How to connect wired internet to a laptop. Connecting a computer to the Internet via a local network

Over the past 10 years, the Internet has rapidly entered our lives and into every home where there is a computer.
Now, not a single user working at a computer can imagine it without an Internet connection. After all, you can find almost everything on the Internet. Watch movies, sports broadcasts, listen to music, play online games. Find the information you need on any topic and download it.

Order tickets for a train, plane, concert, sporting event, pay for communication services, utility bills, buy an item you like in an online store.
In a word, the Internet is a very good and useful thing. That's why he's so popular.

To connect a computer to the Internet, you must have:

- installed network card and driver for it.
- Adsl Modem, router, hotspot, etc.
- Ethernet cable
- Cable for connection to RJ-45 telephone line.
- splitter.

And most importantly, the Internet access service must be provided by a provider.

Connect all cables to the computer and modem in accordance with the instructions.

Let's start setting up a network card andinternet connection on windows 7. To do this, follow these steps step by step. Step 1 . Click Start and go to Control Panel. Click the link.

Step 2 . Next click on.

Step 3 In the left menu of the window, click.

Step 4 . Right click on the iconLAN connectionand from the menu that appears select Properties left mouse button.

Step 5 . In the window that appears, left-click on the itemInternet protocol version TCP/IPv4and click on the button Properties .

Step 6 Select an item Use the following IP address, and fill in the fields as shown in the picture. Addresses forPreferredand Alternative DNS servers you must take from the contract for the provision of Internet services. After that press the button OK.

The network card setup is complete. Next, we proceed to create a new connection.

Complete Step 1 and Step 2 again.

Step 3 In the block Changing network settingsclick on the link.

Step 4 In a new window select connection optionInternet connections. This is a wireless, high-speed or telephone connection to the Internet. Click to continue Further .

Step 5 In the window Internet connection select High speed (with PPPoe). Connection via DSL or cable, requiring a username and password.

Step 6 . In the next window, you need to enterinformation received from the Internet service provider:

Username.
- Password.
- Connection name.

All this data should have been given to you at the conclusion of the contract.

Check the boxRemember this password.

You can allow other users to use this connectionby ticking the appropriate box.

After entering all the data correctly, click the button To plug .

Step 7 . The connection should be established after verifying the username and password. After that, a window will appear in which the system will notify you thatinternet connection ready to use. To exit, press the button Close .

In order to connect to the internet, in the window on the right side of the window, click on the link. Then double click on the iconHigh speed connection.

In order not to constantly go to the control panel to connect to the Internet, you can create a shortcut on the desktop. To do this, right-click on the connection icon and from the context menu select Create label.

Read how to connect your computer to the Internet through all possible methods and connections for: router, modem, phone, USB, Wi-Fi. Very simple!

Today, all computer users experience inconvenience if the device does not have access to the Internet. Connecting to the global network allows you to perform any task of finding the right information, communicate with people from any corner of the earth and work with a huge number of sites.

Consider how to connect the Internet to a computer through a router or an Ethernet cable, as well as all the advantages and disadvantages of each method. Before performing any of the methods, make sure that you have a twisted-pair cable or fiber optic cable in your home. It allows you to connect to the ISP's network and access the global network. Only after that you need to choose a connection method.

How to bring the Internet into the house?

• First you need to choose a provider. Find out which companies in your city provide Internet services. Check out the available rates and reviews from other consumers;
• After choosing a provider, contact the company's support service and order an Internet connection service. Within a few days, employees of the organization will come to your home and install a twisted pair cable;
• After connecting the right cable, you can choose how to connect your computer to the network - using a wireless router or connecting the cable directly to the device.

How to connect a computer to the Internet through a Wi-Fi router

A router (or router) is a special device whose purpose is to forward data packets between the global network and devices connected to the router. Externally, any is a small unit with one or more antennas.

On the back panel of the router there are ports for connecting a patch cord (Internet cable) and LAN ports, which are used to wire the device to the network. Wi-Fi coverage and signal strength depend on the number of antennas.

A standard router has one or two antennas and a coverage radius of up to 150-200 meters. This indicator is quite enough for use in an apartment or house. If there is a need to create a wireless Internet network for an office and other large premises, routers with 4 antennas or special extenders are used - small gadgets that expand the existing coverage area of ​​​​the router.

There are several ways to connect to the Internet using a wireless router:

• Creation of a single access point. As a result, you can connect to the network any home gadget that supports Wi-Fi technology (laptops, computers, smartphones, tablets, Smart TV and others);
• Wired connection to a router to create a home network. You can not only create an access point, but also connect your computer to the router at any time using a patch cord and LAN ports. Before connecting two or more computers to the Internet, make sure that the main Ethernet network cable is also connected to the router. Otherwise, you will simply create a home network without Internet access.

Connecting a Windows computer to an already configured Wi-Fi network

The easiest way to access the global network is to use an already enabled and configured router. If you are in an establishment with Wi-Fi access, you can easily connect your laptop or any other gadget to the Internet.

• It is necessary to open the Wi-Fi network management window on the device and view the list of available connections;
• Each access point has its own name. Find the name you want and click on it. Then enter (if the network is open, you will not need to enter a password).
• The device will automatically connect to the hotspot and you can start using the Internet.

Note that at the stage of establishing a wireless connection with the router, your device shows the signal quality. If the network does not catch well, this may cause a sudden disconnection of the Internet or the inability to connect even with the correct password. We advise you to get closer to the router and try to set up the connection again.

It is important to remember about the security of personal data when using public open Wi-Fi networks. Through these connections, an attacker can easily gain access to personal data stored on your device. This can be payment card data, passwords, access to e-mail, cloud services.

When connecting to public Wi-Fi in crowded places, we do not recommend paying for purchases on the Internet and accessing Internet banking sites. This can lead to the theft of confidential information. Using open networks for normal surfing does not harm you or your computer.

Setting up a new router

If you have purchased a new router and want to set it up for further Internet connection, you can do it in 10 minutes. All routers are configured according to a single scheme, so there will be no difficulties. The only thing to consider is the presence of an Internet cable in your home. Make sure to connect this service with the provider.

Follow the instructions to create a Wi-Fi hotspot yourself:

• Unpack your router. In its configuration you will find the device itself, a patch cord for connecting other devices and a power cable. Also, most units come with first setup disks, and some models' antennas may be removable;

• Connect the antennas to the router if they are disconnected. Then expand the router. There are two types of connectors on the rear panel - WAN (for connecting an Internet cable) and LAN (for creating switching devices within the same network). Also, some models may have USB ports that can be used to connect flash drives;

• Connect to the WAN port the Internet wire that the provider brought into the room (also, this port can simply be denoted by the word Internet and be colored yellow);
• Then connect the power cable, the connector for which has a round shape and is also located on the back of the router;
• Plug the device into a power outlet and press the power button on the same back panel. One or more LED indicators on the router case should start working.

Ready. You connected the router to the Internet and activated its operation. Now you need to perform the basic configuration of the router so that other computers and mobile gadgets can connect to it.

To do this, follow these steps:

• Turn on your computer and activate the Wi-Fi option. In Windows, just click on the network icon in the tray and activate the service;

• The turned on router will be displayed as an active Wi-Fi network. Typically, the network name is the same as the model name of the device. When you first connect, the network will be open, that is, you will not need to enter a password;
• After connecting the router to the computer via a wireless network, it is necessary to carry out the basic configuration of the router - set a password, network name, provider data and other options. To do this, go to the settings. This can be done using the disk that came with the package or using the web settings;
• If you have a disc, insert it into your computer's drive and follow any instructions that appear in the program. As a rule, you will need to connect to the access point and immediately set the password, security level and network name;
• To configure using the web interface, make sure that the connection is established and the router is connected to the power supply. Then open any browser and enter the address 192.168.0.0 or 192.168.0.1 in the address bar. A window for entering the administrator login and password should appear. The default is admin and admin. Also, the login data is indicated on the bottom cover of the router itself.

• In the window that opens, go to the quick settings tab and follow all the instructions - set a password, encryption type, connection name and provider details. If you do not know how to enter the address of the provider or the company you need is not listed, contact your Internet service provider to obtain this data.

Close the web interface of the router. Now you can connect any computer and gadget to the wireless network. Use the password you set earlier to be able to access the Internet. As for the router menu, depending on the model and firmware of the router, it may have a different look or be in English. All instructions for using the menu can be found in the instructions for the router or on the website of the gadget manufacturer.

How to Connect Your Computer to the Internet Using an Ethernet Cable

Consider how to connect the Internet to a computer via cable. If you already have a router with an active WAN connection, just take a patch cord and connect it to the LAN port on the router, and on the computer to the Ethernet port. The final structure looks like this:

Also, you can connect an Ethernet provider directly to your computer. This is done if there is no need to connect other gadgets to the network or when the computer does not support WiFi technology. Of the advantages of direct connection of the Internet cable to the computer, the faster operation of the Internet is directly distinguished.

How to connect a computer to the Internet using a USB cable

There are times when the fastest and most convenient ways to connect to the Internet are not available. Then a smartphone or a USB modem with a SIM card comes to the rescue. Connecting the Internet to a computer in this case is very simple!

Internet connection instructions for:

1. You must have a cable with which you charge your smartphone. One end of it, as always, is included in the Smartphone, and the other instead of charging into the USB port on the computer.
2. In the smartphone settings go: Additional functions - USB modem. Check the box "enable"
3. Within a few seconds, your WIndows will detect the new device and show you that a wired connection has been established.

Important! In order to use the Internet from your phone on a computer or laptop, you must have a tariff plan that supports Internet access. Keep an eye on your phone traffic!

When connecting a USB modem with a SIM card to a computer or laptop, follow the instructions given to you when concluding a contract for the provision of the Internet with a mobile operator. As a rule, there you just need to insert the modem into the USB port of the computer and wait for the application and drivers to install. Everything happens automatically.

How to Connect Your Computer to the Internet Using Bluetooth

If you forgot to bring a USB cable for your phone with you, but you really want to connect your laptop to the Internet, it doesn’t matter either. You can connect the Internet to your computer from your phone via Bluetooth. For this, several conditions must be met:

1. Your laptop must support a Bluetooth connection,
2. The smartphone should be no further than 1-3 meters from the laptop (the closer the better),
3. Your phone must have a data plan

Instructions for connecting the Internet via Bluetooth

1. First you need to establish a connection (pairing) between your computer and smartphone. To do this, in the computer tray (where the clock is in the Windows panel), click on the Bluetooth icon.
2. Next, click Options. And there select "Allow other devices to discover this computer". Save the new settings by clicking on the “Apply” button.
3. On your phone, go to Settings - Bluetooth - turn on the device.
4. Next, in the phone, go to Settings - Additional functions - Bluetooth modem. We turn it on.
5. Now on the computer, again click in the tray on the Bluetooth icon. Only now with the right mouse button! Select "Add device" from the pop-up menu.
6. If you have completed step 3 on your smartphone before, the computer will detect your phone. Click on its name and select the "Next" button.
7. A window with a PIN code will appear. The numbers must match on both the smartphone and the computer. If everything is OK, click on the “Yes” button. The computer will connect the smartphone, spend some time on the automatic installation of drivers.
8. You will have to click on the Blueooth icon on your computer again and select “Show Devices” there. Select the connected phone and right-click on it.
9. There will appear a window with a menu in which you need to select "Connect via". Windows will automatically connect. All! Now you can use the Internet at a not very high speed. Of course, you don’t watch films, but climbing the news is easy.

Outcome

After reviewing all the advantages and disadvantages, choose the type of connection to the global network that suits you. Before connecting a Windows computer to the Internet, make sure that the provider has activated the service for your subscriber number. Otherwise. Even after successfully creating a home network, the Internet may not work.

What method do you use to connect to the Internet? Below in the comments you can ask a question of interest that arose at the connection stage.

On a computer, after each reinstallation of OS Windows 7, you have to reinstall all programs, drivers and connect peripherals. But in the age of unlimited Internet, a person cannot imagine his existence without it. Therefore, the problem of connecting the global network after reinstalling the operating system always remains relevant.

Internet connection through routers

Owners of routers (routers) are more fortunate, since all settings are stored directly on a separate device, so reinstallation is not scary, and you just need to make sure that the network is configured correctly between the PC and the router. On Windows 7, this can be checked in the Network and Sharing Center ( Start - Control Panel - Network and Internet - Network and Sharing Center). Next, in the left menu, click on the link "Change adapter settings"

and check that the “LAN connection” item is active for the main network adapter:

You can check the name of the main network card in the device manager. The easiest way to find it is to hold down the key combination WIN + Pause (the combination is supported in all versions of the OS, including Windows 8.1).

and in the device tree you need to find the sub-item "Network adapters". Here you will see a list of all network cards (including virtual ones) installed in the computer.

Another question is when there is not a single network card here, but there are unknown devices - install drivers for your network equipment.

If this does not help, check that you are installing the appropriate software. In the worst case, the network card is not working and needs to be replaced.

When a network connection with the router is established, the Internet connection will be activated automatically.

Direct Internet connection using Windows 7 as an example

If you don’t look at the fact that now most providers provide Internet services without using a login and password (they use MAC address binding and you just need to insert the cable into the PC), let’s take a closer look at how to set up and connect a computer to the Internet using a login and password (PPPoE protocol).

First you need to check how the network card works (checking the network connection). Next, go to: "Start - Control Panel - Network and Sharing Center".

Here we select the item according to the picture:

In the next step, select "High-speed (with PPPoE)":

After selecting the type of connection, a window will appear with the fields that you need to fill in accordingly and click the "Connect" button:

After filling in all the fields, the computer will attempt to connect using the data entered earlier:

If no mistakes were made at the setup stage, it will be possible to connect a computer with Windows 7 to the global network immediately. If, after all the steps, the Internet does not work, you need to delete the created connection and repeat the process again.

Another way to set up a direct connection on Windows 7

Some providers for load balancing between servers work using another parameter called "Service Name". It improves the stability of the connection, but adds to the hassle for ordinary users.

To configure the service name, you need to go to the properties of the previously created connection. The easiest way is to open the network status indicator, which is located in the system tray, with the left mouse button, find the created connection, open its context menu and go to properties.

Here, on the very first tab, you can see the line of the same name, where you need to enter the service name under which your Internet provider works:

Now, after reinstalling Windows 7, creating an Internet connection should not cause unnecessary problems.

Every modern person uses the privileges of the World Wide Web. At the same time, few people think about the principles of operation and connection. However, the ability to work or play online from your laptop may depend on this knowledge. After all, it is not always possible to call the setup wizard. We will help you figure out how to connect the Internet to a laptop on your own.

First you need to choose the most suitable way to connect your computer to the Internet. You can do this wirelessly or wired:

• using a cable;
• using a router
• using a Wi-Fi network.

The first method allows you to achieve the highest data transfer rate when connected. But its main disadvantage is that the portable computer will cease to be such. You will have to find a point closest to the connection point, or buy an ultra-long wire. The second option also has its drawbacks, since the cable will interfere with free movement around the room.

As a rule, for wired Internet, all settings are entered by the wizard. But when reinstalling the operating system, it may be necessary to re-introduce them. To do this, you need to perform the following actions:

• connect the cable to the PC;
• through the control panel, open the list of networks;
• you need to set up a new connection - the second option;
• enter the username and password provided by the provider.

Setting up a wireless connection: router and Wi-Fi

The easiest way to connect to the global network is to use Wi-Fi. This is possible if the room already has a configured router. In just a few minutes you will have a quality wireless connection. What is needed for this?

• Enable the wireless transmission module on your PC.
• Find the "Network Connections" tab found in the Control Panel folder.
• Turn on your wireless connection.
• You may need to enter an access password before connecting wireless internet to your laptop. You can connect to an open network without a password.

An equally important question is how to connect an Internet router to a laptop. Using our recommendations, everyone can cope with this task.

So turn off your router. Connect the cable directly to the laptop through the appropriate connector. Then find "Network and Sharing Center" in the Windows menu.

Select the LAN connection properties. You need the fourth version of the protocol. Is there an inscription with numbers? Copy them, it's a Static IP. Select the function to obtain IP automatically.

Next, in the built-in browser of the operating system, insert a sequence of numbers into the address bar (exactly in the format with dots and without spaces) 192.168.1.1 or 192.168.0.1. A menu will appear in which you need to enter “admin” in the login and password fields (look for the login password on the router itself, often on a sticker next to the mac address). Select dynamic IP and click "Next". Enter the hotspot name and password for Wi-Fi.

If your laptop still does not connect to the router, we recommend that you seek the advice of a specialist.

In any case, connecting a laptop to the Internet can be done in a few minutes. If you are having connection or internet speed issues, please contact Wifire. Our company is guaranteed to provide you with a high quality connection.

Frequently asked Questions

How to connect to the Internet through a laptop if Wi-Fi is broken on it?

In this case, you need to use a network cable and standard provider settings.

Will the connection speed on a laptop decrease when transferring data through a router?

Yes. If you want a fast connection, use a network cable.

Tariffs and services of Net By Net Holding LLC may be changed by the operator. Full up-to-date information about tariffs and services - in the "tariffs" section or by phone indicated on the site.

According to statistics, almost every user of modern computer systems at least once in their life faced the question of how to set up the Internet on a computer. It is not surprising, because recently the World Wide Web has gained insane popularity and has become available to absolutely everyone who has a computer, laptop or mobile gadget. Despite the complete automation of the process, not everyone knows how to set up an Internet connection.

Networking and Internet Connectivity Basics

The first rule: you need to clearly understand that in some cases you will have to use not automatic connection, but manual mode. In addition, two main conditions must be met here: the presence of a provider and appropriate equipment (network cards, ADSL modems, routers, routers, etc.)

But now we will talk about how to set up the Internet on a computer with a wired connection, since private virtual networks (VPN) in most cases are automatically detected by computers, laptops or mobile devices and require a maximum login and password to enter (provided, of course, that the router is already configured).

What is the TCP/IP protocol?

In Windows operating systems, connection to networks and the Internet is carried out using the TCP / IP protocol system, which is responsible for the correct transmission and reception of data. In fact, this is not even one, but several protocols. This group includes connections via UDP, FTP, SMTP, ICMP, TELNET, etc.

If we talk about how to set up the Internet on a computer, without going into technical details, it can be noted that the set of TCP / IP protocols is associated with a kind of bridge between computers located on a network with a single system of authentication and transmission of byte data streams separated at the beginning and combined at the end of the route. At the same time, it does not matter what operating systems are installed on the terminals connected to each other. This is what makes the TCP / IP system not only the most popular tool for connecting to networks and the Internet, but simply a universal tool.

Network cards and their properties

One of the main conditions is the presence of a network card in the computer terminal, into which the cable is included. Today, fiber optic lines are the most widely used.

To understand how to set up the Internet on Windows, you first need to determine the characteristics of the network card itself. The connection speed will depend on its main characteristics and parameters. The simplest example: a leased line supports a connection with a data transfer rate of about 100 Mbps, but the card does not. In this case, you will not have to rely on the speed declared from the provider. It is clear that a network card cannot transmit and receive more than its face value.

To view all its characteristics, you need to enter the "Control Panel" and select the "Device Manager" section, find the network card installed in the system and right-click the "Properties" option. On the tab field "General" and all indicators will be visible.

Internet Connection Methods

The most common methods of connecting to the Internet are leased lines, broadband DSL lines, LAN connections, satellite connections, TV network channels, and dial-up access. The latter, however, has already outlived its own.

In any case, the question of how to set up an Internet connection, with each connection option, has two standard solutions.

Automatic internet connection

Provided that an account has already been provided by the provider, you need to connect a network cable to the network card connector, designated LAN (if necessary, to the modem or router connector).

In the "Control Panel" you need to select the item "Network Connections" (for Windows 7 "Network and Sharing Center"), use the command "Create a new connection" ("Set up a new connection or network" for Windows 7), then go to the "Connecting to the Internet" section. Then it remains only to follow the instructions of the "Master". At the end of the process (after restarting the computer terminal), you can work.

Connecting to wired Internet in manual mode

As for how to set up the Internet on a computer in manual mode, you first need to perform the above steps, and then use the data provided by the provider.

In the case of automatic configuration, you do not have to enter data manually. Typically, on the TCP/IP Properties tab, the IP Address, Subnet Mask, Default Gateway, Preferred and Alternate DNS Server settings will be greyed out because there are two commands in the settings: "Obtain an IP address automatically" and "Obtain a DNS address". server automatically. This, of course, saves the user from writing addresses manually. If you dig deeper, then on the "Advanced" tab you will not have to specify the addresses of WINS servers, proxy servers (if any), and even set up an alternative configuration.

However, it often happens that obtaining automatic addresses is either impossible or does not work. This is where the main problems begin.

As a rule, all values ​​specified in the protocol properties tab are unified. So, for example, the IP address is assigned the value 192.168.0.1, the subnet mask is 255.255.255.0, the default gateway and DNS server is 192.168.1.1. In some cases, when creating a connection, the address parameters of the gateway and DNS server match the current IP address (192.168.0.1). By the way, in most cases it is not necessary to prescribe WINS addresses or proxy servers.

How to set up the Internet? Windows XP

To configure an Internet connection in Windows XP, you need to use the standard method: in the Control Panel, use the Network Connections command and the Properties tab, find the line "TCP / IP protocol settings", and then give preference to one of the proposed options for automatically obtaining addresses or specifying them manually, after going to the "Properties" tab (for PCP / IP).

How to set up the Internet? Windows 7

Creating an Internet connection in Windows 7 has no fundamental differences. The only difference is that some components have a different name, and TCP/IPv4 (fourth version) is used as the protocol.

To configure the connection, use the “Control Panel”, click on the line (or icon) “Network and Sharing Center”, and then apply the option “Set up a new connection or network”. Then it remains only to select the desired type of connection. After the connection is activated, again it will be possible to view all the data, and if necessary, change them using the tabs "Network connection / Properties / Network / Protocol version 4 (PCP / IPv4)", where all addresses will be shown. If these are provided automatically by the provider, the fields to fill will be inactive.

Other ways to connect to the Internet

In principle, there is another option, how to set up a computer via the Internet. True, for an ordinary user, this procedure may seem rather complicated, especially since in this case you need to have a remote connection to a computer terminal on which it is supposed to configure access to the network or the World Wide Web.

To do this, you can use the built-in standard tools of all versions of Windows operating systems located in the Start menu, Programs section. There is a folder "Standard" in which the command "Remote Desktop Connection" (for Windows 7) is located. In other versions of operating systems, the names may change. To create remote access, you can use software packages and applications from other manufacturers and developers, but, as practice shows, the easiest way to create a connection manually is on a local computer with direct access.