How to make colored homemade stickers. Rules for making a vinyl sticker at home Making a sticker with gelatin glue

Are you looking for a new creative project? Try making stickers! They are easy to make right from scrap materials you probably already have at home; You can also create professional-looking stickers using self-adhesive paper, which is easy to find at any office supply or craft store. After reading this article, you will learn how to make stickers in three different ways: based on glue, using tape or self-adhesive paper.

Steps

Production of adhesive stickers

Come up with a sticker design. With self-made stickers, your flight of fancy is not limited by anything. Use whatever drawing medium you want: colored pencils, markers, pastels, wax crayons, whatever. Make sure that the markers, pastels, and other drawing media you use are water-resistant. Draw the sticker design on a separate piece of paper or directly in a notepad. Consider the following ideas as you think through your design.

Draw a self-portrait or portraits of your friends or pets.
Cut out graceful images and phrases from magazines and newspapers.
Print pictures from the Internet or images you have on your computer. For best results, print them on thin printer paper, not photo paper.
Use ready-made sticker templates from the Internet that you can print.
Make pictures with decorative stamps.
Decorate the image with sparkles.

Cut out stickers. Use scissors for this. Make stickers as big or small as you want. For patterned edges on stickers, use shaped scissors to create an interesting cut pattern.
- Try using shaped hole punches to make hearts, stars, and other shapes out of patterned paper.
Prepare the glue. This glue is safe for children, similar to the one used on envelopes. It will provide adhesion of the sticker to most types of surfaces, but it does not contain harmful chemicals. To make the glue, mix the following ingredients in a bowl until a homogeneous mixture is formed:

Apply adhesive to stickers. Lay the stickers back side up on a piece of waxed paper or aluminum foil. Take a paint brush or a baking brush and brush the back of the stickers with glue. When you are done, let the glue dry completely.
- There is no need to completely soak the stickers with glue, just apply it in a thin layer.
- Make sure the stickers are completely dry before using them.
- Store your finished stickers in a plastic bag or plastic box until you are ready to use them.
To apply the sticker, lick it from the back. When you're ready to stick your decal to a surface, simply lick the back of it like you do with stamps, then briefly press the decal onto the desired surface. Homemade glue is strong enough, so be careful when sticking the sticker.

Making stickers with adhesive tape

Cut out images from magazines or print your own sticker designs. For this method, you need images that have been printed on paper using waterproof inks. You can use the glossy pages of magazines or books, or you can experiment with your printer's inks and try printing options from your computer. If you are printing pictures, make a test piece first to pre-wet it to test for durability before you start making the actual stickers. Cut out the images and phrases you like with scissors.
- When selecting images, do not forget about the width of the adhesive tape. Each sticker must fit within the width of one of its strips. This means that the picture should not be wider than the adhesive tape.
- If you want to make a larger sticker, you will need to line up two strips of tape. It may not be so easy. You need to align the tape in such a way that its strips overlap quite a bit, and at the same time the paper does not look through between them. In case of an unsuccessful attempt, your sticker will be damaged. If successful, only the seam at the point of contact of the strips will be visible on the sticker.
Cover the sticker designs with tape. Cut out a piece of clear tape large enough to completely cover the cut out sticker design. Stick it on the front side of your cut or printed design. Press the tape against the paper so that it adheres well to the drawing.
- Be careful when you stick the tape on the image. It is necessary to change its position, and the picture will tear. Also try to make sure that there are no air bubbles or wrinkles when sticking the tape.
- Consider using double sided tape. Double-sided tape is available in various forms: in rolls, sheets, and even as part of special machines for making stickers, for example, the Xyron brand.
- Consider using Japanese paper tape (washi tape). It is similar to tape and is great for making stickers because it sticks when you want it and also peels off easily if you need to. Japanese paper duct tape comes in a variety of colors and patterns. If you want to make stronger stickers, you can use duct tape.
Rub the front of the sticker. Take a coin or use your fingernail to press down on the front of the sticker and rub the surface to get the ink on the paper to bond with the adhesive on the tape. Continue rubbing the sticker for a few minutes to make sure the ink bonds to the adhesive backing of the tape.

Rinse stickers in warm water. Take the stickers one at a time and rinse them under water, put the paper side under the stream until the paper starts to fall off. The ink will not be washed off with water, and the paper will completely dissolve. You can speed up the process by rubbing the paper.
- Make sure you wet the entire surface of the tape at the sticker, not just part of it. If you concentrate your efforts on only one area, then only this area will be visible on the sticker.
- If the paper does not fall off, continue soaking the sticker under warm water.
- Alternatively, soak the stickers in a bowl of warm water. Completely submerge the stickers in water and leave to soak for a few minutes.
Let the stickers dry. After removing the paper, allow the stickers to dry completely so that the adhesive layer of the tape becomes tacky again. Use scissors to trim the excess tape around the decal design, then stick the decal to the surface of your choice.

Making stickers from self-adhesive paper
1. Buy self-adhesive paper. In craft or office supply stores, you can find paper that has an adhesive layer on one side. It is usually protected by a backing which is removed when the paper needs to be adhered.
2. Design your stickers. Draw stickers on your computer, or use markers or pens to draw pictures directly on the adhesive paper. You are only limited by the paper size. You can even make an A4 sticker if you want!
  - Draw stickers on your computer using Adobe Photoshop, Paint, or another graphics program. As stickers, you can simply use photos from your personal album or from the Internet. When you're done, print the images on self-adhesive paper.
  - If you have a printed photo or drawing that you want to make a sticker from, simply scan it or download a digital image source to your computer. Edit this file in Photoshop, Paint, Word, or Adobe Acrobat, then print on self-adhesive paper.
  - Draw pictures directly on self-adhesive paper using pens, pencils or paint. Just don't wet the paper too much, otherwise you could damage its adhesive layer.
3. Cut out stickers. Use scissors to cut out printed sticker designs. You can cut the stickers into simple rectangular shapes, or use special shaped scissors to create interesting patterned edges. Your stickers should be spaced about three millimeters apart on the sheet so that when you cut one sticker, you don't accidentally damage adjacent stickers.
  - When using double-sided adhesive sheets, simply tear off the protective backing, exposing the adhesive layer of the sheet. Attach the stickers with the back side to the adhesive layer. Press them down so they stick well. Then tear off the sticker with the adhesive layer from the second substrate - now your sticker is sticky from the back. Stick it to any surface of your choice. You need to stick the sticker right away, as you have removed the protective backing from it.
  - You can space the stickers on the sheet further apart to allow white borders around the images, or you can cut the stickers without these borders. People who are already experienced in creating stickers sometimes leave no boundaries at all and cut out stickers with a clerical knife.

Making stickers yourself is not such a difficult task. How to make stickers with your own hands we will tell in this article.

It will take very few materials and the original sticker is ready to use.

There are different options for making stickers.

Printing on special paper

Stationery stores sell ready-made self-adhesive paper. It is well suited for any type of printer.

Such paper can have a single self-adhesive sheet, or it can be divided into sections. In this case, you need to accurately determine the size of the drawing or inscription, as well as correctly position them in a text or graphics editor so that the image does not overlap with the adjacent area when printed.

Also, if you have the ability to draw, then you can make a drawing with an indelible marker.

Making stickers with tape

An inkjet printer will not work here, you will need to use a laser printer.

From the materials you will need paper, adhesive tape of a suitable size and a hair dryer. We select the appropriate image and print it on plain paper. Scotch tape is glued on top of the picture and gently smoothed out. We crop the picture, leaving allowances. We fill the container with warm water and immerse the picture there along with the adhesive tape for a few minutes. After that, place the sticker under warm running water and carefully remove the wet paper.

After all the paper is removed, the imprint of the picture will remain on the adhesive tape. After that, the sticker should be left to dry. The adhesive properties of the dried adhesive tape will be restored.

The finished sticker is cut to the desired format.

Making a sticker using double-sided tape and baking paper

For such a sticker you will need: a printed, drawn or cut out picture, double-sided tape, baking paper. Double-sided tape is glued to the back of the sticker. Then the second protective layer is removed from the adhesive tape, and the sticker is glued to baking paper. The properties of this paper are such that the adhesive tape adheres to it firmly, and at the same time it can be easily removed without damaging the paper itself.

After the sticker is cut to the desired shape. These stickers are easy to store without worrying that the adhesive layer will deteriorate or get dusty.

In specialized stores you can buy a special vinyl film. A pattern is applied to this film and cut out along the contours.

This film also has a self-adhesive layer.

Making stickers with gelatin glue

Boil a bag of gelatin with 4 tablespoons of water and a teaspoon of sugar.

The mixture should be homogeneous. Cool the resulting composition a little and pour into a container with a lid. A small jar of baby food works well. Leave the glue in the refrigerator overnight. When glue is needed, the jar must be placed in a container with warm water and wait for it to liquefy. Apply glue with a brush.

Handmade stickers have their own style. You can choose any theme and suitable size. In addition, this is a significant budget savings.

Hi friends! When was the last time you cleaned up your workspace? Documents, tools and other things were laid out on the shelves. Of course, you can decompose and remember these places once, but it’s better to sign them. This will more strictly maintain the order of things in their places. But how to sign them? Today we will analyze various options for making stickers or stickers based on paper.

So, to make the simplest version of the sticker, we need printer paper and glue. Of course, the sticker can be drawn or written by hand, but as they say, I am an artist from the word "Bad", so I prefer to use computer technology in all design matters. In any editor available to you, we make an inscription with or without a picture.

How to make a sticker with your own hands

We print on the printer, cut it out and glue it in the right place. That's all. But this method has its drawbacks. This is the durability of the sticker. She can rub, tear. If it was printed on an inkjet printer, then ink may spread from accidental moisture.

I improved this method a little by adding some adhesive tape to the sticker, of course, stationery. Adhesive tape allows you to protect the sticker from all the above disadvantages.

The technology for using adhesive tape for stickers is simple. It is necessary to carefully apply the front side of the sticker to the adhesive side of the adhesive tape, so that a few millimeters of the free area of the adhesive tape remains on its sides. If the sticker is small, then cut off the excess tape. Next, turn the sticker over and apply it to the desired location. Gently smooth the tape around the edges. The manufacture of such a sticker does not require the use of glue. And outwardly it will look like laminated. This method also has its drawback. This is a limited size sticker with a scotch width, usually 5 cm, but that was enough for me. To make a larger label, use self-adhesive printer paper. Print the desired text or picture, cut and glue. Only now it will be necessary to fork out for such paper, and even all the shortcomings of ordinary paper are inherent in it. And do you need it?

Especially for readers of the blog "Your computer" are developed canning jar stickers. The set consists of 4 sheets of 15 colored stickers of different themes: "Jam", "Jam", "Compote", "Pickles". Print them on a color printer and stick them on the jars with adhesive tape.

Download pdf sticker set for canning jars. Happy canning.

Yes, I almost forgot. On the Internet, I came across another way to make stickers based on adhesive tape. Only for its implementation it is necessary to print an inscription or a picture on a laser printer. not suitable for this method. Everything is done as I described above, only before gluing the paper base is soaked in water and gently washed off. The image remains on the adhesive tape. The advantage of this method is that the background of the sticker is transparent. These are the ways you canmake a stickerwith your own hands. Choose!

Dear reader! You have read the article to the end.
Did you get an answer to your question? Write a few words in the comments.
If no answer is found, indicate what you are looking for.

In a house where there are children, there is a lot of waste of money. Either the kids need a new toy, or a book, or something else. In this article I would like to talk about how, at home, to at least a little, but save money and make the sticker exactly original.

Method 1

It will be easier, of course, to just buy a sticker in a store or order it from a printing house according to your own layout. However, it's not that interesting. So, how to make a sticker at home? In this case, you will need color or inkjet), as well as (it must match the printer). Now it remains to print the selected pattern, cut the film along the contour and stick it on the required surface - a car, a laptop cover, etc.

Method 2

Method 3

The next way is how to make a sticker at home. To do this, you need to select a suitable pattern, print it or cut it out, and then glue it to the desired surface (necessarily pre-degreased) using ordinary glue (PVA or silicate - depending on which surface the pattern will be glued to). The method is quite simple, but such stickers are short-lived, because they are not protected from moisture, they can quickly fade in the sun. By the same principle, you can plant drawings not on glue, but this is also a good option, but its disadvantages remain the same.

Method 4

A sticker can be prepared at home using the usual one. It is interesting that such a pattern will be glued specifically to clothes. To do this, you need to cut out the selected pattern from the bag, attach it to your pants or T-shirt, cover it with parchment paper (you can use baking paper of any color) and iron it well with a hot iron. If the pattern does not stick the first time, the operation should be repeated. It is worth noting that small drawings will stick better, because the iron can easily walk through them at a time.

Method 5

Now I want to talk about how to make a vinyl sticker, but this will require the help of a printing house. First you need to prepare the layout. To do this, the selected drawing must be presented in vector form (this can be done independently using the Corel program). If there are no such skills, the printing house workers will gladly come to the rescue. The image is then transferred to film. This can also be done in a print shop, but you can try to do it yourself. To do this, you need to purchase a special film and apply a pattern on its surface on the reverse side. This will not be too difficult to do, because the indicated material is divided into squares. Now the sticker needs to be attached to the desired surface. This is a rather difficult and time-consuming stage. Also for this you need to stock up on mounting film. The drawing is superimposed on a dry, clean and even surface, glued on top with a mounting film, smoothed with a squeegee. After that, the film is carefully removed. If any part has peeled off, it must be put in place and again stroked well with a squeegee. Everything, the product is ready and already in place!