Construction of monolithic country houses in Moscow and the region...

MONOLITHIC HOUSES - BUILDING ON A TURNKEY

We carry out the construction of turnkey monolithic houses in Moscow and the Moscow region at a price of 11,000 rubles per meter. This price includes professional removable formwork, foundation, walls, roof, screed. At the conclusion of the contract, the design is carried out free of charge. A house made of a monolith - warm, durable, inexpensive - a real know-how of the 21st century. However, such a cottage requires mandatory insulation, ventilation devices. Working with the company "SVS" you will receive:

• exact observance of terms;
• official contract;
• a guarantee of 20 years;
• detailed fixed estimate;
• photo, video reports, online broadcast from the construction site.

Note that our company does not use subcontracting. There are 50 full-time teams, engineers, foremen with specialized education. In our own design studio, hundreds of ready-made projects of monolithic houses have been developed, construction prices have been calculated. We also carry out individual design.

PLUSES AND MINUSES OF MONOLITHIC HOUSES

Monolithic houses have already shown reliability and environmental friendliness. The construction process, in the presence of professional formwork, is fast. A two-story cottage 10x10 can be built in 2 months. It should be noted that mandatory insulation is required, facade cladding, however, it would not be entirely correct to call this a minus, rather, a feature of the technology.

FEATURES OF THE TECHNOLOGY OF CONSTRUCTION OF MONOLITHIC HOUSES

With the monolithic construction of a private house, it is important to correctly install the formwork and tie the frame from the reinforcement. Then the structure will be reliably protected from external factors, subsidence, and even be able to withstand seismic activity. It is important to use professional formwork that can withstand the enormous pressure of concrete without deformation. To create a reinforced frame, SVS employees take steel reinforcement with a diameter of 14 mm, 16 mm. Knitting of corners occurs in accordance with the design scheme. A concrete solution is poured on slag with a grade of at least M350. Compaction of concrete is carried out with a deep vibrator to eliminate voids.

The technology of building monolithic houses allows you to implement any curvilinear and bizarre forms. It should be noted that the employees of the SVS company use their own formwork, which makes it possible to reduce the cost of low-rise housing construction in Moscow and the region.

In fact, a house made of a monolith is the same as a house built of artificial stone. After all, concrete is based on crushed stone, sand and cement. Such a building needs thermal insulation. The company "SVS" works in compliance with SNIPs, GOSTs, there are necessary SRO permits.

THE COST OF A MONOLITHIC HOUSE AND DUE TO WHAT IT IS DECREASED

The cost of building a monolithic house in Moscow, first of all, is affected by relatively small labor costs during its construction than, for example, with brick construction. The thickness of reinforced concrete walls is usually 10-15 centimeters. At the same time, the bearing capacity is high. A ten-centimeter monolith can withstand twice the load than a half-meter brick wall. The price will also depend on the availability of formwork from the construction team. After all, if installers rent it, then this amount is automatically reflected on the customer.

Just leave a request and get a 7% discount

Send

The best price for the construction of reinforced concrete frame houses!

Construction of a reinforced concrete frame of a house - prices

Monolithic-frame technology has come to individual private housing construction relatively recently, but its advantages have already been appreciated by a huge number of developers. The construction of a monolithic reinforced concrete frame of a house, a cottage does not require the use of heavy equipment and expensive building materials, since all its elements are poured on the spot. A frame house weighs less than, for example, a brick house, and this makes it possible to save on the foundation. The monolithic-frame technology helps out if the building site is located on soft soils or, on the contrary, on a rocky but uneven surface. Disadvantages - a lot of "wet" work, high requirements for hydro and thermal insulation.

No matter how simple the process of building a reinforced concrete frame of a house looks, there are a large number of important nuances hidden in it for the uninitiated look. Take into account the features of soils, calculate the load on the supporting structures, build the frame strictly according to the level, provide hydro and thermal insulation of the building - the Cottage-Expert company will cope with all these tasks. We have at our disposal RBU, special vehicles and other equipment, and most importantly, teams of highly qualified workers under the guidance of experienced craftsmen, engineers and technologists.

The cost of a reinforced concrete frame for one floor (columns + ceiling)

	6x6m (9 columns)	6x8m (9 columns)	8x8m (9 columns)
2.7 m	260000 rub.	305000 rub.	368000 rub.
3.0 m	266000 rub.	313000 rub.	376000 rub.
3.2 m	271000 rub.	319000 rub.	382000 rub.
House size, m / Floor height, m	8x10m (9 columns)	10x10m (12 columns)	10x12m (12 columns)
2.7m	431000 rub.	535000 rub.	613000 rub.
3.0m	439000 rub.	546000 rub.	624000 rub.
3.2m	445000 rub.	553000 rub.	631000 rub.
House size, m / Floor height, m	12x12m (12 columns)	12x14m (12 columns)	12x16m (15 columns)
2.7m	706000 rub.	801000 rub.	920000 rub.
3.0m	717000 rub.	810000 rub.	933000 rub.
3.2m	724000 rub.	818000 rub.	942000 rub.

Our prices for the construction of monolithic-frame houses and cottages in Moscow are among the most affordable, and we confirm the high quality of work with a long-term guarantee.

Construction of a monolithic reinforced concrete frame of the house

A monolithic frame is erected on a pile, strip or slab foundation, depending on the characteristics of the soil. The technology makes it possible to implement the most complex projects - with non-standard configuration and layout, an abundance of curved surfaces, etc. The frame is a single structure of great strength, where the supporting elements are beams, columns and ceilings. The walls in such houses are not load-bearing, so the material for them is chosen taking into account the required performance characteristics. It is very important to create high-quality waterproofing in the plane where the frame adjoins the foundation and to provide the foundation itself with reliable waterproofing.

The main elements of the reinforced concrete frame of the cottage are columns and ceilings. The columns usually have a section of 400 x 400 mm, the standard thickness of the ceilings is 200 mm. There are two building options:

• They start with columns - they reinforce, put up the formwork, pour concrete and after it hardens, they proceed to the construction of walls, having removed the formwork;
• They start from the walls - the walls are built according to masonry plans, the columns are erected between them in the piers (they reinforce, mount the formwork from two open sides and pour concrete).

Overlappings are also cast from reinforced concrete, necessarily performing reinforcement. Concrete is poured in horizontal layers in one direction. Ramming (consolidation of the solution, removal of air bubbles) is performed using special vibrators. Considering the forthcoming loads, concrete with index P4 is used for the columns. For other frame elements, concrete with the P2-P3 index can be used. It is desirable to use industrial formwork for floors. It is versatile and able to withstand a layer of concrete up to one meter thick. A special approach is necessary for laying concrete on a hardened surface. For better adhesion of the layers, bituminous, primer and adhesive compositions are used - this increases the reliability of the frame and the safety of the structure as a whole.

It is very important to ensure a competent thermal insulation device where the frame goes to the outer surface of the house - the ends of the floors, belts, external columns. They are insulated using extruded polystyrene foam or mineral wool insulation. For the construction of walls, you can choose a material with high thermal insulation characteristics and then, already during the operation of the building, significantly save on heating.

Reinforced concrete frame of a house, cottage: issue price

Of course, first of all, every developer who has chosen the technology of monolithic-frame housing construction for his house or cottage is interested in the question: how much does it cost to build a reinforced concrete frame of a building, and what does the final amount of the estimate depend on? It consists of several components, each of which depends on certain factors.

Scope of work : here, as the volume of concrete increases, the cost of pouring one cube decreases. With a volume of 100 cubic meters, discounts can reach 20-25%.

Foundation : the presence of a finished base or its absence matters (the latter increases the estimate), as well as the type of foundation (the cost of a cube for a slab is lower than for a grillage and a strip foundation, but concrete consumption is higher).

formwork : formwork installation changes the cost of concrete work towards higher prices, but, unfortunately, you cannot do without it (unless, of course, you are going to install the formwork for the reinforced concrete frame of the house on your own).

Columns and floors : it is necessary to calculate the volume of concrete for both types of structures and take into account that the cost of pouring a cube for columns is higher than for floors.

The exact cost of building a reinforced concrete frame for your house or cottage can be calculated by a specialist of the Cottage-Expert company based on the project documentation provided to him. The final price of the issue will also depend on the cost of concrete. Here the role is played by the amount of concrete of individual grades (P4 for columns, P2-P3 for floors and other structures), as well as the cost of its delivery to the facility. Delivery can be included in the cost of the material or calculated based on the remoteness of the object from the solution unit (plant), taking into account discounts for the total volume of purchases.

The "Cottage-Expert" company can offer concrete delivery from its RBU, if it is economically beneficial for the customer, taking into account the location of his construction site.

Recently, monolithic construction has received general recognition. This is due to the fact that these houses are built quickly, are environmentally friendly, and have good technical characteristics. Most often, monolithic structures are used in the construction of a residential multi-storey building.

The project of a two-story monolithic concrete house

Monolithic houses are built according to individual projects, so their layout allows you to realize the bold fantasies of future owners. The technology and materials of monolithic construction are constantly developing and improving.

When construction is planned, the primary problem becomes the question: ? Types of materials for construction in the modern market are quite diverse.

brick building

Most brick buildings are strong and durable structures. Brick allows you to make a more flexible layout of the home, living comfortably in all seasons of the year. can be a variety of additional wall decoration. The disadvantages of this technology are labor intensity, long-term construction and high cost.

The project of a brick house with an attic

Basically, brick is used for, there are also brick-monolithic construction methods.

Aerated concrete technologies

Foamed blocks are considered an alternative material for brick construction. are warm, the blocks are made with a minimum geometric error, they are fire-resistant and environmentally friendly, and due to their lower mass, the load on the foundation is reduced.

For the construction of cottages in two or three floors, foam concrete can be used. Thanks to new developments, it became possible to perform monolithic construction of foam materials - using monolithic surfaces.

A house made of monolithic foam concrete is environmentally friendly, fireproof and warm. Facade decoration can be varied, according to the refined taste of the owners.

Ready-made project of a two-story aerated concrete house

Houses from these blocks are distinguished by low prices, accelerated construction, good soundproofing characteristics. But houses made of this material are not recommended to be built higher than two floors and special attention should be paid to waterproofing.

Monolithic frame reinforced concrete structure

Reinforced concrete is used to build skyscrapers and high-rise buildings. A monolithic structure from it is poured directly on the construction site. Houses made of monolithic reinforced concrete can be created with any architecture, have both straight and curved lines.

The cost of such construction is noticeably higher than the rest and therefore it is mainly used for the construction of turnkey luxury country houses in cottage settlements.

This construction method is also called frame-monolithic technology and is unique.

This technology involves the use of removable (wooden, metal, chipboard) and non-removable (polystyrene boards) formwork.

The frame of a monolithic-frame house

Concrete is applied under pressure and rammed in a special way. The construction of monolithic cottages makes them reliable and durable compared to other buildings. This technology is fast, simple and of high quality.

Construction by this method allows you to save heating costs - the thickness of the wall with fixed formwork will be somewhat larger and it does not need to be additionally insulated.

The frame-monolithic structure is guaranteed to be protected from such troubles:

• uneven settlement of the foundation;
• cracks in walls and ceilings;
• deformation of window and door openings.

The described features act as the advantages of monolithic-frame construction. The service life of these buildings reaches two hundred years. Monolithic cottages, unlike brick buildings, are soundproof and comfortable - this is achieved due to the seamless design. Inside such houses it is warm in winter and not hot in summer.

Read also

Construction of a wooden house in winter

The cost of construction is cheaper than the construction of a traditional residential building.

Material - wood concrete

Houses made of wood concrete or - a worthy alternative to expensive materials. Such construction is publicly available and is of interest to the population. Arbolite is a mixture of wood and concrete. It is a lightweight material with high thermal insulation properties, which leaves behind walls made of aerated concrete and brick.

From it you can build houses up to three floors, the thickness of their walls is up to 35 cm, it is frost-resistant and fire-resistant. The price of wood concrete slabs is quite low, which makes it possible to build residential buildings at an affordable cost for the average resident. A monolithic private house can also be erected using an arbolite mixture for the casting composition.

Such a house is comfortable, durable, economical, light and has an energy-saving effect.

Wood construction

For many people, this is a dream. Current technologies make it possible to build houses from this material not only for seasonal, but also for permanent residence. There are technologies for building houses using a wooden monolith method.

The layout of such a house involves an accurate calculation of the structure. The tree is beautiful in texture, environmentally friendly, but subject to precipitation, decay, eating by insects. Therefore, special attention should be paid to the processing of timber or logs before construction and systematic care during residence.

Advantages and disadvantages of monolithic technologies

Nowadays, the latest technologies and monolithic construction occupy a strong position and displace wooden buildings. The difficulties in building a monolith are no greater than others, so you can do it yourself.

Among customers, the construction of turnkey houses is widespread, when a construction company performs work from the design stage to the completion of construction.

The typical approach provides that all construction steps are discussed before the start of work, and at the end the satisfied owner is given the key to the house.

A house made of monolithic foam concrete can be built of any complexity and shape. For its construction, a standard project or an individual one can be used. Monolithic construction has significant advantages compared to other building methods.

Advantages of erecting a monolith:

A monolithic-prefabricated structure involves the monolithic manufacture of some load-bearing elements. External walls are built from other materials, such as panels or bricks. The benefits of this type of construction are negligible.

Cons of monolithic houses:

1. For the construction of a monolithic structure of individual houses, additional labor is required if the house is being built by hand.
2. Projects of monolithic houses are expensive.
3. Due to the characteristics of the concrete mix, cracks in the walls can form over time.
4. To achieve a minimum number of seams, good strength of the walls and overlap between them, concrete must be poured continuously around the entire perimeter of the building.
5. Construction technology is sensitive to weather conditions, especially to frost.
6. Low soundproofing.
7. Difficulties, if necessary, to make a hole in the wall of concrete.

Monolithic house, even the name sounds solid. And it is really thorough, reliable and durable. How can you rate a house in this category? The best, because what can compare with it, across the entire spectrum of characteristics? It's safe to say turnkey monolithic house will serve you and your loved ones for more than one generation. The implementation of this technology is very difficult, it has many nuances and hidden problems. In such a difficult matter, professionals are required and DomaSV they are. How to comply with all standards, reduce defects to zero and execute the project as efficiently as possible? You just need to have the right education, be able to work in a team and have considerable experience performing this type of work. And these qualities will make it possible to produce monolithic construction of a private house at the highest level.

Monolithic construction, although not the cheapest option, still occupies a leading position in the construction markets of stone houses. High-rise skyscrapers and houses on problematic soils, boiler pipes and many other buildings subject to significant loads. Around the world are projects of monolithic houses to provide secure housing. The construction technology has been developed for a long time and has proven itself over the years of operation. That is why we boldly took it to work and have been successfully building houses based on it for several years.

Well, when compared with most other firms, then our turnkey monolithic houses projects and prices will be much more attractive both financially and the variety of your choice.

Accuracy Matters

Construction is always difficult and there is no place for bad contractors, every detail is important. After all, everything in the house depends on everything. From the correct calculation of the foundation and at all stages to the very ridge of the roof.

That is why we have our own staff of proven designers who will develop an individual project for a combined house. Firm Builders DomaSV these are specialists and, unlike the candidate’s neighbor in all kinds of sciences, they can not only analyze the project, but also explain why it should be done this way.

Precisely because we have a staff of qualified specialists, we can say that turnkey construction of monolithic houses This is not an easy task and every detail matters.

Natural outcome

Many of us have encountered unskilled help, whether it be medical, plumbing or any other. So in construction, you always need to know a certain amount of information thoroughly. Otherwise, you can get quite the opposite result.

Firm DomaSV for more than 8 years in the construction market and we have more than 400 projects completed from start to finish. Lots of positive feedback from regions all over Russia. We never chase quantity, our priority is quality and maximum mutual understanding with the client. What exactly does our customer want: individual design, cost savings or a house that will last for decades. Or maybe all together? Impossible?

This is quite feasible. We have our own production and qualified personnel, reliable partners and recommendations of hundreds of people on our side.

And in the end, we can safely say, to build monolithic house projects and prices Pick up is pretty easy. We are always in touch and ready to help you build your dream home.

"MeraniStroy"

We design and build
monolithic houses

The essence of technology

Monolithic house- this is not a prefabricated structure, which consists of separate elements - blocks, panels, bricks, but is a solid structure. Construction involves the use of formwork, where the concrete solution is poured. So, the building or its supporting structure - ceilings and load-bearing partitions - is cast in stages.

The total weight of monolithic houses is lower than that of stone and panel buildings. For the same strength, their walls are slightly thinner, and this increases the usable interior space.

The expansion of living space reaches 17% with similar external dimensions. Light weight makes it possible to build even on problematic soils subject to heaving.

The advantage of monolithic houses:

High construction speed

Strength and durability

Freedom of architectural thought

High energy efficiency

Construction in any season

Monolithic houses are built faster than brick ones.
The house can be completely built in a season.

Main stages of construction

Geological and topological exploration is being carried out at the site. It is necessary to correctly determine the type of soil and its composition, the depth of groundwater, the level of soil freezing and other important indicators.

An extremely important stage is the development of a project at home. It includes design and estimate documentation. It includes the necessary drawings for building a house and an estimate.

The foundation axes are marked on the site. after which earthworks are carried out. The formwork is installed, the reinforcing belt is installed and the foundation is poured.

After that, the reinforcing cages of the walls are assembled. The formwork of walls and ceilings is assembled. A reinforcing belt is installed. After that, the walls and ceilings are poured with a concrete mixture. In the process of pouring, it is vibrated with a deep vibrator.