Blinds fastening to a plastic window. Selection and installation of roller blinds: an overview of all parameters and instructions

Ten years ago, blinds were considered exclusively an office window decoration item. But recently, the lamellas have changed, new design options have appeared. As production materials, designers began to use bamboo, linden log cabins, cherries and fabrics. It has become fashionable to select models for the arrangement of houses, apartments and public spaces. Turning to a salon or a specialized store for help, you will receive competent advice from a sales assistant on installation, care and selection. In the event that you are going to install blinds on windows with your own hands, read our article in detail.

This must be known in advance before installation!

In order for the blinds to last a long time, try to carefully carry out the installation. If you understand the details in advance, the installation process will not take much time. The main thing is to take into account the models, the method of installation and take this into account in the assembly. If you mount window blinds directly to the wall, you need to make sure that its surface is perfectly flat.

Important point! When buying, be sure to check with the consultant whether all the parts of the mounting headset are included. There are situations when the purchase of additional mounts is inevitable. It is better to take care of this in advance.

Blinds can be attached in one of four ways:

• to the ceiling;
• to the wall;
• inside the window opening;
• for each division of the window.

Which option you choose doesn't matter. It all depends on the individual preferences of the client. Are established on double-glazed windows of various forms. But the method of fastening is selected individually. The sequence of steps is roughly the same, but there are some distinctive details.

Universal step-by-step actions for installing blinds

1. Many are sure that models are sold in a standard size and neglect the preliminary measurement of the window. . We want to warn you: take the time to measure the height and width of the window opening.
2. Be sure to note that the length of the lamellas should be two centimeters shorter than the length of the window. If you provide for the option of attaching the structure to the wall, then the canvas fifteen centimeters to the right and left should cover the window.
3. Next, mark up the fasteners. Make sure that there are no difficulties with the operation of the mechanisms, and they will easily allow you to open the window.
4. Guided by the markings, attach the necessary parts to the base. Dowels and screws are screwed into the wall or ceiling. Sometimes directly into the double-glazed window. Next, a cornice is hung on them, which holds the structure.
5. As soon as you finish installing the blinds, check their mechanism.

Installation of blinds on plastic windows

Installing blinds on plastic windows is a common occurrence. Most modern double-glazed windows are made of plastic. This is a fragile material, so you need to work with it carefully. Now we will consider installation options where drilling is used:

We mount vertical blinds on plastic windows

This is one of the most common types. Functional features, wide color palette, ease of care and color combination attract customers. Because it is common in offices and public organizations. Installation of vertical blinds does not take much time.

1. It is necessary to mark up for fastening elements.
2. Next, attach the brackets and cornice.
3. Put runners on the cornice, attach lamellas to them in turn.
4. Attach weights to the control handle.
5. Check the construction.

Scheme of fastenings of vertical blinds
For detailed installation instructions for vertical blinds, watch the video below:

We mount horizontal blinds on plastic windows

In most cases, horizontal lamellas are attached to the wall. They are able to close the window opening completely, but at the same time they look aesthetically pleasing and do not “squeeze” the space of the room. There are cases when they are mounted to the window. Here, the details of the lamella are attached to each sash separately. The system for installing horizontal blinds does not differ from vertical options:

1. We mark places for fastening.
2. Attach brackets.
3. We put a cornice on the brackets.
4. Checking the length.
5. We check the installation and operation of the mechanism.

Mounting scheme

To make sure that the steps are correct, watch the installation video for horizontal models.

We mount blinds on plastic windows without drilling

If for some reason you do not want to drill a wall or a double-glazed window, you can use adhesive tape or special brackets. There are L-shaped brackets that are attached to the surface of the double-glazed window without drilling. They are easy to mount and dismantle thanks to a simple latch. But, they are attached only to those doors that open. To attach the brackets to a closed sash without drilling, use double-sided mounting tape.

Thus, with the help of L-shaped brackets and adhesive tape, you can maintain the integrity of the window profile. Mounting on adhesive tape is less reliable than others, but if you do not overload the structure, it will last a long time.

Mounting on brackets

We mount roller blinds on plastic windows

Roll models are installed in almost the same way as vertical ones. One of the most affordable options for mounting blinds is on two brackets that are attached using self-tapping screws.

1. We make markup for the details.
2. We fasten the brackets to the screws (at the same time, make sure that they are at the same level, otherwise the blinds will hang crookedly).
3. Next, we attach the cornice with the canvas.
4. Checking the construction.

Scheme of mounting roller blinds
For more details on the nuances of installing roll models, see this video:

Installation of blinds on wooden windows

Modern models are attached to wooden Euro-windows and old Soviet ones. It should be noted right away that when installing on old-style windows, you need to carefully take measurements.

Please note: the glazing bead on wooden Soviet windows should not protrude beyond the plane of the frame!

Suitable models for wooden windows include isolight, isotra, roll and rollite. These are universal models. They harmoniously fit into the interior design, regardless of its style. They are distinguished by a simple control mechanism and high performance.

One of the most difficult installations on wooden double-glazed windows is the fastening to each section. All necessary parts are included in the kit. Installation principles, as for plastic ones: using brackets or screws. If you are not afraid to make a hole in the double-glazed window, you will be satisfied with the result. With the help of fastening on screws, the structure will last a long operational period.

Mounting on brackets is considered less reliable, but it has a huge plus - no holes in the double-glazed window. When you want to remove the blinds, there will be no defects left on the window.

We install blinds on wooden windows

Let's take a closer look at the option using drilling and fastening with screws.

1. First you need to make a markup for each of the fasteners.
2. Make sure that the structure does not interfere with the opening of the window sashes.
3. Make holes for the screws. Install screws and dowels.
4. Attach a cornice to them.
5. Install another fastener at the control thread to save the structure from the accumulation of load in that area.
6. Attach runners and slats to the eaves.
7. Check the construction.

Using self-tapping screws, it is easier to attach the cornice to the window. Self-tapping screws will not bring harm to the window profile, but work carefully during installation. If you want to remove the slats after a while - no problem. Having dismantled the structure, the holes are filled with special white silicone glue - and not a single trace of the screws will remain.

Good to know! To begin with, it is better to drill holes according to the markup, and then mount the parts. Screwing in self-tapping screws individually is one of the reasons for the appearance of a crack. And this installation method guarantees the integrity of the plastic.

When the holes are prepared, the brackets are carefully screwed to them. Then install and close the eaves. The following steps are required:

1. Install the hook in the control mechanism.
2. Install the cane.
3. Attach the tip to the cane.
4. Fasten the thread with a knot.
5. Check the operation of the blinds.

Installing the lamella design is not difficult if you follow all the requirements and work carefully. Also read the installation instructions, which are necessarily attached to any model.

Consumers only now began to appreciate all the advantages of blinds and realized that the use of this item is possible not only in office premises. Fastening blinds to plastic windows provides good protection from sunlight, while not interfering with the opening of window sashes and airing the room.

Design Options

Blinds are divided into the following types:

• horizontal;
• vertical;
• roll;
• pleated.

Lamellas for them are made from the following materials:

• plastic;
• metal;
• fabrics;
• tree;
• bamboo.

Horizontal blinds are, of course, horizontally located and fixed to each other lamellae. They rotate around an axis, when opened, they rise up. The mobility of such a curtain is carried out using a chain.

vertical work similarly to horizontal ones. Move according to your desire: to the right, to the left or from the center in different directions.

Roller blinds cover the entire area of ​​the window, they are a single canvas that can always be rolled up.

Pleated blinds have an unusual texture. Curtains that have been corrugated and impregnated for strength with a special composition can be horizontal or vertical. They are assembled with an accordion, can be mounted on a window opening or on a frame. The structure is controlled using a cord or chain.

What to choose on the balcony?

Since in the summer time all rooms are always ventilated, it is worth considering whether it is necessary to install blinds on plastic windows for a balcony or loggia? Will they interfere with the constant opening and closing of the valves? The answer is unequivocal - blinds on the balcony are needed. Especially in the case when the balcony is turned into a separate room.

When choosing this element of decor for a balcony, carefully study the features of fastening the blinds. Of course, you should not forget about personal preferences and tastes. Due to the variety of configurations, materials and color shades, you can choose filters for any interior, but following a few rules when choosing:

• balcony windows often open, so the blinds must be practical;
• their fastenings must be reliable and functional;
• for a balcony, it is better to choose fabric or plastic models, since wooden and metal ones make a lot of noise;
• not all types of blinds are suitable for balcony windows, in particular for sliding and aluminum.

Tip: Plastic blinds will be the best option for balconies and loggias. They do not fade in the sun, are light in weight, easy to use, easy to clean and retain a decent appearance for a long time.

You might be interested to know. Overview of detergents and care tips.

How to choose your own size

Those who decide to install blinds with their own hands need to know that window measurement requires special accuracy. You can get the most accurate result using a steel tape measure. An important condition in the implementation of this process is accuracy down to the millimeter. Not a single window (window opening) has an ideal rectangular shape, so any parameter is measured in several places.

Before measuring, you need to decide on the installation method, that is, how to fix the blinds on plastic windows:

• in the opening;
• on the wall;
• on the sash.

Measurement rules for each type of fastening

1. measurements for fastening blinds in the opening are made according to the width and length of the window opening. Their length is equal to the height of the glass with a margin of 1 cm and taking into account the sealing gum. To determine the width of the blinds, the width of one sealing gum is added to the width of the window glass. It is necessary to provide that the eaves of the blinds do not rest against hinges and slopes. The length of the blind chain should be 2/3 of the height of the window. The chain is usually located on the side of the loops. It is also necessary to take into account that, when assembled, the blinds do not interfere with the opening of the window.
2. When attaching blinds to the wall their height is determined independently. They can completely close the window opening or be slightly higher than the window sill. Their width should be 10 cm more than the width of the window opening. In this case, it is also necessary to take into account that the cornice of the blinds will take about 5 cm from above.
3. When attaching blinds to PVC windows on the sash measure the distance between two vertical glazing beads. To determine the length of the blinds, the length of the window is measured. If you do not plan to leave a side clearance, then 30 mm must be added to the width of the blinds.

Tip: If you are afraid to make a mistake in the calculations, contact the help of specialists who will competently measure the blinds.

And this video shows an example of how to measure the blinds.

Mounting methods

Before hanging the blinds, you need to decide whether you need a window sill to accommodate, for example, flowers. Blinds are attached in two ways: without drilling or by drilling. The eaves are a basis of any blinds. It is the cornice that is attached to the ceiling, to the wall, in the window opening or to the sash. Special brackets can serve as a support for the eaves.

Blinds installation with drilling

If the curtains are hung on each window sash, then fastening is carried out using self-tapping screws. The upper bar of the blinds is applied to the upper edge of the double-glazed window, where the fastening points are indicated with particular precision. For a more accurate fastener, you can pre-drill small holes. Then the brackets are applied to the marked places under the very top of the double-glazed window frame and securely fastened with self-tapping screws using a screwdriver, after which the blinds are installed on them.

Next, a fishing line is attached to hold the lamellas. To do this, two holes are made on the frame under the lower glazing beads of each sash. Holes are drilled exactly under the corresponding line outlets located on the upper bar of the blinds. The lower ends of the fishing line threaded into the blinds system are threaded into the plugs. The plugs, in turn, are threaded into the holes made, and the fishing line is pulled.

This mounting method is used to install roller or horizontal blinds. Vertical blinds are attached to the upper slope of the window, to the wall or to the ceiling, also by drilling. First, holes are drilled in the ceiling or wall with a puncher, where dowels are inserted. The cornice of the blinds is screwed on with screws.

Installation of blinds without drilling

If in the future you have to remove and remove the blinds, then the holes will become a big drawback in the appearance of the window. Therefore, to install blinds on a window sash, brackets can be used, which can be attached to the frame in the following ways:

• fastening for the upper part of the profile, if the sash opens;
• using double sided tape.

With the help of magnets on the flap (bottom), the blinds are fixed parallel to the window when it is opened.

These methods are more gentle and safe in terms of damage to the metal-plastic frame. Fastening blinds to windows without drilling is quite reliable. And you can remove them for cleaning, for example, with almost one hand movement.

All blinds have the correct geometric shape, so the markings for fixing the top bar of the blinds must be done with particular accuracy. The slightest skew will spoil the overall appearance of the window, as well as hinder the work of the moving mechanisms of light filters.

Mounting Features

Rolled

Roller blinds are the best directly on the window sash. This method is associated with ease of installation and subsequent operation. Blinds installed in other ways do not allow the window to be opened when the curtains are closed. Details of roller blinds are made of plastic, so the structures require careful handling during fastening.

It may also be useful for you in landscaping. Instructions for its installation on the balcony can be found here.

Horizontal

An important feature of horizontal blinds is the possibility of installation in places where the installation and operation of other types of blinds is impossible for a number of reasons. They can completely close the window, or install on each sash, and it is also possible to place horizontal blinds between the frames.

vertical

Blinds of this type are attached in three ways:

• to the upper slope of the window;
• on the wall;
• to the ceiling.

Attached by drilling only. Special care must be taken when drilling the slope with a hammer drill, otherwise part of the wall may break off.

How to remove blinds

We have considered options for installing blinds on a window, but there comes a time when these curtains, even the most reliable and durable, need to be cleaned or washed. To do this, they must be removed. How to remove blinds and how is this process carried out depending on their type?

How to remove vertical

• Open the slats and put them together.
• Remove the chain from the weights, pull out the weights.
• Remove each lamella: the elongated part of the slider clip is retracted to the side, the lamella is lifted up, then retracted to the side.

How to remove horizontal

• Detach the cornice from the brackets.
• If there is a decorative cover, remove it.
• Raise the lamellas up and find the tabs on the upper edge of the retainers.
• Pull the latch first towards you, and then to the right.
• Pull curtains forward and down.
• Remove the entire structure.

How to remove roll

• The tongue located on the bracket is bent with a screwdriver.
• The shaft is removed from the bracket by moving towards you or down.

Blinds Installation Instructions

This section shows a video instruction on how to install blinds on metal-plastic windows. Installation is carried out using self-tapping screws on the window sash.

Good afternoon everyone!

Today I would like to talk about installing blinds on a plastic window. The opinion that window openings in residential premises should be covered with textile curtains is a thing of the past.

Blinds are diverse and functional so much that they will give odds to any curtains and tulle. Before buying a design of a certain color or size, you need to think about how it will be located on the window and how you can install it.

• vertical or horizontal slats,
• rolled or pleated,
• fabric or plastic - regardless of these indicators, blinds can be mounted using power tools and without it.

It is important to choose the location option:

1. in the window opening
2. over it
3. or directly on the window sash.

Each of these cases should be considered separately.

Blinds are the most practical way to decorate windows. Easy to install and low maintenance blinds are very popular. Due to the variety of types and colors, they will harmoniously fit into any room and complement the interior of the room. In this article, we will consider the types of blinds and how to install them on windows. We will learn how to fix blinds on our own in different ways.

Kinds

In building stores, eyes run wide from a variety of colors and textures of window decor. How to choose the right blinds and install them correctly? First of all, let's figure out what types of blinds exist.

1. Horizontal blinds. The most practical, close the window tightly and protect from light and prying eyes.
2. Vertical blinds. Most often they are installed in offices or used to decorate blind windows, as they make it difficult to open windows.
3. Roller blinds. Close the window very tightly. They can become an independent design of a window opening.
4. Cassette blinds. They consist of a special box, which is installed on the frame. Do not prevent windows from opening.

How to choose

When choosing blinds, start from the functional purpose of the room and the general style of the room. Blinds can be fabric, plastic, aluminum, bamboo, etc.

The variety of colors and textures will allow you to choose the decor that suits your room. Be sure to measure your window before purchasing. This will allow you to choose the product of the appropriate size.

How to install blinds yourself

So, the blinds are bought. Do not rush to call the installation wizard. You can quite cope with this task yourself. In addition to acquiring a useful skill, installing blinds can be an interesting family pastime.

Blinds are installed in three ways:

1. In the overlay. The product is attached at the top of the opening, and closes the entire window to the window sill or below.
2. In the window opening. Blinds are mounted in the window opening closer to the window. Also close the entire window to the windowsill.
3. For each sash separately. The most practical way. The blinds are attached directly to the sash, thereby allowing the sashes to be opened or the window to be ventilated without lifting the blinds.

Note!

When taking measurements, you need to make an allowance depending on the type of installation. If you are going to fasten the blinds overlay - add 10 cm to the width and height of the window opening. You will install blinds in the window opening - the height of the opening in its pure form, the width - minus 1.5 cm. When installing on each sash - the width of the sash is minus 2 cm, the height of the sash is minus 3 cm.

Each type of blinds has its own installation features. Next, we consider separately the principles of fastening products of each type.

Installing horizontal blinds

Usually, all necessary fastenings are included with horizontal blinds. Armed with a screwdriver, we proceed to the installation. They are installed in the window opening or on each sash separately.

1. To fix the blinds to the window, measure the desired distance and mark the places where the top bar will be attached.
2. Using a screwdriver, drill holes and attach the corners that will hold the top bar.
3. Attach the plank to the corners. First on one, then on the second. You should hear a click when attaching.
4. Dissolve the fixed canvas down, mark the points where the bottom bar will be attached.
5. Install the bottom bar in the same way as the top bar using the corners.

Installation of vertical blinds

Vertical blinds consist of a cornice with clamps that regulate the sliding / sliding and slats - a canvas that closes the window.

The kit includes all the necessary fasteners, as well as detailed installation instructions. This type of blinds is installed overlaid.

1. Attach the cornice with clips to the ceiling. You can use the same screwdriver to fix the eaves.
2. Insert the slats into the eaves. Each part of the canvas must be mounted separately. To do this, insert each strip into the corresponding latch, wait for a characteristic click.

Installing roller blinds

Roller blinds have the same mechanism as horizontal blinds and are installed in the same way. It is most convenient to mount roller blinds directly on the sash, then they will not interfere when opening windows. If you need to fix them in a window opening, it is better to use additional brackets, because the window handle protrudes several centimeters. Without brackets, the handle will stick out from under the canvas and spoil the overall look.

Installation of cassette blinds

Cassette-type blinds are a ready-made box with a mechanism that is attached to the window frame. Installation is quite simple.

1. Attach the top bar to the canvas with screws.
2. Then glue the side guides (usually on an adhesive basis) onto the sash vertically.
3. Expand the canvas, adjust the borders of the upper and lower positions of the canvas.
4. Install all accessories.

Useful advice!

Blinds have a clear geometric shape, so carefully measure and calculate the attachment points to avoid asymmetry and unnecessary holes.

How to fix blinds on plastic windows

What to do if you need to fix the blinds to the sash, but you can’t drill plastic windows? In this case, you can install blinds using brackets. The devices are attached to the frame, and the supporting structure of the blinds is mounted on them. You can fix the bracket to the window frame using:

• double-sided tape;
• hook on the upper part of the frame of the opening sash.

This method will allow you to securely fix the product, and preserve the integrity of the metal-plastic profile.

To properly install blinds with your own hands, it is important:

• decide on the type of blinds you want to purchase;
• choose the best installation option;
• take measurements of the window, take into account the necessary margin;
• when installing, strictly observe the dimensions of the product;
• carefully mark the drilling points;
• follow the instructions included in the kit.

How to take measurements

How to install blinds

Use dowels and screws that are appropriate for the fasteners and the material of the wall or ceiling to which the blinds will be attached.

Note!

Before installing fasteners, check if the folded blinds prevent the window from opening.

We advise you to carefully look at whether window handles, flower pots (and other "foreign" objects on the windowsills) will interfere with the opening and closing of the blinds and the rotation of the slats (windowsill, radiators, etc.)

How to install horizontal blinds

1. Measure the same distance from each edge of the window.
2. Drill the wall and insert a dowel suitable for the wall material (concrete, plaster, etc.) into it, then screw the fixing with screws.
3. Using a level and ruler, mark the location of the second fastener. Screw the second fastener in the same way as the first.
4. When installing horizontal blinds, it is necessary to use an additional intermediate fixing if the width of the blinds exceeds a certain distance. To attach vertical blinds with a width of more than 1.6 m to the ceiling, you need to install 3 mounting brackets.
5. Place an additional fastener 10 cm away from the control cord (this is where the louver mechanism experiences the most stress).
6. Fasten blinds to mounts

Cutting horizontal blinds to width

1. Lay the folded blinds on a horizontal surface and measure from each side the part that needs to be cut off. It is necessary to cut off equal parts of the blinds on the left and right.
2. Cut off the cornice and rail. Be sure to cover the slats so as not to damage them.

Height cutting blinds:

1. Remove the parts that are under the lower cornice at the bottom of the blinds in such a way as to release the cord.
2. Untie the knots to free the slats.
3. Remove excess slats to achieve the required blind height.
4. Align the blinds by inserting the bottom curtain rod into the last link.
5. Cut off the free ends of the cord, tie knots and put the lower cornice pieces in place.

Roller blind cutting

1. Using a hacksaw, cut off the tube and bottom cornice.
2. Cut the fabric with scissors. If a pattern is applied to the curtains, it is necessary to cut equal parts of the curtains on the left and right.
3. Installation of roller blinds on the tube is carried out using double-sided adhesive tape located on it. (Be careful not to unfold the curtains all the way: always leave some fabric on the tube).

Cutting vertical blinds

Cutting the control rail of vertical blinds.

The slats are easy to cut and install. Cut the slats with scissors to the desired height, following the instructions on the package. Cut off the control rail with a hacksaw.

When choosing the material of the blinds, it is necessary to take into account in which room they will hang. For the bathroom and kitchen, plastic blinds are best suited - they are not afraid of moisture and are easy to clean. For the kitchen, you can also recommend aluminum blinds that do not support combustion.

source: leroymerlin.ru

Why are blinds needed?

Their main characteristics are: the ability to easily attach to windows, ease of use and excellent performance of their main function - regulating the light in the room. With constant work at the computer, it is also impossible to do without the use of blinds.

The only question in this case is to understand how you can hang blinds on plastic windows in order to get the most out of their use.

Step-by-step instructions for installing blinds

Determine the size

So, the first step is to buy blinds of the selected production, the appropriate size and other individual characteristics. It should be noted that before going shopping, it is necessary to determine the size of the glass: taking into account this value, you need to know that the blinds must completely cover the glass (in width), slightly going to the limits of the frame.

Unpacking

After the purchase, the initial business is to unpack and untangle the cord, as well as to make out the fasteners.

From what is included in the package, dowels can be set aside, because in this case the blinds will be attached directly to the window.

Deciding on fasteners

We find a mount for which we will mount our blinds. The second step in installing the blinds is to find two metal brackets with latches. This will be required in order to subsequently fix the container with the "blinds" on them.

We make the markup and install the mounting brackets

The next step is markup. For its correct implementation, first of all, you must carefully read the instructions. After all, you need to place the mounting brackets in such a way that it is easy to insert a container into them.

In other words, you need to find the optimal distance from the end of the markup. An important point at this step is the complete exclusion of amateur performance: everything on the window should be drawn with a pencil according to the level, but not by eye.

Otherwise, the curvature of the fit will immediately catch your eye when the plates rise, and this does not look very aesthetically pleasing. It is also necessary to pay attention to the fact that the bars do not move outside the glass, since if there is a shift, the adjustment of the container will be violated.

Useful advice!

Brackets must be fastened with latches upwards. However, before that, it is necessary to drill the window with a drill (thin), and then direct the screws towards the plastic.

If everything is done carefully, then nothing terrible will happen to the window, because the remaining drilled holes are removed using acrylic sealant. However, with the accuracy and caution of the execution of this step, they will not be at all.

We put on the container

Then the container is put on. We cover the latches and determine the correct fit. In the event that the brackets are firmly located on the window, and the container can be easily removed or put on, it is required to say that the work was done perfectly. However, it is not yet fully completed.

The last thing left is to install the lower holders. Their role is to fix the web of slats and fasten it to protect it from free movement. When lifting, the lower edge of the web must be removed from the holders by hand.

Installing the bottom brackets

In order to mark the lower holders, you need to lower the canvas down. Then you need to estimate by eye their position in the case of a tightly stretched canvas.

With a dangling web, it is impossible to accurately measure the lower holders. After a correct measurement, it is imperative to drill holes and screw the holder with screws.

Mounting holders

At this stage, the question begins to disturb: how should the holder be twisted - outward or inward?

The answer is quite simple: both when screwing in and out, the result remains the same, in any case, no screws remain visible. Therefore, here it is already required to rely on your convenience and principles.

This completed the process of attaching the blinds to the window.

There are twelve types of blinds. Each of them has its own distinctive characteristics. Initially, all blinds are usually divided into vertical and horizontal.

Horizontal blinds are more popular for decorating a home space than a public one. This is due to the fact that they take up less space than vertical ones. The design is not massive, it is mounted by drilling or without it. They make horizontal models from thin log cabins of wood: cherry, beech, oak, yew, metal alloys, fabric and bamboo.

Blinds installation

Vertical blinds are more common in the design of spacious offices, hospital rooms, classrooms, rooms with large panoramic windows. They are created from French jacquard, linen, polyester and thin plastic. Fabrics are pre-treated with special dust-repellent, antistatic agents. They are easy to care for, clean from dust, which is very important for rooms with a high degree of traffic.

Depending on the type of construction, finishing materials, dimensions and appearance, the installation option is selected. There are two solutions that either involve drilling or not. Massive types of blinds, made of wood or metal alloys, are fixed only with a drill, screws and brackets. Light roller blinds, mini system, roller blinds, bamboo can be mounted on special L-shaped brackets or mounting tape. Let's take a closer look at the options for how to hang blinds.

Scheme of installation of vertical blinds

How to make a measurement for fasteners

To make a measurement for a horizontal structure, it is necessary to measure the length and width of the double-glazed window. When installing the model, add +1 cm to the length, and +5 to the width.

Installing horizontal slats on the sash involves the following actions:

1. We measure the width of the window opening in several places.
2. We make a mark in the widest place.
3. Add one centimeter to the width.
4. We measure the height.
5. Add four centimeters to the height.

Vertical structures are attached directly to the double-glazed window, wall, ceiling. In order for the lamellas to evenly cover the entire area of ​​the window, the area on the sides must exceed 8 centimeters. Thus, the double-glazed window looks harmonious. When installing on an opening or ceiling, add the area from the ceiling to the window or from the opening to the window to the height.

Installation instructions for vertical blinds

How to hang vertical blinds

Before starting installation, make sure that all construction details are available.

1. Eaves, fasteners (brackets).
2. Vertical slats.
3. Control device, electric drive (if built-in).
4. Clothespins for slats.
5. Swivel mechanism.
6. Runners for slats.
7. The control thread with which the mechanism turns.

Next, strictly according to the marking marks, make holes. If the installation takes place on a double-glazed window, work with a drill very carefully. Make the required number of holes, insert fasteners. After you need to install a cornice with runners. Then attach the slats. Pull the adjusting thread through and secure with a weight. Check slat rotation. Vertical blinds, with the exception of woven fabrics, are installed more often by drilling.

How to hang horizontal blinds

At a distance of 5-7 cm from the glass, make markings for fasteners. Then make small holes with a drill. We install the brackets and attach the cornice to them. A characteristic click is evidence of correct installation. We lower the blinds and install the lower clamps. To do this, we make markings and screw a self-tapping screw with a lock at the bottom or side of the window sash, after which we check the fixed structure. More detailed information on how to hang blinds, you can get in this video:

Installation of blinds without drilling

There are several options for mounting without drilling. They are suitable for the installation of lightweight designs.

• Construction / mounting tape.
• Special magnets.
• L-shaped brackets (they are attached to the opening doors of double-glazed windows).

With the help of mounting tape, the roller blind box, mini or fabric roller shutter systems can be easily attached to the double-glazed window. To do this, glue the double-sided adhesive tape to the structure, which then needs to be pressed against the window. Be sure to degrease the window surface before attaching the eaves to the adhesive tape! Make sure the curtain is evenly attached. Do not mount the structure on a cold frame. The adhesive tape will lose its properties due to the cold surface. Mark up ahead of time.

L-shaped brackets are attached only to the opening window sashes. The advantage of installation on the L-shaped bracket is that there is no need to make holes in the double-glazed window. You don't have to worry about window depressurization.

To save money, you can try to install blinds with your own hands. This work is not difficult, you just need to correctly mark the slope or frame, depending on where you need to fix the structure. You can use different ways to install such curtains, the choice is made on the basis of design features and dimensions.

Overview of types of curtains blinds

For different objects, the design of windows of a certain style and functionality is selected. Lamellas in the design can be arranged in different ways: vertically, horizontally.

Horizontal blinds

You can find different types of arrangement: pleated, inter-frame, attic, bamboo roller shutters, roll shutters belong to the same group. The main distinguishing feature is the horizontal slats. They can have different thicknesses, widths and function differently. Such structures can be attached to a slope, a frame, they are also installed on top of a window block or inside a frame. It all depends on the size of the windows and the preferences of the owner of the home.

Construction of horizontal models

Classic horizontal blinds can be safely installed in premises with a variety of purposes: offices, private housing, production sites, administrative, retail and educational facilities. These are universal designs that are found in various shades.

Vertical blinds

Such curtains are usually mounted on top of windows, which is due to structural features: vertically oriented slats, most often made of woven material. There are two main types of such structures: floor-length or window sill-length.

General view and arrangement of vertical models

This is one of the reasons why it is customary to install such curtains in private houses, apartments and offices. Installation of blinds of this type is carried out on self-tapping screws. There is an alternative installation option - to the ceiling surface.

Roller blinds

Blinds for windows in this design combine two types of curtains: classic fabric and horizontal plastic. They are equipped with a continuous sheet of various types of material, close the double-glazed window, and, if necessary, rise, folding into a roll.

Roller blind device

Blinds of this type are fastened with self-tapping screws, as well as brackets. You can hang them in various interiors.

Mounting options

Horizontal and vertical curtains are characterized by individual design features. Based on this, various fastening methods have been developed:

Mount 1: For vertical structures

Fastening for vertical horizontal models to the wall

Vertical blinds can be mounted under the ceiling or over windows. Such blinds cannot be installed on plastic windows without drilling.

Mount 2: On a horizontal view

Structures with horizontally oriented slats in the standard version are attached directly to the window sashes, to the upper slope. Horizontal blinds without drilling can be placed in any design only on the sashes of the window unit.

G - can be mounted in the window opening, on the ceiling, wall, on the sashes of plastic windows

But the inter-frame analogue was created exclusively for installation in the space between the window frames. There are restrictions on installation to the upper slope, in particular, inter-frame and attic blinds are not attached in this way. If the installation is done by hand, it is imperative to take into account the design features of the products when choosing the installation method.

Preparation, measurements

Useful tools: screwdriver / screwdriver, tape measure, carpenter's pencil. In order for curtains to function as efficiently as possible, measurements must be taken correctly. The design should be symmetrical with respect to the double-glazed window.

If blinds without drilling are attached with adhesive tape, it is possible to correct errors. For analogues mounted on brackets and self-tapping screws, you need to markup as accurately as possible.

To fix vertical curtains, it is enough to measure the dimensions of the window opening, the distance between the attachment points and the length to the bottom edge of the curtain. This will allow you to correctly position the structure relative to the level of the floor and the window opening.

Horizontal blinds are often installed on the sashes, so the main measurements relate to the double-glazed window: height, width of each glass. To these values ​​\u200b\u200badd 2 cm along the upper edge and bottom, 0.5 cm on the sides.

Installation of vertical blinds

Anyone can do the installation of such curtains with their own hands. If the blinds are short, they can be placed inside the window openings. Otherwise, the installation is carried out on the wall or under the ceiling.

For error-free fastening, a consistent instruction is given:

Step 1: Markup

The center point of the window opening is determined and correlated with the center of the blinds eaves. You need to make your own marks along the edges of the structure. The points for installing self-tapping screws are marked on both sides of the eaves closer to the center of the window block by about 5-6 mm.

Attach the cornice to the wall so that the center of the cornice coincides with the center of the window, and make marks along the edges.

Step 2: Look at the level

At the same time, it is necessary to assess whether the lamellas are correctly positioned. Their lower part should be 1-2 cm above the floor level. The same amount must be retreated when installing short curtains (up to the windowsill).

Step 3: Mounting brackets

Dowels are installed in do-it-yourself holes prepared in advance. Brackets are fixed, this is done using self-tapping screws. Further, special clips are installed on these elements.

Be careful with the puncher when drilling for the bracket fasteners, otherwise part of the wall may break off.

Step 4: Installation of slats and chains

A cornice is attached, into which it remains only to insert the runners and directly hang the vertical lamellas themselves on them. The final touch is the chain attachment.

The slats must be hung exactly in the order in which they are folded in the package. Otherwise, you can break the pattern of the blinds.

Installation of horizontal

Guided by the markings made earlier, you can do the fastening of a horizontal structure with your own hands. There is an instruction for this:

1. First you need to fix the upper fasteners. To do this, using a screwdriver, holes are prepared that will allow you to install the brackets using self-tapping screws.
2. Next, you need to hang the cornice, it is fastened until it clicks.
3. Holes for the lower fasteners (corners) are drilled taking into account the dimensions of the thread retainer connecting the lamellas. Typically, the design of blinds requires holes to be made on the sides of the glass. Then the latch, which is connected to the lamella web, can be easily inserted into the corners.

Do-it-yourself installation must be done with the utmost care, otherwise the blinds will not function correctly.

Methods for fastening roller blinds

When deciding how to install blinds on a window, the first task is to determine the appropriate method of fastening. The roll structure is mounted both on self-tapping screws and with the help of an adhesive (adhesive tape, liquid nails).

2 ways of attaching rolled curtains to pvc windows, to l-shaped brackets and to adhesive tape

In the first case, the installation technology of vertical curtains is taken as a basis, since roller blinds require fastening only in the upper part of the structure. To "plant" the structure on the adhesive, the surface of the windows is cleaned and degreased. This will improve the adhesion of materials.

This option is suitable for double frames. Installing an inter-frame plastic curtain is a complex process and involves the need to violate the integrity of the frame profile: holes are drilled (2 pcs.) To output the blinds control system (handle and cord).

They should be located at the top of the inner sash. Brackets are installed on the upper profile, the technology for mounting horizontal blinds is taken as a basis.

Basic tips for choosing:

• Before you purchase a design, you need to clarify the composition of the kit, in particular, the presence of fasteners;
• If the installation is easy to do on your own, then it is better to entrust the repair of curtains to the master;
• Plastic is easier to care for;
• It is not recommended to clean the new design too often, as this will cause the protective coating to wear off quickly.

Detailed instructions:Do-it-yourself step-by-step installation (photo)

For example, horizontal blinds can be positioned as inside in any convenient way. However, the most popular option is on top of the sash. The interframe structure is more difficult to install, and the vertical counterpart can only be located above the window or under the ceiling due to its large dimensions.