What wallpaper to use for uneven walls. How to glue wallpaper on uneven walls

Various defects are often found on the surface of the walls in a house or apartment. To eliminate them, both time and financial resources may not be enough, and repairs must be continued. In this case, wallpaper for uneven walls will help deal with the issue. The wallpaper will hide the depressions and bulges present on the base. The masking of significant deviations will be completed by the correct arrangement of furniture, the use of embossed decorative finishes, and familiarization with the additional nuances of design will allow you to create a stylish, refined interior that emphasizes individuality.

What types of wallpaper can be stuck on uneven walls?

Ideally, it is better to glue wallpaper on even walls, because the workflow is greatly simplified: canvases fit comfortably, there are no problems with corners, but bringing the surface of the base to the appearance of an almost ideal plane will require additional costs. For self-alignment, you will also need certain knowledge, building skills and abilities.

A good result can be obtained using thick wallpaper. Suitable options for gluing, their description is given in the table below.

Types of wallpaper used on uneven grounds, their characteristics

№	Type of wallpaper	Description
1	paper	due to their thickness, the glued fragments do not stretch much, which reduces the likelihood of uneven bases on their surface after they dry
2	liquid	they can fill small cracks
3	vinyl	such products hide irregularities poorly, because their glossy surface visually highlights problem areas
4	non-woven	dense, embossed - they mask small and medium surface imperfections well

The table shows which wallpaper is better to glue on uneven walls. Glued non-woven (shown in the photo) or vinyl sheets will best help mask existing defects. This is a durable, durable wallpaper.

The materials considered in the table are represented by a wide range of products. Models differ in color, relief, thickness, pattern. Simple recommendations will tell you which wallpaper to choose for uneven walls. The rules are as follows:

choose wallpaper without clearly defined patterns with lines diverging in different directions, chaotic patterns;
selected rolls preferably have bright colors (such fragments can be glued to problem areas);
the color palette chosen for decorating the room should create a “game of contrasts”, or be completely monophonic;
canvases containing geometric shapes (stripes) are not recommended to be selected in the room;
for selected rolls, saturation with frequently repeated patterns (patterns) arranged randomly is desirable;
the use of liquid wallpaper on uneven walls can be carried out both by the complete design of the room with their help, and by finishing in separate sections.

The design example shown in the photo hides the existing problem areas well.

When wallpaper is selected for uneven walls, their thickness is constantly taken into account. Naturally, the larger it is, the better the canvas will mask the problem on the surface of the base. But it will be necessary to glue the measured strips with a special compound applied with a “solid” layer. With the help of vinyl products, a beautiful decorative finish is obtained that brings the various ideas of designers to life, and non-woven products are often used for further painting.

Wallpaper technology: preparation of the base and gluing

Before for curved walls, they will need to be prepared accordingly.

This simple procedure is easy to do with your own hands. All actions on consist in such manipulations:

existing old coatings are removed from the surface of the working area: whitewash, paint, wallpaper (in some cases it is possible);
if there is no finish and you just need to stick it on the plaster, then check it for delaminations, and if they are found, remove the pieces up to the rough base;
in all cases, cracks (especially holes) must be sealed with mortar;
the base prepared in this way is cleaned of dirt and dust;
you can apply a kind of fine corrugation on it with a metal brush to improve adhesion;
the wall is primed to reduce the ability of its outer layer to absorb glue;
after drying the first - form the second.

The work will require the use of the following set of tools:

roller:
containers for glue and water;
several spatulas: plastic and metal;
building level, tape measure, knife and pencil, rag.
devices for work at height.

In difficult cases, a hammer may be required.

When the base is fully prepared, proceed to gluing the strips. Actions are carried out in this order:

according to the level, markings are made on the wall surface so that the first strip captures the corner;
the working area is covered with glue, creating a base that must dry;
the cut piece is coated with the prepared composition and glued in the corner with an overlap on another partition (5 cm is enough);
the second fragment is fitted in a similar way;
a cut is made with a knife along the entire corner;
the cut pieces are thrown away, and the joining edges of the canvases are coated with glue;
the following strips are applied exactly at the joints so that no seams are visible;
in this way they paste over the entire room (the following photo shows the workflow);
depending on the material of the selected models, glue is used for either vinyl or paper wallpaper.

It is preferable to use a primer until the absorption of the applied solution into the coating stops. The gluing of the selected type of material must be carried out with a composition specially designed for it, capable of supporting the weight of the applied strips.

Recommendations for hiding significant surface defects

Quite significant depressions and bulges can remain noticeable even after gluing. How to hide the unevenness of the walls in this case? To do this, just follow a few tips:

the area with the existing flaw is covered with a picture, a mirror or a bookshelf, a TV, any decorative elements;
arrange furniture taking into account the present problem areas;
wallpaper is selected and applied so that visual effects are created throughout the coating, hiding the actual irregularities.

The photo below is an example of the correct design of the room.

A few nuances for gluing boil down to the following points:

before the wallpaper fragment treated with adhesive is leaned against the wall base, the applied composition is allowed to dry;
the adhesive that has come out after smoothing the canvas on the surface is removed with a clean rag;
if further staining is performed, then the dye is applied in the minimum possible amount so as not to strongly moisten the glued strips.

By observing the nuances and using additional tricks, you can achieve complete visual harmony. The created decorative coating will help to hide all the curved areas from the eyes, and the beautiful design will last for many years.

What wallpaper to glue on uneven walls depends on individual preferences and personal financial capabilities. Decorating rooms with this material allows you to achieve visually impressive results. Compliance with the technology and nuances of gluing allows you to hide all the curvature with minor deviations from the norm. Medium-sized defects will allow you to smooth out additional tricks of interior design, but if you first plaster the work surfaces according to the level, it will be easier to paste over.

Recommendations for leveling walls with wallpaper contains the video below.

Smooth and repaired walls and corners are the key to a properly carried out repair. Wallpaper pasted on such surfaces will look presentable, regardless of the appearance of the quality of the finishing material itself. But to align the walls and corners, you need to spend a lot of time and building materials. For example, you will have to apply two or three layers of putty, each of which must dry for at least a day, a primer is applied in three layers, it will take 6-8 hours for each layer to dry. Add here the application process itself. So it will take several days to level the walls and corners.

And if there are no opportunities, time, money and desire to engage in leveling activities, then you can try to glue wallpaper on uneven walls. For this, you should not use paper wallpapers, photo wallpapers with a small vertical pattern, canvases on which dependent patterns are applied, because it will simply be impossible to fit them together. What are possible?

Thick vinyl and non-woven wallpaper will suit this situation just right. At the same time, experts note that it is better to use non-woven trim in living rooms, bedrooms, and halls, because it is more noble in appearance. And vinyl is better to use when finishing kitchens, hallways and other office premises.

It should be borne in mind that the substrate of non-woven wallpaper is the thickest of all the options considered. Therefore, it is this category of wallpaper material that is considered the best when it comes to gluing wallpaper on uneven walls and corners. And one more thing that worries many consumers. This theme has a breathable structure of selectable wallpaper. It should be noted that today almost all wallpaper categories and groups are such. Currently, new technologies make it possible to produce vinyl and non-woven wallpapers with micropores through which air can easily pass in two directions.

Vinyl and non-woven wallpaper sticker technology

In fact, it is not difficult to glue wallpapers of these two categories on uneven walls and corners. But there are certain specific nuances. For example:

Gluing is done only end-to-end.
The adhesive composition is not applied to the surface of the wallpaper, but to the wall being trimmed.
You need to use glue designed for stickers of a certain type: either only for vinyl, or only for non-woven.
When dried, both species do not decrease in size.
The synthetic base does not allow peeling from the uneven surface of the wall, which guarantees the long-term operation of the wallpaper finish. By the way, in places where the plane drops, the paper wallpaper peels off and swells due to the uneven tension of the canvas.

Attention! If the room has uneven walls and ceiling, then in the corners between them the curvature of the laid wallpaper will be very visible. Therefore, it is necessary to install a ceiling plinth in the corners of the room under the ceiling, it is better if it is plaster, not polyurethane. The second one looks very simple with noble wallpaper.

So, the wallpapering technology consists in the fact that markings are first applied, along which strips of finishing material are laid. Usually the process starts from the corner with the advancement along the wall. But since the corners of the room are uneven, it is necessary to close them correctly. Therefore, the canvas is laid in such a way as to immediately cover an uneven corner with its part. For example, as shown in the photo below. That is, you should not join the edges of two canvases in the corner of the room.

You can, in principle, use the standard technology with overlapping edges of the wallpaper in the corner section.

The first strip is laid on the wall adjacent to the window. At the same time, the edge of the material reaches a wall with a window for a length of 3-5 cm (this section is not glued).
The second strip is laid on the wall in which the window opening is located, exactly along the vertical line of the corner with the same overlap (it also does not stick).
Now, with a sharp knife, you need to make a cut along the corner, cutting off the non-glued edges of the two wallpaper strips. They are removed, and the new edges are smeared with adhesive and pressed against the surface of the wall.

Note! You will only have to cut once, so you can not allow the cut to turn out uneven. Therefore, use a metal ruler for this, and the process itself must be carried out in one breath. No pauses or "try again". Clear, smooth and fast.

Alternative ways

It should be noted that it is possible to glue wallpaper on curved walls, but it is not always possible to hide their large defects. This is especially true for recesses. Filling them with putty is quite difficult, this is not a crack or a chip in which there are sharp edges. For them, the putty mortar is well fixed. A deep recess is, in fact, a depression. Covering it with wallpaper, we get a void under the finishing material. Therefore, you have to fantasize.

Look at the photo above. Here is one of the options for how you can hide the large unevenness of the wall, trimmed with wallpaper. In this regard, the wallpaper itself is laid in a wave, thereby hiding the flaw. At the same time, the design approach solved not only the problem of the wall surface, but also made it possible to make the interior of the room original. Wave decoration is really beautiful and unusual, but it is also functional. Shelves turned out on the wall, which, due to the dense structure of the material, can withstand certain loads. In any case, a couple of books on them will calmly hold on.

Or like the one pictured above. The place of the large drop is covered by a large mirror. Of course, this will have to take into account the wishes and capabilities of the owner. That is, whether he needs the same mirror in this place. Or whether it will fit into the created interior. Although the mirror is just one of the options. For example, you can close an uneven wall with a large piece of furniture - a wall or a slide. Hang a photo or picture. Lots of options.

Another possibility is to hide the unevenness of the wall. To do this, you can use wallpapers saturated with the same type of repeating pattern of an even geometric shape. Such a drawing blurs the boundaries purely visually, it seems to smooth the surface with its repetition. That is why defects under the finish are not visible. It is impossible to say which of the proposed options is better. Everyone chooses for himself. It is important to glue the wallpaper correctly, exactly according to the technology, so that they themselves do not become a wall defect.

So, you can glue wallpaper on uneven walls. What technology to choose - only the owner of the house decides.

How to glue wallpaper on curved walls. Curved walls and corners

Since not all walls and corners, especially in older houses, are even, many people ask how to glue wallpaper on curved walls.

In this article, we will try to answer these and related questions, as well as analyze which wallpapers are suitable for curved walls.

Because the following information is specific, it may not apply to all cases.

And if your walls are even and the corners are perfect, just skip this article and read something else on our website oboi-steny.ru.

Wallpaper for uneven walls: features of use, selection and installation

Before gluing, it is worth trying to align the walls and corners as much as possible.

The smoother the surfaces, the easier wallpapering will be!

2. At the second stage, it is important to choose the right wallpaper for curved walls.

The best option would be thick vinyl or non-woven fabrics with a matte or voluminous, but independent pattern.

For curved walls and corners NOT suitable:

thin paper wallpaper;
tapestries with a smooth vertical pattern;
canvases with a dependent pattern that has to be customized;
wallpapers of all types.

3. To decide how to glue new wallpaper on curved walls, it is best to start from the window.

In this case, the first sheet must be glued exactly along the vertical line.

For perfect markings, use a level and a simple pencil.

4. The first sheet of wallpaper in a room with curved corners is glued to the wall adjacent to the window so that there is an overlap on the “window wall” of 3 centimeters.

5. The second strip is glued to the wall with a window and slightly superimposed on the outgoing section of the first sheet.

A longer ruler (or spatula) is taken and applied to the line of intersection of the second sheet with the first.

With the help of a knife along the ruler (or spatula), a deep cut is made in one go, for which the knife is not removed along the entire cut line, but only the ruler is shifted below.

IMPORTANT - the cut must be performed in one breath, without removing the knife!

7. When the cut is made along the entire height of the canvases, you can remove the upper and lower cut sections by aligning the first or second wallpaper sheets with a joint.

The joint should be even.

And to avoid mistakes, you can try trimming on some stand - on a clean and empty section of the wall, for example.

The quality of the cut is very important and you only get one try!

The main thing is to monitor the vertical position of each next canvas and make the necessary trimmings in the corner sections.

9. You can hide unevenness in the floor area with a small wooden or plastic skirting board for the floor.

10. Irregularities in the ceiling area are hidden with the help of a baguette or panels.

Since we were talking about non-woven or vinyl wallpapers above, which look luxurious and expensive, it is better to give preference to gypsum or wooden carved ceiling skirting boards.

If you use cheap foam ceiling skirting boards here, their lack of solidity and cheapness can spoil the whole picture.

11. When wallpapering on curved walls and corners, make sure that the joint does not lie exactly in the corner.

If this happens, then it is extremely difficult to adjust the evenness of the joint along the uneven line of the corner (how to mask the joints).

As an option, glue the adjacent wall with a slight overlap on the problem area, trim as described above.

If all the above procedures seriously scare you, if you have doubts about your own abilities, you could hire a team of specialists.

At the very least, experienced workers will make curved walls and corners as invisible as possible. And along the way, you yourself will learn the simple technique of wallpapering on uneven bases.

Is it possible to glue wallpaper over old wallpaper

: how to glue paper wallpaper. : paper wallpapering

What wallpaper to glue on the ceiling. The choice of wallpaper for the ceiling

How to wash vinyl wallpaper

How to glue wallpaper on drywall. Preparing drywall for wallpaper

How to glue non-woven wallpaper. Gluing features

How to glue paper wallpaper

How to glue non-woven vinyl wallpaper (step by step)

http://oboi-steny.ru

There are many flaws that spoil the walls and complicate repairs: cracks, bumps, remnants of old coatings.

Ideally, before wallpapering, the surface is carefully prepared.

But if the defects are not pronounced and there is no time for alignment, there are several solutions that can help hide the imperfections and speed up the work. Let's figure out how to choose the right wallpaper for uneven walls.

Solution 1. Wallpaper with a bright pattern

WALLPAPER VICTORA STENOVA GRAFFITI 998174

If the walls are not even, then you should give preference to wallpaper with a pattern. Plain coatings will only emphasize all the flaws and spoil the overall look of the room.

Abstract, randomly located pattern is best suited for uneven surfaces. It will divert attention to itself, and the flaws of the walls will be almost indistinguishable.

The right choice would be fine pattern wallpaper, for example, flowers or monogram. However, a pattern that requires selection of a pattern should be avoided, otherwise the joints will further highlight the recesses and elevations on the walls.

For non-ideal surfaces, wallpaper with a geometric pattern is contraindicated. Any distortion of straight lines will immediately catch the eye and indicate all the flaws.

Another important question is how to choose the color of the wallpaper for uneven walls. Light shades have the opposite effect: they increase the visibility of flaws. So it's better to choose dark or saturated colors. If such wallpapers are perceived hard and seem too gloomy, you can use a combination.

Uneven walls: hiding imperfections behind wallpaper

A bright accent strip covers the section of the wall where the irregularities stand out most clearly, and discreet wallpapers are glued to the even parts.

Solution 2: Textured wallpaper

WALLPAPER BRAVO STEIN 80583BR23

Ordinary smooth wallpapers do not cope well with surface imperfections, but textural ones can hide them more effectively. Such wallpapers include varieties of vinyl and non-woven coatings and photo wallpapers. The most important thing is the convex pattern.

foam vinyl does the job perfectly. The dense base and voluminous relief of such wallpapers will mask the flaws and decorate the room. hot stamping also suitable for such cases. These coatings are durable and have a textured surface, which means that imperfections will be completely invisible.

Non-woven wallpaper for painting— an indispensable assistant in the repair. You can choose different relief patterns and paint them in a suitable color. In this case, the irregularities will visually disappear, and the walls will appear even.

Wallpaper and photo wallpaper, imitating natural textures, well cope with problem surfaces. Coatings for stone, brick or plaster create a special stylistic mood in the room and turn wall imperfections into virtues.

It is important that such wallpapers are matte. The play of light and shadow on glossy wallpaper will make the bumps visible.

Solution 3: Thick wallpaper

WALLPAPER MIRABELLA ANACAPRI 1 37301

Wallpapers differ in the density of the material from which they are made, which means they have different masking ability. Single-layer paper wallpaper is the thinnest option, so it's not the best way to fix wall imperfections. For such cases, duplex, consisting of two layers of thick paper, is more suitable. These coatings are inexpensive and easy to use.

The properties of vinyl and non-woven wallpaper are much better. Vinyl-coated coatings, especially foamed and hot embossed, have increased density- 200-250 g / m 2, and for some manufacturers it can reach up to 400 g / m 2. They easily tolerate cleaning, are resistant to damage, but most importantly, they hide the unevenness of the walls.

Non-woven wallpaper is heavy and has a significant thickness. This means that they will not only last for many years, but also save time on preparing walls and sealing small cracks.

There are few differences between how to glue wallpaper on uneven walls and pre-prepared ones. But there are several nuances that affect the final result:

stripes are measured with a margin. The worse the quality of the walls, the more centimeters you need to add on top and bottom of the panel;
if the walls are noticeably curved, then a plumb line and a level are used when gluing the canvases. The first strip is glued strictly vertically, and the rest are aligned along it;
to make the joints of the wallpaper smooth and strong, it is better to glue the wallpaper with an overlap. Otherwise, distortions on the walls will ruin the final result;
small distortions are successfully hidden by high-density wallpaper - vinyl or non-woven. They can be glued end-to-end;
if the ceiling also has defects, then the uneven edge of the strips can be covered with a ceiling plinth.

Walls with defects and irregularities will not interfere with high-quality repairs and a beautiful interior. The most important thing is a competent approach to the choice of finishing materials and taking into account the peculiarities of their gluing.

Choosing wallpaper for uneven walls: 4 types of coatings that will hide irregularities

If such a question occurred to you, then you do not have either the time or desire, or money to properly prepare the walls for wallpapering.

Not the best option, but you need to get out of the situation ... This will help you with a few tips from professionals with many years of experience who have seen different walls and different wallpapers.

We asked the question: “What kind of wallpaper to glue on uneven walls?” several masters and systematized the answers.

First, about which wallpaper to glue and curved walls can not be categorically:

Any shiny (glossy) wallpaper is especially smooth. They will highlight any irregularities very strongly.
The same can be said about any thin wallpaper, they are simply fitted and all the imperfections of the walls.
Wallpaper with geometric patterns, especially with stripes, will not fit categorically. Any distorted straight line is immediately visible.
White and light wallpaper. As a rule, if the alignment of the walls is not done, then the color for them will be spotty and all this will shine through.

Now about what options remain in stock, so that despite the uneven walls, the glued wallpaper hides the shortcomings of the preparation and, in general, everything looks decent:

It is better to take paper wallpaper or paper-based vinyl - they are better adapted to such tests, and when dried on an unprepared surface, they stretch and can hide some of the depressions on the walls.
The color of the wallpaper is quite dark, for example brown.
Necessarily matte surface, the relief will not be superfluous at all, foamed vinyl, embossed
The drawing should be abstract and large (large flowers, leaves, various color spots, or very small and not periodic.
It is advisable to find wallpaper without a pattern, i.e. those that do not need to join the picture. Exact docking on uneven walls will not work and, as a rule, it is uneven joints that spoil the appearance the most.

That's all the main

From the author: summer is in full swing, everyone is relaxing and enjoying the sea, and you have to urgently fix repair defects and figure out how to hide uneven walls? Welcome to our website, we are ready to help and tell you about the main design secret. We are working on the mistakes and determining which wallpaper to choose for uneven walls! Let's try to find a solution together.

First you need to decide on the design, layout and choice of materials, and finally - with the final type of finish: whether it will be plaster, drywall or decorative wallpaper. Agree, this sequence corresponds to most construction and repair work. It is quite difficult for yourself to decide what to choose, especially with the existing volume of offered building materials, as well as informational articles on the World Wide Web. We will try to help you with this. You have already taken the first step - choose our site!

Assessment of the situation: we carry out surface troubleshooting

Smooth walls are very good, because such a surface quite easily allows you to perform finishing work of any complexity, and even more so wallpapering. But, sadly, very few can boast of a perfectly flat wall surface in their premises, especially in standard old apartments.

Important: in a situation with large differences and obvious defects on the walls of your rooms, you need to approach the implementation of repair work with proper consistency and thoroughness, so to speak. Uneven walls can and should be leveled! If the defects are minor, then you can save money and time and use design secrets.

When choosing wallpaper in a situation where there are uneven walls, it is important to be guided not only by personal taste and preferences regarding colors and style, but also by the problem of defects. Manufacturers, of course, are aware of the existence of such a problem and are ready to offer a fairly wide selection of wallpapers that can be glued without much difficulty on problematic walls. After all, due to their characteristics, appearance and performance properties, they are suitable for gluing on any surface, including those with protrusions, bumps and recesses. Texture and pattern will help to hide, camouflage defects and uneven walls. So it remains only to decide which wallpaper to choose.

And what do our experienced craftsmen advise us, what kind of wallpaper do they prefer during repairs in order to hide irregularities? We invite you to listen to recommendations:

Types and characteristics of wallpaper

Consider a photo and the most common types of wallpaper that can be successfully used for problematic walls.

Duplex

If you stick ordinary paper wallpaper on walls with defects, then all these shortcomings will clearly appear in you. Manufacturers offer to use a special type of paper wallpaper, which is called duplex. They are made of two dense layers of paper, which are pressed into one piece and feel like cardboard to the touch. They also have various types of embossing and often repeating pattern, which allows you to hide irregularities. Among other things, they hold their shape well and adhere well to an uneven wall, because they do not need to fit snugly over the entire surface. All potholes and bumps will be hidden! And for the price, such wallpapers are very affordable, any layman can afford them.

Important: An additional property of the duplex is environmental friendliness, which allows it to be used in the nursery and bedroom!

Source: this-oboi.ru

Vinyl

Durable and bright. Vinyl samples are a good alternative to duplex wallpaper, although they are already in a higher price segment. They will serve you for a long time, remaining bright and fresh. In addition, the unevenness of your walls does not stand out so much on bright wallpaper, and the thickness and deep texture will hide the most complex defects. Among other things, they have the ability to copy the texture of natural finishing materials, which will give your room a noble, “rich” look.

Source: albereromarket.ru

From the total mass of vinyl wallpaper, which are used when decorating walls with irregularities, the following areas can be distinguished:

a fairly simple and inexpensive option is foamed vinyl, its sufficient thickness will hide all surface defects. The disadvantages include the relative fragility of this material, as well as its insufficient strength. However, from the aesthetic side, such wallpapers will look better than duplex ones, we advise you to pay attention to them before considering more expensive options;

Source: repairiruem.com.ua

washable vinyl wallpaper will look good and practical in the kitchen. It should be borne in mind that it is the bulges of your walls that will be clearly visible on their glossy surface, so we advise you to remove them, let the recesses and pits remain better;

Source: kuhniclub.ru

a wonderful option is hot stamping vinyl wallpaper - the canvas is the densest, strongest and most durable. They can be washed repeatedly, and the structure allows you to hide fairly large areas of wall irregularities. The only thing we advise is to abandon the glossy pattern of such wallpapers, since it will flicker at the kinks in the places of depressions and bulges. The price of such wallpapers is quite significant, but their quality, respectively, is impeccable.

Very often, when starting repairs in an apartment, people are faced with the problem of uneven walls. The situation is as follows - the defects of the walls turn out to be clearly distinguishable, and the work to eliminate them will cost the owners of the apartment a pretty penny. Therefore, they prefer to simply hide the unevenness of the walls behind beautiful wallpaper, without wasting energy on additional repair work. Of course, in the case when the situation with the curvature of the walls is very bad, it is necessary to bring them into a more or less presentable form, and only then glue the wallpaper. In the article we will tell you how to choose the right wallpaper for uneven walls.

Gluing wallpaper on uneven walls is a fairly common method, and therefore manufacturers often meet halfway, developing a wide variety of wallpapers from various materials and with beautiful patterns. But not all materials can be used, since some types of wallpaper (paper, liquid, photo wallpaper), on the contrary, will emphasize the existing defects.

What wallpaper will hide unpleasant flaws? Most experts unequivocally recommend vinyl and interlining as a kind of panacea for this scourge. Naturally, you will have to spend money on purchasing materials, however, by choosing materials that hide significant wall defects, you can give your home a cozy look.

The essential difference between vinyl and non-woven is as follows: the very structure of the material in both cases is characterized by excellent density and multi-layeredness, which allows you to visually give the walls an even look. Vinyl looks more “glossy” (has a noticeable shine), interlining, in turn, is matte and smooth. That is why it is recommended to glue the hallways with vinyl, and the bedrooms with living rooms with non-woven lining. These materials will suit even the most demanding apartment owners, since at the moment, manufacturers, taking into account all the nuances and wishes, produce vinyl and non-woven wallpaper with micropores - therefore, the walls will “breathe”, and the argument about the “non-environmental” materials is now irrelevant.

Among other things, gluing these types of wallpaper is quite simple: the main feature is that the glue is not applied to the sheets themselves, but to the surface of the wall. Thus, it remains only to attach a sheet to it strictly vertically - and you're done! Due to the specifics of the material, on uneven areas, wallpaper sheets will not move away from the walls due to uneven tension.

If you use such wallpaper, you can successfully hide the bumps in the walls. However, the market offers a huge selection of vinyl and non-woven, so let's try to figure out what varieties of these materials exist.

Varieties of vinyl

Today, several different types of vinyl are produced, trying to please even the most demanding consumers. The common thing is a rather dense structure, and sometimes an imitation of natural natural materials, which we can rarely get because of the price.

Foamed. The most budget option for those who want to get rid of the problem without extra effort and spending money. Due to the fair density and texture, defects are reliably hidden from prying eyes, plus, the appearance of a 3D effect is often created, which many will like. The only drawback is the fragility of the decorative coating itself.
Hot stamping. Sheets of this type can boast of considerable thickness, as well as excellent mechanical strength, vinyl has an extremely dense texture that perfectly covers any visible defects. Among the advantages, excellent water resistance is distinguished, so feel free to carry out wet cleaning - it will not affect the quality of vinyl in any way. However, when choosing this type, it is recommended to pay attention to varieties that have a matte finish instead of a glossy one.
Washable. It is not recommended to use when hiding significant defects, because due to the glossy sheen, the masking effect disappears. Although in the case when it is required to visually smooth out minor irregularities, the use of washable vinyl is acceptable. Among other things, it tolerates wet cleaning perfectly, and you don’t have to live in a room with dirty wallpaper.

Varieties of non-woven:

Non-woven fabric boasts an excellent density of fibers and the presence of embossed embossing on the surface of the sheets, which is why it is an excellent assistant in visually smoothing out wall irregularities. The material is very dense and rigid in structure, and some manufacturers add a decorative detail in the form of a vinyl backing.

Non-woven wallpaper differ in white and painted. The second option is much less common, since interlining is produced for painting in most cases. It should be noted that direct painting is carried out after the sheets are glued to the wall, choosing special water-based paints (for example, acrylic), since solvent-based compositions corrode the non-woven surface. After staining, the material acquires a matte appearance, therefore, any defects and irregularities will be practically indistinguishable.

Choosing a pattern texture

Wallpaper for uneven walls selected, it remains to be determined with a drawing. We immediately brush aside all kinds of geometric prints - on uneven areas they will turn out to be distorted. It is recommended to make a choice in favor of chaotic prints and bright patterns, since attention from defects will be diverted as much as possible.

And here is an option designed for lovers of calm colors in the interior. Some experts advise resorting to a kind of design technique and gluing bright wallpapers only in areas with pronounced irregularities (choosing a color that blends harmoniously with the main part of the wallpaper). Of course, such an operation should be done wisely so that the room retains an aesthetically attractive appearance.

home > Mathematics