Soundproofing an apartment which material is better. Thin soundproofing of walls in an apartment: characteristics of materials and installation methods

If the neighbors hear everything that happens in your house, then we are not talking about any comfortable living. Houses made of wood or panels transmit sounds too well, so additional noise-absorbing materials must be used here. Noise insulation of walls in a wooden house is a stage of the same importance as wall insulation and installation of communications.

How to competently isolate yourself and your loved ones from unnecessary noise outside and inside the room? Before starting work, the first thing to do is to establish the nature of the noise and its source. Based on this, you will buy soundproofing material and sheathe them with exactly those places in the apartment where the noise comes from. For example, if a strong stomp is heard from the neighbors above, then you need to treat the ceiling with noise-absorbing material. If loud voices of neighbors or sounds from the street interfere, then it is necessary to sheathe walls and partitions, etc. Noise isolation can be done independently or use the services of specialists, in any case, it should not only protect the residents of the house from outside sounds, but also not give sound coming out of your room.

Noise types

There are different types of noise:

• air - sound that propagates in space through air. This is the sound of voice, musical technology, TV;
• structural - the sound that the gas and water pipeline systems in the house, the pump, the garbage chute make;
• shock - noise from mechanical actions or from movements (stomping of feet, knocking, movement of a car). Such sound is transmitted through walls, the earth's surface, solid objects.

What kind of noise should you protect yourself and others from? There are specially developed sanitary standards that allow a certain volume of sound in residential premises. The regulatory document states that for daytime the volume should be no more than 65 dB, and for night time - no more than 45 dB, while children's crying has 80 dB.

Sound level versus sound pressure table

Loudness greater than 120 dB is considered hazardous to human health. That is why it is so important to ensure peace and quiet in the home by lowering the sound transmission of walls and other building structures.

The nuances of the process to improve sound insulation

Before buying noise-absorbing products and proceeding with their installation, it is necessary to carefully inspect the walls and ceiling for defects (cracks), and also close up holes around inaccurately mounted sockets using fiberglass for this. The following factors also contribute to the increase in noise in the house:

• if the building materials themselves have low soundproofing properties;
• if the doors and window frames of the old design, or low-quality double-glazed windows;
• if finishing materials poorly absorb noise.

In order for the money and effort spent to give the expected result, it is necessary to focus not only on the sheathing of the room with absorbent materials, but also to do a number of related work:

• replace old doors with more modern ones, with elastic seals along the contour;
• change wooden windows to double-glazed windows;
• install seals on interior doors;
• cover the building from the outside with materials with high sound-absorbing properties;
• use materials with a low level of sound reflection for finishing the facade.

If you do all of the above work, then this will not only save you from unnecessary noise outside and inside, but also significantly insulate the building.

Materials for absorbing noise in the house

There are many ways to soundproof walls in a residential building. Consider the characteristics of some of them and options for their use.

Cork noise insulators

Outside, you can use thick cotton fillers, but if you need to sheathe the walls inside, then the smallest thickness of the material is important so as not to take up a lot of room space. Porous cork wallpapers or cork wood panels will do just fine with this.

Cork not only does not let noise through, but, like any tree, retains heat, and is also used as a finishing material. Corridors, hallways, children's rooms are often trimmed with such wallpaper.

Loaded vinyl (or noise block)

If square meters are especially small, then it is impossible to do without vinyl film. Its thickness is not more than 3 mm, but at the same time the film is very heavy - 5 kg per square meter. This is what provides a large noise absorption coefficient.

Loaded vinyl (noise block) - high-quality, dense, but expensive membrane

Vinyl film is flexible, resistant to moisture, and the mineral dust that is added to it absorbs sound. One layer of material is capable of delaying sound at 25 dB, two layers - more.

ZIPS

ZIPS panels glued under the wallpaper.

They are a two-layer "sandwich", consisting of panels, inside of which there is a basalt fiber with a solid gypsum-fiber sheet.

Soundproofing panel ZIPS-Module floor

Such panels have a thickness of up to 7 cm and absorb up to 10 dB.

Substrates

Soundproof underlays and underlays for wallpaper.

This thin material is easily glued to the wall and is not at all expensive, but the effect of such sound insulation will not be great.

Fiberglass

Fiberglass slabs act as the middle layer in sound-absorbing partitions.

They are placed inside the interior partitions or between the floor slab and the false ceiling. So that the fiberglass does not crumble during installation, it is wrapped with a special non-woven fabric.

Drywall

He also has the ability to delay sound, of course, in combination with other materials, for example, a “sandwich” of fiberboard, chipboard and drywall.

Mineral wool

Mineral wool, ecowool, basalt wool.

These are fibrous materials that absorb noise well, but have a large thickness, through which they cannot be used in a small room.

Expanded polystyrene

The material is environmentally friendly and durable. It has low thermal conductivity, therefore it is used for thermal insulation. It is thinner than mineral wool, resistant to moisture and mechanical stress. Able to delay sound at 4 dB. Often used as an insulating material in combination with others.

In general, it should be remembered that any type of noise-absorbing structure alone will not give the desired result. The more materials are combined when protecting the house from extraneous sounds, the better the effect will be.

Room soundproofing process

To completely block sound vibrations from one room to another, it is necessary to block all directions of sound wave propagation.

Walls and partitions

Most often, walls and interior partitions are isolated from extraneous noise. Various mineral wools are very easy to install, so they are used more often.

Soundproofing walls in a frame house

To do this, perform actions in the following sequence:

1. Horizontal slats are nailed to the walls, this is a crate for ventilation.
2. A vapor barrier film is glued to the crate.
3. Construct vertical racks of aluminum.
4. Mineral wool or ZIPS panels are laid between the racks. The material inside is fixed with slats.
5. Then the vapor barrier film is glued again.
6. At the end, the walls are sheathed with some kind of finishing material.

Floor

To muffle the sound penetrating into the apartment through the floor, fibrous bulk materials are used: ecowool, basalt wool, etc. A cork and rubber substrate will also be good.

Isolate the floor like this:

1. The old floor is torn off, and waterproofing is laid on the logs and between them.
2. Next, lay the material for soundproofing.
3. Then again put waterproofing material.
4. On the top give a rubber-cork substrate.
5. And then chipboard plates are laid and the space between them and the wall is compacted with felt.

Ceiling

It is possible to seal the ceiling so that the noise penetrates less, both from inside the room and from the side of the attic, if it is a private house. It is also desirable to negotiate with neighbors in a high-rise building, then the effect will be better.

Suspended ceiling soundproofing

Soundproofing the ceiling is done in this way:

1. Dismantle the old coating from the ceiling.
2. A construction stapler attaches a vapor barrier tape.
3. Next, fill the gap between the suspended ceiling and the coating with sound-absorbing materials. These can be foam boards, basalt wool, Ursa type roll insulation.
4. If the ceiling is made of wooden beams, then mineral mats are laid between the beams.
5. Sheathe the ceiling with finishing material.

conclusions

Soundproofing walls in a wooden house is a necessary procedure, since in addition to protecting against unwanted noise, the above materials provide heat conservation in the home. And living in a warm and soundproof house is much more comfortable.

Owners of apartments and houses often face the problem of insufficient sound insulation in their homes. Because of this, sounds from outside become audible in the room. It interferes with sleep and normal activities. To increase the level of comfort in the room, it is required to use additional materials for soundproofing walls and ceilings. The advice of experienced builders should be considered before starting repairs.

Varieties of noise

What is the most effective soundproofing material for walls? Today, there are many proposals on the building materials market, which are designed to protect against the penetration of extraneous sounds into the home. In quiet times, even minor noises coming from neighbors' apartments or sounds from the street can be clearly heard. However, loud sounds can reach you at any time of the day, even when your apartment or house is not quiet enough.

You will be interested:

Panel and brick houses, both old and new, do not differ in high-quality sound insulation of both walls and interfloor ceilings. All sounds are transmitted through the air, causing the materials of walls and ceilings to vibrate. Even minor noises coming from the outside to the owners of the house can cause insomnia. And children's crying, screams, the sound of repairs, loud music cause significant discomfort.

In a large apartment, it’s not a sin to turn around to the fullest, making thermal insulation and providing protection from noise in accordance with all the rules. However, what about a small area in which every centimeter is expensive? Thin sound insulation of walls, floor and ceiling in the apartment is the option that will save your living space!

Principles of Soundproofing – How is noise measured?

In high-rise prefabricated buildings, noise can turn into a real disaster. Sometimes it’s not at all necessary for neighbors to turn on loud music or drill holes at midnight with a drill - even ordinary conversation can penetrate walls and prevent us from concentrating on our business or leisure. Only high-quality soundproofing can help with this disaster.

However, almost all materials suitable for this kind of work have a solid thickness, besides, if you want to achieve a really good effect, you need to make multilayer soundproofing from different materials.

The point is in the nature of sound waves - overcoming materials of different structure, the sound loses its strength. In addition, the very origin of sound can be different - airborne noise, you guessed it, comes to us through the air, shock and structural ones can overcome walls and ceilings or reach our ear with the help of water pipes.

As you know, sound power is measured in decibels - dB. An ordinary human whisper has a strength of 20 dB, while doctors consider noises in the range of 30-40 dB to be quite comfortable for our perception. Citizens often do not even hear how the computer “rustles” or the refrigerator hums softly - they just get used to such sounds. However, at 60 dB, even a person accustomed to noise begins to experience discomfort.

In the fight against noise, mankind has come up with two types: the first type absorbs and scatters sound waves, the second type reflects them and prevents vibration. When finishing a room with soundproofing, it is important to choose at least one material from each group, in which case the result will be really significant.

The ability to absorb sounds determines the absorption coefficient, which is measured in the range from 0 to 1. For example, classical building materials, due to their dense structure, have a low coefficient: for brick this value is only 0.05, for wood it is slightly higher - 0.15. The closer the material is to unity, the higher its quality. The most modern materials boast an absorption coefficient of 0.5 to 0.9. Monolithic materials, as a rule, do not absorb sound well, but granular, fibrous and cellular materials do this very well.

The thinnest soundproofing of walls in an apartment - when there is not enough space

Only living in a small apartment, you can realize the value of every centimeter of living space. If you look at it, insulation and soundproofing measures can really “eat” a decent piece of an apartment - these very few centimeters on each side will not be enough in the end to squeeze a refrigerator or washing machine into a corner or place a convenient desk.

How to make multilayer soundproofing and at the same time save the necessary centimeters? In this position, only careful selection of particularly thin materials will save you. We will warn you in advance - this option can be considered a compromise, but by no means the best.

All soundproofing materials according to the type of structure can be divided into:

• Soft - have the highest sound absorption coefficient from 0.7 to 0.95. However, the thickness of such materials will not suit the owners of small premises - the layer of the same mineral wool must be at least 5 cm, while in the multilayer structure space should be given to the air gap and drywall, which will hide the material underneath.
  
• Semi-rigid - such materials have a lower sound absorption coefficient (up to 0.75), but at the same time they are endowed with a smaller thickness. In fact, this is the same soft type of material, but it has undergone additional processing - pressing. Ready-made slabs and carry out the sheathing of the premises.
• Rigid - these materials cannot boast an absorption coefficient above 0.5, and even then in the case of relatively thick materials. However, the thickness of most rigid materials is just what you need for high-quality sound insulation.
  

Thin materials - the golden mean of sound insulation

With the help of thin materials, you can achieve the golden mean of sound insulation - you will save living space and at the same time save yourself from extraneous noise. Of course, the loudest sounds in this case will still break the silence, but it’s not every day that neighbors start repairs or a quarrel.

Of the thinnest materials, the following can be distinguished:

1. Compound Green Glue- a viscous substance that is used in combination with drywall slabs or other finishing material. The substance is applied to the reverse side of the boards in an arbitrary pattern, and the boards are attached to the wall. As it hardens, the compound reflects and cuts off sound waves. Together with the plates, the maximum thickness of the structure will reach only 50 mm.
   
2. Loaded vinyl, or noise block- with a material thickness of only 2.5 mm, the membrane has a fairly considerable weight, which is explained by the presence of barite and aragonite mineral particles in the vinyl composition.
3. Membrane Teksound (Tecsound)- with a standard thickness of 3.6 mm, the membrane has high soundproofing qualities. It is also appreciated for its ease of installation. The main component, aragonite, is bound by a small amount of polymers, which give the material such flexibility.
4. Soundproof wallpaper lining- foamed polyethylene, which is wrapped on both sides with paper by thermal lamination. The substrate has a very small thickness, which, however, is enough to even out small surface defects. The substrate is used as a secondary insulation and sound insulator - the maximum sound that this material is able to stop is only 20 dB (human whisper).
   

No matter how manufacturers praise their offers, not a single experienced craftsman will advise you to take one thing. We combine and combine again - this is the key to successful soundproofing! For example, Green Glu works great with tougher substrates: drywall, vinyl-laden, Texound.

The soundproof lining under the wallpaper, which is quite obvious, is glued to the finished hard surface - all the same drywall. By itself, this material is ineffective, but you should not neglect it. If your walls are so thick that they themselves hold back extraneous sounds, then such a lining will be enough.

Thin sound insulation of walls is also possible with the help of a material donated by nature - a sheet of pressed cork chips. Only 3 cm replace a ten-centimeter pine beam. One layer of cork is able to isolate you from noise up to 50 dB (normal conversation volume). In combination with other materials that are harder or softer, you will provide good noise protection. In addition, you can be sure that the cork will adequately endure exposure to moisture and will not become moldy.

Whatever material you choose, first carefully analyze where the noise comes from the loudest. Perhaps this is due to cracks or cracks that let sounds through. Very often, having soundproofed a through hole for an outlet (as happens in panel houses) and other cracks, residents notice a significant reduction in background noise. So the problem may lie in the details!

The owners of apartments in high-rise buildings sooner or later begin to think about soundproofing. Such measures have to be resorted to due to extraneous sounds penetrating into the dwelling. Noisy neighbors, crying children, sounds from consumer electronics or construction tools, etc. - all this becomes the reason for the start of work on soundproofing the apartment.

• Air (pets, ongoing construction in the neighborhood, vehicles passing by, etc.);
• Shock. These are sounds from impact on walls and partitions (perforator operation, hammer blows, drilling, etc.)
• Structural. This is any noise penetrating through the structural elements of a building.

To protect against various kinds of extraneous noise, a set of measures is taken to soundproof walls, ceilings, and floors. For this, special materials with sound-proofing and sound-absorbing properties are used.

Sound-absorbing materials serve to ensure that the sound coming from the room does not return back into the room. The structure is usually fibrous, granular or cellular.

Soundproofing materials prevent outside noise from penetrating. And the thicker and denser they are, the more protected the room from extraneous sounds.

The best option is a combination of both types of materials. As a result, you can achieve a fairly high level of protection of the premises from extraneous noise, both from your side and from your neighbors.

Types of soundproofing materials

In general, such materials are necessary in order for sound waves to be extinguished (dissolved) in them. This is achieved by applying a special structure.

The materials themselves are divided into:

• Soft. These are mainly fiberglass based boards, mineral wool, etc.;
• Rigid. Materials having a porous structure, for example, gypsum, perlite, pumice, vermiculite;
• Semi-rigid. Foam type, can absorb up to 75% of noise.

Until recently, such a combination was practically impossible - the soundproofing layer turned out to be very bulky, and its installation was rather labor-intensive.

Nowadays, such problems are solved thanks to the development and production of modern materials for sound insulation, which have exceptional noise and sound absorbing properties.

What is the best material to soundproof an apartment?

mineral wool

The most common and one of the most effective materials is mineral wool, produced in mats and rolls. It is believed that mineral wool does not transmit about 99% of noise. This is a universal material and is suitable for soundproofing any surfaces in the apartment.

The only thing that deters many from using mineral wool is the need to install a frame in the space of which it fits.

Advantages of mineral wool as sound insulation

• Light weight;
• Affordable cost;
• incombustibility;
• Simple installation (laying);
• Efficiency;
• Additional thermal insulation;

Main disadvantages- the need for a frame and loss of properties after exposure to moisture. Therefore, mineral wool is usually not used in rooms with high humidity (bathrooms, showers, etc.). Although in this case there is a way out - the installation of a vapor barrier material. How effective it will be depends on the level of humidity.

Cork

Another great sound-reflecting material is cork. It is usually produced in slabs and can be laid on almost any surface. Cork is considered the most effective for impact noise protection. For soundproofing the ceiling is not suitable, but for the floor - just right.

This is a modern soundproofing material. It is produced in the form of plates, fastened with a puncher and dowel-nails with umbrellas. Installation is very simple and you can easily handle it with your own hands.

Many manufacturers and experts claim that ZIPS is the best material for soundproofing. The only drawback for many apartment owners is the high cost.

Another modern material that has recently appeared on the market. It has good soundproofing qualities. It is made of their synthetic components. It is recommended to lay in several layers, since this material is produced with a thickness of only 5-8 mm, which, as practice shows, is not enough for an apartment.

Such panels are attached directly to the wall, after which all joints are filled with acoustic sealant. The thickness varies from 4 to 12 cm. The outer surface is suitable for finishing (putty, painting, wallpaper, drywall, etc.)

Suitable for complex protection of the premises from extraneous noise or as an independent material, but with less effect.

Advantages:

• Dense and thin, while providing quite a decent level of noise protection;
• For production, mainly argonite is used, which is safe for human health.
• Flexible, easy to fit at any angle.

Do not know what material to soundproof the walls in the apartment? This is not surprising - in construction stores the choice is simply huge and it can be very difficult to choose a decent option from the whole variety of products. Next, we list the most popular and most effective brands of soundproofing materials.

The best material for soundproofing walls in an apartment: a review of brands

Before proceeding with the choice of sound insulation, you need to know about such a parameter as decibels (db) - this is an indicator of the sound level. The permissible level in an apartment building during the day is 40-45 dB, at night (from 7:00 to 23:00) - 25-30 dB.

Wall panels KRAFT

They are wood fiber boards. One side is covered with corrugated cardboard, the other side is covered with waxed paper. Environmentally friendly and efficient material. Mounted by gluing. The front part is subject to fine finishing (puttying, painting or wallpaper).

Characteristics:

• Noise reduction: up to 23 dB;
• Dimensions: 2700 x 580 mm;
• Weight: 5.5 kg;
• Thickness: 12mm.

Panels EcoSoundIzol

They are made of quartz sand and cardboard (7 layers). Installation is easy to do with your own hands - the panels are glued to the wall with liquid nails. Environmentally friendly material, safe for health.

• Noise protection: up to 38 dB;
• Weight: 10.5 kg or 18.5 kg;
• Dimensions: 1200 x 450 mm or 1200 x 800 mm;
• Thickness: 13 mm.

ISOTEX - sound and heat insulation panels

For production, fiber of coniferous trees is used. Distinctive features: flexibility, strength, elasticity, easy installation (thorn-groove system), stylish decorative design. Ideal for impact and airborne sound protection. Easy to cut with a hacksaw or even a construction knife.

• Noise protection level: 23 dB;
• Weight: 1.2 kg;
• Dimensions: 2700 x 580 mm;
• Thickness: 12mm.

Sound and heat insulation panels ISOPLAAT for walls

Protects the room not only from noise, but also from the penetration of cold. The panels are "planted" on liquid nails, the front side is suitable for any type of finish.

• Noise protection: 23 dB;
• Weight: 4 kg;
• Dimensions: 2700 x 1200 mm;
• Thickness; 10 mm.

Overview of floor soundproofing materials in an apartment

To protect the floor from extraneous noise, roll underlays are used for parquet, linoleum, laminate, etc. The most effective option is a “floating” floor (multilayer structure consisting of a base plate, screed and underlay)

Soundproof

Rolled material with excellent noise, heat, waterproofing properties. Protects well from impact noise. It is used for installation of a "floating" floor as a substrate. Recommended for use in schools, kindergartens, hospitals and ordinary apartments.

Shumanet

The best option for both noise and vibration isolation of the floor. Distinctive features: easy installation and affordable price. The basis is fiberglass and bitumen.

MaxForte-EcoPlita

It is produced in the form of plates, designed for soundproofing walls, ceilings and floors. In the latter case, it fits into the lag structure. 100% consists of crushed basalt stone without harmful impurities.

Fonostopduo

Membrane material in rolls. Ideal for floor soundproofing against impact noise. Provides protection level up to 26 dB. Thickness - 6mm.

What material to choose for soundproofing the ceiling?

For the ceiling, a suspended structure is usually mounted, into which soundproofing material is laid. Some panels can be mounted on dowel nails with large hats (umbrellas) or liquid nails.

Zvukanet Acoustic

Roll, membrane material, suitable for soundproofing walls and ceilings. The front side is prepared for wallpapering.

Characteristics

• Noise protection: up to 21 dB;
• Roll width: 500 mm;
• Roll length: 14 m;
• Thickness: 5 mm.

EcoAcoustic

This is a modern heat and sound insulating material made on the basis of polyester fiber. The composition does not use harmful adhesives. It resembles foam rubber and is suitable for use in a hinged structure.

• Dimensions: 1250 x 600 mm;
• Thickness: 50mm;
• Colors: green, gray and white.

Tecsound

Roll material for sound insulation. It has excellent performance and high density. It has a self-adhesive surface that facilitates the installation process.

• Dimensions: 5000 x 1220 mm;
• Thickness: 3.7mm;
• Noise protection level: up to 28 dB.

Some useful tips when choosing a material for noise and sound insulation.

For a reliable result after soundproofing walls, ceilings or floors, it is necessary to take into account some nuances.

• Whatever manufacturers and sellers promise when offering ultra-thin panels and slabs, the effectiveness depends on the thickness of the soundproofing material. A barrier with a thickness of at least 50 mm can absorb sound waves. In such isolation, the noise "gets stuck" both on one side and on the other. Of course, you will have to sacrifice the area of ​​\u200b\u200bthe room, but soundproofing will be more effective.
• For soundproofing the ceiling, it is better to use basalt mineral wool with a thickness of at least 30 mm and a density of at least 40 kg / m3.
• Before carrying out work, you should make sure that there are no cracks, voids, joints, and, if any, repair them with putty. It is also necessary to fill all openings under sockets, switches, junction boxes with mounting foam or other material.
• If you want to perform a comprehensive soundproofing of an apartment with modern materials, it is better to contact acoustic specialists who will calculate the required level of sound absorption, the necessary characteristics of the material.

Finally

To protect your home from extraneous noise, which often causes nervous breakdowns and depression, you will have to make a little effort and financial costs. At first glance, it may seem that this work is difficult, but having understood some of the nuances, types and brands of soundproofing materials, it becomes clear that the process is not so complicated.

In the conditions of urban life, living in apartment buildings, the issue of sound insulation is very relevant. The neighbors are undergoing repairs, children are noisy, TVs are on, the proximity of highways, other noises penetrating into the apartment make it necessary to resort to a soundproofing device for the room.

The article discusses the materials used for soundproofing walls and ceilings in an apartment, as well as their pros and cons. How to choose the right material to get the desired effect and get rid of extraneous sounds penetrating into the home.

Among the variety of materials, you need to make the right choice, which depends on the definition of the type of noise. They are divided into categories:

1. airborne noise. Sound waves propagating through the air cannot penetrate walls and other obstacles. Colliding with them, they cause vibrations that are transmitted through the air, so the sounds penetrate into neighboring rooms. Effective soundproofing materials dampen such vibrations and fluctuations, relieving you of the problem.
2. impact noise. With a direct impact on the structure (drilling, stomping, hammering nails), this type of noise occurs. Often in such cases, a soundproofing device for the ceiling in the apartment is required.
3. Structural noise. The most difficult type of noise that is difficult to neutralize, they are transmitted throughout the structure. Then you will need a device for complete soundproofing of an apartment or other room, including walls, floors and ceilings.

Soundproofing the walls in the apartment - what you need to consider

1. Purpose of the premises

The use of soundproof materials for living rooms (living room, nursery, bedroom) is not allowed in the kitchen, rooms with high humidity. For them, you will have to buy a material with increased moisture resistance, resistant to temperature extremes.

2. Size and area of ​​the room

In rooms with a large area, it is possible to install sound-absorbing multilayer structures using the frame method - these are mineral wool, Izotex plates. For a smaller children's room, non-shrinking ultra-thin membranes or drywall should be chosen.

3. Quality and texture

The price of soundproofing materials depends on the quality, which is important. The invoice provides for the interior decoration of residential premises, therefore, the composition should not contain toxic substances, formaldehyde, lead, etc.

4. High-quality installation and integrity of the coating

Effective soundproofing of walls in an apartment requires compliance with the integrity of the coating, a very important requirement. All joints, joints are carefully sealed with sealant to avoid reducing sound insulation. You should also make a quality installation of sound insulation to achieve the desired result.

Classification: sound-absorbing, sound-proofing, ultra-thin (soft insulation, hard insulation)

Soundproof panels Fonstar (PhoneStar)

Quite in demand on the domestic market of soundproofing materials are the multilayer panels of the Fonstar system. The structure of the sheets consists of several layers with a mineral granular filler between them. This design and composition delay all sound waves and dampen vibrations.

Advantages:

• Quick and easy assembly when installing a soundproof coating;
• The versatile PhoneStar system is suitable for insulating walls, ceilings and partitions;
• Affordable price.

Disadvantages:

• Moisture exposure is unacceptable;
• Large weight and sheet area;
• A material with a fairly high level of flammability, which limits the scope of the material.

Soundproofing TechnoNIKOL

Very practical thin modern material in rolls. Thin insulation. Well absorbs sound at the device of floors and partitions. Such protection is in demand for interior decoration on walls, thin sheets do not reduce space. On floors, TechnoNIKOL protection does not let in the sound of steps and vibrations of the building structure.

Advantages:

• Ease of installation;
• Protects against air and shock sound waves;
• Neutralizes electromagnetic radiation (even from devices from neighboring apartments);
• Durability, does not lose its properties for 50 years or more;
• Affordable cost.

Disadvantages: none found.

Shumanet-BM

Shumanet-BM mineral slabs are made from basalt fiber. It belongs to modern premium-level materials, despite the low price. User reviews show that the material is fully consistent with its name. Let out production passes strict quality control, at a production stage. One of the few soundproofing materials that can be used with confidence in rooms with high humidity.

Advantages:

• High noise-protective qualities;
• Water resistance;
• Easy installation on any surface;
• High fire resistance;
• Affordable price.

Disadvantages:

There are no obvious cons, except for the unpleasant smell from the newly made material, which quickly disappears.

Tecsound

Eco-friendly, practical new generation noise-absorbing material. It is produced in rolls and is mainly used for walls and ceilings. Soundproofing the walls in an apartment using Texound soundproofing is ideal, because it reduces the area of ​​\u200b\u200bthe room, which allows you to isolate even small rooms.

Advantages:

• Effective noise protection;
• Practicality (fits on different surfaces);
• Easy installation;
• High fire resistance (the material is non-combustible);
• Not afraid of temperature changes;
• Durability. Does not lose its properties for 40 or more years;
• Environmental friendliness of Tecsound is confirmed by certificates and meets high European standards.

Frame soundproofing of the entire apartment - Video

Frameless soundproofing (soundproofing) of walls and ceilings in the apartment - Video

Soundproofing walls in an apartment: common mistakes

In conclusion, we should especially note the frequent mistakes made by homeowners who want to protect themselves from external sounds. When soundproofing an apartment with modern materials, the types of noise should be taken into account first of all.

Manufacturers indicate the sound absorption characteristics of this material. Manufacturers cannot determine the type of sound waves, their nature.

To obtain the desired result when installing soundproofing in an apartment, it is important to choose the right material and install it. It is recommended to consult a specialist before starting work.