Baby pump, varieties, segment of use. Submersible pump Kid: specifications and features Pump kid power watts

To solve the problems of water supply of an average level of complexity, one of the best options is the Malysh submersible water pump, the technical characteristics of which allow maintaining a sufficient level of performance when servicing residential and non-residential facilities. The pump got its name due to its compact dimensions and light weight. In addition to this, there is a fairly economical energy consumption.

Such a device has a vibration mechanism and is operated at depth when immersed in a liquid. Accordingly, for the normal operation of the submersible pump, the design provides for a sealed housing of the appropriate degree of protection. This design is a universal technique, which allows it to be used in different areas and for solving various problems, including:

maintenance of residential buildings and non-residential facilities;
provision of irrigation in summer cottages and suburban areas;
using this device it is very easy to organize an automatic irrigation system using special nozzles;
pumping out water, but here it should be clarified that It is not recommended to immerse the pump in too contaminated liquid.

A distinctive feature of equipment such as a submersible pump for a Malysh well is its reliability, which, along with an affordable price, ease of operation and unpretentiousness of the mechanism, noticeably distinguishes it from a large number of analogues. But at the same time, the service life of the device is not too long, since on average equipment of this type is operated for 2.5-3 years.

Overview of the main technical data of the pump

Despite the versatility of the unit, it is necessary to correlate its capabilities with the conditions under which it will operate. Depending on the modification, some parameters of this device may differ. But, if the Malysh submersible vibration pump is selected, its main technical characteristics are as follows:

Due to the low power (no more than 245 W), this type of equipment is usually connected to a single-phase 220 V network.
The diameter of the well shaft should not be less than 100 mm; under certain conditions, a value of 80 mm is considered a critical lower limit.
Depending on the version, the length of the cable of the pump Malysh can vary from 6 to 50 m.
The rate of water supply by the pump is also determined by the depth of the well or well. So, if the device operates at a maximum depth (40 m), then the performance level will correspond to a value of 430 l / min., While under the condition of zero pressure, the pump provides water at a speed of 1.5 cubic meters. m/h
Relatively small weight due to the wide capabilities of the equipment - 3.5 kg (excluding the power cable).
Two versions of the submersible pump: with top and bottom fluid intake.

As you can see, it is the technical characteristics of the Malysh submersible pump that determine its popularity. In addition, it is far from always possible to purchase a fully functional pump unit for such an affordable price (on average 2,000 rubles).

Principle of operation, overview of modifications

Depending on performance ( Baby, Baby-M, Baby-3) pump design will be slightly different. However, the general principle of operation remains the same for all vibratory submersible pumps: the armature and the piston are set in motion as a result of the conversion of electrical energy into a mechanical equivalent. As the piston oscillates, it pushes the fluid into the discharge port. The main units are: an electromagnet and a vibration unit.

The electromagnet filled with compound is firmly fixed inside the body of the device. It consists of a core and coils. The compound, on the other hand, performs the function of a magnetic system retainer, and additionally acts as an insulating and heat-removing material. Vibration assembly of the pump consists of the following elements: anchor, rod, shock absorber.

The device of the pump Kid allows you to take water through the suction hole located at the bottom of the case. In this design, the main advantage is the ability to pump out the maximum amount of liquid. Other options: Malysh-M and Malysh-3. They draw water from a source through a suction hole located at the top of the body. At the same time, the submersible pump is almost always in the water, so it is not subject to overheating. In addition, when the liquid level drops to a critical level, the supply will stop, but Malysh pumps with a lower water intake will supply contaminated water with impurities of silt and sand.

If you want to make a cover for the well yourself, then our instructions will be useful to you.

Before immersing the device in a well or well, you first need to do the preparatory work:

it is recommended to connect the electric power cable of the pump to the pressure hose to avoid the possibility of tangling;
on the body of the unit put on a rubber ring, acting as the main protection against impacts during lowering and further functioning.

Important: It is strictly forbidden to use an electric cable, as well as a pressure hose as a holding element when the Baby pump is immersed in a water source.

This may damage the integrity of the mechanism. It is recommended to lower the pump into the shaft of a well or a well by means of a string or a cable. No additional fasteners are required to install the pump inside the water source. A towline or a cable is enough to cope with the load that occurs during the operation of the equipment.

Pumps Malysh for wells or wells for water with a water intake hole located in the lower part of the body should be installed about 1 m above the bottom of the water source, but an analogue with an upper fluid intake hole can be safely placed directly on the bottom.

So that the equipment does not overheat, it must be periodically turned off for a short period of time (up to 20 minutes), and such water pumps for giving Malysh should not work for more than 2 hours in a row.
Equipment of this kind is not intended for pumping heavily polluted water, to improve the quality of the liquid at the inlet of the suction pipe filter element installed.
To ensure that the pump continues to operate without the need for repair, after 25 hours of operation, it is inspected for integrity.

Thus, for domestic conditions, such a pump is quite enough to organize watering or water supply from a source. In order to increase efficiency, it is important to correlate the capabilities of the device with the parameters of the well or well. But it should be remembered that the greater the depth of the water source, the less productive the pump will be, that is, the speed of pumping water will decrease slightly. Otherwise, low power, sufficient head pressure, and reasonable cost - all these factors explain the growing popularity of such equipment. Moreover, the payback of the pump will become noticeable almost immediately after the start of operation.

Pump Toddler reviews

Below are reviews of the pumping unit described in the article.

Our dacha is on the outskirts. Therefore, there are no speakers nearby. In order not to carry water for watering the garden from the well, we purchased this pump. Previously, I studied the manufacturers of submersible pumps, models, compared the characteristics. Bought the Kid, because. there are more pluses: it works from a regular 220 V socket, good water pressure and the price is one of the lowest.

Sergey, Orekho-Zuevo

“Several years ago, we faced the need for watering in the country. Dry summers and all. We began to choose the necessary unit with Batya. I must say right away that the Malysh pump was included in our list according to the main criteria - mobility and power from the outlet. I didn’t want to leave valuable aggregates in the country, so we were looking for something small so that we could easily bring / take away. And Baby is exactly what you need. It does not even have 4 kilograms. Read the reviews, like normul. They advised a pump with an upper suction port, as it cools better. Seems logical. Ordered a model with a top suction port.
Now for operation.
With the volume of our irrigation work, the pump copes well. Tomato bushes, apple trees, pears and plums. He supplies us with water from a local well. We put it there depending on the weather. Usually for daytime watering. We poured everything that was needed and turned it off. Repeated as needed. For all the time of operation there were no serious breakdowns, only once the valve was changed. In principle, if you are friends with your hands, then changing is not a problem. The pump is simple and easy to understand. If the warranty is still valid, then do not bother and carry it there. From the experience of a neighbor in the country, who also acquired a similar model, I can advise you not to use this pump for irrigation from stationary water tanks, or at least clean these vessels from leaves and any debris before placing the pump there. This pump is not intended for pumping foliage, branches and dirt!
Successful exploitation."

Dmitry Vasilyevich, Kharkov

“The Malysh submersible pump turned out to be the best solution for me. We do not have artificial water supply on the site, so I bought a pump for the well. There are a lot of advantages: inexpensive, domestic production, does not require complex installation, decent performance, On 6 acres it is ideal for irrigation.

Sergey, Perm

“I have been using this type of pump for quite some time. They burn every 2-3 years. I take them because they have a good price category, that is, they are cheap relative to others. And yes, they are weak. What is 240 watts? Very weak already when the water rises above 12-13m. But no matter how it was, I still buy this pump. ”

Alexander, Krasnodar Territory

“Not so long ago, Malysh bought a submersible pump for his summer cottage, at first I was somewhat confused by its size, but after a couple of uses, I can safely say that the thing is simply irreplaceable, especially for watering my plot with flowers and everything else. He copes with this task perfectly, plus he constantly supplies our house with water and, to my surprise, there were no failures during the work, everything worked like a clock and was pleasing to the eye, so I’m not disappointed with the purchase and I hope it will serve me for a long time. ”

Dmitry Nikolaevich, Serpukhov

Purpose:
Household electric pumps "Baby"(BV 0.12-40) are designed to supply water under pressure from wells and wells with a diameter of at least 100 mm. The principle of operation of the pump Kid - vibration. Pump material - aluminum. The maximum immersion depth of the pump under water is up to 3 meters. The temperature of the pumped liquid is up to +35°С.
Pump "Baby" has been known to everyone for many years and has proven itself in the market during this time in terms of price / quality ratio. Currently, there are many clones of this pump. We sell branded pumps "Baby" Russian production and exactly the plant that began to produce them decades ago under the USSR.

Design features:
Pumps are manufactured in two versions: with upper and lower intake. Top suction pumps cannot be operated when not fully submerged (this could result in pump failure).
We sell "Kid" pumps with class 1 protection against electric shock, which not only makes the pump safe to use, but also increases its service life due to better insulation.

Pump design with UPPER INTAKE:
1. Core, 2. Coil, 3. Housing, 4. Anchor, 5. Stem, 6. Damper, 7. Coupling, 8. Thrust, 9. Pump housing, 10. Valve, 11. Piston, 12. Diaphragm.

Specifications:
- nominal supply - 430 l/h (if there is no need for pressure - up to 1500 l/h),
- nominal pressure - 40 meters (maximum up to 60 meters),
- power - 240 W,
- class of protection against electric shock - I,
- fitting for hose 18...22 mm.

Pump design with BOTTOM INTAKE:
1. Core, 2. Coil, 3. Housing, 4. Anchor, 5. Stem, 6. Shock absorber, 7. Clutch, 8. Thrust, 9. Cup, 10. Valve, 11. Piston, 12. Diaphragm.

Specifications:
Similar to the top intake pump.
A distinctive feature is that this pump must operate in a completely submerged state. This pump also has thermal protection.

There are situations when the pump can pump out all the water from a well or well. To prevent the pump from running dry, often leading to overheating of the motor or destruction of the shaft seal, a dry-running protection relay must be installed. An example of the operation of this device can be seen in transmission excerpt TV channel Ren TV "Repair in an honest way" with the participation of our technical specialists and, of course, the equipment of our production.

There are two categories of buyers of "Kid" pumps: some argue that the best pumps are with a lower water intake, others - with a top one. Since these two categories are divided approximately in the ratio of 50:50, we decided to sell both versions of the pump.

Additions to the description: Pump Malysh made in Russia, with an upper water intake, with a 40 m cable.
The photo clearly shows the hole on top for water intake and next to it is a fitting for a pressure hose.

Alexey 22.02.2015 Pumping stations

Since the 1950s, the Elektrodvigatel plant in the village of Bavleny, Vladimir Region, has been producing a line of household pumps called Malysh. The enterprise itself was founded in the 30s as a machine and tractor station, then military products were manufactured at it. Here we can rightly say that the quality of products has been polished for decades.

At present, a separate production of HMS Household Pumps OJSC has been spun off from it, numerous branches have been created.

They make a simple submersible pump for a well, and diesel units for backup power supply, and much more. All of them differ in unpretentiousness in operation, reliability, reasonable price.

A little about water supply

Residents in rural areas, owners of country houses and cottages, small farms widely use this water pump for various purposes:

pumping out water from basements, cellars, plots;
water supply of houses and outbuildings;
watering gardens, flower beds, lawns, including as part of automatic systems;
horticultural care, spraying.

Advantages and features of products Kid

The name of the product itself speaks of its compact size, low weight. The vibration submersible pump "Kid" can be successfully used both for lifting water from wells, and for open reservoirs, wells. Unlike Chinese counterparts, with equal specified characteristics, they actually pump much more water.

There are several modifications of this equipment:

with the top soaking-up opening;
with bottom;
with thermal relay, for switching off at overloads;
for use in wells with internal casing diameter of 80 mm or more.

When choosing a product with a lower water intake, you need to give preference to a model with a thermostat or place it in a moisture source in a horizontal position. In any case, we should not forget that it can only be used to pump clean water.

model Kid for the well

Consider the characteristics of this submersible well pump:

power 245 W;
maximum head 40 m;
productivity 0.43 cu. m / h, when lifting from a depth falls;
water quality (clean with a temperature not exceeding 35°C);
cable length from 10 to 40 m;
weight 4 kg.

From these indicators it can be seen that it is advisable to use it with low water consumption. The undoubted positive qualities include low cost and ease of installation.

Making a comparative analysis of the model

All vibration pumps differ from others in their simplicity, reliability, versatility, low price. They are ready for use immediately, do not require complex installation, practically do not need preventive maintenance, are mobile because they are light, economical, as they consume only 0.2 kW to lift from 10 m 1 cubic meter of water. These include well-known domestic models: "Kid", "Brook", "Typhoon", "Aquarius". All of them have approximately the same characteristics and a price of about $50. The same model can be manufactured at different factories in Russia, Ukraine, Belarus.

Watch the video, features of use:

They also have the same disadvantages. The principle of operation in them is the movement of the rod from the influence of an electromagnet, in fact vibration. As a rule, they cannot damage the well, but if its bottom is a quicksand, then there will be a negative impact on fragile soils. And in any case, when the equipment is located near the bottom, small particles of soil, sand rise and are absorbed by the apparatus.

As a result, dirty water will flow from the tap. All of them have low performance, when choosing this must be taken into account. When buying a pump for a well, you can safely choose the popular "Baby" model, since the price-quality ratio is good. This can be seen from the results of comparative testing of these products in the following parameters:

high pressure, best performance in liters per hour;
safety of work even at high power surges;
there is protection against dry running, turns off when overheating, cooling turns on again;
good wiring insulation.

Consumer reviews

Submersible view of the Malysh brand pump

The opinions of users of such equipment can differ significantly even for the same model. How it will show itself, how smoothly it will work, depends on many factors: water quality, correct operation, regular use mode, and many others.

But one thing is certain that in terms of sales volume, vibration pumps occupy a significant segment. And all because anyone can cope with them, not only successfully maintain, but even independently perform simple repairs.

If your requests are small, funds are limited, then this is a suitable option. It should also be taken into account that there are also low-quality fakes of well-known models on the market, often of Chinese origin, we are warned about this by domestic manufacturers of brands so beloved by the people.

Conclusion

How to choose the right pumping equipment, advantages and disadvantages. Expert advice, consumer reviews

When choosing equipment for water supply, you should understand many issues. What are the characteristics of your well: depth, water level and its seasonal changes, quality, soil condition. And most importantly, to understand what exactly you want to build, what to get at the output.

Watch the video, good consumer advice:

If you chose a well as a source of water, then you may prefer a submersible well pump. Of all the variety, the most popular are domestic-made units or models of Belarusian and Ukrainian assembly. Only you can understand what exactly is right for you, based on your needs and opportunities. How important is the dry-running protection function for you? If the source has a decent depth, and you only water the garden and fill the containers and do not encounter such a problem, then you should not overpay for it.

When you have to periodically deal with flooding in the area, in the cellar or outbuildings, then automatic shutdown during overloads is important and necessary. The same can be said about the choice of the upper or lower fluid intake from the mine. It is possible to simply place the device in a horizontal position. When buying equipment, everyone tries to choose it with higher performance. But having the same power, the models give unequal pressure and fill your tank in different times. And if one has good performance, then in your conditions they can be completely different.

Comparing the "Brook" and "Kid" it can be noted that in their design they have shock absorbers made of natural rubber, which allows them to work reliably and stably. There is a rubber valve in the case, which is structurally important, but at the same time vulnerable, and in the first place it is he who causes breakdowns. For all other indicators, "Baby" has a number of advantages over other models.

Household water pumps are used to provide water to summer cottages, personal plots and farms. One of the most popular and inexpensive is the Malysh pump, which is used in small facilities where the need for water is small. The unit is called the Kid because it is small in size and weighs up to 4 kg. The pump motor is powered by the mains in the house, the voltage of which is 220 V. With the help of a small power unit, water is supplied under high pressure.

Features of the use of pumps

applied for the following purposes:

water supply for residential buildings and utility rooms
watering summer cottages and land plots near the house
pumping out water from large tanks, incl. pools
water supply to irrigation systems.

Water units Malysh are not designed for pumping sewer water and other heavily contaminated liquids.

Characteristics of pumps Malysh

Baby pump device

The baby is made up of:

electric drive
vibrator
pump housing.

All parts are connected with screws (4 pcs.), which are screwed into the connectors.

The electric drive of the unit has:

core
two coils
power cord, which are molded into the body with an epoxy compound.

The vibrator has:

shock absorber
clutch
diaphragm
rod with anchor and piston fixed on it.

The diaphragm is located at some distance from the shock absorber. They determine the direction of the stem and prevent water from entering the actuator, thereby ensuring the tightness of the unit.

The body of the device is made in the form of a cap, at the top of which are water suction holes and a pipe for its exit. The valve covers the openings and ensures the entry of liquid and its exit from the unit.

Classic pump

This vibration action unit is used for pumping water from a well or a small well with a diameter of more than 100 mm, as well as for irrigating a land plot. In addition to vertical pumping of water, it is possible to carry out horizontal pumping on distances from 100 to 150 m.

A submersible pump cannot pump out contaminated liquid, where the concentration of additional substances (impurities) is more than 0.01%, and the temperature is more than 35 degrees.

The classic "Kid" has a system of lower water pumping. The kit includes a hose 18 -22 mm (diameter). In this version, there is no protective automation against overheating, a filter, as well as a pressure measurement switch. The unit must be submerged to a depth of no more than 5 meters.

The technical characteristics of the M series pumps are fully consistent with the classic ones. The difference is that they are used only for the upper water intake.

Z series pump

This is the best option for an inexpensive unit for pumping fluid from wells with a diameter of more than 80 mm.

Main technical differences:

the unit and its electric drive are placed in a sealed unit, the design of which is monolithic
power (nominal) reduced to 165 W
water supply is about 0.4 cubic meters per hour at a pressure of 20.

The weight of the device is up to 3 kg, the dimensions are compact. The diameter of the hose from this series should be 3/4 in. The cable protected from water ingress is supplied with a length of about 30 m. There is no filter, the device can be supplemented (if desired) with a glass-shaped EFVP filter.

K series pump

These pumps have built-in automatics against overheating (thermal protection). There are no other differences from the classical model.

Installation Features

To properly install the pump, necessary:

Unit better set deep, lower than the dynamic water level. Submersible devices Kid must be placed horizontally, which increases their service life.

Principle of operation and safety precautions

Based on the properties of electromagnetic oscillations transmitted to the float valve, the membrane oscillates, and due to this, pressure increases and liquid is pushed through. Mechanisms of this type are very sensitive, in case of overheating and after the end of the supply of the entire mass of water, engine shuts off automatically to control the operation of the device.

There are several models of units that differ from each other in the location of the suction holes. It is more reliable to purchase a Kid unit with an upper water intake, because in its design the electric motor is located at the bottom and therefore cools faster than other models. The location of the suction holes at the top helps to ensure that dirt at the bottom of the water intake does not penetrate into the unit. This will positively affect the operation of the device and its duration of use.

Models with water intake at the bottom must be constantly checked, as sediment and other impurities can get inside. Need to buy models with thermal protection, to which keeps the engine from overheating. In the event of malfunction of the valves and other minor breakdowns, the Kid can be repaired independently. It is necessary to turn to the help of professionals when the warranty period is over and when measuring an engine that has burned out. Models with a lower intake are recommended to be supplemented with the installation of a mechanical filter that prevents foreign objects from entering the pump.

To avoid damage to the pumping unit, when choosing a model, you must choose the right power, ensure that the device is handled with care, following all recommendations provided by the manufacturer.

Safety

It is forbidden to touch the pump, which is connected to the mains.
If the voltage is higher than normal, the unit cannot be used.
Do not use the device if the power cord is damaged.
The pump must not be moved or secured with the power cord.
During operation of the unit, it is not allowed to block the flow of water.
Uninterrupted operation of the device is allowed no more than 2 hours, with a stop for 20 minutes of rest. Do not use the unit for more than 12 hours a day.
Pumping water with large impurities and debris is not allowed.
The device must not be used by persons or children who lack experience or knowledge for proper operation.

The owners of the Malysh pumps, who observe the precautions and operating rules, are satisfied with the purchase of the device and characterize it only on the positive side. The performance of Malysh pumps is high, despite the small size of the unit, low power and price.

Conclusion

Water Pump Kid - affordable equipment, which provides the house with autonomous water supply. With the help of specialists, you can choose the right model and make the installation and proper connection, which will increase the life of the pump.

High efficiency combined with economy
- simple design, maximum work efficiency
- low price
- ease of launch and further operation.

Where can I use this brand of pump.

Water sources:
- as a submersible vibration pump for a well, while taking into account its diameter, debit (how much water a well can produce per hour).
- as a submersible vibration pump for a well, while taking into account its depth, water level.
- any body of water with sufficient water level.
Water consumers:
- drinking or technical water supply of a small house.
- watering the garden or garden plot. For home, for summer cottages, for gardens, for greenhouses, etc.

How to choose a baby pump

In order to navigate in the model variety of the "Kids" pumps, we present a number of summary tables reflecting the technical characteristics of various modifications. This will help you choose and later buy this water pump with the necessary performance and design features to solve specific water supply problems.

Pressure characteristics

Flow-pressure characteristics are approximately the same for all modifications. It follows from this diagram that the higher the level to which water should be pumped, the lower the pump performance, and vice versa - the lower the lift height, the greater the performance.

Pump "Kid" with a lower water intake

Pump Toddler with bottom fence is the classic basic model. This household vibration pump is used to lift water from wells and wells. In this case, their diameter must be at least 100 mm. Also, this pumping unit can be used to take water from various open reservoirs, while the water temperature should not exceed 35C. So the water intake for this model is lower, you should control its operation, make sure that the water level does not fall below the water intake, which can lead to a “dry run” and overheating of the pump.

Its design features:

Lower water intake

Baby pump. Video.

Pump "Kid-3" with an upper water intake, pump diameter 76mm.

Producer - JSC "GMS Livgidromash", Livny

The household pump "Kid-3" is used to lift water from wells and wells. Moreover, their diameter must be at least 80 mm. Also, this pump can be used to take water from various reservoirs, the allowable temperature of the pumped ox is 35C. Due to its small diameter, it is convenient for use in narrow wells, but it can be used to pump water from any source. The upper water intake ensures constant cooling of the pump.

Its features:

Upper water intake
- the cable with the pump is connected monolithically
- ease of installation, launch and further operation
- a special filter is used to protect against solid impurities in the water.

Pump "Malysh-K" with a lower water intake, with thermal protection

Producer - JSC "GMS Livgidromash", Livny

The household vibration pump "Malysh-K" is used to lift water from wells, wells and other water sources. At the same time, their borehole diameter must be at least 100 mm. Permissible maximum temperature of the pumped water - 35C. An important detail - this model is equipped with thermal protection: if the pump overheats, it turns off. However, its mode of operation should be monitored.

Its features:

Lower water intake
- Complete thermal protection
- the cable with the pump is connected monolithically
- ease of installation, launch and further operation
- a special filter is used to protect against solid impurities in the water.

Pumps "Malysh-M" with upper water intake

Producer - JSC "Livgidromash", Livny

The Malysh-M pump is used to pump water from wells, wells, ponds and other water sources. Thanks to the upper intake, the pump housing is constantly in the water, which ensures its cooling during operation.

Its features:

Name	Power, W	Cord length, m	Head, m	Productivity, l/h	Water intake
Pump "Malysh-M" 6m., (upper water intake)	240	6	40	950	upper
Pump "Malysh-M" 10m., (upper water intake)	240	10	40	950	upper
Pump "Malysh-M" 16m., (upper water intake)	240	16	40	950	upper
Pump "Malysh-M" 25m., (upper water intake)	240	25	40	950	upper
Pump "Malysh-M" 32m., (upper water intake)	240	32	40	950	upper
Pump "Malysh-M" 40m., (upper water intake)	240	40	40	950	upper

When choosing this brand of vibration pump, you should pay attention to the following technical characteristics:
- pump performance
- pressure
- cable length (it differs for each model)
- pump power
- upper or lower water intake.

Instructions for the pump

What does the price depend on

The price of the vibration pump "Kid" will directly depend on the technical characteristics and the length of the cable that is connected in one piece to the pump. The greater the performance of the pump or the length of the cable, the greater its cost.

We recommend as an inexpensive pump for a summer cottage or a small house. It can be used both for technical (watering the site, using water for sanitary needs) water supply, and for drinking. Small dimensions combined with low weight, but at the same time sufficient performance, ease of use - all these factors explain its popularity. Another important advantage is the low cost. Sales statistics in the spring-summer period confirm that this is indeed a small market leader in vibration pumps. Positive feedback from numerous customers confirms this.

Important! To extend its working life - we recommend using a special filter to prevent solid impurities from entering.

To prevent the pump from affecting the walls of the well, we recommend putting special rubber rings on the pump.

How to order and buy

Knowing what parameters a well or well has, it is not difficult to choose the right model of this pump.
By contacting our specialists, you will receive comprehensive advice and assistance in choosing the right model. We know everything about this pump. In our store you can purchase all modifications of this equipment with the required cable length. Upon purchase, a warranty card is given, after the warranty period, post-warranty service is carried out. In addition, a protective filter is always available.

If you need a Malysh pump in Moscow, we can deliver within the city. Pickup from the warehouse is also possible. For buyers from the Moscow region - delivery to the nearest suburbs.

For buyers from other regions, we can send the goods to your address by any transport company as agreed.

You can buy this equipment by making a purchase directly on this site, or by calling the phone in the Contacts section - our manager will take the order and arrange delivery.