Jewelry made from lightning master class. Magnificent flowers from lightning: Master class Decorations from metal lightning

Zipper is one of the most popular types of fasteners. Recently, the zipper has been at the peak of popularity. Products with an abundance of zippers are considered very fashionable. A huge number of things are made from zippers: clothes, handbags, jewelry. You can make original zipper products with your own hands. For example, you can make a stylish necklace.

To do this you will need:
1. zipper (3 pieces, 18-20 cm each)
2. satin ribbon (40 cm)
3. clasp
4. beads (5 pcs.)
5. superglue
6. threads
7. needle
8. scissors
9. a small piece of adhesive paper or fabric

Step 1.
We take one zipper, trim the fabric from the bottom and along the edges, leaving 0.5-0.7 cm from the edge of the teeth. Burn the cut edges with matches or a lighter.

Unfasten the zipper. Sew a bead onto the top edge. We begin to wrap the right edge of the zipper clockwise, the left - counterclockwise. We fasten each turn well with several stitches on the wrong side.

In this way we get a right and left circle in the center with a slider. This element will serve as the center of the necklace.

Step 2.
Take the second zipper and divide it into two parts. We save the slider, it will be useful to us. Trim off the excess fabric, leaving 0.5-0.7 cm from the edge of the cloves. Scorch the cut edges.

We roll each part of the zipper into a circle, securing each turn with several stitches.

Step 3.
We also divide the third zipper into two parts, cut and singe the edges. We save the slider. We divide each part in half, we get four parts. From each part we form an eight.

Step 3.
We divide the satin ribbon into two parts, singe the edges and connect it with the clasp. The necessary clasp can be removed from an already outdated and unnecessary decoration or purchased in the sewing accessories department.

Step 4.
We sew the prepared parts together one by one, getting the central part of the necklace.

Step 5.
We sew the already prepared ribbon with a clasp to the edges of the central part of the necklace. Thread stitches are visible on the reverse side of the necklace. To make the work look neater, they need to be closed. We take adhesive paper or just fabric, cut out the part in the shape of a necklace and glue it with glue, covering the thread stitches.

Photo: mayaroad.typepad.com

To create such a flower, the zipper must be unzipped and divided into two separate strips. Next, use a needle and thread and your imagination.

2. Decoration for decorative pillows

Photo: @luys_design

Sew the open zipper to the corner of the pillow and decorate with embroidery and beads of your choice.

3. Decorative clasp for a bag

Photo: @ykkmono

A zipper with deliberately large teeth and a “dog”, sewn to an ordinary textile bag, will become both a fastener and an unusual decorative element.

: history of the clasp

4. Unusual necklace

Photo: @missshop_

A metal zipper can be turned into an unusual necklace. To do this, cut the fabric braid close to the teeth, decorate the resulting base and “dog” with pendants and beads, and sew a lace or thin strap with fasteners to the ends of the zipper.

5. Decoration for a denim jacket

Photo: @bourgeoisdefrance

To add a personal touch to a denim jacket, sew zipper halves from the inside to the edges of the sleeves, collar and hem, with the teeth peeking out. You can add an applique on the back or leather inserts and also trim them with a zipper.

: Master Class

6. Cosmetic bag made of zippers

Photo: zszywka. pl

To make such a cosmetic bag, you need to sew several zippers of the same length with plastic teeth into a single fabric, then fold it in half and sew it on the sides. The resulting cosmetic bag can be opened from the top, side, and bottom!

7. Lightning bracelet

Photo: truebluemeandyou.com

You can make an original bracelet from a zipper with metal teeth. In addition to the zipper itself, you will need a clasp for the bracelet and a metal chain and/or rivets for decoration.

8. Decorations for a bracelet made from lightning dogs

Photo: @luys_design

The “dogs” from the clasps can be used as decoration for jewelry - for example, for a bracelet.

9. Elegant lightning necklace

Photo: @jewelsonjourney

To make this unusual and even elegant necklace, several zippers with metal teeth and braid that harmoniously match in color are suitable. The pieces of zipper halves must be rolled into cylinders of different sizes and fastened together. Don't forget the clasp.

10. “Dog” as a pendant

Photo: @missydeethatsme
If you have a really beautiful “dog”, for example, from a broken zipper, you can hang it on a chain and wear it around your neck as an original pendant.

The zipper, familiar to everyone since childhood, greatly simplifies our daily life. The main purpose of such a thing is to connect various parts, from pockets on children's clothing to overalls for astronauts. But, besides this, such a clasp can, if desired, be successfully used for making a variety of crafts and original jewelry.

In the skillful hands of needlewomen, an ordinary fastener can be transformed in the most radical way. Such clasps are used to create elegant brooches, graceful necklaces, original bracelets, unusual earrings, modest pendants, hairpins and headband decorations.

Let's look at some spectacular crafts for beginners step by step.

Lightning bracelet

To make an original bracelet from such a clasp you will need to do the following:

1. You need to cut off half of a long zipper so that it can be wrapped around your wrist twice.
2. The halves obtained in this way need to be glued together and buttons or Velcro fastened at both ends.
3. Now you need to take 2 more zippers of the same color and cut them as close to the teeth as possible. After this, they must be glued along the entire length to the bracelet, laying them in the form of a spiral pattern. Excess glue can be removed with a toothpick.

Lightning flower

To make an elegant rose you need to prepare:

• lightning;
• needle and thread;
• bead or any other suitable decor.

Technique:

1. The clasp must be divided into 2 parts. Then you need to pass a thread along the entire zipper (as shown in photo 1).
2. Now you can proceed directly to making the flower, forming an assembly to form the center.
3. Next, you should sew the second part of the fastener and wrap it around the middle of the flower, tightening the second part more loosely.
4. You need to sew a bead in the center of the flower.

Advice! If desired, such a rose can be supplemented with leaves, using green accessories for this purpose.

Lightning flower with petals

To make a product like this, you will need:

• lightning;
• scissors;
• glue;
• a piece of felt.

Technique:

• The clasp must be divided into 2 parts, removing the slider from it.
• One of the halves needs to be cut into 6 identical fragments. They will act as large petals.
• The second half should be cut into 6 smaller fragments so that there is still one large fragment left for the central part of the flower.
• The center of the flower must be glued. First you need to bend the edge, then, adding glue, roll up a large piece.

• Small and large fragments must be glued together to form full-fledged petals.

• A circle of small diameter should be cut out of felt and first large and then small petals should be glued onto the felt base (photo 8-11).
• Finally, you need to glue the middle of the flower. It is not recommended to use a lot of glue.

Lightning with pendant

You can make a cute heart-shaped pendant from such an item. Such an accessory will look gentle and light. You can take an unconventional approach to creating an unusual decoration by using such a clasp as a pendant for any pendant you like.

Another original option is to use a beautiful “dog” left over from a broken clasp as a pendant.

Lightning earrings

For making original earrings you will need:

• metal zipper - 2 pcs.;
• needle and thread;
• fishing line;
• locks for earrings.

Technique:

1. The fastened fittings must be trimmed so that the fabric remains 3-4 mm. The retainer also needs to be cut off.
2. Then the fastener needs to be divided in half, bent inward from one edge by 3-5 mm and stitched with thread.
3. Next, the zipper should be wrapped in a circle in 3 rows and all rows should be sewn together with fishing line to secure it (during the sewing process, you need to insert a needle every 2 teeth). The clasp must be wrapped in this way until the desired size of the decoration is achieved.
4. Make a second similar piece in the same way.
5. Locks must be securely attached to the workpieces obtained in this way. The original earrings are ready.

Lightning Necklace

Original necklace by Olga Zimina. To make a spectacular necklace from such accessories, You will need the following tools and materials:

• metal zipper (90 cm);
• chain;
• needle and thread of the same shade as the zipper;
• grosgrain ribbon (6 mm);
• felt;
• scissors;
• Super glue;
• lighter.

Technique:

• The fastener must be opened and unnecessary edges cut off. Each part needs to be divided in half and the sections are sealed with a lighter so that they do not crumble. Three pieces of fittings will be needed to form a braid, and the fourth will be needed for decoration.
• You need to sew a chain on one or two segments.
• Three sections must be secured with thread. It is necessary that the outer segments be positioned with the teeth facing outwards.

• As a fastener, you need to attach a grosgrain ribbon, under which you need to hide the edges of the braid, making several turns and securing with glue.
• To decorate the necklace, you need to make the main decorative element from the remaining zipper. To do this, the textile edge of the zipper should be cut off a little and scorched with a lighter. Now the fittings need to be twisted tightly and the turns secured with a needle and thread.
• The resulting decorative element must be glued to the braid. The necklace is ready.

Advice! You can use several decorative elements of different sizes to decorate a necklace.

Many people are accustomed to seeing such fasteners as exclusively functional fittings. But in skillful hands, such products can turn into stylish and original accessories. Needlewomen love to use metal fasteners of this type for creativity, due to their reasonable cost and variety of sizes and colors.

Good afternoon, we continue our series of articles with jewelry made from a simple sewing zipper. I already told you to you about all the splendor lightning bracelets (and showed as many as 29 models), which EVERYONE can make with their own hands - in the article. Also on our website you will find other articles dedicated to lightning jewelry.

And today we will talk about jewelry that can be hang around the neck. Lightning can be a source of amazing jewelry for the décolleté area.I selected 25 models such decorations made from lightning. And I want to not only show you photographs, but also tell you exactly how to bring this to life with your own hands.

So let's get started...

ZIPPER NECKLACES – handmade.

You can make a decoration from rings - twists from the halves of a zipper. And then glue and sew the rings to each other in artistic chaos - giving a single shape to the entire composition of the necklace. This is the easiest way.

Depending on the color and beauty of the zipper teeth, you can get a necklace for everyday wear - during the daytime.

Or a chic little thing, glittering with the gilded teeth of a zipper - for going out in the evening lights...

Lush curls of a lightning necklace.

You can wind weak turns of lightning - close them between each other - with jumpers from small pieces of lightning - as in the photo below. And then the zipper rolls can be made not into tight rolls - but as if relaxed - where each next turn of the roll is larger than the previous one.

BOW KNOT – like a decoration made of lightning.

You can create the illusion of a graceful bow... or a scarf... all this sits on glue. We give the zipper the desired free bend and place it on a drop of glue.

Even if you don’t get those knot lines and dangling graceful bow ends the first time….

So don’t get upset - even if you just tie the zipper chaotically on a tangled skein. It will still look like design concept. And your lightning decoration will look very stylish in any case (photo below)

The lightning decoration is a chaos of swirls.

You can simply lay the zipper in random curls... Lay it out first, fastening everything with pins... and then when you like the resulting shape, secure it with threads (slowly replacing the pins with hidden stitches of thread).

Of course you are interested in this moment...

WHAT KIND OF ZIPPER should be on jewelry made from a zipper?

Clasp option No. 1- It can be a simple satin ribbon (as in the photo above) - we just tie it in a knot and that’s it.

Clasp option No. 2- The clasp for such a decoration made of a zipper can be a carabiner clasp for ordinary thin straps (go to sewing stores - you will probably find suitable clasps there for your bold jewelry) - they can be very small, elegant, even decorated with rhinestones - if you look, you will definitely find the right one for you clasp.

Clasp option No. 3- In general, you can simply insert a BUTTON - an ordinary snap fastener (like on jackets) - go to the workshop where they install such buttons and ask to put a button on the ends of your jewelry. – 5 minutes for 5 rubles.

ROUND lightning necklaces.

SOFT TWISTS - LIGHTNING NECKLACES.

We take two bundles of long lightning. There are five lightning bolts in one beam and only three in the other (this can be seen in the photo). And now we begin weave from the center.

We intertwine these bundles with each other - just we throw them over each other. But we throw it so that the bend is graceful and soft - so that in the bend the jagged lines of each zipper in the bundle move slightly apart - so that each line leads its own gentle, smooth pattern.

As soon as we manage to arrange the first “intertwine” into a soft wave of a beautiful shape, we immediately fix with stitches of threads tone on tone lightning... you can a drop of glue from a glue gun (but so that the glue drop is hidden in the depths by a zipper and then does not come out).

When the first weave is fixed, we go in any direction from the center (to the right or left) and make another weave - also achieving a beautiful shape - and fix this shape with threads or glue. And so on in both directions from the center to the clasp itself.

NECKLACE - Braided from the jagged edges of a zipper.

You can buy an insane amount of zippers (in wholesale stores). Cut off the serrated part from each long zipper...(edge ​​with teeth).

And weave a crazy braid - from these cut off jagged parts of the lightning.

Schemes for weaving such braids from lightning can be seen on sites dedicated to macrame techniques or hair braiding...

NECKLACE is figured - from the jagged edges of a zipper.

And here is another technique for creating a decoration from lightning... When the jagged part is laid on a plane in symmetrical curls.

It is important here that The left side of the decoration completely coincided with the right - according to the pattern of curls...

That's why we begin to lay out the elements of the toothed tape - from the middle of the necklace– and simultaneously in both directions – an element on the left + the same element on the right. Again an element on the left + the same element on the right...

And so on until our necklace evenly reaches to the clasp... We sew and wrap pieces of curls with threads that match the color.

If you're afraid that your thread fastenings will turn out to be very sloppy - don’t worry - you can stick and sew rhinestones in these very places... And your lightning necklace will sparkle like an expensive piece of jewelry.

WHO THOUGHT to make such beauty out of lightning.

These very models of lightning jewelry - which I am telling you about now - have the same author. This is a wonderful talented woman Kate Kusack.

It is her work that inspires people all over the world to make lightning jewelry. It is from her that Hollywood stars buy necklaces and bracelets. And fashion houses are getting ideas for creating their own lines of zipper jewelry.

That's why you can BUY zipper jewelry on websites selling popular brands of custom jewelry.

WHERE CAN YOU START?

- as a trial option.

So that it’s not scary... - start with the simplest ideas... For example, like this...

You can make dragonflies with butterflies...

Then you can buy more zippers and make the thing bigger.

Jewelry made of lightning - with stone.

You can insert a beautiful stone or crystal into your necklace. You can buy them in a bead store - they sell such special large stones - they are called CABACHONS. They are designed to be woven with beads... but we will be wrapping them with zippers.

You can connect creativity - and create ALL DIFFERENT ABRACADABRA out of lightning... the main thing is that you like it...

If you are far from impulses of wild creativity and love an orderly life... then there are options for you to decorate with lightning in a restrained style.

If you like STRICT STYLE in clothes...

You can make zipper jewelry in the form of regular zip ties using fabric threaded through a zipper ring... Or in the form of a neckerchief.

You can decorate the neckline area with a simple decoration made from straight sections of a zipper.

FRINGE NECKLACE – like a lightning bolt decoration with earrings.

You can make a fringed necklace from pieces of the zipper jagged part. As in the photo below.
Or you can simply stick the same straight pieces of zipper on top of each other - the main thing is that there is symmetry - the same on the left and on the right - it also turns out very beautifully (second photo below).

Zipper DECORATION - with precious rhinestones.

And then... you can buy crystals... beautiful Czech beads, expensive Swarovski crystals... and just embroider with them ordinary lightning - and turn it into exclusive decoration with your own hands from lightning.

Jewelry made from lightning - twisted into roses...

Or wind simple rose flagella... and sew them onto a piece of thick fabric...

Next to the zipper roses, place roses made from ribbons or pieces of satin fabric... It also turns out very beautifully - and very quickly. In one evening you will become the owner of an original handmade jewelry - and then you can make such little things for sale. The costs for the material are small - the labor is also not sweatshop - and the pleasure from the process and the result are guaranteed.

Then, when your creative courage and desire for daring experiments awakens, you can buy felt and try to make something on this basis...

Then you will find out where zippers are sold wholesale - and then you will start making things with a lot of material...

Decorations made from lightning - twisted into round discs...

If you buy zippers of the same color - but WITH DIFFERENT SIZES OF TEETH - you will get a necklace like this... The rings are twisted - fixed with threads - sewn onto a base of thick felt (so that the necklace holds its shape and does not warp or bend under the weight of the metal)

Then, using the same principle, you can make a hairband for yourself or a child...

Below is the PRINCIPLE OF TWISTING A ZIPPER into an even flat disk – with fixing it as it is wound with a thread and a needle - and with sewing the finished zipper disk - onto a felt base..

Handmade LIGHTNING EARRINGS.

And of course, jewelry made from lightning requires some additions - if you are wearing a bracelet or necklace, your ears also require jewelry in a similar style

Here are some lightning earrings you can make with your own hands. Zippers also made from jagged tape.

You can simply tie the scalloped ribbon cut from the zipper into elegant knots and loops.

You can twist a toothed zipper into a flat disk...

You can design the jagged tape in the form of droplets...

And by the way... if we make drop earrings from a lightning bolt with a bead. Then you can try to make a necklace in the same style. For example, THIS IS THE SCHEME (like the photo of the jewelry below).

You can make earrings in the shape of roses...

You can make earrings simply from strips of the jagged part.

You can find them on sale... or make them yourself... these are the carnations.

You can simply glue the zipper catch onto a nail with glue.

And add such dogs with a hanging crystal... Or stick rhinestones on them..

You can even make snake rings like this. It's very simple. If for regular thin hoop earrings string a narrow zipper tape.

Here are some ideas for your creative desires...

Turn on the internal ignition... remove the brake pads of uncertainty... and start a new life with lightning jewelry - made by your own hands.

And also...

We also have other articles.

If you liked my selection of ideas for bracelets, necklaces and brooches…. Respond in the comments... And then I will send you a surprise gift by email - with another idea that I didn’t talk about here...)))

We wish you sparkling ideas and luxurious crafts.

Olga Klishevskaya, especially for the site