Interesting crafts from plumbing parts. Crafts from pipes - instructions for designing and installing useful things from pipes (90 photos)

Water pipes can be used in a variety of ways. In today's review, such "non-standard" methods were collected. Each of them deserves special attention, and therefore - a pleasant viewing.

1. Skittles

Home bowling is a great entertainment that will appeal to both children and adults. In order not to spend money on an expensive set for the game, make it yourself. To do this, you will need a small heavy ball and skittles made of plastic pipes.

2. Ribbon organizer

The remains of plastic pipes of small diameter can be successfully used to create a convenient organizer for storing adhesive tape, ribbons, chains and bracelets.

3. Wreath

Decorate the door or wall of your house with an original wreath made from small pieces of polypropylene pipes. As an additional decor, you can use artificial or fresh flowers, Christmas balls, beads and ribbons.

4. Canopy

A light canopy on a frame made of metal water pipes will be a wonderful decoration for an industrial-style bedroom.

5. Dryer

From thin plastic pipes and metal chains or thick ropes, you can make a practical and ergonomic clothes dryer.

6. Tool holders

Individual tool cabinets made from medium diameter polypropylene pipes are the perfect solution for the garage.

7. Garden furniture

Comfortable and surprisingly stylish set of garden furniture made from ordinary plastic pipes.

8. Floor lamp

A fantastic floor lamp made from a water pipe is a stylish accessory in an industrial style.

9. Vase

The remains of plastic pipes left after the repair can be turned into original vases for small bunches of flowers. And to make the vases look more original and noble, paint them golden with an aerosol can.

10. Furniture set

Fantastic armchair and coffee table that can be made from ordinary polypropylene pipes.

11. Flower pot

An original flower pot made from a thick plumbing pipe with holes drilled in it and painted white.

12. Wine rack

A wine rack made from remnants of medium-diameter plastic pipes is a great idea for storing wine at home.

13. Laundry basket

An original, roomy and very practical laundry basket, which can be made from thin plastic pipes and durable fabric.

14. House

Please the kids by making a cozy house for them out of plastic pipes and unnecessary matter.

15. Garage

Homemade football goal.
So that children do not get bored in the country, you need to carefully consider their leisure time. For example, to build small football goals from plastic pipes and mesh and teach the kids to play football.

Either from a desire to save money, or from an overabundance of imagination, our people have learned to benefit from those objects and things that a pedantic European would have sent to a landfill long ago. Greenhouses are built and palm trees are made, cute garden figurines are made of, and any garden furniture can be assembled from. Scraps of plastic pipes left after repair can also be used to good use. They make the simplest decorative things, beds, chairs and even greenhouses - there is a huge scope for imagination, and we have collected only the most interesting ideas for crafts from plastic pipes that can serve as a guide to action or a source of inspiration.

Pipe connection methods

Plastic pipes are like designer parts. By combining segments of different lengths and connecting them at different angles, you can get anything: a beginner will be glad that he built the simplest hanger, and a professional will easily assemble a bunk bed. The main thing is to be able to connect the pipes correctly, and then it will be possible to do any thing necessary in the household.

Plastic pipes are a collective name, and which are made from polymers. The greatest demand is and. Segments of different lengths and diameters remain after the repair of engineering networks in an apartment or in a country house, and, as a rule, they are cluttered in pantries, or rather cluttered, until enterprising craftsmen began to use them for other than their intended purpose. Plastic pipes are characterized by low weight, high strength and durability, they are easy to maintain and safe.

Polypropylene pipes are connected using a special welding machine. It is expensive - it is more profitable to rent it, and it will take a little time to learn how to work with it. You can use compression fittings to connect. In any case, the assembled product will be non-separable.

When it comes to plastic pipe crafts, usually refers to PVC pipes, which can connect with each other in the following ways:

• socket connection with rubber seal. Manufacturers supply socket pipes with a rubber seal located at the end, thanks to which pipe connection work is carried out simply and quickly, and the joint is sealed. At the first stage, the socket of one pipe and the smooth part of the other are cleaned of dust and dirt. A chamfer is removed from the smooth end of the pipe (an angle of 15 degrees, chamfering cutters can be used) and a mark is applied indicating the depth to which the pipe will enter the socket. The sealing ring of the socket and the smooth part of the pipe are lubricated with a silicone compound and inserted one part into the other, focusing on the mark. For plumbing and sewerage, this is a good connection, but if you are assembling shelves or furniture, then it is not rigid enough. The main advantages: simplicity and the possibility of dismantling, therefore, such a connection is used for the construction of temporary buildings and things;
  
• adhesive connection. The ends of the pipes to be connected are chamfered (some just sand the surface), then marks are made indicating the depth of the fitting. The ends of the pipes are degreased with methylene chloride, then the adhesive is applied with a brush to the pipe and inside the chamfer or socket. The pipe is inserted into the fitting (or socket), rotated ¼ turn for better distribution of the adhesive, then the elements can be pressed for 30-60 seconds. It is desirable to carry out all work quickly. The remaining glue is immediately removed, and the connection is allowed to dry for several hours. The process is more laborious, but the joint is more reliable;
  
• flange connection. Separate sections are connected using special fittings. Before performing work, the ends of the pipes are cleaned. A flange is put on the cut, then a rubber gasket, onto which the flange is pushed. The elements are connected by means of bolts with a counter flange. Then the bolts are evenly tightened, due to which the alignment of the flanges is achieved. The connection is reliable, the design is collapsible.
  

When the technology for connecting plastic pipes has been mastered, we can assume that almost any craft can be done. It is only important to draw a sketch in advance or make a drawing, and correctly calculate the length of all segments. You can build anything from such parts - we will list only some ideas for crafts from plastic pipes with our own hands.

No. 1. Organizer

The most unpretentious way to use the remains of plastic pipes. You can take pipes of small and medium diameter, even segments of small length will fit. The first option is a mobile organizer. It is enough to cut segments of different heights and glue them together in an arbitrary order or following some pattern (for example, one higher segment in the center, the rest around it). Such a stand is suitable for storing office supplies near the desktop or for organizing all kinds of bolts and other fasteners in the workshop.

The second option is stationary. On the one hand, the pipe must be cut at an angle (the most popular option is 45 degrees, but it can be less if small elements are stored). Then the cut elements are attached to a vertical surface using. You can mount the organizer elements on a wall or a specially installed board.

No. 2. Decorative frame or partition

Thin rings, which are easy to obtain when cutting plastic pipes, are a versatile material for creating decor. You can use pipes of different diameters - it's even more interesting. Plastic rings make a wonderful frame. It is enough to draw a layout of the future product on paper in advance and glue individual rings directly on it. From them you can get both a strict symmetrical pattern, and something chaotic. If you then paint it, then such a frame for a mirror or a picture can hardly be called a simple craft - it will be a cool designer thing.

Similarly, you can get a decorative partition. Gluing, of course, will take a little longer, but the effort is worth it. The partition will look very interesting, weigh a little and come in handy, for example, to delimit zones in the bathroom.

No. 3. Shoe rack and wine bottle holder

There are a lot of options to organize the storage of clothes using plastic pipes, and all these crafts are quite simple to implement.

No. 8. Rack for living room, hallway, pantry

By connecting several pipe sections in the required order, you can get a practical and inexpensive rack that will fully satisfy your needs in terms of size, shape and configuration. It can be both quite modest in size, and a real giant. If the rack is located in the living room, then the pipes can be painted, and glass or plywood can be used as countertops. When it comes to or a workshop, there is no particular need for decoration.

No. 9. Football goal

If the summer cottage has, then you can build a small football goal. Only a few connections will need to be made, but before that, of course, everything will have to be carefully calculated and measured. When the frame is ready, a mesh is put on it, and the gate is ready. When the kids grow up, the product can be disassembled, and the pipes can be reused to create other crafts.

Similarly, you can make a small children's playhouse. We all once loved to build huts, gather there with a company and play. It was especially cozy and mysterious. The frame for the house of pipes is made elementary. Children will only have to throw a thick fabric over it and enjoy their own little castle.

No. 10. Arena for children

There is nothing complicated in the design of the playpen. However, the finished product in the store is not cheap. A budget alternative is available to those who have a decent amount of plastic pipes in stock, the time and desire to learn how to connect individual segments into a single structure. For manufacturing, you will need a lot of pipes, so home craftsmen advise you to just buy them in a store - it will still turn out cheaper than a ready-made arena, and the pipes can then be reused.

After the arena scheme has been created with an indication of its dimensions, pipes are cut. Vertical partitions are interconnected by short horizontal sections of pipes at the top and bottom. However, variations are possible in the design of the arena.

No. 11. Chairs made of plastic pipes

Here you will need already confident skills in connecting individual pipe sections. Depending on your desire and degree of preparation, you can make a simple children's stool, as well as a comfortable chair for adults, or even an armchair. After the frame is ready, the seat is made. It can be woven from thread, rope, or use a dense fabric. Then you can put soft pillows on top. Having mastered the manufacturing technique, it will be possible to build almost all the furniture for a summer residence.

No. 12. bunk bed

Yes, it is quite possible to assemble a frame for from ordinary plastic pipes. Not only supporting elements are made of pipes, but also a ladder, and, of course, lamellas under. The level of complexity here is increased, it is better to take up the work for those who have already tried their hand at making simpler crafts. Do not neglect drawing up a drawing and scrupulous measurements.

A bed made in this way will be a real godsend for a country house of a small area, because not everyone can afford to buy a ready-made bunk bed for the dacha, but somehow it is necessary to solve the placement problem.

No. 13. garden arch

How beautiful the arches entwined with plants and flowers look in the garden. The main difficulty in making a garden arch from plastic pipes is that individual segments will have to be bent. The easiest way to give the necessary shape to the pipes is with a gas burner. A separate section is heated to a state where the material will succumb to deformation, then it is given the necessary shape. Someone decides not to bother and just connect several pipe sections at an angle. Then the upper part of the arch will resemble a trapezoid or a polygon in shape. Between the two arched vaults, horizontal elements are attached so that in the future the arch will be as much as possible covered with greenery. Do not forget to securely fix the structure in the soil.

No. 14. Alcove

Building with plastic pipes is much easier than anyone can imagine. If you take long enough segments, then you don’t even have to connect anything. Two pipes of the required length are arched and fixed to the ground. The distance between the elements of the future frame should be such that a dining table or other items fit. It remains only, and everything is ready.

The design of the gazebo may be slightly different, resembling a house in shape. In this case, you will have to connect individual elements.

No. 15. carport

The design itself is simple, but the difficulties can be associated with a decent size of the canopy, because it must be wide and high enough so that the car can safely hide under it. The frame is assembled with special care, fastened to the ground and to the adjacent wall, if any, covered with a dense awning fabric on top, which will protect the car from the scorching sun and rain. To call this product a handicraft, even the tongue does not turn - this is already a small architectural form.

No. 16. Greenhouse

A small greenhouse is done elementarily. You will need a few pipes, there will also not be very many connections. After the frame is assembled and fixed in the ground, it remains only to cover it with agrofibre. It will be possible to make such a greenhouse in just a couple of hours, and the benefits from it will be huge.

No. 17. Greenhouse made of plastic pipes

A full-fledged build, of course, is more difficult than a greenhouse. It will take a lot more material, and it will take a lot of time. The size of the greenhouse can be almost any. The procedure is as follows:

From pipes, you can make a frame for a greenhouse of almost any shape, but the arched one remains the most preferable.

No. 18. seedling containers

If in the country every square meter counts, then it's time to implement the idea of ​​​​vertical gardens. Thus, it is convenient to grow greens and some berries. Scraps of plastic sewer pipes will make excellent containers if you cut holes in them in advance for seedlings and the outflow of excess water. It remains only to fill the soil containers and place the vertical beds one above the other. You can attach them again to the stand of plastic pipes. Some connect the beds with ropes and hang them from the wall - there are many options.

PVC tubes have proven themselves very well not only in the plumbing business, but also in the summer cottage. In today's compilation, I want to offer you 27 handy craft ideas that will make your summer cottage life easier. For example, in the first photo there is a convenient greenhouse frame, a thick tube is inserted into the base, we insert thinner pipes, we stretch the agrofibre from above.

Lightweight pvc summer tent canopy

The idea behind a simple easy to assemble and dismantle sun canopy that can be folded out in a few minutes. Two arcs on which the awning fabric is stretched, and a transverse pipe - a spacer. And now you can sit in the shade or hide from the summer rain.

Deep watering in drought

In the heat, it is sometimes pointless to water the plants from above, as the moisture simply does not reach the deep roots. By mounting a PVC pipe with drilled holes next to a tree or plant, you will deliver life-giving moisture directly to the roots.

PVC pipe tool holders

Here is such a simple device that will help you always keep your tool in an upright position, convenient for use, you can easily pull out a rake, fork or shovel without experiencing any inconvenience.

Garden bed with arcs of pvc pipes

A convenient greenhouse bed, pvc arcs are inserted into holders wider in diameter, screwed to the corners of the wooden frame of the bed. A convenient spring version of a light greenhouse for greenery.

PVC pipe greenhouse idea

However, not only a greenhouse, but even a greenhouse can be made with your own hands from pvc. Using fittings, you can give the greenhouse the desired shape, connect all the elements of the frame together.

Comfortable chairs for weeding from pvc pipes

Often, gardening requires a long stay in a bent position, so for weeding, for example, such a chair will be very useful. Sizes and heights can be customized.

PVC pipe chicken feeder

Your chickens will always be able to get food, even in your absence in the country, if you make such long-term feeders. Having poured food into the cavity of the pipe, you can easily leave for the city on business, even for several days, without fear that your pets will remain hungry.

Device for planting seeds

You can plant seeds without even bending over, if you make such an original seeder from a pvc pipe. Please note that the seeder has another plus - it is in increments, that is, when planting a seed, you automatically mark the location of the next seat.

Feeder - milking for a goat

With this device, you can milk your goat and feed it. The height of the podium is such that you can milk without bending over, just sitting on a chair.

PVC pipe aviary

The original aviary for your chickens for the period of summer maintenance. From time to time, the aviary can be moved from place to place so that the bird always has green grass.

Hose holder

Convenient holder for a country hose. The device can be both stationary and mobile, with wheels for transporting the hose around the site.

Tomato holders

A frame that supports the trunks of a tomato will be a good option for those who grow tomatoes in the open field.

Cucumber trellises made of pvc pipes

And this is already a variant of trellises for cucumbers growing in the garden.

And here is another version of the trellis that will support the lashes of cucumbers.

Turret for growing strawberries

There is a method of growing strawberries in turrets made of pvc pipes covered with earth, with holes in which strawberry rosettes are planted.

Pencil case for country trifles

So that all sorts of little things are not lost and are always in one place, make a case for them from a pvc pipe with a screw cap.

Greenhouse for beds and flower beds

Such a mobile greenhouse can be used to protect young plantings from night frosts. For a day, you can remove it to the beds, or open only the upper part.

Holder for small things

The original idea of ​​​​a holder for all sorts of country trifles. From short pieces of pvc pipes, you can make a stylish design in which small belongings will be perfectly stored.

Rack made of pvc pipes for giving

PVC pipes can also serve you as the basis for a country rack. Shelves can be made from both wood and chipboard blanks.

country car

Some homemade products are so original that it's time to give them an award for originality and convenience. In such a cart, you can transport hay, compost, bags, some country goods.

Drinker for chickens

The idea of ​​a drinking bowl for poultry from pvc pipes. Nipples for drinking bowls can be ordered on Aliexpress, where they cost a penny, unlike stores.

Shelving for boxes in the pantry

A spacious rack for storing boxes with things can be made for both the garage and the utility block.

Drip irrigation system for pvc pipes

The photo shows the idea of ​​​​a drip irrigation system for a summer residence. You can choose the required cell size, or distribute the pipes in parallel, including flexible hoses from droppers in the system.

Bird feeders

Original bird feeder made of thick pvc pipe. The principle of the feeder is such that the feed can be filled for a long time and the birds will always have the opportunity to eat at a convenient time.

Carved pvc pipe lamp

A very beautiful idea is to make a solar-powered lamp out of carved pvc pipes. In the evening, the lamp will illuminate the space of the pipe from the inside, and we will observe the floral pattern.

seedling grower

The idea of ​​this seedling sprouter is that there is water with nutrients in the pipe.

Roof and tray cleaner

By connecting the hose to a PVC pipe extension, you can wash the roof, clean the water drain chute, etc.

And in winter, you can use a pvc pole to clean the roof from snow.

That's all I have for today! I hope that these pvc pipe craft ideas for your dacha and private house will help you in your household!

Polypropylene pipes are made from polymers, that is, one of the varieties of plastics. Although the material is lightweight, it has a margin of safety. If pipes are used to transport hot liquids, then their service life is on average 50 years. When working with cold filling, the service life increases to 100 years. Polypropylene pipes are used in water supply, sewerage, watering and irrigation, heating, and even for transporting combustible gases, to which the plastic is chemically resistant. Polypropylene pipes are widely used for various types of laying: external, along walls, internal. However, this material can be used not only for its intended purpose. The range of application has increased significantly, due to creative crafts made from polypropylene pipes, which are now full of sites of jacks of all trades. Let's talk about what products for home and garden can be made from this durable, but relatively inexpensive material.

Advantages and properties of pipes

Polypropylene has the lowest density of all plastics. However, this property cannot be attributed to disadvantages, since its indicators are sufficient for working with liquids and gases. The material is characterized by low moisture absorption and the ability to work in extreme conditions (both at low and at high temperatures). Polypropylene has a low rate of flexibility, again compared to other plastics. The material is characterized by high resistance to cracking, but only at constant temperatures. If sharp drops are observed, then the probability of damage to the polypropylene pipe increases dramatically.

The material has electrical insulation and resistance to a whole list of chemically active substances. Only some reagents are able to destroy polypropylene, but only under certain conditions (temperature, humidity), which are difficult to recreate. This type of plastic boasts a long service life, as mentioned above. However, when the maximum allowable operating temperature is exceeded, the material begins to melt and ceases to withstand pressure. In this situation, the service life is rapidly reduced. Just one temperature jump is enough. Of course, this rule is more suitable for pipelines. It is unlikely that crafts will be placed in an extreme environment and subjected to such tests.

Among other things, if you buy polypropylene from a reliable manufacturer, you can guarantee its environmental friendliness. Crafts made from this type of plastic are not subject to corrosion, which has become a real scourge for metals, and are perfect for both home decoration and decorating the site. Due to the low weight of the pipes, the product is easy to move, and using the type of fastening with bolts, it is just as easy to dismantle and reassemble it in a different form.

Polypropylene during general cleaning can be washed with ordinary soapy water. The rest of the time it is enough to wipe it with a damp cloth once a week, like any other surface.

Pipe connection methods

Connect pieces of pipes made of polypropylene using diffusion welding. Although there are a lot of methods for fastening two parts, the rest are not able to provide a reliable connection:

• Compression joint. The pipe is compressed, which over time will necessarily lead to deformation and leakage.
• Thread. The weak side of the technique when using polypropylene pipes is the mechanical strength of the connection.
• Press connection. It is sometimes used for polypropylene pipes, but the rubber seal can change its position, which will lead to a leak in the connection. Here we are talking about external loads on the pipeline.

The only reliable option is heating polypropylene to a certain temperature by welding, followed by cooling and "sealing" the joint. Of course, this method is applicable to pipelines that are used to transport gases, chemically aggressive substances or water of different temperatures. In our case, we are talking about crafts. Pipes are not used for their intended purpose, so you can, as an exception, use any other technique or use glue and even bolts.
In the pipeline, as a rule, each fragment is fastened tightly, that is, without counting on subsequent disassembly. For connection, fittings are used - special parts that are used in the assembly of the pipeline and provide a hermetic fixation of two fragments of the system. For polypropylene pipes, the same fittings are suitable as for metal products. They are made of various materials (brass, bronze, cast iron, brass, steel, polyvinyl chloride, polypropylene). Depending on the form and purpose, fittings are classified into the following groups:

• Caps and plugs. Used to plug the end of a "blind" pipe.
• Fittings. Connect pipes with flexible bends (hoses).
• Crosses and tees (collectors). As the name implies, they are used to branch one pipe into several streams.
• Adapters. Allow to connect pipes of different diameters.
• Leads and corners. They are used for "turns" and changing the angle of inclination of the pipe.
• Couplings and barrels. Extend pipes in a straight line. This type of fitting is the most commonly used. They allow you to locally replace a piece of pipeline without affecting the entire system.

Depending on the complexity of the craft, one or another set of fittings will be required. The shape of the future product must be thought out in advance in order to purchase suitable connecting parts.

For home/apartment

The range of products made of polypropylene pipes for the home is very extensive. From the material you can make both compact organizers for the desktop or shelves, coasters, as well as large-sized pieces of furniture. The material can be selected by color or you can paint the craft in your favorite shade after manufacturing. Polypropylene pipes, the surface of which is decorated with decorative painting, will look stylish and unusual. To cover the material with patterns or ornaments, you can use special stencils. From the variety of paints, it is better to choose resistant to moisture, for example, acrylic is suitable. Consider a series of master classes on creating simple, but necessary things in the house from polypropylene pipes with your own hands.

Organizer

Organizers were originally called notebooks for important daily records. Now this word has acquired several new meanings. We are interested in a desktop or wall fixture for distributing writing utensils, that is, a product in which pens, scissors, paper clips, paper clips, sharpeners, buttons and other little things necessary for work can be laid out in sections. Organizers are widely used not only in offices, but also in home workshops. For example, doing needlework is also associated with the use of a large number of small tools and parts that it is desirable to lay out in their places. There are two types of organizers:

• Desktop.
• Wall.

The former are used if there is enough space on the table to place them. The latter are suitable for distributing a large number of small items. For the manufacture of the organizer, only the tubes themselves, fasteners for connecting them into a single structure and any dense material from which the bottom of each section is made will be required. You can use plastic trim. The tubes are cut into fragments of the desired length. Then they are connected to each other on the sides and the bottom is glued to the structure. If the organizer will be attached to the wall, then the upper edges of the pipes are usually cut at an angle for ease of use. Instead of the bottom, in this case, a board or a piece of plywood is used.

Some make an organizer for wires from a pipe. Holes are drilled in it through which they will go into the room. All the "disgrace" from the ball of wires is hidden inside the pipe, thereby not affecting the aesthetics of the interior of the room.

Decorative frame or partition

Decorative frames and partitions made of polypropylene pipes are made according to the same principle. For work you will need:

• Adhesive composition.
• The tubes themselves.

They need to be cut into numerous "rings". You can also use a regular knife, since polypropylene is a rather soft material, but it is better to purchase special scissors specifically for plastic. Other devices can disfigure the edges of the pipe with notches. After the required number of rings is ready, they are connected by the sides with glue to each other. Fragments of different diameters will look original. In this case, the illusion of soap bubbles in 2D is created. From the rings form a frame for a photo or a partition in the room. By the way, such a screen will compete with designer products. It looks fresh, original, airy and incredibly aesthetically pleasing. To complement the zoning element of the space of the room, you can use decorative lighting, which will be in harmony with the white product.

shoe shelf

Shoe shelves made of polypropylene pipes, as a rule, are made in the form of a honeycomb. The material is cut into fragments of the same length. Then they are connected to each other with glue. The shelf is formed from rows of scraps, where each subsequent fragment "lies" on the gap between the two previous ones located below. The form of such a shelf can be given the most diverse. One of its main advantages is the versatility of the configuration. By adding or removing tube sections, you can choose the perfect shape for the hallway, in which the furniture is already located, and where it is difficult to put a full-fledged shelf. Some craftsmen combine the shoe storage system with cabinets or hangers so that the design blends seamlessly into the overall composition. For such shelves, only pipes of large diameter are suitable.

Before starting work, you need to try on. It is enough to put a pair of slippers or boots into the hollow part of the pipe. You can also make a shoe rack using boards as crossbars. The tubes in this case will become lateral supports. They can be styled retro and painted with silver paint, and the surface of the fittings can be covered with a bronze composition.

Wine bottle holder and glass holder

A stand for wine bottles from polypropylene pipes can be made, like a shoe shelf in the form of "honeycombs", but using fragments of a smaller diameter. They are also selected individually, trying on bottles. For the “tree” design, tubes of small diameter are suitable. A complex composition is assembled from them with a central "trunk" and side branch branches. At the end of each, a coupling fitting is fixed, with a diameter suitable for the neck of the bottle. The glass containers are then inserted into these holders. Wine "tree" can be decorated in steampunk, retro, eco style. For minimalism, you can use one piece of pipe, in which holes are cut out for the necks on the side. The fragment is fixed with self-tapping screws on the wall (it can be tilted) and bottles are also inserted into it with their necks down.

To make a hanging or wall-mounted glass holder, one piece of pipe is also enough. Along the entire length, an incision is made on it as wide as the diameter of the stem of the glass. Then the product is fixed on the wall or bar counter. Glasses are threaded with legs through an incision. The wide bottom will not allow the glass container to fall. On such a rack it is convenient not only to store glasses, but also to dry them after washing.

Vases and flower pots

Pots for large indoor plants can be made from large diameter polypropylene pipes. For the bottom, it is better to use a denser type of plastic. For small green spaces, small-diameter tubes are suitable, which are grouped into a single composition. From above they are cut at an angle, then painted green. It turns out a design that vaguely resembles bamboo thickets. A pot for ornamental grass, cereals or seedlings is made from pipes and plugs. Fragments are arranged horizontally. In each, a piece is cut out in the middle or along the entire length, leaving only small “walls” on the sides. Then, a plug is attached to the pipe trim, soil is poured and plants are planted. Such pots, as a rule, are fixed on the walls. So they save space and do not interfere.

Nursery furniture and more

As mentioned above, full-fledged furniture can be made from polypropylene pipes. If it is properly decorated, then such an item will not look like a homemade garden product that accidentally ended up in the house. The list of pieces of furniture that can be made from pipes is quite impressive:

• Tables and coffee tables.
• Chairs and armchairs.
• Racks, shelves and cabinets for household items, shoes and clothes.
• Hangers and dryers.
• Children's beds (including bunk beds) and playpens for babies.

Shelves and stands

Consider the process of manufacturing storage systems using the example of a bookshelf. For such furniture, you can only get by with pipes, or additionally use boards or cut pieces of MDF, chipboard. In this case, the content that will be placed on the shelf matters. Books, for example, can be freely laid out on an “empty” shelf without a crossbar if its width is less than the width of the publication. And the filling will not fall. By the same principle, you can make shelves and holders for shoes, magazines, dishes, caps, bottles, cups, cutting boards, magazines, CDs. This option is not suitable for those shelves on which filling of different shapes and sizes will be placed. Here you will already have to use crossbars from another material, which will be fixed on the "sides" of the tubes. Corner shelves for books will look stylish and unusual. For their manufacture, pipes, plugs, bends and corners are required. The holder is assembled from fragments, placing them in U-shaped zigzags. When the shelf is ready and fixed, the books will stay on it by relying on the pipe itself and the wall. The shelf is ideal for loft-style interiors.

To make a coffee table, you will need small diameter tubes, fittings and a countertop. The glass cover will look stylish. The tube system will play the role of a support. They can be connected to each other according to the standard scheme, like four legs, or you can connect your imagination and decorate the supporting part of the table with intricate tubes decorated with various fittings.

Clothes hanger and dryer

Assembling a hanger or clothes dryer starts from the base. You will need four tubes for the legs. They are connected to each other with tee fittings. A crossbar tube is inserted into the side branch, which will increase the stability of the product, and two racks into the top branch. Plugs are put on the legs so that dust and dirt do not get inside. Additionally, the side racks can also be fixed at the top with another crossbar, again using a tee fitting. "Hooks" are made from the same parts. The top bar is completely assembled from T-fittings with caps.

Rack for living room, hallway, pantry

In the racks of polypropylene pipes, a base structure is made, which is subsequently supplemented with wooden shelves. Furniture as a result will turn out to be not bulky, relatively light, but at the same time durable and resistant to heavy weight loads. Since the material is insensitive to aggressive microclimates, it is versatile. Such racks can be used in the kitchen, bathroom, living room, hallway, nursery and pantry with pickles. Since the loads on the furniture will be quite large, polypropylene pipes cannot be interconnected using bolts or adhesives. In this case, it is better to resort to diffusion welding, which will ensure a reliable connection of the fragments.

Arena for children

The playpen for babies is necessary if the mother plans to do household chores when the child is at hand. This design will protect the little person, but it will not limit his movements. Manege is easy to make from polypropylene tubes. For work you will need:

• Fittings-tees and eight corners.
• Tubes of small diameter.
• Scissors for cutting polypropylene.

Manege is assembled very simply:

• First, the tubes are cut into fragments of the desired length (small horizontal and long vertical "rods").
• Then, T-shaped fittings are put on each twig on both sides.
• On the sides, short tubes are inserted into the connecting parts, two on each side.
• Now they are again put on T-shaped fittings, which are connected below and above with the next twig.

Then the wall of twigs is “wrapped” 90 degrees with the help of corners.

The bunk bed is assembled entirely from tubes and fittings. The bed itself, where the mattress will lie, is reinforced with short tubes, which are often placed from side to side. It is easy to make a neat ladder from the material. If the bed is for boys, then even a small horizontal bar for exercise in the morning can be attached to it. For one child, a workplace is being arranged from below. To do this, it is enough to assemble additional supports under the countertop from the tubes. If the baby is still quite a crumb, then the bed is decorated with high sides.

For country house and garden

Plastic is a universal material, products from which can decorate not only the house, but also the territory adjacent to it. For the improvement of the garden plot, light, mobile furniture, special stands for flowers and plants, greenhouses, pet feeders, greenhouses, pots for seedlings are needed. In the play and recreation area, it is also necessary to put a couple of special structures: football goals, gazebos, pergolas and decorative arches. For outdoor enthusiasts, you will need a separate place for parking bicycles. An excellent replacement for a full-fledged garage, for the construction of which there is no time or money, will be a summer carport that will protect the car from rain. All this can be done from one material - polypropylene tubes. About how exactly, and we'll talk further.

For the manufacture of football goals, you will need tubes, mesh, fittings (corners, plugs, tees). Start work from the ground up. It will be U-shaped. First, the widest crossbar is assembled from three short fragments. They are fixed with T-shaped parts. Then three fragments of the tube (two short sides and a wide middle) are interconnected using corners. The same fittings are put on the ends of the "P", but with branches pointing upwards. Now they make exactly the same design. It is connected to its "twin" through the branches of the corners, which were directed upwards, and with the help of two crossbars inserted into the T-shaped fittings. Finish the job by stretching the mesh.

Garden furniture made of plastic pipes

Chairs, deck chairs, tables, benches, deck chairs are made from polypropylene tubes. It is better to choose a white material that can be easily combined with wood, metal and textiles of any shades. In addition, a neutral tone will make the furniture airy and give a touch of freshness. Sun loungers, deck chairs, chairs can be made according to two principles:

• Strengthen the seating area with frequently spaced cross tubes.
• Use a stretch fabric that will allow the seat to sag slightly.

In the first case, you will have to use special mattresses or linings to sit softer. Products in which polypropylene is combined with wood look great. Tables and low tables are assembled using the same technology as similar home furniture. The only difference is in the material for the countertop. If a coffee table with a glass cover in the house looks appropriate, then for the street it is better to use more durable and less easily soiled materials (plastic, wood, metal).

garden arch

Polypropylene tubes have sufficient plasticity so that a semicircular arch can be formed from them. The simplest example of the product consists of two rows of supports that flow smoothly into the top crossbar, connected to each other by horizontal trimmings using T-shaped fittings. In order for the arch to cover most of the garden path, additional rows of supports are attached to it, as if stretching the structure along. The arch will be a great support for weaving roses, grapes, clematis, ivy and hops. Two years is enough for the branches to densely cover the tube structure, leaving only small gaps for sunlight. For more complex designs, tubes of various lengths are used. Their intersections and connections adorn the walls of the arch.

For a gazebo, a frame base is made from polypropylene pipes. Designs can be given a simple square or classic round shape. The roof is covered with polycarbonate, waterproof fabric or thin wooden slats. For a patio, a roof is not needed, but on the sides of the “wall” gazebos are created from fluttering curtains, which, if necessary, provide the necessary privacy. If the master has an impressive stock of polypropylene tubes and fittings (plugs, crosses, tees), then the side partitions can be made from them in the form of a frequent lattice (classic or at an angle of 90 degrees).

A carport is assembled according to the same principle as a gazebo. In simpler versions, the roof is stretched from waterproof material (as for tents) and this is limited. If there is time and money, then the parking space can be sheathed with polycarbonate sheets on top and sides. Thus, the car will be protected from rain and wind, which will even allow you to work on car repairs in bad weather.

Bicycle parking spaces

A small parking lot for bicycles is assembled from polypropylene tubes of small diameter. First you need to form a grid. Between its rods leave the gaps necessary to accommodate the bicycle wheel. A T-shaped fitting is fixed on each crossbar, with the help of which the stand-holder will be fixed in the future. It is assembled from short pieces of pipes and similar fittings. Subsequently, one end of short tubes is threaded into them, which are fixed to the “lattice” with the second ends. As a result, the two planes will intersect at right angles, and the whole structure will stand firmly on the ground.

Greenhouse - the most simplified design, covered with a film, which is designed for growing seedlings. They are used only in early spring, when the ambient temperature has not yet risen to the desired values, and growing weak shoots on the street without special barriers is too dangerous. Greenhouses are considered temporary structures. Unlike greenhouses, they do not have windows or doors. To build a small greenhouse, a set of tubes for the base, for semi-circular bars, T-shaped fittings and corners is enough. The structure is assembled from several "arches", on which a transparent film will subsequently be fixed with the help of special plastic clips. You can get into the greenhouse only by removing the protective sheet.

Greenhouse and greenhouse made of plastic pipes

A greenhouse made of polypropylene tubes is a more “serious” and bulky structure than a primitive greenhouse. As a rule, special soil is brought into it, high beds are equipped, the walls are equipped with windows that open when ventilation is necessary, and a full-fledged door is provided that closes with a latch. Since the structure is more monumental, it is usually covered not with a thin film, but with polycarbonate sheets, which are fixed on a “skeleton” made of polypropylene tubes. The shape of the greenhouse can be both classic semicircular and square, rectangular. Assemble the structure according to the principle of assembling arbors. Inside, it is usually equipped with special shelves made of the same tubes, which will later play the role of stands for long pots with seedlings and further strengthen the structure.

Some craftsmen make complex structures in which static segments alternate with mobile ones. The latter are equipped with special handles and rise up to ventilate the greenhouse. The need for windows for such a structure is eliminated.

seedling containers

To make containers for seedlings, you will need pipe trimmings, plugs and plastic scissors. First, two longitudinal and two transverse incisions are made in each fragment. The resulting rectangle of polypropylene is removed from the tube. The sides of the fragment are closed with plugs. The pipe is placed horizontally. Fill it with soil and plant plants. For such pots, a “step-ladder-stand” is made. Its "steps" are interconnected by additional crossbars, on which tubes with seedlings are placed in a row.

Feeder for chickens

Tube chicken feeders can be built in two ways:

• Make a simple horizontal structure with several sections, like pots with seedlings.
• Make a vertical feeder from several pipes. It takes up less space but stores a lot of food.

The second structure is fixed on the wall with brackets at such a height that the chickens freely reach the grain. From above, the feeder is equipped with a lid that will protect feed supplies from dust and moisture. The height of the pipe is selected individually according to the height of the person who will fill the grain (approximately at the level of his chest).

You can make an unusual wall Christmas tree out of polypropylene pipes if you don’t have an artificial beauty team at hand, and the chimes are about to strike midnight. They collect a tree from the "rings" into which the tubes are cut. They are connected to each other, giving the shape of a Christmas tree. It is better to use tubes of different diameters. Each ring is painted in a certain shade. To add a festive touch to the craft, it is additionally covered with glitter. Each "ring" is invested with a New Year's toy. Some can include miniature gifts. By the way, in this way it is easy to “hide” presents from children, and turn their search into an exciting game. A New Year's wreath on the front door is also collected from "rings". To make the decoration catch the eye of passers-by and guests, it is decorated according to the principle of contrasts. For example, only white rings are used, in which bright Christmas balls and toys are selectively placed within one or two shades.

Game complex for cats

The play complex for cats is assembled from tubes and plastic crossbars. After the construction is made, each detail is covered with a dense fabric or a rigid cord, which will subsequently be used as a scratching post. The complexity of the design depends on the patience of the owners and the activity of the pet. You can build a simple house with a horizontal ladder, a sunbed and hanging toys. Some do not stop there and assemble real cat palaces with “hammocks”, a complex transition system, “booths” and running wheels, like hamsters in cages.

As it has already become clear, polypropylene pipes have so many applications that it is even difficult to squeeze their list into the framework of one article. This material is somewhat reminiscent of a designer: the master has a set of parts that can be fastened with connecting elements, as your heart desires. Therefore, it is easy to obtain from pipes both a simple construction, the laconism of which borders on primitivism, and a complex composition with ornate interweaving of individual fragments.

Creative owners will always find original uses for ordinary things. It is not often possible to find crafts made from plastic pipes, but it is this material that gives scope for imagination and often saves the situation in a seemingly hopeless situation. Easily bent, easily cut, quickly mounted pieces of plastic pipes can be turned into the most unexpected design. These can be DIY crafts made from polypropylene pipes, such as a flower stand, a bush holder, a bookcase, a rack, decorative decorations for the home or garden, and even a plastic pipe fence or a pipe chair.

To obtain bent or flattened structures from polypropylene pipes, the material is heated, and while the pipe is hot, it is deformed in the right places and directions. It is very convenient to heat pvc pipe sections with a gas burner, but an ordinary gas stove is also suitable. They cut the details of water plastic pipes with a hacksaw, grinder or jigsaw - manual or electric. Advanced home craftsmen connect homemade pvc pipes with a special soldering iron, and a synthetic adhesive is also suitable for simpler bonding.

What can be made from plastic pipes

If desired, and with a good imagination, crafts for giving from plastic pipes can take up a significant part of your household, both in the house and in the garden or in the garage. Products of different sizes and diameters can be bought at any construction market: their usual purpose is water and sewer lines, heating and irrigation systems, and it often happens that after the main work pieces of polypropylene pipes of different lengths and diameters remain. If you haven’t thrown them away yet, then you can make very original and even useful crafts from plastic pipes with your own hands.

For the manufacture of artistic items, segments of polypropylene pipes are best suited - they are rigid, they can be easily connected to each other using nozzles and adapters, so that the structure can later be disassembled. Trimmings will also serve well for a summer cottage or a playground, a children's room or an auto repair shop. The main thing is to see how they can be used. Polypropylene products are well connected by soldering: a non-separable, but very strong and durable construction is obtained.

Connection options

You can make plastic pipes with your own hands not only for crafts for summer cottages, household items or furniture, but also for more complex designs. The main thing is to firmly connect the parts of the product. Connect them in the following ways:

1. One segment is inserted into the socket of the other through a rubber seal;
2. Blanks of plastic pipes are connected with glue;
3. Details are connected to threaded hardware.

The first option is the simplest, but not reliable and tough enough. Contact surfaces must first be cleaned of dust and lubricated with silicone or graphite grease (you can even use soapy water or liquid detergent). The segment is inserted into the socket to the end, and then pushed back a few millimeters.

This design of water pipes can be easily disassembled, so it is suitable for seasonal use: this is how you can make children's swings, chairs, water pipes for the garden, etc.

The second option is more reliable, but more labor-intensive. Before gluing sewer plastic pipe trimmings, the joints are also cleaned, sanded with fine sanding paper and degreased with a solvent or methylene chloride. Glue is applied to the entire outer surface, and to 60% of the inner surface of the parts to be glued together. Then the products are inserted into the socket and rotated 90 0. Methylene chloride dries quickly - 60 seconds, so gluing must be done quickly.

The third option is to mark the products and drill holes for the bolts. Such DIY pipe crafts are considered the most reliable, and they can always be disassembled for storage or rework.

To connect the corners of structures or several segments in one place, fittings are used - tees, adapters, couplings. Therefore, structures of any complexity can be made from PVC or propylene pipes. Consider crafts for children and adults that you can make with your own hands from pvc pipes.

Little things for the interior

1. From scraps of products, you can design an organizer for an office or workshop. The reliability of crafts is determined by the connection options: self-tapping screws to the surface of a table or wall, or gluing structural parts together. The first option will be stationary, the second - mobile (portable). It is better to take pipelines of white or gray color;



2. From plastic pieces of small diameter you get a beautiful and original stand for a tablet or netbook;



3. What else can be done from pipes? For example, modern or high-tech book shelves, photo frames or mirrors;



4. From scraps of large diameter you get a shoe shelf with compartments, from pieces with a smaller diameter - a flower stand. In order to make flower pots with your own hands, you will need products of a very large diameter - from 100 mm and above. Such country crafts made of polypropylene pipes can be placed both in the house and on the street; Usually these are sewer elements;



5. A floor vase of any length, decorated with any patterns, can even serve as a gift to a friend. To make a vase, take pipes for plumbing or sewerage systems of medium diameter, and you can make such a type-setting vase - insert cuts one into one, using each next segment of a smaller diameter;



6. An indoor or outdoor spotlight with a minimum of decorations will perfectly fit into a techno-style interior;



7. A hanger, a holder for things, a chair or a table, a rack, a shelf, a bookcase, a shower, a watering can - there are so many ideas for a country house that you won’t remember everything, it would be a fantasy;



8. A garden house can be equipped with a homemade storm sewer from pipes, sawn in half lengthwise, and connected with glue or bolts into one long drain gutter.

Crafts for the playground

Original crafts made of PVC pipes will also turn out for a yard playground: a small playpen for a baby that develops a collapsible rug, light swings for children up to 5-6 years old, plastic sleds of an original design, collapsible goals for playing hockey or football, a small playhouse, an outdoor shower stall for summer use, a theater screen for impromptu home theater performances, and much more.

A playpen made of plastic pipes can be assembled in a couple of hours if you have a special soldering iron. You will only have to buy the required number of corners and crosses for the segments to connect the partitions to each other. The design is simple in that it does not need to make a floor.

Plastic swings must be assembled from polypropylene pipes with a diameter of 32-55 mm, or from metal-plastic pipes of large diameter. For structural rigidity, metal rods of a suitable diameter are inserted into the supporting pipes - they will not make the portable structure too heavy, but will make it as safe as possible for children. For a chair of such a swing, you can cut a sheet of OSB and bolt it to the frame. To make a stationary swing with your own hands, it is enough to drive iron bars into the ground, on which the main skeleton of the structure will be mounted.

The sled of their PVC pipes looks very original, and the same OSB or chipboard sheet will serve as a seat for them. Due to the short length of the connected segments, such sleds will turn out to be very durable. You can bend polypropylene segments on the front of the sled with boiling water - you need to lower a piece of pipe into boiling water, hold it in it for 20-30 minutes, and then, until it has cooled down, put the pipe on an iron rod and quickly bend it as needed . Leave for a few hours to cool, and the bent element of the sled is ready.

A playhouse made of plastic water pipes can be complicated to a castle - make a drawing, and your kids will have a transforming house from which you can assemble anything - from a swing to a crib. The roof and walls of the house are made of dense fabric or opaque polyethylene. And so that the children feel in such a house, as in a real one, put lighting there and make furniture - two or three chairs, a table, a cabinet. Children will be interested!

It’s quite simple to make a shower - assemble a quadrangular frame on the squares, and you don’t even need to mount a sprayer - it’s enough to drill many small holes along the long sides of the upper pipes through which water will create many jets. And the pipes of the frame made will serve as a water route - connect water from a house or an outdoor storage tank with a pump to create pressure to it. And if you make this structure higher, then you yourself can freshen up in it.

PVC pipe furniture

Despite the fact that furniture made of propylene or PVC pipes seems fragile and unreliable, it is still worth trying to make a couple of pieces of furniture to make sure the opposite is true. In addition to the original appearance, such light garden or country furniture for a gazebo or pavilion will save your family budget well.

It is impossible to imagine a gazebo without chairs or a bench, so start by designing a chair. The chair can be made anything - folding, low, with or without a back, in the form of an armchair or ottoman, a highchair for feeding a baby, a deck chair, etc. And do not limit yourself to using pipes alone - use everything that seems suitable to you in the design. So, for a chair seat, you can fix foam rubber on plywood and cover it with polyethylene, or you can use pieces of rubber in the form of crossed ribbons instead of plywood (this is how almost any chair works), and the chair will become soft and comfortable.

Here, in the gazebo or on the veranda, you can put a bed for children - single or bunk. You will understand the principle of assembling furniture immediately after you sit on the first chair assembled with your own hands - the same techniques are used when assembling any pipe structure. The benefit of such details and interior items also lies in the fact that they can be disassembled at any time in order to assemble something else that is relevant at the moment.

For example, no one will call a glass coffee table homemade if it is assembled carefully and according to the drawings - all the details for it look elegantly processed, and the masking of the connecting seams and holes will make such a table indistinguishable from the factory one. And do not forget about the main thing - any of your products will always be made in a single copy, that is, it will be only your design work.

Even in a house built according to an original project and furnished with chic furniture, you can put lightweight furniture made of pipes, and it will not spoil the interior. For example, a rack in the hallway or a hanger in the hallway will look very unusual.

Useful crafts for home and garden

If you did not buy a country or country house, but built it yourself, then at the end of the work you will definitely have a lot of unused building materials that can be used along with scraps of metal-plastic, PVC or propylene pipes. And, if crafts from pipes are not always in place to decorate or improve the functionality of the interior, then they will definitely find a use for themselves in the backyard, especially since their appearance will be original, neat and beautiful.