Crafts from foam snowflakes. DIY foam snowflakes

Fish from ceiling tiles

Everyone who has experienced repairs in the house, as a rule, retains the remnants of building materials. Of course, you can throw them away and not puzzle over where to put all this rubbish. But perhaps among the garbage there are objects that can be given a second life. For example, do crafts from ceiling tiles. There are a few simple tricks that allow you to turn them into exclusive accessories that you are not even ashamed to give to others.

What can you do with your own hands from tile waste?

General rules for working with material

The possibilities for tiles are almost endless. It takes a little stretch of the imagination, and immediately a lot of ideas are born to help design some useful things for home and family. But when working with the designated material, you need to remember the following features:

  • Expanded polystyrene is a foam material that melts easily at high temperatures. With some methods of processing it, an open flame is used. In this case, you need to work very carefully. And it is better to put cardboard or any other non-combustible material under the tile.
  • Expanded polystyrene is a fragile material. It springs a little, but if you bend it half an angle of more than 30 degrees, it will easily break. But from it you can cut oval parts with smooth lines.
  • Do not paint ceiling tiles with ordinary pencils. They will leave sloppy holes on the surface. But it is with a pencil that you can make a textured volumetric ornament.

Ceiling tiles, when wet, do not sag and do not lose their elasticity, so they can be safely painted with water-based paints. But remember that it is absolutely impossible to use paints and varnishes that contain acetone. It instantly corrodes the surface, forming ugly holes. Therefore, nail polishes, acrylic and other similar compounds are prohibited.

Important! When decorating crafts from ceiling tiles, experts recommend using gouache or felt-tip pens.

For gluing individual elements, you cannot use "super-moment" glue - the material can also melt from it. Only PVA glue will be an ideal tool.

original gizmos

What crafts from ceiling tiles can you come up with? A lot of ideas. With the help of this material, original tiebacks for curtains, parts for assembling aircraft and ships are made. Ceiling skirting boards are most often used to create frames, and openwork ceiling tiles are turned into an interesting wall decoration.

Ceiling tile house

Give your child a real snow house. To make it, you will need three snow-white ceiling tiles, liquid nails, cotton pads and beautiful braid.

Using a regular utility knife, carefully cut two identical parts for the roof and four for the walls. In the latter, immediately make window and door openings. Decorate the window with a beautiful curtain by gluing the fabric from the inside to the wall. And only then glue all the details. This can be done with the help of glue, with which the tile is fixed to the ceiling.

Decorate the roof with ordinary cotton pads. They are simply laid in the form of tiles and each layer is also glued.

The house is fixed on a cardboard base, and any souvenirs are placed inside it, if desired. It can be Christmas tinsel, and sweet surprises.

Ceiling plinth

But such a craft will become an original decoration for decorating other do-it-yourself works. Make it easy.

The remains of the ceiling plinth are measured and cut into ribbons of the desired size. The edges are cut at an angle of 45 degrees. And then glued with glue designed to work with ceiling tiles. For a more secure grip, you can insert needles inside.

Generalization on topics

If you wish, you can easily figure out what to make from ceiling tiles. The simplest thing is to cut out fabulous figurines from them, color them with your children and decorate them with chipped New Year's toys. So you will have original decorations in your house. Turn on your imagination, and you will succeed - do not hesitate.

From ordinary foam ceiling tiles, you can make unique decorations and crafts for the New Year. The article has examples of those and a description of how to do them.

Often there is a desire to decorate your home with holiday crafts. This ritual is especially important on the eve of the New Year. After all, it is on this celebration that people are waiting for some kind of miracle. First of all, children expect magic, so they try the most.

How to make decorations from ceiling tiles?

It's time for family, time for friends, time for good food and time for shopping. It's not your fault, it's just like our culture. So yes, you may have to buy gifts for your family, friends and colleagues, but do you really need to buy new Christmas decorations every year? Of course, you can buy them once and then reuse the same ones over and over again. but if you are bored with routine or just feel creative, why not create some of your own decorations?

Crafts can be made from various materials, and there is a lot of information about this on the online spaces. Very original Christmas tree toys are obtained from ordinary foam tiles, which are glued to the ceiling. Next, consider examples of New Year's foam decorations in detail.

How to make a white fairy house from ceiling tiles: diagrams, description, photo

To get started, first of all, stock up on free time. This process will require patience, skill, desire. And the kids will be delighted with such work.

Junk Mail Balloon Decorations

And by using recycled materials, you will not only save money, but also break the crazy consumer cycle! If you need ideas to get started, here are some easy decorations and crafts that anyone can make at home. Have you bought too many Christmas cards and have nothing to do with them? All of this paper can be used to create impressive Christmas garlands and decorations.

To make this particular decoration, all you have to do is cut your spare paper cards into circles, fold them, glue them together, and string them all together. It really is as simple as it sounds. Read the full tutorial for detailed instructions.

Prepare materials, tools in advance:

  • scissors, marker, glue
  • tiles, sharp knife
  • felt-tip pens, gouache, colored paper, foil

The house can be made in one plane, or rather, simply cut out a roof pattern from foam plastic, a front panel with a window and a pipe on the roof. And you can build a whole 3-D model of a real fairy-tale gingerbread house or Baba Yaga's hut.

If the first project seems too difficult for young children, this one will be perfect. There are no additional folding and gluing - just cut out pieces of paper and stick them on a thread. You can use any paper for this, from unused Christmas cards to junk mail and magazines.

All it takes to make keyboard decorations is some keyboard keys and a little creativity. Even if you just chain them in the lines that make up the words, you've already done something special. Making a sturdy deer as perfect as the picture takes a bit of work and some tools, but it can be a fun project for you or your older kids and the results are sure to get a response. All you have to do is some corks and twigs, although some extra embellishments can definitely help.

For the second option do the following:

  1. Cut out four walls of the house from the foam
  2. Two identical roof pieces
  3. Two isosceles triangles for the front and back of the attic part of the building
  4. Then carefully make openings where there will be windows, doors
  5. In the future, they can be decorated with colored paper, make curtains inside
  6. Glue all the finished parts of the product
  7. Cut out the pipe and glue it to the roof
  8. To make the house more fun, you can still make a whole courtyard
  9. There, make a Christmas tree in the yard (again, from foam)
  10. Decorate it with felt-tip pens, paint and draw toys on the branches.

How to make snowflakes from ceiling tiles: cutting templates, photos

What a New Year's holiday without beautiful white snowflakes of various shapes. They are cut not only from paper, but from ceiling tiles. It’s just worth considering that you can’t fold the foam like paper, so that the snowflake turns out to be strictly symmetrical.

Snowflake lanterns from empty cans

Are there any empty jars? You are ready to make snowflakes. Then move on to the next tutorial to learn how to make lanterns. Long story short, you need to glue some snowflakes on top of some jars, and if you like, light some candles inside. You can use snowflakes in many different ways, like gluing them to the wall or any other way you can think of. It won't take long: take a few pages from the book, cut them up and attach a piece of string. This ornament is very easy to make and will give your Christmas tree an authentic book look.

To create neat products, you will need patterns (templates that you can make from cardboard). Subsequently, such patterns are not difficult to transfer to the material using a conventional felt-tip pen, it is enough just to outline the contours.

A number of such examples of patterns you will see below in the image.


They can be printed on a printer, and then carefully cut out, glued onto more durable paper. Again, cut out, after which you can safely transfer them to the foam tile.

Do-it-yourself volumetric snowflake

Follow this guide for more details. This is a great craft for those who have young children and want to get them involved in the fun. Just collect some empty yogurt bottles and some extra bottle caps, and using a few simple craft supplies, create these adorable snowmen.

You can fill them with all sorts of treats. In this tutorial, for example, the snowmen are filled with jelly. Don't throw away burned out light bulbs! Cover them with glitter or paint, and hang them on your tree instead of those expensive store-bought decorations. It's very simple and requires no more than simple creativity and any supplies you have. To understand how to make the ornament in the picture above, check out this tutorial.

Now cut out the intricate patterns of snowflakes with a sharp knife on the foam. Hang the finished products on the Christmas tree or decorate them with garlands, chandeliers in the house.

IMPORTANT: When you cut out snowflake figurines from ceiling tiles, keep in mind that the material is brittle and do the process carefully, with the utmost care.

Corks are a great thing to save if you love recycling and crafts. Apart from reindeer, you can also make other decorations out of them and of course this wreath. All you need is a Styrofoam wreath, a glue gun and of course corks!

How to make a white fairy house from ceiling tiles: diagrams, description, photo

Collect some coffee filters you don't need and make a tiny Christmas tree. As long as you have filters, a foam cone or whatever for the tree itself, and something flat for the base, the rest is really up to you. Paint on filters or leave them white, glue on whatever you find as decorations, and find the perfect tree top to suit your little tree.

How to make a Christmas tree from ceiling tiles?

If the Christmas tree is already in the house, then the children know that on New Year's Eve gifts will definitely appear under it. But there are unexpected situations when adults did not have time to buy the most important symbol of the New Year. In this case, you should not be upset, a pretty Christmas tree will turn out from various sizes of ceiling tiles.

Follow this guide for some inspiration and instructions. Christmas is not the only time of the year when you can use things that you usually throw away. For example, did you know that you can? How do you dispose of your old computer equipment?

How to make winter snowman crafts and activities using recycled and readily available materials. Print out the snowman template and the costumes you would like to use. You may want to make three different snowmen with different gear.

True, the product will need a thicker tile. In addition, the number of squares must be collected more, then the artificial beauty will come out large.

Fold the squares in the form of a pyramid, as in the picture below. Glue a small top on top.

Christmas tree - do it yourself

IMPORTANT: Christmas tree decoration is suitable for any. Silvery rain, garlands, beads will be very useful.

Color the swatches and then cut them out. Glue the clothes to the snowman. If you want to make a snowman into a paper doll so you can dress and undress the snowman, carve the snowman and add paws to the clothes.

Crepe paper or scarf material.

Orange colored nose pencil for carrots. To make the snowman's head wrinkle on the scrap paper and hang the bag about half way. Tie off the end and draw a white bag. To have the snowman's body fill another paper bag almost to the top, then fold the top edges over each other and seal them.

How to make Christmas tree decorations from ceiling tiles?

As Christmas toys, you can use a variety of figurines on a suitable New Year's theme.

Santa Claus with gifts

Deer - do it yourself

How to make decorations from ceiling tiles?

From one ceiling tile, you can cut dozens of small decorations that are hung on the front door or in other places on the eve of New Year's celebrations.

Roll it up again and then again. Don't worry too much about wrinkles. Draw black or any color. Glue the body to the head and then glue the hat onto the head. Draw the eyes and carrot nose on white paper and then color in the nose with orange colored pencil. Cut out the eyes and nose and glue them to the head. Draw the mouth with a black marker.

Cut out legs and arms from black construction paper and glue them to the snowman. To make charcoal buttons wrap black construction paper and glue it to the body of the snowmen. Cut a strip of paper about two inches wide to glue around the snowmen's hat.

Those who know how to draw well, without much effort, beautifully decorate products with the help of felt-tip pens, gouache and other auxiliary materials. So that they stay on garlands, a Christmas tree, tie threads to stars, bells, snowflakes.

Beautiful decorations for the New Year

IMPORTANT: Follow the safety rules. After all, the foam melts, easily ignites under the action of high temperatures, fire. Therefore, it will not hurt you to explain to your child that you cannot indulge in fire so that a fire does not happen.

Twist and squash water bottle Snowman for kids

Use crepe paper to make a snowman scarf. Cut small slits at the end of the crepe paper to make it look like a scarf.

These little snowmen are so funny! You never know what they will look like until you are done.

Styrofoam snowflakes

Plastic bottles with caps. White and black acrylic paint or plastic spray paint. Items you want to use to decorate your snowmen, such as: ribbon, buttons, felt, twigs, etc. How to make a twisted water bottle Snowmen.

How to make flowers from ceiling tiles?

Flowers, like snowflakes, must be cut out after you transfer the drawing from the template to the foam. To make them different colors, decorate them with gouache. A variety of ornaments will turn out on the surface of the flowers, as there are interesting patterns on the ceiling tiles.

How to make a snowman from ceiling tiles?

Using the applique technique, make a snowman from a ceiling tile. Then place it under the tree on a small stand made of another tile so that it does not fall. A cheerful snowman will delight you and your children, charge you with positive energy throughout the winter holidays.

Remove the label from the water bottle. Use a funnel to fill the bottom of the bottle with about one inch of sand or dry rice. This keeps the snowman from falling. Hold the bottom of the bottle with one hand and grasp the bottle about two inches from top to bottom with the other hand. Rotate the bottle like you would blow up a balloon. If the bottom of the bottle is indented, blow up the bottle until the indentation is gone.

How to make a quilling paper snowflake

Insert a pen or something long and skinny inside the bottle to poke out any areas on the top of the bottle that have been indented after twisting. Once you have the shape you like, screw the cap on the bottle. You can also make a melted snowman by pressing the top of the bottle to make it flatter. Replace cap when you have the desired effect.

Snowman for the New Year holidays from ceiling tiles

How to make Santa Claus from ceiling tiles?

A cute Santa Claus on a Christmas tree in the form of a toy will turn out if you cut it out according to a pattern from a ceiling tile. In addition, for a beautiful design, it can be dressed in a hat, a fur coat made of red fabric. And paint your face. Make a beard, mustache, edge of white plush.

Paint the bottle with white paint and let it dry. If you are using acrylic paint, you will probably need two coats. To have the top hat draw a two inch circle on the black foam and cut it out. Remove the cap from the bottle and place it in the middle of the Styrofoam mug. Trace around and then cut out the circle. Replace the lid and place the cut out part of the circle over the lid. Paint the cap black to match the rim of the craft hat. Glue a decorative ribbon around the hat.

To cap cut the top of the sock so that it is about three inches long. Tie the end of the cutout to the string. Make a matching scarf with the rest of the sock. Cut off the nose of the carrot from the orange foam. You can use real buttons or cut out the shapes of the buttons from the craft foam to stick to the body of the snowmen.

Santa Claus - do it yourself

How to make a tank from ceiling tiles?

The tank is best made from combined materials. To do this, prepare:

  • several ceiling tiles
  • cardboard, knife, glue
  • paint, markers, scissors

Even at the beginning, make a pattern of the tank, as in scheme below, on plain paper.

Use real sticks or hand pipe cleaners.


How to make a paper snowman doll. The color of clothes and hats. Cut out templates. Separate clothes and add sequins, ribbon, or other decorative items. Glue the clothes onto the snowman. Can you help me warm up? I glued the clothes inside.

Kayla used this snowman ship to make a palette game for little kids. She printed twelve snowmen with hats. She wrote the numbers 1-12 on the hats and then added a different amount of bottom to each snowman.

Working process:

  1. Cut out the foam pieces
  2. Start by collecting the bottom of the tank
  3. Glue all the other parts of the craft
  4. Carefully paint it with felt-tip pens, paint.

Styrofoam is an excellent material for this type of craft. If you have imagination, you will come up with various toys for the New Year yourself. Thus, please yourself and your little family members by making them together.

Ko15shulka 06.12.2016

To decorate a house for the holidays, snowflakes can be made from a variety of materials: paper, cardboard, foam, silicone ... And it's not at all difficult.

The snowflake is an integral symbol of winter. On New Year's holidays, you want to decorate your home somehow in a special way. So why not hang (attach) beautiful snowflakes on the ceiling, chandelier or window? It is not difficult to make them, and you can use any material you like. Thick cardboard, foam or silicone glue will do. Learn the secrets of making snowflakes from these materials from this article.

From cardboard

For work you will need:

  • pieces of foam;
  • thick white cardboard;
  • scissors;
  • pencil;
  • PVA glue;
  • silver tinsel.

First, take a large sheet of white cardboard and draw a snowflake on it. An example is shown in the photo.


Cut out two identical parts and glue them together. This is necessary so that the craft is denser and holds its shape well.


We smear the surface with PVA glue and glue silver tinsel and foam balls on it.

Gorgeous snowflake is ready!


Openwork paper snowflake

For such crafts you need to take:

  • white sheets of paper (can be from an album for drawing);
  • scissors;
  • stapler.

First, the paper should be cut into squares. Each square is folded into a triangle twice. Before reaching the middle fold, we make several cuts along the edge with scissors. Then we will completely open the square, after which we can begin to connect the ends in pairs, alternating sides. It turns out one segment. You need to form 4 more of these and connect them with a stapler into one large snowflake.


Styrofoam

If you take a thin sheet of foam and arm yourself with a clerical knife, then in just a few minutes you can make voluminous white snowflakes.

Nowadays, there is a huge variety of building materials, the remains of which we most often throw away. After the repair, there are many pieces and scraps that can be used for all kinds of souvenirs and make useful things in the house.

There is a creative side to most people, and especially if you have kids, there are endless fun crafts you can do with them.

Styrofoam as a material for crafts

The remains of foam ceiling tiles are an excellent material for creativity. It is easily cut with a knife or scissors, durable, tolerates coloring very well, sticks together perfectly. Therefore, just like from simple foam plastic, crafts from ceiling tiles can be made easily and simply with your own hands (see).

Of course, more voluminous gizmos can be made from household foam, which is usually lined with household appliances (see). Because it has a large thickness. In those cases, you can even cut a ball or an egg with a sharp blade. Flatter tiles provide just as much room for creativity. Let's remember our childhood together with you, and just figure out what can be done from the remnants of an ordinary ceiling tile.

Crafts from foam tiles do it yourself

The easiest kind of crafts that can be made from ceiling tiles are pendants or Christmas tree decorations.

New Year decoration

You will have fun and useful time with your children if you are engaged in the manufacture of this kind of jewelry..

  1. Using a clerical knife or just scissors, figures are cut out according to a contour previously drawn on the tile. It can be hearts, bells, flowers, stars or snowflakes.
  2. Do not immediately take on too complex drawings; for starters, these can be simplified forms. If the children are small, help them cut out the main figures yourself.
  3. Now, with the help of PVA glue, you can stick any drawings from colored paper, sparkles, rhinestones or beads. You can draw drawings on the blanks.

Note! Keep in mind that the composition of the paint should not contain acetone or other active substances, since the foam will melt from them. It is best to use gouache, tempera, felt-tip pens or art oil paints. However, it is worth noting that oil paints dry for a long time. Pencils will not work, as they will only push through the material, but not draw.

Festive, especially New Year's decorations - pendants are made to your liking, then a loop is glued to each. For example, simplified figures of Santa Claus and Snow Maiden, snowflakes and more. They are then painted and, after drying, hung on a Christmas tree or made into a garland.

What else can be done from ceiling tiles - a voluminous Christmas tree for the New Year.

  1. For this, about 10 pieces of foam are taken (more can be), and a circle is drawn on each. Moreover, the first circle is the largest, and all subsequent ones are smaller than each previous one. And so - to the smallest. The largest will be the bottom, and the smallest will be the top.
  2. Now, on each circle, cloves are cut along the contour. These will be the branches with the needles of the future Christmas tree.
  3. Next, we take a rather rigid wire, one end of which is inserted into a pre-prepared piece - a stand, bending the tip from below.
  4. Circles with cloves need to be painted green and, after drying, we string them on a wire frame (future tree trunk). We start from the bottom, that is, from the largest circle. And so on in order, to the very top.

The Christmas tree is ready. It remains only to decorate it according to your taste and desire.

Postcards and valentines

Greeting cards or valentines - here is another type of DIY craft.

  1. Valentine cards are cut out in the form of hearts, then painted to your liking.
  2. The sparkles applied to them will look very original. This is done very simply. After the paint dries, the finished heart is smeared with transparent glue in the right places. PVA or stationery glue is best. Then, until it dries, these places are sprinkled with small sparkles. Sequins for manicure, which are sold in haberdashery stores, are very good for this purpose.

Postcards are best done in the form of a book. To do this, two identical halves of the foam are cut off, then they are fastened along one edge with a glued paper strip. Now the card can open and close.

Educational toys

Letters and numbers are crafts that you can make with your child from ceiling tiles that are useful for the development of your child. You can cut out a whole alphabet, which, by the way, will be perfect for a child if he learns to read and count.. You can cut out letters for congratulations, for example, happy birthday for a member of your family and hang this phrase on the wall. It will be a pleasant and original surprise.

More complex crafts - voluminous pyramids, houses, cars and more.

Individual parts are cut out (walls, roof), then glued together into a finished product. For the machine, body parts, wheels are cut out, then everything is glued together in the same way.

Note! Thick PVA glue is best suited for such purposes, since the paint can lie unevenly on the clerical glue after it dries.

Thus, it is possible to build a whole city. To do this, take a large thick sheet of cardboard, then glue every fence, house, car and other details to it.

Welt crafts

Cut-out crafts made of foam plastic residues look very original.

As we understand, this is only a small part of the ideas that can be realized even by those who are not strong in creative activity (see). In fact, crafts from ceiling tiles in the mass of options can be done by everyone. The main thing is desire and imagination. Then you will spend time with benefit for yourself and your loved ones.

After repairs, a lot of remnants of coating materials usually remain in the house. Many are wondering where they can be used with benefit. The remains of wallpaper, for example, are used to paste over furniture, interior items, or make a cover for homemade notebooks. And what can be done from ceiling tiles made of foam? Some use them as the basis for DIY crafts.

Ceiling tile options

The simplest options for products that can be made from foam ceiling tiles are Christmas decorations or pendants. Children will love spending time with you decorating these decorations. They are made very simply:

  • the desired shapes are drawn on the foam plastic residues: hearts, stars, snowflakes, little men, etc .;
  • cut them out with clerical scissors;
  • separate figures are painted or glued on them with PVA glue, drawings are sewn on, decorative elements are sewn on.

The composition of the paint used to decorate foam products should not include acetone and other active substances that can melt the foam. It is better to paint crafts from ceiling tiles with gouache, felt-tip pens or oil paints.

You can make a voluminous Christmas tree for the New Year, paintings on various topics, houses, cars, etc.

Ceiling tile paintings come in a variety of sizes and serve a variety of functions, such as postcards. They can be decorated in the form of a Valentine. To do this, neat hearts are cut out of the tile and decorated with sequins, beads, decorated, and the corresponding inscriptions are made with felt-tip pens. You can make postcards in the form of a book: cut out two identical parts from foam and connect them with a glued strip of decorative paper.

If you can draw well, create a masterpiece, paint a landscape, still life or something else to your liking on a cut piece of tile. Then the pictures can be hung on the wall and shown to relatives and friends.

Another option is to hang photos of your loved ones on a foam base and decorate it with rain, sequins, small toys or decorations. It all depends on your imagination, in this case it is possible to show it to the fullest.

How to cut a glider from ceiling tiles

The most popular foam material product that kids love a lot is the ceiling tile glider. It is quite easy to do, you will need the following materials:

  • ceiling tiles without a pattern;
  • PVA glue;
  • wooden lath, preferably pine with a section of 4x4 mm and a length of 1922 cm;
  • buttons;
  • pins;
  • clothespins;
  • templates;
  • markers, markers, pens;
  • office knife;
  • skin for sanding;
  • plasticine.

First you need to cut out the template. Drawings of various gliders can be found on the Internet and choose a model to your liking. The printed and cut out elements must be glued to the cardboard, then attached to the tile, fixed with buttons or pins and circled. After that, they are cut out with a clerical knife with an allowance of 12 mm.

Now the blanks are treated with sandpaper to give smoothness and smoothness to the surfaces of the wing and the stabilizers for forward and backward movement. The parts should be sanded smoothly and carefully so as not to spoil them.

The next step is gluing all the elements. The rail is coated with PVA glue on one side and the other and left for impregnation. On the wing and stabilizer mark the middle and smear the bottom with glue along the center line. Then all the details are fixed with clothespins, the keel is attached with pins to the wing along the midline.

After 68 hours, you can remove the fasteners and adjust the airframe. To set it up, you should run the model with your hands and see how it flies. If the glider is rapidly gaining altitude, then you need to make the nose heavier by sticking a piece of plasticine to it. If the model dives sharply, then the tail should be heavier and plasticine should be glued to it or the stabilizer should be bent down.

So, if you decide to decorate your ceiling with foam tiles, remember that you can create useful products from the remnants of the material or make toys for your children.

Master class "Flowers from ceiling tiles"



The master class is addressed to educators, parents and all those who love to be creative.
Purpose: interior decoration, festive decoration of the music hall for the holiday
Target: development of pedagogical skills of teachers
Tasks:
- the ability to perform volumetric crafts from ceiling tiles,
- develop creative imagination,
- develop aesthetic taste,
- educate accuracy in the performance of work, caution
- learn how to make flower arrangements.

To complete the composition, you will need the following tools and materials:
- cardboard;
- ceiling tiles;
- stationery knife;
- glue for tiles (hot glue);
- gouache, brush;
- a pencil or felt-tip pen.

Progress does not stand still, we, the employees of preschool educational institutions, come up with more and more new techniques and materials for decoration in order to diversify and update the interior.
I bring to your attention the idea of ​​​​using ceiling tiles.
Ceiling tiles choose the simplest, without bright convex patterns, it can be embossed, it can be without. The imitation of patterns looks beautiful.


On a sheet of cardboard or thick paper, you need to draw a sketch of the future work, develop templates and patterns.
Attach the contour of a larger flower (1 flower for the entire diameter of the tile) to the tile, circle with a pencil (felt-tip pen), carefully cut the necessary details along the contour with a clerical knife, which must be held at an angle of 45% or with scissors, at your discretion. Attention! Tiles are very fragile, be careful!



Now attach the template from the smaller diameter flower to the ceiling tile and also circle with a pencil. I chose 2 flower of smaller diameter and on the tile I got 2 contours of the flower. Cut out a flower template from cardboard in 2 different sizes. Sizes can be any, depending on what kind of flower you want to get.



We also make a circle for the middle, it can be cut according to the template, or with the help of a glass. Cut out all the outlines.


Cut out 2 flowers, I cover with gouache to my liking, let the details dry, for the middle I take yellow gouache.


Now let's start assembling the flower craft with ceiling tile glue (or hot glue).
In order to get a voluminous flower, I take 3-4 pieces of tiles (square 7-10 cm). I glue them together and stick them on the middle of a large flower, put a flower of a smaller diameter on top and also stick 3-4 pieces on the middle. square, and on top I glue the yellow center.


Now we decorate the flower arbitrarily according to our taste and desire. The flowers turned out to be very bright and voluminous, with which you can decorate the music hall for any holiday.



Try to do it too! I wish you all creative success!
Loading...Loading...