Equipped with a special built-in mechanism that allows you to turn each of them into a bed in a matter of seconds. The choice of this mechanism depends on the area of ​​​​the room, the frequency of use, as well as on various additional advantages (ease of layout, the presence of drawers for linen, etc.). All models can be conditionally divided according to the type of mechanism into rolling out, unfolding and unfolding. Let's take a closer look at each of them.

Sofas with folding mechanism

This is a widespread and one of the oldest mechanisms. His bed is formed thanks to the back and seat. They are stacked horizontally when transformed, forming a double bed. The most popular types are "click-clack", "eurobook", "book".

"Book"

This is a very simple layout. It is necessary to raise the seat until it clicks, then lower it, after which the back takes a horizontal position. These types of folding sofas are designed for daily use. They create a high bed, and also suggest drawers designed for bed linen. These sofas are not the most reliable, as they wear out quickly enough. To expand the "book", you will need additional space. If it is located against a wall, then it will need to be moved away. Therefore, when it is best to immediately leave a distance behind the back of the sofa, so that later, when laying out, it does not have to be “carried” around the room.

"Click Clack"

Views with the "click-clack" transformation method have the same mechanism as the "book". At the same time, there is an intermediate position of the back, which allows you to remain in the “reclining-semi-sitting” position. This gives an additional advantage and makes this piece of furniture for relaxation even more comfortable. To move to the relax position, you need to raise the seat to the 1st click. Raising it to the 2nd click, you can expand the sofa completely.

"Eurobook"

Such types of folding sofas require practically no effort during the transformation. The seat is pulled forward, while the backrest fits into the free space. They are convenient, when laying out they do not require a lot of space (they can stand against the wall). Compared with the same "book" they form a wider, even bed. They also have drawers for laundry. A feature of such sofas is that they do not have such a mechanism as the "book". Thanks to this, they practically do not break. Their only drawback is that with everyday use, the seat rollers can spoil the floor surface.

Sofas with unfolding mechanism

This is quite popular, although not the most popular. Such types of sofas suggest that the bed remains inside under the seat when folded, and when transformed, it first moves forward, and then unfolds to form a bed. The most common type is a folding bed, as well as its varieties: "sedaflex", French folding bed.

French cot

This is a triple folding mechanism located under the seat cushions. Before unfolding it, it is necessary to remove the pillows, then pull out the lower part by the handle, and then gradually unfold it. His bed is a frame, which consists of three sections connected by hinges, and a mattress. These types of sofa mechanisms are widely used in models that differ in design and price. They are very small and do not affect the appearance in any way. It does not assume the daily use of furniture. Such a sofa is more suitable for guests (exceeding the permissible load and frequent use will lead to sagging of the mattress). In addition, these models do not have a place to store linen.

"Sedaflex"

Similar types of transformation of sofas resemble a French folding bed. Although they are more expensive and durable. During the layout, you need to slightly raise the mechanism, and then pull it towards you with force. This is one of the most reliable models, it is able to withstand heavy loads without changing the frame. Such designs allow you to form a rather high and wide berth, while the folded sofas are very compact. The only disadvantage of such models is the lack of storage space for linen.

Types of sofas with roll-out mechanism

This type of mechanism is becoming increasingly popular due to ease of use, high strength and spaciousness of the bed. It is very convenient to lay out such a sofa, since the berth is pulled simply forward. But when acquiring such a model, you must carefully consider all the components of the mechanism. For example, experts say that a good sofa should have closer springs, then it will last a very long time. Models with a roll-out mechanism have one characteristic drawback - a low berth that can push through and scratch the floor during transformation. Common models: "dolphin" ("kangaroo"), "accordion".

"Accordion"

Similar types of transformation of sofas are based on the “accordion” principle: in this case, the seat rises to a slight click, and the double back folded into a house stretches like an accordion, thereby forming a flat bed with a seat. Such models are very easy and quick to unfold, have covers for each of the elements and drawers for linen.

"Dolphin" ("kangaroo")

This is a mechanism that is installed more often than others in various types of corner sofas. When laying out, a platform rolls out from under the seat, which then rises, forming a flat bed with a seat. These types of sofas are very durable, they can withstand high loads, so they are considered one of the most durable. But such models cannot be called compact.

Design features

It should be noted that the shape distinguishes island, straight and corner sofas. The latter are installed in the corners of the room. They are great for small rooms. This is one of the most modern and fashionable types of upholstered furniture. As soon as the sofa is in the room, it immediately becomes much more comfortable.

One of the advantages is the ability to vary the design and shape as desired. I must say that everyone, having considered the types of corner sofas, will be able to choose the one that suits him. The sides of such models can be the same or different in length.

Island sofas are most often sold in a rounded shape, and therefore, they cannot be placed in a corner and leaned against a wall. They should occupy a central place in spacious rooms.

Appointment of sofas

Such upholstered furniture for its intended purpose is conditionally classified into the following models:

At the same time, the mechanisms and types of models may differ, therefore, it is necessary to choose a specific thing that is directly suitable for your purposes. Often it is the types of sofa upholstery that determine their purpose. For example, models sheathed in leather are designed for kitchens or offices. For children's rooms, sofas are covered with bright and practical fabrics, from which it is easy to remove stains.

Types of sofas by size

All models are divided into compact and large designs. However, there is no single standard. One manufacturer makes a two-seat sofa 1.6 m long, and the other - 1.9 m.

It is necessary that the model that you like does not occupy all the free space in the room, does not block the balcony door. Before buying, measure the area of ​​\u200b\u200byour room and compare it with the dimensions of the sofa.

We hope the tips in this article will help you make the right choice, and your sofa will serve you faithfully for many years. Good luck with your purchase!

Choosing among the many types of transformation of sofas, you need to consider whether you will lay out a bed every day, or only occasionally, when guests rush into the house.

Book ("click-clack")

Mechanism: to expand the sofa, lift the seat and pull it towards you. It is reliable, time-tested.

• Three positions of the backrest: sitting, lying, "relax" (intermediate position with a half-reclined back).
• Compactness. Doesn't take a lot of space to spread out.
• As a rule, it is possible to provide a linen box.
• The sleeping place is flat, without "kinks".

Eurobook

Mechanism: The seat is pushed forward, after which the back of the sofa is lowered. In fact, it is difficult to call similar mechanisms: the seat leaves by sliding along the guides, the backrest is lowered in manual mode.

• Durability: Simplicity sofa folding mechanism eliminates breakage.
• Large selection of sizes.
• Large linen box due to the lack of internal parts of the mechanism.
• Flat sleeping surface.

Eurobook "Tick-Tock"

Mechanism: among others types of transformation of sofas this one is especially respectful of the flooring: the wheels do not move on the floor, the seat moves along a trajectory resembling a semicircle.

• Scratches on parquet, linoleum and other floor coverings are excluded.
• Doesn't require a lot of layout space.

Accordion

Mechanism: this “musical” name was given for its resemblance to the principle of stretching the bellows of this musical instrument. The seat raises until it clicks, and then extends to the stop.

• Minimum assembled size.
• Large bed size.
• mechanism reliability.

Withdrawable

Mechanism: The seat pulls all other parts along with it. To unfold the sofa, you need to pull the seat strap hidden at the bottom.

• Of all sofa folding mechanisms this one is the most reliable.
• Takes up little space when folded
• Large size bed with a small size of the folded structure.

Cot

Includes the following types of sofa transformation: American and French. They have some differences, but are similar in that the assembled bed is under the seat.

french look

Mechanism: the seat must be pulled out towards you and then up, after that the folded sofa should be “unfolded”. Before that, you need to remove the pillows.

• When folded, it takes up little space.
• When unfolded, it has a fairly large bed.

American view ("sedaflex")

Mechanism: unfolds similarly to the French mechanism, while the headrest does not need to be removed, it will automatically move to the desired position.

• More durable mechanism than the French counterpart.
• There is no need to dismantle structural elements.

Dolphin

Mechanism: the movement of the sleeper at a given sofa folding mechanism reminiscent of a dolphin dive. It is necessary to pull the strap attached to the seat and pull it out completely.

• The most durable of all types of transformation of sofas. Suitable for daily unfolding.
• The sleeping place is large, flat.
• Easy to unfold and fold.

Conrad

Of all types of transformation of sofas this option is the most convenient for sleeping, as it allows the use of spring blocks in the design, which is most beneficial for health and creates comfortable conditions for sleeping.

Mechanism: the part located under the seat extends and stretches further, dragging the seat with it, and then part of the back, after which the first part rises up, on the same level with the seat, and the part of the back falls to the same level.

• A sleeping place close in quality to an orthopedic mattress.
• Significant space saving when folded with a relatively large bed.

The sofa has become an integral and absolutely necessary part of our home life. But, if it will be used as a sleeping place, its choice becomes an even more serious task. Choosing the right sofa bed for any of the rooms of an apartment or house is very important. After all, you have to deal with him every evening and morning.

In this article we will talk about choosing a sofa folding mechanism and which layout mechanism to prefer. We will tell and show how sofas are laid out.

How to evaluate the mechanism for turning a sofa into a bed

There are four criteria for this:

1. how the bed is located relative to the back - perpendicular or parallel;
2. whether the mechanism is so reliable that it can withstand daily use, or is it only suitable as a guest sofa;
3. how convenient is it to lay out the sofa;
4. is it possible to quickly fix the mechanism if it breaks.

It should be noted that with the location of the bed parallel to the backrest, it will always be narrower than that of a sofa that unfolds forward (perpendicularly). Indeed, with an increase in the width of his bed, the depth of the seat and the height of the back of the sofa increase accordingly, and it becomes uncomfortable to sit on a folded sofa. While the width of the perpendicular berth is equal to the width of the sofa.

Eurobook

Eurobook is one of the most popular sofa folding mechanisms.

When unfolded, the bed is located parallel to the back.
To expand the sofa, the eurobook seat stretches forward.
The back rests flat and rests on the seat.

Characteristics:

• the bed is stable and comfortable;
• the eurobook sofa usually has a box for linen;
• The Eurobook sofa mechanism is reliable, can withstand loads up to 240 kg. But, if it still breaks, then it is not repaired;
• it folds out easily and quickly, but this requires the sofa to stand a short distance from the wall or it will have to be moved back and forward again daily (will this cover your floor?).

Accordion

Accordion sofas are valued for their high compactness, reliability and comfortable sleeping place.

To unfold the "accordion" sofa, its seat must be pulled out by a special strap, and the back folded in half unfolds like an accordion.
To fold the accordion sofa, the front part must be raised until the mechanism is activated, and then lowered by pressing on the edge to fold the back, and slide in.

Characteristics:

• high and wide berth with a box for linen;
• the sofa mechanism "accordion" is easy to use and reliable;
• sofa "accordion" is inconvenient for laying out on carpets with a long pile;
• breakdowns are easily eliminated, but the mechanism requires periodic lubrication;
• at loads over 180 kg daily transformation is not recommended.

Dolphin

A popular and widely used sofa folding mechanism, especially in corner models.

The deployment is parallel.
The lower section of the "dolphin" sofa is pulled out and put forward for a special loop.
The section rises up and becomes part of the bed.

Characteristics:

• sleep comfortably;
• corner models are equipped with linen drawers;
• daily transformation is possible, but on carpets with long pile it is difficult;
• the mechanism of the sofa "dolphin" is reliable, easy to manage, quickly changes in case of breakage;
• withstands a load of up to two hundred kilograms, but the stationary and retractable parts after some time can sag to varying degrees.

click-clack

Click-clack sofas are the most comfortable for relaxing due to the presence of a relax position of the back or armrests.

The deployment is parallel.
When unfolding, the sofa is tilted onto the back and moved forward. The seat is lowered horizontally.
The back of the "click-clack" sofa can be fixed in the third position (except for lying and sitting) - half-sitting.
There are also single models of click-clack sofas, in which only the sides fall.

Characteristics:

• a narrow place to sleep without a back;
• in the unfolded state, most often there is no support for the pillow and head, since the sidewalls in most models are also lowered;
• there is a linen box;
• to expand the sofa, you need to move it away from the wall;
• click-clack sofas are inexpensive;
• the click-clack mechanism is reliable for daily transformation, it is easy to replace if necessary;
• if there are no retractable legs and the sofa is laid out, then it is not recommended to sit on the edge.

Cot

Sofas with a folding mechanism - a choice for a living room with a bed "just in case".

The spread is perpendicular.
There are several types of such mechanisms with slight differences. The most common French and American models.
The clamshell sections unfold sequentially. Each of them is mounted on metal legs.
The strongest are American folding beds. But in any case, they are not suitable for daily transformation. This is a guest sofa.

Characteristics:

• compact when folded;
• have a box for linen;
• the sleeping surface is not very flat;
• daily transformation is contraindicated, frequent use leads to loosening and sagging;
• the folding mechanism of the sofa is simple and easy to repair.

Details Category: All about sofas Views: 163607

Mechanisms for transforming sofas - briefly about each

First, let's define what a sofa transformation mechanism is. Another name is often used - the sofa folding mechanism. Professionals prefer the concept of transformation, so I will use it further.

Under these names lies an element that transforms the sofa into various shapes and positions. For example, a sofa from a sitting position turns into a sofa bed or into a sofa for "relaxation" with a partially reclined back. Another example of transformation is changing the shape of a sofa. For example, a corner sofa can be turned into a straight sofa or vice versa.

Why is it important to choose the right sofa transformation mechanism?

• The mechanism is one of the main ones, therefore the overall service life of the transformer sofa also depends on its reliability.
• The mechanism affects the convenience and ease of converting the sofa into various positions.
• Depending on the transformation mechanism, different free spaces in the room will be required to bring the sofa into the desired positions.
• Depends on the type of transformation mechanism and . After all, it is under it that the mechanism is hidden from our eyes.

Sofas without transformation mechanisms

Such sofas, by definition, do not contain transformational elements and are not able to unfold. Sofas without mechanisms are used to create seating for two or more people. You can offer this option for a small size. Less often they can be found as a sofa for sleeping. Although for people without excess weight, the use of a sofa in this capacity is quite acceptable.

Non-folding sofas can be used as separate sofa modules. By applying several similar modules, especially of different sizes, you can change the shape of a sofa made up of modules.

Monolithic sofa suitable for hallway, for the living room and decorate the kitchen or dining room. Often this type of sofa can be found in public places.

Pros: there is no mechanism, which means there is nothing to break. The service life of monolithic sofas is longer than the service life of folding sofas.

Minuses: no mechanism, no possibility of transforming the sofa. Monolithic sofas are not suitable for organizing sleeping places, especially if you need to put two or more people.

The mechanism of transformation of the sofa "Book"

Sofa "Book" is laid out in two positions: a sitting sofa and a sofa for sleeping.

The sofa is converted into a sleeping position by tilting the back of the sofa back.

During unfolding, you will not have to move the sofa away from the wall, but keep in mind that the design of the sofa requires free space between the wall and the back of the sofa.

The folding parts of the sofa are wooden or metal frames with spring blocks attached to them. In addition to the spring blocks, another filler can be used - foam rubber or latex. A sofa with a spring block is preferable, as it has the best performance in terms of service life and comfort.

Sofa "Book" often contains a section for bedding inside

Advantages: durable, reliable, time-tested mechanism. Suitable for frequent use and organizing a bed.

disadvantages: the sofa can only be unfolded in two positions - sitting and lying down. During transformation, in the part where the folding parts of the sofa are connected, a bulge or indentation may appear, which will negatively affect the comfort of sleep. The “book” cannot be placed tightly against the wall, since the unfolding mechanism requires free space between the wall and the back.

The mechanism of transformation of the sofa "Tango"

When preparing this article, I came across the fact that manufacturers invent their own names for mechanisms of the same type in terms of properties. Because of this, confusion occurs. So is the case with the Tango mechanism.

The click-clack (clack) mechanism has similar properties. In fact, both mechanisms are similar to the "Books" already described above.

The main difference from the "Book" consists in the possibility of "Tango" ("Click-clack (clack)") to take intermediate positions of the back of the sofa when unfolding.

The backrest, in addition to full horizontal unfolding, can be in a reclining, half-sitting position. This feature creates additional convenience for relaxation.

Sofas "Tango" have a section for storing the bed

Advantages: the mechanism allows you to fix the back of the sofa in several positions, sofas "Tango" are small in size, when unfolded into a plane, the sofa creates a surface without bumps and bumps.

Disadvantages: there is no way to put the sofa tightly against the wall; when transforming the back, you need a place for unfolding.

The mechanism of transformation of the sofa "Eurobook"

The work of the mechanism: the sofa seat is pushed forward on roll-out rollers, a niche is formed in shape and size identical to the back cushions of the sofa. Pillows fit into a niche, resulting in a flat surface of the bed.

Advantages: ease of converting the sofa into a bed, the simplicity of the mechanism itself - read its high reliability, large and even place to sleep, large niches inside the sofa for storage and bed.
disadvantages because of the wide seats, it is not convenient to sit on the sofa leaning against its back, especially for people with short stature.

Sofa transformation mechanism "Pantograph" ("Tick-tock", "Puma", "Walking Eurobook")

With the "Pantograph" the same story as with the "Tango" sofas. Apparently, for the sake of a red word, sellers and manufacturers have come up with a number of bright names for essentially the same mechanism. So, what else did I manage to meet under the mask of "Pantograph" - "Tick-tock", "Puma" and even "Walking Eurobook". In order not to get confused, I will continue to call the mechanism "Pantograph" (sounds somehow solid and mysterious))) .

"Pantograph" originated as a variant of the "Eurobook" mechanism. The difference is that there are no roll-out rollers in the "pantograph". Otherwise, it has parameters similar to the "Eurobook". Equipped with internal storage niches, it has a large and even bed.

The principle of operation of the mechanism: For unfolding, it is enough to pull up the sofa seat by holding its edge in the middle. Often sofas are equipped with loops - handles for easy unfolding. By pulling up the seat of the sofa, you activate its mechanism, which pushes the seat up and forward and at the same time opens the legs of the support and stands on them. The pillow back is placed in the formed niche. The result is a flat, without visible joints, a place for two people to sleep.

Advantages: sofas with "Pantograph" have a comfortable place to sleep. The mechanism is easily laid out. Such a sofa will not spoil your flooring, because when unfolding, parts of the sofa do not ride on the floor.

disadvantages: the mechanism is expensive because of this, and the cost of the sofa becomes higher. Due to the wide seat, sitting on the sofa is not comfortable, you need to use additional pillows

The mechanism of transformation of the sofa "French folding bed"

The principle of the mechanism: The sleeping surface of the sofa consists of three sections. You need to pull the edge of the seat and stretch them forward. Sections will open and stand on legs - supports. When folding, the sections hide inside the sofa body.

Sofas of this series are not suitable for frequent use because the mechanism is rather weak to wear.

These sofas do not have a place to store the bed - the entire interior space of the sofa is occupied by a folded bed.

When assembled, the "French folding bed" is small in size, but unfolding will require free space (at least 1.50 meters) in front of the front of the sofa

Advantages: in the assembled state it has small dimensions.

Disadvantages: uncomfortable sleeping surface, no bed storage, short service life (about five years)

Output: you can use the "French folding bed" to organize seating and for rare use as a bed - the option of unexpected guests lingering and staying (they won't sleep on such a sofa for a long time and will soon run away))).

Sofa transformation mechanism American folding bed (Sedaflex, Sedaflex)

The principle of the mechanism: The place to sleep has three parts-sections. You need to pull the seat of the sofa, as a result of which the sections of the bed will open and stand on the supports. Unfolding goes in two stages - first one section will open, and then the next one.

In fact, this mechanism is identical to the "French Clamshell" mechanism.

Reliability is its main difference..

The frame of the sofa and the mechanism itself are made of wear-resistant materials. This makes it possible to regularly use "Sedaflex" as a transformable sleeping bed.

Advantages: easy to operate, has good performance of reliability and durability.

Disadvantages: there is no place for linen, the surface of the bed has seams.

The mechanism of transformation of the sofa "Italian folding bed

This transformation mechanism belongs to the double folding mechanisms as well as the American clamshell. The double folding mechanism is a mechanism that is brought into working position in two stages.

The principle of operation of the mechanism

To unfold the Italian folding bed from the sofa to the bed, you need to pull the upper part of the back of the sofa towards you (usually the back has a special loop for this purpose).

• At the first step of unfolding the back of the sofa, together with the pillows, leans forward and then lies down and rests on the seat of the sofa.
• At the second stage the inner part of the sofa design makes a turn around its axis, this is reminiscent of unwinding a mattress rolled into a roll. After this turn, the support legs open, which were hidden before, were hidden and folded inside the structure and the formed sleeping place of the sofa rests on them.

Due to the reinforced springs, the mechanism can be folded and unfolded without significant effort.

Advantages of the Italian folding bed: this mechanism is the most reliable and durable of folding beds, it became possible due to the use of reinforced metal pipes in the frame of the mechanism, the sofa in the folded state has a compact size, when unfolding there is no need to remove the pillows from the seat of the sofa, Italian folding beds among other folding beds have the thickest and most comfortable a mattress for sleeping, in addition, lamellas and belts are used in the frame, which create an orthopedic effect.

disadvantages lack of storage space for linen, high price

The mechanism of transformation of the sofa "Accordion"

The principle of operation of the mechanism: "Accordion" got its name for its similarity to the principle of operation of accordion bellows (stretch back and forth). The sleeping space of the sofa also stretches forward, as it were, while bringing the sofa to the sleeping position, and rests on the extended supports. After the transformation, we have an even, although with minor seams a spacious place to relax and sleep.

The convenience of the "Accordion" sofa in its compact size when folded. But we must not forget that to unfold the sofa, you need free space in front of its front part (you need at least 1.50 meters)

Models "Accordion" are often equipped with an additional cabinet for storing bedding. Such a cabinet is located near the back of the sofa.

There is no storage space inside the sofa itself, the space is occupied by a folded sofa.

Advantages: Reliable and load-resistant mechanism that increases the life of the sofa. Supplied with additional cabinets for storage. Ease of bringing the sofa to the sleeping position.

Disadvantages: the sofa, when brought into the sleeping position, rides on the floor, so it can damage the flooring.

The mechanism of transformation of the sofa "Spartacus"

The principle of the mechanism: Triple folding mechanism. It is necessary to pull the seat of the sofa and it will decompose in three steps while standing on extended legs.

The design of the mechanism was developed by Italian engineers. This mechanism belongs to the metal-frame mechanism. The frame is made of shaped pipes on which a dense mesh made of metal rods 4 mm thick is mounted. The frame consists of three sections. The mesh creates a good orthopedic effect. On top of the mesh is a polyurethane foam mattress. It is comfortable to sleep on such sofas. The design of the mechanism provides a large bed in length, which is especially important for tall people. The mechanism is very reliable because it does not contain wooden and plastic parts.

Advantages: reliability and durability, easy to unfold, can be used daily, flat and large bed
Disadvantages: there is no place to store bedding, since the mechanism occupies the entire interior space of the sofa when assembled, you need to remove the sofa cushions before unfolding.

Sofa with unfolding on the floor

The principle of operation of the mechanism The sleeping place consists of two sections. When folded, the sections are hidden inside the sofa body. To unfold the sofa, you need to pull up on the inner edge of the sofa seat. Then, pull the sections forward towards you. The berth has no supports and unfolds directly on the floor.

It cannot be said that the sofa is comfortable for sleeping, since the joints of the sections are noticeable and the bed itself is located very low. Therefore, such models can be used for occasional use as a bedroom. But for sitting it is quite an acceptable option.

Advantages: compact dimensions in the assembled state, the cheapest type of folding sofas.
disadvantages: not comfortable to sleep, no storage space for bedding

The principle of the mechanism: The sleeping place consists of two segments. In the assembled state, the segments are in the sofa body. To unfold the sofa, you need to pull the bottom of the front. After that, it will roll forward into the working position. All that remains is to fold the pillow into the vacant seat. As a result of the transformation, a comfortable place to sleep is formed.

Roll-out sofas are durable and reliable models. Well suited for frequent use. Contain internal space for storage of bed linen.

Advantages: the most reliable, have a comfortable place to sleep and compact dimensions when assembled.

disadvantages: roll-out sofa rollers can ruin the flooring when unfolding, the bed has a low height

The folding mechanism of the sofa "Konrad" ("Telescope")

The principle of operation of the mechanism: "Konrad" consists of three sections. To unfold the sofa, you need to pull the lower part of the sofa from the front. In this case, the sections roll out one after the other. Because of this feature, the mechanism was nicknamed the "Telescope". Sections roll out and stand on supports.

"Conrad" is a subspecies of a roll-out sofa. The main difference is the large height of the bed.

Advantages: reliable mechanism suitable for daily use, sofas have a compact volume, equipped with a box for linen, comfortable for sleeping

Disadvantages: mechanism and sofa are heavy

The mechanism of transformation of the sofa "Dolphin"

The principle of the mechanism: To unfold the sofa, pull the front of the sofa from below. As a result of this, a section hidden inside the sofa body will roll out onto you. Inside the roll-out section there is a pillow with a strap. You need to grab the strap to pull the pillow up. She will "emerge" and stand on the same level with the cushion-seat of the sofa. Voila, the sleeping place is ready.

The Dolphin mechanism is mainly used in the construction of corner sofas. Places for storing the bed are not located in the roll-out part of the corner sofa. The mechanism exerts a significant load on the body of the sofa, so when buying, pay attention to the material of the body. Knots are not allowed if wood is used.

Advantages: ease of unfolding, the optimal height of the bed.

disadvantages: not durable.

The mechanism of transformation of the sofa "Elf"

The principle of the mechanism: The mechanism unfolds easily. Armrests are bred on the sides and a berth is formed.

"Elf" refers to metal-frame mechanisms. The frame is made of metal profiled pipes. Wooden slats. Armrests are adjustable in height and have several positions. This feature allows you to create the most comfortable position of the armrests for the reclining position.

Advantages: compact model of sofas, a good flat bed, slats give a good orthopedic effect, adjustable armrests, you can create a sofa for yourself.

Disadvantages: you can not put the sofa close to the wall, the bed is in the same place as the seat.

Sofa transformation mechanism "Recliner"

"Recliner" got its name from the English word recline - reclining or leaning back

The principle of the mechanism: The sofa transformation is controlled by complex mechanisms hidden in the sofa body. With their help, you can adjust the inclination of the back of the sofa and extend the footrest to a predetermined distance and at a certain angle.

Some models have vibration massagers built into the sofa cushions. Particularly advanced sofas have built-in electric motors that control the transformation of the sofa using a remote control.

There are models with "memory" that can adjust and remember the settings of the mechanism made directly for your body.

Advantages: very easy to manage, have fine settings - you can create a sofa for yourself.

Disadvantages: high price, used only as a place to relax, as there is no place to sleep

General conclusions

• Pay close attention to the mechanism when buying a sofa. The ease of use and life of the sofa will depend on choosing the right mechanism.
• Match your needs with its capabilities. How often will you lay out the sofa, what space do you have allocated for installing the sofa, especially when unfolded.
• Do not take a sofa with a obviously inappropriate mechanism just because the color is cool or because the neighbors have one. Choose individually for your needs.

Sofa transformation mechanisms - video review

For greater clarity, I also want to offer a video plot that describes the mechanisms of sofas. True, they have already been discussed above. But, as they taught at school - "Repetition is the mother of learning)))", and this video will facilitate and consolidate your understanding of the topic.

Now you know everything you need to make an informed choice about the mechanisms for transforming sofas. Hope it was helpful.

The sofa is an integral part of the furniture. It serves as a place for relaxation, an area for receiving guests or for evening gatherings with the family. If the area of ​​​​the living room in your apartment or house allows you to install a separate sofa, then there should be no problems with choosing it. However, for small rooms it is worth choosing functional models that combine a sofa and a bed at once. Of course, it is better to purchase a sofa bed ready-made, having previously considered its main features.

The sofa bed is a comfortable design that can be used in the living room to divide the room into several zones, it can also act as a place for meeting guests or just for family conversations. And at night, the furniture can become a full-fledged bed with two sleeping places.

The popularity of sofa beds is ensured by the presence of a number of positive qualities:

• Great for saving space in a small space. The sofa can be easily installed in a one-room apartment, while it can fully replace several pieces of furniture at once;
• special small sofas can be a great sleeping place for children and teenagers. They can be used for 5 years or more. Some models have a sliding design that can be increased;
• for the upholstery of this furniture, high-quality fabric is usually used, which can be cleaned and has long-term wear;
• designs with leather upholstery will be an excellent option for living rooms decorated in a classic style. A leather sofa will give a rich and luxurious look to the interior;
• sofa beds have a simple design, for this reason they can be easily made by yourself. Such an option as a do-it-yourself sofa bed is perfect for a country house;
• inside the sliding sofa has a space that can be easily used to store various things, bedding;
• modern folding sofa beds are equipped with a comfortable orthopedic mattress;
• The mechanism is easy to operate. Roll-out, sliding, folding models can be easily disassembled, even a child can handle this task.

Ways and mechanisms of transformation

Sofa bed for daily use has many positive qualities. But before purchasing this product, it is worth considering its methods and mechanisms of transformation. They are diverse, but at the same time they have distinctive features.

Book

The classic sofa book is a folding design with a simple unfolding mechanism. This model can easily be converted into a double bed. The design has two components, which can be upholstered in dense fabric material.

The components of the sofa are connected by hinged elements. The base of the product is made of durable material. The frame can be made from wear-resistant wood or plain plywood. This model can be installed in a small living room or children's room.

How to unfold and fold the sofa:

• to expand the structure, you need to raise the seat until it clicks;
• after that, the seat is lowered and the sofa unfolds;
• the product is also easy to fold - the seat rises until it clicks;
• then it lowers, and the sofa returns to its original position.

The positive features include the following:

• for folding products with a book mechanism, the design is as simple as possible, which easily rises and falls;
• due to the fact that the product has a simple design, the sofa book can be made independently. But still, to begin with, it is worth carefully studying the drawings;
• a compact sofa allows you to install a closet and a table next to it;
• varied design - the sofa can be upholstered in different materials, which may differ in color and pattern.

Eurobook

The sofa bed with the eurobook transformation mechanism will be a great area for meeting guests in the living room and a sleeping place for two at night. This design can be roll-out and folding.

Due to the fact that products with a eurobook transformation mechanism are multifunctional, practical and wear-resistant, these products can be used for home and summer cottages. They can become a great vacation spot for adults and children.

Unfolding a sofa with a eurobook mechanism is quite simple. The seat needs to be pushed forward, for this it has special roll-out rollers. A niche is formed inside, in which a part of the structure is placed, which acts as a backrest. The result is a spacious double bed.

The positive qualities include:

• small dimensions allow you to install a sofa bed in the kitchen, in the hall, in the children's room;
• when unfolded, the structure takes up as much space as when folded;
• Included is an additional drawer that can be used as a place to store linen, as well as various things.

On sale you can find an interesting model with a dolphin regulation mechanism. It is considered new, but has already managed to gain increased popularity.

The unfolding is done like this:

• in order to expand the sofa, you need to pull the loops that are attached to the section under the seat;
• pull should be up and towards you;
• then the section is pulled out and installed next to the seating part. The result is a spacious sleeping area.

The advantages include:

• the presence of a comfortable sleeping surface;
• the presence of an additional box for linen, which is located in the non-roll-out part;
• simple and easy unfolding;
• possibility of installation in any room.

Pull-out sofas

Sofas with a roll-out transformation mechanism are considered the most reliable and comfortable. This model is perfect for small apartments, in which every free centimeter is important.

The main features of the sofa with a roll-out mechanism include the following points:

• while unfolding the sofa, you need to pull the strap that is attached to the seat. You need to pull it all the way;
• the seat of this model consists of several layers, which, when transformed, are converted into a mattress for a berth;
• the model may have armrests;
• in the assembled state, the sofa has a small size, it can be easily placed in a small living room, bedroom, and children's room. Especially often used by a similar sofa for a kitchen with a berth;
• additional space inside the product eliminates the need to purchase an additional locker for storing bedding.

Stylish sofa bed with an accordion transformation mechanism has two beds. At the same time, it has a high cost, which is associated with the cost of fastening elements. Externally, this design is a sliding frame made of metal material, which has lateral orthopedic lamellas. On the surface of the side slats, a soft part made of a polyurethane base is installed.

The main features of the product include:

• according to the method of parsing, they are similar to roll-out models. During parsing, you need to lift the upper part and pull it slightly towards you. After that, the mechanism rolls out on its own and is fixed in the desired position;
• after the transformation, a spacious and even sleeping surface is formed, which does not have bumps and depressions;
• one and a half sofa with an accordion design is perfect for children. It can be installed in a room for a boy or girl aged 5 years and older;
• models are produced with a spring block and an orthopedic mattress, so there is no need to spend extra money on buying a mattress.

French cot

The French folding bed has a triple folding mechanism, which is located under the seat cushions. This model is new and not yet widespread enough. Before you unfold the sofa with this mechanism, you need to remove the pillows. After that, it is necessary to pull the handles and extend the lower part, and only then the structure gradually unfolds.

Be sure to study the main characteristics of the sofa:

• the bed is a frame, which consists of three sections connected by hinged elements. It is complemented by a soft orthopedic mattress;
• a multifunctional sofa with this transformation mechanism in the assembled state is small in size, so you can easily install it in rooms with a small area;
• it is more suitable for guests. With frequent use and if the permissible load is exceeded, sagging of the mattress may occur;
• the products have a significant drawback, they do not have an internal storage space. Such a model may be without armrests or may have these elements.

Which upholstery is more practical

Folding sofa beds are considered practical products for daily use. But when choosing, you should pay attention not only to the type of transformation of the mechanism, but also to the upholstery. And it can be made from different materials.

Consider which upholstery for sofas is considered the most practical:

• jacquard - this material has a dense, high-quality basis. It is not subject to abrasion, practically does not fade under the influence of sunlight. Able to maintain the original external qualities for a long time;
• flock - many experts say that it is flock fabric that is a practical material for upholstery of sofas. This is due to its good qualities - durability, wear resistance, strength, environmental safety. In appearance, it resembles velvet;
• chenille - this type of material is often used for upholstery of sofas, which is associated with the high strength characteristics of the base. It has a soft and thick pile, which consists of a harmonious combination of synthetic and natural fibers;
• tapestry - this fabric has been used for upholstery of sofas for a long time and still has not lost its popularity. It has high strength, durability, wear resistance.

Basic requirements for the filler

A modern sofa bed can have a variety of types of fillers, on which the convenience and service life of the product depends. Three types of filling material are commonly used:

• spring bases;
• polyurethane foam filling;
• fillers with a combined structure.

Fillers, consisting of springs and polyurethane foam material, have the same base. The main thing is that they are of high quality. In addition to springs and polyurethane foam, materials such as latex, felt, batting can be used.

Products that additionally have latex, batting, felt in filling are perfect for children's rooms. Sofas can be used as a sleeping place for boys and girls aged 5 years and older.

Models with orthopedic mattress

Currently, modern manufacturers of upholstered furniture offer a large number of models of sofa beds, which are equipped with a comfortable orthopedic mattress. They are perfect for any apartment, regardless of the interior and area.

What are the advantages of orthopedic mattresses? Consider the main positive points:

• orthopedic mattresses are designed specifically for humans. It does not put a load on the spine, does not cause discomfort and inconvenience;
• products are able to withstand increased loads, they do not bend or sag;
• can withstand repeated folding and unfolding of sofas;
• the surface of orthopedic mattresses has a relief structure, due to which normal ventilation is carried out, which protects against fungi and mold.

Popular manufacturers of such models include the following companies:

• Ascona is a well-known manufacturer of comfortable upholstered furniture with orthopedic mattresses. When developing, the anatomical features of the structure of the human spine are taken into account, so sofas will never cause inconvenience and discomfort. This manufacturer produces a bed with a sofa below, which combines several functions at once. It is also equipped with an orthopedic mattress with a flat surface. Popular models of sofas from this manufacturer include Karina, Vega, Antares, Karina angular, Orion, Antares angular;
• manufacturer called "A lot of furniture". This is a popular network of furniture factories, which is distributed throughout Russia. In the assortment you can find high-quality models of sofa beds with a structure made of durable solid wood. They are all equipped with a comfortable orthopedic mattress. Popular models include Atlanta, Madrid, Amsterdam, Monaco;
• Ami furniture is a popular furniture brand from Belarus. The manufacturer offers high-quality models of sofa beds, which are made of durable construction with good filler. The following models are considered popular - Jacqueline, Fiesta, Martin, Chester, Fortuna.

When choosing sofas that can be used as beds, you should pay attention to many qualities. It should be borne in mind that this furniture will be used not only for meeting guests or for a place of rest in the living room, but also for a full-fledged sleeping place.