Many summer residents build various fences for flower beds.

Cosiness will always be added by original paths at their summer cottage. They are made from timber or stone. And the rest of the materials can always be used for the construction of the next composition.

Bottles and plastic jars are especially popular with country designers. From them it is easy and simple to build a lot of interesting sculptures, decorations for flower beds, borders. There are no limits for imagination here.

Be sure to place a bird feeder in the country. Children usually love to watch birds. And with a bird feeder, birds will be a frequent guest at their summer cottage. It can be made from a plastic bottle, and from an unnecessary block of wood, and from twigs.

Without much difficulty, you can make a variety of figures that will bring comfort and individuality to the country atmosphere. For their manufacture, you can use a variety of design solutions and materials. For example, polymer clay, remnants of mounting foam, gypsum and other building materials. One has only to start creative work and it will immediately become clear that nothing is impossible.

Crafts from improvised means

The most popular among improvised materials for crafts are bottles, various plastic jars and boxes. Before starting work, you should definitely think over the details so that the result is really beautiful, and does not resemble a bunch of plastic waste.

Plastic bottles are easy to cut, it is easy to give them the desired shape. And if you cover the result of the work with suitable paints, you get bright, unique decorations for giving. For example, you can make figures of animals (pigs, cows, bees) or fairy-tale characters. By making such decorations, you can unleash your creative potential, and each time the crafts will be more and more perfect. With a large amount of unnecessary plastic, not only crafts are made from it, but also pieces of furniture.

If there is a glass cutter among the tools, then you can make original pots from glass bottles. Such crafts look very stylish and easily fit into any design. Candle holders can be made in the same way.

Bottle caps can also be useful for decorating furniture, decorative fences, creating compositions and even curtains. You can also use chocolate egg toy containers.

The remains of natural stone are perfect for decorating a pond in the country. A small pond will bring a unique comfort to the atmosphere of the cottage. Around will look good flower beds, crafts or a recreation area. If the pond turns out to be large enough, then it can be decorated with an interesting bridge.

Every motorist will always have old tires. You can simply paint them and make bright bases for a flower bed out of them, or you can show your imagination and cut out various shapes.

Arrangement of a play area in the country

While landscaping and decorating a summer cottage, do not forget about the children. They need their own territory for games and entertainment. Children of all ages love swings. They can be made from ordinary boards and ropes, or you can use metal chains and old tires painted in bright colors. From improvised materials it is easy to build slides, swings, rocking chairs. The main thing is that everything is strong and reliable.

Toddlers will definitely need a sandbox. Her borders will look interesting from multi-colored bottles or wooden log cabins. The sandbox in the form of a ship or car will look original. It is recommended to make an awning over the sand to protect from the bright sun.

Children will certainly enjoy having their own playhouse in their summer cottage. Benches, a table or other furniture can be placed inside. Everything depends on fantasy. The house can be decorated with a bright flower bed or homemade decorations. Usually the guys themselves are happy to take part in decorating their territory.

Ideas for decorating a fence in the country

The fencing will best emphasize the uniqueness of the suburban area. The fence is not only the protection of the territory, but also the so-called calling card of the owners.

A simple wooden or iron fence is commonplace. It must be decorated. You can decorate the fence with a variety of materials: flower pots, crafts in the form of animals, painted landscapes and everything that is enough for imagination. For example, unnecessary bright-colored rubber boots will look original as pots.

You can decorate the fence with old discs. They reflect sunlight and look interesting in any light. Different patterns can also be applied to the discs.

The fence made of wooden round timber, painted “under colored pencils”, looks spectacular. With such a fence, you can also fence off the children's territory in the country.

Any fence will look cozier if some climbing plants grow along it. There are various types that grow very quickly. For example, decorative beans or morning glory. You can plant vines. They grow much slower, but also look more expensive. Beyond comparison in this case, wild grapes. Grape leaves gradually change their color and retain their beauty until the frost. It looks original when the "grape fence" turns into a canopy. This design gives the fence an old look.

Flowering shrubs planted along it will become beautiful decorations for a low fence. You can combine plants with different colors and flowering time.

In the evening, different lanterns on the fence look beautiful. It is also possible to make them yourself from improvised materials. Or you can simply place candles in painted glass jars attached to the fence. The main thing is that the flame does not fall on the fence.

A lot of room for imagination will open up to those who like to draw. You can draw anything on the surface of the fence: nature, plots, cartoon characters, ornament, small patterns in the form of flowers, butterflies, ladybugs. It is easy to draw on any fence, but it is easier on a corrugated fence.

Compositions of caps, shells, stones, dishes look original. It is easy to make plastic flowers from the bottoms of bottles and paint them in rich colors - they will look beautiful on a wooden fence.

We make flower beds and flower beds

Flower beds will help transform the summer cottage and bring color to its atmosphere. When choosing plants, be sure to take into account their individual characteristics. First of all, it is worth deciding on the flowers "soloists", that is, the main plants in the flower bed. The choice can be stopped at three or four types.

The design of flowers with ornamental herbs and leaves of an interesting shape looks beautiful. With them, the flower bed will be original, even when the flowers do not bloom. But do not try to place a lot of different plants in the country. The territory of the site should look holistically and harmoniously.

Of course, it’s not enough just to plant flowers beautifully. The flower beds also decorated around look more original. The composition must be complete.

Flower beds can be decorated using any unnecessary items. The article has already said that it is easy to make small flower beds from old tires painted in bright colors. You can use a wheelbarrow, a cart, an unnecessary beehive, or even an old car. The main thing is that everything is done neatly and aesthetically. If desired, you can add decorations to the flower garden in the form of homemade bees, butterflies, interesting stuffed animals.

You can make a small fence around the flower bed. For its manufacture, it is possible to use plastic bottles or cups, a fence made of tyn, stones. The flowerbed smoothly turning into a lawn looks beautiful.

Setting up a recreation area

At the cottage, a comfortable place for outdoor recreation must be equipped. This issue must be approached very responsibly. It all depends on the preferences and desires of the owners. It can be just a laid out area with a table and comfortable chairs or hammocks placed in the shade.

At any summer cottage, a gazebo will look spectacular, which can be made from the remaining building materials. Arbors look beautiful, the walls of which are decorated with climbing plants. Bright soft pillows or blankets look cozy as decorations.

Swings can be not only for children, but also for adults. It will not be difficult to build a wide wooden swing for relaxation or make hinged ones somewhere in the shade of trees. For convenience, they can be decorated with soft pillows.

In the recreation area, you will definitely need a barbecue. It can be made, for example, from an old barrel. Flashlights can be provided for the evening and night time.

When making and decorating a summer cottage, it is worth remembering that a summer cottage is a place of rest from everyday life and bustle of the city. It should be comfortable and calm, and the environment should be pleasing to the eye. It is important not to overload the territory with crafts or some kind of design solutions, everything should be in moderation. Imagine, create, surprise!

The dacha is a place to relax the soul and improve the body. Far from the bustle of the city, where the air is clean, it is so nice to actively spend time, grow an excellent crop. And having worked enough, relax as it should!

But to relax in comfort, you need to work a little to create beautiful, useful and comfortable things. Do-it-yourself homemade products for summer cottages and gardens - cheap, reliable and cheerful!

Wooden pallet furniture (pallet)

After the construction of the house, there is a lot of construction debris that can come in handy! Bricks and wall blocks are brought on pallets. They are returnable containers, but it’s reluctant to mess with this issue. With a minimum of effort, you can make original wooden furniture for a summer residence!

Check out this stylish living room coffee table. Do you recognize? It's just a regular pallet! It is not difficult to make such an interior item. Take a coarse sandpaper and clean the surface of the boards from which the container is knocked together. Then you need a finer sandpaper to make the surface smooth. After sanding, carefully wipe off the fine dust, consisting of particles of the removed wood.

Paint your new table with oil, acrylic, or other wood paint. If the pallet was knocked together from decent boards and you like the natural texture of wood, then it is better to varnish the table. For convenience, small wheels can be screwed from below.

More complex products are also made from this container - sofas, chests of drawers, cabinets. See some photos for inspiration.

Agree, this is a chic and stylish headset! If you yourself will make soft seats, sew ribbons of the same fabric to them from below to tie them to the frame. Otherwise, they will move.

The bed and a large headboard for it with shelves are also made of pallets. A good orthopedic mattress will allow you to sleep well even on such an original basis.

Such an open-air recreation area in an oriental style will not leave anyone indifferent.

Swing

Do you have children in your family or do you have guests with babies? Then you can't do without a swing! In order not to spend a lot of money, you can use unnecessary things.

For example, you can make an excellent swing seat from an old chair in a matter of minutes by sawing off the legs. And to make it beautiful, paint it with fresh paint.

By the way, not only children love to swing. Adults also enjoy it. Look at this version of a swing from a rattan chair, the legs of which have become unusable. Soft pillows of delicate colors, ribbons, lace fabric - everything to create a romantic atmosphere.

If there are large trees in the garden, you can hang such a structure on a thick bough, then you do not need to build complex fasteners, a strong rope will be enough.

The second life of an old bath

There are many possible options. Here are some of them.

Flower garden. One of the easiest ways to use an unwanted bath. It is enough to make good drainage from broken brick or expanded clay at its bottom, add a nutrient substrate and plant plants.

Water. The easiest option is to bury the bath in the ground and pour water into it. But you can decorate it in such a way that no one will guess from what you built yourself a pond in the country. A small fountain, natural stone for framing, lighting and favorite plants will help create a unique corner for relaxing on the site.

Furniture. Yes! It's hard to believe, but the bath turns out to be excellent furniture - sofas and armchairs. And don't worry if your bathtub is cast iron. With the help of a grinder, you can cut out part of the board to make a sofa or chair.

flower beds

Flower beds can be decorated in a very original way.

Vertical gardening with colorful rubber boots. In their soles, make holes for the outflow of excess water and arrange drainage from expanded clay. Fill shoes with soil and plant plants. Remember that any container that is not deepened into the ground quickly heats up in the sun, the earth dries up in it. Therefore, on hot days, water green pets at least 1-2 times a day..

You can also use other shoes.

If there is an extremely unattractive stump from an old tree on the site, which cannot be uprooted, do not be discouraged. It will make an excellent raised flower bed.

Some gardeners love their plant-decorated stumps so much that they even varnish them to slow down the decay process.

Instead of a stump, a picturesque log can serve as the basis.

Flower gardens can be arranged in various used items - suitcases, bags, furniture, tires and even in a car!

Try making a raised, warm bed by framing it with a neat wood frame, stone, or brick.

From plastic bottles

Plastic bottles are an excellent material for homemade products in the country and in the garden with your own hands. They can perform useful functions or be a decorative element to decorate the landscape.

A spray bottle is an indispensable tool in the garden. Make small holes in the container, put it on a pipe or hose with a neck and secure. It remains only to open the tap to let the water flow.

With the help of a bottle, you can organize root watering for plants. Make holes in it. So that the earth does not clog into the holes, put old polyamide tights on the container. Dig in the bottle so that the neck remains above the ground. There you will pour water from a hose or it will fill itself when it rains.

This method of watering will not introduce you into financial expenses at all, but will bring tangible benefits. From the bottle, water will flow gradually in small portions, without falling on the above-ground part of the plants. And this is very important for many fruit and decorative green pets: tomatoes, cucumbers, zucchini ...

Having filled the bottles with water, you can safely leave for a week in the city, and the plants will not suffer from drought. More water, before it goes to the roots, has time to warm up.

Frame flower beds and beds with glass or plastic bottles.

It looks neat and is practical. If you bury the bottles in the ground, they will become a barrier to the spread of perennial weed roots. And if most of the container remains on top, then you can pour earth inside the perimeter and the flower bed or bed will turn out to be slightly raised. She will be easier to take care of.

Durable wear-resistant panicles are made from plastic bottles. They have an attractive appearance due to bright colors.

Do-it-yourself homemade products for summer cottages and gardens bring special comfort to your personal green corner. They are pleasing to the eye, serve as furniture or are assistants in the struggle for the harvest. And they protect you from all sorts of adversity. After all, it is known that things made with your own hands have a special power.

Let your cottage be hospitable at any time of the year!

Do-it-yourself homemade products for summer cottages and gardens not only perfectly complement the garden plot, but also help save a decent amount on this. Today, there are many useful devices for giving, simplifying everyday life. Usually, a large number of unnecessary things and materials are collected in the country house, which people do not use in their apartments. it takes up a lot of space. Any summer resident has the opportunity, by turning on his imagination, to make simple home-made items.

gardening tools

When visiting hardware stores, many buyers note that the quality of garden tools does not match their cost. Even an expensive and high-quality shovel is very easy to damage. One of the options is to personally make some kind of country tool that can perfectly replace an ordinary bayonet shovel. for example, a garden digger, which is not only very easy to manufacture, but also convenient to use. If we compare an ordinary shovel and this country tool, it can be noted that the latter is much easier to dig the ground, and it does not exert heavy loads on the human spine.

Homemade digger

To make a digger for a garden with your own hands, you need those items that often lie and gather dust in the country. Must have:

• metal sheet 2 mm thick;
• metal pipe 0.5 inch in diameter;
• 2 bolts and 2 nuts;
• 2 engraver washers for bolts and 2 hours of free time.

You need to cut a metal sheet into 7 segments that look like stakes. That is, you should get a stake, wide on one side, and tapering to the other. Then, a pipe 43 cm long is taken, 5 mm is measured from the edge on it. The following marks are made every 6 cm. Another 5 mm should remain on the other end of the pipe, which should also be marked. Using a grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.

Cut out stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and seized by welding. Then the remaining pipes are welded into a U-shaped handle and bolted to the workpiece. That's all, the kopalka is ready to use.

Garden decoration

We should not forget about the opportunity to become a designer of your own garden in the country. After all, you can make not only country tools, but also much more. And to add zest to a country house, you can lay out a beautiful and original stone garden path. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:

• a stone with which the path is laid out;
• sand;
• gravel and board 25-30 mm thick.

Work should begin with a preliminary measurement of the distance of the future track. To do this, four pegs are hammered, which are connected in pairs with a guide rope. After, it is necessary to remove the top layer of soil, or in other words, dig a trench. While working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will help not only to use building materials correctly and economically, but also simplify subsequent work. Along the edges of the trench, you need to install boards, they will act as bumpers into which sand and stones are placed.

At the bottom of the recess, gravel should be poured first. It will not only perform a shock-absorbing function, but will also provide indispensable assistance in the drainage of groundwater. Next, the gravel is covered with sand, which should be moistened in advance - so it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm or more, and after that, you need to level the surface of the embankment with a board. Only after that you can lay stone or paving stones. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone once again.

Traps for mosquitoes

The invention does not fight mosquitoes, but their larvae. It hangs on tree branches. Mosquitoes lay their offspring in this device, which does not allow the born mosquitoes to leave it. For a more effective fight against bloodsuckers, you should make as many of these traps as possible. But even using this gadget cannot provide 100% protection against mosquito bites.

One of the easiest ways is to use an ordinary plastic bottle as a trap. It is necessary to cut off the upper part with the neck and insert it into the lower part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this, you need 15 g of yeast, 45 g of sugar and warm water. All 3 components must be mixed and pour the resulting solution into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap is able to attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in a residential area.

These were only 3 of the most interesting and easily manufactured devices for summer cottages and gardens. Do not forget that a person can create something more useful and unique from improvised means, you just need to give free rein to your imagination.

sadovod.guru

Homemade products for the garden and cottages: interesting ideas

The private sector is for many associated with hard, full-time work. Plant a garden, monitor the growth of plants, harvest. All this, of course, must be done. But if you organize the whole process correctly, then the work will be a joy. And there will still be plenty of free time for recreation. And do-it-yourself homemade products for the garden and summer cottages, made with their own hands, will help in this. Someone will object that everything can be bought ready-made in the store. This is true. But, firstly, there is not enough money to buy everything. And secondly, the very process of making something useful from improvised materials can bring a lot of positive emotions.

Russian people have always been distinguished by resourcefulness and ingenuity. And a huge number of do-it-yourself homemade products for summer cottages and gardens, photos of which can be found in our article, are proof of this. We will offer for consideration only a few options that will be useful in any area.

Many gardeners have recently given preference to flower beds located in boxes. They are elevated above ground level and fenced on all sides. Thanks to this, the care process is facilitated, and the garden bed looks more attractive and interesting. It is possible (or even recommended) to use such structures on nutrient-poor soils.

Homemade for the garden involves the use of improvised materials. Therefore, for the construction of the box, you can use boards left, for example, from building a house. If they are not available, you will have to purchase them in the store. Of these, a box of arbitrary sizes is constructed. Dimensions will depend on the size of the site, its style and the plant that is planned to be planted there. The height of the side is made approximately to the knee, so that the layer of fertile soil is thicker.

A metal mesh with a medium-sized cell is fixed to the bottom of the manufactured box. It will protect against the penetration of rodents and moles. If there are none on the site, then you can do without a grid. From the bed-box you can easily make a small greenhouse. Its height is chosen taking into account the plants planted there.

Drip irrigation

Homemade products for the garden will simplify such a difficult process as watering plants. You can make a drip irrigation system. This will require a large barrel (metal or plastic), a hose, capillaries (you can make holes in the hose at a certain interval) and various connections (tees, clamps, and so on).

The barrel is raised approximately 1.5-2 m from the ground. For this, a special stand can be welded from metal corners. Thanks to this, the system will have a stable pressure. From the barrel comes the main hose. A filter must be installed on it so that debris does not clog the system. Capillaries are fed from the main hose.

Do-it-yourself sprinkler

Homemade products for summer cottages and gardens will allow you to create something necessary and useful on the site from improvised means and materials. For example, from old plastic bottles that are always thrown away, you can make a sprinkler for the garden. It will allow you to process and water plants of various heights. A sprayer is attached to the watering hose. To a long stick (the longer, the better), the same atomizer is screwed with the nozzle up. The lever is fixed with a thread in the pressed state.

In a 1.5 liter bottle, a hole is made in the neck with a red-hot nail. A bolt is inserted into the hole and secured from the outside with a nut. The bolt must be drilled through with a drill. A hose is put on it and secured with a clamp. After applying pressure to the system, the nozzle unwinds and water is sprayed.

Tire compost pit

Old car tires are one of the most popular and affordable materials for making homemade garden products. You can even make a compost pit out of them. You only need 4 of them.

One of the tires that will serve as the base is cut. One side is cut off. From the rest, two sidewalls are cut off to make rings. Next, you just need to install the tires on top of each other in the designated place.

Bench

After all the work in the garden, you can relax. And on this account, you can also choose a suitable version of homemade homemade products for summer cottages and gardens. With a small set of tools and materials, you can make an attractive streamlined bench. It will become a place where you can relax and unwind.

From the materials you will need:

• A sheet of plywood (preferably from pine) measuring 90 x 90 cm and 1.6 cm thick.
• Reiki from the same tree in the amount of 7 pieces (2 cm thick, 9.4 cm wide and 140 cm long).
• Boards 2 x 6.9 cm and 100 cm long in the amount of 3 pcs.
• Boards 2 x 6.9 cm and 140 cm long in the amount of 9 pcs.

The parts will be fastened with self-tapping screws 0.5 x 5 cm. In addition, glue for connecting wooden elements, wood varnish, turpentine will be useful.

The plywood sheet is cut into three pieces. A template is drawn on them for cutting the sidewalls and the central crossbar. The shape is cut with a jigsaw. On the back, 3 notches are made for the rails that will hold the structure.

Homemade products for the garden will help make your country life more pleasant and easier.

fb.ru

Do-it-yourself homemade products for the garden and vegetable garden (39 photos). Pond from an old bath. Pallet bench. Rake hanger. Flower pots from shoes

It's no secret that today almost any goods for the garden plot are expensive in stores. So, for example, to purchase various accessories will cost, as they say - "a pretty penny". And if you make them from scratch, then you will spend no less, because you still have to buy the source materials.

So why not save money and organize do-it-yourself garden crafts from what you usually have at hand, or is it inexpensive? Moreover, everything can be done really beautifully and neatly. Plus, it's functional.

Crafts on the site

In this article, we will consider the most useful do-it-yourself homemade products for summer cottages and gardens, which are simple and original.

Beautiful "usefulness" for the garden and vegetable garden

It is worth noting one important point - you need to understand that only a small part of the list of crafts that can be done will be disassembled. Just these options are like a start, a “push” for fantasy.

After all, it is important to understand the very principle of how easy it is to organize everything, and then everything depends only on your imagination. So, let's start the review.

Pond from an old bath

Pond from the bath

If a small reservoir of this type is made on the site, then it will perform several functions at the same time - we will familiarize ourselves with them in the table below.

Agree, the task is worth it to implement it. Moreover, for this you need only an old bath, which in most cases is available on the site.

A pond is made according to the following scheme:

1. We dig a hole with our own hands in the right place, which, according to its parameters, should be slightly larger than the dimensions of the bath.

Pit device diagram

Advice: take the choice of place as responsibly as possible. It is undesirable to arrange a pond too close to the dining table, for example. The fact is that various midges, bees, etc. can periodically flock to the water.

And brushing off insects during lunch is not very pleasant, as you know.

1. We lay several boards at the bottom of the pit - a bath will stand on them.
2. We insert the bath into the pit and level it. We close its drain hole with a stopper. At the same time, it is desirable to treat the outer edges of the cork with silicone so that in the future there will be no leakage of water from the container.

Leveling the bath "by level"

1. We fill with earth all the free space between the metal and the ground.

Well, then it remains only to decorate the structure. To do this, you can lay out beautiful stones around the perimeter of the pond in the garden or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets, panels that are more or less resistant to moisture.

An example of edging from boards

As for filling the tank, for this you can use both water from the central water supply and natural streams. For example, you can bring the edge of the gutter of the gutter system of the house to the bathtub and the pond will be filled with rainwater.

In principle, such homemade products for a garden can be slightly adjusted - use any tank, barrel, etc. instead of a bath.

Now let's look at another very handy craft.

Pallet bench

Surely at some point you will want to sit in the garden - near an artificial pond, for example. And here you will already need such a useful design as a bench.

Buying a new product is expensive. It is much easier to make a bench from a pallet - if it is not available, then, as a rule, a considerable amount of them is thrown away near large warehouses and industries.

The bench is made quickly.

1. Make a transverse cut on one side of the pallet to the left of the reinforcing bars.

cutting line

1. On the other side, perform exactly the same operation, only on the other side of the bars.

Cut line on the other side of the pallet

1. We divide the product into two parts.

Dividing the pallet into two halves

1. We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.

The principle of joining halves

1. We fasten the wood with self-tapping screws at all connecting points.

fixation points

Photo lining under the bench

As you can see, everything is quite simple. Now you can paint the bench and mount other homemade products for the garden and cottage.

Now consider a very functional, original and cheap craft.

Rake hanger

A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.

Of course, the “primitive” version of this design is ordinary nails or self-tapping screws. However, it looks rather nondescript, and besides, the nails tend to gradually loosen inside the holes into which they are hammered.

And loosening means that such "hooks" will periodically fall to the ground. We offer a more original and reliable solution - to make a hanger from an old rake.

Rake hanger

All you need is the metal part, no wooden handle. Even if such an element is not available in the sheds, then acquiring it in the nearest market is not a problem. The price of a rake is acceptable for everyone.

The hanger is mounted like this:

1. We tie the wire to the two edges of the line on which the teeth are fixed. In this case, a piece of wire should be one. That is, it turns out that the fasteners, in fact, resemble the way paintings or mirrors are hung on a string.
2. We drive a large nail into the wall or in any desired place and hang a rake on it.

The hanger is ready - you can hang anything on the teeth of the rake: shoulder blades, caps, etc.

Now let's apply the old shoes, which are usually a lot in the country.

Flower pots from shoes

The ideal option is the presence of rubber boots, but in principle, regular leather shoes will do.

Shoe pots

From such shoes you can make non-standard flower pots that fit perfectly into the style of almost any garden.

The scheme of work is as follows:

1. We nail or fasten the boots with screws to the fence or to any other suitable plane.
2. We fall asleep in each boot the earth.
3. We make several holes in the soles - they are needed to release excess water.
4. We plant flowers in pots and enjoy the appearance of the invention.

An example of boot pots that are hung from an arch

Note! Any garden homemade products with your own hands can be "improved" indefinitely. The main thing in this business is to correctly organize the “basic” thought, idea.

And you can decorate the invention with anything and as your heart desires - there are no restrictions.

Keep this simple rule in mind when planning "utilities" for your garden.

This concludes our review of useful and original crafts for the garden plot and summarizes the article.

Conclusion

As you can see, gardener's homemade products are quite simple, and you can make them from almost anything. We hope that this article will be a catalyst for your ideas, and you will be able to beautifully decorate your site. Well, if you want more information on this topic, we recommend that you also watch the video in this article.

Add to favorites Printable version

9dach.ru

Homemade for giving / Homemade.net - Do it yourself with your own hands | Homemade. Useful tips and tricks for the home craftsman

101 readers, 162 topics

Everything that concerns cottages, gardens, kitchen gardens and country houses. Tips for growing plants, making equipment for summer cottages, home gardening, etc., etc.

Interesting homemade products for giving are waiting for you in this article. You will learn how to make a lawn mower from an old washing machine, make a sink, a country shower, a dryer from improvised materials.

Useful homemade products for giving - do-it-yourself washing

Not everyone has the financial ability to buy a Karcher car. If you can't buy it, why not invent it? Do-it-yourself washing will allow you to do without plumbing, reduce water consumption and thoroughly wash your car, fence, garden path or other items.

Here's what you need for such a homemade to give:

• plastic canister with a capacity of 5–20 l;
• hose connector kit;
• automobile nipple;
• piece of hose;
• silicone sealant;
• sharp knife;
• compressor or car pump;
• irrigation gun.

Take a set of hose nozzles, which includes 2 connectors, a 3/4 threaded fitting, a 1/2 adapter.

Here is the principle of operation of such a homemade product for giving: you connect the gun to the hose, attach this device to the bottom of the canister. A nipple will be built into its neck.

Fill the container with water, but not to the top. Then screw on the lid and pump air in. This will create pressure, and the water will run well when you start to pull the trigger of the gun. Here's how to assemble such a mini sink.

Carefully cut a hole in the lid with the tip of a knife. It should be slightly smaller than the diameter of the nipple stem. Also cut a circle of the desired diameter at the bottom of the sidewall of the canister.

Insert the nipple into the cap.

Now, helping yourself with the wire, place the coupling in the hole intended for it. Apply silicone sealant to secure the coupling to the canister.

It is necessary to tighten the cover and carry out other work only after the sealant has completely cured. Then you will connect one end of the hose to the water gun and the other to the canister.

Pour water into the container, but not to the top so that there is room for pumping air. But do not pump too hard, so that the canister does not deform and burst under pressure. See how the fitting should be screwed in and the connectors installed.

If everything is done correctly, then when you press the trigger of the water gun, the water will spurt out in a good stream. You can adjust the pressure by twisting the tip of the gun.

In the country, it is hardly possible to do without a shower. Try to make something unusual, but tropical, then you can enjoy even more water treatments.

How to make a rain shower from improvised materials for a summer residence?

If you have only recently acquired a plot and you do not yet have a washing room, then you can take a shower right on the street, enclosing a small area near the fence with a curtain. To make such a rain shower, you will need very few components, these are:

• bracket;
• wire;
• flexible hose;
• metal beer can;
• hose adapter;
• awl;
• nails.

Nail the metal bracket onto the wooden fence to get the fixture at the right height. Screw the adapter to the tip of the hose, fix it on the slot of the beer can. The joint can be treated with a sealant. Using an awl, make many small punctures in the jar.

Tie the top of the hose to the bracket with wire, and attach the other end to a water pipe or pump. When you lower the pump into a barrel of heated water, you will be able to enjoy pleasant water treatments.

You can also make a rain shower head using a disc container. In its center, you need to fix the plastic adapter that is attached to the shower hose, and the central axis of the discs must be removed. Using an awl, make holes at the top of the lid. Glue all fasteners well with sealant. Such a nozzle is held on the bracket with a thick wire or on a rigid pipe.

If you have a desire to make a rain shower, then you can use plastic pipes for this.

You need to bring water to them, first make a lot of small holes with a soldering iron, and then enjoy the pouring drops. Children really like such water procedures.

But do not forget to first check the water in the container from which it will be poured into the shower, it should warm up in the sun.

And to make a stationary shower, you must first pour water into a tank or barrel, which will be located under the roof or on the roof of the building. On a warm summer day, the water here warms up well, and you can wash yourself plenty. To be able to do this in cooler weather, then it is necessary to provide a heating system in such containers.

Do-it-yourself country shower

Before installing it, you need to make a shower cabin. If possible, you can make it out of wood by placing this small structure on the base. Put in a wooden door or go with a shower curtain like this.

There are also simpler options. If you have oilcloth, then use it.

Another option is to purchase impregnated fabric or use an old awning or tent.

If you made a fence from corrugated board and you still have materials, then try to make a shower for giving from them. Metal pipes need to be dug in according to the markup, poured with concrete. When it dries, cut sheets of corrugated board are welded to the racks. One of them will become the roof.

If you don't have enough wood planks, then implement the option shown in the next photo on the right. And on the left is a shower, which is made like a wattle fence. So the materials for it will cost almost free.

When the shower is ready, you can install a water tank on it. To make it warm up better, you can make a kind of metal or hose coil. Then the water will warm up more actively.

These and other homemade products for giving allow you to make the most of the available containers.

To be able to get warm water even when it is not heated by the sun, use electric heating. To do this, you can position the plastic barrel vertically or horizontally. Then it will be necessary to mount the ten on one side, and on the other? water inlet fitting. Make an overflow hole so that excess liquid flows out, and you can see that the container is already full.

Now it remains to install the tank. Usually, a shower roof is used for this. You can put a flat tank here, made of iron or plastic. You can also make a soul canister from a metal or iron barrel. If you need to heat the water, then a heating element is mounted in the barrel.

Check out other examples of what you can do in your backyard with your own hands.

Interesting homemade products for giving with your own hands

Garden tools are very necessary for working on the ground. Often in the store they sell not very high-quality sets. After a short use, the handle of the shovel breaks off, or the teeth of the chopper are bent. Therefore, if possible, try to make tools with your own hands.

Take:

• cutting;
• fragment of a water pipe;
• scrap from a two-handed saw;
• screws;
• screws;
• a fragment of a profile pipe with a cross section of 3 cm.

Using a grinder, cut a piece of pipe. Taking a lever tool, you need to cut a piece of pipe, unbend the sector, and in the place where the stalk will be, you need to work with a hammer to give the future chopper the desired shape.

To make a blade, take a piece of a two-handed saw and draw the outlines of a future chopper. Punch two holes.

At the same distance and the same diameter, you need to make 2 holes on the chopper itself, and then cut out a fragment from a two-handed saw.

Drill these holes with a drill and a drill designed for metal work. Connect these two parts with rivets, which are screws.

Now drill a hole in the top of the chopper to attach the handle here.

Make also a scoop, which is very interesting to work in the beds. Then such homemade products for giving will allow you to get a very durable set of tools.

Saw off the desired piece of the handle with a grinder and begin to unbend its part with a chisel.

Then, helping yourself with lever tools, straighten this part almost completely.

It remains to work with a hammer so that the scoop blade acquires the desired shape. Using a felt-tip pen, draw the outlines of its working part and cut it out with a grinder.

Using an abrasive wheel, clean the edges of the shovel and make them more even. Now process the tool with an emery petal wheel. That's how shiny this shovel will become.

Also drill a hole in it for the handle, then insert it and secure with a screw.

Cover the cuttings of both tools with an antiseptic, and then with varnish. Now you can use the tools for their intended purpose. If you want, follow the same principle to make a cultivator for beds.

It is very exciting to create such things for giving with your own hands. Maybe after you make the tools, you want to make a device on which you can dry part of the harvest. See how one gardener did it.

How to make a dryer for fruits and vegetables?

See what materials you need to take for this:

• sheet metal;
• square pipes;
• locking mechanism;
• polycarbonate sheet;
• self-tapping screws, screws;
• 2 door hinges.

But what tools you need to arm yourself with:

• grinder;
• welding machine;
• drill;
• stationery knife;
• tape measure and marker;
• scissors for metal;
• hacksaw.

First you need to make the basis for the drying cabinet. Make a frame from square pipes. Horizontal and vertical posts are sawn off so that the edges are even. And the ends on the connecting elements should be beveled.

The door here will be metal. To make it, cut 4 fragments from an iron pipe and weld them into a rectangle. Then you need to sheathe this base with metal, using screws with nuts and self-tapping screws. If possible, weld a steel sheet. To make a mount for baking sheets, attach wooden blocks to the back of the frame. Take self-tapping screws for this. In this case, on each side there are 4 wooden blocks for 4 baking sheets.

An absorber is installed in the dryer. Take sheets of metal and paint it black. Use heat resistant paint. When it dries, put this blank on the bottom of the dryer.

For the absorber, take a thick aluminum or copper sheet, in extreme cases, steel. These materials conduct heat well.

Now you need to sheathe the dryer from the outside, make the roof transparent, made of polycarbonate. Then the sun's rays will penetrate well here. You can also use glass. Cover the ventilation windows with mosquito nets to keep insects out.

Attach hinges and a locking mechanism to the door. Fasten the door in place. See what a wonderful beautiful and roomy dryer turned out.

It remains to make the opposites. They must be breathable. First, knock together the frames from the bars, and then attach a metal mesh to them.

Now you can cut fruit and watch how your device will work. Put a thermometer in the dryer to monitor the temperature. It should be in the range of 50-55°C. At lower temperatures, cover the lower openings by placing a rag here.

In such a home-made dryer, you can dry not only fruits, but also vegetables, herbs, fish, meat, roots.

If this diagram of the device of such a device seemed complicated to you, then you can make a dryer from a metal barrel. A hole for the door is cut out in it, and racks made of metal mesh are inserted inside.

So that water does not flow here and there is better ventilation, such a roof is installed on top.

You can upgrade this fixture with a fan and an electric heater inside.

If you want to make a lawn mower with your own hands, then this is also possible.

Turn an old washing machine into it, for example, like this one.

And if you still have an old bedside table, then you will make a platform out of it for a future almost self-propelled device. But you only need a door from the nightstand.

Drill holes in the center of the motor shaft. Make a cutting knife from an old two-handed saw. It is necessary to saw off from it to the size of the desired shape, cut a recess inside.

Attach two wooden pickets that will become the handles of the mower. Do not forget to fix the motor and extension cord to it. Now you can experience such an interesting unit.

If you are interested in other homemade products for giving, then it will be useful for you to watch the following video.

A lot of interesting ideas are waiting for you in the first video.

And you can get acquainted with cool homemade products from plastic pipes if you watch the second story.