Lacquer for terraces made of wood for outdoor use. Terrace oil: characteristics, advantages, application features Terrace varnish

Without exception, all the owners of suburban housing are trying to create the most comfortable and as "live" atmosphere around them as possible in a civilized environment. This cannot be achieved without the use of natural wood, since neither concrete nor ceramics can convey the natural beauty and tactile sensations that arise when in contact with natural wood. Despite the fragile beauty of wood, there has been a worldwide increase in its popularity, which is understandable even given that it is not the most ideal choice in terms of price-life ratio. It is no secret that any wood, and especially wood that is outdoors, needs protection from moisture, which provokes the development of fungus, which causes decay, and ultraviolet radiation, which contributes to the fading of wood, which subsequently acquires a silvery gray color and gradually collapses. Despite the fact that exotic woods (merbau, massaranduba, bangkirai, etc.) are much denser than traditional softwoods and more resistant to abrasion and environmental damage, they also need proper care, which will extend their service life. To date, there are enough means and methods of processing wood, which will preserve and even improve its quality as a building material. However, among them there are not many options to protect it so that the material retains not only its most valuable qualities, but also its naturalness. At the same time, it is important to note that varnishes and oils used for wood treatment inside residential premises are not suitable for protecting wood in open areas, since they will not provide adequate protection of wood from adverse climatic factors. In this regard, manufacturers have developed a special oil for terraces, which will not only prevent the deformation of wood, but also give it a special shine, emphasizing the natural structure of the material.

Terrace board: how to save wood?

Most owners of private houses are probably faced with the need to annually replace the floors on the terrace, which is associated with the peculiarities of its location, namely, the terrace is an open space that is constantly exposed to ultraviolet radiation, temperature and humidity changes, as well as precipitation. Some experts argue that proper installation can solve the problem of the preservation of wooden floors. For example, if during the laying of terrace boards, leave a gap of at least 3-5 mm between them, this will prevent the accumulation of moisture and promote ventilation of the floor, which will prevent the development of decay for some time. Despite this, it becomes obvious that even the most correct installation is not able to provide complete protection of untreated wood from destruction, and therefore, it is necessary to use special paints and varnishes, which must be selected depending on the type of flooring. Currently, the market is replete with a variety of high quality materials that can create a stable coating and reliable protection for decking exposed to negative factors. However, it is important not only to choose the right material, but also to properly prepare the decking before processing.

Terrace floor oil: the main varieties and advantages of the material

Among the paints and varnishes intended for the treatment of outdoor wooden terraces, recently the leadership has been held by oil for terraces, the price of which corresponds to its quality. Inexperienced craftsmen ask themselves the question: “Why impregnate wood with oil, if you can varnish it in the old fashioned way?” However, varnish is characterized by a significant drawback - the formation of a durable airtight film, which wears out over time, exposing the wood to adverse destructive factors. Unlike other paints and varnishes (primarily varnishes and paints), terrace oil does not create a strong film on the wood surface that disrupts the air exchange of the wooden surface. Despite this, it deeply impregnates the wood and provides reliable protection of the wood from the inside, leaving its pores open, which is the key to effective air exchange. The effectiveness of terrace oil is due to the fact that it fills any inevitable cracks and small defects in wood, giving it water-repellent properties and significantly increasing its wear resistance. Its ability to polymerize (oxidize under the influence of air) provides reliable protection of wood even from sea water.

While preserving the natural moisture exchange and increasing the service life of the terrace board, the oil protects the wood from rotting and ultraviolet radiation due to the active additives included in its composition. Due to the absence of a durable airtight film on the wood surface, under the influence of temperature fluctuations, it can change in volume without peeling and cracking the coating itself.

An important advantage of terrace oil is its ability to preserve the original color of wood without distorting its natural pattern, but only emphasizing its natural structure. Thanks to this unique feature, wood treated with oil retains its warm appearance with a deeper matt sheen than traditional varnish.

The scope of terrace oil is quite extensive. It is used not only to treat the surface layer of decking, garden parquet and other boardwalks exposed to moderate humidity, but also to protect wharves, piers and other large objects. During processing, oil is applied to both horizontal and vertical surfaces, while the frequency of processing is a variable parameter and depends on the type of wood being processed and the climatic conditions in which it is located. It is important to remember that the treatment of the terrace board with an oil composition must be carried out immediately after its laying.

Currently, the construction market offers a wide range of oils used for wood processing, the choice of which directly depends on your needs at one time or another. There is an oil on the market, which includes additional components:

Oil with natural wax;
Oil, which includes colorants;
Oil with antibacterial additives;
Oil formulations characterized by an anti-slip effect.

Terrace oil: popular producers

The consumer market is replete with oils from various manufacturers, each of which is characterized by its own advantages and disadvantages. Before you buy oil for the terrace, we suggest that you familiarize yourself with the most popular and competitive brands on the domestic market.

Osmo Anti-Rutsch: terrace oil with anti-slip effect

Terrace oil Osmo Anti-Rutsch is a German manufacturer offering the widest selection of oil coatings with various combinations of ingredients. In most cases it is used as a finishing coat on the top side of the boardwalk, after it has been pre-treated with tinted oil. The composition is based on natural vegetable oils (sunflower, thistle, linseed and soybean) with the addition of special organic water-repellent additives, characterized by high density and evenly distributed in the coating, which, after drying, prevent slipping. It can be used for the purpose of preventive protection of wood from mold, rot or blue stain. It is characterized by ease of application, without drying out during processing. The protective silky-matt coating, which is formed after the oil dries, has an anti-slip effect, does not crack, peel or peel during operation. Can be applied without pre-polishing the surface.

Specifications of Osmo terrace oil:

Scope of application: painting garden furniture and wooden terraces, including those made from exotic woods that need protection from dirt and moisture;
Properties: resistant to ultraviolet radiation, protects the surface from changes in temperature and humidity, gives water-repellent properties, and also prevents the appearance of mold, blue and rot;
Number of layers providing effective protection: for previously unpainted wood - 2 layers; no more than 1 coat is required as a topcoat on a pre-tinted surface or re-oiling;
Drying time: at an optimum air humidity of 50% and an ambient temperature of +23 degrees, the drying time does not exceed 8-10 hours;
Material consumption: depends on the structure and properties of the wood, as well as on the preparation of the surface. On average, 1 liter is enough to process 20-24 square meters. meters of surface, subject to the application of oil in one layer.

Terrace oil Neomid: a brief description

High quality wood protection oil impregnation based on natural oils. It consists of polymerized oil, technological and fungicidal additives, as well as a UV filter that provides surface protection from ultraviolet radiation. It can be used not only for the primary processing of terraces, bridges or wooden balconies, but also for the restoration of products previously treated with oil. Terrace oil Neomid contributes to the formation of a protective coating on the surface of the wood, resistant to household detergents and moisture. Due to the fact that it protects against the appearance of wood-destroying fungi and blue stain, it increases the service life of wood, while maintaining its original appearance. A distinctive feature of Neomid oil is the ease of application. The protective coating after applying the oil does not peel off, does not peel off and does not crack.

Before applying Neomid terrace oil, it is necessary to prepare the surface by cleaning it from dirt, wax and previously applied paints and varnishes. If you are applying oil for the purpose of restoring a previously applied oil coating, the surface must be sanded down. If you process hardwoods, they must first be cleaned of natural oils and resins with a rag soaked in an organic solvent. Before applying the impregnation, the surface must be thoroughly dried, as the moisture content in the wood should not exceed 18%.

Technical characteristics of Neomid terrace oil:

Scope of application similar to that for terrace oil of any manufacturer;
Properties: increases the resistance of the surface to ultraviolet radiation, prevents the appearance of wood-destroying fungi, mold and blue stain, gives the surface water-repellent properties, so that rainwater does not penetrate into the wood structure, but rolls down on its surface in the form of drops;
Number of layers: terrace oil with a brush should be evenly distributed along the wood fibers in 1-2 layers until the material is completely saturated. An hour after application, excess oil is removed from the surface with a dry cloth;
Application conditions: oil is applied at an ambient temperature of at least +10 degrees;
Drying time: begins to dry to the touch after 6 hours, while the final drying of the surface occurs after 24 hours. This is relevant under certain conditions (ambient temperature is not lower than 20 degrees, and relative humidity is not more than 65%);
Consumption: depends on the porosity of wood and its other characteristics and is 1 liter for every 10-20 square meters. meters of surface under the condition of single-layer application;
After using working tools and containers, they must be cleaned with white spirit immediately after finishing work.

Important! The oil composition is flammable, and therefore, during its application, it is forbidden to use open fire and smoke.

Terrace oil v33: fundamental properties

V33 Terrace Oil is a special oil formulation based on urethane alkyd resins with added UV filters to provide maximum protection to wooden surfaces. It was developed by experts to protect wooden surfaces and floorings that are under constant influence of ultraviolet radiation, excessive moisture, as well as various types of pollution, including grease. Thanks to a specially developed oil formula, wood treated with this composition acquires high water-repellent properties and resistance even to chlorinated pool water due to the formation of a microporous coating that does not interfere with the material's air exchange. Wood treated with this composition not only retains its valuable qualities, but also demonstrates its natural appearance.

The scope of use of the terrace oil of this manufacturer is quite wide, since it can be used to process both European and exotic wood species. Moreover, it is perfectly compatible even with autoclaved wood.

Before starting work, mix the product thoroughly and carry out a quality preparation of the wood so that it is absolutely clean and dry.
If you have to process hard wood, sand it thoroughly before applying the terrace oil, then remove all dust;
If you are working on old wood, pre-clean it with the v33 patio cleaner;
As for the surface of previously untreated wood, its treatment is carried out as follows:
Using a flat brush or roller, the first layer of oil is applied in such a way that the wood is abundantly saturated. After 15 minutes, without waiting for the first layer to dry completely, a second layer of oil is applied to the wet surface and wait another 15 minutes. If after this time the wood does not absorb oil, you can be sure that it is effectively protected. Then, using a lint-free cloth, remove excess oil and leave the surface to dry completely, which will take at least 24 hours.

Important! If you plan to repair an old coating, there is no need to completely treat it with an oil composition. It is enough to apply oil in 1-2 layers only on worn areas.

Pinotex wood protection terrace oil: what the consumer needs to know?

Pinotex terrace oil is used when it is necessary to protect wooden surfaces in order to enhance their protective characteristics. Terrace oil of this manufacturer provides effective protection of the terrace board from atmospheric and biological influences, including fungus, mold and insects. In addition, the tool maximizes the life of the material and reduces the level of wear.

The scope of Pinotex terrace oil does not have any fundamental differences and includes the processing of wooden terraces, steps, platforms, stairs, balconies and other wooden structures. The oil of this manufacturer has proven itself to be the best among oils intended for processing previously impregnated wood. It has been successfully used to protect oak, cedar, larch and spruce surfaces.

In the process of applying terrace oil, it is important to follow the recommendations of experts. Here are the main ones:

Before applying terrace oil, carefully prepare the wood surface, it must be dry and clean;
Before impregnation, treat the surface of the terrace board with a primer;
In the process of applying the oil, it is necessary to constantly mix it; to achieve the greatest effect, the oil is applied in two layers;
To maximize the effectiveness of terrace oil, experts recommend the use of various pigments that improve the protective properties of terrace oil.

Main technical characteristics of Pinotex terrace oil:

Working temperature ranges from +5 to +35 degrees;
Drying time at a temperature of +23 degrees and a relative humidity of not more than 65% is no more than 6 hours, while the second layer is recommended to be applied after 12 hours after applying the first;
It is supplied to the retail network in containers of 2.25 and 2.5 liters.

Tikkurila Terrace Oil: Valtti Terrace Oil Range

Terrace oils of the Valtti line from Tikkurila will reliably protect and renew wooden surfaces that are constantly exposed to aggressive environmental factors. Tinted terrace oils will not only protect the surface from moisture and dirt, but also slow down the process of cracking and graying of wood. The main representatives of the Valtti line are the following products:

Valtti terrace oil, which is an solvent-based oil impregnation for the treatment of exterior wooden surfaces, including heat-treated wood. Consumption - 5-7 square meters. m/l;
Terrace oil Valtti Aqua- water-borne oil impregnation made on the basis of natural oils with a similar scope and consumption;
Terrace oil Valtti Non-Slip- water-borne oil impregnation, which gives the treated wood a rough texture and reduces the slipperiness of the wooden surface after rain. Consumption - 8-12 sq. m/l.

Alpina terrace oil: information for consumers

Alpina water-borne patio oil is water-based, without the use of organic solvents, making it practically odorless.

Like other oils, it reliably protects wood from moisture and dirt, including grease, and also significantly extends its service life, increasing resistance to abrasion. Refreshing the color of wood, highlights its natural texture. As for the recommendations for applying oil for Alpina terraces, they are similar to the previous ones.

Garden furniture that is outdoors all year round, as well as terraces and piers, are recommended to be treated with wood oil: Valtti, or Valtti Aqua.

Heat-treated surfaces can be coated with oil, glaze preservative or other products designed for wood. Tikkurila glazing compounds and oils can be tinted to match 318R heat-treated wood.
Rust-prone parts of the berth above the water are recommended to be treated with Rostex Super and Miranol compositions, or with a special alkyd helmet Unica.
It is recommended to always choose a tinted material, as a glazing antiseptic, colorless varnish or oil does not adequately protect the wooden surface from sunlight.
The oil treatment brings out the natural color of the wood.
Furniture that is outdoors all year round, as well as terraces and piers, it is recommended to treat with oil and wax 1-2 times a year.
Previously oiled surfaces should be treated with oil.
Attention! Observe safety precautions when applying protective compounds for wooden surfaces. Read label instructions and product specifications before use.

Before painting

The moisture content of wood should not exceed 18%. Too high moisture content of the wood leads to poor absorption and adhesion of the paint, which can subsequently lead to peeling of the paint layer.
The optimum temperature in the room to be painted is + 15-20 °C, and the relative humidity is 50%. The moisture content of the treated wood should not exceed 20%.
Wash moldy areas with Homeenpoisto diluted 1:3 with water. Apply the solution from bottom to top. Let the composition work and rinse with plenty of water using a brush from top to bottom. After washing, the surface requires technical repair. Protect glass surfaces before washing.
Before starting work, carefully read the instructions on the label.
The optimal weather for painting work is windless, warm and cloudy.
When processing wood with glazing compounds, the final color of the surface depends on the type of wood, its hardness and initial shade, as well as on the number of layers. To determine the final color, it is recommended to carry out a trial painting!
When using glazing compositions, the surface is varnished continuously from edge to edge in the direction of the wood fibers in order to achieve a uniform final coating.
A new pressure-impregnated board is recommended to be kept outdoors for no more than six months before processing.
Check the condition of the surface and repeat if necessary.

During coloring

Paints and varnishes are recommended to be thoroughly mixed before use and during painting. Allow Miranol and window paint to reach their thixotropic consistency before applying.
To prevent moisture from entering the wood, carefully treat the end ends with both a primer and a top coat.
For temporary storage, the paint roller or brush can be placed in a plastic bag and tied tightly.

After painting

Allow enough time for the painted surface to dry. Drying of the surface layer of varnish or paint does not mean final drying. Materials usually require from several days to a month to completely dry, depending on the type of material and the thickness of the layer.
Inspect the condition of the treated surfaces annually and carry out the necessary technical repairs in time.
If the paint is not completely used, wipe the edges of the can and close it carefully so that the lid fits into the can to the brim. Turn the jar upside down for a short time, this will ensure that the lid closes tightly. Long-term storage of paint in incomplete or loosely closed containers should be avoided.
Liquid paint residues are recommended to be taken to a hazardous waste collection point. Empty dry containers can be recycled or taken to a public landfill.

When equipping a wooden terrace, one of the important tasks is to ensure maximum protection of wood from any type of precipitation and climatic phenomena, as well as to give all structures an aesthetic appearance. The use of varnishes for outdoor work is the most acceptable in such cases, as it allows you to fully preserve the appearance of the wood texture and emphasize its texture.

Why it is beneficial to use wood deck varnish for outdoor applications

Buying a terrace varnish to protect wooden structures is beneficial for the following reasons:

increased resistance to abrasion and mechanical damage;
simple application technology;
excellent decorative properties, emphasizing the texture pattern of wood;
increased resistance to moisture;
improved fire safety;
unpretentiousness during operation;
the minimum coefficient of thermal expansion, preventing cracking and destruction of the protective layer.

The main types of varnishes for wooden terraces for outdoor use

Lacquer for terraces is a special solution that has excellent adhesion to wooden surfaces and is able to form a continuous protective film. It is made on the basis of one of the following components:

oils;
polyurethane;
alkyd resins;
solvents.

Polyurethane varnishes for decking are fast hardening compositions that within 4-8 hours are able to create a durable outer layer that is resistant to temperature extremes, mechanical stress and ultraviolet radiation. Oil formulations are distinguished by a natural composition, similar strength characteristics to polyurethane, but an extended solidification period of up to 2-3 days.

Attention! Before applying any type of varnish, it is important to properly prepare the surface: clean it of dirt, remove grease stains and dry it from water. Only in this case, a continuous reliable protective layer with the necessary technical and operational characteristics is formed.

Alkyd varnishes for decking are highly resistant to chemicals, as well as the ability to slightly darken the natural shades of wood, making its fibers more expressive. Solvent-based formulations offer minimal wood protection, have a long drying time, but at the same time their cost is minimal.

In our online store you can buy a wide range of terrace varnish from well-known manufacturers at competitive prices. All product lines are certified and fully meet modern quality standards. If necessary, our experienced specialists will help you make the right choice and give recommendations for use.

The open veranda in the house provides many opportunities for summer outdoor recreation. In the evenings, joint tea parties can be arranged here. Rest in the open space is not only pleasant, but also useful.

When caring for an outdoor terrace, some problems may arise. Since the suitable material for the construction of the veranda is wood, special means are required to protect it. They are able to protect the tree from moisture, temperature changes and fungus. To figure out how to paint the floor on an open veranda, you should familiarize yourself with the features of creating such structures.

Features of the floor on the verandas

Many owners of private cottages and dachas are forced to repair the flooring on the veranda every year. This is due to the influence of various factors during operation. In addition, weather conditions are also important factors. Outdoor verandas cannot be protected from the effects of weather. In such conditions, even reliable and durable materials can be destroyed.

When choosing the right technology for laying wooden floors on the veranda, they last much longer. The tree will not collapse for several years, as is the case with improper processing. For example, if the boards are laid with a gap of 5 mm, the structure will be less susceptible to moisture. The flooring of the veranda will be well ventilated. The boards will not absorb moisture, which will reduce the chances of rot.

It must be borne in mind that even with the ideal installation of the boards, the unprepared wood of the veranda flooring will not be protected from destruction. Various paints and varnishes are selected depending on the type of coating to be laid. Usually the floors on the verandas are made of pine. It should have a natural moisture level. If the budget allows, you can pay attention to the terrace board for the veranda. It is made from wood chips and polymer compounds. To understand how to paint a wooden floor on a veranda, you should understand the features of different compositions.

There are many quality materials on the construction market. When using them, you can create a reliable cover for the veranda. It is very important not only to choose materials, but also to prepare the floors of the veranda for further processing.

Types of coatings for the veranda

Even varnishes with high resistance are not intended for external work when processing the floor of the veranda. They cannot be used for processing open terraces. For this purpose, special compositions are being developed. They have several additives that allow you to counteract temperature extremes and ultraviolet rays. Among them are the following groups:

yacht varnishes;
terrace oils - they are often used to treat verandas;
chlorinated rubber paints.

Materials from each group differ in their application features. You need to understand their pros and cons. They need to be considered in detail. In addition, care must be taken to create the correct design of the veranda. This will ensure its safety for many years.

Regardless of the presence of a visor over the veranda, its surface is still exposed to precipitation and sunlight. One of the active reactants is water. This means that when designing a veranda, it is necessary to minimize its delay on the surface.

This goal can be achieved with the use of water-repellent coatings. The veranda flooring is protected from water exposure and the choice of the correct floor structure is ensured. Between the boards it is necessary to leave gaps of 3 mm. Through them, water will be drained from the veranda.

What wood should be chosen for the construction of an open veranda? For this purpose, soft and hard wood can be chosen. Hardwood has an attractive appearance, and has many useful properties. However, the price of such wood is quite high. When building a veranda from such boards, you will have to pay a considerable amount.

Soft varieties are cheaper. Their list includes pine, larch and spruce. These boards are much easier to handle. When using antiseptics and paintwork materials, you can make such a floor durable and reliable.

It is also important to understand such an indicator of wood as operational safety. If it gets wet and there is dirt on the surface of the wooden elements, the floor becomes slippery. To increase the safety of using such a coating, it is necessary to choose boards with longitudinal grooves for the construction of the flooring. This will increase the friction coefficient of the surface.

Before applying any coatings, it is necessary to dry the wooden products. In addition, they need to be sanded. The surface of the boards should be perfectly flat. This will make them more attractive. Thanks to this, a better adhesion of the tree to the paintwork used will also be ensured.

Yacht varnishes

The advantages of yacht varnishes include: good stability, high permeability into the pores of the material, resistance to ultraviolet radiation. The composition of the yacht varnish contains an alkyd-urethane mixture. It is used to cover outdoor structures. Lacquer Benefits:

Resistance to environmental influences. This applies not only to water, but also to pollution. When dry, the varnish begins to repel dirt.
Penetration into cracks and pores of wood. Thanks to this property, wood is completely preserved in varnish.
Resistance to ultraviolet radiation. The tree is able to retain its natural shade for a long time.
When using a yacht varnish, the protective layer is transparent. This allows you to emphasize the natural pattern of the tree.

Before applying such coatings, it is better to dismantle the veranda boards. This is necessary for sanding them with sandpaper. Then the varnish should be applied in 2-3 layers. After each application, wait 4-5 hours.

One of the significant disadvantages of yacht varnish is the loss of elasticity in case of exposure to low temperatures. For yachts that sail in warm seas, this is not a problem. However, when processing the floor on the veranda, the annual effect of frost on the wooden floor should be taken into account. With the loss of elasticity of the tree, the consequences can be unpleasant. In this case, the varnish composition will need to be applied after a year of operation of the flooring.

Chlorine rubber paint

This composition is also called enamel. Use it to cover plastic and wood surfaces. Enamel is usually used in the processing of ship elements. Enamel is highly resistant to moisture and temperature extremes. Therefore, it is also used to cover the wooden decking of the verandas. There is no lead or chromium in this paint.

One of the significant disadvantages of such coatings is opacity. However, enamel hides various surface defects well. If you need to protect the wood, chlorinated rubber enamel is a good choice. It is necessary to apply paint in 2 layers. Between applications, you must wait about 8 hours. Paint the floors with a wide brush. It can penetrate even minor surface defects. To make the effect much better, the surface should be pre-primed.

Important! One of the advantages of chlorinated rubber enamel is high reliability. Such coatings can serve more than one season without renewal.

Composition selection

With proper preparation of the floors, as well as their subsequent treatment with antiseptic agents and primers, the floors will last as long as possible. Photos of treated surfaces will help you choose the optimal composition.

The tools that paint the floor on the veranda are divided into the following varieties:

grinder and sandpaper;
putty knife;
brushes and rollers;
solvent;
primer with antiseptic properties;
floor protection materials.

Gradually, it is necessary to select all the materials that will be useful for painting the veranda. Standard enamel perfectly protects the floor only in enclosed spaces. Terrace decking treated with such materials will not last more than one season.

The best option for choosing a composition for covering the veranda is terraced oil. It is recommended to be used both on terraces and on marinas. There are many modifications of this protective material. They are used for different purposes. For example, some are used when painting boards that are not intended for quick laying.

If you want to preserve the natural beauty of wood, as well as protect it well. For this purpose, a stain is used. It combines high-quality impregnation and varnish coating. In this case, the surface to be treated is prepared with a waterproof varnish and impregnation. You need to prepare for the fact that the varnish will be expensive.

You can preserve the natural pattern of wood. Usually yacht paint is used for this purpose. Acrylic compositions can also be selected. Preliminary floor preparation involves surface treatment with a glazing or antiseptic primer. When using paint to cover the verandas, follow the manufacturer's instructions exactly.

Preparation for processing

The key to long-term operation of the flooring of the veranda is careful preparation. If the floors have already been painted, the old coating should be removed from the flooring. If this is difficult to do, you can use the CM-1 emulsion.

Before painting the floor, it is necessary to get rid of all wood defects. With prolonged exposure to sunlight and moisture, the material becomes black-gray. Bacteria and various wood imperfections can be removed using a grinder. Work is carried out until a light shade appears. Boards that are damaged must be replaced.

To protect wood, you can use different materials that differ in application technology. If it is decided to use an antiseptic primer, the floors must be opened and wait until they dry. It is necessary to open the floors with a primer in several layers. It is necessary that the material is well saturated with the composition. It is necessary that the primer dries after the last application within three days. Only after it has completely dried can the base material be applied.

When applying special impregnation to wooden floors, it is better to choose a protective varnish for further finishing. Depending on the manufacturer, the technology for applying materials will vary.

Coloring

After preparation is complete, coloring begins. With the correct application of paintwork materials, the work is carried out in several stages. Please note that the coating must be applied along the length, and not across the width of the board.

When painting for the first time, the coating must be shaded as much as possible. It should be a fairly thin layer. It will dry for five days. In some cases, it is necessary to wait a week for the composition to dry completely. There should be 2-3 coats of paint in total. Each applied layer of the composition must be dried.

Important! The final stage of painting the floors on the veranda is washing the floor. It must be done using hot water.

In order to extend the life of the floors on the terrace, they must be carefully looked after. By following a certain list of actions, the risk of deformation of the protective coating can be reduced.

In winter, the veranda is not used. Therefore, the floor must be covered with plastic wrap. To prevent slipping, it is necessary to lay mats in the passage area.

It is especially important to take care of the choice of material for creating the floor. Hardwoods have the highest resistance to external influences. However, they are very expensive. Softer woods dry out faster and are more prone to rot.