For inspiration! There is only one recipe - but there are many ideas! The most pleasant thing is that there are no exact proportions - a little more foam, and you will get a home-made mass for modeling, a little more soda - and the toy snow is ready!

I'll tell you right away twhich option is suitable for children from 3 years old, as you need to be sure that the mixture of shaving foam and soda does not end up in your mouth.

Also, it's better to use hypoallergenic shaving foam if the child's skin is prone to allergic reactions (or not to use at all).

Option number 1 "Shaving foam ice cream and soda"

How to do: we take the most budgetary bottle of shaving foam, squeeze the foam into a container and mix with soda. In this version, you need to add more foam so that you can sculpt the balls. "Ice cream" is laid out in silicone molds for baking.

On top, our ice cream is sprinkled with colored rice, which we used as a pastry topping.

How to color rice I am sure that everyone has already dyed rice and made the most incredible developmental ideas out of it. Throughout the history of our touch games, I have tried many painting recipes, and settled on this one. Compound: - rice - food coloring (for example, Easter) - water (or alcohol) - painting containers - rice containers - the spoon How to do: 1. We distribute rice in a container (by the number of flowers). 2. Add a small amount of alcohol or water (about 1 tsp) to food coloring, stir and pour into containers. 3. Thoroughly mix the rice with a spoon until it is colored. 4. Leave to dry (it is better to put the rice on plates and distribute it in an even layer, if these are small portions, it will dry faster). 5. When the rice is dry, it will need to be transferred to storage containers.

Option #2 "Frozen Yogurt with Shaving Foam Fillers"

How to do: this is a very simple option - just squeeze the foam into the cups, and sprinkle with home-made fillers. Everything can be treated or sold to "sweet teeth"!

As cups for yogurt and fillers - here is such an "entertaining pyramid".

As spoons for ice cream and for fillers - here are such culinary measuring spoons (they are attached to a ring - it is convenient to store).

How to make filler: we take figured children's pasta and "cobweb", pearl barley and split peas. All this is painted in the same way as rice. Instead of "chocolate" - you can sprinkle with chicory or ground coffee.

Option number 3 "Soufflé with shaving foam and food coloring"

Colored shaving foam with food coloring can be used as a substitute for finger paints, but why not turn it into an airy soufflé for a toy candy store!

Option number 4 "Cheesecake with whipped cream"

How to do: take a household sponge, cut it diagonally - our "rainbow cheesecake" is ready! Squeeze out all the shaving foam on top - as whipped cream and sprinkle with whatever you like.

Option number 5 "Mass for modeling"

It can be called snow, and sand and snowy sand, since the mass turns out to be crumbly, but excellent "kus" are obtained from it, like from sand.

How to do: mix shaving foam and soda, but this time you need to put more soda!

It remains to arm yourself with molds or build walls.

Such "cakes" can be decorated with details from a children's mosaic.

No. 6 "Cakes" made of cardboard and napkins

And here, another "dessert" idea, this time - from cardboard and ordinary napkins.

For the cakes you will need:

- cardboard circles (base)

- colored rice

- cotton pads

- glue

- paper napkins

How to do:

1. Cut out small circles for the base from the remnants of cardboard boxes. To draw a circle evenly, you can simply attach a small saucer.

2. We cut colored paper napkins into pieces (I had the most budget option from Auchan).

3. Cut out "icing" from cotton pads. 4. We paint the rice - this will be our "pastry dressing".

Now, we apply glue to the cardboard base and "cook" our cakes - i.e. post all this beauty. Then, apply more glue and sprinkle with colored rice. That's it, you can play and feed the entire puppet-toy company!

Guys, we put our soul into the site. Thanks for that
for discovering this beauty. Thanks for the inspiration and goosebumps.
Join us at Facebook and In contact with

Girls are the treasure of our world. Therefore, they try to look and behave accordingly. But you must admit that always being on top is not an easy task.

So website collected cool tricks that can make life easier for every representative of the weaker sex.

18. Lemon and honey

17. Pencil and lip balm

A very hard eyeliner can be dipped in a little lip balm. This will soften the lead and make it easier to use the pencil.

16. Hashtag and smoky eyes

For a quick and easy smoky eye, draw a grid on the outer corner and blend it gently with a brush or sponge. For darker eyelid makeup, repeat the action several times.

15. A jar of antiperspirant and oil

A jar of roll-on deodorant, after washing, can be used as a massager. You just need to apply a few drops of oil on your face and distribute it with a ball. Cool massage and tightened skin are guaranteed.

14. Suspenders and jeans

Suspenders and jeans are a classic pair. But together they can also work in a very unusual way. If the jeans are wide at the waist, attach the suspenders to the back of the belt loops - and you will get a perfectly fitting jeans.

13. Hand cream and apple cider vinegar

If a regular hand cream does not provide the desired moisture, then you can add a couple of drops of apple cider vinegar to it. Moisturizing your hands with such a cream, after a week you will not recognize your skin, it will be so soft.

12. Tape or band-aid and toes

While walking in heels, strong pressure is created on the foot and the nerve located between the middle and ring fingers. Connect these two fingers together with a band-aid and enjoy long walks in high heels.

11. Shaving foam and sugar

A great homemade facial scrub can be made with shaving foam and sugar. This simple combination will not cause irritation, but will make the skin soft and tender.

10. Colored nail polish stains

Dark and bright nail polishes, after rinsing off, most often leave pigment on the nails. For a complete cleaning, you need to mix hot water, hydrogen peroxide and soda and hold your nails in this solution.

9. Liner and lens solution

To revitalize dry eyeliner, add a couple of drops of special lens solution to it.

8. Sequins and foil

To give your lips a little volume, just use regular toothpaste. The paste must be distributed on the lips and, after waiting a bit, rinse.

If a man lives in the house, then a whole mountain of accessories automatically comes with him. Cooler than the toy Ken from childhood. Among the "accessories" there will certainly be shaving foam. Even if the faithful / brother / son is a fashionable bearded man. It turns out that this hygiene product, in addition to the main one (to pacify facial hair and not only), has at least 10 additional and completely unexpected functions. Details are below.

Through trial and experiment, it turned out that the usual shaving foam is a very useful thing in the household. After all, with its help you can not only get rid of the bristles, but also put things in order in the whole house. For example:

1. Clean the carpet from stains

Treat the stain with foam, walk on top with a damp sponge and leave to dry naturally. Vacuum after a few hours, removing the remnants of the dried foam, and rejoice at the clean carpet again.

2. Clean and polish stainless steel surfaces

A layer of shaving foam and a dry sponge will return the presentation to both old pans and your favorite refrigerator.

3. Keep the bathroom mirror from fogging up

Treat the surface with foam, wait half a minute and wipe dry. The product forms a thin water-repellent film that will not allow the glass surface to fog up under the influence of steam. The trick will also work with shower doors, glasses, windows, and other glass/mirror objects.

4. Remove traces of careless manicure from the skin

Often, trying to restore beauty in a hurry, girls accidentally smear varnish everywhere (except for the nails themselves). A small amount of shaving cream will solve this problem. Sprinkle the errors and rub a little. The lacquer will peel off the skin, but will remain "sit" on the nails.

5. Clean your jewelry

The composition of the shaving foam is not aggressive, does not contain harsh abrasive particles, but is full of cleansing components. This makes her an excellent candidate for delicate work such as cleaning jewelry. The recipe is the same: add a small amount of foam, wipe, dry naturally.

6. Clean stains on the stove or oven without scratching

The explanation is a combination of points 2 and 5. And, yes, you can safely arm yourself with a metal brush for dishes.

7. Mute a creaking door

Try lubricating the loops with shaving foam. Perhaps this will not eliminate the problem forever and completely, but it will give you at least a couple of evenings in silence.

8. Soothe skin after sunburn

The secret is in the softening ingredients and the cooling effect. It will also help relieve itching from insect bites.

9. Make paint for children that can be safely painted on windows and furniture

Just add some food coloring to the foam. Kids will be delighted with permissiveness, and you can easily eliminate the consequences of children's creativity with the help of an ordinary wet sponge.

10. Going on a hike? Take a small bottle of shaving foam with you

After all, with its help you can wash the camping pot to a shine, grease from your hands and soothe the skin after contact with the sun's rays and obsessive insects.

In addition to shaving foam, another household assistant with high efficiency is the usual one.

For many men, foam is the usual shaving agent, but what if the product runs out at the right time and you need to safely remove the stubble? Indeed, only thanks to shaving foam, a man can easily and easily remove excess facial hair and not damage the integrity of the facial skin. Experts advise using folk recipes and making foam yourself.

Few men know how to make shaving foam and what is even possible. In fact, the experience of previous generations shows that even a few improvised means can be used to make such a shaving product at home. It can be ordinary soap, solid oils and a soap base, to which various useful components are added.

In fact, shaving foam with your own hands is quite real, and any man can cope with such a task. Moreover, alternative means are in no way worse than foam, if properly prepared according to the recipe and used immediately for its intended purpose.

To prepare homemade foam for safe, gliding and gentle stubble removal, you can use:

• toilet or simple laundry soap;
• solid vegetable oils;
• soap base and additional components to it.

The first version of the soap-based foam is ideal for men with normal and oily skin types, as the alkalis in the soap remove fat and disinfect the epidermis. The soap base can be supplemented with plant extracts, moisturizers and essential oils, making it ideal for sensitive skin. And on an oil basis, it turns out more like a shaving cream that will moisturize and soften dry skin type.

Important! Do-it-yourself shaving foam should be used immediately after preparation, as it will whip and after some time the effect of the foam may be lost.

Recipes for home cooking

Many men have long known how to whip shaving foam from soap, when shaving cosmetics were not invented. Having no alternative, all the men foamed a simple soap and applied such a product to the skin of the face with a brush, after which they removed the stubble with a straight razor.

Soap

Today, to prepare an alternative foam from soap, you will need to use the following improvised means:

• toilet or laundry soap;
• shaving brush;
• water temperature of about 50 degrees;
• ceramic bowl.

To whip soap to a state of foam, experts advise choosing a shaving brush from badger hair. First, you need to dip the shaving brush in warm water and leave it there for a few minutes to steam out the villi. Next, the brush must be shaken off the rest of the water, and then rubbed over the surface of the soap until foam appears. The resulting foam must be quickly transferred to a bowl until the desired amount is collected in it.

Using warm water, you can adjust the density of the foam, adding a few drops as needed. After that, the foam is immediately applied to the skin of the face with a brush, if necessary, the foam can be constantly whipped with a brush. It is imperative to shave with a machine with sharp blades, as you can damage the skin and bristle hairs. After the procedure, it will be enough to wash with cool water and apply a moisturizer after shaving.

From soap bases

The soap base is sold in any pharmacy or specialized stores, it is used by people who independently prepare natural products for hygiene procedures. In creating shaving foam from such a base, you can also turn on fantasy and add various valuable components. For example:

• glycerol;
• oils (peach, almond, coconut, grape seed, citrus, shea, jojoba, wheat grains);
• decoctions on herbs;
• essential oils.

In addition, you will need dishes for preparing the product on a steam bath, a grater and a container for the finished product. On a grater, you need to grate a piece of soap or cut the soap base into pieces, heat it in a steam bath and pour in about 100 ml of herbal decoction. The product is stirred until the soap melts, you can add a little sea salt to speed up the absorption of soap and rejuvenate the skin of the face with salt minerals.

Half a teaspoon of vegetable oil, glycerin are added to the product, vitamin E and a couple of drops of essential oil for aroma can be added (but ether is added to the cooled product). Using a mixer or a simple whisk, the finished soap should be whipped until foam forms. After that, the agent is poured into the finished container and can be used for its intended purpose.

From solid oils

You need to choose your own shaving oil, taking into account personal preferences and skin response characteristics. Experts advise choosing from the following options for solid oils:

• Shea Butter;
• coconut;
• pistachio;
• cacao butter;
• almond oil;
• mango butter.

In addition, you will need a container, a couple of drops of any essential oil and water. You can mix several oils in equal proportions, melt them in a water bath to a liquid state, add a little olive oil or vitamin E and mix well. Add esters to the cooled product and beat with a whisk or mixer. After that, the self-prepared foam cream can be used for shaving.

For reference! All of the above recipes, how you can make your own shaving foam, are in demand among men all over the world, they protect the skin from injury, nourish and moisturize, taking into account the needs of the skin.

Important nuances in cooking

Before using the prepared product, you need to test it for an allergic reaction. To do this, a small amount of homemade foam should be applied to the skin of the wrist or on the bend of the elbow, and then check if redness appears on the skin. If the skin does not respond, this alternative foam can be used to remove excess facial hair.

The choice of recipe by skin type is as follows:

• dry skin - foam from solid vegetable oils;
• normal and oily skin - foam from laundry or toilet soap;
• sensitive skin - natural soap base foam.

Brushes for applying foam to the face are best used from natural materials. For sensitive and dry skin, liquid glycerin and vitamin E must be added to the composition of the homemade product to ensure the machine slides, nourishes and moisturizes the skin after such a procedure. Any prepared shaving foam should be used once, and fresh foam is prepared for the next procedure.

Conclusion

Do-it-yourself shaving foam is ideal for those men who have an allergic reaction to most cosmetics. Foam can be prepared from solid vegetable oils (cream foam will turn out), from a soap base (an alternative to shaving gel), as well as from simple toilet or laundry soap. In creating foam at home, you can give free rein to creative impulses and fantasies by adding any other valuable substances and components to cooking recipes.

Many children like to play with a jelly mass that does not stick to their hands. It can take various forms. This toy is called a slime or slime. It was invented in the USA. Many children have fun with this unusual "plasticine".

Buying such a toy is not difficult. However, you can create it yourself. will be discussed in detail below. There are several options for how to cook such a toy yourself.

Slime can be made from a variety of materials. The properties of the toy will depend on the chosen method. To understand to how to make slime out of shaving foam, several methods must be considered. All of them involve the use of various improvised materials.

Shaving foam helps to give volume to the mass. It contains certain chemicals that may be harmful to the body if ingested. Therefore, parents should ensure that the baby does not try to send the resulting mass into the mouth.

Some recipes use the simplest ingredients that are always on hand in every home. For other methods, you will have to purchase special substances, such as sodium tetraborate (borax). The simplest and most effective recipes will be discussed below.

The slime bought in the store is a bright, interesting toy. It doesn't stick to hands. However, when making slime at home, you should not expect the absolute similarity of the final product with the purchased version. Considering this, you need to be prepared for this.

If glue, starch and other similar elements are used in the manufacturing process of the toy, the mass will still stick to the surfaces a little. Therefore, do not throw it on the floor, wallpaper and other objects.

To make the slime as colorful, you will need to choose the right dye. It is best if it is edible. There are many different color options available for sale. Children love bright colors. It is these colors that should be preferred.

Shaving foam can be very different. You can choose products from almost any manufacturer.

The easiest way

Almost anyone can create. In this case, you do not need to choose a special glue. This is the easiest and safest way to create slime. First you need to mix the mass of starch and water.

Add the same amount of dry matter to a glass of warm water. Starch can be added if necessary. The maximum allowable concentration can be 350 g of dry matter per 1 glass of water. The composition should be thoroughly mixed. After that, shaving foam is added to the starch mass. It will take quite a lot.

If desired, at this point you can add a little dye to the mass. Then everything is thoroughly mixed again. The result is a homogeneous mass with which the baby can have fun playing. It won't stick to your hands too much. However, it cannot be eaten.

Recipe with PVA glue

Another easy recipe is slime made of PVA and shaving foam. It is better to choose the freshest ingredients. It is also necessary to prepare starch and warm water.

First, the starch mass is kneaded according to the above scheme. Dye is added to it. Some masters add sparkles to it. This gives a lot of unusualness. It should not have lumps, so all ingredients must be thoroughly mixed. Next, shaving foam is added. Again, everything needs to be mixed.

At the final stage, PVA glue is introduced into the mass. Soda can be used instead of starch. For 100 g of water, 50 g of glue will be required. Starch or soda add 1 tablespoon. In this case, the mass will be more brilliant. This is also an interesting recipe that can be considered one of the easiest and safest.

Slime from glue "Titan"

May be more complex. In this case, you will need to purchase not just PVA, but a special glue. It's called "Titan". In this case, starch is not required. You can buy titanium glue in hardware stores. It should also not be ingested by the child. Parents of young children should be aware of this.

It is recommended to knead the slime in a strong plastic bag. It is necessary to pour the contents of a can of shaving foam into it. For two parts of foam you need three parts of glue. It must be very fresh. Next, the contents of the package must be shaken well. The ingredients must be thoroughly mixed. The mass will thicken.

Before applying the glue, you can add a dye. The choice depends on the taste preferences of the child. He himself can choose the color of his future toy. And you can show imagination. Instead of the usual food coloring, you can add sparkles of various sizes. In this case, the slime will be original and interesting.

Slime with boron

In its appearance, it is closest to the version bought in the store. Therefore, you will have to purchase sodium tetraborate powder at the pharmacy. You can also use a liquid solution (4%). A drug such as Borax is also suitable. You should also purchase fresh PVA glue, dye.

Pour the glue into the prepared plastic bag. Dye is added to it. That's where the shaving foam comes in. The mass is thoroughly mixed. Carefully pour the boron solution into the bag. You will need 1 vial of liquid agent or pre-prepared dry matter. 1 tablespoon of sodium tetraborate powder is mixed with half a glass of water.

After that, you will get a jelly mass. It is necessary to remove excess moisture from it. The resulting slime must be well blotted with a napkin. The clot needs another five minutes to rumple in the bag. After that, they can play.

Glue and foam slime

making slime made of glue and shaving foam, you can use the simplest components. The easiest recipe suggests avoiding the addition of starch, boron and other substances.

Just a dye is added to the PVA glue. A little foam is poured into it. The whole procedure is also performed in the package. Next, the mass is thoroughly mixed until it thickens. Then the resulting slime is taken out of the package and also wrinkled with hands for a long time. This procedure will take quite a lot of time. However, after the glue dries, you get a slime that is very similar to the purchased version.

This is an easy and safe way to make slime at home. After playing with such "plasticine", the child should wash his hands thoroughly.

After the game, the child should put the slime on paper. This will prevent lint, dirt and other foreign objects from getting into the clot. In this case, you can play slime for a longer time.

If the baby does not put the slime in his mouth, this toy is considered absolutely safe. After using it, wash your hands thoroughly. Too much dye to put in the mass is not recommended. The toy will leave marks on hands, clothes.

It is necessary to store the clot in a cool place and in a closed container. The mass should not dry out. If this does happen, you can put the clot in warm water for a few minutes. After that, the slime needs to be kneaded. It can be used again in the game.

Having considered how to make slime out of shaving foam and other components, you can independently make an interesting children's toy.