Garden benches - Beautiful varieties for your convenience (80 photos). Do-it-yourself garden bench: we use drawings to make a wooden bench

And the point is not even that it is very convenient and functional, but that the garden bench has always been almost the main element of decorating the backyard. In order for the bench to fit perfectly into the overall look of the garden and at the same time retain its functional affiliation, it would not be out of place to consider this item of “garden interior” in some more detail.

garden bench materials

Modern benches are made both from classical materials - wood, stone, wrought iron, marble, and from more modern ones - plastic, synthetic fiber. Often benches can be made simultaneously from two or more materials - stone and iron, wood and glass, forged steel and wood. The style in which this item is made depends on this. And this means that it is necessary to select a bench for the garden, taking into account its stylistic features. For example, a bench made of stone or forged steel and wood will fit perfectly into a classic-style garden, and a plastic bench will look great on the lawn in front of a modern-style cottage.

But still, the most popular material used to make a garden bench is wood. In particular, teak is most often used. Teak wood has always been used in shipbuilding as it is very resistant to moisture. In the open air, a gray coating appears on teak furniture, which is easily removed with a soft brush. In addition, teak furniture must be treated with teak oil, which comes with the furniture - this way the furniture will last for many years.

Manufacturers of garden furniture often do not limit themselves to the production of benches only, but also produce entire ensembles of garden furniture. In addition to benches, it includes a table, chairs, swings, chests for storing pillows - and all this, made in the same style, will be an amazing decoration for any garden.

Where to put a garden bench

If it is planned to put only single benches in the garden, then be sure to put one bench at the porch - this will be a wonderful sign of hospitality, and if you put another bench somewhere in the depths of the garden, under a spreading tree, then this place will become a wonderful place for solitude and rest in silence.

Of course, the bench, first of all, plays a functional role. Therefore, it is worth paying special attention to its dimensions. For example, if the bench is installed in the part of the garden where family barbecue gatherings take place, then the bench should be long there, or several small benches, so that all family members and guests can comfortably accommodate. But if we reject the truly functional purpose of the bench, then you should pay attention to the psychological aspects of its use.

According to psychologists, sitting together on a bench can reconcile quarreling spouses, make friends with a pleasant interlocutor. And the secret of this is that when people sit on a bench, their eyes cover the same landscape, they breathe the same air, their thoughts and feelings gradually begin to flow in the same direction.

Garden benches - photo

But as for the shape of the bench, now there are a lot of them and you can choose any one to your taste. Let's say there is a huge sprawling tree with a wide trunk growing in the garden. A round bench can be installed around it so that those sitting have their backs to the tree trunk. But if you build a beautiful round flower bed or a small fountain, then a round bench will also fit perfectly there, only those sitting will already be facing the center of the composition. Round benches are very convenient because they can accommodate a lot of people, while not taking up much space.

Anyone who has installed a bench in his garden, or even several, can say with confidence that he has received another unique room, a cozy corner of his house, where it is always pleasant to relax and spend time with loved ones. The only difference is that this corner is in the open air.

DIY bench around a tree

A bench with several seats can be a logical end to a flower bed or surround a tree in the garden. A couple of days of work - and a new vacation spot is ready!

For work, you will need patterns of decorative details, you can use our option or independently develop a form. The presented bench is suitable for trees with a trunk up to 45-50 cm thick!

The pattern for the trim strips is based on a 5 x 5 cm grid. Draw the cages on the tree and then draw a smooth line.

1. The shortest board of the seat is made with a special recess so that the sloping backrests exactly adjoin it. To do this, on a part that has already been sawn off at both ends with a 60 ° bevel, attach two rails as a guide for marking. The rail superimposed on top should be the size of the back, the second rail serves only as a support.
2. Starting from the back corner, mark the thickness of the back (3.5 cm).
3. Since the angle of the backrest is 100°, it is necessary to check the notch with the angle of the part.
4. Use a carpenter's square to mark the 100° angle as shown in the photo. Then cut out a complex "wedge" with a hacksaw.
5. A board with two rails will serve as a template for mounting the seats.
6. To ensure that all six seats are the same, refer to the template.
7. For decorative strips, you will need a grid template with which you can process all six boards.
8. Drill the holes with a Forstner drill.
9. Round the edges with the top cutter.
10. Mount the back.
11. Coat the parts with a protective wood primer and paint them with enamel.

Garden bench - photo ideas

Items of garden furniture are necessary to equip a place to relax at your summer cottage at your discretion. Photos of benches in the garden look attractive. Any master can make such furniture himself.

First you need to decide on the choice of material for the future product and choose the right design solution.

Work materials

Garden bench can be made from various materials. Each of them has its own advantages.

Plastic bench

This piece of furniture has many advantages. Plastic products are affordable, they do not require special care, they are easy to disassemble and assemble. Today, plastic is presented in rich colors.

However, there are also disadvantages. A plastic item looks cheaper than a wooden item. Under the influence of direct sunlight, it quickly fades, and its surface may be deformed.

Wood for garden furniture

To make original benches for summer cottages, craftsmen often use wood. Wood is easy to process, the material looks noble, and installation does not take much time.

The main requirements are the absence of defects and good drying.

stone products

The naturalness of the material is its undeniable advantage; it attracts with its natural beauty. In finished products, it looks luxurious and stylish.

Natural stone items are easy to make with your own hands. However, the material has not only advantages, but also disadvantages:

• It is unhealthy to sit on a cold stone.
• The bench is installed exclusively permanently.

What about metal?

Metal benches are a great decoration for a recreation area. The cold forging method, like the hot forging method, allows you to create beautiful designs.

In addition, metal is perfectly combined with glass or wood.

What should be the ideal shop?

Among all the requirements, the main ones can be distinguished:

• Comfort. The bench needs to be ergonomic. A bench with a back is a good option.
• The product must be capable of withstanding heavy loads. The master needs to choose only high-quality materials and accessories.

Bench design features

A summer resident who wants to ennoble the landscape around the house should know how to make a bench with his own hands. You must first determine the dimensions.

Dimensions - 1.5 mX0.4 m, height - 0.45 m (seat) and 900 m (back). The back is made at an angle of 18 or 20 degrees. It is important to correctly execute the drawings of the bench, then the work will not argue.

The master will need to prepare the following:

• Primer, varnish;
• Special sandpaper for wood;
• Screwdriver;
• Electroplaner;
• Electric jigsaw;
• Self-tapping screws 40X40;
• Blanks for front and rear legs, as well as for backrest holders;
• Wooden boards with dimensions 1500X150 and thickness from 35 mm to 40 mm.

Making a wooden structure with your own hands

It's good when you can find boards with the right dimensions on the market.

When there was no suitable option on the construction market, the master will have to arm himself with a jigsaw in order to cut the material himself. A miter saw will help speed up the process.

Note!

Finished blanks must be processed. The surface of the boards for the backrest with the seat needs to be sanded. The ends are processed using an electric planer, the best option is to make them with a rounded shape.

The next step is to give the required angle of inclination, in this case we are talking about the rear legs of the bench. These elements serve as a framework. Marking is applied to the prepared parts.

We measure the height - 0.4 m. It is necessary to make a cut equal to 20 degrees to form the angle of inclination. Between the legs of the bench in front and behind the distance should be 0.28 m. A beam with a size of 0.5 m connects the legs. It is better when the strapping is performed not only from above, but also from below.

The sidewalls are connected as soon as the assembly of the main parts is completed. The boards are fastened with self-tapping screws to the strapping bars that are on top. Between the blanks leave gaps to remove moisture.

When mounting the backrest, the board that comes first is attached at a distance of 0.2 m from the seat, and the second - 0.38 m.

Note!

You can proceed to the final coating of the product. For this, impregnation with varnish for outdoor use is used. Such means will help to provide reliable protection against any harmful actions from the outside.

How to create a metal structure?

A master can create a comfortable place for a recreation area using the cold forging technique. It is better to start with models that have angular shapes, they are easier to make.

Detailed instructions

We determine the dimensions (length - 1.5 m, height - 0.8 or 0.9 m, width - 0.4 or 0.5 m).

We make blanks for the frame from a cut pipe. It will be necessary to prepare 2 segments with dimensions of 0.4 m and 2 more fragments of 1.5 m each. We connect these parts into a rectangle and weld them. To make the structure more durable, we weld 2 stiffeners.

To make blanks for the legs, we cut the metal pipe into 4 parts, the length of each should be 0.4 m. The blanks are attached to the corners of the bench. To reinforce the legs, stiffening ribs are additionally installed.

Note!

For the manufacture of the back you will need 2 blanks. The length of one should be 1.5 m, and the other 0.44 mm. We weld the blanks for the back together and weld to the seat. We must not forget about the angle of inclination. For the rest to be comfortable, it must be at least 15 or 20 degrees.

The backrest can also be reinforced with stiffeners.

At the last stage, the seams are cleaned. The surface of the frame is coated with a primer.

If you plan to make a product with figured elements, then the implementation of such a task will require more time.

DIY shop photo

Good afternoon, today we will make a variety of benches with our own hands. I collected in this article all the SIMPLE WAYS make yourself a comfortable and beautiful bench. I will give detailed explanations and demonstrative photos, and tell you as clearly as possible how to make a bench. wooden(beams and boards) and improvised materials(pallets, pallets, old chairs, boxes, etc.). I will also give drawings, assembly diagrams, and step-by-step master classes.

I will lay out all the assembled models of country benches according to their complexity - that is, we will start with the simplest and most concise methods - and end with real professional products worthy of the hand of a master. After this article, you will feel that you have become the very master who knows a lot about his business and can easily make a bench from absolutely any material, even if there is not much of it. And the bench will stand firmly on its legs and serve your family for years. And who knows, maybe you can even sell your benches to your neighbors - after all, they will also want to have such country benches on their site. And later you will start doing it, too, according to my articles-lessons.

In this article, as well as in the following articles in this series, we will look at ...

1. benches made from old chairs.
2. Bench chaise longue in French style
3. Beautiful benches made from bed headboards.
4. Master class of an elite bench from a chest of drawers.
5. Country benches with a back - from timber and foam blocks.
6. Benches for giving - panel with support on a solid sidewall.
7. simple drawing edged board benches - in 15 minutes.
8. Country benches with a curved side.
9. Slatted benches for giving - with a curved shape of the seat.
10. Benches with backrest and armrests - 23 models.
11. benches under a canopy or classic pergola.

So, let's figure it out. And let's start with the SIMPLE WAYS to make a country bench with your own hands.

Model #1

Bench for giving

FROM OLD CHAIRS.

Here in the photo below we see an original and very simple bench - which is easy to make with your own hands from unnecessary chairs. Everyone in the country has old shabby chairs. Once you left one chair in the rain, the varnish coating on them was swollen, the soft upholstery had long since spread into shaggy holes. It’s a pity to throw it away, you put it against the wall of the garage or in a shed - and it continues to deteriorate. Then another comrade chair was added to it - but it is still nothing, and you keep it on the summer veranda. And sometimes you see shabby chairs with a warped leg at the entrance (someone took it to the trash).

All these old robbers can be given a new valiant life. Paint them in a daring juicy color. And cover with a wide board - fasten it onto self-tapping screws (so that they hold on to the leaky bottom of the chair, it can be strengthened with a wooden overlay). Or screw not to the bottom but to the frame of the chair.

By the way, if you don’t have old chairs, it’s NOT a problem. Go to any flea market site - they sell a lot of old chairs for mere pennies. They are happy that they sold it. You are lucky that you found it.

If wooden chairs will have different seat heights, this is easily solved by filing the legs of high chairs (or stuffing additional thick boards onto the seat frame of a low chair to raise the seat to the desired height.)

Chairs can be connected not only in the seat area - but also along their backs. Here on a step-by-step master class for making such a bench (photo below), we see how it is done:

• The attachment points along the rear line of the seat are a long wooden plank.
• The attachment points along the front line of the seat are a screed with screws (or just a butt, which is held due to the fact that the back bar prevents the chairs from dispersing).

We attach the side rails of the bench. We cut out corner groove on the handrail so that it fits into the frame of the chair back.

We sand the varnish coating from the chairs (we prepare them for painting). We prime before painting - a special primer for wood. We impregnate with a moisture resistant coating.

And attention - we add elements of strength. Bottom and top between the backs of the chairs - we nail short wooden planks-holders. They will unite the backs of the chairs - into a single common back of the country bench.

Cut out the board for the seat. Please note that special square cuts are made in it (so that the high “humps” of the chair legs pass through them.

This is how we get an elegant garden bench. It can be placed on the lawn of the garden in a place with a table - under a canopy, in a recreation area, on a veranda or terrace. And for the winter and rainy season to bring into the house.

And here is the idea of ​​​​how you can arrange chairs DIFFERENTLY under our future bench in the country - WITH A ROUND.

And you can also make a round garden bench around your favorite tree or lilac bush in your country house - also from chairs set in a circle with their backs.

Even if you found only 2 chairs at a flea market, you can still make an original bench with them - which only you will have.

Moreover, one exclusive idea is still hiding here - just for TWO chairs.

Here in the photo below we see how exactly from two old chairs you can make an elegant one with your own hands french bench.

In the photo diagram below, we see a master class - where it is shown how two backs from chairs - become side elements of the garden bench frame.

• First we do quadrangular seat frame(light wood in the photo below) - even scientifically it is called TsARGI (frame elements under the chair seat, or under the tabletop). We nail this frame to the lower bars of the chair back.
• And then, so that our bench does not sway back and forth, we make an additional coupler frame already in the lower part of the legs of the future laochka-goat. Scientifically, such a screed frame at the bottom of the legs is called a PRONG FRAME.
• We paint the entire product white and get a solid French bench for a beautiful holiday in the country.

If desired, a backrest can be attached to such a garden goat bench. Just nail to the side surface of the board chair frame. How it is done in the photo below.

Model #2

Country benches

FROM AN OLD BED.

And here are ways to create a beautiful bench for giving using backrests from an old bed.

One back is sawn as is in half. The halves will be used as side elements of the country bench.

Even if the back of your bed is not made of a solid shield, but is decorated with carved balusters, you can still make a bench according to this scheme.

The seat can be covered with a solid wooden shield. Or upholstered with boards-rails as in the photo below.

The second headboard can be used under the FOOT of the bench- from the front edge. How it is done in the photo below. The bottom frame of the bench can simply be paved with an edged planed board and painted. Or you can cut out a solid shield and put it on top of the frame.

You can use only one back to create a bench.

You can make a FRESH FRAME from a cut board for a country bench.

Or the frame for the seat - the frame of the bench - can be taken from the same material as the frame frame of the bed. How it is done in the photo below.

And pay attention. Here, part of the bed frame is PUSHED ON THE TOP - to increase the level of the seat.

A beautiful country bench can be made even using modules from any other furniture. For example from an old buffet. Let's say you have a sideboard, part of which is not subject to restoration (drunk guests fell and broke through the line of drawers).

Then fate itself tells you to make an exclusive bench out of it. Unusual to beat the rest of the buffet. And create a cozy corner for family privacy.

And you don't want to put this designer bench out in the rain. You will find her a place of honor in your country house. And sew for her blue pillows with embroidery of snow-white patterns.

Model #3

SHIELD garden benches

OWN HANDS.

To immediately explain the term "panel board" - I'll show you such a simple design - a mini-shop from cutting kitchen boards. This is the classic shield bench design. That is, the product is ASSEMBLED FROM SOLID SHIELDS.

In the photo below, the shields are connected in a groove way. The board-seat rides into the grooves on the legs-racks.

Below, the bench is made EXACTLY THE SAME - using the shield method. Only the material of the shield is more coarse and unhewn. And here they added a back - it was also cut into the grooves cut in the support shields.

• The fastening of the shields to each other can be GROOVE (as in the photo above) - where in one shield grooves are cut, and other shields enter the bottom. Such fasteners are used only in panels made from a SINGLE PIECE of WOOD. Glued boards are not suitable for this - they can delaminate in the places of their gluing.
• Also, for fastening, ADDITIONAL FASTENING ELEMENTS are used - wooden(tsargi, corner braces, prolegs), metal(corners, staples and perforated plates).

Village shops are made using the shield method. 2 side shields (these are legs) - are interconnected by a long board (this is a proleg). The board can be located in the lower part of the midsole, or in the upper part of the midsole - immediately under the seat board. In the photo below we see both of these ways of arranging the proleg under the bench.

As you understand, the shields you work with are not required to have the correct shape. It may be fragments of an old gnawed board - in which you carved flat lines support for SEAT AND BACK REST.

In the photo below, a one-piece shield plays the role of a support for both the seat board and the back board.

Here is the same principle - a solid support for the seat and back of the country bench.

And this beautiful white bench for giving is made according to the same principle. Only already from exactly sawn shields and painted.

Below we see a panel model of a bench with a back, where already 2 shields play the role of a support for the seat and back.

And these supporting SIDE PANELS are made at a slight angle of inclination. And so the bench turned out to be a seat with an inclination inward and a slightly reclined back. It is very comfortable to sit in such a bench.

And agree to do it, it is very easy to cut out such a bench with your own hands. Here the drawing does not have to be exact. Just do it to your liking. Easy sidewall angle choose by eye.

• Side lean back - in the form of a long triangle (choose the angle of inclination yourself).
• Foot support for the seat - in the form of an elongated trapezoid (can be with or without tilt).
• A piece of thick timber is smoothed under the foot supports - so that the bench has a height. But if you have a wide board, then the legs will turn out higher at the bench, then it is possible without beam supports

All parts can be planted on ordinary nails.

To keep the bench from being so low(if you wish) you can make the footboards higher - put together several pieces of timber at once - put them on top of each other with a turret and fix them on the inside with a board (to keep everything together) or without a board just on nails.

And also such a bench can be PUT ON LEGS - also in the form of elongated trapeziums. Nazhki are stuffed from the inside of the seat support.

Bench SHIELDING can be KNOWN (that is, not solid, but consist of their boards, closed with each other by a bar-bridge). A simple country bench with a photo below just demonstrates this method.

And this garden bench made of thick boards is also made according to the same principle.

Model No. 4

EDGE BOARD benches

Do it yourself with your own hands.

And here is another simple model of a country bench. Simplicity is not only in the design, but also in the material. From one long edged board, you can make just such a garden bench quickly and easily with your own hands.

It can be supplemented with armrests, covered with a noble dark stain, or bright rich color paint.

On the sides of a country bench of this type, you can make coasters for books, beer, those things with which you like to relax in the country.

Let's look at the drawing of this country bench. We see that all the corners of the board cuts have a slope of 30 or 60 degrees. The dimensions in the drawing are in inches. One inch equals 2.54 cm.

We see the drawing from the side. The length of the back and seat is up to you.

We cut the board into the segments we need. And we assemble the bench for bolts, screws or nails.

To such a bench in the country, you can make a table for provisions. Or an ordinary shield shop.

Model No. 5

Shield benches for summer cottages

WITH CURVED SIDE SHIELD.

The shields that you cut out for the SIDES of your bench in the country can have SMOOTH ROUND LINES. Then the bench can become a real work of art - your creative work.

The seat in such a bench rests on the PLANKS stuffed under it from the inside of the sidewalls.

The back rests at the bottom - on the same bar as the seat, and at the top on a bar stuffed vertically along the back part of the curved sides.

The boards from which you cut out the curly sidewall can be processed along the edge, giving it roundness and smoothness (left photo below).

And curly sidewalls can be cut not from an ordinary shield, and from carpentry with a relief - the front of the cabinet or an old paneled door. Even the door handle can not be removed - but left for beauty (on the right photo of the bench below).

Model No. 6

Slatted bench for giving

How to do it yourself.

And from the carved sidewalls you can make an interesting RAIL BENCH. They get a round seat with smooth outlines and a curved back line.

In the photo below we see just such a convenient bench for giving.

The curvature of the bench is obtained due to the fact that narrow slats are stuffed AROUND THE FLEXIBLE PERIMETER of the figured side parts.

In the photo below we see a master class for making such a bench for a summer residence. In order for the slats not to bend under the weight of a seated person - for such a bench they make another frame curly element - along the center. All three parts are connected together into one common frame - simply by PUTTING THEM ON THE SLOTS OF THE LOWER RAILS (as in the photo below).

And then on this frame along its upper perimeter - we fill the rails on the screws.

If you want such a bench to be longer, then you just need to make not three curly frame models - but four, or five, or six. And of course, the stuffed slats must also be long.

Model No. 7

Quick bench -

from foam blocks with a cavity.

Foam blocks (or gas silicate blocks) are sometimes made with through holes inside. This is done to save material and also to enhance the heat-shielding properties of such a building material.

And we can use this "leaky" feature of gas silicate blocks - for the good purposes of creating a bench in the country.

To do this, we install 2 two rows of foam blocks with holes DOWN, and put more foam blocks upstairs with holes on the side. And in these holes we insert a beam of a suitable section. To make it more comfortable for the pope to sit upstairs, you can put foam pillows. It is better to choose those that are lined with waterproof fabric. Or sew it yourself from oilcloth and thick foam rubber (sold in household stores and construction stores).

You can simply hammer it with a sheathing of boards into a solid one - so that a flat seat without holes turns out.

And it’s also good to cover the foam blocks with ordinary paint - to get a bright beautiful bench.

Here are some ideas for making country benches with your own hands. But this is not all the models of wooden benches that I would like to tell you about. Therefore, wait for the continuation - we will make interesting benches from wood (beams, boards and logs).

Your professional growth will not end there...

You will see how easy and quick it is to make a real building with your own hands - a large summerhouse. How to install pillars, how to make a roof yourself (without any building education), how to cover it with a roof (polycarbonate, slate, tiles). Stay with our "Family Bunch" - and we will give you "golden hands".

Good luck with your home building.

Olga Klishevskaya, specially for the site

If a did you like this article
And you want to thank our free author for this painstaking work,
then you can send any amount convenient for you
on the his personal Poison wallet - 410012568032614

Improvement and arrangement of the landscape territory of the personal plot is not a matter of one day. You will have to spend a lot of effort, time, connect your imagination, be patient, and only then the result will be “on the face”. But even after the painstaking work carried out, the site will require attention: cleaning up fallen leaves, applied dust, somewhere something needs to be tinted or corrected.

And so that the site does not seem ordinary, it can be periodically supplemented with various decorative elements: fashionable in recent years - in addition, beautiful benches can be installed in the garden ... That's it, this review will be devoted to benches and benches.

Do you need a bench on the site at all?

The question immediately arises, do you need a bench in the garden at all? The answer is unequivocal - of course you need it! We argue that at each site, there must be a place where you can take a break from work, hide from the hustle and bustle, just sit, listen to the birds singing, enjoy the fresh air, read a book, and dream, after all.

How to make a shop with your own hands (video)

Any person needs all this, thus, he gains strength, strengthens his nerves, discovers the hidden potential in himself, because it is not for nothing that the Eastern sages spend so much time in their gardens, meditating. In addition, we all have known for a long time that many creative people are looking for inspiration in such calm, beautiful corners at any time of the year.

Where to put a bench

When choosing a place for a future shop, it is better to give preference to that part of the site where trees grow, flower beds with flowers, fruit bushes are thought out, and a babbling brook runs nearby. After all, it is in such places that unity with nature is most clearly felt, here a person will rest easy, and his nervous system will quickly recover from the stresses of everyday life and other negative factors. Also, the place for the shop will be in the work areas, next to the flower beds or beds. After weeding or watering the plants, you can immediately sit down on a bench and gain strength for further work.

Do-it-yourself pallet bench (video)

Bench selection

As for the choice of benches, the assortment in stores is really wide, you can buy a metal bench, wooden, plastic, stone (marble, granite, quartzite), combined. Models with carved wood elements or forged metal additions are in great demand. If you want something more exclusive, you can make a sketch of the future product yourself, and visit a carpenter with him, he will gladly make your dreams come true. When choosing this product, we recommend that you look at the benches with a back, as well as handles, it is comfortable to sit on them in a completely relaxed position. But benches without a back are not intended for long gatherings, since sitting on them will need to constantly keep your back in good shape.

Unusual shop with three XXX do-it-yourself (video)

Bench to the style of the plot

First of all, you need to build on the style direction of the site, if the garden is made in the Japanese style, a red-painted bamboo bench will fit in wonderfully here, which should be placed near the reservoir.

In the Chinese Garden, a bench with a trellised back, entwined with climbing plants, will look advantageous. And a gravel, winding path should lead to the bench.

Country style implies the presence of the most simple, but comfortable wooden bench, traditional natural color or painted in a discreet brown shade.

Of course, one cannot fail to mention the Provence style, borrowed from the inhabitants of the provinces - France. The bench should be quite modest, a little antique, in a vintage direction, in white, blue, purple or blue shades.

The Art Nouveau garden can be supplemented with strict benches, possibly with wrought iron elements, or stone benches in the form of animals, insects, etc. By the way, stone benches will look great near the improvised Alpine hills.

The Italian-style plot is successfully emphasized by beautiful benches with stucco elements. Such a bench can be placed near a small pond, with sculptures on its shore.

An English restrained, but well-organized garden, it is better to complement it with stone benches with wooden or metal inserts, golden hues may be present in the color.

The natural style, which is otherwise called forest, can be emphasized with a bench made of tree cuts, on a stump-like base (legs).

The colonial style, which originated in early America, is best complemented by wicker benches, but you can also install an ordinary wooden bench in a metal frame.

Garden benches - photo

When you visit Casino X official website for the first time, you will definitely remember this site for its unique design and a large selection of promotional offers. Experienced gamblers who know a lot about gaming software are happy to become guests of the resource. It has everything you need for a comfortable game: licensed devices, bonuses, a high level of service. This is a serious long-term project that is successfully advertised on the Internet and provides a real opportunity not only to hit the jackpot, but also to withdraw the well-deserved winnings without any difficulties.

Virtual slot machines Casino X of any genre

All professional resources that review Casino X note its very impressive gaming range. More than 450 slots from more than 30 providers are waiting for you. The main part is the development of Netent and Microgaming. Basically, these are five-reel simulators of various genres: fantasy, history, plots from films and legends, fictional stories, sports, animals, treasures and, of course, fruity classics. For convenience, top online slots are collected in a special section. Interesting game mechanics await you:

• free spins;
• cash bonuses;
• multiplication of awards;
• Special symbols;
• accumulators and multipliers.

To the official website

The web resource also focuses on desktop entertainment and the Live category. To switch to paid rates, you need to create a profile in the system. As soon as the quick registration is completed, the player can replenish the account of his account. Immediately after that, you can start playing the most popular slot machines. Most of the devices are adapted to gadgets with touch controls. On a Casino X smartphone, the mobile version is slightly different from the format on a computer. There are no functional differences: you manage your bank and rates in the same way as on a personal computer.

Free game mode at Casino X online

The club's clients do not have to look for where to download slot machines for permanent access to demos. The browser version of the portal works around the clock, as well as its technical support. The site is occasionally updated to better meet current quality standards. All guests of Casino X can play for free without registration on one condition - connecting a smartphone, tablet or computer to the Internet. Just click on the video slot you are interested in and start a test game in demo coins. The results of such spins or bets at the roulette or poker table will not affect the real balance in any way.

Unlimited access to Casino X official website

If for some reason Casino X the full version does not open at your usual address, this problem is easily solved thanks to alternative copies. For each client and a simple guest, the mirror today is the most convenient way to enter your account and the page with slot machines. The same licensed software is waiting for you with a full guarantee of specific algorithms. You will never lose your status and balance, as additional addresses with a similar interface and bonus features are constantly added to the network.