A ball of pine cones step by step. Ideas on how to make a topiary from cones and more

So, to make a tree of cones, you will need:
- pine cones,
- wire (we took copper),
- electrical tape (but you can use long and thin strips of fabric),
- plastic bags (packages from “diapers” went into action),
- scissors and pliers
- building gypsum (or any modern building mixture for puttying and sealing gaps, we took Volma),
- "bucket" from under mayonnaise (plastic),
- scotch,
- silver and gold paints in cans,
- PVA glue (we did without it).

Let's start creating a tree from cones (master class with step-by-step photos):

1. Cut the wire into long pieces - according to the height of our tree, taking into account its "roots":

2. We fix the bump on the wire:
- insert the tip of the wire between the scales:

- bend the wire through the bottom of the cone:

- stretch the wire between the scales in a full circle:

- we fix the tip of the wire in the middle of the bottom of the cone, simply by passing it through the wire available there:

3. We got a whole bouquet:

4. Now we create "branches" by connecting the wires of the cones to each other and wrapping them with electrical tape. The more wires we connected, the thicker the “branch” will be:

5. We connect the "branches" into a tree of cones. If the wire is very soft and the branches bend down under the weight of the cones, put a wire or toothpicks folded several times into them:

You can also use a stiffer wire (for example, steel) and wind it along the entire trunk, releasing a piece “on the roots”:
6. Now we need to make the trunk thicker in its lower part. We take a plastic bag, twist it with a bundle and fasten it to the wires with electrical tape:

7. The cone tree is almost ready:

8. Now we need a pot for it: again we take plastic bags, fold them with flagella and attach them with adhesive tape to a plastic mayonnaise jar:

9. Next step: put the tree in a pot.
To do this, first we fold our wire "roots" to the size of the pot, and then fill them with a gypsum mixture.

I prepared the mixture as follows: I poured water into the same empty mayonnaise bucket (a little more than half), then with a tablespoon I began to carefully pour the mixture (“Volma”) one at a time, and stir with the second spoon. Unfortunately, I did not write down how many spoons I poured. The mixture should be similar in thickness to sour cream. If it turned out thicker (“Volma” seizes in a couple of minutes), quickly add water, stir and pour into the bottom of the “pot”. And immediately immerse your cone tree in the mixture:

10. Make some more mixture and gently spread it on the trunk of the cone tree, imitating bark. To increase the setting time of the mixture, add a little PVA to it and mix thoroughly (we did without adding glue). The glue will also improve the adhesion of the mixture to the duct tape so that it won't flake off even if you (or your children) accidentally drop the cone tree.

11. As soon as the mixture completely hardens (after a couple of hours), the cone tree can be coated with paint from a spray can. It's best to do this indoors.

Tip: it is more convenient to install such a tree from cones in a pot together: one holds the tree in a pot vertically (or at the right angle), and the second reports the mixture and “sculpts” the roots and bark.

It remains only to slightly “walk” over the cones with gold paint, so that the cone tree looks more festive (see the first picture for this article).

Even in autumn, while walking in a park or forest, do not be too lazy to pick up some fruits of nature, the same leaves, mountain ash, acorns and, of course, cones. What kind of craft can come out of all this, one can only fantasize, but the fact that a creative person will need all this simple belongings is for sure. For example, you can make amazing things from spruce cones with your own hands. Or not from spruce, but pine, or maybe from the smallest, barely noticeable cones, you decide to make an autumn or winter souvenir?

See how many examples of such works in the photo gallery - this is a topiary made of pine cones, and wreaths on the door made of cones, chestnuts, leaves and acorns.

For a topiary with a crown of cones, you will need materials and tools that can be found in almost every home. But some things may have to be bribed.

Materials and tools:

plastic bottle;
Bamboo mat;
colored paper;
Glue;
Sackcloth;
Styrofoam ball;
cones;
branches;
Spray paint;
Ribbon.

This master class assumes that you will make a pot for a tree with your own hands. You can take an ordinary milk bottle, cut off the neck in it, make the edges even. According to the shape of the bottom of the bottle, you need to make a piece of colored paper, glue it to the bottom with hot glue.

Further MK includes the following steps:

A bamboo rug is needed in order to finally decorate the pot. The mat is cut so that it protrudes slightly beyond the edges of the milk bottle. The rug is wrapped around the cut bottle, glued to it. Using the photo examples, you can take a closer look at what kind of decor is obtained using bamboo rugs.
The decor of the pot is completed by gluing burlap and a bow. A piece of burlap should also be wrapped around the flowerpot, first it is glued, and on top - a thin satin ribbon. Under the tape, you can stick a small branch of mountain ash.
Next, you'll need a styrofoam ball. This point is worth clarifying. Today, every second master class involves the use of just such a blank, which is purchased in needlework stores. It serves as a solid basis for the formation of the crown. But the basis can be made with your own hands. From the old way (a lump of newspaper) to finding the same round small object (a rubber baby ball).
Make a hole in the ball where the stem of the cone topiary will be inserted. These will be branches folded into one bundle.

This point also needs to be considered in more detail. Usually a classic topiary workshop suggests taking sushi sticks, pencils or wire as the basis for the trunk. But this MK says that the branches in the topiary with cones will look more natural.

Topiary from cones: a master class step by step

After you have a pot, a foam base and a trunk of branches inserted into it, it's time to prepare the cones with your own hands. Ideally, if they are small in size and approximately the same.

You can find a separate master class on how to decorate cones. The methods are very different. For example, you can cover them with white paint, then, after waiting for drying, apply PVA glue with a sponge, and sprinkle sea salt on top of the cones. Get such snow cones.

You can paint the bumps with spray paint. What color is better to take, look at the photo. If this is a New Year's topiary, golden and silver colors are appropriate.

Returning to the MK, the actions will be as follows:

Insert a crown ball on a branch into a pot. It can be a vase already filled with earth, or filled with fresh gypsum. As you wish, but the trunk of the branches should sit firmly in the pot.
From above you need to decorate something with earth or plaster. It can be artificial grass if the topiary is still autumn. There you can also throw a couple of miniature maple leaves. You can see the ideas in the photo.
Next, the master class instructs to make a crown. Namely - to glue cones. The elements are fixed with hot glue in a circle. Make sure that there are no gaps, otherwise they will have to be filled with something. Or, initially paint the workpiece with the same silver aerosol.
New Year's topiary involves snow decor. Cotton wool, tinsel, the same sea salt, felt snowflakes, silver threads - you can make the most incredible snowball with your own hands. Or take artificial snow for such a topiary from cones.

The master class offers the following points to choose from. Topiary with cones can be decorated with beads, satin ribbons, voluminous snowflakes, and even Christmas tree decorations.

New Year's topiary from cones (video)

New Year's topiary from cones

New Year's topiary can include literally everything that is associated with the holiday. So, often tangerines become decor for cone topiary. From this, the tree acquires a special aroma, and in the photo you can see that the souvenir looks very festive.

And how to make a topiary from cones even brighter:

Let forest animals “sit down” under the tree, you can also make them with your own hands, or you can take ready-made figures.
The topiary of cones and acorns will look elegantly absolutely white, or white with silver.
New Year's topiary can stand on a sun napkin from your brightest photos of the year. Take twelve photos (according to the number of months), lay them out according to the principle of sunlight, and put a topiary in the center. The whole composition with their own hands turned out!

And next to such a topiary, it can easily turn out to be not quite a miniature squirrel. Moreover, such a squirrel can even supposedly hold a pot with a tree with its own hands. Cute and cozy!

Autumn craft: topiary from cones and chestnuts

A separate master class can not be invented. The actions will be similar, because the work differs only in the presence of these same chestnuts.

And how can you achieve a beautiful decor of chestnuts:

Again, spray paint often comes to the rescue. With gilding and silver - your case.
A scattering of chestnuts can be decorated with dot painting. The same one that paints smooth sea pebbles. It looks very original, the work on such a painting (it doesn’t matter, stones or chestnuts) is almost jewelry.
You can simply highlight the chestnut caps in a different color.

Chestnuts have a smooth structure, try to emphasize it.

Topiary from cones “Green chrysanthemums” (video master class)

Elegant trees - topiaries are beautiful not only in the photo. They look festive, elegant, neat, something good and fabulous emanates from them. Try to do it yourself and you won't regret it.

Successful work!

Topiary from cones (photo)

Creation has ceased to be an occupation only for schoolchildren. There are more and more ideas of combining man-made objects and elements of natural origin. Want to make an exclusive Step by step the process is given below. Read the tips, look at the photos. You will definitely have inspiration, and you will be able not only to repeat the pattern, but also come up with an original idea on your own.

DIY souvenirs

Fashion for handmade things has ceased to be the lot of the elite, but has acquired the character of a trend among all. Knitting, embroidery, decoupage, artistic metal - all this has become available to everyone.

Thanks to the abundance of information and numerous opportunities to purchase any material for creativity, mastering any technique is easy even for a beginner. To create a beautiful thing with your own hands, just be patient, study the instructions, purchase everything you need and start creating.

However, there is one problem. You can buy almost anything, but the price of some art materials is very high. If you want to master budget technology and make original souvenirs from what literally lies under your feet, then the best option is a Tree, an animal figurine, a photo frame, a basket and much more everyone can do without special artistic skills. skill.

Advantages of natural material

Any object that is related to the natural environment is environmentally friendly. It does not contain synthetics, chemistry and other substances of industrial production. This is a significant advantage as it can be used anywhere. Such crafts can be put even in the room of a small child.

The beauty of nature has always inspired people to be creative. The same applies to natural materials: dried leaves, flowers, collected cones, nuts, twigs. In nature, everything is subject to the laws of harmony and beauty. By adding a little man-made energy to the collected material, you can create, for example, a cone tree of amazing beauty and grace. How to make such a craft will be described below. If you have a rich imagination and your imagination works well, you yourself can come up with as many original souvenirs as you like. And for motivation, you should look at ready-made examples.

decorative tree

Making souvenirs is a very exciting process. It's always nice to see the fruits of your labor. In order for a gift not only to please the eye, but also to have some kind of sacred meaning, you need to choose the right object that you will create and give it the appropriate idea.

From this point of view, a miniature cone tree can be an excellent souvenir. It's very easy to do it step by step. Such an object will symbolize life, happiness and prosperity. If you add decorative elements to the souvenir, such as coins, hearts, bows, you will get a symbolic money tree or a tree of love and good luck, etc.

It can be absolutely any form. As a basis, you need to find a suitable branch or snag. It should be fixed in a solid base so that it holds firmly and does not fall, even taking into account the future weight of the cones. There may be few of them - it all depends on the size of the souvenir itself. For a desktop, a couple of dozen or less will suffice. It is important to nicely place the bumps on the driftwood so that it looks natural. Use the color of the elements in natural or paint in gold, silver, white, pink or any other according to your idea.

The components can be glued together, but there is a second option. The wire is taken, cut into pieces of the desired length. Each element is fixed in a cone. Branches are woven from the resulting "bouquet", and the stem is fixed in a solid base. The frame is wrapped with decorative tape, beautiful fabric or paper. The product can be supplemented with beads, bows or anything else.

Christmas tree made of cones

On New Year's Eve, everyone tries to decorate their office desks with small Christmas trees. You can make a Christmas tree from cones. How to make it? Very simple.

The process of creating a souvenir will be as follows:

You make the base of cardboard in the form of a cone with a bottom.
For stability, fill the inside with crumpled paper, newspapers.
Install the resulting structure on a solid foundation and fix it there.
It is better to paint the frame in the color in which the Christmas tree itself will be presented (green, white, silver, gold, brown, if the product retains its natural tone). This is done so that the gaps between the cones are invisible.
Sort the collected cones and start gluing them in rows. Place the big ones on the bottom. Moving towards the top, try to choose smaller ones. It is best to attach them to the base with a thermal gun. It is a device in which special glue sticks melt under the influence of heat. Through the nozzle, the viscous composition enters the junction of two objects. This is a very versatile device. In our case, it is convenient and gives the most reliable result.

So, making a Christmas tree or any other Christmas tree from cones is very simple step by step. When the design itself is ready, it can be painted, decorated with beads.

Pine cone topiary

Nowadays it is a very fashionable souvenir and a nice gift. It is made from ribbons, coffee beans, beads, balls, pebbles, shells. This object resembles a beautifully trimmed ball-shaped dwarf thuja in a pot.

It is also easy to create such a decorative tree from cones step by step. The sequence of actions will be as follows:

This is how easily and quickly an original tree is created from cones. The master class, which is given here, will help you realize this idea yourself. By the way, you can first make the whole base, and then decorate it. Everyone does as he pleases.

Souvenir from fir cones

Do you want to surprise with an unusual idea? Make a spruce topiary. A tree of happiness from cones will perfectly decorate your table in the office or become an original souvenir for a friend. The principle of execution is the same as in the previous version. The difference will be in the shape and fastening of the elements. They can, like the rod, be cut to a shallow depth inside the base sphere and glue the joint.

Craft from painted cones

Such a souvenir will look original, made not only in a single color, but also in a multi-colored version. To do this, you will need to prepare paints in advance and paint the elements. Children will be delighted. They like to create crafts from cones. A tree, and even a multi-colored one, will seem wonderful and fabulous to them. Turn a mastery lesson into magic!

If you make a Christmas tree from pine cones, painted specimens can play the role of bright toys. In the case of topiary, you can simply make color transitions by gluing rows of different-colored elements from bottom to top. At the trunk - for example, white, in the middle - a couple of shades of pink. Great gift idea for Valentine's Day. Such a thing will look cool if you add it with a cute ribbon, bow or heart.

Christmas crafts: cones

It is always much easier to work with instructions or a ready-made sample. However, if you apply your imagination, souvenirs can turn out to be even more original. If you need to make a lot of beautiful gifts, and time is short, the easiest way is to use the idea below.

Collect the required number of large spruce cones.
Color them green.
You make an imitation of white snow on the branches.
Fix each cone on a solid base.
Lubricate the gaps between the scales with glue and sprinkle them with beads, colored groats, beads.

So easily and quickly you can get a lot of small decorative Christmas trees!

You have seen how easy it is to make a tree out of cones. A master class in the form of tips, supplemented by illustrations, will be your starting point in the creative process. Arm yourself with inspiration, be patient and start creating beauty with your own hands.

Today, as a craft in a kindergarten or school, you can make a topiary from cones. This craft has replaced the already familiar little man made of cones, which our parents also made. The main advantage of a topiary with cones is that such a craft is relevant in winter and autumn, the materials are available, it does not require much effort and special skills to create it. In addition, you can use different cones, as well as supplement them with leaves, chestnuts and other decorative elements, which will give each craft individuality and originality.

Step by step guide for beginners

To create a topiary, you can use the products of any coniferous trees, that is, the “tree of happiness” comes out well from both pine and spruce cones. And since the cones are a product of nature, finding them in the required quantity is not difficult.

We offer you to initially master the general technique of cones with your own hands. To do this, you will need the following materials and tools:

cones of coniferous trees;
foam base or old newspapers;
thermal gun with silicone glue stick;
a solution of gypsum or alabaster;
dishes for crafts (flower pot, vase or cup);
curved strong branch for the trunk;
threads;
aerosol can with gold paint.

After preparing the necessary things, you can begin to consider the process itself, how to make a topiary from cones.

First of all, it is necessary to select cones of the same size. If there is a ready-made base for crafts, you need to insert a branch into it, fixing it with glue. In another case, when there is no ready-made base, a great solution is to create a papier-mâché ball from old newspapers. To do this, crush the paper and pour it with a mixture of hot water and laundry soap. When the newspapers begin to swell, they should be made into a ball, and then left to dry.

Next, we warm up the gun and, lubricating each cone with glue, quickly attach it to the base of the topiary. Photo 1 shows how to create a topiary from cones step by step. Alternately fixing the cones to the ball, you need to try not to leave empty spaces, while it is important not to overdo it with glue.

Now you need to fix the barrel in the prepared vessel. This will require a solution of gypsum. It can be made by diluting dry building material with water at room temperature to the consistency of liquid sour cream. The barrel must be installed exactly in the vessel, and then poured with a solution of gypsum, not reaching the top about 1 cm.

It is also recommended to pre-place a piece of thin wire or crumpled foil in the vessel in order to compensate for the deforming stresses when the gypsum solidifies. When the plaster hardens, you can decorate it with threads or other elements.

At the end, the tree should be treated with gold paint. Topiaries can be decorated with semolina, thus creating the effect of snow-covered cones. This completes the general master class, additional decoration of the craft is at the discretion of the author.

Making a topiary from cones and acorns

polystyrene to create the base;
tree branch - for the trunk;
flower pot stand;
mounting foam;
stones;
pine cones;
decorative moss;
acorns;
dry oak leaves;
leg-split;
additional decorative elements.

Let's start creating an autumn topiary by preparing a stand. To do this, you need to fill the pot with mounting foam, after placing several stones on the bottom. After all, if the pot is light, even with foam it can tip over.

The prepared tree branch should be decorated with twine so that the bark does not shine through. Now let's start decorating the crown. First, it is better to glue large elements - bumps. After that, fix the acorns with super glue, closing the voids as much as possible. The remaining places are filled with oak leaves. The only thing you need to leave empty is the place for attaching the barrel.

Now we assemble the structure. Since the trunk is already inserted into the pot, it remains to glue it to the crown, carefully lubricating all the joints with glue. We decorate the bottom of the pot with decorative moss and dry leaves. You can use beads and treat everything with gold paint from a balloon. As you can see, cones and acorns topiary is made quickly and easily.

Another version of the autumn crafts

In the autumn period, the topic of creating various crafts is especially relevant, because they are required in kindergarten and school. Therefore, we suggest that you familiarize yourself with another master class that will teach you how to make a topiary from pine cones and. To do this, prepare the following materials and tools:

flower pot;
spherical base;
polystyrene, polyurethane foam, gypsum or other material for attaching the barrel;
pins;
chestnuts, cones (not only pine cones), acorns and leaves;
glue gun;
decorative moss;
branch or any stick;
other decorative items.

First, you should prepare all the materials for the topiary from cones and chestnuts: select whole and identical cones and chestnuts; paint the stick or wrap it with a rope; make a ball if there is no finished shape. Next, insert the barrel into the base, fix the attachment point with glue. It is recommended to paint the base brown so that there are no gaps in the crown of the craft.

Dilute the mounting mixture or gypsum according to the manufacturer's instructions and fill the pot with this mass, not reaching 2-3 cm from the edge. Now we insert the barrel into the center and fix it until completely solidified.

We heat up the glue gun and start gluing decorative elements. MK involves gluing first of all large elements, and then the voids are filled with small objects. You can do this with both pins and glue. At this stage, you need to insert the pins into the base so that the cones, chestnuts and other decor are located as close to each other as possible, but maintaining the round shape of the crown. If the voids are visible, they can be closed with the help of leaves.

In conclusion, we glue the decorative moss to the “soil”, and tie a ribbon in the form of a bow on the trunk. The resulting topiary from chestnuts and cones will definitely be appreciated when handing over to a kindergarten or school.

Creating a New Year's Tree of Happiness

On the eve of the New Year holidays, the owners want to decorate their home with various themed decorative decorations. For such purposes, a small New Year's topiary made of cones is perfect. To create it you will need:

pins;
plastic cup;
glue;
scissors;
tourniquet;
Styrofoam;
rowan and cones;
bast bast, leaves or dried flowers;
branch;
crepe paper.

Such topiaries are assembled in 3 stages.

Let's make the base first. To do this, cut out the base from the foam, the diameter of which should be equal to the diameter of the plastic cup. After we insert the workpiece into the vessel. The base can be made from other containers: a tin can, a pot, a cup, etc.

The role of the trunk will be played by a tree branch, only it will need to be wrapped with a bundled rope, fixed at each end with glue. Next, use glue to connect the trunk to the base and crown. It remains to attach decorative elements.

Initially, the crown should be wrapped with orange paper, tying it at the base with a rope. The same must be done with the container where the craft is inserted, only green paper should be used for it. After that, we take rowan berries, string them on pins and hook the resulting blanks into the crown of the tree. You should move from the middle clockwise, leaving no empty space between the berries. It should be borne in mind that when using fresh berries after a while they will lose their original appearance, so it is better to take pre-dried mountain ash. Next, we are engaged in attaching leaves, cones and dried flowers. If after that there are empty spaces left, you can close them with the help of leaves of other trees / flowers, coffee beans, ribbons and pieces of cloth. At the end, you can sprinkle the tree with sparkles or spray paint. The appearance of the topiary from cones photo 2 shows.

08.12.2018 by

Topiary made of cones is considered a stylish and fashionable decoration for the home. You can make it yourself, which means you can give part of your soul to create comfort.
The round shape of the topiary has been known since the creation of the gardens of Babylon, where shrubs and trees were given bizarre round shapes. The development of the art of gardeners continued in the gardens of Japan and Versailles.

What is a topiary made of?

Nowadays, the European tree or the tree of happiness is made from various materials of natural and artificial origin. It can be coffee beans, acorns, chestnuts, pasta, nuts, cinnamon sticks and others. Regarding the form, it depends on the imagination of the manufacturer. The most common option is a ball, but a cone, a heart, a number do not go far from it.

Topiary from cones is considered one of the simplest and most spectacular. Material for creating a decorative element can be found in any city, even a metropolis. Even talented children can cope with the production scheme. And the structure of the cone turns the decoration into an original design step. The trunk for the topiary is made of branches, thick wire, tubules, or a combination of different materials.

Decorative topiary is an artificial low tree, according to popular beliefs, capable of attracting comfort, warmth and well-being to the house. The classic version of the decoration consists of five main elements:

The base ball, on which the crown of the product is attached. It is made from newspapers, polyurethane foam, a balloon or polystyrene. In needlework stores, you can buy ready-made plastic blanks.
Crown, which is considered the main element of the topiary. The choice of materials depends on the imagination of the needlewoman. It can be coffee beans, cones, acorns, Christmas balls and even candy.
trunk. It can also be made independently from cardboard, pencil, twigs. The main thing is that it looks like a tree.
pot. The tree of happiness should be fixed in a flowerpot, glass or jar so that it does not fall. Here, too, everything depends on the imagination of the master. Even an ordinary plastic cup can be turned into a work of art.
decorative elements. To hide the gaps between the main materials and decorate the craft, use the original beautiful decor. For example, the trunk can be decorated with ribbons, and beads, flowers, leaves can be added to the ball.

Topiary needs care, like any element of the interior. If we create it with our own hands, it is especially dear to us, so follow the rules of operation:

keep from mechanical damage (do not let the child play, do not drop);
hide from direct sunlight so that the product does not burn out and does not lose its color;
dust regularly using a soft brush or hair dryer (not high power);
do not wet, otherwise the glue will no longer hold the decorative elements;
if coffee beans are used in the design, to reveal a wonderful aroma, you can wipe the base ball with a damp cloth;
do not store near heating devices, so as not to overdry the product, which leads to its fragility.

Advice! The crown of the tree of happiness can be made from any materials, ranging from paper flowers, Christmas tree decorations, to money, threads and natural materials. Don't be afraid to experiment to create a unique original composition.

Preparatory work

On the eve of the New Year holidays, it is important to decorate the house not only with Christmas decorations, but also with fresh fragrant cones. When choosing material for crafts, pay attention to the fruits of pine, spruce, cedar. However, the products of other coniferous trees will also be an excellent interior decoration.

To complete the tree of happiness, you need the following materials:

cones of any coniferous tree;
thermal gun equipped with silicone glue sticks;
polystyrene for the base (ball);
old newspapers;
decorations for the trunk, pot and ball (ribbons, beads, buttons, moss, artificial or dried flowers);
gypsum or alabaster (the second dries longer);
ceramic dishes;
materials for creating a trunk (wooden stick up to 45 cm);
paint can;
threads.

To make the tree of happiness neat, you should sort the cones so that only the same size remains. Also, do not forget to rinse freshly picked cones in water and dry well in the oven for 10-15 minutes.

The oven temperature should be 350 degrees. Check for insects. They should not be in fruit.

If you are using Styrofoam as the basis for the European wood ball, make sure that the trunk is firmly attached to it. But it is better to choose old newspapers or papier-mâché. The paper needs to be crushed, placed in hot water and add shavings of laundry soap. After the material swells, it is easy to make a ball out of it. True, before decorating, you need to dry it well.

For a base that completely holds the finished structure, it is recommended to choose one of the mounting mixtures. It can be a cement-sand mortar, gypsum, alabaster or putty. Floral foam or polystyrene is also suitable. The best option is alabaster, as it does not crack, it is bred quickly and easily and is available in every hardware store.

To fill one medium pot with alabaster, you need to thoroughly mix 1 kg of the mixture with three glasses of water. When the consistency of thick sour cream is obtained, the mixture must be poured into a pot. The barrel is installed immediately, it must be kept in one position for 2-3 minutes. The substance dries in 12-24 hours. Only after that you can decorate the pot with cloth, beads and other improvised materials.

Advice! To correct the shape of a sloppy newspaper ball, wrap it with thread.

Making a topiary with cones

When the preparation process is completed and all the materials are collected, you can proceed to the design of the topiary. If you follow the instructions, you can highlight the following steps for completing a decorative element:

Make a trunk out of a wooden stick. You need to cut off the height you want, given the size of the pot and the diameter of the ball. It can be painted, wrapped with ribbons or left as a tree.
The barrel must be inserted into the ball and tightly fixed with glue. If the ball is based on foam, then the hole for the barrel must be made in advance.
Paint the balloon with dark brown paint to mask the gaps between the bumps.
The pot is filled with alabaster so that it does not reach 2-2.5 cm to the top edge of the container.
The trunk must be placed in the center of the pot. If there is alabaster inside, wait until it dries. If there is floral foam, much less time is spent.
Heat up the heat gun, apply a small drop of glue to the bump and quickly glue it onto the previously prepared balloon.
Consistently repeat the procedure and carefully fix the lump on the base of the bump. Try not to leave empty spaces, and the glue is not visible under the cones. If they are of different sizes, try to fix large cones first, then medium and small ones. In the case of the same size, it is best to place the cones according to the honeycomb principle.
The base in which the barrel of the product is attached should be decorated. Dry moss is great for this. To keep it always in place, use hot glue.
Decorate the topiary. You can use ribbons, beads, spray paint and other accessories.

The procedure for making a topiary with your own hands does not take much time. But you will decorate the interior of the house with a unique author's thing. Therefore, feel free to go to the nearest park for cones.

Advice!As a stand for a topiary, you can use a glass jar, a cup or an ordinary glass decorated with a cloth.

Autumn decor: original ideas

In autumn, you can use many natural materials for crafts and decorations that you can make yourself. The most popular are cones, acorns and seasonal dried berries. To bring some warmth into the house during the cold season, create your own autumn topiary. To do this, follow the step-by-step instructions:

Prepare materials for work. You will need a straight branch for the trunk, twine, beads, a glue gun, a stand and bronze paint. The main details are acorns with caps and cones.
Make a tree ball out of styrofoam or newsprint.
To make a trunk, wrap a dry branch with twine.
Connect the finished newspaper ball and the barrel. Install the structure on the stand.
Proceed to the design of the crown of the tree. To do this, glue beautiful cones and whole acorns on a pre-prepared ball.
After the glue dries, treat the decorated ball with bronze paint.
Place corrugated paper between the acorns and cones.
You can add beads, decorative fruits and autumn berries to the composition.
You can decorate the pot on top with dry moss or a beautiful cloth.

Remember that the topiary is called the tree of happiness. He brings peace and prosperity to the house. Therefore, when creating it, there should be only bright good thoughts. A positive attitude charges the jewelry and gives it a special power.

Advice! When using acorns to decorate the topiary, do not overdry them. In this case, they will crack and the fake will deteriorate.

New Year's topiary - the best home decoration

When choosing a gift for your loved ones for the New Year, do not forget that things made with your own hands are most valued. They keep the warmth and tenderness with which we create. Topiary from cones is no exception. It can be decorated with Christmas tree needles, rain, Christmas balls and other elements that give a festive mood.

To create a New Year's topiary, prepare in advance a flower pot, unnecessary newspapers, threads, and a plastic tube. Glue should be of two types: PVA and Super (if there is no pistol glue). To fix the structure, choose gypsum plaster or alabaster. To decorate the composition, do not forget to collect pine cones, prepare white and golden water-dispersion paint, sisal, organza, synthetic winterizer, large pearl beads, toothpicks, scissors, an awl and a brush.

Step-by-step instruction:

Make the base of the topiary. Dilute gypsum plaster with water to the consistency of sour cream in a special container. Fill the flower pot with the mixture and insert the plastic straw as a stem. Paint with golden paint.
Make a ball out of old newspapers and wrap tightly with thread to make a ball.
Make a hole in the ball for the barrel, drink glue there and put the tube into the newspaper ball.
Cover the ball with padding polyester and tie tightly at the base.
Sort the cones, wash, dry and paint with water-dispersion paint. After drying, decorate the cones with a golden sheen.
Make holes at the base of the cones, and use glue to plant them on toothpicks.
Pearl beads are also fixed with glue on toothpicks.
Organza and sisal cut into square pieces. Roll the sisal into balls.
Start decorating the ball. In a free order, make holes in the ball with an awl and thread cones, elderberries, sisal balls in turn. Fold the organza several times and also use as decorations.