Nitrofen for spraying the garden. The drug Nitrafen: application in horticulture

Nitrofen: instructions for use, description, reviews

An effective preparation for protecting the garden from pests and diseases. Available in the form of a dark brown paste, highly soluble in water.

In addition to protection, nitrofen has a stimulating effect on the growth and development of plants.

Nitrofen should not be used on green vegetation. It is used either in early spring, before the buds swell, or in late autumn, after the leaves have fallen.

What is Nitrofen used for?

On fruit trees: against scab, various leaf spots, mosses and lichens. Effectively destroys aphids, mites, scale insects, caterpillars, leafworms and other sucking-gnawing pests.

To prepare a working solution, 200 g of the drug is dissolved in 10 liters of water.

To disinfect the soil, take 300 g per 10 liters of water. For 1 adult fruit tree and
the soil under it needs 10 - 30 liters of solution.

On berry bushes(gooseberry, currant, raspberry): - against anthracnose, scab, powdery mildew, as well as for the destruction of aphids and other pests.

Bushes and the soil under them are cultivated after the leaves fall. Dilute 150 g of nitrofen per 10 liters of water.

On strawberries: against leaf spots and gray rot of berries.

Strawberry bushes and the soil under them are sprayed with a solution at a concentration of 150 g per 10 liters of water. This is done in the spring, before the leaves begin to grow.

For weed control. Effectively fights woodlice, colza and other weeds. It is necessary to cultivate the soil in early spring, diluting 300 g of the drug in 10 liters of water.

They also carry out a general spraying of the garden to destroy the infection. Spray the soil under the bushes and
around berry bushes and near-trunk circles of fruit trees with a working solution at a concentration of 300 g of nitrofen per 10 liters of water.

When using the drug
observe the usual precautions as when working with pesticides.

If you have used Nitrofen, please write if you are satisfied with its action. Would you recommend using this particular preparation to protect the garden from diseases and pests?

Your feedback will help many gardeners evaluate the action of Nitrofen more objectively and decide whether it is worth buying it or not.

Means for processing grapes drugs for diseases

Means for processing grapes: preparations for diseases

Topsin-M

An excellent systemic preparation that is used by winegrowers from:

powdery mildew; fusarium; rot; scab.

The chemical agent fights simultaneously with several pathogenic organisms, therefore it is more effective - the first positive results appear within 24-48 hours. The protective and therapeutic effect lasts 21 days. Spraying is carried out in dry, calm weather.

The disadvantages of the drug include the addiction of fungi to the chemical and the need to alternate with other means so that immunity does not appear in pathogens. Remember: Topsin-M does not cure mildew, so treatments for the disease will not work.

Shavit F

A popular, broad-spectrum, contact-systemic fungicide that allows growers to protect grapes from:

oidium; mildew; black spot; white and gray rot; infectious drying.

The drug is effectively used for preventive and therapeutic spraying. The active substances of the product begin to act immediately after treatment, and the effect is noticeable after three days. "Shavit F" inhibits pathogenic organisms, disrupts cellular respiration in diseases. Fungi do not develop immunity to the fungicide.

Contact-systemic fungicide Shavit F

Insect repellents

Pests are no less dangerous than fungal diseases, so professional growers always carry out preventive treatments for plants and the site. If you overlooked and the insects attacked, there are chemical agents that we will talk about.

Nitrofen

An easy-to-use preparation kills pests in the bark of grapes, as well as larvae and eggs in the soil near the bushes. Use from:

leaf roller; scale insects; ticks; aphids; worms; moth.

The product burns young greens, so all work is carried out in spring (before the leaves bloom) and in autumn (after the green mass has fallen). They process the entire surface of the grapes and the soil with vegetation under the bush. Additionally, "Nitrofen" protects against spotting and powdery mildew.

Actellik

A powerful broad-spectrum drug used to destroy:

leaf roller; phylloxera; ticks; mealybugs.

Means quickly kills insects and larvae, protects plants during the entire vegetative period. The result of the treatment is noticeable in the first hours after spraying. If you use Actellik according to the requirements of the instructions and alternate with other insecticides, then the pests will not develop resistance to the chemical.

With a small number of lesions, the agent is used in a lower concentration. The drug is toxic, so the procedures are carried out in protective clothing and a mask. Remember: grapes cannot be processed during flowering and 20 days before fruit harvest. The vine is sprayed in calm, dry weather.

Powerful drug with a wide spectrum of action "Aktellik"

Bi-58

A popular systemic and contact insecticide that is used against all sucking and gnawing insects:

leaflets; aphid; ticks; scale insects; thrips; leafhoppers; caterpillars.

The active substance of the product penetrates into the tissue and protects not only the processed parts of the grapes, but also the growing shoots and foliage from pests. "Bi-58" shows excellent results at high and moderate temperatures. Sprayed plants receive strong immunity, therefore they delight the gardener with increased yield characteristics.

Confidor Maxi

An excellent systemic insecticide that helps gardeners fight against sucking and gnawing insects:

leaflet; phylloxera; aphid; thrips; mole; scab.

Additionally, plants develop resistance to adverse conditions and lack of nutrients. The drug has a long period of exposure to pests - up to 15 days. The active substance penetrates deep into the grape tissue and is almost not washed off by precipitation. The result is noticeable in the first minutes after spraying. "Confidor Maxi" can be used in hot weather. Remember: spraying is prohibited 20 days before harvest.

Spring processing of trees in the garden - what to spray before bud break? How to apply fertilizers, what do they protect against?

Freezing buds, shoot diseases, yellowing of leaves, dropping of inflorescences, pests and diseases on trees are a number of problems that spraying in early spring copes with. You need to open the season before bud break. During this period, it is possible to carry out sanitary or formative pruning of trees, rejuvenating the crown. Read, Spraying consolidates the result of our labors and gives an additional incentive for further development.

When to spray trees?

Spraying trees before bud break from:

• Shchitovki;
• apple tinsel and its masonry;
• Ticks;
• Moth;
• Copperheads;
• Spotting on the leaves;
• scab;
• Prevention from lichens and mosses;

You need to process all the trees on the site, especially apples, cherries, pears, plums and cherries. Who grows quince , also take care of timely processing. It will not be superfluous to walk through the bushes: currants , for example, gooseberry. By foliar feeding of trees, we stimulate the development, fruiting and, as a result, we get an excellent harvest.

How to spray trees before bud break:

Additional effective preparations to spray trees before bud development: carbamide or urea (5%), nitrafen (3-4%), KZM emulsion, Abiga-Peak (0.4%).

↓ Write in the comments what you have tried or know that you can process trees in early spring. What spray recipes are right for your trees?

In order to grow not only a qualitative, but also a quantitative crop, gardening enthusiasts not only need to create favorable conditions for the growth and development of fruit and berry crops, but also take care of their protection from harmful insects and various diseases. With the right and timely, it is possible to increase the level of plant resistance to viruses, bacteria and other pathogenic microorganisms, and increase the chances of collecting tasty and beautiful fruits.

Article outline

Appointment of the drug Nitrafen

Due to the content of sodium salt of alkylphenol nitration products obtained from coal or shale semi-coking resin, Nitrofen is actively used to protect the garden from fungal and mold diseases, which ensures their normal development and effective fruiting. In most cases, the insectofungicide is used as an aqueous solution, which is used to treat fruit and berry crops along the leaf.

The paste-like mass of 60% obtained by filtering shale phenols is distinguished by a dark brown color and a pronounced pungent odor of carbolic acid. Its advantage is good solubility in water. You can buy an agrochemical at any specialized outlet, where it is presented in glass, iron containers, as well as in polymer containers. In addition to the protective effect, Nitrafen has a stimulating effect on the growth and development of horticultural crops.

The principle of action of Nitrafen

According to the instructions for use, Nitrafen should be used at the beginning of the spring season - before the activation of vegetation processes. Such measures will make it possible to destroy harmful insects that have successfully overwintered in the shoots and bark of trees. And autumn treatments with this insectofungicide will effectively prepare the plants for the dormant period, they are produced after the leaves have completely fallen off.

The main action of Nitrafen is to destroy harmful insects and pathogens. The drug is positioned exclusively on the positive side, it stands out with fungicidal, herbicidal and insecticidal effects. The agrochemical is able to create reliable and long-term protection for fruit-bearing crops, this is achieved due to its long-term preservation on any type of soil and organic surfaces after spraying.

Once in the soil, Nitrofen begins to show its indiscriminate effect, effectively restraining the growth processes of weeds. It is not worth using as a separate drug as a chemical for weed control, since the effect it creates does not differ in long-term action and salts the soil.

How to treat with Nitrafen

The chemical preparation shows its high activity against:

• lichens;
• fungal infections;
• mosses;
• various kinds of spots on leaf plates.

• ticks;
• caterpillars;
• mole;
• scale insects;
• suckers;
• small aphid colonies;
• winter drops;
• leaflets, etc.

To prepare the liquid, 200 g of Nitrafen and 10 liters of water are used. In this ratio, a solution is prepared for the treatment of wounds formed, various kinds of damage to fruit and berry crops.

To disinfect the soil, the Nitrafen preparation is applied to the near-stem circles of garden plantings, which makes it possible to effectively deal with pathogenic microorganisms, which significantly reduce yields and destroy plants. To destroy the infection in the soil, it is necessary to dissolve the agrochemical in water at the rate of 300 g per 10 liters of water. But before performing the manipulation, you should collect the fallen leaves and burn them at the stake. To process one adult planting, you need 10-30 liters of working fluid.

To prepare a working fluid, you need to dilute 150 g of the product in 10 liters of clean water. The procedure is performed after the leaf mass has fallen off. Not only the above-ground part of the plants should be sprayed, the soil also needs to be shed with a solution. The consumption of the liquid used per 10 sq.m. is 1.5-2 liters.

Grape bushes in the event of adverse weather conditions and in violation of agricultural practices also suffer from the invasion of harmful insects and various kinds of pathogens. Especially, plants are often affected by fungal infections. To process the grape bush and the soil under it, the agrochemical is diluted at the rate of 200 g per 10 liters of water.

But here you need to know one nuance: the effect of the drug adversely affects the tender young greenery, it burns it, which is completely unacceptable. Based on these considerations, it is recommended to use a working solution based on it only at the beginning of the spring season, until the leaves have yet blossomed, or, in the autumn, after the foliage has fallen.

Strawberries are also no exception, and are subject to various diseases, attack by harmful insects. Nitrafen is effective against gray rot and leaf spot. Chemical treatments should be started after the first suspicions of a fungal infection are identified.

In order for the product to maximize its effectiveness, it is necessary to properly prepare the working fluid: 150 g per 10 liters of water. For processing strawberry plantations with an area of ​​10 sq.m. you will need 1.5-2 liters of working solution. Spraying of landings and the ground under them is also carried out at the beginning of the spring season, before the formation of new leaf blades. The air temperature on the day of processing should be at around 4 degrees. The optimal number of procedures is 1 time.

Experienced gardeners and gardeners often use this chemical agent against weeds such as colza, wood lice. Disinfection of soil in the garden, in particular, in tree trunks, is recommended to be carried out in early spring with a solution that is prepared at the rate of 300 g of the drug per 10 liters of water.

Advantages and disadvantages of Nitrafen

Among the positive characteristics of insectofungicide can be noted:

• creation of a reliable barrier against harmful insects and various diseases;
• wide range of influence;
• high performance indicators;
• reduction of growth processes in weeds;
• economical consumption;
• ease of use;
• relatively low cost.

Despite a whole list of advantages, the agrochemical has its drawbacks:

• soil accumulation and salinization.

But such negative consequences can be in the case of frequent and underdose use of the drug.

What precautions should be taken

In order to avoid causing serious damage to garden plantings, early spring and late autumn activities should be carried out using Nitrafen. The treatments carried out during these periods are absolutely safe for plants. With the help of this chemical agent, it is possible to carry out not only therapeutic manipulations, but also preventive ones. The best time to spray garden plantings is dry weather, as long as there is no strong wind. The optimal time of day is evening and morning hours.

Given the fact that the drug is a chemical agent, when using it, one should be extremely careful and not neglect personal safety measures. Since in its pure form it is a very toxic substance that can instantly provoke irritation on the skin, mucous membranes of the eyes, and respiratory organs.

If you contact this drug for too long, then there is a high probability of developing severe dermatitis. It is necessary to prepare the working fluid only in accordance with the manufacturer's instructions, without exceeding the permissible dosage. In addition, it is not recommended to use the garden treatment more than once every three years. A special restriction applies to pregnant women, they are prohibited from working with agrochemicals.

Nitrafen has a long duration of action, it remains in the ground throughout the winter season. Therefore, it is so effective to carry out preventive autumn activities.

Nitrafen's analogs

You can replace this agrochemical when processing garden plantings:

• Oleocuprite. The drug is made on the basis of petroleum oil and copper naphthenate, which is effective against eggs of mites, aphids, suckers, scab, and various kinds of spotting. Make a solution at the rate of 400 g per 10 liters of water.
• Copper vitriol. With a working liquid prepared from 100 g of the product and 10 liters of water, it is good to fight against fungal infections, septoria, spotting.

The drug Nitrafen is a fairly strong remedy that can destroy pests and various infections. With it, you can protect garden plantings, but if the dosage is exceeded, it can also cause harm. Therefore, it should be bred according to the instructions.

In spring, not only nature and plants awaken, but also pests. If no action is taken in time, then fruit trees begin to hurt, and you can forget about a good harvest. The main task of the gardener is to take protective measures in time to prevent the attack of harmful insects, namely, to spray the garden in spring. Today there is no shortage of preparations, you can use the traditional Bordeaux liquid, copper sulfate, urea and nitrofen are very effective for spraying the garden.

When to spray your garden

It is necessary to spray the garden in early spring immediately after the snow melts, until the moment when the vegetation processes begin to activate in the trees. In order for the effect to be as effective as possible, it is advisable to do the treatment in the morning or in the evening, and always in calm weather. Do not forget also that you need to spray the entire garden, and not individual trees, this is the only way to achieve the desired result.

Trees are sprayed before buds open.

Early spring spraying of the garden is very important for plants. It serves as an excellent disease prevention and destroys pests, the larvae of which have successfully overwintered in the bark and are already ready for vigorous activity.

How to properly spray

Before processing a tree, in order to revive its cells, it is necessary to clean the trunk of lichen and moss. To do this, take a stiff brush and scrub the bark well with it.

The solution of any drug used must be very thoroughly mixed until a homogeneous composition. If this is not done, then the particles of the drug will settle to the bottom, and its concentration in the solution may not be enough to effectively affect pests. While spraying the garden, do not forget to periodically shake the composition.

When spraying, keep the sprayer at a distance of no more than 80 cm from the branches, and direct its jet towards the center of the tree. In this way, you will achieve a uniform and precise spray of drops of the drug on the treated area.

Do not forget also about your own safety measures and do not let the solution come into contact with the skin, because you are dealing with chemicals that are hazardous to health. Put on a respirator, gloves and goggles.

Protective equipment must be used during processing

Preparations for treating the garden from pests

For spraying the garden in the spring, biological, chemical or combined agents are used. Each of them has its pros and cons, for example, chemicals are very convenient and effective in the first few weeks after treatment, but then they lose their properties. Biological ones are the safest for horticultural crops, animals and people, because. they are made on the basis of microorganisms. Each tool is suitable for combating only a certain type of pest and has no effect on other types of diseases. The most effective are combined products that fight various pests and require fewer treatments.

Hand sprayer for garden treatment

Spraying with nitrofen

Nitrofen is a very effective drug for the destruction of larvae and eggs laid by pests in the fall and in the wintering stage. Trees can be treated with nitrofen only in early spring, while the buds are closed, since getting the product on the foliage leads to a burn and death of the plant. The drug is effective against mosses, lichens, spots, aphids, caterpillars, mites, leafworms. The solution is prepared as follows: 200 g of nitrofen is dissolved in 10 liters of water.

Effective preparation for early spring spraying

Spraying with carbamide (urea)

Early spring spraying of the garden with urea protects plants from many harmful insects, scab and other diseases, in addition, urea is an excellent nitrogen fertilizer. After treatment with this preparation, flowering of trees occurs somewhat later than usual, which prevents the death of flowers during spring frosts.

Carbamide helps fight various types of garden pests

Spraying the garden in spring with urea is done after the daytime temperature is at least 5 degrees above zero. During this period, spraying protects plants from scab, purple spotting, and also helps to fight pests that are still in the wintering stage: weevil, aphids, sucker. To make the solution, 0.7 kg of urea and 50 g of copper sulfate are taken, which are dissolved in 10 liters of water.

Spring treatment of the garden from pests and pathogens is very important for effective gardening. Choose the right preparations and follow the simple rules for the procedure, and your garden will delight you with beauty and good harvests!

Video: garden pest control

Nitrofen belongs to complex action fungicides, which are distinguished by pronounced fungicidal, insecticidal and herbicidal properties.

With the help of this tool, you can effectively deal with various pests of fruit and berry crops.

Its use will eliminate fungal and mold diseases of horticultural crops, ensuring their effective development and fruiting.

Chemical properties

Nitrofen is an insectofungicide that contains the sodium salt of alkylphenol nitration products, which are obtained from the semi-coking tar of coal or shale.

Basically, the agent is used in the form of an aqueous solution and is applied by spraying plants.

How the remedy works

Nitrofen for the garden is a contact-intestinal preparation, which also has a pronounced fumigation effect. After its application, it is well preserved on the leaves of plants, providing them with long-term protection. When penetrating into the soil, Nitrofen helps to reduce the growth of weeds.

With frequent use, it can lead to slight salinization of soils.

Since in some cases the drug can lead to burning of green mass, it is used either in early spring before the buds open or in the fall after all the foliage has fallen.

Instructions for use

Nitrofen is an insectofungicide, the instructions for use of which provide for its use in the form of an aqueous solution. They spray plants or treat the soil.

The use of this remedy will allow you to get rid of scale insects, aphid eggs, leafworms, fungal pathogens, plant mites, etc. With this drug, you can fight diseases such as scab, mealy, mildew, etc.

Treatment with Nitrofen should be carried out in dry, calm weather. The best time would be in the morning or evening.

Do not exceed the concentrations and consumption rates of Nitrofen, provided for in the instructions for use.

Consumption measures for various pests and diseases

Precautionary measures

The composition of Nitrofen is moderately dangerous in relation to a person and will not harm him if you use personal protective equipment (respirator, goggles, overalls).

After finishing work with the drug, wash your hands and face well with warm water and soap.

Advantages

1. protects various plants;
2. has a wide range of effectiveness against various diseases and pests;
3. is highly efficient;
4. reduces the growth of weeds;
5. low consumption;
6. low cost.

disadvantages

• can accumulate in the soil and salt it.

Video: Processing trees and bushes in spring with Nitrofen