Ouzo flare installation 10 1.4. UZO units for ultrasonic pre-sterilization cleaning of medical instruments (10 liters)

Medical ultrasonic washing is used for effective cleaning, pre-sterilization treatment and disinfection of objects of complex configuration from various materials (metal, glass, plastic).

Due to the acoustic flow of the cleaning solution and cavitation, it effectively copes with dirt, oil and grease films, stains, dental cement, corrosion products, etc.

It consists of an ultrasonic generator, an ultrasonic emitter, a working bath and a plastic stand.

The external surfaces of the unit are resistant to chemical disinfection with any disinfectant approved for use in medical practice for plastic and metal products.

Benefits of a medical ultrasonic cleaner from Elameda:

• It reduces the time spent on processing medical supplies by two to three times while maintaining a high quality of cleaning.
• Significantly reduces the consumption of disinfectants.
• Due to the design features, ultrasonic waves evenly and gently clean contaminated surfaces, preserve the integrity of the tool.
• Deletes invisible to an eye or the pollution located in hard-to-reach spots.
• Significantly reduces the risk of injury and infection.

Technical characteristics of the ultrasonic cleaner UZO-10-01 "MEDEL":

• Usable bath volume: 10 liters
• Bath internal dimensions: 320x252x165 mm
• Overall dimensions of the unit, taking into account the stand and the installation of the working bath in front of the stand: 550x750x500 mm
• Installation weight - 10 kg
• Mains supply: 220(±10%)V or 230(-10%;+6%)V, 50 Hz.
• Power consumption: no more than 200 VA.
• Working ultrasonic frequency: 〖22〗_(-1.6)^(+1.7) kHz.
• Radiated acoustic power range from 75 W to 110 W.
• The range of settable processing time intervals is from 1 to 10 minutes with a setting interval of 1 minute.
• Overall dimensions of the installation, taking into account the stand and the installation of the working bath in front of the stand, no more than (530 × 700 × 500) mm
• Installation operating conditions:
• - ambient temperature from +10°С to +35°С,
• - relative air humidity up to 80% at t +25°С

Equipment UZO-10-01 "MEDEL":

1. ultrasonic generator;
2. Ultrasonic emitter;
3. Working bath - EDPO-10-01 (body, tray, cover);
4. Reflector plate;
5. Plastic stand.

Ultrasonic cleaner UZO 10-01 MEDEL

Today, when the 21st century is in the yard - the century of electronics and high technology, in many Russian medical institutions, contaminated medical instruments (surgical, gynecological, etc.) are manually cleaned by staff, after which they are disinfected and sterilized. When manually washing piercing and cutting tools, it is possible to injure the hands of medical staff, followed by infection with a nosocomial infection.

Ultrasonic cleaners UZO

• designed for pre-sterilization cleaning of instruments and medical products, especially small, complex configuration, piercing and cutting from various contaminants in the form of:
• solid and liquid films from oils and fats of vegetable, mineral (new instruments) and animal origin;
• solid precipitation: dust, bone tissue, etc.;
• water-soluble and partially soluble polar organic and inorganic compounds: sugar, blood, protein, etc.
• corrosion products.

UZO10-01 ultrasonic cleaner treatment area dimensions: 320x245x100 mm. Drainage of the solution from the bath occurs by gravity with the help of a drain tube.

To avoid infection, the instruments are first disinfected, and after that they are manually treated with ruffs, brushes, and cotton-gauze swabs. But here, too, their pitfalls have been discovered: many disinfectant solutions have a fixing effect, after which it becomes even more difficult to clean the instruments. As a result, the complexity of manual cleaning increases many times over. Most of these problems are removed with the introduction of ultrasonic machines into the pre-sterilization cleaning process, namely ULTRASONIC CLEANERS UZO "MEDEL".

Ultrasonic cleaning is the most effective method for washing objects of complex configuration made of various materials (metal, glass, plastic). In this case, the object to be washed is placed in a washing solution, and cleaning occurs due to the action of ultrasound. The main phenomena that provide effective cleaning are acoustic solution flows and cavitation.

Intensification of disinfection measures through the use of ultrasonic washing RCD:

The tool that has passed the disinfection cycle in the EDPO container with a reflective plate pre-laid on the bottom of the pallet is washed under running water right in the tray and placed in the body of the RCD working bath for pre-sterilization cleaning.

After installing the cover with the emitter, the timer sets the time required for cleaning. The set and current time are recorded on a digital display.

The oscillations generated by the ultrasonic emitter cause the appearance of elastic waves and pulsating air bubbles invisible to the eye in a liquid medium. This generates a hydrodynamic effect on the treated surfaces, which results in the removal of contaminants from them into the solution.

After ultrasonic cleaning, the instrument is rinsed again with running water and only then removed from the tray for drying and sterilization.

The quality of cleaning that meets the requirements of the SES is ensured by the operating modes and the fulfillment of the requirements described in the accompanying documentation.

Advantages of ultrasonic cleaning UZO "MEDEL":

Unlike traditional sinks, which are “forced” to work in the area of ​​increased power, UZO ultrasonic washers operate, providing the same cleaning efficiency at powers 2-3 times less.

In the ultrasonic cleaner UZO 10-01, designed for use in dental offices, the ultrasonic emitter is as close as possible to the reflector, forming a zone of increased intensity of ultrasonic vibrations directly below it. The intensity of fluctuations in this zone is sufficient to extract powdery contamination from tooth enamel and fillings from hard-to-reach areas of small dental instruments (for example, from bur slots, wound working sections of dental drills), thereby facilitating work during further machining of instruments, since sonicated dirt is easily removed with a brush or under running water.

And here it is IMPORTANT to emphasize three points:

• the harmful effect of ultrasound on the disinfectant activity (survivability) of solutions is significantly reduced;
• the size of cavitation bubbles is significantly reduced, which leads to an increase in their penetrating ability and, consequently, better cleaning - THEY are able to “crawl through” even in blind holes, crevices of complex rough surfaces, the eye of needles, etc .;
• a gentle cleaning regime is created, which does not lead to damage (blunting) of tools.

The organization of UZO ultrasonic cleaners based on EDPO polymer containers and the structural arrangement of the ultrasound source in the lid gives a number of obvious advantages over their counterparts:

• allows you to increase labor productivity due to the possibility of a streaming method of processing;
• provide the possibility of ultrasonic treatment at any stage of the stages of disinfection and pre-sterilization cleaning, i.e. at any time while the instruments are in the pallet;
• allows you to exclude tactile contact with the processed instrument, starting from the moment it is collected after use until the sterilization stage;
• leads to the possibility of economical use of disinfectants and detergents.

Manufacturer: Russia.

Description: UZO-10-01 consists of an ultrasound generator connected by a cable to an emitter located on the lid of commercially produced container-containers for EDPO disinfection, and a metal reflector plate. In addition, the installation includes a body and a pallet borrowed from EDPO. Thus, the interchangeability of cases and trays is ensured, which makes it possible to exclude the contact of the operator's hands with the instrument when loading (transferring) it into the installation after disinfection in a similar EDPO container. An inextricable chain of preparing the instrument for sterilization is provided - laying a metal reflector plate on the bottom of the tray and loading the instrument into the tray; placing the pallet with the instrument in a container with a disinfectant; disinfection within the set time; taking out the pallet and washing it in running water; placing the tray in another (from the installation kit) container with detergent; installation of a cover with an emitter; ultrasonic cleaning; taking out the tray with the cleaned instrument and rinsing it in running water. If the disinfectant has detergent properties, the disinfection process is combined with PSO. Note: with a large processing flow and the availability of EDPO of the corresponding volumes, the plant provides for the supply of an additional number of reflectors to health facilities, which are necessary to ensure a continuous process of pre-sterilization cleaning. Ultrasonic cleaning is the most effective method for washing objects of complex configuration made of various materials (metal, glass, plastic). In this case, the object to be washed is placed in a washing solution, and cleaning occurs due to the action of ultrasound.

Purpose: ultrasonic unit (washer) UZO 10-01 “Medel” is designed for pre-sterilization cleaning of instruments and medical products, especially small, complex configuration, piercing and cutting from various contaminants in the form of solid and liquid films from oils and fats of vegetable, mineral (new instruments) and animal origin; solid precipitation - dust, bone tissue, etc.; water-soluble and partially soluble polar organic and inorganic compounds - sugar, blood, protein, etc.; corrosion products.

Specifications: the working volume of the bath is 10 liters. The processing area dimensions are 320x245x100 mm. Drainage of the solution from the bath occurs by gravity with the help of a drain tube.

Types of indication:

Availability of power supply from the network;

processing mode;

The presence or absence of contact between the radiating plate and the solution;

Set and remaining processing time.

Consumed electrical power - no more than 200 VA.

Weight no more than 9.7 kg

Today, when the 21st century is in the yard - the century of electronics and high technologies, in many Russian medical institutions, contaminated medical instruments (surgical, gynecological, etc.) are manually cleaned by staff, after which they are disinfected and sterilized. When manually washing piercing and cutting tools, injury to the hands of medical staff is possible, followed by infection with a nosocomial infection.

Ultrasonic cleaners UZO

designed for pre-sterilization cleaning of instruments and medical products, especially small, complex configuration, piercing and cutting from various contaminants in the form of:

• solid and liquid films from oils and fats of vegetable, mineral (new instruments) and animal origin;
• solid precipitation: dust, bone tissue, etc.;
• water-soluble and partially soluble polar organic and inorganic compounds: sugar, blood, protein, etc.
• corrosion products.

UZO10-01 ultrasonic cleaner treatment area dimensions: 320x245x100 mm. Drainage of the solution from the bath occurs by gravity with the help of a drain tube.

To avoid infection, the instruments are first disinfected, and after that they are manually treated with ruffs, brushes, and cotton-gauze swabs. But here, too, their pitfalls have been discovered: many disinfectant solutions have a fixing effect, after which it becomes even more difficult to clean the instruments. As a result, the complexity of manual cleaning increases many times over. Most of these problems are removed with the introduction of ultrasonic machines into the pre-sterilization cleaning process, namely OF ULTRASONIC CLEANERS UZO "MEDEL".

Ultrasonic cleaning is the most effective method for washing objects of complex configuration. made of various materials (metal, glass, plastic). In this case, the object to be washed is placed in a washing solution, and cleaning occurs due to the action of ultrasound. The main phenomena that provide effective cleaning are acoustic solution flows and cavitation.

Intensification of disinfection measures through the use of ultrasonic washing RCD:

• The tool that has passed the disinfection cycle in the EDPO container with a reflective plate pre-laid on the bottom of the pallet is washed under running water right in the tray and placed in the body of the RCD working bath for pre-sterilization cleaning.
• After installing the cover with the emitter, the timer sets the time required for cleaning. The set and current time are recorded on a digital display.
• The oscillations generated by the ultrasonic emitter cause the appearance of elastic waves and pulsating air bubbles invisible to the eye in a liquid medium. This generates a hydrodynamic effect on the treated surfaces, which results in the removal of contaminants from them into the solution.
• After ultrasonic cleaning, the instrument is washed again with running water and only after that it is removed from the tray for drying and sterilization.
• The quality of cleaning that meets the requirements of the SES is ensured by the operating modes and the fulfillment of the requirements described in the accompanying documentation.

Advantages of ultrasonic cleaning UZO "MEDEL":

Unlike traditional sinks, which are "forced" to work in the area of ​​increased power, UZO ultrasonic washers operate, providing the same cleaning efficiency at 2-3 times less power.

And here it is IMPORTANT to emphasize three points:

1. the harmful effect of ultrasound on the disinfectant activity (survivability) of solutions is significantly reduced;
2. the size of cavitation bubbles is significantly reduced, which leads to an increase in their penetrating ability and, consequently, better cleaning - THEY are able to "crawl through" even in blind holes, crevices of complex rough surfaces, the eye of needles, etc.;
3. a gentle cleaning regime is created, which does not lead to damage (blunting) of tools.

The organization of UZO ultrasonic cleaners based on EDPO polymer containers and the structural arrangement of the ultrasound source in the lid gives a number of obvious advantages over their counterparts:

• allows you to increase labor productivity due to the possibility of a streaming method of processing;
• provide the possibility of ultrasonic treatment at any stage of the stages of disinfection and pre-sterilization cleaning, i.e. at any time while the instruments are in the pallet;
• allows you to exclude tactile contact with the processed instrument, starting from the moment it is collected after use until the sterilization stage;
• leads to the possibility of economical use of disinfectants and detergents.

Ultrasonic cleaner UZO 10-01 "MEDEL" with a bath with a working volume of 10 liters is designed for pre-sterilization cleaning of medical instruments.

Overall dimensions: 320x245x100

Useful volume: 10l.

Today, when the 21st century is in the yard - the century of electronics and high technologies, in many Russian medical institutions, contaminated medical instruments (surgical, gynecological, etc.) are manually cleaned by staff, after which they are disinfected and sterilized. When manually washing piercing and cutting tools, injury to the hands of medical staff is possible, followed by infection with a nosocomial infection.

Ultrasonic cleaners UZO

designed for pre-sterilization cleaning of instruments and medical products, especially small, complex configuration, piercing and cutting from various contaminants in the form of:

Solid and liquid films from oils and fats of vegetable, mineral (new instruments) and animal origin;
- solid precipitation: dust, bone tissue, etc.;
- water-soluble and partially soluble polar organic and inorganic compounds: sugar, blood, protein, etc.
- corrosion products.

UZO10-01 ultrasonic cleaner treatment area dimensions: 320x245x100 mm. Drainage of the solution from the bath occurs by gravity with the help of a drain tube.

To avoid infection, the instruments are first disinfected, and after that they are manually treated with ruffs, brushes, and cotton-gauze swabs. But here, too, their pitfalls have been discovered: many disinfectant solutions have a fixing effect, after which it becomes even more difficult to clean the instruments. As a result, the complexity of manual cleaning increases many times over. Most of these problems are removed with the introduction of ultrasonic machines into the process of pre-sterilization cleaning, namely, ULTRASONIC CLEANERS UZO "MEDEL".

Ultrasonic cleaning is the most effective method for washing objects of complex configuration. made of various materials (metal, glass, plastic). In this case, the object to be washed is placed in a washing solution, and cleaning occurs due to the action of ultrasound. The main phenomena that provide effective cleaning are acoustic solution flows and cavitation.

Intensification of disinfection measures through the use of ultrasonic washing RCD:

The tool that has passed the disinfection cycle in the EDPO container with a reflective plate pre-laid on the bottom of the pallet is washed under running water right in the tray and placed in the body of the RCD working bath for pre-sterilization cleaning.
- After installing the cover with the emitter, the timer sets the time required for cleaning. The set and current time are recorded on a digital display.
- The vibrations generated by the ultrasonic emitter cause elastic waves and pulsating air bubbles invisible to the eye to appear in the liquid medium. This generates a hydrodynamic effect on the treated surfaces, which results in the removal of contaminants from them into the solution.
- After ultrasonic cleaning, the instrument is washed again with running water and only after that it is removed from the tray for drying and sterilization.
- The quality of cleaning that meets the requirements of the SES is ensured by the operating modes and the fulfillment of the requirements described in the accompanying documentation.
Advantages of ultrasonic cleaning UZO "MEDEL":

Unlike traditional sinks, which are "forced" to work in the area of ​​increased power, UZO ultrasonic washers operate, providing the same cleaning efficiency at 2-3 times less power.

And here it is IMPORTANT to emphasize three points:

1. The harmful effect of ultrasound on the disinfecting activity (survivability) of solutions is significantly reduced;

2. the size of cavitation bubbles is significantly reduced, which leads to an increase in their penetrating ability and, consequently, better cleaning - THEY are able to "crawl through" even in blind holes, crevices of complex rough surfaces, the eye of needles, etc.;

3. a sparing cleaning mode is created, which does not lead to damage (blunting) of tools.

The organization of UZO ultrasonic cleaners based on EDPO polymer containers and the structural arrangement of the ultrasound source in the lid gives a number of obvious advantages over their counterparts:

Allows you to increase labor productivity due to the possibility of a streaming method of processing;
- provide the possibility of ultrasonic treatment at any stage of the stages of disinfection and pre-sterilization cleaning, i.e. at any time while the instruments are in the pallet;
- allows you to exclude tactile contact with the processed instrument, starting from the moment it is collected after use until the sterilization stage;
- leads to the possibility of economical use of disinfectants and detergents.