What can be done from old canisters. What are the crafts from plastic bottles and canisters for a personal plot or cottage (photo)? Crafts from canisters: we make a decorative night light

In order to decorate the garden, it is not necessary to spend a lot of money on the purchase of decorations, it is enough to use improvised means. An excellent solution would be old canisters, crafts from which will decorate any area. On the features of using canisters for the manufacture of crafts, we will consider further.

Crafts from plastic cans: an express method for making a bucket

Plastic buckets are very necessary and useful things not only in the garden, but also in the whole house. If the bucket was needed urgently at home, and there is currently no opportunity to purchase it, but any plastic canister is suitable for its manufacture.

For these purposes, you will need the canister itself, with a capacity of at least five liters, a knife and a handle from old buckets. Using a pencil, make a markup according to which the canister will be cut off under the bucket. Next, use a knife to cut off the unnecessary part of the canister. Equip holes on the canister for installing the handle, install it in the desired position.

To adjust the volume and capacity of the bucket, just cut the canister. If there is a need for a large number of buckets, then using old canisters, you can build tanks with different capacities.

With the help of such a bucket, you can water the garden or garden, measure the required amount of bulk materials or liquids, in the process of construction work on the site. In addition, it will not be a pity to throw away such a bucket after placing compounds in it to fight various insects or animals.

Crafts from old canisters: a great solution for children

If there are a large number of canisters, preferably one volume, they can be used to make a decorative flowerpot. An easier solution is to take one canister, cut off the unwanted top, fill it with soil and plant flowers. Next, the canister should be painted and decorated using shells, stones, etc.

A more complex solution is to make a train out of canisters. In this case, you can build the first flowerpot from the largest canister and decorate it like a wagon. Subsequent flowerpots should be the same size. In general, you will need to have:

• approximately 5-8 canisters;
• clerical knife;
• paints, for work outside the premises;
• soil or plant nutrient formulations.

First, remove the side of each of the canisters. You need to do this with a clerical knife. Next, the canisters are installed in such a way that they have the shape of a train. To create a locomotive, place one canister on top of the second, and the lids will become great wheels.

To make the train more realistic, paint it in fun colors, blue, yellow, orange, pink. Wait for the containers to dry, and then set the soil in them and plant the plants.

In the autumn season, before the onset of winter, flowerpots are covered with polyethylene film or other waterproofing material. Since in the process of accumulation of moisture in flowerpots, during severe frost, they can be deformed or damaged.

Crafts from canisters: we make a decorative night light

If a lamp has broken in your garden or it doesn’t exist at all, then it’s quite possible to build this device from an old, preferably white, canister. In addition, you will need to have:

• sharp knife;
• the cartridge in which the light bulb will be installed;
• a wire with a plug and a switch;
• glue, preferably silicone-based;
• decorative piece of fabric;
• paper napkins for decoupage.

Cut off the unnecessary section of the canister and install wires with a light bulb into it. Next, decorate the lamp. To do this, it must be wrapped in a piece of fabric, for fixing which an adhesive base is used.

The second option for decorating the lamp involves the use of decoupage napkins. With their help, it is possible to achieve an original and incredibly beautiful texture of the lamp. Initially, the canister is lubricated with glue and these napkins are glued onto it.

After the glue dries, a hole is made in the canister to install a light bulb and wire. This lamp harmonizes perfectly with a wooden stand, or it is possible to make a special long leg and use the canister as a floor lamp.

Using this method, you can also make a chandelier that is installed on the terrace. Plastic is a great option for outdoor use as it is resistant to moisture, heat, mildew, easy to clean and easy to use. However, chandeliers from canisters with decoupage or fabric should be protected from moisture and used only in warm and dry weather.

Crafts from plastic cans: building a closet

Another option to use old plastic canisters is to build a whole cabinet with their help, in which you can store small inventory and various accessories. In addition, shoes and even clothes fit perfectly in such a closet.

In the process of work, a minimum of 15 canisters, a knife and clamps will be required. In order for the evenness and stability of the cabinet to remain at the proper level, try to keep the canisters the same in volume. Cut off the upper part of each of the canisters, however, the side on which the canister begins to narrow should remain. Thus, things and tools will be securely held inside.

The first row of canisters is fixed to each other, and in this case cells are obtained, inside which various objects can be placed. You yourself set the shape of the cabinet, it can be rectangular, square, pyramid-shaped. Without fail, the cabinet must be connected to the wall, as its stability does not allow it to be installed separately.

In the same way, shelves are built from canisters for storing books, shoes, things, hats, etc. Having painted the canisters in bright colors, you can get an interesting design solution for decorating the premises both inside and outside.

Crafts from canisters for the garden: making decorative masks

If, after making various garden decorations from cans, you still have cut sections of plastic cans, do not rush to throw them away, let alone burn them. They will be an excellent material for making masks that can be hung both in the garden and at the entrance to the house.

The hole from the neck of the canister can serve as a mouth, and if you cut a few more holes, they will be eyes, ears and even a nose. Using your imagination, you can very quickly turn these segments of canisters into interesting decorations.

• segments from canisters, preferably those on which the neck is located;
• glue and ropes;
• various fabrics, ribbons and beads, for decoration;
• buttons and wire of very thin diameter;
• scissors and an awl.

With the help of ropes and wire, hair is fixed on the mask. To make holes for the hair, use a regular awl. The nature of the hairstyle depends on the overall style in the design of the exterior and, of course, your individual preferences. Eyes are most often made by gluing buttons onto the mask. For these purposes, you need a wire. To draw eyes, use paint or a marker. To make the mask look more attractive, decorate it with a necklace of shells or large beads.

To make the mask look even more impressive, lead a wire to it and install small, possibly multi-colored paws. These lanterns are suitable for any holiday that takes place in the garden.

DIY canister crafts: simple ideas

From plastic canisters you can build boxes for garden tools. To do this, cut off the neck of the canister and attach a handle to it. This device can also be used in the garage to store keys or fasteners.

Cutting a plastic canister in half, you get a container in the form of a pallet, into which soil is poured and various kinds of plants are planted. At the same time, these mini flowerpots are perfectly transported from place to place. We recommend painting them, for example, in the form of birch or wood.

In addition, you can involve children in the joint production of feeders for the garden from plastic canisters. Draw rectangular fragments on the canister, approximately 4-5 cm from its bottom. Next, the container should be cut according to the previously drawn sketch, using a knife. The lower part of the plastic is bent and serves as a landing area on which the birds are located. I put food inside the feeder. If desired, decorate it in bright colors.

Waste canisters can also be an excellent material for the construction of various garden figures. It is enough to purchase paints used for outdoor work and turn on your imagination. From small cans it is quite possible to get garden gnomes, various cartoon characters, a donkey, a piglet, a cheburashka, a wolf.

In order for you to get a pig, you should install the canister with the handle to the top, on the bottom, elements in the form of hooves are fixed with bolts. For their manufacture, an old rubber tire or foam is suitable. As a patch, it is enough to use a lid from the same canister. However, the color of the body and patch should be different. Buttons are used as eyes, installed with a wire, which is threaded through holes made with an awl.

Next, you should install the ears, which, like the hooves, can be rubber or made of foam. In order to decorate a piglet, bristles are also made for him, using an old brush or a bottle or plastic cut into strips. The option of manufacturing several piglets or a whole family is possible.

In addition, to decorate the site, you can build a horse, the canister is also used as the body. In order to make a neck for a horse, use an old hose or board. A slightly smaller canister will serve as a head, on which hair, eyes are attached, a mouth and teeth are drawn. To make the horse's tail, willow branches or a plastic bottle cut with scissors are used.

A resting place for their old canisters

If there are a large number of canisters on the garden plot, and at the same time you don’t like garden crafts, then we recommend arranging a place to relax from them, namely a bed.

For these purposes, it will be necessary to have canisters of the same size, which were previously completely washed by their owners. To fix the canisters together, tape, electrical tape or special welding is used. All canisters are installed in a special portable net, so the bed is easily transported from one place to another. In order to avoid excessive rigidity from the bed, we recommend supplementing it with a mattress.

In addition, with the help of plastic canisters, it is possible to build a raft on which you can swim, having your own pond. Also, if there is imagination, playgrounds, benches, tables, arches, houses are built from plastic canisters.

By connecting the canisters to each other in a certain sequence, using liquid nails or special welding, it is possible to get a playhouse for children. At the same time, decorating each canister in its own color, you get an excellent and original solution for children. If you open the canister and level it, you can get a surface in the form of a rectangle. Their data parts manage to build sheet structures, while they are used as canopies, slides or roofs for the house.

With a combination of plastic jerry cans, waste bottles, pipes, junk and your imagination, the garden plot will become a real work of art. Also, a garden canister can be crafted into a garden tool such as a rake, a shovel, or a small broom.

Many homeowners create all sorts of plastic bottle crafts to decorate their place of residence. You can create real works of art by spending a minimum of money.

Not only decor items are made of plastic, but even furniture. All you need is a knife, an awl and a little imagination.

In this article, we will analyze in detail how to make crafts from plastic bottles with your own hands.

We decorate the site

What kind of home-made products you will not see on personal plots. There are flowers, animals, and trees. You can create beautiful sculptural compositions that will not only decorate the garden, but will also give a great mood.

Let's take a look at a couple of instructions for beginners that make it easy to create crafts from plastic bottles. It will be a palm tree and a pig.

bottle palm tree

To make a palm tree, you need to create a frame. Its length should be equal to the height of the tree.

Bottles of the same size are taken, the bottom is cut off from them and placed on top of each other. Then the leaves are cut out. They are attached to the top of the created structure. When everything is ready, the palm tree is painted green.

Funny pig from bottles

The piglet will look great anywhere in the garden. For its manufacture you will need:

• 5 l bottle;
• four bottle necks for making legs;
• one top of the bottle, which is cut in two to make the ears;
• tail wire;
• two beads for the eyes;
• glue;
• pink paint.

The parts are connected and fixed with glue. The finished product needs to be painted. You can use oil or spray paint. To prevent the pig from being blown away by the wind, you need to pour sand into it.

In addition to the decorative function, the design can serve as a flower bed. To do this, the top is cut off, filled with earth and flowers are planted.

Crafts from plastic bottles for the garden can serve as flower beds, borders or paths. To make a path, bottles are inserted into the ground with a neck.

Both whole and cut plastic are used. It is important to fill the bottles with earth so that they do not deform when they are walked on.

The use of bottles in the household

Bottles are used for more than just decoration. From them you can make a scoop, a washbasin or a trap for a pest.

Undoubtedly, everyone will need a container for storing any items. To make it, just cut off the neck.

The washbasin is also very easy to do with your own hands. The bottom of the bottle is cut off, and holes are made through which the rope is threaded. The structure is hung in the right place and water is poured. To wash, just unscrew the cork a little.

To make a trap, you need to cut the container in half. To catch insects, some kind of bait is placed at the bottom. For example, sugar syrup with yeast is suitable for this.

You will need hot water in which sugar and yeast will dissolve. The cooled liquid must be poured into the trap. Not only flies and wasps, but also mosquitoes will flock to this delicacy.

Note!

Even a child can make a scoop. First you need to outline its shape, and then cut it out.

Plastic can be used to make flower pots, greenhouses or containers for seedlings. Descriptions of such crafts from plastic bottles can be found on the Internet in large numbers, but in order to create something unique, you need to show your imagination.

It is fashionable to build an automatic watering tool from plastic containers. To do this, cut the bottle, make holes on the sides and put the hose into the neck. With the help of such a device, the plants will be perfectly moistened.

For plants that do not like surface watering, the following device is made. The bottom of the plastic container is not completely cut off. A trench is torn to the side of the plant, where stones are laid. The bottle is instilled upside down.

Then pour the right amount of water to carry out watering. You can place bottles upside down, but in this case you will need to make holes in the container.

Plastic containers are also used to heat plants. To do this, the bottles are filled with warm water and placed around the plant.

Note!

For inspiration, you can see various photos of crafts from plastic bottles. You do not need to make great efforts to make an original decoration or a useful little thing for your garden that will last for many years.

Photo of crafts from plastic bottles

Note!

Many owners of suburban areas and cottages are faced with the fact that by the end of the season they have accumulated a lot of unnecessary canisters and plastic bottles.

Such things should not be thrown away: from them you can create a wide variety of crafts for the garden, cottage or garage, which can perform both a practical and decorative function.

Most of these items can be built with minimal effort in 10-20 minutes, and they can make the area more interesting and original.

Depending on the characteristics, such containers classified according to the following parameters:

1. Volume - from 1-2 to 50-80 liters.
2. The form. Canisters can be flat and rounded, oval, rectangular or square in section, have a handle with a lid.
3. Colour. Plastic products are most often white or translucent, there are also cans of green, blue, red and other shades.

For creating decorative items and practical devices suitable containers for food, water, fuels and lubricants, fertilizers, other liquid products.

Before you start making crafts, it is advisable to inspect the canister for damage, thoroughly clean and degrease it.

How to make a washbasin?

A 5 liter plastic container is ideal for creating country or camping device for washing.

The filler hole of the canister will be used to fill with water, and in the bottom you need to make a hole and insert a tap or valve.

To do this, you need to use a pair of seals in the form of rubber gaskets and a fixing nut so that the water does not leak out, and the tap is firmly fixed.

Washbasin or washbasin can be hung on a crossbar, hook, attach to a vertical surface with a belt or even tape. A funnel can be inserted into the filler hole for convenience: this way, when filling the canister, water will not spill onto the ground.

If you put a simple faucet, you can adjust the pressure by turning the handle.

Master class on creating a swan

Sculptures of birds to decorate a suburban area are often made of plastic. We present to your attention a small master class on making a swan from an old canister.

For this purpose 5 liter containers required. It is necessary to cut the product so that the body, tail and long neck are immediately cut.

Then you need to prepare the wings from thick cardboard.

Neck worth cover with newspaper and tape, then do the same for the entire workpiece.

After you need apply a layer of plain napkins and coat the future sculpture with plaster mortar.

As they dry, the surfaces are sanded, painted and decorate with additional elements(for example, the eyes of a bird can be made from colored stones or glass).

Garden flower bed

Many owners equip flower beds in the garden or front garden, and plastic canisters can be used for two purposes:

1. Container for planting flowers. You will need to cut the product, turning it into two halves, and dig it into the ground, then pour the prepared soil with fertilizers inside and sow flowers. The canisters themselves can be optionally decorated with colored paper, paint, and in other ways. In addition, the mini-flower beds themselves can be lifted off the ground, as shown in the photo below: this is especially true if the soil is initially not suitable for specific varieties or it is too wet.
2. fencing for the finished flower bed. The option is great for large flower plantings: canisters are dug around the perimeter, blocking the plants. This design is rather decorative, for her it is better to use colored containers of the same shade or alternate 2-3, then the fence will look aesthetically pleasing.

plastic scoop

If the canister is small (1.5-2 liters), a scoop can be made from it for cleaning or garden work.

You will need to mark the future product on the surface and cut it out; the handle matches the container handle. The bow can be made both triangular and square.

In the first case, it is convenient to use a scoop for digging up plants with a small root system from soft soil, and in the second case, for collecting garbage.

Sprayer

A large capacity (10-30 liters) can be adapted for spraying plants with chemicals that protect plantings from pests.

canister equipped with a manual or electric pump for ease of spraying. For carrying, you can adapt the handle or straps to carry it on your back.

The hose, spray nozzles, and rod can be purchased at any hardware or plumbing store.

A rubber nipple can be used to install the valve.

Such a sprayer is suitable for processing small gardens and front gardens, for larger areas an extension may be required.

Most often a device made of a plastic canister used for spraying chemicals against pest beetles, cabbage, as well as mold and fungus. You can also use products prepared according to folk recipes, from soap solution to urea.

Tool box in the garage

To create such a device, you can use cans of different sizes, the choice depends on how many things you plan to put inside.

The most commonly used containers are 10-20 liters from under water, food, chemical, combustible products. The shape should be rectangular, in the middle at the top is the handle.

Manufacturing instructions:

• make a vertical cut on the side of the neck and handle, leaving the wall intact from the narrow part of the canister;
• bend the resulting "door", opening the container. Inside you can place sections of plastic cups or boxes, any other fasteners. In such a box, you can store small items (nails, screws, paper clips, electrical tape, etc.) or tools directly (hammer, pliers, pliers, etc.).

In order to make the tool box stronger and more airtight, the sides can be reinforced with metal plates, for this, the walls will need to be drilled and fixed with bolts and nuts.

Watering can

For such a product, it is optimal to take a canister from under the detergent or other products that have slightly flattened shape and comfortable handle.

It is necessary to thoroughly wash the internal parts from liquid residues, then drill thin holes in the lid. The optimal size is 1-1.5 mm. Just above the handle, you need to make a larger hole for air supply: if this is not done, it will be more difficult to water the beds due to the pressure drop.

If necessary, you can equip the watering can with a plastic tube, which is purchased in household goods or plumbing stores: it will increase the spray range.

The water is poured through the cork, for this convenient to use a funnel or hose so that the liquid does not spill.

You can also cut a wider lid, then the use of a funnel when filling with a regular bucket is not necessary. However, in this case, care should be taken to ensure that when watering the plants, water from the watering can does not flow to the ground through the lid.

We create a planter

Hanging or stationary flower pots can also be made from plastic containers.

canister can cut in half horizontally, then process the edge of the medium so that it is not sharp: grinding will be required. After that, holes are made 0.5-1 cm from the edge, into which a cord or rope of small thickness is inserted, fastened with an allowance of 20-40 cm (the size depends on which plant the pots will be used for).

Then a single suspension is formed, it can be made in the form of a loop. The planter can be hung on hooks, wire, nails.

If the products are to be placed on a stand, making holes for fasteners is optional.

In any case, small cuts are needed in the bottom: they allow you to create a competent soil microclimate and remove excess moisture.

The surface of finished planters can be braided into knitted covers, decorated with appliqué or painted - a sample of such crafts is shown in the photo below.

fishing box

For this purpose, 20 liter oil cans can be used; side pockets, if necessary, are made from less capacious containers.

The canister is cut off, leaving the height at which the fisherman will sit comfortably for a long time, reinforce the cut with an aluminum strip with rivet fastening.

Inside you need to place a partition made of thick plastic: it not only divides the object into compartments, but also serves as an auxiliary stiffener and prevents the lid from deforming.

The lid is cut out of a thick plywood sheet and attached to the hinges. The top part is usually Lined with soft material for comfort.

A strap is attached to the sides of the canister so that the fishing box can be carried on the shoulder. The inner tool compartment can be divided into smaller segments (for rigging, rods, donks, circles, etc.).

Drinker for chickens

A device for providing poultry with fresh water can also be made from a 20-30 liter canister.

Would need prepare a wide pallet impervious to moisture. Make cuts in the bottom, then put the canister in the pan, leaving a gap between it and the bottom of 1-2 cm (for this, you can make coasters along the edge under the container).

The structure should be fixed so that the water container does not turn over from an accidental push.

After filling the liquid will flow evenly into the pallet where the chickens can drink from.

Such a drinker for chickens is good not only for its simplicity, but also for the absence of the need to manually adjust the water flow.

Flowerpots

It is very simple to make such products: just cut off the upper part and make holes in the bottom to remove excess moisture. Canisters are placed on stands, soil is poured inside and seeds or seedlings of flowers are planted.

Such flowerpots can be decorated or processed with moisture-resistant paint, decorated with appliqué.

Most often they are placed on terraces and in gazebos, turning the place of rest into a piece of paradise filled with greenery.

A raft of empty containers

This design is suitable for crossing the river, fishing, mobile bridges on the pond.

The frame of the raft is made from a 3 mm board, knocking it down with nails or screws.

A raft is made from empty canisters with a volume of 40-50 liters, they are attached to the frame with packing tape or a special darkened film.

The second option is interesting in that it protects plastic surfaces from fading under the rays of the sun. The frame must first be coated with antifungal agents and varnish to protect it from decay upon contact with water.

Finished construction can be equipped with the following equipment:

• mooring ladder;
• feeders for luring fish;
• seats, loungers;
• shelter from the sun;
• anchor.

Shower for giving

The procedure for creating such a structure includes the following steps:

1. Creating a handle. To do this, you can use a simple rope, passing it through the handle of the container and tying it around a tree or other structure where the shower will be attached.
2. Installing the nozzle. A lot of small holes should be made in the lid, blow through them, then insert it into the container faucet. The joint should be sealed so that moisture does not leak.
3. Building a stopcock regulating water pressure. Such a product can be found in the plumbing department. Rubber seals are required for installation.
4. Cover arrangement where the water will flow. It is better to make it closed so that dirt, foliage and insects do not get into the canister.
5. The sides are covered with black tape. so that the water inside warms up faster: black walls absorb ultraviolet better.

Useful video

Another idea for using a plastic canister is the toilet paper holder plus shelf in this video:

Conclusion

If you still have unnecessary plastic canisters and you cannot find a use for them, you should not throw them in the trash.

Recycling plastic with reuse in industry is the best option, allowing rational use of resources without harm to the environment.

In addition, the containers themselves can be used both for decorative and practical purposes - the choice depends only on the owner's imagination.

From the article, you learned what can be made from 10-50 liter canisters for a garden or garage, got acquainted with how to make a washbasin, a swan, a watering can, a raft, garage boxes and other useful tools.

In contact with

on 28.05.2017 148,373 Views

From plastic bottles you can make a lot of useful things for the garden and garden

Lovingly equipping the city dwelling, we are no less touching about our summer cottages. We try to ennoble them, create comfortable conditions for ourselves and add special notes of attractiveness to even rows of beds and berry bushes. Many summer residents have chosen the most affordable and flexible material for their creative experiments - ordinary plastic bottles. About what products can be made for the garden and cottages, we will talk further!

• house made of plastic bottles
• Country crafts from plastic bottles step by step: palm tree from plastic bottles
• Plastic crafts: some tips
• Master class from plastic bottles step by step

Wonderful hanging pots for cacti from plastic bottles

Resourcefulness in ways to place many plants in the garden

Plastic bottles in skillful hands will be a wonderful decoration for your landscape.

Beautiful plastic flower

Crafts from plastic bottles step by step: from a flower pot to a fabulous tower

The idea of ​​making useful tools and decorative items from plastic containers is not new. The first attempts led our grandparents to build low fences for paths. Assessing the plasticity and cheapness of the material, craftsmen from the people went further. And now summer cottages are decorated with full-fledged fences, funny figures and unusual devices made of plastic bottles.

A lovely ostrich from a pet container cannot fail to please your children!

Thanks to imagination and such excellent material as plastic bottles, we have almost limitless possibilities for creating crafts for every taste, any complexity and direction.

Pictures from caps of plastic bottles and other containers have grown into a whole art direction

Plastic bottles have long been in great demand among gardeners.

Gorgeous orange flowers from pet containers

Crafts and decorations for summer cottages and gardens from plastic bottles do not require the use of complex tools and specialized skills. The main thing is that there is time and desire, as well as enough material. Those who had both, convincingly proved the limitless possibilities of such needlework, and we have prepared a review of the best examples of crafts.

Do-it-yourself furniture, flowerpots and a vase from a plastic bottle

Comfortable and very stylish chair made of plastic bottles

A sheet of plywood, sixteen one and a half liter bottles, adhesive tape - and a comfortable and durable coffee table will appear on your site. Plywood can be replaced with plastic or hardboard, old countertops or plexiglass. From the same materials, slightly changing the design, you can make a garden bench. Some diligent and patient craftsmen manage to assemble full-fledged sofas and armchairs from bottles.

From plastic bottles, you can even make the basis for a full-fledged sofa, if you fasten them firmly and neatly.

Hanging flowerpot or base for planters

Do-it-yourself ottoman from plastic bottles

How to make a pouffe from a pet container

house made of plastic bottles

There are real builders among the summer residents who know that it is possible to build whatever your heart desires from plastic bottles. They collect gazebos, toilets, sheds and even from plastic bottles. The only difficulty of such structures is not in their assembly, but in collecting the required number of bottles.

House with a roof of 7,000 bottles

Plastic bottles are a good base material for building walls of a summer house, a greenhouse, a shower, a toilet or other partitions.

The walls of the greenhouse from containers on a wooden frame

The bottoms of plastic bottles will help to arrange garlands for the garden

Playground: flowers from plastic bottles and toys from plastic bottles

Crafts from plastic bottles will help decorate the playground

All kinds of crafts from plastic bottles are especially attractive for decorating a playground. Absolutely safe, they can become the basis for toys, and for fun decorations, and for creating plot compositions. Funny elephants, bees, hares and hedgehogs, bright flowers, cheerful lanterns will turn the countryside island of childhood into a fairy-tale kingdom.

A whole plot for a playground from caps of plastic bottles and canisters

From the caps of plastic bottles, together with children, you can make small crafts and large plot mosaics

plastic bottle doll

Examples of a variety of crafts that will help the gardener with placement, easy transportation and plant care

Piglets from large plastic bottles - stable stands for germinating seedlings or small plants

Craft for garden or lawn decor: pet container parrot

Crafts for the garden and useful little things

Multi-colored turtles will be a great decor element for your garden.

With what ease the "crazy" hands of summer residents turn used plastic containers into useful summer cottages, you can see by walking through the countryside. Here, on the trunk of a tree, a washstand was comfortably attached, and in the next courtyard, a gazebo was decorated with multi-colored geraniums with fragrant and ampelous ones. We have also prepared for you several descriptions of crafts from plastic bottles for the garden.

Do-it-yourself bird from plastic bottles

DIY painted garden owl lanterns

Birdhouse from a plastic bottle

It is very easy to make a birdhouse from a plastic bottle

Cut in half plastic bottles will become pretty flower pots, it is important to paint them carefully. It is also advisable to take opaque bottles for this.

The ever-tangled and stuck twine for tying seedlings will stop tormenting you if you hide the ball in a plastic bottle. Just cut the bottle in the middle, put a ball in the top, pass the end of the twine through the neck, connect the parts, secure the cut with tape - and a comfortable storage is ready.

Drip irrigation from plastic bottles

Your seedlings will not wither, even if you are away for a few days: install semi-automatic watering. Once again, plastic bottles come into play. We cut off the bottom of the bottle, about 2/3, drill 4-8 holes in the cork, close the neck, bury the bottle upside down, pour water - and the seedlings are provided with moisture during your absence. A similar garden made of plastic bottles (photo confirms this) will significantly save your time and money.

Automatic watering "Aquasolo" - these are conical nozzles for a threaded bottle that do not require time-consuming drilling of slots, digging into the ground, and so on

Anthurium with a convenient system of automatic watering "Aquasolo"

Maximum and space saving: plastic bottles suspended one above the other with a notched tube of water passing through them

• For the same seedlings, plastic bottles make excellent containers. After cutting the bottle in half and taking the bottom, pour the prepared substrate into it, plant the plants and place them on a bookcase made of wooden planks. This design is also suitable for decorating a house with flowers.

Beautiful hanging pots made of plastic bottles will not only decorate the interior, but also make it unique.

Great flowerpot from a shampoo bottle with your own hands

Arrangement in the country of compact placement of seedlings or small plants

Bird feeder from a plastic bottle

Some crafts from plastic bottles for the garden amaze with the ingenuity of the owners. By putting a bottle on a hose and making many holes in the bottom, you will get a wonderful diffuser for watering the garden. From a five-liter container, you can build an elegant lamp on the veranda, and a mineral water container is suitable as a bird feeder.

Plastic bird feeder

Simple and handy hose spreader for garden watering

• Plastic bottles will help you save trees from pests. Cut the bottle lengthwise into two halves, fill it with a mixture of insecticides that is attractive to pests and dig at the base of the trunk.
• From bottles you can make a magnificent decorative all-weather and all-season flower bed. Just paint the bottoms of the bottles in different colors and assemble a wonderful carpet out of them by sticking them with the open side into the ground. The carpet pattern can be pre-reproduced on paper.

Making flower beds with pet containers has become very popular

• One Brazilian engineer made calculations and built a solar collector from plastic bottles. The design can be placed in a summer cottage, connected to a storage tank, and you will always have a warm shower.

Solar collector made from plastic bottles

Automatic watering of seedlings and ornamental plants in your absence with the help of a plastic bottle dug near the roots with small holes drilled in the neck or lid

Cut plastic containers suspended one above the other are the fastest and most economical way out of a situation where you need to germinate a lot of seedlings in a limited space

Making an owl from a plastic bottle with your own hands

Bottles for sprouting and overwintering plants - an opportunity to save space and provide good irrigation and drainage

Products from plastic bottles: artistic masterpieces

Gorgeous dandelions from pet containers will never cease to delight you and your guests

The fantasy of folk craftsmen is so diverse that it leads to the appearance of outlandish animals, and characters from fairy tales and cartoons, and exotic plants, and original thematic compositions in summer cottages.

We paste over the bottom of a plastic bottle or cup with dry twigs and get an unusual candlestick, protected from wind blows

Rainbow decor of the garden, workshop, garage: a fountain of spirals cut from multi-colored plastic bottles

Plastic bottles are used not only to decorate the garden, but also to decorate the home.

Country crafts from plastic bottles:

If you have a small pond on your site, you can decorate it with a plastic palm tree. It's not at all difficult to make it. You will need:

• 10-15 brown plastic bottles (for a palm tree trunk);
• 5-6 green bottles (it is desirable that they are long);
• iron or willow rod;
• an awl or drill for making holes;
• sharp knife or scissors for cutting bottles.

A palm tree made of plastic bottles looks very beautiful

Now let's start making jewelry.

• Cut all brown bottles in half. We take the lower parts and make holes in the bottom of each of them with an awl, equal in size to the diameter of the rod.

Advice! You can take the tops of the bottles, then you do not have to make additional holes.

• We cut off the bottom of the green bottles by about 1 cm. We leave one of the blanks with a neck, cut it off for the rest to make a loop.
• Carefully cut the green bottles lengthwise into three equal parts to the very loop.

Making palm leaves

• We cut the edges of the brown parts with cloves to create an imitation of a rough palm tree trunk.
• We securely fix the rod in the soil. We calculate the length of the rod by laying out the brown details on the ground in one row, plus 2-3 cm on the leaves.

We put brown bottles on it.

Making a trunk for a palm tree

• We string our leaves on the free top of the rod, completing the work with a blank with a neck. We make a hole in the lid and screw it onto the last sheet, securely fixing the entire crown.

Combination of stem and leaves

Assembling a palm tree from plastic bottles

Using several rods of different lengths, you can create a real oasis. As you can see, it’s not so difficult to make crafts for a garden from plastic bottles with your own hands, the main thing is to find enough material and take one of the proposed ideas as a basis.

Step-by-step guide: make fabric pots on the basis of plastic bottles.

Hedgehog from a plastic bottle and a twine rope: we grow seedlings and small creeping plants

Crafts for giving from caps from plastic bottles

From plastic covers you can create real masterpieces

Don't throw away bottle caps. Decorative crafts from caps from plastic bottles for summer cottages and gardens can also fit beautifully into its landscape. They will serve as an excellent mosaic material for decorating fences and walls of a country house.

Bright compositions made of plastic covers will help make your landscape design more fun.

Master class video (from plastic bottles of standard capacity):

A walkway made of plastic covers is not only economical, but also very beautiful.

Large-scale red and blue mosaic of caps of different sizes

Having conjured a little with the pattern, painted and drilled holes in the sides of the covers, you can use them to assemble a curtain on the door. The perfect insect repellant!

The lids can be turned into a beautiful tabletop or a practical doormat. Use them for decorative interior decoration.

Gorgeous door curtains made from plastic covers

Carport that diffuses sunlight

Beautiful Hawaiian style lanterns

Before starting work, remove the labels from the bottles and wash the container thoroughly.

For the stability of vertical structures, fill the bottles with sand or small pebbles.

Dragonflies from corrugated plastic bottles

Ingenious device for collecting fruits from trees

Hanging pots from pet containers with the image of animals will perfectly fit into the interior of a children's room

Choose bottles of different softness for crafts. For example, for the body of a dog or elephant, take a strong base, and for the ears it is better to use softer plastic.

Master class from plastic bottles (step by step):

Here is what I found in the bowels of the Internet:

bag frame

You all know what a travel or sports bag is, and you probably noticed that when you carry it over your shoulder, it deforms and looks ugly. These shortcomings can be corrected with a plastic canister. It will serve as a kind of frame for the bag. For my sports and travel bag, a twenty-liter canister of engine oil fit me in size. First, I cut out its upper part with a knife, and then degreased it and wiped it with turpentine (you can also use white spirit, etc.) flammable liquids remain. Place the already cut canister in the middle of the bag and it is ready to use. There are still advantages from using a canister: if a jar breaks in your bag: with liquid, jam, alcohol, etc., then nothing will leak out of the bag and everything will remain inside the canister; and the walls of the canister themselves will save this jar from breaking. Naturally, if the bag is of a different size, then a canister of a different size is needed. This frame, if necessary, can be easily pulled out of the bag.
Storage tanks

As a storage container for small items, medicines, etc. In garages, outbuildings - for storing nuts, bolts, etc. I also use canisters as a tool storage box. Self-tapping screws, nails, bolts, nuts - which may be required during repairs, I put in this "box" in a plastic jar from under the fish fillet.

"Patches"

You can use scraps from canisters that you started using on my advice. I personally applied them as "patches". For example: if you have central heating, plumbing, sewage, then the pipes go through the walls. The size of the punched holes for pipes is often such that it is enough for small domestic animals to penetrate into places not intended for them and there to direct their natural needs. There are such inconspicuous places for the human eye, where it is not necessary to close holes with something capital and insanely stylish and expensive. And if these pipes are not new, they may need to be replaced. In this case, the patch can be removed by unscrewing a couple of self-tapping screws, and not hammering concrete in the sweat of your brow, and even in an inconvenient place.
For picking berries
In my area near the house, both sea buckthorn and hawthorn grow. Those who picked berries from them know how prickly they are and how inconvenient it is to pick them. Sometimes it's hard to move. I cut off part of the top of a 10-liter canister, fitted a short strap on the handle so that this device could be worn around the neck with it. You do not need to lower your hands with plucked berries down, everything is at your fingertips.

Does anyone else have any thoughts on reusing canisters?