How to update interior doors yourself. How to restore interior doors? Carrying out preliminary work

Restoration of an interior door is required when its appearance has deteriorated. The sash can continue to function properly, however, the presence of obvious defects spoils the interior design, and it will not work to mask the flaws with the help of improvised means. Then you can resort to restoration. Such work is carried out subject to a number of rules, since there is a high probability of deterioration in the general condition of the door leaf.

Restoration of the structure is not always performed. It is necessary to take into account the factor that contributed to the deterioration of the appearance of the door. It happens that changes in the surface of the leaf and the structure of the material are irreversible. Causes of defects:

Cracks. They may appear for various reasons. For example, wood tends to dry out. You can update old doors in the case when destructive processes have just begun to develop.
The coating peels off. The surface of the door leaf is deformed if it is sheathed with panels, sheets that are made of a different type of material. This happens due to low adhesion during fastening. Another reason is the natural aging of materials: they deform, dry out, which leads to flaking. In addition, varnish and paint can also peel off. In this case, it is necessary to update the front door, because the absence of a protective layer will lead to an acceleration of destructive processes. Paint is removed first.
Increasing technological gaps. This does not affect functionality, but drafts may appear. In addition, the tightness of the door leaf to the frame is reduced.
Rubbing the end sections of the sash. This is due to the swelling of the tree. Another factor is improper installation, due to which the sash could warp. Rubbing of the door also occurs due to the distortion of the door frame, which is a consequence of the aging of the structure and the material from which it is made.
Excessive load on the frame. At the stage of choosing a door leaf, pay attention to its mass. Given this parameter, loops are purchased. If the door was initially chosen incorrectly, excessive loads act on the box, which will lead to loosening of this structure: the fasteners are weakened, as a result, the sash ceases to function normally.
decay processes. The reason is regular and prolonged contact with moisture. In such an environment, a fungus develops, which leads to a violation of the structure of the material.
Scratches, chips. Such defects are more pronounced in the lower part of the valve. They arise due to careless operation: accidental blows take place, the door opens with a foot.

We determine the expediency

In most cases, it is enough to refresh the design: perform grinding, re-coat. Such manipulations are carried out regularly every few years, because any material needs care, because it tends to age. Sometimes it is impractical to restore the canvas due to significant damage. If irreversible processes develop, it is better not to undertake the restoration of the door. These cases include:

Rotting of the material, and pay attention to the intensity of destruction of the structure. If the fungus has covered the entire thickness of the canvas, it is better to immediately change it to another. With a superficial lesion, interior doors can be updated, but all rot is first completely removed. This is more true for wood products, because metal is affected by rust.
Significant flaws: chips, bumps, distortion of the structure. If there are visible cracks, recesses on the surface of the door, it is not advisable to restore it, because it will be necessary to remove a significant layer during grinding. If you try to restore such defects using leveling mixtures, the result may not meet expectations, especially if there is no experience in such work.
The base (door frame/box) is used for a long period. Dilapidated structures cannot be restored, because the structure of the material from which they are made is gradually destroyed.

Preparation for work

Do-it-yourself restoration of interior doors begins with the dismantling of the canvas. If necessary, remove the box, platbands, slopes. This is done in the case when the basis of the door structure also requires restoration. The sequence of actions at the preparatory stage:

The sash is removed from the canopies. Often this is enough to move the canvas in an upward direction. In rare cases, when dismantling, it is required to remove the fittings. For this, fasteners are drilled.
The door leaf is placed in a horizontal plane. At the same time, the stability of the structure is important.
Remove the door handle, other fittings.
In most cases, removal of the old coating is required: panels, upholstery with soft materials, a layer of paint / varnish.
Plastic doors just need to be washed thoroughly.
All contaminants are removed. You can use a vacuum cleaner, a broom. If the door is wooden, it is not recommended to use the wet cleaning method, because the liquid will swell the leaf, and under such conditions it is not advisable to take measurements.

To update a wooden door, you need to prepare a tool. You will need:

chisel;
hammer;
nail puller;
Sander;
hacksaw;
drill;
screwdriver;
sandpaper;
plumb lines;
building level;
square.

At the next stage, you need to decide on the restoration technology. Then the necessary material is acquired, for which measurements of the canvas and the box are made. You should not be guided by the standard dimensional grid of the manufacturer from whom the product was purchased, because over time the wood dries out and deforms. In the manufacture of plastic and metal doors, there may be errors, which means that in this case it is also necessary to obtain valid measurements.

How to restore a wooden door?

It is necessary to adhere to a clear sequence in actions. To update wooden doors, remove the old coating. Structures made of this material always protect with something, be it paint, varnish, leatherette, leather, panels of various types (veneer, plastic, MDF, etc.). If the coating is not dismantled, it will not be possible to return the attractiveness to the canvas, since the main task in this case is to remove defects from the rough surface of the door.

Before starting restoration work, the product should be prepared. At the first stage, the state of the box is assessed. Restoration of an old wooden door cannot be completed if the frame remains intact. First, the structure is checked for distortions, for which plumb lines, a building level, and squares are used. To align the box, remove the slopes, platbands. The frame is strengthened in two ways: pins; additional fasteners, for which the partition is perforated (the method is suitable for load-bearing walls).

Small scratches from the canvas are removed with sandpaper. Larger defects can be eliminated with grout for sanding parquet, putty. The mixture is applied to the surface with a spatula. A more complex reconstruction process, when you need to remove a hole in the canvas, is implemented using mounting foam. It is important to preserve the color and structure of the wood, so it is recommended to select compositions of a suitable shade. When the substance dries, the surface is treated with sandpaper.

For small but deep injuries, an alternative method is used - dowels. At the point where the hole is in the door, a hole is drilled. Then a dowel is installed, pre-treated with an adhesive. It must be driven into the canvas, thereby increasing the reliability of fastening. At the last stage, the area is treated with grout or putty.

Removing the old coating

To update an interior door, varnish or paint must be removed without fail. Over time, the coating flakes off, so re-painting will ruin the door, because the surface will be inhomogeneous. To remove layers of paint / varnish, any solvents are used, there are special tools or washing compounds. They are applied to the product, wait some time and remove the exfoliated film with a spatula.

You can also update old wooden doors mechanically, for this they use a sharpened plate, with which they peel off the coating, as well as sandpaper. The method of thermal exposure is also used (building hair dryer, soldering iron).

How to upgrade with conventional chip and crack repair?

In this case, it is advisable to use putty, special wax or epoxy glue. The last option is to fill the gap flush with the surface of the leaf, otherwise the door will look less attractive due to uneven coverage. All shallow scratches can be removed with wax or epoxy glue. Moreover, it is desirable to select the material used taking into account the shade of the canvas. If this is not possible, it is better to cover the sash with varnish or paint. Old wooden doors are updated according to the instructions:

leaks, cracks are cleaned of dust;
fill with putty;
level the surface with a spatula;
polished.

Painting

After the preparatory work has been completed, and the canvas is leveled with putty or other material, they proceed to applying the finish coat. The painting process should be carried out in a well-ventilated area or outdoors in dry, sunny weather. If you are restoring a wooden door with your own hands, you should follow the instructions:

Work begins with the removal of dust and priming.
Apply paint/lacquer. This should be done in stages, allowing the material to dry completely. It is enough to leave the door in a well-ventilated area or in the sun for 24 hours. This eliminates the possibility of leaks. To make the coating look attractive, the door is treated with a paint and varnish composition in the direction along the fibers. It is recommended to apply several layers. Moreover, at each stage, the surface must be polished. To do this, use fine-grained sandpaper.
If you are interested in the question of how to make a modern door out of an old one, you need to know that the best option is toning with colored paint over a white matte finish.

Replacing glass and creating a stained-glass window in the interior canvas

The procedure can be performed in two ways, the choice depends on the design of the web:

Dismantling of special elements (quarters) or glazing beads. At the same time, it is possible to transform the door without disassembling the sash, since this is not provided for in such designs. To remove quarters or glazing beads, you need to pry them off. Then the fasteners will also stretch, often these are nails. Then the old glass is removed, another one is installed in the grooves and fixed in the same way.
You can update old interior doors by dismantling the hidden fasteners connecting the 2 halves of the sash. In this case, external fasteners are not used, but the glass is held between the halves of the sash in the grooves.

Stained glass windows are created in different ways:

sandblasting technology, which is difficult to do at home;
applying a stained glass film, but the effect will be unrealistic;
painting.

Varnishing

This method is only suitable for the case when the canvas is in good condition and does not have significant defects. To update wooden interior doors, alkyd, acrylic, polyurethane and nitro-varnishes are used. They should be applied with a roller, which will allow you to get a uniform layer. The primer is used carefully, because it can slightly change the shade of the tree. The principle of varnishing is similar to painting, but there must be at least 3 layers. After applying each of them, the surface is polished.

Wall mural

The type of finishing material must be selected taking into account the degree of intensity of damage. If cracks and chips are large enough, textured wallpapers are used. A smooth coating will not hide obvious defects. Glue is selected taking into account the type of finishing material. It is better to use the option, which contains antifungal substances. Updating the door is carried out according to the instructions:

A sheet of photo wallpapers is turned face down. Sometimes, to glue the door, it is cut into pieces.
Both wallpaper and canvas are treated with an adhesive composition.
The principle of pasting is the same as in the case of wall covering: the sheet is smoothed from the center to the edges. Excess glue is removed with a sponge.

Restoration Secrets

To be able to ennoble the canvas, you should learn more about the restoration work. Main subtleties:

When choosing a method for eliminating a defect, its length, width, depth are taken into account.
Grout, putty and other compounds leave stains on the surface of the wood. If you want to cover the sash with varnish, shallow chips are removed with a planer.
Restoration of wooden doors is carried out taking into account the interior of the room: the shade of the grout, paint and varnish materials must match the design of the object.

Refreshing old fiberboards

To remove the coating in this case, it is not recommended to use a soldering iron and coarse sandpaper. The method of warming up with an iron wrapped in a cloth has a positive effect. Fiberboard is a demanding material, it does not tolerate aggressive impact. To update the door, you can use the staining method. However, a simple veneer will help make the canvas much more attractive. Panels paste over the door leaf.

Giving new life to plastic

Such a canvas lasts longer without losing its attractiveness, due to its smooth surface, sufficient strength, and ease of maintenance. Available options for updating PVC doors:

staining, and it is recommended to use water-based polyurethane formulations;
wrapping with vinyl film;
the restoration of interior PVC doors is also carried out with the help of veneer: the canvas is covered with panels from all sides, as a result, a product is obtained that, according to its external characteristics, resembles a wooden counterpart.

We remake metal

There are several options, and all of them are universal and can be used to finish the canvas from any material. It is not so easy to damage a metal door, therefore, in most cases, grinding is sufficient, but provided that it is not touched by rust. Available finishes:

pasting with PVC film, self-adhesive is used or the material is attached with varnish;
MDF panels, their fastening to the iron door is carried out by means of self-tapping screws.

Metal shutters are much less often installed indoors. Entrance doors are also finished with leatherette / leather.

Installation of new fittings

On the restored canvas, you should install another handle, hinges, canopies, a locking mechanism, if provided. Metal elements tend to wear out, so old fittings will spoil the appearance of the sash in an apartment with a fresh renovation. The locking mechanism is recommended to be selected taking into account the configuration and size of the existing hole in the door. Drilling other attachment points can lead to a violation of the integrity of the cladding, and work will have to be started all over again.

The nuances of the restoration of the old door with your own hands. Ideas and methods, photos.

A person associates his home with a place of rest. Therefore, he tries to create coziness, choose an interior and a pleasant color scheme in order to fully realize this.

On the other hand, everything in our world tends to become obsolete and collapse. Our homes and their interiors are no exception.

Updating something around us, we awaken creative energies in ourselves, we feel creators.

Although most types of interior work require special in-depth knowledge and skills to perform them, we are quite capable of updating interior doors on our own.

Let's talk about the features and methods of reconstructing old doors in more detail.

How to make a new one from an old door with your own hands: options, photos, tips

photo of an old door before and after restoration using decoupage technique

It is important to prepare it before updating the old door:

remove the doors from the hinges and lay on a flat horizontal surface
fold all accessories separately or prepare for disposal if it has become unusable
if there are glass elements, carefully remove the glazing beads and then remove the breakable parts
if the door has been treated with paint, turn on the building hair dryer and gradually warm up its surface
arm yourself with a piece of coarse sandpaper and remove bubbles of old paint
replace the paper with another one with a finer abrasive and again go over the entire surface of the door
carry out the final grinding with sandpaper with minimal abrasiveness
treat the surface of the door with a special putty for wood products
after complete drying, clean the doors in 3 steps with sandpaper of different abrasiveness
fix the result with drying oil or stain
then carry out those types of work that are necessary to update the appearance of the door
if there were glass elements in it, put them first and then new glazing beads for a fresh color / design

As examples, look at the options for updated doors in the photo.

embodied ideas for decorating and restoring an old interior door, example 1

embodied ideas for decorating and restoring an old interior door, example 2

embodied ideas for decorating and restoring an old interior door, example 3

embodied ideas for decorating and restoring an old interior door, example 4

embodied ideas for decorating and restoring an old interior door, example 5

embodied ideas for decorating and restoring an old interior door, example 6

embodied ideas for decorating and restoring an old interior door, example 7

embodied ideas for decorating and restoring an old interior door, example 8

embodied ideas for decorating and restoring an old interior door, example 9

embodied ideas for decorating and restoring an old interior door, example 10

embodied ideas for decorating and restoring an old interior door, example 11

embodied ideas for decorating and restoring an old interior door, example 12

embodied ideas for decorating and restoring an old interior door, example 13

embodied ideas for decorating and restoring an old interior door, example 14

embodied ideas for decorating and restoring an old interior door, example 15

embodied ideas for decorating and restoring an old interior door, example 16

embodied ideas for decorating and restoring an old interior door, example 17

embodied ideas for decorating and restoring an old interior door, example 18

embodied ideas for decorating and restoring an old interior door, example 19

embodied ideas for decorating and restoring an old interior door, example 20

embodied ideas for decorating and restoring an old interior door, example 21

embodied ideas for decorating and restoring an old interior door, example 22

embodied ideas for decorating and restoring an old interior door, example 23

embodied ideas for decorating and restoring an old interior door, example 24

embodied ideas for decorating and restoring an old interior door, example 25

embodied ideas for decorating and restoring an old interior door, example 26

How and with what you can update the color of old wooden doors: ideas

girl paints an old wooden interior door with white paint

After you have completed the restoration work on the surface of the old interior door, choose a new color for it.

Among the ways that can help you in this moment, we note:

Painting with stain, paint or opening the wooden surface of the door with varnish.
Remember, for best results, brush along the fibers, then all the cracks will be filled with a coloring matter.
Accents on moldings, or painting the protruding parts of the door with contrasting or similar colors. In the absence of such elements, glue them from wooden or polyurethane slats and paint.
Artistic painting, coloring through stencils.
The method is suitable for creative owners who want to bring originality to their interior.
Pasting wallpaper, large drawings on paper, pieces of fabric. Decoupage.
In this case, follow all the requirements for fixing the material on the surface of the door - soak it with water, glue, and process it from above with a jet of hot air.
Stained glass painting on glass.
If you are good at drawing or stock up on interesting stencils, buy special stained glass paints and decorate the glass elements of your old door.
Sticking vinyl stickers.
Note that this method saves you time preparing the old door. In other words, you can not even remove it from the hinges, but immediately glue the vinyl elements.

How and with what can varnished doors be updated?

a man removes the old lacquer coating from the doors for their restoration according to a new design

To carry out restoration work, remove the old varnish from the door in one or more of the following ways:

sandpaper
grinder
chemical solvent

The first method was discussed in the previous section. The second method will significantly speed up the process of removing the old varnish coating. And the third one has one caveat - the varnish can remain selectively on the door leaf. Therefore, be sure to polish the latter.

After removing the old layer of varnish, sanding and drying the doors, decide on their new design, for example:

apply new varnish or laminate,
paint the desired color
paste wallpaper / photo wallpaper or other self-adhesive tape with imitation, for example, under natural wood,
apply freehand painting, copying a specific drawing, or under a stencil,
decorate the door by gluing loose cereals - rice, buckwheat. Be sure to apply a layer of varnish on top to better fix the material.

How and with what can veneer doors be updated?

photo of renovated old veneer doors

One of the most common problems with veneer doors is bulging of the leaf in some areas. Therefore, first prepare it, carry out restoration activities before updating.

To eliminate the problem of swelling of the canvas will help:

Iron.
Heat it on medium and iron the swollen surface of the door, folded on a horizontal stand.
Wet rag.
Moisten a cloth flap with water and spread it on the problematic surface of the door. After a quarter of an hour, remove and wait for drying.
PVA glue.
Draw it into a syringe and gently insert it under the swollen surface of the door. Smooth the area with a dry cloth.

To eliminate cracks and chips on the old door of the material in question, stock up on strips of veneer of a similar color.

Cut out the strips corresponding to the parameters of the repaired surface.
Cut off the excess with a scalpel after applying to the place of the chip / crack. At the same time, keep in mind that the fibers of the patch should be perpendicular to the restored door.
Treat the door leaf with a special putty and wait for it to dry completely.
Use double-sided adhesive tape to secure the veneer pieces.
Sand the joints.

When your old door has only minor scratches and chips, wax them:

liquid
pencil

In the first case, put a couple of drops into the rift and immediately walk with a dry rag to remove excess. Before doing this, be sure to clean the door of dust and dirt, and also grind the surface.

In the second, tear off a piece from the wax pencil, knead it in your palms and stick it on the problem area. Wipe off the mark with a rag. Do this only on a previously cleaned and prepared door.

To update the prepared old veneer door will help you:

If you masked chips and scratches on the door with wax, then remember that varnish and paint will not cover them. Or linger on it for a short time, and then crumble.

How and with what can panel doors be updated?

old panel doors after paint renovation, decor options

Paneled doors in the interior look interesting. However, it is not always convenient to process their frayed surface. We will not go into details. Let's take a look at restoration options.

Successful solutions:

painting in several colors with highlighting protruding places
wallpapering in segments, adhesive tapes along the contour, on panels
decoupage of individual segments
varnishing

The cardinal method is the analysis of door panels and their replacement with laminated hardboard. To do this, you sheathe the door frame with it and carefully select the color when gluing its ends.

If there is glass in the door, decorate it with special paints or imitate a stained glass window. Stencils for decoration are also suitable.

How and with what it is possible to update the doors covered with paint?

man painting old previously painted interior doors

Your first task is to remove the old paint from the doors and prepare them for restoration work. Their sequence:

decide on the location of the door in space - either lay it on horizontal supports, or remove it from the hinges and leave it vertically,
go over the entire surface with a spatula and remove a layer of old paint,
sand with sanding paper
treat with a special primer for wooden surfaces,
let dry and sand again

Seal the areas of the door that you do not plan to paint or varnish.

How and with what can paper doors be updated?

updated paper doors in the interior

Renew paper doors with lightweight materials that will not weigh them down and provoke leaf breaks. For example:

self-adhesive film
decoupage
gluing of individual elements, for example, paintings, three-dimensional drawings
painting with paints
stencils

How and with what you can update an old door frame: ideas, photos

a man measures the level of the door frame in the process of its restoration

The restoration of the door frame should be remembered when you are updating the old door leaf. Of course, fiddling with the first one is less convenient, since it will not work to remove it.

The door frame processing technology is similar to those discussed above for doors. Choose carefully the shades of paint and stain, as well as the color of the self-adhesive tape, wallpaper, so that this area on the wall is in harmony with the updated door leaf.

Below are a number of interesting door frames after restoration with their own hands.

updated door frames to match the interior and doors, example 1

self-adhesive door frame decor elements, example 2

self-adhesive door frame decor elements, example 3

How and how to glue the door beautifully?

beautifully glued interior door after renovation

Among the common ways to decorate an old door is to glue a new coating in whole or in fragments.

For this you will need:

the cloth
leather and its substitutes
photo wallpaper
metal rivets, beads
patchwork
cut fragments of a picture, for example, maps of the world

To stick this or that material, select an effective adhesive, for example, PVA glue, special for wallpaper, adhesive tape, double-sided self-adhesive tape.

How beautiful to wallpaper the door?

the old door after the renovation is pasted over with wallpaper

The main thing is to follow the technology of wallpapering.

First, prepare the door leaf for the update. The technique was presented in the first section of the article.
Decide on the color and texture of the wallpaper.
Apply special wallpaper glue to the surface of the door and attach the paper decor element.
Smooth the result with a dry rag.
Trim the protruding edges with a utility knife.
Wait until the wallpaper on the door is completely dry.

Decorate as you wish:

molding
designer chips, for example, small shells and a cut net, glued on top and covered with paint

In addition to the usual wallpaper, popular:

photo wallpapers with the image of three-dimensional objects / paintings
decoupage
self-adhesive tapes

How to update an outdated metal front door?

old metal front door after renovation

Metal doors also tend to become morally and physically obsolete. Having set out to update them, keep in mind that the approach and methods will be different for the external and internal parts of the front door.

So, the following solutions will update the interior:

drawing with a stencil
art painting
full door mirror
leatherette upholstery
self-adhesive film
laminate

And for the outside of the door are suitable:

MDF panels
laminate

To fix any material on the surface of a metal door, you will need an adhesive liquid, for example, liquid nails when working with a wooden coating.

How to beautifully decorate an old door for a nursery: ideas, photos

do-it-yourself door in the children's room

Children's room is an area of creativity, leisure and intellectual work of the child. Consult with him before you begin to update the door to the nursery.

Better yet, involve the child in the process.

For inspiration, let's add a number of ready-made door decor solutions to the children's room.

options for decorating doors to a nursery after updating them, example 1

options for decorating doors to the nursery after updating them, example 2

options for decorating doors to the nursery after updating them, example 3

options for decorating doors to the nursery after updating them, example 4

options for decorating doors to a nursery after updating them, example 5

options for decorating doors to the nursery after updating them, example 6

options for decorating doors to the nursery after updating them, example 7

options for decorating doors to the nursery after updating them, example 8

options for decorating doors to the nursery after updating them, example 9

options for decorating doors to the nursery after updating them, example 10

options for decorating doors to the nursery after updating them, example 11

options for decorating doors to the nursery after updating them, example 12

options for decorating doors to the nursery after updating them, example 13

How to beautifully decorate an old kitchen door yourself: ideas, photos

renovation of an old kitchen door with mosaics

In order for the door to the kitchen to change after restoration, choose the concept of its decor. It can be:

painting
varnishing
decoupage
gluing wallpaper and any adhesive surfaces
art painting and stencils
stained glass elements
mosaic and gluing loose, small elements

Implemented ideas with updated doors to the kitchen, see below.

embodied ideas for the restoration of an old kitchen door in the interior, option 1

embodied ideas for the restoration of an old kitchen door in the interior, option 2

embodied ideas for the restoration of an old kitchen door in the interior, option 3

embodied ideas for the restoration of an old kitchen door in the interior, option 4

embodied ideas for the restoration of an old kitchen door in the interior, option 5

embodied ideas for the restoration of an old kitchen door in the interior, option 6

embodied ideas for the restoration of an old kitchen door in the interior, option 7

How to beautifully decorate an old bathroom door: ideas, photos

options for updated doors to the bathroom in the interior

The bathroom is a special place in any home. Here we restore beauty and relax after working days. I want the door to it to have its own style.

If you are currently updating it, consider these ideas:

drawing through a stencil
self-adhesive film
imitation of stained glass and paneled elements
combination of colors when staining fragments
mirror interior
photo wallpaper

For more details, see the implemented ideas for decorating the bathroom door in the pictures below.

bathroom door design options after do-it-yourself renovation, example 1

bathroom door design options after do-it-yourself renovation, example 11

bathroom door design options after do-it-yourself renovation, example 12

So, we examined the features of the restoration of the old door in the house on our own. We got ideas from looking at photos of finished ideas. We learned how to properly prepare the surface of the door for renovation.

If you feel the potential, but don't have the courage to take a swing at the big door, start with dollhouse elements. Your child will appreciate creative solutions for decorating doors, and you will have the courage to realize your desires to update them in your home.

Video: how and how to update old interior doors?

03.09.2016 61396

Samples probably still remained in apartments and country houses. Their appearance leaves much to be desired, however, the owner of the dwelling simply may not have the money to replace the old structure with a new one. In this case, you should not refuse to repair, because it is always possible to update old doors. From our article, readers will be able to learn how to update the old one, giving it a beautiful and modern look, and without spending a lot of money.

Preparing the door surface for renovation

To make an old door beautiful is within the power of any person. In this procedure, you need to show only a little patience and work. The first stage of work consists in preliminary preparations for restoration.

So that in the process of repairing an old door structure you do not have to scatter your strength over trifles, think about preparing the surface in advance. To update you will need the following materials:

acrylic paint;
Sandpaper (for sanding a wooden surface);
putty;
Acrylic varnish;
The film is self-adhesive.

So, the new decoration of old doors begins with the preparation of a wooden plane. The main advantage of the work performed is that all actions are done by hand, which means that you do not need to pay for the services of craftsmen who are not cheap. The preparatory stage before starting the restoration of the old door structure is performed sequentially:

Remove it first and place it on a clean and level surface. Immediately try to remove all fittings and glazing beads so that nothing interferes with you during preparation.
Before new ones, remove the old coating first. For these purposes, the thermal method is best suited, which involves heating the painted surface with hot air produced by a building dryer. Under the influence of dry and hot air, the paint on the wooden surface begins to bubble and peel off. Now it can be easily removed with a spatula.

Advice. If the paint is old or applied in several layers, then it is unlikely that it will be possible to remove it at a time. After removing the main paint with a spatula, heat the surface of the door leaf again in those places where the peeling of the paint and varnish composition did not occur. After that, take the spatula again and remove the remaining paint. If the composition is preserved in the recesses and grooves of the door, remove it from there with a triangular-shaped spatula or a sharp corner of a conventional spatula.

The paint is completely cleaned, and now, armed with sandpaper, carefully sand the old wooden door. To make the plane even and more convenient to work with, first fix the sandpaper on a flat rectangular block of wood.
To make the sanding better, use coarse sandpaper at the very beginning, then medium grit material, and finally fine grit paper (for polishing the sanded surface).

It should be remembered that it is impossible to immediately cover the polished and sanded surface of the door leaf with a new layer of paint. The fact is that cracks and small scratches may remain on it, which should first be removed with putty.

It is not difficult to buy putty for wood in a retail network. By the way, you can make it yourself. For this purpose, simply mix small sawdust with PVA glue.
Fill all the bumps on the old door with a ready-made putty composition using a spatula.
After puttying, let the composition dry, and then clean the door leaf with sandpaper in accordance with the scheme described above. As a result, you should get a perfectly flat and smooth surface.
The last stage of the preparatory work is the application of a layer of drying oil. Its shade may be slightly darker than the color of the wood. Drying oil will become a reliable basis for further application of paints and varnishes.

Options for restoring old doors

Having decided to update the appearance of the old door, be prepared to choose the best restoration method. This procedure can be performed in several ways, using various materials for this.

Coloring

You can make a new door out of an old door with the help of staining. This option is used most often, and its essence lies in applying a paint and varnish composition to the door leaf. Usually, a roller or a spray gun is used to do such work with their own hands. The brush is used only for good staining of hard-to-reach places. When choosing a roller, we recommend giving preference to pile models, since foam rubber rollers wear out very quickly.

Veneer finish

Veneering old doors is a longer and more labor-intensive process compared to wallpapering or painting. Finishing work using veneer is carried out in the following sequence:

Prepare the web in accordance with the technology described above;
Now prepare mock-ups of veneer parts using tracing paper or old newspapers for this purpose;
Carefully try on all the elements to be prepared, applying them to the surface of the door;
transfer paper layouts to veneer, and then cut out details from it to decorate old wooden doors;
Try on the veneer elements to the wooden plane, then apply a layer of glue of a small thickness on the surface of the door and the veneer part;
Attach the cut piece to the canvas, aligning the surfaces covered with glue, and press firmly. Perform smoothing of the plane, starting from the middle of the part, moving towards the edges. We recommend using a slightly heated iron for this purpose;
To extend the life of such a decorative coating, coat the veneer on top with wax.

Wallpapering or vinyl

If there are glass elements in the old door, then they can be replaced with plywood inserts, making the entire structure solid and not transparent.

To use wallpaper or vinyl, follow this consistent pattern:

To fix the decor elements, use PVA glue. It is better to prepare the adhesive composition in advance. If you choose wallpaper to finish the old door leaf, then it is better to give preference to washable models. They are easy to care for and less likely to get dirty. Such material will significantly extend the life of the door plane.
Cover the surface of the canvas with a layer of pre-prepared glue, and then press the decorative element against it with force. Only first do a dry fitting of the wallpaper in order to accurately measure part of the material.
When pressing the wallpaper against the surface treated with glue, try to smooth the material well, removing all the air from under it. This approach will eliminate the likelihood of bubbles on the decorative surface.

Features of the restoration of modern doors from hardboard

The repair of doors made of modern hardboard material is done somewhat differently. For this procedure, you will need to purchase a self-adhesive film. The doors themselves are also removed from the hinges, and carefully inspected before starting the restoration. Before filling cracks on them, be sure to degrease the surface. Only after completing this procedure, you can apply varnish or coloring composition to the hardboard canvas.

I would like to pay special attention to the self-adhesive film. It comes in different qualities, with varying degrees of transparency. Naturally, the more expensive material will be better.

Cut the purchased film according to the dimensions of the door leaf, and then carefully stick the material around the entire perimeter of the restored door structure. It is recommended to smooth the already glued material with a towel to prevent the appearance of bubbles and ensure uniform fixing of it on the entire surface. Smooth the self-adhesive film in the direction from the middle to the edges. If it so happens that bubbles still appear on the surface of the glued film, they can be easily removed with a needle. The door leaf covered with such a film material will have an impeccable and beautiful appearance. After fixing it, the door can be installed and the fittings can be fixed on it.

Now you know that a new door leaf can be made from old ones. This will make it possible to modernize the interior of the house, but also save on repairs, purchase and installation of a new door.

All photos from the article

The door, perhaps, can be attributed to the class of centenarians - their age is often calculated in tens of years. And they all do not lose their efficiency, continuing to protect the personal space of their owners. Over time, their presentability fades, but, armed with simple tools and materials, the doors can be upgraded beyond recognition in the good sense of the word.

If you want change

Why one day comes the thought that the door annoys you? I mean, not herself, but the way she looks. At first I want to put a new one, but it will be a standard product, because the price of a wooden exclusive is high. Ordering a new non-format from scratch can be a very difficult task.

Under numerous layers of paint, cracked varnish or unsightly leatherette, high-quality wood is hidden. Having freed from the hateful "fetters", you can transform the product in such a way that it will become the subject of delight for your household and guests.

There are a lot of upgrade options:

overhead facades;

varnishing;
brushing;
painting;
pasting with leather, veneer, wallpaper, photographs, fabric;
applications from shells, cereals, beads, rivets;

plot or stencil images;
stained glass;
decoupage;

curtains;
inscriptions in three-dimensional letters, curly plywood details;
artificial moldings;

forged contour figures.

Get to the bottom of it

The nature of subsequent work will depend on the decision how to update old wooden doors with your own hands.

The initial stage of the reconstruction will be the cleaning of the door leaf from the old coating will require the following tools:

wash or building hair dryer;

grinding skins coarse and fine-grained;
grinder;
spatulas;
special putty;
brushes;
rags;
roller

From the necessary materials you will need:

drying oil;
putty,;
stain;

Down with the vestiges

Having removed the perennial layers, and having processed the door leaf with special means, you can be sure that the new decorative coating will hold well.

Before updating wooden interior doors, you need to:

remove from hinges;
remove the fittings (if you wish, it will be inexpensive to replace it with a new one);

put the door firmly on a horizontal surface;

if there is glass, take it out;
heating the paint with a hairdryer, immediately remove the softened layer with a spatula, the varnish is removed with a rag;

Note!
The hair dryer heats the paint up to 400–600 °, so run it without stopping in one place - the paint will start to burn, a poisonous smell will appear, and the tree may burn.
The instruction prescribes to ventilate the room and take small pauses every 15 minutes.

painted or lacquered surfaces can be treated with a remover;
work faster. Control the pressure so that no furrows remain;

sand with coarse sandpaper to remove the last paint;

Note!
You need to work with a spatula and emery along the fibers so that the wood does not ruffle.

clean the surface of dust, wipe the door with a damp cloth so that small villi rise, and sand with a fine-grained sandpaper;
fill gaps and crevices;

Note!
Special wax will help to hide minor defects, and it is easier to work with it.

sand and sand;
open with stain / drying oil to protect against moisture;

return the glass to its place and it is advisable to replace the glazing beads well, they cost a penny.

Note!
It is desirable to process the platbands in the same way, then the whole structure will look harmonious.

And I like it that way

A cleaned and processed door can be left in its original form, since updating old wooden doors with your own hands does not always mean decorating it. Look, your door already looks 100% new, and a change in fittings will ennoble it even more.

It will be enough to open the surface with a colorless varnish, wax or shade with a translucent color. The paint is applied with a brush along the fibers to avoid smudges, or from a spray gun. Such a "renewal" will wonderfully fit into the classic style of your apartment.

Note!
When working with a sprayer, cover the adjacent space with paper, it is better to insert the glass later.
Work with a brush begins with panels, then embossed ledges, a canvas follow.

Like in the village

A brushed - artificially aged door will successfully fit into the style of Provence, country or eclecticism. The procedure is carried out with a metal brush or special substances, deepening the soft fibers of the tree. After grinding and polishing, the door will acquire its history, captured in the tread pattern.

A door will look in place, with combined fabric-based bamboo wallpaper glued.

Perfect fabric, the edges of which should not crumble. In this case, they are carefully tucked.

You can stick veneer, as it is not difficult to update wooden interior doors with a smooth surface with this material:

apply glue for heavy wallpaper on the veneer;
attach a fragment to the door;
iron from the middle to the edges with an iron heated to 50 °.

Interroom doors play an important role in an apartment or a private house - they serve to divide the living space and ensure silence in specific rooms. However, doors are one of the components of the entire interior, and the overall perception of the living space depends on their appearance. Wooden canvases are often installed, because natural wood has good soundproofing characteristics and is distinguished by aesthetic appeal.

But even the highest quality doors made of expensive wood species lose their original appearance over the years. Such products inevitably undergo deformation, scratches and cracks appear on the surface from intensive use. That is why many decide to replace interior doors. But why spend a lot of money when an old wooden door can be updated at minimal cost without professional tools. Let's look at the main ways to do this.

Restoration - cost savings or a necessary measure?

Of course, the easiest way is to replace the old door structures with new ones. But restoration, and even done by yourself, will cost you many times cheaper. To date, there are many methods that will allow you to update the door block for mere pennies. As a result, you will get a product no worse than a purchased analogue, and with an original approach - an exclusive door that will become a highlight of the interior.

When do you need to restore interior doors? Such a measure will be the best way out under the following conditions:

When homeowners decide to completely change the style of interior design. It is not necessary to buy new doors with a more suitable design if the old ones are still in excellent condition. It is enough just to modify them a little.

If the interior doors were made by hand many years ago and have a unique finish, carving or other decor. In this case, the old canvases are real antique exhibits, and their replacement is impractical.

Restoration is especially necessary when the canvas and box are of non-standard dimensions. Agree, it is easier to restore an old door than to order a new one.

Doors are best repaired and updated if a complete replacement of the block threatens the integrity of the opening or can ruin the newly made wall cladding.

Even under the most optimal conditions, when nothing interferes with the installation of a new door, restoring old canvases is very exciting. You can show all your creativity.

Any door structures made of wood are subject to restoration. Even canvases with glass inserts can be turned into a real masterpiece if you have artistic skills. The only exception is old doors that have become unusable (when their integrity is broken or the box has been deformed). It is also undesirable to subject products made of cheap materials (MDF, fiberboard) to restoration renewal.

How to prepare the door leaf?

Interior doors made of wood, which can be seen in almost every home, are mostly covered with paint or varnish. If they have lost their attractive appearance, this does not mean that the wood is in poor condition under a layer of such a finish. Therefore, before deciding to restore a wooden door, you need to free it from everything superfluous, including old paint or varnish.

Important! Before proceeding with the restoration of the door leaf, it is necessary to remove the product from the hinges - this will make it more convenient for you to work. Do not forget to remove all fittings (hinges, handle, lock).

On the video: removing old paint from a tree (example with a hot air gun).

The next step in the preparation and restoration of the canvas will be the elimination of visible defects, such as chips, cracks and scratches. They can be sealed with special means for this. So, wood putty is more suitable for puttying serious damage and leveling the surface, it is good to fill small gaps with furniture wax, and it is easy to mask minor scratches with a retouching pencil.

You can also prepare homemade putty, which will turn out to be no worse than purchased. To prepare it, it is enough to mix wood dust and clear varnish in equal parts.

After drying, the places covered with putty or putty must be sanded to achieve a smooth surface. To do this, use a grinder or fine-grained sandpaper. Clean the prepared door from the remnants of wood dust, treat with drying oil or stain if you want to give the desired color.

Possible ways to update old doors

When the preparatory stage is completed, you can proceed to the most interesting - restoration and decoration. It remains only to decide how to update the old interior doors. The choice of a new cladding option depends on your skills, the availability of certain tools, materials and fixtures.

Updating interior doors at home is easiest in the following ways:

painting or varnishing;
wallpapering, photo wallpaper;
decorating with vinyl stickers;
using self-adhesive film;
painting using stencils;
renovation with overlay facades.

These methods are the simplest and most inexpensive, they have found their application in modern restoration work. And the materials that are used for this can be purchased at any hardware and art stores.

Painting or varnishing

To restore the experienced look of an interior door at home, the first thing that comes to mind is painting. Wooden canvases are coated with different compositions: it can be enamel, transparent or tinted varnish, stain, decorative coatings with protective properties. To give the door a rich color and obtain a durable coating, you can use acrylic, alkyd enamels and nitro paint.

It is best to choose acrylic paint. Alkyd composition and nitro paint will cost less, but their main drawback is a pungent odor and harmful fumes.

To apply enamel, you can use both brushes and rollers. In the first case, the tool will have to be combed out to get rid of loose bristles, and then kept in warm water. The second option does not require any preparation.

home > ISO classifier