All from tires. Crafts from tires for the garden (42 photos): making a flower bed, practical crafts and an ottoman

In our article we will talk about crafts from tires for the garden with your own hands. In the photo in the first part of the article - useful crafts that will make the life of any summer resident more convenient. In the second part, we have collected for you the most bright decorative crafts from tires- flowerpots, swans, hanging pots for ampelous flowers and workshops on their manufacture.

Part I. Useful do-it-yourself tire crafts

Non slip tracks

Number one in our hit parade is tire tracks. Firstly, you no longer have to fight with the grass growing on the paths. Secondly, reliable protectors will not let you slip. Thirdly, with such paths you will not put dirt into the house.

Tire tracks are durable, and it’s not difficult to make them: cut off the treads and use nails (or better, self-tapping screws) to attach them to several transverse sticks.

Reliable steps

Who happened to fall down the stairs, he will appreciate the reliability of the coating on these steps.

Textured border

Tires usually have a pretty nice pattern. It can be used to decorate the lower part of a small utility room. At the same time, you will save the walls from the inevitable dust and dirt.

Before making such crafts from tires it is important to make sure that the length of the protectors with the same pattern is enough to decorate the entire room.

cheap tire seat

Who would have thought, but the tires are convenient to use as garden "ottomans" - however, they are quite solid. Such do-it-yourself tire crafts are easy to make, the only negative is that they are quite heavy and not very convenient to drag.

Convenient bike parking

Do you have a family of avid cyclists? Make a tire bike rack for the whole family. And most importantly, when a new cyclist appears, it will be very easy to expand it.

Part II. DIY decorative crafts from tires

Ground flowerpots

A “chamomile” is cut from the top of the tire, then the tire is turned inside out. It remains to paint it, and the flower container will be ready. If the tire is not removed from the base, you can make a flowerpot with a leg.

The most time-consuming operation is the eversion of the tire. There is a little trick: when you turn the tire about halfway, press on it to get an oval - then the work will become easier.

Combine several tires, experiment with the shape of the petals and coloring, and your crafts - flowerpots from tires - will be different from others.

Tire swans

Swans are a classic tire craft. The technology is about the same. In the photo - instructions for this do-it-yourself garden tire craft.

1. Draw a cutting pattern on the tire.

2. Cut the tire according to the scheme (first the head, then the tail and feathers).

3. Turn out the tire.

4. Make a beak and paint it red.

5. Fold the 2 halves of the head together, insert the beak between them, fasten with self-tapping screws.

6. Raise your head and press it down a little. Fix the formed fold with self-tapping screws.

7. Color the swan, decorate the eyes to close the screws.

Tire cutting options may vary slightly. Choose the one you like more.

Exotic birds from tires

Tires are not a material that can be easily processed. It is a rigid product made from a range of elastic yet durable elements. Processing must be treated carefully, carefully, observing safety precautions. It is advisable to involve children in the work only at the final stage of creating crafts.

For work you will need:

• electric drill, a set of drills;
• jigsaw, grinder;
• paints, brushes, solvent;
• self-tapping screws, sets of nuts, bolts, washers.

Tires can be crafted into various items. Can be used for:

• economic needs;
• creating a decor of the territory;
• play area equipment.

Household crafts

Most often used for caring for animals, gardens. When breeding poultry, they are used as drinkers, feeders. For arrangement, they are cut into two halves, put on the walking area. Drinking bowls, feeders, it is desirable to install on stands. Tires can be used as perches. Manufacturing is elementary, it will not cause difficulties during creation. It is enough to put a few tires, fill with straw, hay.

Bed arrangement

Of these, it is convenient to equip beds for vegetables grown in the bush way. To make the base of the beds, the middle is cut out on both sides of the tire. The resulting side is installed at a certain place in the garden. Filled with earth and fertilizers. Plants are planted in the created bed.

For growing cucumbers, tomatoes, eggplants, car tires are preferable. Lettuce, parsley, celery should preferably be planted in beds equipped with truck tires.

Furniture manufacturing

Furniture is a necessary household item. Tables, ottomans, chairs are always in demand. Manufacturing is not difficult, but the process is longer and requires decoration.

Materials, accessories:

• thick plywood, chipboard;
• jigsaw, drill;
• self-tapping screws, a set of furniture bolts with nuts;
• foam rubber;
• glue for plastic, foam rubber;
• the cloth;
• furniture stapler;
• enamel paint.

Process of creation

To make a table, you will need three tires. For the manufacture of a pouffe two. We fasten the autoshines with the help of self-tapping screws or bolts to each other. From plywood, chipboard we cut out the countertop, pouffe seats. We glue foam rubber on the seats, we cover it with a cloth, we pin it with a stapler to the seat. We fix the countertop with screws and bolts. We paint the details of the table, pouffe. Leisure area furniture is ready.

Territory decoration

A neat view of the territory near a residential building always pleases people. Landscaping is a necessary, pleasant activity. Beauty, originality of lawns, paths cause a feeling of respect, add pleasant impressions. Most often, flower beds and planters are equipped to create decor.

Required details:

• tires;
• plywood, chipboard;
• dye.

Manufacturing procedure

A circle covering the bottom of the tire is cut out of plywood, screwed to the base with screws. The manufactured container is painted. After drying, it is exposed on the land. It is covered with earth, fertilized, planted with flowers. Such flower beds will ennoble the entire territory of the site.

A flower bed made up of several tires looks impressive. A flower bed can consist of several rows. The easiest option is two-row in the form of a flower. In the central part, flowers are planted, which are the basis of the plan. Flowers are planted at the bottom, grass creating a general background.

We make pots

For manufacturing you will need:

• specified tools;
• tire;
• rope;

Creation order

On the tire with chalk, draw a straight line along the upper edge of the inner rim. Cut off the remaining sidewall with a jigsaw. We turn over to the other side, we carry out the same manipulations. It turns out a rubber basket. We paint, after drying we hang out in the allotted place. We fall asleep the earth, we plant flowers.

These are the simplest elements. Complex elements include animal figurines, cartoon characters and fairy tales. But they are also craftable. Fantasy, patience, desire will help to accomplish any task.

Equipping the playground

The children's playground is a special place. It should be equipped with various gaming places, please the eye with an interior, ensure the safety of forwarding. The use of tires will ensure that these conditions are met.

From tires are made: trees, sandboxes, labyrinths, swings, tunnels. On sports grounds, they are used as airbags when equipping jump zones. For the entourage, we decorate the site with figures of our favorite cartoon characters, animals.

To create a swing you need:

• tire;
• chains, rope;
• 4 staples;
• drill.

Manufacturing procedure

We paint the tire with a bright color. On its upper part we drill holes equidistant from each other. In the holes we fasten the brackets with bolts. We hook chains to the brackets or tie ropes. We hang it on the crossbar, a branchy tree.

The second version of the swing. Used:

• one tire;
• wooden beam;
• board;
• self-tapping screws;
• door handles.

Manufacturing procedure

Cut the tire into two equal halves. On the cut line, we install a beam equal to the diameter of the tire, attach it with self-tapping screws. We paint the outer, inner surfaces. After drying, we attach a polished, painted board to the timber. On both sides of the board, at an equal distance, we fasten the door handles. The swing is ready, we install it on the platform.

Craft "Cheburashka"

One of the favorite children's characters is Cheburashka. This cartoon character is always happy to be present.

For arrangement you will need:

• 3 tires;
• paints;
• plywood sheet;
• self-tapping screws;
• small pieces of furniture.

Figurine production

Tires of cars are used for creation. We insert plywood into two tires, which we attach with self-tapping screws. Paint the base dark brown. We paint the plywood inside the tires with a lighter color scheme. Tires with inserts are fastened together. We install vertically on the tire laid horizontally. We cut out the ears from plywood, fasten the figures on the head with brackets. We apply the elements of Cheburashka's face with paints.

There are many photos of tire crafts on the Internet. They will help you make decisions when making crafts. This activity will bring benefit to the family, joy. Inspire new creativity.

The human imagination is inexhaustible. Craftsmen from the people work real miracles with the fact that pragmatic consumers send to the scrap. Almost everything is used: broken pots, seashells, pebbles, old appliances and other utensils that are no longer used for their intended purpose, but acquire a second life when the hands of the master touch it. And, of course, the list of "raw materials" for practical decor is not complete without obsolete car tires.

Previously, only economy-class playgrounds were made of them, today they have come up with many more creative applications: photo car tire crafts accompanying our article is a clear confirmation of this.

Crafts from tires for a summer residence: garden furniture

The simplest, in our opinion, tire product – dining or coffee table. Glue two or three pre-cleaned and painted tires (depending on how high you want to get), fasten any alternative countertop on top: wood, plastic, glass, or just glue the tire with twine. Movable wheels attached to the bottom will add mobility to the product.

Complement an unusual table with one more tire product – ottoman or armchair. Cut out a circle from chipboard or thick plywood to fill the cavity inside the tire, put a couple of layers of foam rubber on top - the pouffe should be comfortable. The upholstery for such an “armchair” can be knitted, sewn from any fabric or an old plaid into a spectacular Scottish cage. The legs are made from blocks, and the back is made from another tire, cut in half.

How to make an ottoman from a tire: a master class

Crafts from wheels for children

Tire crafts for will not let your child get bored, providing him with a productive and exciting leisure. Paste the old wheel with colored twine, and cut a “cover” for it to size - you get a comfortable box for children's outdoor toys.

A massive tire from a truck easily turns into, and a pair of tires suspended from a tree will become both swing and balancing projectile. The main thing is that the tree is strong, and the ropes and fasteners are reliable - appropriate for the age and weight of the child.

Do-it-yourself swing from tires: video

Crafts from tires for the garden

The hollow tire is a great alternative. And it’s not at all necessary to cut swans or other intricate designs out of it. tire figures , as they did back in Soviet times. Just a few wheels, painted in bright colors and laid out in a certain sequence, look much more spectacular and stylish.

Get creative - don't bet bus-beds on the ground, and hang them from the ceiling on ropes or chains. Planted in such a “pot”, a curly, beautifully falling flower, for example, an ampelous petunia or begonia, will please with abundant and long flowering.

If you want to zone the space of your backyard, make a low h abortion from tires by placing garden lanterns next to it. When there are elevation differences or access to water on the site, old tires will become an alternative stairs, the main thing is to reliably “mount” them in the ground.

It is not worth rushing to get rid of old tires by throwing them into a landfill.

And not only for the reason that this can harm the environment, but also because tires are easy to turn into useful and beautiful things.

You can do it yourself, without special skills, and you almost always have the necessary tools at home.

There are a lot of options for what can be made from car tires. Let's talk about the most interesting and useful.

From tires it is easy to create a house for flowers - a flower bed.

We break the tire bed like this:

• put three wheels of different diameters on top of each other, starting with the widest;
• paint their outer sides (preferably with acrylic).

We fill the finished craft with earth and plant the plants.

Tire borders for flower beds

To separate a flower bed from a garden path or garden plot, we create tire fencing borders:

• we mark the territory where we will put rubber curbs;
• cut the tires in two;
• we dig in each of the parts and paint.

You can also create a fence, which is also the flower bed itself:

• remove the tire (preferably with a special knife for rubber);
• paint (oil paint) and put in a checkerboard pattern on the surface;
• pour inside tires mixture of gravel and sand, put soil on top of it;
• we hoist the second tier of “wheels” on them;
• planting plants.

There are many more ways to attach tires to the garden plot:

• flowerpots;
• beds;
• decorative wells.

Read in detail about how to make various crafts for flowers.

Tire jewelry

It is easy to make a variety of DIY crafts, decorative items and garden decorations from tires and tires.

Palm

We “plant” the plant like this:

• cut the "wheels" into ribbons (5-6 pcs.);
• paint in bright green;
• attached to wooden pegs hammered into the ground or real tree trunks.

You can also create figurines of a swan or a parrot, which will also be flower beds.

well for flowers

Summer cottage furniture

From tires you can make a comfortable sofa that can be put in the country or in the garden.

At first:

• we create a place for a seat by the sofa - for this we use two or three wheels, put them in a row;
• we put synthetic padding pillows in the tire holes;
• now move on to creating the back- take tires and fix one above the other;
• in the middle we place synthetic padding pillows.

If you want to learn how to make other pieces of furniture from car tires for summer cottages and gardens, get step-by-step instructions with photos, we recommend reading.

Walkways for the garden

We create garden paths as follows:

1. We release the tires from the tread.
2. Cut into ribbons.
3. Stretch them along put on the board and nail down.
4. We place it in the place of the future track.

On our website, you can also learn how to make crumb rubber using.

Related videos

You will learn from the video many creative ideas so that worn tires can be put to good use.

Output

Even if there is no opportunity to do tires yourself, it’s still don't throw them away. What to do in this case? The best option is this.

It is always nice to make something useful out of a junk item, and if the craft turns out to be beautiful as well, the pleasure is double. One example is tire crafts. They make decorations for a country or garden plot, various flowerpots and flower girls, build children's attractions and even make country furniture - tables and chairs.

Flowerbeds and flower beds from tires

Let's start with the most, perhaps, simple flower beds and flower beds. Do you think it is difficult to make a multi-tiered one? Maybe, but not from tires. Take several pieces of different sizes, paint them in bright colors and fold them in a slide - one on top of the other. To prevent your slide from falling apart, fasten the tires from the inside with a screwdriver and self-tapping screws. Two per connection will suffice. Inside you fill up the soil, plant the plants. So that the soil does not spill out, you can lay the tire inside with a piece. It will remove excess water, but will not allow the earth to get enough sleep. A beautiful tiered flower garden is ready.

If you like flower beds of the correct form, you can make these. For example, folding a flower bed in the form of a camomile out of tires. First, lay out and fasten the tires together in the lower tier. Fill the middle of the tires with earth, as well as the free space inside the circle. There, for better drainage, you can lay broken bricks or other construction debris, sprinkle a little earth on top and tamp. On the prepared surface, stepping back from the edge by more than half the diameter of the tire, lay out the second tier. They are also fastened together, the middle is covered with soil, and the core is erected on top. At the very top, you can plant tall flowers, and on the lower tiers - curb or undersized.

Another option for flowerbeds of tires in the form of chamomile is in one tier. To do this, you will have to cut the tires.

How to cut tires

In general, when making crafts from tires, they often need to be cut. This is far from easy. It is more or less easy to cut off the side surface from the tread. People with strong hands and good knives do it by hand. Good, by the way, training for the hands and the entire shoulder girdle. If you already cut with a knife, lubricate the blade with grease: rubber constantly “jams” the metal, and the blade coated with grease slips well.

You can also cut off the sidewall with a jigsaw or grinder. Cutting with a grinder is relatively fast, but the stench is wild. Therefore, the grinder, even if there is one, only makes the first cut, so that you can introduce a jigsaw file. Further work with this tool. For cutting rubber, a blade with a reverse tooth made of good steel is taken.

If you have to cut the tread, it is useless to do it with a jigsaw or even more so with a knife. At least with an ordinary knife. Blades made of special steel can even cut iron cord, but hardly anyone wants to disfigure such a tool on an old tire. Therefore, most often they work as a grinder. To avoid trouble, the protector is fixed: always think about safety. If the sidewalls are already cut off, the tread band is quite elastic and can be compressed with a clamp. Cut, it does not spring.

Flowerpot from the wheel: turn out the tires

If there is a tire with an old rim, you can make a flowerpot on a leg out of it.

To do this, cut one sidewall along the tread. And they turn out. This is not an easy task: it requires considerable physical strength and perseverance. The rubber is elastic and it is impossible to turn it out the first time. If not at all, notches are made on the outside across the tread. They should be quite deep, but not through. It will also help if you make cuts along the edge with a depth of at least 5-7 centimeters. They will look like fringes on an inverted tire.

Why turn out? The inner surface is smoother, and the shape can turn out to be more interesting, especially if the edge is not linear, but jagged. You will get a gracefully bent decoration.

For details on how to turn a tire, see the video.

Similarly, you can turn out a tire without a rim. The sequence of actions is the same. First, one of the sidewalls is cut off - straight or in a zigzag. In order for the "petals" to be even, it is desirable to mark them. It is convenient to do this with chalk. According to the mark, they are then cut with an electric jigsaw or a knife (if the cord is synthetic).

They twist it like this: they step on the inside of the tire, take the edge with their hands and pull it up and towards themselves. It is important to achieve the first result: when at least some part is arched. If the tire looks like the photo below, this is already a success. It is developed by consistently turning the edge inside out and standing on the part that has already been turned out so that it does not turn back out.

Watch the process again in the video. This time, the tire is turned out without a wheel (by the way, they cut it with a knife).

Even by itself, such an inside-out tire looks good. If you paint it, it gets even better. If desired, they can be combined - different colors, sizes, installed in different ways: on a tire or on legs.

A high flower bed always looks beautiful. Especially with ampelous plants. It can also be made from tires, and there are several possibilities. In the photo below, there are two ways to fix the cut tires at different levels. The first is to use stumps for this, to which flowerpots are attached with nails or self-tapping screws. The second is to use reinforcement - three or four rods, on which to put rubber. Having set the tier at the right level, it needs to be fixed; on metal, this can only be done with the help of clamps.

It is not always possible to put a flowerpot on the ground: some areas are so developed that it is problematic to single out even one square meter. In this case, people came up with various hanging flowerpots, and also from old tires. Only a small part of the whole tire remains, so there is a lot of cutting ... please be patient. For example, you can make hanging planters in the form of a dolphin, parrot, rooster and other outlandish birds. For a few ideas, see photos.

Tire planter - parrot, rooster and dolphin

All these tire crafts. Only a small part of them - the heads - are often made of dense foam. Having cut and polished the part of the desired shape, it is fixed with self-tapping screws smeared with glue (this is a secret, remember), and then painted. How to make a parrot from a tire, see the video.

Below are step-by-step photos that capture the main stages of creating a table or ottoman from a tire. You will need two more circles of plywood or fiberboard of a suitable diameter, a hemp rope is used for finishing. Of the materials at hand, you will need glue and a glue gun, as well as varnish and a brush for applying it. To connect the circles with the tire, you will also need self-tapping screws - 8-10 pieces on each side.

Next, we take a glue gun and warm up the glue, apply it to the sidewall. If there is no such luxury in the household, take glue, which is in a larger tube, such as "liquid nails". It is easier to work with a mounting gun. Apply the strip on the sidewall, glue the hemp rope. Yes, all the way to the top.

Using the same technology, we decorate the cover of the table (ottoman). You need to start laying from the middle: apply glue, lay the rope.

Finishing work - applying varnish. We do slowly, soaking well. Here is what should be the result. If you made a table, you can put glass on top - a rope, even varnished, is not the best cover for a table, although it is beautiful ...

Variety can be achieved through a cover. It can be sewn from a vending dense material.

Cute puff…

You can knit - large knitting looks interesting.

Large knitted knitted cover - looks interesting

If you don’t feel like sewing and knitting, you can use old knitwear cut into strips. They are cut into long strips 3-5 cm thick, wound into balls and then wrapped around an ottoman. It turns out interesting, especially if several colors are combined.

If you need a taller ottoman, twist the two tires together with self-tapping screws, and work on them in this form.

See the video for another option.