DIY chandelier: manufacturing principles with a photo. DIY lamp (58 photos): options for desktop, pendant and wall lighting design Do-it-yourself wall LED lamp

Lamp - the item is extremely practical, because, unlike a bulky chandelier, it is very compact and can be placed anywhere, even on the floor. In the process of creating an interior, it is quite often forgotten about, since it plays a secondary role. However, in the setting of a small apartment or room, it will be almost indispensable, and will also help add comfort and warmth to the room. In modern lighting equipment stores you can find a lamp for every taste, but isn't it more interesting to create it yourself? In this article, we will tell you how to make a beautiful and unusual lamp using completely ordinary materials that are in every home.

1. Lamp-garland

To create such a lamp, you will need a wire base, fishing line, paper or plastic bottles, as well as patience, patience and more patience.

From the wire you need to create a frame of the required shape, and cut out circles or figures from paper or bottles. Then you either simply attach them to the wire itself with glue, or string them onto a fishing line. The thinner the fishing line, the more weightless your design will turn out, so from a distance it will seem that your butterflies are "fluttering" on their own.

2. Bead lamp

To create such a product, you will need wire, as well as, if desired, fabric. In a simpler version, you simply string multi-colored beads on a wire and bend it in a chaotic manner. Then a regular light bulb is fixed in the center.

If the soul desires something softer, with an oriental flavor, you can create unusual fabric shades decorated with beads. To do this, you will need old CDs, to which you will attach both fabric and beads strung all on the same wire. - an irreplaceable element, stock it up in abundance!

The fabric should be translucent: organza or tulle will do. It is sewn from one edge and fixed only from above. Then you can string a wire with beads on it. Please note that it is better to choose transparent or "chameleon" beads, otherwise they will look too gloomy when the light bulb is on. Instead of a light bulb, you can place a flickering Christmas garland inside the lamp: this way you will create a festive atmosphere in the room.

3. Light cloud

Incredibly cute and gentle option that will suit both children and adults. It may seem that it is quite difficult to perform, but it is not at all the case.

To create it, you only need a paper "Japanese" lantern, cotton wool and a lot of glue. Cotton wool in large quantities is glued to the flashlight to make a lush lump. Additionally, it can be decorated with pendants in the form of stars, a crescent or raindrops. That, in fact, is all.

It is better if the cloud stays on a thin line, - in this way you will create the effect of weightlessness in the room. This is a great idea for a themed party, so stock up on some cotton and go!

4.Light lock

A similar solution is suitable for those who, as a child, liked to cut pictures from magazines. A surprisingly simple lamp that will create a mysterious, almost mystical atmosphere in the room.

You will need to find a photograph (or print a picture) of an old castle, carefully cut it out and roll it into a kind of tube. Then fix the structure with tape, and put a small light bulb inside. On dark evenings, your castle will be illuminated from the inside, and mysterious shadows will flicker against its background ... well, how can you not tell a scary tale? Also in the castle, you can cut out "windows" through which light will pour out.

5. Lamp from old things

Old dishes, fragments of furniture and even old, shabby lamps are in every home. It's good that you didn't throw them away, because now they will function again, you just need to decide on the style. In some cases, you don't even have to decorate anything, you just need to put the lamp (or what is left of it) in a suitable environment.

Most often, the case is limited to a drill or glue with a dead grip. Such lamps can be placed in any part of the apartment, the main thing is to observe the overall compatibility.

And a few last tips:

1. Use only energy-saving light bulbs in lamps! You don't want to see flames in the place where your beautiful creation was just now?

2. Make sure that the material you choose does not hide the light - after all, first of all, the lamp should illuminate and only then decorate the room.

3. Do not be afraid to experiment, you will succeed! Who knows, suddenly a designer-decorator is dozing in you? It's time to wake him up!

Photo: homedit.com, millax.com, museum-design.ru, idejnik.ru, reduktor-union.ru, happy-giraffe.ru, magdekor.ru, secondstreet.ru, decorateme.com

When there is a desire to change the situation in the apartment and add a little originality to it, start with the little things. Try to change the lampshade, and you will be surprised at the transformation of your family nest.

And if you manage to find an original model that differs from analogues, then the changes will impress not only you, but also your guests.

True, unique lampshades cost decent money, because you can’t get piece work by eminent masters for a penny.

But after all, no one bothers you to create your own unique masterpiece from cheap, and sometimes even junk materials, which will look much better than the samples presented in the store.

All you need is simple materials, a little patience and a flight of fancy, and we will tell you how to make a lampshade with your own hands.

materials

You can create a masterpiece from everything that you have at hand: fabric, paper, thread, twine, wire, plastic bottle, beads or beads.

In general, absolutely everything is suitable, even what you usually send in a garbage bag.

Don't believe? Just look at the photo of the lampshade.

frame

If you have a frame from an old lampshade, then this is just wonderful.

However, do not be upset if one is not found, because you can create a frame yourself from ordinary wire.

Copper, aluminum, steel - everything that you can independently combine into a single structure will do.

The metal frame of the classic lampshade consists of three rings and six jumpers between them. The small ring is a holder, which is connected by three jumpers to a ring of a larger diameter.

The same, in turn, is connected by jumpers to the last ring. The following photos will help you understand the design.

From fabric

When a lampshade frame is available, the easiest way to create your own masterpiece is to wrap the base with a cloth. For this you will need:

• paper (newspaper);
• scissors;
• the cloth;
• chalk or pencil;
• threads.

Wrap the frame with newspaper in such a way as to form a pattern out of it. Then transfer the resulting shape to the fabric with chalk, adding 1 cm on each side to the seam.

Make a pattern, chop off the edges and sew the sides, forming a cover for the base of the future lampshade. We bend the upper and lower edges of the "cover" in such a way as to close the rings of the frame and fix it with a seam.

Note!

Voila, your lampshade for the floor lamp is almost ready. It remains to add a few highlights to your taste, giving it originality.

From threads

How to make a lampshade when there is no frame? As easy as pie.

Take a balloon without drawings, glue, thread, marker and start creating.

First you need to inflate the balloon and mark on it the upper and lower borders of your future masterpiece. Then take the threads and wrap them around the ball, trying not to protrude beyond the marked contours.

Apply glue diluted 1:1 with water to each layer of thread. When the density of the wound thread satisfies you, fix the cut edge and hang the ball to dry. After 3-4 hours, the threads will dry. Then pierce the ball and carefully detach it from the walls of the finished lampshade.

Leaves and flower petals woven between the layers of threads can give additional charm to a lampshade made of threads.

Note!

The ball, decorated with sparkling droplets of beads, also looks original. In general, watch and be inspired.

From paper

Ordinary sheets of office paper, glossy magazines, a cheap newspaper, an unnecessary book or an ordinary notebook, a paper towel or a napkin - these are all future lampshades.

It doesn’t matter if there is a frame or not, the main thing is that there are scissors, glue and paper. A thousand and one versions of such lampshades can be described with the words “cut and stick”.

The main thing is not to forget a few simple rules:

• a paper lampshade is safest to use with economy light bulbs, which heat up much less than incandescent bulbs;
• the diameter of the lampshade for lamps should be large so that the paper does not get too hot;
• for a bright room, you can make a lampshade from thick paper, but for a dark one, you need a thin, well-transmitting light;
• be careful with color. For example, red or yellow paper will add warmth to the room, green and blue - cold.

Well, that's all. Charge with new ideas, arm yourself with improvised means and forward to easy changes that bring warmth and comfort to your home.

Note!

DIY lampshade photo

materials

The most suitable and affordable materials are paper and the cloth. They are easy to transform, they are well known to each of us and can be found in everyone. home. wonderful lamps obtained from threads or yarn. Naturally, glass can also be used for ceiling lamps. At home, these are ordinary or unusual, with an interesting shape, jars or bottles. Especially bold projects include plastic containers, coffee packaging, and plastic children's toys.

In addition, do not discard options such as rattan, bamboo and rubber. As a basis for a future product, both raw materials and a finished product can serve. So, for example, designers got the hang of creating amazing lampshades from beads, globes, parts of sets, mirror fragments and even crumpled music sheets! You just have to look at the things around you...

Understanding how difficult it is to move from thought to action, especially to see an exquisite accessory in an ordinary jar, we have prepared several master classes for you. Following the step-by-step instructions, you can easily make hand-made new clothes for any room in the house, dear to your heart.

Ideas and their implementation

Since we have already voiced the materials suitable for the manufacture of shades and lampshades, let's start with paper.

Plafond with butterflies

For work we need:

• white thin cardboard
• thin twine or fishing line
• glue gun
• wire for frame
• utility knife or scissors
• round nose pliers

Advice! Before you start work, decide on the size of the ceiling in finished form. In our example, the diameter is 30 cm, so we need a piece of cardboard 90 cm long.

1. We make a frame. We cut off a piece of wire 96-98 cm long. We turn the wire into a circle with a diameter of 30 cm and fix the ends with round-nose pliers.
2. We cut 3 hanging elements from twine or fishing line. We measure the length of the pieces, based on the height at which you plan to hang the lamp. We tie them to the wire in three places, evenly distributing the load.
3. We draw butterflies of different sizes on cardboard and cut them out.
4. We fold the cardboard, glue the joint with a strip of thick paper or stitch it with a stapler.
5. We fix the upper part on the wire. To do this, you can use both glue and thin wire.
6. The places of joints and cuts can be decorated with butterflies remaining after cutting.
   Look what an elegant lamp we have turned out. It will fit perfectly in the children's room and in the bedroom. You will see a special chic when you turn on the lamp and butterflies flutter along the walls.

Advice! Instead of butterflies, you can cut out snowflakes, stars or flowers. Decide for yourself what you like best.

In the style of the 60s

If you ask our grandmothers, they will certainly remember floor lamps with lampshades in the form of an inverted bucket, tied with colored threads. We can do exactly the same with our own hands.

We will need:

• lampshade frame - 2 pcs.
• decorative braid (3 colors, choose a combination to your liking)
• scissors
• crochet hook

Let's start manufacturing.

• We tie the first braid to the lower ring of the lampshade, leaving a tail of at least 5 cm.

• We pull it on the upper ring from the outside, throw it over it and stretch it through the inner side of the lower ring. We alternate actions until the beginning of the next frame sector.

• We fix the first braid and take the braid of a different color to work. We knit it to the next sector, not forgetting to leave the tail on the first knot.

• We do the same with the third sector, filling it with the remaining braid.

• We stretch the tails along the bottom of the lampshade with a crochet hook.

Here is our plafond from the distant 60s and it is ready, it remains only to insert the cartridge and assemble the chandelier in random order.

Braid with fringe

Another original idea for a do-it-yourself lampshade is also connected with a braid, but not a single layer, but with a fringe. What do we need for this?

Prepare:

1. two metal hoops or take an embroidery hoop
2. braid with fringe
3. fishing line
4. acrylic paint, the same color as the ribbon
5. glue gun
6. scissors

Advice! Fringed tape can be purchased at stores selling curtain and furniture decor.

1. We paint the hoops or hoops with acrylic paint. If they are already covered with varnish or other paint, it is better to sand and clean them.
2. We wait until the paint is completely dry, and make three marks on each lampshade ring, placing them at an equal distance from each other.
3. Cut off three identical pieces of fishing line.
4. We tie them to the smaller ring of the lampshade, leaving the upper ends with a margin, so that later we can tie them to the lamp cord.
5. We measure the length of the fringe, subtract 2 cm from it, and tie the fishing line to the second ring for the resulting length. So we can get a cascade.
6. We heat the glue gun and carefully glue the braid along the lower ring.
7. We do the same with the upper ring, pulling it out of the lower one.

Advice! Keep in mind that hot glue can melt the line, so try not to apply it directly to the line. Drop the glue on the paper, let it cool a little, and then apply it to the fishing line.

Handmade projects help us add brightness to the interior, make it individual. One of the options is to make a lamp for the house with your own hands. Unusual details, materials, ideas and a little creativity - and the design product is ready.

DIY lamps: interesting ideas

There are many models of lamps that you can make yourself. They differ in design, style, size. A wide variety of materials are suitable for their manufacture - paper, vine, plastic cups, yarn, fabric, glass bottles, plastic bags, wooden hoops, wire, veneer, old things or what is left after repair, etc. The easiest option is to make do-it-yourself lampshade and purchase a ready-made wiring system with a base. It is available even to the very beginners in needlework and creativity.

Wall lamps

You can install a beautiful home-made lamp on the wall near the bed, including in the children's room. Most often, unusual lampshades made of wood, fabric, and vines are made for this. But there are more original options.

At the dacha, we made a lamp from two cans of 0.75 liters and two pieces of board with unevenly cut edges. The boards are interconnected at right angles, and the whole structure is installed on the wall of the house under the porch. Cartridges are screwed into the cans-plafonds, into which LED lamps are inserted. A lamp of this style is ideal for a country house or a rustic-style interior.

Photo gallery: do-it-yourself wall lamps

Vine is an interesting material for creating original lampshades It is very easy to make and at the same time lamps from the board look stylish. Threads, glue and balloons - everything you need to create beautiful lamps From the board you can make different options for lamps A bizarre driftwood - an unusual base for a wall lamp Clouds cut out of plywood can be used to create a night light Even pallets can be adapted to create a beautiful DIY lamp

Table, floor lamps

From improvised materials, it is easy to update a floor lamp or make a new table lamp in ethnic style, hi-tech, or others. Beads, ribbons, and paper clippings are used for decor.

Photo gallery: interesting models of do-it-yourself table lamps

The eco-style interior can be updated by making a floor lamp with a wooden lampshade Long and thin branches, connected together in a bundle, attached to a stable support, are used to create a floor lamp. The frame from the old lampshade can be decorated with beads - you get a new lamp Ribbons and beads can be used as the main material for a new lampshade or as decoration. Fabric lampshades - perfect for a table lamp in the bedroom The lamp can be made from water pipes The lampshade for a floor lamp is easy to knit with knitting needles The original lamp is obtained from the lids of aluminum cans

Pendant lamps

Ceiling lamps made of yarn are common, with which balloons are wrapped, and then the entire structure is covered with glue. For many, such a simple option is the first test in this type of needlework. Chandeliers made of driftwood, bottles or hanging structures made of plastic pipes look more spectacular.

Photo gallery: do-it-yourself hanging lamps

Driftwood chandelier - a bright and stylish item for the living room From beads you can quickly and easily make a beautiful chandelier Wooden material used for the manufacture of lamps must be varnished You can decorate a kitchen or a country house with a bottle lamp Plastic spoons are used to make beautiful lamps in the shape of a pineapple, a ball, etc. Lamp made of metal graters - a stylish and functional decor for the kitchen The remains of water pipes and connecting fasteners - an unusual material for a ceiling lamp

How to make a lamp

Paper - corrugated, colored, geographical maps, cardboard, wallpaper, bags and other types - is one of the best materials for crafts. A simple paper butterfly lamp can be made quickly and effortlessly. To do this, you need a frame from an old lampshade, a metal ring or just a wire, from which the basis for the product is made. Then it remains just to cut out the butterflies and attach them to the frame with silicone glue or, for example, hang them on a wire. It doesn't take long to make a table lamp out of plastic pipes or spoons, although projects are more complex than paper chandeliers.

Paper butterflies for a homemade chandelier can be cut according to the template with the children

Origami paper bag lamp: step by step instructions

Such a lamp can be made wall, table or pendant. For work you will need:

• ready-made electrical base for the lamp - a wire with a cartridge and a switch, a plug (for a table lamp or floor lamp);
• lampshade stand (you can take it from the old one or use improvised materials for this, for example, a thick branch);
• paper bag with an interesting print - 2 pcs. (when gluing, they must be at least 0.5 m long);
• LED lamp;
• thick thread and needle.

Operating procedure:

1. Cut the bottom off the paper bags and remove the handles.
2. Glue the resulting pieces into one, fold in half and then into an accordion. You should get 16 strips of the same width.

   Prepared packages are folded into an accordion

3. Fold each strip diagonally. This part of the workpiece will subsequently be the top.

   The paper blank must be bent accordingly, in order to then make a lampshade out of it.

4. On the opposite side, which remained flat, also bend each strip diagonally. This part is shorter.

   All folds on the packages must be symmetrical and even.

5. Carefully unfold the packages and bend the blank along the resulting folds so that you get a lampshade.

   The folds on the paper form a three-dimensional figure resembling a berry

6. From above (where the folds are longer) sew the workpiece with a thick thread.

   To keep the lampshade in shape, it is fastened with a thread in the upper part.

7. Then insert a cartridge with a wire inside the lampshade, screw in the LED lamp and hang the structure on the stand.

   Since paper burns well, it is better to use LED lamps in the lamp.

Diode chandelier from cartridges-splitters

An ergonomic and unusual loft-style chandelier can be made from socket-splitters for diode lamps. The finished structure is painted in any color suitable for the interior of the room. It is important to firmly fix all the details. For work you will need:

• ceiling socket - 1 pc.;
• cartridges-splitters - up to 12 pcs.;
• lamps - up to 12 pcs.;
• paint in a can;
• paper.

The shape of the chandelier can be any

Spread paper on the working surface, paint the workpiece on all sides with spray paint.

Wait until it dries completely.

Paint the ceiling socket only on the front side and also dry it. Reapply a coat of paint if necessary.

If you want to change something in the room, you can simply connect the fittings in a different way to get a chandelier of a new shape.

Video: how to make a lamp with shades from cups

Everyone can decorate their home with a new handmade lamp. It is enough to choose an interesting idea and make a little effort.

Many designers recommend using multiple light sources in a room, ranging from chandeliers to downlights and floor lamps. This will allow you to illuminate certain areas in the room or create a special spectrum of lighting depending on the mood. But in order to realize the plan, significant financial investments will be needed, since they are creative and cost a lot of money. In this regard, you can make a floor lamp yourself and at the same time not spend a lot of money. You can assemble it from improvised materials, such a product will look good in a country house, apartment or country house. Next, we will tell you how to make a floor lamp with your own hands, providing instructions with photo and video examples.

Step-by-step instruction

Preparation of materials

In order to make a homemade lamp, you will need the following tools and materials:

• lumber and glue for wood;
• hacksaw;
• drill and pliers;
• knife, screwdriver;
• fasteners;
• copper elbow;
• wooden beam for the frame (approximately 140 cm);
• copper tube for the frame (about one meter);
• lamp and electric cord with plug;
• plastic bucket for garbage (openwork).

To make a floor lamp yourself should be step by step. First of all, it is necessary to start manufacturing the base of the structure.

Making the foundation

So, the base is done as follows:

1. First of all, two boards should be cut out of the board. One should be 35x5x20 cm in parameters (length, thickness, width, respectively), the other - 30x2.5x15 cm. Other dimensions can be taken, but it must be borne in mind that the base must withstand the weight of the entire structure and not allow it to tip over.
2. Then you need to glue the two bars with glue. To do this, the smaller board must be smeared with special glue and attached to the larger board. This must be done so that it is in the center. Using clamps, fix the bars until the glue dries completely.
3. After that, you need to measure 5 centimeters from the edge and make a hole with a diameter of 3 cm. And since the base is relatively thick, you will periodically need to remove the wooden parts from the hole. As soon as the hole becomes through, all edges should be sanded.

We make a frame

For the frame, a rack of almost one and a half meters was chosen. This height is chosen taking into account that a home-made floor lamp can be placed near the sofa and the light will fall on it from above. But you can choose a different height.

Before proceeding with the manufacture of the frame, you need to wipe the copper pipe with alcohol. This will remove any remaining stickers and grease.

Then you need to do the following:

We assemble the lamp

To assemble a homemade floor lamp you need:

Inventing a lampshade

Making a lampshade is very easy and simple. To do this, it is enough to have an ordinary office wastebasket for papers with you and follow the following instructions:

The floor lamp is made by hand. Now you can put it near your favorite chair, open a book and enjoy reading. A photo of the finished product is shown below:

A floor lamp for the home can be assembled from a variety of improvised materials. For example, you can simply change an old lamp by adding a new leg or lampshade. For lovers of coziness and comfort, a lampshade made of threads and beads would be an excellent solution. To do this, you need a mesh and threads. Satin threads are wound on the mesh, and the lampshade is installed on the rack.

Also, the lampshade can be constructed from plain white paper or fabric. A homemade frame is wrapped with cloth or paper and with the help of special paints they give it their own style. And handmade jewelry made of beads, shells, rhinestones or buttons will give the lamps their individuality and unusualness.

We recommend watching a video that demonstrates workshops on assembling a floor lamp from improvised materials. Learn how to make a beautiful floor lamp from a washing machine drum, as well as a table model from paper plates:

Such unusual ideas will allow you to create a lamp for any room interior. The advantage of a homemade floor lamp is that no one will have such a product. It will be special and personal. Moreover, you can make not only floor lamps, but also build a desktop lighting fixture that can be placed near the bed.

So we looked at how to make a floor lamp with your own hands at home. We hope you liked the provided photo and video examples, as well as master classes and inspired you to make a homemade lamp from improvised materials!