Giraffe from plastic bottles instruction. Children's DIY crafts

Helpful Hints

From plastic bottles, stones, old tires and other seemingly unnecessary items, you can do a huge number of things.

DIY crafts can be used for home or garden decoration, and also in order to give a neighbor person.

Kids will love it too participate in the manufacture of colorful and original crafts, especially if these are crafts for themselves.

Children's crafts from plastic bottles

Summer on the street or winter, cute toy animals will always delight the kids.

In this master class, you can learn how to make penguin crafts using plastic bottles.

You will need:

Clean plastic bottles (any size)

Acrylic paints

Scissors.

Below is a diagram that you should follow to make penguins:

Kindergarten DIY crafts. Living stones.

This can be a very creative and useful decoration for any garden or backyard. You just need to find a few simple stones and use paint and imagination to get started.

It will be easier if you use smooth stones. But, in the end, it all depends on the pattern and pattern that you are going to apply.

Here are some simple examples - animals, bugs, fish.

Children will not only be interested in coloring, but also play with such pebbles in the garden.

In addition, such painted stones can be used to decorate the interior and exterior.

You will need:

Pebble

Acrylic paints

Colorless varnish

simple pencil

1. Prepare the stone, wash it and let it dry.

2. Draw the desired drawing on the stone with a pencil.

3. Start painting with gouache.

* Well, if the color of the stone matches your drawing. Drawings with a black outline are very good.

* When the paint dries, you need to anoint the stone with a colorless varnish, thereby the paint will not be erased.

You can do something more complicated, such as a snake and a turtle.

An even more complex version is the image of a rabbit.

Children's paper crafts. An entire paper space.

It is very easy to make such a craft.

You will need:

colored paper

Scissors

Glue (glue stick)

You need to cut out strips, squares, etc. from colored paper. and make swings, slides, ladders, tables, walkways and much more.

Everything is limited by fantasy - do what you want and build the site you dream of.

Crafts for the playground. Giraffe from a tire and a log.

A very cute giraffe can be made for a playground or kindergarten.

You will need:

old tire

2 logs (short and long)

Plastic bottle.

Eyes from an old toy

Watering can (for the tail)

1. Drip the tire halfway.

2. From a short log, make a muzzle and connect it in the form of the letter G with a long log using nails. The body of the giraffe in the image is about 1 meter long, and the head is 25-30 cm.

3. Dig in a long log next to the tire (see picture).

4. Prepare a plastic bottle and make giraffe ears out of it. Next, attach these ears with glue or nails to the muzzle.

5. Animal eyes can be made from plastic bottle caps. Glue eyes from an old toy on each cap (or you can draw them with a marker).

6. You will need a watering can spout to make a giraffe tail.

7. It remains only to paint the craft so that it looks like a giraffe.

Crafts for kindergarten. Zebra from a tire and a log.

Just like a giraffe, you can make a zebra, and the African savannah will be filled with another animal.

You will need:

1 tire

2 logs

Eyes from an old toy

Plastic bottle

1. First, dig in the tire halfway.

2. Make a muzzle and neck out of logs. The torso of the craft in the image is about 70 cm long, and the head is 25-30 cm.

3. Dig in a log next to the tire.

4. Make ears out of a plastic bottle and attach them to the muzzle.

5. You can make eyes from plastic bottle caps or use parts from an old toy.

6. Make a tail from the spout of the watering can, and insert a brush made from an old tire inside.

7. The nose can be made using thick rubber.

8. It remains to color the craft.

Children's craft from a plastic bottle

Using plastic bottles, you can make a lot of beautiful, and sometimes even useful crafts.

Take, for example, this socket for every little thing. It is not difficult to make it, but it will come in handy for a little fashionista who can store jewelry, brushes and pencils in it.

Also, this craft can be used as a vase for flowers.

1. Prepare the bottle and use a clerical knife to cut off its top.

2. Using scissors, cut the bottle (to the middle) into thin strips of the same width.

3. Now the strips need to be bent. Make it so that they are perpendicular to the bottle.

5. It remains only to arrange the outlet.

Children's crafts from bottles

A lot of interesting crafts for the home, garden and vegetable garden can be found in our articles.

To make a giraffe, we need:
* Wire.
* Corrugation.
* Metal-plastic tube.
* Mounting foam.
* Acrylic enamel.
* Acrylic lacquer.

How to make a foam giraffe:
First, we will make a frame for a giraffe. Elena's giraffe is 2 m 15 cm high, the figure is quite large and therefore it is additionally necessary to strengthen the torso and legs with a metal rod. We connect plastic bottles together, instead of a neck we use a metal rod, we make legs. We insert the rod into the corrugation, and then into plastic bottles (we form the body). We make cuts in the bottles and connect the rods inside with wire so that the figure is more stable. Then we form the neck in the same way from corrugations and wire. We make the length of the neck according to your desire, as you intended.

Then, when the frame is ready for us, we increase the required volume of the entire figure with mounting foam, except for the head ... In order to save on foam, the volume can be increased with improvised materials. It can be anything: newspapers, bags, polyethylene, etc. True, Elena did not do this on this figure. Therefore, it took 4 cylinders to make a foam giraffe. Well, we all learn from our mistakes. Elena tried different foams, but she liked the Titan foam best of all, it can stay in the gun for a long time and not dry. That is, you can work more slowly and more efficiently.

We make the head of the giraffe separately. The basis is also an irreplaceable small plastic bottle. We also cut out the ears from the bottle, first we foam them to the desired volume, and only then we foam them to the head. The giraffe's eyes are large, so buttons won't fit. Elena found a rubber ball at home (she bought it from a vending machine for her granddaughter). I cut it in half and it turned out just right. I drew eyes on the balloon, covered them with nail polish several times.

We bring the head to the desired size, and then connect it to the corrugation of the neck.

We bring the neck to mind, we increase the required volume along the frame. Then when the figure dries, we cut off everything superfluous from it. The last layer of foam is leveling (apply in small drops, twisting the gun as much as possible.) We twist the foam hole harder and begin to fill the dimples, pressing down a little with the gun. When the drops are small, the foam does not increase much. And, of course, with wet hands, when the foam grabs, do not press down, but smooth the figure.

When the giraffe dries well, proceed to painting. We paint it with acrylic enamel. We cover with acrylic varnish for outdoor use. That's it, the giraffe from polyurethane foam and bottles is ready. We love the work we have done.

Elena also uses acrylate-based scuba lacquer for indoor and outdoor use, colorless. In appearance, it is white, when it dries it becomes transparent, it does not give yellowness. It is not indicated on the bank, but it looks like a semi-gloss. The price is not expensive. Colors also take the usual ones in small plastic bottles, they are perfectly bred with acrylic, as with any other paint. I used to use colored acrylic paints from art stores, but for foam figures it turns out to be a big expense, expensive. Also an important point: when making figures from foam, you do not need to putty them, practice has shown that over time the figures begin to crack. Do not look that the figure turns out to be rough, it is smooth to the touch and neither dust nor dirt lingers on it.

Giraffe from polyurethane foam and bottles

We will also consider with you another master class on making a giraffe, the author is Nadezhda Vilesova. Nadezhda told us a little about how to make this craft and shared the manufacturing process with us.
We create a frame from improvised materials, for the manufacture of a giraffe, 2 five-liter canisters were used for the frame. Then we insert four plastic tubes into the canisters, in the place where we will have legs. We fix everything with adhesive tape, and then apply the desired volume with the help of mounting foam.

When everything dries well, we create a form, and then mix the cement with gypsum 2: 4. Gypsum put a smaller part. Mix well and start sculpting very quickly, as the gypsum quickly hardens.

We are waiting for it to dry well and then paint the beautiful finished giraffe. Again, we are waiting for it to dry and paint with varnish.

Also, according to this MK, you can make such a funny donkey from polyurethane foam.

How many interesting and exciting things can be done from polyurethane foam and plastic bottles. Plastic bottles are an affordable and free material that can be found everywhere. You can make various crafts from it, and it is also very convenient for making the shape of frames for crafts. You can also make interesting crafts from polyurethane foam, and it is also very convenient. And if suddenly the figure accidentally breaks, you can foam it, paint it and it will be like new with us again
Today I want to show you two interesting master classes on making foam giraffe. Both giraffes turned out very beautiful and interesting. The first giraffe is more like a real one, and the second giraffe is more suitable for a fairy-tale character. Despite the fact that both giraffes are different, they turned out to be unique in their own way. The first master class on making a giraffe will be Elena Sadovskaya. Also, you might be interested to see how Elena made a cobra from polyurethane foam for her garden, see.

To make a giraffe, we need:
* Wire.
* Corrugation.
* Metal-plastic tube.
* Mounting foam.
* Acrylic enamel.
* Acrylic lacquer.

We bring the head to the desired size, and then connect it to the corrugation of the neck.

Giraffe from polyurethane foam and bottles

When everything dries well, we create a form, and then mix the cement with gypsum 2: 4. Gypsum put a smaller part. Mix well and start sculpting very quickly, as the gypsum quickly hardens.

We are waiting for it to dry well and then paint the beautiful finished giraffe. Again, we are waiting for it to dry and paint with varnish.

Also, according to this MK, you can make such a funny donkey from polyurethane foam.

Views: 16364

At first glance, plastic bottles are a bunch of garbage. But in skillful hands, they turn into beautiful flowers, funny animals and other art objects.

To make a cat, we need to make blanks for the body: 13 bottoms from 2-liter plastic bottles. To create a cat, I needed 5 narrower bottoms for the breast and 8 wider ones for the back of the body. Let me explain, all 13 bottoms are from 2-liter bottles .. Only each brand of beer has different bottle shapes. The difference is in millimeters, but noticeable. But you can use all of the same type of bottles. Cut out, burn the edges with a candle or lighter. And in the middle we make holes for the wire.

Let's make a blank for the head and ears. We cut the ears with scissors from the ribs of the bottom.

To fix the tail, in the 13th blank we make a wider hole. We insert the hose from the washing machine and fix it with glue.

We connect 2 bottoms and the finished head.

For the legs we use the necks of plastic bottles. Tail preparation.

Cut a strip from a plastic bottle and cut a fringe.

We start assembling the body. We take a longer wire, calculating the length of the body and tail.

I made a mistake, I took a shorter wire. Here is the result, I had to use a wine cork to lengthen the tail. A cork stopper to connect the tail.

After the first 2 blanks of the body, which we fix with a glue gun, we wind the wire for the paws. And on the penultimate element we wind the wire for the hind legs.

The 13th, final element, with the future tail, is assembled in the opposite position.

We fix the head with glue. For stability, the head and body are connected with wire. Collecting legs. We have two blanks with their necks up, and the third with their neck down.

Blanks for the tail, connect to the hose, fix with glue.

We decorate the breast and neck with beads and flowers. And here is the result!

CRAFTS FROM PLASTIC BOTTLES (LEO, ZEBRA, GIRAFFE, ELEPHANT)

Lion from plastic bottles

From ordinary plastic bottles you can make a very bright and beautiful figurine of a lion. This piece will make a great addition to any collection.

Materials for making a lion from plastic bottles

Plastic bottles
Traffic jams
paper knife
Scissors
packing tape
hot glue gun
raw rice
white glue and water
colored paper
Brush
colored foam
plastic eyes
Drawing pin
Brush for smoking pipes (wire wrapped with thread)

How to make a lion out of plastic bottles

1. Body and legs: Take 2 liter plastic bottles. Cut them into two parts (about 8 cm from the roof). The upper parts of the bottle (where the caps are) will be the legs, the lower parts (where the base of the bottle is) will be the body.

Fasten the 2 bottom halves of the bottles in the form of a torso using tape for this. Then, with the same tape or glue, attach the legs to the body (the upper halves of the bottles with recesses for the body), first you need to fill in the "legs" with 1/3 of the rice - for stability.

2. Adding a head: Cut off the lower part of the third plastic bottle, 7 cm long. On one side of the cut, make a small indentation so that our head is attached to the body at an angle. Tape the head to the body.

3. Apply glue to thin orange paper, and gently cover the entire lion with it.

4. Adding Details: Use hot glue to attach the orange and brown foam ears, paws, claws, nose, white foam teeth, eyes and mane. Use a push pin to make a small hole for the tail, and then insert a brown pipe brush with a brush on the end.

A lion made from plastic bottles is ready!

Zebra from plastic bottles

Use your creativity and make this striped friend. Such a craft will not take much time, and the result is a magnificent zebra figurine.

Materials for making a zebra

Plastic bottles
bottle caps
paper knife
adhesive tape (adhesive tape)
Scissors
Glue
raw rice
Thin colored paper
colored foam
plastic eyes
Drawing pin

How to make a zebra from plastic bottles

1. Assemble the body and legs from parts of plastic bottles, as indicated in the figure. Pour rice into the legs, for the firmness of the figure.

2. Head and neck: cut off 7.5 cm from the bottom of the bottle, then cut it as shown and tape it to the neck. For the head - using a knife, cut the bottle at the top as shown and attach it to the neck with tape.

3. Cover the craft with white tissue paper (glue it to the craft). On top of the white paper, stick black paper stripes to imitate the color of this animal.

4. Add details: Use glue and foam to make the nose, nostrils and ears, black foam hooves, black mane and eyes. Use a pushpin to make a hole for the tail, then insert a piece of white pipe cleaner (you can use wire that has white thread wrapped around it and glued on) with a small black brush on the end.

Zebra is ready!

Giraffe from plastic bottles

With the help of this simple instruction, you can make a wonderful giraffe figurine from plastic bottles. Not only you, but also your children will like this toy.

Materials for making a giraffe

Plastic bottles
Corks from plastic bottles
paper knife
Scissors
Scotch
raw rice
Glue
Thin colored paper
colored foam
plastic eyes
Drawing pin
Pipe cleaner for smoking pipes (wire on which the rope is wound)
pom poms

How to make a giraffe out of plastic bottles

1. Assemble the body of a giraffe from plastic bottles - as shown in the figure. The joints of the parts must be fastened with adhesive tape.

2. Do not forget to pour a lot of rice into the "legs" of the giraffe - for the stability of the craft.

3. Apply a little glue to thin colored paper (yellow or orange), and cover our entire craft with it.

4. Add details: glue brown foam rubber hooves and nostrils, as well as yellow foam rubber ears with a brown fabric center, brown mane, eyes, and the coloring spots themselves all over the animal's body. Use a pushpin to make holes for the horns, then insert 2 tubes with small brown pom poms glued to the ends. Do the same for the tail (brush tube + pompom tassel at the end).

5. Let the craft dry. Then, using a marker, you can apply the details of the color of the animal. Fantasize.

Elephant from a plastic bottle

Creating this majestic elephant from ordinary plastic bottles will be a great activity for a family evening. You will be satisfied with the result.

Materials for making an elephant from plastic bottles

Plastic bottles
Traffic jams
paper knife
Scissors
Glue
Scotch
raw rice
Thin colored paper
colored foam
plastic eyes
Drawing pin
Wire

How to make an elephant out of plastic bottles

1. In order to make the body and legs, you need to do the following: using a knife and scissors, cut off the bottom of 2 bottles 10 cm high - these will be the legs. Fill the "legs" with some rice for stability, then tape them to the 1 liter bottle as shown.

2. To make a trunk, you need to take 6 bottle caps, and use a hammer and a nail to make holes in the center of each of the 6 caps. Next, these corks need to be strung on a wire that is bent in the form of a trunk, and attached to the body (to do this, make a small hole for the wire in the cap of a liter bottle).

3. Cover our craft with thin gray paper, after applying glue to it.

4. Add details: glue sulfur foam ears, pink foam fingers, white tusks and eyes.

5. Using a pushpin, make a hole for the tail, then insert any rope with a tassel at the end into it.

Our elephant is ready!

The Soviet cartoon "Hedgehog in the Fog", beloved since childhood. Did not leave me indifferent years later. I decided to create a hedgehog on my personal plot - an adventurer from plastic canisters and polyurethane foam.

Materials and tools for work:

2 plastic canisters, polyurethane foam, tile adhesive, PVA glue, toothpicks, scissors, paint, stationery folded knife, toilet paper, medical bandage.

Work:

In one of the canisters we cut the side wall. And we connect 2 canisters with self-tapping screws.

We make plastic legs from a metal-plastic pipe. We fix from below through the incised side wall.

We connect 2 plastic canisters with mounting foam. The body is ready.

The role of the nose frame will be performed by the wire.

We shape the figure with the help of polyurethane foam.

We ennoble. We cut off the excess. And do not forget for the hedgehog - the traveler to make a knot on a stick.

We cover with an adhesive solution (tile glue and PVA glue). Wrap the top with a bandage. And we process 2 times with a solution of glue.

Next step. We prime the surface.

Create a "fluffy head of hair" with toothpicks until the glue is dry. It took 3200 pieces of toothpicks.

Final stage. Painting. The height of the hedgehog is 70 cm. And you can send our traveler on the road!

Plastic bottles have long entered our daily life as an integral part of household life. But do not rush to throw them away after use. You can make interesting homemade products from bottles. I bring to your attention a master class on making a cockerel from a plastic bottle.

Rooster base.

The main part of the scallop for a cockerel from a plastic bottle.

The main part of the scallop is inserted into the slot on the head.

The comb is ready.

Wing for cockerel, it is inserted into the slot on the side.

Wing slot... horizontal.

The side part of the tail consists of 2 parts.

Tail parts for a cockerel are inserted into the slots on the sides of the brightest part of the tail.

The brightest tail detail for a cockerel.

The main brightest detail of the tail is inserted into the middle slot, there are three in total.

The tail of the cockerel is assembled, inserted into the slots on the back of the cockerel.

Cockerel assembly left to put him on the rod.

We are making a fairy-tale hero-kolobok that has been loved by everyone since childhood. Such a ruddy and pretty one will decorate the garden plot, and on the playground it will be a favorite toy.

And making a bun is pretty easy. For work, we need: mounting foam, paints, polystyrene foam, cutter or knife, cement mortar, gypsum putty. And your imagination plus good mood!

We cut out a blank for a bow from the foam.

We form the legs. We remove the excess.

We start to putty.

We smooth out all the bumps and form the muzzle of the bun.

The next stage. We rub with cement mortar ..

And then putty.

Coloring our handsome.

A merry bun turned out!

In the past, when the stores didn't have such a large selection of toys, children would come up with their own entertainment. All girls love dolls, so they made them themselves. They came up with various outfits, hats and shoes. We suggest you try to make paper clothes for a stylish sailor and his companion. To do this, you will need to print the sketch prepared by us on the printer and cut out all the details and dolls with scissors. Also, on the basis of cut out outfits, you can make others designed according to your own design. 1. For...

Crafts for children from cotton pads

Crafts from cotton pads will appeal to your child, because they are soft to the touch, it is pleasant to work with them. Their advantage is that they are available, inexpensive and do not cause allergies. Suitable for children of tender age. There will be two types of crafts. I want to mention the need to prepare all the materials and tools necessary for making crafts right away, that is, before you start working with a child. So it will be possible to control that the child will not work with dangerous objects. Craft from cotton pads - Christmas tree ...

We make clothes for paper dolls

In order to make a beautiful doll and a lot of outfits for her, you just need to print the finished sketch on the printer. If it is not possible to print a color image, then let's show a little imagination. Print the sketch and follow the instructions. For this you will need: scissors; colour pencils. Step 1: Carefully cut out the printed doll with scissors, and then her outfits. Do not forget about the white rectangular clips with which the clothes will stay on the doll. Step 2: Now you need to colorize...

DIY paper doll clothes

Want to make clothes for dolls with your own hands, but don't know how to sew? Then make beautiful outfits out of paper! It takes very little time, and besides, this process is very entertaining. You can print a ready-made sketch with clothes or draw any wardrobe items yourself. Such crafts for dolls are good because with a minimum amount of improvised means you can make many outfits of different styles and colors. It is important to note that such outfits are only suitable for paper dolls, which can also be printed along with ...

How to make a wonderful sock theater for your child

All little people love toys, and they especially like those toys that can move and talk with their mother's voice. Such toys not only amuse the child, but also help to quickly learn a verse or a song, show and tell about how to behave, and also be able to unquestioningly listen to the problems of the baby. You can make these wonderful toys yourself, with your own hands from what everyone has at home. For example, if you have lost one sock, then you should not rush to throw away the second one, but use it and create your puppet ...

A simple master class on making a money tree

Have you decided to make a gift with money and give the birthday man the opportunity to decide for himself what to spend it on? But there is no desire to just give them in an envelope, and there is no idea how to make a gift memorable either? We offer you to make a money tree with your own hands. Quickly and easily, almost from improvised means! This way to give money is very original, but at the same time simple and uncomplicated in execution. After the celebration, the birthday boy will have a cool designer thing that can decorate any interior. So let's get started. 1) To start...

Children's craft - a helicopter from egg trays. Master Class

The child asks for new and new toys every day, and every day he needs something to entertain him. Kits for creativity in stores are very expensive. But parents always have the opportunity to use waste material. A helicopter from egg trays is a craft for the smallest, it is performed using a fairly simple technique. The main thing is not to throw away the junk material that you often buy - these are eggs in trays, just this paper container will become the raw material for crafts. You need to show imagination to make crafts or play with the baby ....

We make ourselves a moving bunny on a scooter

Didactic material for primary school teachers. Favorite work for children, which will bear fruit. For a primary school teacher, the most important element in the lesson is the successful behavior of students and the achievement of certain skills. At the lesson of labor training, it is necessary to interest children, and this is not so easy. We bring to your attention crafts made of cardboard, where each student can happily do exciting work for himself and consolidate practical skills in using the necessary tools. Also note that...