How to Remove Nokia Lock Code: Emergency! How to remove security code on nokia.

Nokia mobile phones have a large base of loyal fans around the world. Nokia is always a guarantor of quality and wide functionality of devices. Even with the transition of the company's phones to devices running Windows Phone, nothing has changed - Nokia phones remain among the best in their class, and at the same time offer a nice design, good build and low cost.

However, users who are not previously familiar with Windows Phone devices may experience some difficulties, especially if they have accumulated a lot of experience with simple push-button Nokias. Sometimes it happens that not everyone can even unlock a Nokia phone at once. Difficulties begin even when a pin code was set on the phone, and then it was forgotten. Each of these cases deserves separate consideration.

Quick article navigation

Screen lock

Any modern touch-enabled smartphone has a lock screen, which can be considered an analogue of a locked keyboard on push-button devices. The phone locked in this way is on and ready to receive calls and other tasks, but will not respond to user actions until it is unlocked, protecting it from accidental clicks.

To unlock your Nokia phone, you must first press the power button to make the screen light up. Then you need to touch the screen at the bottom of it, and without raising your hand, slide your finger up, as if "brushing" the date and time from the screen. After such an action, the screen will go out for a moment and light up again, displaying the desktop. If your phone has a pin code, you will first need to enter it.

Reset

In the event that the pin code that was set to protect the phone is forgotten, then all that remains to be done is to reset the phone and reinstall the system on it. It is not possible to bypass the blocking in other ways. It is important to understand that when you reinstall the system on the phone, all content recorded in the memory may be lost, therefore, if the phone has the function of connecting to a computer as a flash drive (all phones based on Windows Phone older than version 8), then you should first backup .

In order to reinstall the software on your smartphone, you will need:

• Open a browser on your computer.
• Download the Windows Device Recovery Tool from the official Microsoft website at go.microsoft.com/fwlink/?LinkID=525569.
• Run the downloaded file.
• Confirm the installation of the application and wait for the procedure to complete.

After the program is installed, you can run it and begin the procedure. The user needs to connect the smartphone to the computer via a USB cable and wait for the corresponding sound signal to appear. When the phone is detected by the program and identified, you should click on the "Start" button and just wait for the reinstallation to complete.

The human memory is the most extensive data storage in the world and the most unreliable. What to do if you forgot your PIN and how to unlock your Android or iOS phone if you forgot your password. The whole complexity of the situation lies in the fact that the device usually stores the necessary or important data and contacts, which you don’t want to lose at all.
At the same time, hacking the hardware protection of modern smartphones and tablets is quite difficult.

And in some cases, on the contrary, the data is not as important as you need to unlock your phone in order to use it corny. I want to give a few tips that any user can follow. And if they don’t help, you just have to carry the gadget to a service center.

Android Smartphone Unlock

The recommendations below are very dependent on the installed version of the operating system and on what additions the smartphone manufacturer has made to it. However, each one is worth a try.
On the now old version of Android 4, unlocking a PIN or pattern can be quite simple - after several attempts to enter incorrectly, you will receive a link to restore access. And if you remember the password for the Google account that is on your phone, then you can easily unlock it via remote access! Here the truth is worth a reservation - the smartphone must be connected to the mobile Internet or to a WiFi network.
Another way that works on newer versions of the operating system is Android remote control. It is available here - link. This is a very convenient and quite functional tool with which you can track your device, as well as manage it from a computer.

To unlock your phone, first select "Lock" and set a new password. Then unlock and go to the device with a new password. Profit!

There is a special proprietary utility for Samsung smartphones and tablets Dr. Fone. It also allows you to restore access to the operating system of the phone, reset the graphic password or block the SIM card.

Sometimes you can unlock Android as follows:

1. At the bottom of the screen, click on "Emergency Call".
2. Enter the symbol "*" ten times
3. Double-click on the entered character string and select "Copy".
4. Paste the copied characters at the end of the already entered asterisk sequence.
5. Repeat the action. This should be done until the machine fills the entire length of the field and refuses to insert characters. The result will be a copied long-long line of asterisks.
6. Return to the lock screen. Open the Camera app by swiping up from the bottom of the screen.
7. Open settings by clicking on the gear icon.
8. Android will require you to enter a password. Click on the field and hold until the "Paste" command appears. Paste the copied asterisks into the input field.
9. Repeat the procedure until the screen is unlocked and you can access the system again.
10. Profit!

In the case when you need to unlock the phone in order to use it and the data is not important, you can reset it to factory settings through the boot menu of the device.

To do this, turn off the device, hold the volume rocker down along with the power key. We keep them in this state until the phone boots into Recovery mode. Select the "wipe date/factory reset" option. After that, the device should reset all current parameters and settings, which will help to unlock it through a pin code or pattern!

How to unlock iPhone

With "apple" phones from Apple, things are even more complicated. The way to unlock the device depends on which version of iOS is installed on the iPhone. Based on this, you need to look for vulnerabilities on the Internet that allow you to bypass the blocking.

Here is another option on how to unlock iPhone:

If there are no other options besides resetting to factory settings, you can try this option. An iPhone reset can be done through the iTunes application directly from a computer to which you will need to connect your phone with a cable. Of course, all data will be erased.

This article offers you several ways to reset the security code on your Nokia smartphone. Each phone from this company comes with a default code of 12345. If you care about the security of your smartphone or the personal information it contains (such as contacts, photos, or anything else important), this feature may be a must. You can make settings on your phone in such a way that access to the SIM card will be blocked for third parties.

Therefore, it is important to change the default code. This way you protect your device. However, it happens that some users forget their Nokia security code. Often this is due to the fact that they are not used too often. If this happens, Nokia Support will not be able to help you recover the code. Therefore, there will be nothing left but to disable this security feature.

How to reset the first way

You can perform a hard reset on your gadget. This is not exactly the same as a factory reset. Such a hard reset will delete all data present in the phone's memory. Therefore, if you have access to the contents of your smartphone (if it is not locked), please follow And also make sure that the phone's battery is fully charged before performing a hard reset.

Settings

To reset the security code on your Nokia in this way, press and hold the 3 keys below at the same time:

• For classic style phones - call button + * + 3.
• For fully touch phones - call button + Exit button + Camera control.
• For touchscreen phones with QWERTY keyboard - left SHIFT + SPACE + BACK.
• For Symbian ^ 3 C7, E7, C6-01, X7, E6 phones) - volume down button + camera + Menu.

After the indicated key combinations are held down, press and hold the Power button until you see the "Formatting" message on the screen. Release all buttons and wait until formatting is complete. After this operation is completed, all data from the phone will be deleted, including the captcha.

How to restore the security code in Nokia: the second method

It is possible that this method will not work with your phone. But it is worth trying before doing a hard reset of the device, since information is not deleted when using it.

Download and install Nemesis Service Suite (NSS). Do not install it on the C: drive, as it may cause problems with the PC. It is better to choose drive D.

Connect your smartphone to your PC using Ovi Suite or PC Suite mode. Close Ovi/PC Suite if the service will start automatically. You don't need it.

Open the Nemesis Service (NSS) package. Click on scan to search for new devices (upper right side of the interface). Select Phone - Persistent Memory - Read.

Now the program will read the contents of your smartphone's memory and save it on your computer. To view this data, navigate to the Nemesis Service Suite (NSS) installation directory and then to D:NSSBackuppm. In this folder you will see a file named (YourPhone "sIMEI). Right-click on it and open it with Notepad. Now find it in this file. On the 5th entry (5 =) in the section you will see the password. It will look something like this: 5 = 3 1 3 2 3 3 3 4 3 5 0000000000. Delete all the digits one by one, starting with the first (first, third, etc.) Then remove the zeros written at the end. In this example Nokia's standard security code is encrypted - 12345.

More and more often I meet a bunch of unanswered questions on the Internet about blocked nokies, but I myself did not know the troubles until I encountered a similar situation. What did I do? Useful in the search of course with similar queries. I spent 4 hours until I found the answer I needed. Somehow they brought me a nokia e90 with Finnish firmware without a Russian-language keyboard, the phone had not been produced for a long time, and I thought that unlocking answers would be much easier than with modern models, but I had to make an effort. In this article, I will consider the basic techniques for unlocking phones of this brand. And here I will consider only 3 ways, really working, fast and reliable. After all, we are considering ALREADY blocked phones. And even a computer will not see locked phones when connected to a computer via usb.

1. Unlock with a master code.

The master code is a universal, secret phone code and is entered instead of the usual code.

The master code is determined based on the IMEI identifier of the cellular device, and therefore it is individual for each phone.

The mastercode has been tested on the following Nokia models:

2100, 2650, 3100, 3120, 3200, 3210, 3220, 3230, 3300, 3310, 3315, 3330, 3350, 3360, 3390, 3395, 3410, 3510, 3510i, 3520, 3650, 3660, 5100, 5110, 5130, 5140, 5146, 5190, 5146, 5190, 5210, 5510, 6020, 6021, 6030, 6090, 6100, 6101, 6102, 6108, 6110, 6130, 6170, 6200, 6210, 6220, 625, 6230, 625, 6230, 625, 6230 6340,, 6360, 6370, 6500, 6510,, 6590,610,690,610,600, 6,690,610,610,610,610,610,620,620,620,620,620,670,670,670,670,670,670,6800, 6810, 6820, 7110, 7160, 7190, 7200, 72,090, 7200, 72,09,7260, 7270, 7280, 7600, 7610, 7650, 7700, 7710, 8210, 8250, 8270, 8280, 8290, 8310, 8390, 8510, 8800, 8810, 8850, 8855, 8890, 8910, 9290, 9290, 9290, 9210, 9290, 9300, 9300i, 9500, N-gage and N-gage QD

If you have found your model in the list, then feel free to follow the link, enter your IMEI in the field (for those who do not know IMEI can be checked by typing *#06# or look under the battery on the sticker), then check the confirmation box that you are the owner of the phone, and we get a code that should unlock your pet.

2. Bypassing the battery contacts with a resistor. (to switch to test mode)

Since a locked phone is not detected by the computer, you need to put it into test mode and do whatever you want with it.Perhaps the most reliable way to unlock for service centers and at home, if you have resistors on hand and about an hour of time. In order not to go into details, look at the picture and immediately understand what kind of resistors we are talking about.

The main condition is that the resistance of the resistor should be in the range from 4 to 10 kOhm. I found on hand only a 2.1 kΩ resistor. But he came up, I just took these 3 pieces and connected them in series, that is, it turned out 6.3 kOhm.

Then we bend the ends of the resistor contacts somewhere by half a centimeter, and insert them into the central and negative contacts of the battery (not in all models, the main thing is not into the positive contact), insert the resulting assembly into the phone and turn it on. The phone should blink the screen a couple of times and the firmware version and a large test mode inscription will appear, which means that most of the work has already been done. In this test mode, we connect the device to the computer using

in cell phones" Nokia"There are several types of blocking: blocking the phone under the operator, blocking the SIM card, as well as blocking the phone's memory. When unlocking the protective code of each type, you need to follow a specific sequence of actions that provides unlocking in case of loss of the protective code.

Instruction

When the phone is locked Nokia"under the operator, you should contact the mobile operator under which the phone is locked. This type of blocking exists to prevent the phone from being used in the network of an operator other than the original one. When contacting the operator, request an unlock code that will allow you to talk by inserting another SIM card In case you fail to get the unlock code, a flashing will be required.

To flash your phone, you will need a data cable, drivers and synchronization software, as well as flashing software and the actual firmware you plan to use. Firmware is software that is responsible for the full functioning of a cell phone. Synchronize the phone with the computer using the data cable, then upload the firmware. Be sure to fully charge the battery before starting the operation, and also copy all personal information to the computer.

When blocking a SIM card, pay attention to the card from the SIM card. It should contain a pin code and a pack code. In case you forgot your PIN code, enter the one indicated on the card. Otherwise, enter the pack code, which will allow you to reset the forgotten pin code and enter a new one. If these attempts fail, contact your operator's service center to get a new duplicate card of your blocked SIM card.

If the phone is blocked, you will need to reset all phone settings or reset the firmware, or reflash the phone. To obtain special codes for a settings failure or for resetting the firmware, contact the service center. Please be aware that all of your personal data may be erased when using these codes. To flash your phone, use Step #2.

Pin- the code- This is an analogue of the password that is used to authorize the SIM card holder when the mobile phone is turned on. The owner is usually given several attempts to enter a security the code a. If they were entered incorrectly, the SIM card is blocked. These are the basics of using a mobile phone, which are known to every owner. In addition to the pin the code and there is another password - Security Mastercode, which blocks access to some functions. Therefore, situations where you need to remove the protective the code, are very common.

You will need

• Nemesis Service Suite
• Nokia Unlocker
• Drivers for USB cable version 6.85
• Cable CA-53

Instruction

To remove the protective the code(pin- the code), do the following (for example). Go to the menu item "Tools", then - "Settings". Select the option "Protection" - "Phone and SIM". In the list of settings that appears, select "Request the code and PIN" - disable.

If you bought a Nokia phone with your hands, over time it may well turn out that some of its functions and settings are blocked by an additional digital password that you do not know. To remove the protective the code, go to the site http://nfader.su/. In a special field, enter the IMEI of your device and confirm by ticking that you are the legal owner of the phone. After pressing the Generate button, you will see in a special field the Security Mastercode of your device.

If this does not help, follow the next procedure to find and remove the protective the code:
Uninstall the Nokia Connectivity Cable driver and restart your computer to install the 6.85 driver. Restart your computer again.
Launch Nokia PC Suite and connect your phone via cable in PC Suite mode. Wait for the phone to be recognized by the program, then close PC Suite by unloading its icon from the system tray about the clock.
Install NSS. The first time you run it, you will be prompted: Please select from the following Service device you will be using after the installations. Select Virtual USB device-.
At the top right, click the button with a magnifying glass (Scan for new device). Select Phohe Info and then in a new tab, Scan. On the left side you will see Phone version and Phone IMEI information.
Go to the Permanent Memory tab, check the To File checkbox and click the Read button. Wait until the end of the process. The result will be saved to a file with *.pm extension.
Launch NokiaUnlocker. Select the path to the *.pm file and click the "Detect" button. At the bottom of the window you will see the code blocking.