What can be made from PVC pipes - some of the most interesting and useful ideas. Do-it-yourself pvc pipe products DIY pvc pipe table

Today we will share with you another useful ideas for country crafts made from ordinary plastic pipes, the remains of which since the advent of the country water supply system are probably gathering dust somewhere in the attic.

In any case, the price of the issue here is simply incommensurable with the opportunities and inspiration that these affordable plumbing wonders will give you.

Let's start, perhaps, with utilitarian structures intended for the garden and vegetable garden.Greenhouses, greenhouses and light frames on the beds for sheltering plants, assembled from polypropylene pipes and connecting elements, are a very budget option that combines low cost and ease of assembly. If necessary, they can also be easily dismantled.

In addition to the theme - strong and stable racks for growing and working with seedlings. PVC pipes of a larger diameter, neatly sawn from above with a jigsaw and filled with soil - a compact and aesthetic option for planting greenery.

Crafts from plastic pipes in the style of vertical gardening of a terrace or flower garden design confirm that everything ingenious is simple!

What can we say about the organization of a portable drip irrigation system, indispensable for lawn irrigation or a mobile design for a watering hose. All the benefits are there!

No less in demand in the country economy are such trifles as a woodcutter, a garden cart, a gate or a stand for spinning rods. Admit it, it never crossed your mind, did it?

For orderly storage of garden equipment and tools - a few more useful ideas that are just asking to be implemented immediately.

Pieces of pipes fixed on a wooden plank can serve as supports for pencils. And vertically arranged cylinders can serve as a supply for tools. To prevent tools from falling down, the bottom of the pipes can be foamed with mounting foam.

Yes, we almost forgot about parking for bicycles and scooters in case guests arrive. Plastic pipes come in handy here too!

In the country, it is customary not only to work, but also to indulge in idleness. Simple designs of garden furniture, assembled from polypropylene pipes, will help you relax and unwind in a shady corner of the garden.

Do you want such a chair for babies made of PVC pipes? This is well within our power!

You will need for the frame (I write in inches, so as not to customize, whoever needs it will translate, I would just use an inch ruler):
8 pieces of elbow
6 T-pieces
1 PVC pipe (choose good quality, durable) cut into 16 pieces:
7 pieces per 10 inches
2 pieces for 6 inches
4 pieces for 4 inches
4 pieces by 5 inches.
For the seat:
29.5" x 17.5" fabric, 1/2" mid-seam.

Sewn on the long side. The seam is turned over to the middle of the back side, but this is up to you.

The short sides are sewn together, leaving a hole for eversion.

The short sides are tucked in 3 inches and sewn.

To cut the pipe, you will need special scissors or a hacksaw / saw, and best of all, a strong man with the necessary skills.

The cut parts are assembled according to this scheme.

Can be painted, but after painting it was difficult to assemble, the thickness of the pipe has changed, so that should be painted after assembly .
It is said that 100% acetone erases the inscriptions from the pipe.

How do you, for example, comfortable models of chairs? Choose for every taste!

How about a comfortable garden swing?

A comfortable sun lounger, an impromptu canopy for a morning meal in the fresh air, or such a “life hack” stand model that allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

In the country, you always need reliable shelves

Children in the country are a separate burning topic. The ubiquitous children must be given the opportunity to play and misbehave in such conditions that parents are calm.

For kids, right in the country, you can assemble such a convenient playpen or a cozy toy house. These designs are easily transferred to the garden or to the veranda, and your child will always be in your field of vision.

Older tomboys will surely enjoy playing with water. Build just such an impromptu "car wash" from plastic pipes, and the joy of the kids will be no limit. By the way, a great way to wash the child without forcing, without driving him into a common shower.

Well, since we are talking about water procedures, take advantage of these useful ideas for towel dryers and air mattresses. Do you have a swimming pool on the site?

Finally, we bring to your attention some interesting ideas for the design of a country interior. Pay attention to the original coffee tables and a compact TV stand.

A shelving unit constructed from plastic tubes for storing laundry, clothes hangers and even a bunk bed. For jacks of all trades, there are no unconquered peaks!

If you cut PVC pipes into thin rings, you will get a universal ornamental material, from which both a wonderful frame for a mirror and a decorative partition will come out. You will need glue, a stencil and a flat surface.

Small sections of wide diameter pipes make excellent racks for storing shoes, towels in the bathroom, as well as cute bottle holders. Or here's another, enchanting idea for decorating the hallway!

Creative and textured bookshelves, a hanger in the hallway or the simplest wardrobe fixture, assembled from ordinary plastic tubes, are a great way to get rid of routine and boredom at home.

And what, you thought this is all that can be created with the help of plumbing fixtures? No matter how! The pinnacle of engineering, we meet - table lamps and floor lamps. Unexpected, right?

Well, until you regain consciousness, another blow to the theory of Darwinism - elegant floor lamps and lampshades made of plastic pipes. Are you weak?

Here are some useful ideas for country crafts made of plastic pipes that we found on the Internet. Get inspired, dare, and may technical progress help us!

After construction and repair, there is always a lot of waste, most of which has nowhere to adapt. However, some garbage is not at all useless - for example, you can make simple and comfortable furniture from plastic water pipes that will organically fit into the industrial interior of your home.

In the country, such household items are good because they are easy to assemble and disassemble, and because of their small mass it is not difficult to carry them from place to place.

Advantages of plastic crafts

Is it worth bothering with PVC pipes when you can buy simple furniture in any store? Of course, it’s worth it, because it will not only bring satisfaction from working with your own hands, but also make life easier.

Products made of polypropylene pipes have many advantages:

Do-it-yourself assembly takes a little time and does not take much effort - both a young mother and even a teenager can cope with the work.
Pieces of furniture made of plastic pipes are very light, which will not cause difficulties when rearranging.
Rigidity - pipes withstand a sufficiently high load.
Resistant to aggressive conditions, thanks to which products can be safely placed outdoors.
Wide scope for design ideas - it is easy to make simple chairs for a summerhouse, a small wardrobe, a children's bed or a playhouse for kids from PVC.
Low cost - if a young family is just getting on its feet, you can not spend money on expensive furniture and assemble it yourself from polypropylene water pipes available to everyone.

What do you need to make furniture?

Assembling PVC furniture with your own hands is not at all difficult - you will need a minimum set of tools, basic skills in working with them and a little creativity. The result is sure to be comfortable chairs, armchairs, shelves and even tables - the range of possible products is limited only by your imagination.

The assembly process will take no more than an hour for each item - and this includes design. By the way, in order to quickly figure out how to form a particular piece of furniture, on our website you can see a variety of photographs of plastic products. For example, the photo above shows a very convenient and stylish rack for books and magazines, and when supplemented with flat shelves, other items can be placed on it.

The minimum set of necessary tools is as follows:

roulette;
marker;
hacksaw for metal.

Other items that can be found at any summer resident may come in handy - a file for smoothing cuts of plastic pipes, a drill, a soldering iron. But the level, for example, is not needed - all parts, as in the assembly of ordinary water pipes, will be connected with special fittings - it will not be possible to deviate from the desired angle with all desire. Because of this feature of PVC products, separate fasteners are not needed - screws or glue.

Important: despite the fact that working with products made of polypropylene pipes is very safe, you should use protective equipment - goggles and gloves.

furniture assembly process

In general terms, the assembly of household items from polypropylene pipes is no different from any other work with this material. You should develop a project for the future product, select PVC pipes of suitable length and diameter, and you can start assembling with your own hands.

Let's analyze the technology using the example of assembling a simple chair for a summer residence - such as in the photo above. The process will consist of just a few steps:

Pipes of suitable size are selected; if there are none, you can cut off the excess from too long plastic elements.
With the help of suitable fittings and a soldering iron, the frame of the product is assembled.
The soft seat will increase the comfort of using the chair. To make it, you need to take a piece of not too thick plywood that is suitable in size, put a square of foam rubber on top of it, which is then covered with a thick cloth. It should be larger than plywood so that the edges can be fixed with a stapler under the seat.
The seat is fixed on the frame with self-tapping screws.
If the furniture is still not comfortable enough, you can make a soft back in the same way.

Of course, the chair can have almost any shape. If you take PVC pipes of a larger diameter and bend them with a blowtorch, then attaching them to the legs from below, you can get a rocking chair. By extending the seat, you can get a comfortable and waterproof deck chair made of plastic pipes, which does not have to be constantly dried.

Other pieces of furniture are assembled in a similar way - clothes dryers, laptop stands, table frames and much more. The design can be very different, and you can improve it a little more by painting the resulting product. For this, it is best to use acrylic paint - it looks bright, has many shades and does not deteriorate when cleaning furniture.

Plastic items without fittings

There is no need to make crafts from water pipes in such an industrial style. You can come up with products that will have no less functionality, but for the assembly of which neither fittings nor a soldering iron are needed.

So, from scraps of pipes of different diameters, you can make a convenient organizer for various little things - office supplies and similar useful little things. To do this, PVC pipes are cut at an angle and the cut end is screwed to a board that can be fixed to the wall. You can simply arrange the pipes on the surface of the table - in any case, you get a very convenient fixture, as in the photo above.

In the same way, you can make designer details of almost any piece of furniture. There are excellent options for plastic beds and coffee tables - a large number of polypropylene pipes of the same or different diameters are fastened close to each other, and a hard sheet of plywood or other even material is placed on top of them under the mattress, and in the case of a table, you can immediately install the countertop. One of the options for such a bed is in the photo below.

Building a house or renovating an apartment is always accompanied by a bunch of leftovers from consumables. Pipeline repair is also no exception, because after replacing metal pipes with plastic ones, there are a lot of scraps left, as well as connecting elements - fittings that many owners simply throw away.

However, there are also such creative people who can make durable and original furniture out of such rubbish, for example, tables or chairs, as well as other household items such as an organizer. In this article, we will analyze in detail some of these PVC pipe ideas.

Do-it-yourself children's chair made of plastic pipes

Polypropylene is a hypoallergenic and non-toxic material, so you can make various children's furniture from it without worrying about the health and well-being of the child. By embodying ideas from plastic pipes with your own hands, you can easily assemble a table, playpen, chair, etc.

One of these simple projects can be a comfortable highchair, which is assembled from pipes and fittings like a designer. The size of each detail will depend on the size of the desired result, but below we will give instructions in which we will tell you how to make a chair for a five-year-old child.

To make a chair, you will need the following materials and tools:

Glue for PVC;
Approximately 3 meters of polymer pipe;
6 T-fittings;
8 elbow fittings (90°);
Durable fabric;
Saw with fine teeth;
Sewing machine;
Scissors.

Building a chair:

The first step is to cut the pipe into segments: 7 pcs. 33 cm(A), 4 pcs. 20 cm(B), 4 pcs. 13 cm(C) and 2 pcs. 18 cm(D);
Take two parts A and fasten at all ends to the corner fitting;
Insert all elements B into each of the fittings;
On each element B, put on T-shaped connectors, unscrewing their perpendicular part perpendicular to element A;
Connect the T-fittings in pairs with elements A. As a result, you should get parallel legs of the chair;
Insert all elements C into the free ends of the fittings;
Next, you need to put the structure so that the ends of the legs "look" at you;
Take two corner fittings and put them on the parts C closest to you;
Slip the two T-pieces over the C pieces further away from you, turning them so that the center connections are facing you;
Next, you need to connect the inserted fittings with parts A parallel to the legs of the chair;
We insert parts D into the free ends of the T-shaped fittings and put on them the corner fittings, turning them “face” to each other;
We connect them with element A, finishing the back of the chair;
Make a seat out of fabric by stretching it between parallel bars;
Glue all connections, after which, let the chair dry.

Office table with plastic frame

Buying even the cheapest office desk can be a big deal for some people, so we'll show you how to make a desk out of plastic pipes. This project differs from the previous one in its complexity, so you will have to think through some parts on your own, but we will try to explain everything to you as clearly as possible.

First of all, you need to decide on the size of the table. In our case, we take a finished worktop (915x2030 mm), under which we will assemble the frame. When choosing a countertop for your own table, pay attention to its weight and be guided by the rule: the less weight, the better for your table. The best solution for a countertop would be a hollow door leaf. You can also assemble the countertop yourself using flat boards, fasteners, a saw and a drill.

First of all, prepare 12 meters of plastic pipe and cut it into the following parts:

5 pieces of 7.5 cm;
10 pieces of 30 cm;
4 pieces of 50 cm;
And 4 pieces of 75 cm.

Of the other parts for the frame, you will need the following:

4 T-fittings;
4 four-way fittings;
2 cross fittings;
10 caps for pipes and fittings.

Having prepared all the necessary details, you can begin to assemble a table from polypropylene pipes. The first assembly is best done without the use of glue, and after assembly, glue all the joints one by one. Start the assembly by constructing the sides of the frame, on which the countertop will rest.

Next, assemble the back, which will connect the two already assembled. To give the table additional stability, we recommend making a third leg on the back wall. When assembling the table, carefully monitor the parallelism of all elements in order to end up with an even design.

At the final stage, it is necessary to connect all the parts into a single structure, having received the table frame. Check it for strength, correct the irregularities, after which, glue all the joints.

To fix the table top:

Lay the tabletop on the floor, turning it "face" down;
Place the frame on top so that the top plugs fit snugly against the countertop;
Circle adjacent plugs;
Disconnect the plugs from the pipe, screw them to the countertop at the marked places;
Install the table frame, and put the tabletop on it so that all the plugs fall into place.

As a result, you will get an excellent table made of PVC pipes with your own hands. This material is so versatile that you can even make a PVC pipe bow that will work just fine.

Shelving for summer cottages

After repairs, not only polypropylene pipes can remain in the house, but also a metal profile, from which you can try to make a shelving for a summer residence without using welding. For work, we need only a tape measure, a pencil, a screwdriver and a hacksaw.

First of all, it is necessary to design the future rack. Draw a diagram on paper, observing all dimensions. Next, you can buy a profile to an existing one, as well as find several sheets of plywood 15 mm thick. You can also make a PVC pipe rack with your own hands using a profile diagram.

Let's analyze the manufacturing process using a specific example:

Take the profile and cut it into pieces: 4 vertical posts, 8 front and 8 rear crossbars;
Collect 4 frames, which should become shelves in the future;
Using self-tapping screws, fix the received frames on vertical racks;
If desired, you can screw the rack to the wall and paint it, after which, lay the plywood on the frames, making the shelves.

Various interior elements made of PVC pipes

To decorate the interior, as well as create useful PVC pipe structures, you can use very short lengths of pipes. So you can make organizers from short pipes, where you can put shoes, writing utensils and other small things into the holes.

You can also easily make wine shelves from PVC pipes with your own hands. To do this, simply glue a few pipes, and screw the resulting structure to the wall. Similarly, you can make a holder for glasses. To do this, it is enough to cut the plastic pipe lengthwise, after which, fix it on the wall. The leg of the glass fits perfectly into the cut hole, and the rigidity of the polymer pipe does not allow it to fall out.

If your house does not have enough space for outerwear, then a plastic pipe hanger is an excellent solution to this problem. You can design and assemble such a hanger, starting from examples with a table and a children's chair.

In conclusion, I would like to say that plastic pipes are a cheap and light raw material for creating various decorative elements. Any object created by you can always be painted, covered with sparkles, or decorated with various elements, for example, shells glued on glue. Polypropylene rings can also be used for seasonal decoration of an apartment, for example, for the New Year, you can make a wall panel and fill it with New Year's paraphernalia, such as balls and figurines.

As you can see, in order to create a cozy atmosphere and decorate an apartment, it is not necessary to spend a large amount of money, because the main thing is a creative approach that will allow you to create the desired result at minimal cost.

In the country, such household items are good because they are easy to assemble and disassemble, and because of their small mass it is not difficult to carry them from place to place.

Advantages of plastic crafts

Products made of polypropylene pipes have many advantages:

Do-it-yourself assembly takes a little time and does not take much effort - both a young mother and even a teenager can cope with the work.
Pieces of furniture made of plastic pipes are very light, which will not cause difficulties when rearranging.
Rigidity - pipes withstand a sufficiently high load.
Resistant to aggressive conditions, thanks to which products can be safely placed outdoors.
Wide scope for design ideas - it is easy to make simple chairs for a summerhouse, a small wardrobe, a children's bed or a playhouse for kids from PVC.
Low cost - if a young family is just getting on its feet, you can not spend money on expensive furniture and assemble it yourself from polypropylene water pipes available to everyone.

What do you need to make furniture?

The minimum set of necessary tools is as follows:

roulette;
marker;
hacksaw for metal.

Important: despite the fact that working with products made of polypropylene pipes is very safe, you should use protective equipment - goggles and gloves.

furniture assembly process

Let's analyze the technology using the example of assembling a simple chair for a summer residence - such as in the photo above. The process will consist of just a few steps:

Pipes of suitable size are selected; if there are none, you can cut off the excess from too long plastic elements.
With the help of suitable fittings and a soldering iron, the frame of the product is assembled.
The soft seat will increase the comfort of using the chair. To make it, you need to take a piece of not too thick plywood that is suitable in size, put a square of foam rubber on top of it, which is then covered with a thick cloth. It should be larger than plywood so that the edges can be fixed with a stapler under the seat.
The seat is fixed on the frame with self-tapping screws.
If the furniture is still not comfortable enough, you can make a soft back in the same way.

Plastic items without fittings

Do-it-yourself furniture from pipes can be made from the remnants of materials that are used during installation and repair work on the arrangement of various pipelines. For example, shelves, tables, chairs, as well as organizers are made from such an unusual material.

They are distinguished by their original appearance and can last for several decades without losing it.

Despite the fact that some craftsmen make furniture from metal pipes with their own hands, it is still better to use plastic for this. At the same time, polyvinyl chloride or PVC is usually used for such crafts as the cheapest type of plastic. Sewer pipes are mainly made from it, since, having all the advantages of polymers, it is quite inexpensive.

Plastic pipes are resistant to rot and rust

If we mention the advantages of plastic products that allow you to make furniture from propylene pipes with your own hands, then these include:

high strength;
durability;
resistance to decay and rust;
ease of installation.

At the same time, it is always worth remembering that this type of pipe is afraid of exposure to high temperatures, under the influence of which the plastic is deformed. In this regard, in the event that you are going to assemble furniture from water pipes with your own hands and install it in a room where a high temperature will be maintained, for example, in a bathhouse, you should use polypropylene for this product, and not polyvinyl chloride .

Service life of polypropylene pipes

Polypropylene can withstand temperatures up to +60°C and is much stronger than polyvinyl chloride, but products made from it are more expensive.

PVC pipe bone lamp

Important! The popularity of using plastic pipes in design is due to the ease of installation.

The fact is that any product can be mounted from them quite easily with the help of fittings, as well as gluing. At the same time, you can not only make furniture from a profile pipe with your own hands, but also make many other products from them:

stands;
decorative elements;
portable structures;
small architectural forms.

So, for example, in the garden of plastic pipes, you can make original gazebos or benches. By the way, if necessary, they can be easily disassembled. It is also worth noting that some owners of household plots build quite functional structures from pipes, for example, greenhouses.

Scheme of a gazebo made of PVC pipes

In any case, in order to make various products from plastic pipes, it is enough to know the basic principles of their installation and have a healthy imagination. There are no other requirements to meet for this. Therefore, collect the remnants of plastic pipes, and also learn how to make furniture from a profile pipe with your own hands in the photo. You can take such educational material on the Internet on specialized sites dedicated to interior design.

Basics of working with plastic pipes

In order to be able to make furniture from pipes with your own hands, you need to understand the general algorithm for working with plastic.

Types of plastic pipe connections

So, working with them usually includes the following operations:

selection of the installation scheme and drawing up a sketch of the product;
cutting pipes of the required size in the required quantities;
assembly of the frame and individual elements using fittings, glue or soldering;
checking the resulting product for strength.

The scheme for assembling a particular type of furniture can be developed independently or taken from specialized sites. For example, you can use any classic furniture as a model. In this case, of course, it is necessary to make allowances for the peculiarities of the technical characteristics of plastic pipes.

The design of the metal-plastic pipe

If we talk about small furniture that will not be used at elevated temperatures, then there is not much difference in choosing the type of plastic. The only thing worth paying attention to is the price. The fact is that polyvinyl chloride is much cheaper than polypropylene, so it is quite suitable for such crafts.

Do-it-yourself furniture made of polypropylene pipes should be done in the case when increased product strength is required. The fact is that such products have walls several tens of mm thick, which allows them to withstand very serious mechanical loads. In the same case, when you need to assemble overall furniture, it is recommended to combine pipes made of polypropylene with PVC pipes. To do this, PVC products are spent on the installation of elements of lightly loaded areas, and polypropylene is used to create a supporting frame.

In the event that you buy pipes, do not purchase products with reinforcement. The fact is that they are much more expensive than simple ones, but there is no special benefit from them. In order to distinguish simple pipes from reinforced ones, it is necessary to study their surface. If it has a strip of red, blue or green, then these are reinforced pipes and it is unnecessary to buy them.

Important! To cut the prepared pipes to the desired length, you will need to use a pipe cutter or special scissors.

In order to make furniture from pipes with your own hands, fittings for diffuse welding will also be needed. In addition, they can be connected with special glue for plastic. This method is very relevant in the case when you do not have a special welding machine at home. Threaded fittings can also be used in this case.

Soldering iron for welding plastic pipes

Making a chair from plastic pipes

In order to learn how to assemble furniture from pipes with your own hands, you need to start with fairly simple products. For example, a novice furniture maker can make an ordinary chair. This very simple design consists of a base frame, legs, backrest, as well as a stand on which they sit. In this case, the backrest can be installed here as desired.

This simple design consists of a base frame, legs, backrest, as well as a stand on which they sit.

The immediate stages of work on this product are as follows:

leg assembly;
frame installation;
mounting with self-tapping screws to the frame of a stand made of plywood sheet;
welding chair legs;
strength testing of the structure.

Do-it-yourself furniture from PVC pipes can be made in this way using fittings. In this case, you can disassemble the structures, if necessary. If you do not need to do this, use welding. By the way, it will be possible to install a seat made of foam rubber on a stand screwed onto the frame.

It will be possible to install a seat made of foam rubber on a stand screwed onto the frame

In addition to the chair, a novice home craftsman can gain experience in the manufacture of plastic products by creating coasters and shelves from pipes. There are a huge number of options. So, for example, the simplest design is made on the basis of a single frame, on which special holders are mounted. With their help, a shelf or stand can be attached to the wall.

The simplest design is made on the basis of a single frame, on which special holders are mounted.

By the way, many people forget that plastic can be additionally decorated. So, it is quite well painted with acrylic paints. Another option for decorating products from it is the use of plastic pipes of different colors. Unfortunately, the set of colors here is small: white, black, gray and brown, but with their help it will be possible to make a product that is quite interesting from a color point of view.

However, experienced designers can use such a tool to decorate almost any room in a very unusual way. For example, you can make several original organizers for cleaning products, shoes or toys. It is enough just to glue several tubes together.

You can also make ordinary decorations out of plastic, which can combine the functions of the same organizer. So, for example, with the help of scraps of plastic pipes, mirrors, wooden furniture, walls of rooms are decorated. As a result, an unusual in terms of design and at the same time functional space is created.

Do-it-yourself dryer for things made of PVC pipes

Features of the manufacture of furniture for the nursery

If you decide to seriously make furniture from plastic pipes with your own hands for use in everyday life, you must remember that for a children's room such products must be made taking into account special requirements. The fact is that safety is very important for children. In this regard, it is better not to use plastic pipes in the children's room that can emit harmful substances. In addition, furniture made from it should not have sharp corners.

Do-it-yourself canopy over a crib

If you are going to assemble children's furniture from plastic pipes with your own hands, the photo of each of its elements should be studied separately. Thus, even before the installation process, you can highlight the most dangerous elements of the same bunk bed and eliminate them. In addition, according to the photo, it will be possible to coordinate the future situation in the child’s room with other members of your family.