Sofa layout mechanisms. Sofa transformation mechanisms

The sofa, as you know, is an integral part of any interior and, as a rule, one of the most important elements in the apartment.

At the same time, the search for the very sofa that will delight you and your loved ones, as well as be able to fit the whole family and fit amazingly into your particular interior is quite difficult. You can Buy a sofa in Moscow of any design, but first you should decide what you need.

In our today's article, we will try to understand in as much detail as possible how not to make a mistake with the choice, what types of sofas exist and how to find the right option for you?

What are the types of sofas

There are a huge number of sofas on the market with a different set of characteristics, which we will dwell on in more detail. It should be said that the choice of a sofa should be made consciously, weighing all the pros and cons, as well as starting from the purpose for which you need it.

After all, you must admit that if you are part of a large family that often comes to visit you and stays for a couple of days, you can’t do without a folding mechanism, and if you just spend a couple of hours a week on the sofa, then you don’t need such a mechanism and not worth paying for it. Now let's take a closer look at the types of sofas.

Transformation mechanism. Whichever sofa you choose, each of them can be equipped with a folding mechanism. And by the way, such mechanisms are also different in the way the sofas are laid out:

• “Book” (the most traditional mechanism that is familiar to everyone, in order to bring this sofa to a horizontal position, you need to raise the seat up until it clicks, and the back will automatically lower, creating a sleeping place, a certain disadvantage of such a mechanism is that you cannot put the sofa close to the wall)
• "Eurobook" (in this case, in order to bring the sofa to a horizontal position, it is necessary to push the seat forward and tilt the back into the vacated space, a significant advantage of this model is the ease of transformation and soft back)
• “click-clack” (this mechanism is also similar in unfolding to a “book”, but in addition to this, it has the function of fixing the back and the ability to install it in several positions, such a nuance will allow you to choose exactly the angle of inclination at which it will be convenient to relax, but in this case, the sofa will also need to be installed at a distance from the wall)
• "dolphin" (this model is most often found in corner sofas, in this case the pillow is pulled out from under the seat and pulled up with a special loop, being installed flush with the main seat, this is an extremely popular mechanism that also has a linen box)
• “French folding bed” (a mattress is tripled under the seat in the sofa, which is subsequently unfolded, this is a very comfortable and compact model, though it is hardly suitable for everyday use)
• "Accordion" (in order to expand the sofa, it is necessary to push the seat forward and expand the double-folded back, such a sofa has large dimensions and transforms into a full-fledged and comfortable sleeping place, although the appearance of such models leaves much to be desired and over time, ugly creases remain on the mattress)

The sofa is an integral part of the furniture. It serves as a place for relaxation, an area for receiving guests or for evening gatherings with the family. If the area of ​​​​the living room in your apartment or house allows you to install a separate sofa, then there should be no problems with choosing it. However, for small rooms it is worth choosing functional models that combine a sofa and a bed at once. Of course, it is better to purchase a sofa bed ready-made, having previously considered its main features.

The sofa bed is a comfortable design that can be used in the living room to divide the room into several zones, it can also act as a place for meeting guests or just for family conversations. And at night, the furniture can become a full-fledged bed with two sleeping places.

The popularity of sofa beds is ensured by the presence of a number of positive qualities:

• Great for saving space in a small space. The sofa can be easily installed in a one-room apartment, while it can fully replace several pieces of furniture at once;
• special small sofas can be a great sleeping place for children and teenagers. They can be used for 5 years or more. Some models have a sliding design that can be increased;
• for the upholstery of this furniture, high-quality fabric is usually used, which can be cleaned and has long-term wear;
• designs with leather upholstery will be an excellent option for living rooms decorated in a classic style. A leather sofa will give a rich and luxurious look to the interior;
• sofa beds have a simple design, for this reason they can be easily made by yourself. Such an option as a do-it-yourself sofa bed is perfect for a country house;
• inside the sliding sofa has a space that can be easily used to store various things, bedding;
• modern folding sofa beds are equipped with a comfortable orthopedic mattress;
• The mechanism is easy to operate. Roll-out, sliding, folding models can be easily disassembled, even a child can handle this task.

Ways and mechanisms of transformation

Sofa bed for daily use has many positive qualities. But before purchasing this product, it is worth considering its methods and mechanisms of transformation. They are diverse, but at the same time they have distinctive features.

Book

The classic sofa book is a folding design with a simple unfolding mechanism. This model can easily be converted into a double bed. The design has two components, which can be upholstered in dense fabric material.

The components of the sofa are connected by hinged elements. The base of the product is made of durable material. The frame can be made from wear-resistant wood or plain plywood. This model can be installed in a small living room or children's room.

How to unfold and fold the sofa:

• to expand the structure, you need to raise the seat until it clicks;
• after that, the seat is lowered and the sofa unfolds;
• the product is also easy to fold - the seat rises until it clicks;
• then it lowers, and the sofa returns to its original position.

The positive features include the following:

• for folding products with a book mechanism, the design is as simple as possible, which easily rises and falls;
• due to the fact that the product has a simple design, the sofa book can be made independently. But still, to begin with, it is worth carefully studying the drawings;
• a compact sofa allows you to install a closet and a table next to it;
• varied design - the sofa can be upholstered in different materials, which may differ in color and pattern.

Eurobook

The sofa bed with the eurobook transformation mechanism will be a great area for meeting guests in the living room and a sleeping place for two at night. This design can be roll-out and folding.

Due to the fact that products with a eurobook transformation mechanism are multifunctional, practical and wear-resistant, these products can be used for home and summer cottages. They can become a great vacation spot for adults and children.

Unfolding a sofa with a eurobook mechanism is quite simple. The seat needs to be pushed forward, for this it has special roll-out rollers. A niche is formed inside, in which a part of the structure is placed, which acts as a backrest. The result is a spacious double bed.

The positive qualities include:

• small dimensions allow you to install a sofa bed in the kitchen, in the hall, in the children's room;
• when unfolded, the structure takes up as much space as when folded;
• Included is an additional drawer that can be used as a place to store linen, as well as various things.

On sale you can find an interesting model with a dolphin regulation mechanism. It is considered new, but has already managed to gain increased popularity.

The unfolding is done like this:

• in order to expand the sofa, you need to pull the loops that are attached to the section under the seat;
• pull should be up and towards you;
• then the section is pulled out and installed next to the seating part. The result is a spacious sleeping area.

The advantages include:

• the presence of a comfortable sleeping surface;
• the presence of an additional box for linen, which is located in the non-roll-out part;
• simple and easy unfolding;
• possibility of installation in any room.

Pull-out sofas

Sofas with a roll-out transformation mechanism are considered the most reliable and comfortable. This model is perfect for small apartments, in which every free centimeter is important.

The main features of the sofa with a roll-out mechanism include the following points:

• while unfolding the sofa, you need to pull the strap that is attached to the seat. You need to pull it all the way;
• the seat of this model consists of several layers, which, when transformed, are converted into a mattress for a berth;
• the model may have armrests;
• in the assembled state, the sofa has a small size, it can be easily placed in a small living room, bedroom, and children's room. Especially often used by a similar sofa for a kitchen with a berth;
• additional space inside the product eliminates the need to purchase an additional locker for storing bedding.

Stylish sofa bed with an accordion transformation mechanism has two beds. At the same time, it has a high cost, which is associated with the cost of fastening elements. Externally, this design is a sliding frame made of metal material, which has lateral orthopedic lamellae. On the surface of the side slats, a soft part made of a polyurethane base is installed.

The main features of the product include:

• according to the method of parsing, they are similar to roll-out models. During parsing, you need to lift the upper part and pull it slightly towards you. After that, the mechanism rolls out on its own and is fixed in the desired position;
• after the transformation, a spacious and even sleeping surface is formed, which does not have bumps and depressions;
• one and a half sofa with an accordion design is perfect for children. It can be installed in a room for a boy or girl aged 5 years and older;
• models are produced with a spring block and an orthopedic mattress, so there is no need to spend extra money on buying a mattress.

French cot

The French folding bed has a triple folding mechanism, which is located under the seat cushions. This model is new and not yet widespread enough. Before you unfold the sofa with this mechanism, you need to remove the pillows. After that, it is necessary to pull the handles and extend the lower part, and only then the structure gradually unfolds.

Be sure to study the main characteristics of the sofa:

• the bed is a frame, which consists of three sections connected by hinged elements. It is complemented by a soft orthopedic mattress;
• a multifunctional sofa with this transformation mechanism in the assembled state is small in size, so you can easily install it in rooms with a small area;
• it is more suitable for guests. With frequent use and if the permissible load is exceeded, sagging of the mattress may occur;
• the products have a significant drawback, they do not have an internal storage space. Such a model may be without armrests or may have these elements.

Which upholstery is more practical

Folding sofa beds are considered practical products for daily use. But when choosing, you should pay attention not only to the type of transformation of the mechanism, but also to the upholstery. And it can be made from different materials.

Consider which upholstery for sofas is considered the most practical:

• jacquard - this material has a dense, high-quality basis. It is not subject to abrasion, practically does not fade under the influence of sunlight. Able to maintain the original external qualities for a long time;
• flock - many experts say that it is flock fabric that is a practical material for upholstery of sofas. This is due to its good qualities - durability, wear resistance, strength, environmental safety. In appearance, it resembles velvet;
• chenille - this type of material is often used for upholstery of sofas, which is associated with the high strength characteristics of the base. It has a soft and thick pile, which consists of a harmonious combination of synthetic and natural fibers;
• tapestry - this fabric has been used for upholstery of sofas for a long time and still has not lost its popularity. It has high strength, durability, wear resistance.

Basic requirements for the filler

A modern sofa bed can have a variety of types of fillers, on which the convenience and service life of the product depends. Three types of filling material are commonly used:

• spring bases;
• polyurethane foam filling;
• fillers with a combined structure.

Fillers, consisting of springs and polyurethane foam material, have the same base. The main thing is that they are of high quality. In addition to springs and polyurethane foam, materials such as latex, felt, batting can be used.

Products that additionally have latex, batting, felt in filling are perfect for children's rooms. Sofas can be used as a sleeping place for boys and girls aged 5 years and older.

Models with orthopedic mattress

Currently, modern manufacturers of upholstered furniture offer a large number of models of sofa beds, which are equipped with a comfortable orthopedic mattress. They are perfect for any apartment, regardless of the interior and area.

What are the advantages of orthopedic mattresses? Consider the main positive points:

• orthopedic mattresses are designed specifically for humans. It does not put a load on the spine, does not cause discomfort and inconvenience;
• products are able to withstand increased loads, they do not bend or sag;
• can withstand repeated folding and unfolding of sofas;
• the surface of orthopedic mattresses has a relief structure, due to which normal ventilation is carried out, which protects against fungi and mold.

Popular manufacturers of such models include the following companies:

• Ascona is a well-known manufacturer of comfortable upholstered furniture with orthopedic mattresses. When developing, the anatomical features of the structure of the human spine are taken into account, so sofas will never cause inconvenience and discomfort. This manufacturer produces a bed with a sofa below, which combines several functions at once. It is also equipped with an orthopedic mattress with a flat surface. Popular models of sofas from this manufacturer include Karina, Vega, Antares, Karina angular, Orion, Antares angular;
• manufacturer called "A lot of furniture". This is a popular network of furniture factories, which is distributed throughout Russia. In the assortment you can find high-quality models of sofa beds with a structure made of durable solid wood. They are all equipped with a comfortable orthopedic mattress. Popular models include Atlanta, Madrid, Amsterdam, Monaco;
• Ami furniture is a popular furniture brand from Belarus. The manufacturer offers high-quality models of sofa beds, which are made of durable construction with good filler. The following models are considered popular - Jacqueline, Fiesta, Martin, Chester, Fortuna.

When choosing sofas that can be used as beds, you should pay attention to many qualities. It should be borne in mind that this furniture will be used not only for meeting guests or for a place of rest in the living room, but also for a full-fledged sleeping place.

Buying a sofa is a very responsible process, because such furniture is bought for more than one year. The choice must be approached with special care so that the new sofa is comfortable for all family members, successfully harmonizes with the interior and pleases with its functionality for a long time.

First of all, the sofa is a comfortable relaxation area after a hard day, a place for friendly gatherings and watching movies. Often it is also used as a place to sleep. When buying, we usually pay attention to the appearance, but it will be much more important to make sure of the quality of the material and check the folding mechanisms of the sofas.

Before you go on a furniture shopping trip in search of a sofa, answer the following questions:

1. How much space do you intend to allocate for the sofa when folded and unfolded?
2. How often are you going to lay out the sofa?
3. In what mode will the sofa sleeper function: daily or as a guest option?
4. What load should the sofa withstand?
5. Do you need a special place to store clothes?
6. How much are you willing to spend on a purchase? Which model should you pay attention to: a budget option or a sofa with a more complex mechanism and reliable details?

Types of mechanisms, pros and cons

Types of sofas by folding mechanism:

• retractable, or withdrawable (on rollers): withdrawable, dolphin, eurobook, conrad, pantograph;
• folding: tango, book, elf;
• deployable: accordion, French cot, American cot, Spartak.

Let's consider in more detail each of the options.

Book

Having such a mechanism for transforming sofas, a piece of furniture is converted into 2 positions: a seated version and a sofa for sleeping. To turn the sofa into a sleeping place, its back is simply folded back. It will not have to be moved away from the wall during this process, since during installation it will be necessary to take into account that the design of the furniture requires a small gap between the wall and the back.

Parts of a sofa with a "book" mechanism are two metal or wooden frames with fixed or other soft filler. At the bottom, there is often a compartment for storing clothes.

Pros:

• strength;
• reliability;
• ease of use;
• can be used frequently without the risk of breakage and wear.

• has only two positions - lying and sitting;
• the inability to move the sofa tightly against the wall.

Tango

"Tango" is the prototype of a sofa folding system called "click-clack". Many manufacturers seek to simply surprise the buyer with a beautiful new term. In general, this system is very much like a classic "book". There is only one difference - when unfolding, such a sofa can also take intermediate positions, and not just “sitting-lying”. The backrest can be adjusted to a comfortable level. These sofas are equipped with a bed storage box.

• fixation of the back in several positions;
• compact size;
• when unfolded, the sofa creates a surface without bumps.

Minus - you can not attach the back tightly to the wall.

Eurobook

Such a mechanism for unfolding classic sofas, like the Eurobook, is easy to identify by pushing the seat forward on roll-out rollers. In this case, a niche is formed in which a part of the sofa, which previously served as the back, fits.

• ease of converting the sofa into a bed;
• reliability of the mechanism;
• plenty of space to sleep;
• large niches for storage.

Minus — due to excessively large seats on the sofa, people with small stature and children will not feel comfortable, because they will not be able to lean on the back.

Dolphin

This is the most popular mechanism for transforming corner sofas. To unfold it, you need to pull the loops attached to the section under the seat. The movement should be up and towards you. The section will roll out and stand next to the seat, forming a large bed. The laundry box is located in the non-roll-out part of the seat.

Note: The dolphin mechanism exerts a heavy load on the sofa body, so you need to make sure that it is made of high-quality wood.

• comfortable bed;
• simplicity and ease of deployment.

Minus - not very long service life with the active use of the mechanism.

Pantograph

These types of folding sofas can often be found under the name "puma" or "tic-tac". This system arose as a variant of the Eurobook, only without roll-out rollers. Inside there is a spacious bed box.

To transform this sofa, you need to pull up the seat of the sofa, grabbing its edge in the middle. With this movement, you will activate the mechanism that pushes the seat up and forward and opens the legs of the support. In the resulting niche, lay the back-pillow.

• comfortable place to sleep;
• easy folding mechanism;
• does not spoil the floor covering with rollers.

Minuses:

• the mechanism is expensive;
• very wide seat.

The sleeping surface of such a sofa is represented by three sections. To straighten them into a plane, you just need to pull the edge of the seat. For frequent use as a bed, such furniture is not recommended, since these types of sofa folding mechanisms wear out very quickly.

Tip: For unfolding, you need to take care of the presence of a fairly large space.

Plus - when assembled, this sofa is very compact.

Minuses:

• the sleeping surface has irregularities;
• short service life.

Roll-out sofa

The bed has two segments that are hidden in the sofa body. To unfold, you need to pull the bottom part so that it rolls forward. After that, the pillow leans back into the vacant space.

• very durable and reliable mechanism;
• comfortable place to sleep;
• compact dimensions when assembled.

Minuses:

• roll-out rollers can scratch the flooring when unfolding;
• low bed.

Accordion

"Accordion" got its name for some resemblance to the musical instrument of the same name. The sleeping space of the sofa stretches in a peculiar way, moving forward at the moment of unfolding, and then rests on the extended mobile legs. When folded, such a sofa has compact dimensions, but more space is required for transformation. The storage compartment is located in the back of the sofa.

• reliable and stable mechanism;
• long service life of the sofa;
• ease of transformation.

Minuses:

• there is no built-in place for linen;
• draw-out type of mechanism can cause scratches on the flooring.

Spartacus

To transform such a sofa into a comfortable place to sleep, you need to pull the seat so that it decomposes in three steps and stands on extended legs. This type of folding sofas was jointly developed by Russian and Italian craftsmen. Such furniture is very well suited for sleeping. The design of the mechanism provides a long berth. In fact, this is a more durable French clamshell, complemented by a welded metal grill.

• strength and durability of the mechanism;
• ease of use;
• as a bed can be used often;
• comfortable sleeping place.

Minuses:

• there is no place to store the bed;
• before unfolding the sofa, you need to remove it from it.

Note: There is also a mechanism for laying out Ifagrid sofas, which is similar to Spartak, but also has some differences.

Conrad or Telescope

To expand such a sofa, you need to pull on its lower part. The sections will roll out one after the other, like a telescope, and stand on the supports.

This type of furniture differs from classic roll-out sofas by the large height of the bed.

• reliable mechanism;
• can be used daily;
• compact volume;
• there is a box for linen;
• sleep comfortably.

Minus - the sofa is very heavy due to the massive mechanism.

Sedaflex (American folding bed)

Such a sofa unfolds like a French folding bed, but unlike it, it has not a three-fold, but a two-fold system and a thicker mattress.

• very strong mechanism;
• compact;
• has a quality .

Minuses:

• no storage box.

Elf

This is a sofa with a swivel transformation mechanism. The armrests at the time of the transformation of the bed are bred to the sides, and a comfortable place to sleep is obtained. The armrests in this sofa can be adjusted in height and have several positions.

• compact model;
• comfortable bed;
• due to the use of lamellas, an orthopedic effect is obtained;
• Armrests can be adjusted to suit individual needs.

Minuses:

• the sofa cannot be leaned close to the wall;
• the bed is located in the same place as the seat.

The name of this type of mechanism comes from the English "recline" - to lean back. The transformation takes place thanks to complex mechanisms hiding in the depths of the sofa. With their help, you can adjust the inclination of the backrest and push the footrest to the desired position. In some models, there are also special pillows with vibration massage. The most expensive models are equipped with an electric motor that is controlled by a remote control.

Pros:

• ease of management;
• you can adjust the sofa to the needs of your body;
• comfort in any position.

• very high cost;
• you can only sit, because there is no position for sleeping.

Sofa with unfolding on the floor

The bed has two sections. When folded, they hide inside the sofa body. To convert such a sofa, you need to pull up on the inner edge of the seat. Then make a soft jerk forward and on yourself. The sleeping place does not provide for any supports and is laid out directly on the floor.

• small dimensions when folded;
• the cheapest type of folding sofas.

• not a very comfortable bed;
• there is no area for storing bedding.

What to choose?

As a result, you can determine which of the sofa folding mechanisms has become the best in its category:

• eurobook - the most reliable mechanism;
• tango is the most comfortable to sit on;
• dolphin - the most spacious;
• pantograph, accordion and roll-out - the most comfortable for sleeping;
• tango, eurobook and roll-out - have special storage compartments;
• roll-out and elf - the most compact;
• The book is the most affordable.

When buying any sofa, be sure to inspect its folding mechanism, consult the seller about this, ask questions and demand answers to them. The service life of the sofa and the convenience of its use depend very much on the correct mechanism. If the sofa will rarely be laid out, then you should pay attention to compact models, but not intended for frequent transformation.

tweet

When buying a sofa for home or summer cottage, special attention should be paid to the device of its transformation. The organization of the sleeping space and the durability of the model depend on it. Today, the mechanisms for transforming sofas are very diverse. They are designed taking into account the area of ​​\u200b\u200bthe premises, often they easily turn a sofa into a bed. Even a teenager can handle them. In order not to get confused when choosing, you need to know the principle of operation, the features of each device and the degree of load on the furniture frame.

Types of sofa mechanisms by type of transformation

Three types of sofas can be distinguished, in which special transformation mechanisms are used. They may be located:

• In direct models- representing a familiar design from the main part with or without armrests, having a linen box (and in some versions - a box in which the sleeping block is located).

• In corner structures- with a corner element that has its own functionality in the form of a niche, a spacious box for bed linen or other things. It saves space in your closet.

• In island (modular) systems - structures consisting of separate modules, different in area, but the same in height (depending on their number, they change their functions).

The sofa owes its name to the mechanism of transformation. Although companies come up with an interesting name for each model, the basis of the name that characterizes a particular model is precisely the principle of its mechanism.

The operation of the device does not change - regardless of the type of model (straight, modular or angular). The sofa unfolds forward, sometimes at the same time it rises up, rolls out, extends, turns. If this is a straight view, the base is transformed, in the corner version the sleeping block is added to the corner, forming a rectangular seating area. In modular constructions, the direct part of one module is transformed without affecting others.

The work of any mechanism is not as complicated as it might seem at first glance. The principle of operation of structures is different and has both pluses and minuses. Most of them can fit all types of sofas (straight, corner, modular). For them, the presence or absence of armrests of the model does not matter. However, there are transformation systems that fit only one species.

Sliding and withdrawable

Roll-out forward models are convenient, they are compact when folded, do not take up much space, do not create the impression of a cluttered room. The principle of their work is to roll out the block forward and raise it to the desired height. Sliding structures are models whose details are interdependent, so when transforming one, the other is automatically activated.

"Dolphin"

One of the universal models with a fixed back and a simple transformation device that allows you to place the sofa in the center of the room or close to the wall.

To unfold the model, you need to pull the loop of the box located under the seat, in which the missing section of the bed is located. When the block is extended to the stop, it is lifted by the loop, put in the desired position at the level of the seat. This design forms a spacious and comfortable surface for sleeping, withstands a large weight load.

"Venice"

The principle of operation of the roll-out mechanism resembles the Dolphin. First you need to push the section located under the sofa seat all the way towards you. By driving the transformation device, extend the seat unit, increasing the width of the sleeping bed. After rolling out the block to the stop, it is raised to the height of the seat with the help of loops.

Such designs are convenient. They are often found in corner models, have a lot of free space in the corner elements.

"Eurobook"

An improved "book" is a great option for daily use. It is equipped with a reliable and easy-to-use transformation mechanism that is resistant to daily stress and allows you to place the sofa in the center of the room or against the wall.

To carry out the transformation, you need to take hold of the seat, lift it slightly, pull it forward and lower it to the floor. Then lower the back, forming a sleeping place. Such furniture rarely has a spacious sleeping bed: it is compact both when folded and disassembled.

"Conrad"

The device, which some manufacturers call "Telescope" or "Telescopic", is a withdrawable model. To make a bed out of such a sofa, you need to pull out the section under the seat, raise the base, then put the pillows in the drawer, close the base and place the mats on it, unfolding them like a book.

The design is convenient and allows you to organize a spacious bed without moving the sofa away from the wall. The floor surface must be flat, as for all withdrawable mechanisms, therefore, a carpet laid on the floor may cause the transformation system to fail.

"Pantograph"

The design, known as "tic-tac" - a variant with a walking mechanism. It is an improved version of the Eurobook. To transform, you need to pull the seat forward with the help of the hinges, lifting it up. At the same time, it will itself take the necessary position, dropping down. It remains to lower the back, forming a spacious sleeping place for two.

In some models, the manufacturer has provided additional armrests that limit the seating area. Such a device is durable and does not loosen the body of the model. However, options with a soft back are not very comfortable. To expand such a sofa, it will have to be slightly moved away from the wall.

"Puma"

This model is a kind of "pantograph" - with a slight difference. As a rule, these sofas have a low and fixed back, so such models can be placed against the wall, thereby saving usable floor space.

The transformation is carried out by one extension of the seat - unlike the previous mechanism. When it rises and, falling, falls into place, at the same time, the second block of the sleeping section rises from below (where the seat used to be). Once the seat is in place, the two blocks form a complete sleeping bed.

"Saber"

Convenient roll-out mechanism "saber" provides for changing the size of the sleeping bed with full or partial unfolding. This design is distinguished by a linen box, a high place to sleep.

Sleeper furniture can consist of two or three sections - depending on the model. To expand it, in any case, you need to roll out the seat, under which the linen box is located, forward. At the same time, the backrest leans back, fitting into the desired position.

"Goose"

The original roll-out transformation system, for which you must first roll out the bed block from under the seat, and then raise it to the level of the seat. At the same time, due to the peculiarities of the pillows rising on the back of the structure, there is an increase in the sleeping bed.

Assembly and disassembly of such structures take more time than other systems.

This model is quite complex and not suitable for daily use. But when folded, models with this system are very compact, they look neat, so they can be purchased as upholstered furniture for a summer house or a living room.

"Butterfly"

Sofas-transformers with the "butterfly" system are considered one of the most reliable, durable and durable. Today, such a system is very popular among buyers. She turns a sofa into a bed in just a few seconds. The transformation is carried out in two stages: the seat is rolled out forward, then the upper block is folded back (to the extended rear section).

The advantage of the model is the significant size of the sleeping bed in the unfolded form and compact assembly. The disadvantage of the mechanism is the vulnerability of the rollers during transformation, as well as the small height of the sleeping bed.

"Kangaroo"

The kangaroo transformation mechanism resembles the dolphin system - with a slight difference: abrupt movements similar to kangaroo jumps. It has a lower part, located under the seat, which, when unfolded, easily slides forward. The retractable block rises to the right place, firmly in contact with the main mats.

The main thing that distinguishes such a mechanism is the presence of high metal or wooden legs. The disadvantages of the system include a short service life with frequent transformation. This design cannot be called reliable.

"Hesse"

The device of this mechanism resembles the "dolphin" system. To expand such a sofa, you will first need to pull the loop of the lower section under the seat, pull it out until it stops. The seat will also roll out. Then the block is raised to the level of the height of the berth, the seat mat is lowered back, forming a full-fledged sleeping bed in three parts.

This system is used in straight and corner sofa models. However, it also has its drawbacks, because with the constant rolling out of the block, a large load is created on the frame of the sofa. In addition, if you do not take care of the rollers, the mechanism will have to be repaired after a while.

folding

Mechanisms with unfolding sections are no more complicated than roll-out ones. Usually they are based on the most versatile systems (“frog”), so they do not require more than a few seconds to turn the sofa into a full-fledged bed. For their transformation, it is not necessary to roll out sections from under the seat.

"Click Clack"

The design of such a mechanism has a second name - "Tango". Some manufacturers call it "Finnish". This is a bifold model, an improved version of the classic "book".

To expand the sofa, you need to raise the seat until it clicks. At the same time, the back is lowered back, the seat is slightly pushed forward, revealing the two halves of the block into a single surface for sleeping.

"Book"

The simplest transformation mechanism, reminiscent of opening a book. To make the sofa look like a bed, you need to raise the seat, lowering the back. When the back begins to fall, the seat is pushed forward.

"Scissors"

The corner sofa transformation mechanism, the principle of which is to rotate one section to another - with the unfolding of blocks and reliable fixation of the sections with a metal fastener from below. In this case, a compact sleeping bed is formed with a bedside cabinet, open as a result of the transformation of the sections.

"Caravan"

The design, the unfolding of which is similar to the Eurobook system, however, it has a fixed back, and instead of two sections of the sleeping bed, three are laid out. At the same time, the seat is also raised and simultaneously pulled forward, then lowered to the desired position on the floor. At this time, the next one moves out from under each block, folding together into a single area for sleeping. Comfortable design with a spacious seating area. In some designs, instead of the third section, a folding pillow is used, which stands in front of a fixed back.

Daytona

System with folding fixed cushions that act as a backrest. The device of the mechanism is a bit like a "clamshell". To transform the sofa into a bed, you need to raise the pillows to the top position, then put the lower ones in the allotted places, grab the handle and turn the seat unit down, revealing a two- or three-piece sleeping bed. When the sleeping place decomposes, you will need to lower the pillows, wrapping them on the bed.

"Tornado"

Folding mechanism designed for daily use. The design is based on a double-folding "folding bed", which is hidden in the usual position of the sofa. It transforms without removing the seat, after tilting the back of the model. The design is convenient, it is not very difficult to disassemble, it has steel elements and mesh at the base, as well as mats of moderate rigidity.

deployable

The following devices provide transformation by deploying sections. In most models (with the exception of the "accordion"), the back is fixed and does not participate in the disassembly of the sofa.

"Accordion"

The device of the mechanism, reminiscent of stretching accordion furs. To expand such a sofa, you just need to pull the seat. At the same time, the backrest, consisting of two blocks connected from above, will automatically fall down, unfolding into two halves.

"Belgian cot"

This design is similar to a "cot" hidden under the sofa's modular seat mats. Even externally, the system resembles a familiar piece of furniture with metal supports. The only thing that makes it different is that it is fixed at the base of the sofa and unfolds right out of it, turning the seat unit down

"French cot"

An alternative to the "accordion" system - with the difference that in the latter the bed is made up of three blocks (according to the principle of folding a fan), and in this system the blocks are wrapped inward and unfold when unfolded. They are equipped with stands and have a narrow type of packing, which is a disadvantage of such designs.

If you are going to expand the sofa, you need to remove the modular pillows from the seat.

"American cot" ("Sedaflex")

Such a mechanism is more reliable than its French counterpart. It is not necessary to remove the cushions from the seat before transformation. The system implies identical sections (there are three of them), which are laid out one after another when the seat is raised. Such a mechanism is quite durable, but it is only suitable as a guest option, because it has thin mattresses, there is no compartment for linen and steel structural elements are felt at the joints of the sections.

"Spartacus"

A variant with a clamshell mechanism. The folding structure is located under the seat, consisting of modular cushions. In order for the sofa to become a bed, you need to remove the pillows, freeing the clamshell blocks. Since they are in the wrapped position, they first take the top one, set the desired position by exposing the metal support, and then unfold the remaining sections. This design is not designed for daily transformation - like analogues.

with swivel mechanism

Models with a rotary mechanism differ from other systems in ease of transformation. In them, the load on the frame is minimal, since there is no need to roll out the sections to the stop. They do not need to lift additional blocks.

Both the integral part of the sofa and the component of each block can turn, depending on the model. Such a mechanism is used in corner models, connecting the two halves of the sections with blocks into a single bed. The principle of operation of the system is based on turning half of the block by 90 degrees and rolling it to the other part of the sofa (with subsequent fixation).

With folding armrests

Folding armrests - a unique technique of the transformation mechanism. Today, such sofas are in the center of attention of designers. With their help, you can furnish the children's room, if necessary, adjusting the dimensions of the furniture.

"Lit"

A peculiar design that allows you to change the size of the sleeping bed due to the deformation of the armrests. At the same time, the sidewalls themselves can be positioned at any angle - and even the positions can be different. To transform the sofa into a single bed, you must first lift the armrest inward until it stops, and then bend it outward. These designs are designed for direct varieties of sofas, they are bought for children and teenagers.

"Elf"

A system convenient for small-sized rooms and children's rooms, a large area for transformation is not needed. Furniture can be placed against the wall. This sofa can be compared with its counterpart, it has a compact body and ample space for storing bedding. The seat surface and armrests form a single unit that folds out in length.

With advertisers

Such devices of the mechanism are somewhat more complicated than the others. Moreover, the design of the mechanism allows you to easily change the position of the angle of inclination of the backrest and footrest, creating the most comfortable position for the user. This sofa can be equipped with a massage mechanism, it has a rather solid appearance, but the transformation into a bed is not carried out.

Double and triple folding systems

The mechanisms of transformation may vary. As a rule, the more complex the mechanism, the more components of the bed (the number of additions). Folding and pull-out sofas fall into this category.

Which one is better for daily sleep?

When choosing a sofa for daily use, you need to pay attention to designs in which the load on the frame during the operation of the mechanism is most uniform and does not loosen the body.

It is necessary to choose the right not only the mechanism, but also the degree of rigidity of the backrest, seat. You also need to choose a good upholstery material and pay attention to models with the ability to change covers.

Filling blocks

When choosing a sofa for daily sleep, it is worth considering the block filler. It is of two types: spring and springless.

The first packing options are distinguished by the presence of twisted springs (the position is vertical). We can distinguish between dependent and independent types. In the first case, the sofa bends down. Such mats are unreliable in that they do not have proper support for the spine during rest or sleep (sitting and lying down).

Independent type springs do not touch each other, so each of them works independently, without forcing others to sag where they do not need to. As a result, the back always remains flat, and the load on the spine is reduced.

Springless mats have a remarkable orthopedic effect, this is the prevention of problems associated with the spine. They are not only safe, but also very comfortable, provide a complete and proper rest during sleep.

This type of filler is hypoallergenic, this stuffing is not subject to the formation of fungus, mold. It is resistant to dust accumulation, because there are no significant voids. The best springless fillers include natural or artificial latex, coir (coconut fiber), polyurethane foam type HR.

What's better?

In order for the sofa to serve for a long time, it is better to choose a quality type of filler: a block with independent springs, latex or coir. It is very good if the type of mat is combined - when not only the core of the stuffing is added, but also other material (to give the desired rigidity).

If a latex block doesn't fit the budget, look into HR-type furniture polyurethane foam or synthetic latex. These materials are somewhat inferior to expensive packings, but with proper operation they will last for 10-12 years.

As for the transformation mechanism, “dolphin” designs and their analogues, models with a “clamshell” system, are not suitable for daily use. The most reliable designs for every day are "Eurobook", "Pantograph", "Puma" and rotary mechanisms.

How to choose the right mechanism?

It is impossible to single out one mechanism unambiguously. The choice depends on several factors:

• designated space for the sofa (folded and disassembled);
• the purpose of the sofa (guest option or alternative to the bed);
• load intensity mode (weight control, taking into account the choice of the “correct” seat and back blocks);
• simplicity and ease of use (the sofa should be light, because complex systems break down more often and cannot always be restored);
• the correct diameter of the steel elements (at least 1.5 cm).

In order for the purchase to be successful, the sofa lasted for a long time, you should pay attention to:

• flawless course of the mechanism in operation (it should not jam);
• lack of looseness of the structure during transformation (this is an obvious marriage that reduces the life of the sofa);
• absence of rust, scratches, dents, mechanism assembly defects;
• high-quality upholstery material that will not wear off from the frequent transformation of the sofa (when the sections come into contact);
• strong and durable metal of the mechanism, resistant to heavy weight loads (two or three people);
• the reliability of the frame components to which the transformation mechanism is attached.

It is important to choose the mechanism in which there is no complex design. It will be less prone to breakage.