How to make a swing with your own hands from wood. Do-it-yourself wooden swing: types and materials, drawings with dimensions, photos and videos

(18 ratings, average: 4,00 out of 5)

Nursery garden swing in the country is a casual game, great leisure and fun. There is always a lot of children's laughter and joy near them. By installing them at their summer cottage, you can get another place for a pleasant pastime. By following the simple rules for creating design and safety, you can make a children's swing for a summer residence with your own hands.

In order to get it right calculate the possibilities and forces, you must first determine the preferences of family members and get acquainted with the manufacturing options (photos and drawings of a garden swing can help with this). Some prefer to lie languidly with a book or tablet, and some need to sway with a whistle in their ears.

Types of homemade swing

Swing garden wooden are divided into several main groups:

• balancing or sofa swing for giving. This type of swing for two;
• hanging swings on chains, cables or ropes, like a "bungee";
• a swing made of logs that are on stationary supports (classic look).

Each model can beat like this that the household will choose her favorite corner of the garden or cottage, and all the neighbors will begin to envy.

Where to install?

When the choice made in favor of the "bungee", then the answer to the question is obvious - we install it on the nearest tree, which inspires confidence in terms of strength. And when choosing a place for other types of swings for giving, it is necessary to take into account such factors:

• illumination. The best thing, so that the sun's rays got to the site until the evening. Thus, a garden swing made of wood will be insured against dampness;
• sufficient distance from fences, walls, wires, trees, pointed objects and thorny bushes;
• the site should not blown by all the winds". Constant drafts are fraught with colds;
• it is advisable to immediately select a smooth surface relief so that there is no need to perform additional work.

Great when under construction soft grass or sand. This will make it possible during the fall not to get injured on the reinforcement or stone.

Gallery: do-it-yourself garden swing (25 photos)

Drawings of a swing for a summer residence

You can do without them. However, when a serious project is meant with a claim for long-term operation, then for reasons of saving building materials, it is advisable to prepare a drawing of a swing . design a wooden swing with your own hands it will not be difficult when there is at least a slight experience of such work.

General provisions that display the drawings of a children's garden wooden swing:

• sizes. That is, the area of ​​the base and the height;
• frame structure;
• type of suspensions and their length;
• number and type of seats;
• it is necessary to note the places of reinforcing elements and fasteners.

Material for manufacturing

Whatever type of swing is chosen, it is necessary draw a lot of attention on the quality of the material (directly on the tree) from which the structure will be built. A high-quality tree can not only ensure the durability of the structure, but, most importantly, guarantee the safety of operation.

The following species showed themselves well: larch, oak and cedar. Also, wooden swings are often made of birch, pine and spruce.

wood must be purchased dry, without foci of decay or traces of mold. There should be no holes made by pests, crevices, falling knots. The construction of a do-it-yourself swing made of wood does not require a large amount, so you can check each beam and board.

Tools

Before you make a swing in the country with your own hands, you need to make sure that you have all the tools required for this.

You will need:

it basic tools. When everything is prepared (project, drawings and material), we begin to build a garden swing in the country with our own hands.

In this case, the main difficulty is what to hang on. When you have a suitable tree growing, it is advisable to make the crossbar from a log (about 25 cm in diameter and 3 meters long), fixing it with ropes. A strong branch at the required height will relieve the need for this design.. When not in the country find a suitable tree, then, in addition to the supporting beam, two logs (30-40 mm in diameter) will also be needed to assemble the U-shaped frame.

Pre-logs need treat with an antiseptic and sanded, then they are placed in prepared pits (50 cm) with crushed stone at the bottom and filled with cement mortar. When pouring cement is not planned, then the logs will need to be dug to a depth of at least a meter.

During the installation of the frame, the most important thing is to prevent distortion. There is an interesting option to adjust the level correctly: the Egyptian plumb line. D this system is quite is simple: the upper load is a nut or any curved piece of iron, and the lower one is a small container of sand.

As for the seat, there are many variations for every budget and taste:

• from the board (with and without a back, on two suspensions or on one central one);
• from a log (of one thick diameter or 2-3 thin ones, which are connected to each other with fasteners or a rope);
• from a tire (solid or cut, horizontal or vertical arrangement).

To the choice of material for suspension, with which we will hang a bungee on fastening, it is necessary to treat responsibly. Cables, ropes or ropes must be reliable, best of all new, and not rotten from attic stocks. It is not recommended to use chains in this case, as the child can easily pinch his fingers in them.

Suspensions during fastening on a carrier beam must be no closer than 1.5 m from each other. You can secure them with leather-wrapped loops or hooks. You can also use special steel fasteners - thimbles. The most durable fastener is a carabiner with a collar. However, safety teeth must be on the carabiner, otherwise it may move during strong swinging.

Usually , frame swing for summer cottages they have a fixed solid base, for example, a sofa or a bench. This is a more permanent structure, unlike rope structures. Most often, this building is installed not only for children, but also great for relaxing with the whole family. Construction options will depend from selected material.

Log swing

Today swings made of logs are quite relevant. Though they look bulky but reliable and original. The seat can be hung on L-shaped, U-shaped and X- or A-shaped frames.

At the same time, X-shaped frames are the easiest to make: on the logs fixed with a “cross” (about 12-15 cm in diameter and 2.5-2.8 m long), a load-bearing beam is superimposed on top. The cross begins approximately 45-60 cm from the ends of the logs. For fixing, threaded spokes (15 mm) are best suited, which are fixed with nuts on both sides after installation.

The lower ends of the supports are cut inward at an angle of 45 degrees. Then, on each cross, it is necessary to fix the ties in the form of bars of small thickness measuring 2-2.5 m at a level of 35-50 cm from the lower ends.

We install both crosspieces and fasten the third tightening log between them at the same height as the first two, and also fasten the supporting beam in the upper grooves. The frame of the swing is assembled from logs. Now you just need to hang a sofa or put together a bench. The simplest seat can be easily built on a 6x8 cm timber frame, which is then sheathed with a 4 cm thick board. The parameters of the bench-sofa are as follows:

• back height 70 cm;
• bench depth 60 cm;
• length 180 cm.

As suspensions, you can use strong ropes, cables, ropes, chains. They are attached to the bench with carbines or knots. But for fastening to the cross beam, two eye nuts and two large bolts will be needed.

Hanger installation steps:

• In the places where the hangers are fastened in the carrier beam, two holes are made through from top to bottom.
• Bolts are inserted here, eye nuts are screwed in below.
• Carabiners or ropes are inserted into the rings of the eye nuts.

Near a large bench, as a combined option, you can fix a single bungee for children on a long supporting beam.

This is a fairly convenient material for assembly, therefore it is not difficult to build a wooden swing from a bar in the garden with your own hands, however, the skill does not hurt.

To assemble a swing from a bar with your own hands, the following material will be needed:

• for tightening the crosses, one edged board 4x12x70 cm;
• for the crossbar one bar 10x10 cm long 2.7 m;
• for side supports, four bars 12x12 cm, 3.2 m long;
• for a bench: approximately 15 linear meters of a bar measuring 4.6x5.5 cm, for sheathing 20 linear meters of a board 2.5x4.5 cm, as well as fasteners and suspensions.

First of all, we collect the crosses. This is done in the same order as according to the principle for a wooden garden swing made of logs: mark, cut, connect, hang a chair or bench.

On a swing made of timber, the crate of the crosses of their thin rails looks great, where you can attach flower pots. A light roof would also be quite appropriate. A very interesting option is when the roof is made of a "house", as over the wells in the village. If you apply maximum imagination, then this "harbor" in the garden will become a favorite place for family holidays. Especially with soft pads on the bench.

wooden pallet

Probably, many could see latticed wooden coasters for various goods in warehouses and stores. Often, after the importation of goods, they remain in summer cottages. However, the idea to build a garden swing out of it with your own hands can only come to a person with a remarkable imagination. The most important thing is that the pallet is not rotten and strong. It must immediately be treated with water-repellent and antimicrobial compounds, painted and dried.

So, here is another idea on how to make a garden swing for a summer residence with your own hands, and very quickly. A cable, rope, rope or chain is fixed on 4 sides of the pallet and hung on any frame or support. Thus, it is possible to make either a luxurious seat, on which two children can comfortably accommodate and swing together from two sides. Or, by laying a pillow and a mattress on it, we get practically a cradle.

When the farm has two pallets, then by fixing them with corners, you can build a bench that will look great on any frame base.

Balancer or swing scales

Once upon a time, such entertainment for two was a mandatory attribute on playgrounds. Which were willingly ridden not only by children, but also by older romantic people. On the garden plot, these swings will certainly come in handy.

When everything is relatively clear with hanging structures, then how to make a wooden balancing swing with your own hands to give? These swings can be made from boards, bars and logs.

For the simplest classic option, you will need:

• metal or wooden pin;
• a piece of thick saw cut or log;
• two handles;
• two beams measuring 30x30 cm;
• a board not less than 4 cm thick and about 2.5 m long.

So, the construction process is quite simple:

• Lay the log on its side.
• We fasten it on the sides with bars so that it does not roll on the ground.
• Having found the center, we fasten the pin.
• We put a board with fixed handles on the pin.

And now another garden wooden swing is ready.

How to care for a swing made of wood?

• From the end to the beginning of the new season, you need to cover the structures with waterproof material.
• Annual painting or treatment with special compounds will save the swing from pests and decay.
• Do not create disproportionate loads.
• Avoid rust on metal parts.

Garden wooden swing is a great way to relax in the country. It is even more pleasant if they are made by hand. Their construction does not take a lot of time, but you can literally enjoy the result every day!

It so happened that for many of us, a swing is associated with childhood or a wedding, but not necessarily perceived as an indispensable element of the garden. At the same time, many readers of our blog will certainly be interested in learning how to make a swing, so undeservedly forgotten, and moreover, purely with their own hands. They can be done in a rustic style, using metal or wood, as a seating area for an Italian patio, under a pergola or a children's version of a swing - one of these is sure to please.

Swings as an item of homestead exterior are not so often found in the dachas and near the country houses of our compatriots. We propose to radically change this situation. We will talk about the independent production of garden decor due to the need for a rational approach to spending.

Probably not worth mentioning that such exterior items are quite expensive on sale. The cost of wooden models in Europe reaches 700-900 euros. In Russia, prices start from 200-300 dollars. It's not that hard to make them. Gardening and outdoor work is a rewarding hobby in every way.

Traditional English swing benches

Swing benches belong to the traditional decoration of the terrace of a classic English house. Such a tradition also existed in Tsarist Russia, swings were built on verandas and terraces, as a rule, under an existing canopy. Fastening to the roof beams provided the required reliability without unnecessary investments.

You can make a swing from any material available in the country for your terrace completely with your own hands and without the involvement of assistants. To do this, you do not have to make a base and a canopy, but only build a secure mount to the ceiling and make seats. A woman can also cope with such work, only you need to make sure that the roofing is reliable so that the work is not only easy, but also of high quality.

In American cottages, such models in the form of benches with textile cushions are found on an open terrace. In Italian Tuscany, hanging wooden seats are very often arranged under a flower shed - a pergola, which vaguely resembles a Russian gazebo and often serves as a summer kitchen.

Swing-bed or swing-bed

Swing-bed is an alternative form of larger deck swing. A similar rocking bed can be built in the garden, under a canopy, tree canopy or awning. If you add a canopy to the design, then in the summer you can sleep freely on such a swing, enjoying the pleasant coolness of the night. Use one of the ideas presented in the photo.

Photo, design and drawings of a swing bench for a terrace and a garden

Pergola as a supporting structure

Free-standing A-shaped structures without canopy

Free-standing A-shaped structures with a canopy (diagram and drawing)

Ways of fastening the elements of the supporting structure of the swing

Swing in rustic style for wooden manors

If you are a happy owner of a Russian wooden house built from timber, be sure to appreciate the rustic-style swing. The GardenLand.ro company offers its author's models worth about 900 euros. A similar garden decor is made in Russia by the Eclectichome.ru family workshop using natural materials.

A wild log is used as a building material in the construction of such a swing. During processing, the branches are cut off and used as brackets for flower stands. We suggest you evaluate your strengths and build such a decor yourself. How to make a swing in the garden at the dacha from improvised materials and do-it-yourself photos, we suggest looking below.

Installation of rustic swings is carried out individually without drawings, using the standard dimensions of such backyard structures as a basis. It is not at all necessary to remove the bark from the support, as is done in the GardenLand sample. But if you decide to create an author's swing pattern, you will need a specialized tool for Russian log cabins.

Coating the wood base with protective agents will help preserve the look of the wood. Specialized paints and varnishes are available in a wide range, most often budgetary linen impregnation is used by craftsmen.

Anchor bolts and fixing accessories for roof construction are used to fasten individual elements of the swing. We talked about a similar installation in a review about wooden stairs.

The main advantage of wild log swings is their stability and high strength. The design freely supports the weight of several adults. You can see how the installation of such a rustic decor is done in the video.

French textile armchairs or Brazilian Hammock

The French swing originates from the traditional Brazilian Hammock hammocks and is usually made of thick linen or tarpaulin, fittings and a thick linen cord. The shape of the chair is attached with the help of laces of different lengths. They are attached to a transverse wooden beam, which, in turn, to a reliable overlap of a terrace or pergola. To create the base of the seat, pillows that hold the shape are laid.

See how to make a swing in the form of hanging chairs, benches and benches with your own hands photo. Such a functional decor for pergolas and terraces will become a favorite entertainment for adults and children.

Textile chairs can also be used without a canopy, for this purpose we recommend making a hook on the anchor bolt, to which they will be attached as needed. For quiet purposes, portable terrace swings can be used, which in good weather can be installed outdoors without a canopy. With a sufficiently reliable basis, this can also apply to different variations of the swing-bed.

Playgrounds in the backyard with swings

Children's swings can have different designs and are arranged anywhere in the garden where the child will play or be near their parents. Make small rocking chairs for a small child on the terrace. Moreover, it is possible to fasten the floor with a hook in advance, so that at any time it can be replaced with any other suspended structure.

Always keep in mind that older children like to swing the structure a lot, which should be considered when choosing hangers and bases. If floors cannot withstand such a force, use a more suitable model.

Video instruction for the construction of a wooden swing

Conclusion

All the proposed swing models can be made with your own hands, and in some cases from improvised material at no cost. The photo shows various designs that are quite simple to self-assemble. Ideas can be applied to decorate a recreation area in a personal plot or make your own playground for children.

One of the favorite children's games is to swing on a swing. There are swings in almost every yard in the city. However, in summer, children often go to their grandparents in the village or take them with them to the country. To diversify the rest of your child, you can make a children's swing for a summer residence with your own hands. You will find instructions, photos and diagrams in this article.

Swings can have a different design: from the simplest "bungee" to a large swing, on which you can even lie. Next will be described the designs of the swing, which you can do yourself, in order of increasing complexity.

Garden swings are very popular in the country

The simplest swing, familiar to most, is a bungee. It is a strong stick tied on a rope (rope, chain) to a tree. The bungee is made extremely simply: a strong stick about half a meter long is selected (you can saw off part of the handle for a shovel, rake, etc.), a rope is tied to its middle, the other end of which is attached to a thick tree branch. It is best to use the so-called scaffold nodes - they tighten themselves and hold the load well. A child can make such a swing on their own. The bungee can be upgraded by taking a sturdy plank instead of a stick, drilling through the center and threading the rope through the hole, then knot it.

The simplest bungee can be made from a rope and a stick.

Slightly different from the bungee is another projectile - a trapezoid. The trapezoid is the same stick, but the rope is tied to it not in the middle, but from both edges. The rope can be solid, but you can use two - the same length. If one solid rope is used, it can be fixed on a branch with an ordinary loop (photo 1).

Useful advice. It is better to choose a stick with a significant margin of safety. Firstly, increased strength guarantees the safety of the swing, and secondly, then small grooves can be machined on a stick at the attachment points of the ropes so that they do not slip off - this also increases safety.

The cable tarznaki can be fixed between two supports

The simplest swing

The simplest swing can also be hung on a thick branch, but it is better to make a crossbar with supports for this. The design of the supports will be described at the end of this article.

A simple rocker with a soft seat

The seat is a square or rectangular board suspended at four corners. You can use plywood. Not far from the corners, four holes are drilled in the seat, into which a rope or eye is passed (the eye has a ring instead of a head); if the eye is not used, then the rope can be passed through the hole and tied in a knot (its thickness should be equal to the diameter of the hole), thus securing the board on it. If an eye is used, instead of a rope, a chain can be taken, which is attached to the eye with a carabiner.

A backrest made of the same plywood can be attached to the seat on metal corners. Another version of the backrest (suitable for small children) is shown in photo 2. Tubes made of wood up to 30-40 cm long (the same length!) are put on the ropes, after which a crossbar stick with drilled holes along the edges is put on for every two adjacent ropes. This design, despite the ease of manufacture, is quite convenient, safe and will serve for a long time.

Note. Instead of putting on wooden tubes (not everyone can make them!) You can tie knots on ropes at an equal distance from the seat. Then the crossbars will be held with knots, not tubes. It does not look as aesthetically pleasing, but it is easier to manufacture.

Useful advice. In the manufacture of any wooden parts of the swing, it is necessary to clean them with sandpaper or a file - this will protect your children from splinters and give a more aesthetic appearance to the product. In order for the swing to serve for a long time, they need to be varnished or painted to protect against dampness.

Swing from wooden pallets (pallets)

To wooden pallets, a chain or rope is also fixed at four corners. The advantage of pallets lies in their large size and strength: on wide pallets it is convenient to swing while standing, or you can put a mattress and swing lying down. Pallets can be connected to form large structures.

Swing seat made of wooden pallets (pallets)

Tire swing

Car tires are strong enough, but cut well. The most primitive use of a tire is similar to a bungee: the tire in a vertical position is tied to a branch with a rope, you can sit in such a swing. But such a seat is not very comfortable, and its appearance is not aesthetic. This is not yet a reason to refuse the use of tires.

A swing from a tire tied horizontally on three or four chains looks much better. Four or three holes are drilled in the tire at an equal distance from each other, into each of which an eye is inserted and fastened with a nut. It is useful to lay wide washers between the eye and the seat (and between the nut and the seat). Ropes (or chains) are brought together to support at one point on a steel ring.

The strip cut off from the tire is used instead of the board, as described above. In this case, “ears” are attached to the edges of the tire strip, for which the rope is held or a carabiner is hooked with a chain.

From tires you can make a variety of shapes for a swing

Fabric swing on a metal frame

The swing seat can be made from a metal frame with a strong fabric stretched over it (for example, a tarpaulin). Rope weaving can be used instead of fabric. An example is a hoop swing.

A swing from a hoop resembles a hammock: a wide and strong hoop is tied to three or four ropes, from which thin ropes go to the center, woven with macrame technique into some kind of cobweb. The weaving scheme can be different, the main idea is that the weaving can withstand the weight of your child. The hoop is usually wrapped in foam rubber and fabric, or braided with twine so as not to injure the child with a possible impact and for greater comfort. Instead of macrame, you can pull a tarpaulin over the hoop, as noted above.

Swing supports. Fastening the swing to the supports

Supports (goats) are made of three bars, logs, boards or metal and look like the letter A: their lower ends are placed in specially dug holes and buried or concreted. The crossbar, even for a children's swing, is best made from a metal pipe. In the absence of a pipe, a beam is placed on the goats - a thick beam or a rounded log. The structure must be strong and not wobble. Steel supports are assembled using welding, and wooden ones are connected with screws, anchors, self-tapping screws and metal corners.

If the seat is suspended from a metal bar, it is good to use rings - plastic, metal or wooden. The latter can be carved from wood yourself. If you tie a rope to a tube without rings, the rope may fray. Then it is necessary to check its strength regularly. If there are rings, then it is better to lubricate the contact points of the rings and the crossbar.

If the swing is suspended from a log or beam, then rings are not needed: the rope will not slide on the tree due to strong friction. Both ropes and chains can also be attached to eyelets (or hooks) firmly screwed into a beam or log. Wooden structural elements must be varnished or painted to protect them from moisture.

Instead of a wooden beam with eyelets, steel beams with rings welded to them can be used. On a wooden beam, the frames can be replaced with clamps on which to hang carabiners. Chains can also be attached to vertical posts on anchors with wide washers. In this case, the beam is needed only to give the structure stability and rigidity.

Baby cribs can be attached with chains

Chains can be fastened not individually, but connected in rings: the left chains are attached to one, the right ones to the other. Rings are also hung on carabiners to eyelets, on hooks, clamps, or welded to a metal crossbar.

Children's rope swings are not so reliable

Let's dwell on two more types of swings.

rocking chairs

A rocking chair can replace a swing for a child. The advantages of a rocking chair include safety for the swinger (there is no risk of a rope breaking) and mobility (you can bring it into the house, you can take it out into the street); the disadvantages are the relative complexity of manufacturing and the fact that such a chair can crush the leg of the person standing next to it. A kind of rocking chair can be considered wooden rocking horses. The main difficulty in the manufacture of rocking chairs is the manufacture of rounded skids; for a children's rocking chair, they can be cut out of thick plywood.

Rocking chairs are safe and suitable even for the smallest

Horse - rocking chair made of solid wood

To make skids, you need to draw their contours on a sheet of plywood and carefully cut them with a jigsaw, then clean them with a file and sandpaper. A seat made of plywood or chipboard (plywood is stronger and lighter) is attached between the runners to metal corners. It is necessary to work very carefully so that the rocking chair does not turn out to be a curve.

A floor rocking chair for kids can also be made from thick cardboard.

Swing-balancer (English seesaw).

The swing-balancer is a long crossbar-board, at the ends of which seats are made. At least two people can swing on such a swing. The simplest version of the swing-balancer is done like this:

1. A long (2.5 - 3 m) strong board or timber is selected, cleaned and sanded.
2. Handles are screwed on each side about half a meter from the edge. To do this, on both sides of the beam, it is attached along the plank, to which the crossbar is then attached (photo 5).
3. Plywood or board seats are screwed or nailed on both sides, it is advisable to attach pads so that the seats are soft.
4. A thick, strong pillar about a meter long is dug into the ground to a depth of half a meter (or concreted).
5. A hinge is screwed or nailed to the middle of the beam, which is then attached to the buried pole.

Another option is also possible, when skids are cut out of thick plywood, as for a rocking chair, and attached to the middle of the timber. Then the swing becomes portable and can be used indoors.

Scheme for making a swing - a balance beam for children

Safety

When making a swing, remember: negligence in work can result in injury. Be sure to choose strong chains and ropes, check the stability of structures. It is better to spend more time and money and make the swing stronger than necessary than to become the culprit of a spoiled vacation due to an error in calculations, and worse, a serious injury to your own child.

There is another interesting type of swing - a grasshopper swing. Grasshopper Swing Diagram

Do-it-yourself swing for a summer residence

42 photos:

Building a swing with your own hands will allow you to create a universal relaxing tool and provide a good rest in the country or in a country house.

The presence of free space in a summer cottage or personal plot gives a lot of advantages. Some prefer to set up a garden in its place and enjoy the beneficial properties of vegetables grown by their own hands. Others prefer to equip it as a recreation area by building a garden shed and ennobling it. All of these options have their advantages and are safely used to fill the site. In turn, the creation of a comfortable and practical place for outdoor recreation allows not only to optimize the territory, but also enables a person to isolate himself from everyday bustle.

Varieties of swing

Garden or country swings create additional comfort on the site. At the same time, such a device will appeal to absolutely everyone, from small children to adults. For children, it is entertainment that can brighten up their leisure time. In turn, they bring relaxation and comfort to adults, which is extremely important in today's fast and ever-rushing world.

Similar products can be purchased ready-made in almost any building supermarket or ordered online. Having made a purchase in this way, all that remains is to install the structure, and even then some organizations offer to do it on their own. Such a solution makes it possible to obtain a full-fledged outdoor swing in the shortest possible time, but it also requires large material costs, which is far from always relevant in today's realities.

An alternative to a similar solution is the construction of a swing with your own hands, which allows you not only to save a significant part of the material resources, but also makes it possible to independently choose the shape and design of the future building. As a rule, such systems are made of two types of materials that are inevitably available in a personal or summer cottage. These means are wood, metal or their combination. In most cases, it is with the help of these materials that garden swings are erected.

It should be taken into account that modern swings for your own garden can have very different shapes and sizes, since the main criterion for their creation is your own imagination. This gives room for experimentation and sometimes leads to the formation of completely unprecedented forms. What are the sofa swings that are rapidly gaining popularity these days. In general, the following options for country swings are in the greatest demand in the modern world:

• traditional;
• nest swing;
• cocoon swing.

At the same time, the most popular is still the traditional version, the creation of which with our own hands we will consider further.

Do-it-yourself swing: stages of work

As mentioned above, most often do-it-yourself swings are made using wood or metal, since these materials are the most affordable and inexpensive. In addition, they guarantee an optimal product, which will be characterized by increased durability and comfort. To impart these qualities to the future design, one should take the development of the project and its subsequent implementation with great responsibility. In general, do-it-yourself hanging swings should be performed on the basis of the following scheme, which most fully and in detail describes the entire procedure for carrying out the work. It consists of the following steps:

• preparatory work;
• drawing up a principal plan;
• collection of tools;
• installation of racks and crossbars;
• creating a seat;
• final assembly of the structure.

Building a swing in your own garden on the basis of the above plan makes it possible to significantly save work time and at the same time get an excellent result. At the same time, the creation of similar structures with your own hands will be impossible without the skills to work with tools and a clear understanding of the purpose of each process. It follows that before starting the construction of a swing, it is necessary to decide on their final design and application. This is the only way to be sure of the reliability of the future product and its practicality.

Preparatory work

How to make a swing in the garden? Initially, before carrying out the work itself, it is necessary to prepare. You should choose a place where the structure will be installed and create optimal conditions for its construction. At the same time, determining the place of construction of the building plays a huge role, allowing you to obtain additional characteristics of comfort on the site. So, building away from the recreation area is unlikely to create the best ratio of comfort and practicality on the site. Therefore, the swing area should be located in close proximity to the canopy or even installed directly under it. After determining the location, it is necessary to prepare the site for work, which requires the following actions - cleaning the territory, leveling the surface and eliminating its defects.

As soon as this stage is completed, you can proceed to the next stage, which is to display the basic plan of construction. It can be based both on the compilation of a detailed visual model of the system, and represent an ordinary planogram. In general, do-it-yourself drawings are quite simple to create. Their main criterion is the choice of the correct aspect ratio and dimensions of the main parts. Also, this stage includes the choice of material for the construction of the structure, which can be timber or metal pipes. In our case, the optimal solution would be to use a tree, so we will focus on it.

Wooden swings and their creation require the use of a fairly wide list of tools.

This aspect is due to different types of work and a large number of processes to be done. So, to build a swing with our own hands, we need the following set of tools:

• shovel;
• Master OK;
• bucket;
• hacksaw;
• roulette;
• pencil;
• a hammer;
• screwdriver;
• drill;
• a set of keys;
• plumb;
• level.

As you can see, the above list is quite large, which causes the complexity of the upcoming work. At the same time, the collection of all the necessary equipment makes it possible to significantly reduce the total time for the construction of the object, so that the construction will be faster and more productive.

Installation of support legs and creation of a seat

Having finished the preparatory part, you can build a swing from a bar. To do this, it is necessary to dig four holes, in which support posts will subsequently be installed to ensure the stability of the system. There should be at least four of them - two on each side. In this case, the distance between them is determined by the height of the support and the size of the log swing as a whole. The same applies to the number of supporting elements. So, large and massive structures, involving the creation of several places for skiing, require additional reinforcement, which is carried out by installing auxiliary support elements. As a rule, they are installed between the seats to provide optimal conditions for its movement.

In the process of creating a swing from a bar, wooden racks are poured with concrete in the shape of the letter "L", which provides them with additional reliability and stability. In addition, several transverse strips are fixed between them, providing an astringent function. As a rule, they are fixed in two or three places on the surface of the racks. At the same time, the poured supports must stand for several days so that the solution is completely dry and becomes monolithic. It should also be noted that in hot weather it must be periodically watered to prevent cracks and chips from appearing on it.

While the supports are hardening, you can proceed to the creation of the seat itself. Do-it-yourself wooden swings for summer cottages may involve the use of a variety of seat models. Recently, varieties such as a cocoon or a nest have gained particular popularity, allowing you to get a lot of positive emotions from the rocking process. However, their application is not as versatile as using a traditional seat, which is suitable for absolutely everyone, from the smallest to the elderly.

Therefore, our swing made of wood will be equipped with a similar kind of seat. To create it, you can use a variety of available tools available: old pallets or boxes. If there are no such materials at hand, then the seat itself must be made independently. In its structure, it resembles an ordinary box, in which one side is missing, and such a model is assembled quite simply - with the help of self-tapping screws and wooden planks.

Assembly and processing of the structure

When the supporting parts are completely settled, and the seat is ready, you can proceed to the last stage of building a swing in the country. It consists in the final assembly of all elements and the formation of a monolithic structure. It is necessary to start assembling a wooden swing with the installation of a longitudinal beam, which lies on the racks with its ends, as a result of which a crossbar is formed. It is on it that the seat itself will be fixed. For greater reliability, the beam itself is fixed with fasteners, ensuring its immobility and strength.

• rope;
• chains;
• pipes.

Most often, do-it-yourself wooden garden swings are created on ropes, cables or chains. At the same time, chains are distinguished by good performance, since they are the most durable and reliable products. Based on this, fastening for a swing in the garden is best done using metal chains. To do this, they must be fixed on the one hand on the surface of the crossbar, and on the other directly on the seat. As a rule, for maximum safety and practicality, the seat is fixed in four places using separate parts of the chain. Each of them is screwed to the wooden seat base with metal bolts, and its ends are assembled in twos and also fixed, but already on the surface of the crossbar.

In this embodiment, the swing is completely ready and can be used for its intended purpose. However, the appearance in this design leaves much to be desired, so they need to be decorated. To solve this problem, you can use a variety of varnishes and paints, which will not only make the swing more colorful, but also significantly increase the service life. Thanks to such fairly simple manipulations, for many years to come she will be able to bring joy to all people who have a rest in their summer cottage or garden plot.

Photo gallery

We bring to your attention original photo ideas for decorating a garden swing.

Dachas today have ceased to be exclusively garden objects. They are increasingly purchased for a pleasant pastime. This gave rise to a new vision of the design of their territory.

Types of swing

Structural diversity

Garden swing for the whole family

What can you make a swing with your own hands

Where to put a swing in the country

Swing as a stylish addition to a stylish landscape

A few ideas on how to make a swing with your own hands

Swing in the country: features of care

Conclusion

Photo gallery - country swing

Much attention is now paid not only to the construction of comfortable houses, but also to the arrangement of relaxation areas. Along with the installation of gazebos, pergolas, patios, such a move as making a swing with your own hands will work great. This is the easiest way to diversify your vacation and bring lightness and fun to the environment. What they will be - free-standing structures or part of a relaxation complex - you decide for yourself.

wooden swing in a secluded corner of the garden overlooking the pool

You should not consider this element as purely child's play. Believe me, all households will like such entertainment in a modern interpretation and will definitely not stand idle, so let's figure out how to make a swing in the country a worthy decoration of landscape design.

Structures can be classified according to many parameters. The assortment list includes children's swings for the street and models for adults. The improvisation of the division should be started with the rocking method, and it can be:

• vertical;
• horizontal.

swing sofa for the whole family

In the first case, the swing is in the form of a long crossbar with a reference point located in the middle. The principle of their action is a counterbalance. It is necessary to swing on a horizontal swing in two, and it is desirable that the weight of those sitting opposite is approximately the same. Basically, this is a solution for playgrounds, but if you wish, you can increase the dimensions and strength of the structures so that older households can have fun on them, you just have to make adult swings with your own hands. It is unlikely that they will be found ready-made.

a simple hanging swing for two

With a vertical suspension of the seat, it will be possible to swing on a swing on an individual basis. The horizontal range of motion during swinging is typical for most swing models. This is how the bungee works, and a solid structure with architectural forms and soft seats.

Structural diversity

original metal swing spherical shape

Hanging swings for summer cottages are always popular and the reason for this is the simplicity of the design. In fact, this is a seat suspended from any crossbar. The role of the bearing support is often performed by tree branches. For greater safety, it is better to use not a standard weaving rope, but more powerful cables as suspensions. A budget option that allows you to build a swing in the country with your own hands, even for those who do not have experience in such matters.

swing with soft mattress and pouffes

Frame structures are more difficult for independent execution, however, they are also more reliable in use. The crossbar carrying the seat, in this case, is laid on strong and securely fixed supports. The seat also rests not on cables, but on metal rods or chains.

metal swing chair on the veranda of the cottage

In a separate category, children's swings for the spring-type street should be singled out. These are always bright structures with comfortable soft seats that imitate the appearance of cars, trains, airplanes or animals. The rocking mechanism in them is a powerful spring, securely embedded in the support. The swing is equipped with handles and straps, which ensure the safety of operation. Since such models are designed for the smallest summer residents, their use should take place exclusively in the presence of adults.

wooden swing with a comfortable soft seat for one person

Whether to make a spring summer swing with your own hands or purchase ready-made structures via the Internet is a rhetorical question, and the answer to it depends solely on your ability to solve engineering and technical problems.

Garden swing for the whole family

"Swings in the country can be installed permanently or use their mobile versions"

If there are no very young children in the house, or a separate playground is provided for them, it makes sense to think about using it in the country landscape:

• sofa swing;
• swing-chaise lounge;
• hammock swing.

spacious backless swing for several people

Swing sofas

In most cases, these are mobile structures, characterized by increased comfort and ease of installation. The shape of the seat is similar to the design of the sofa, that is, it has a back, soft pillows. In some models, the seat is transformed into a full bed. Such a swing for a summer residence is designed for long-term operation. In the store version, they are most often found in a metal version. If you want to have something more original in the landscape of your site, you can assemble a similar country swing with your own hands from wood.

swing sofa goes well with furniture on the veranda

Swing chairs

Two people can easily sit on the seat of such a swing. These are durable products constructed from a special alloy, most often of a mobile type, which allows them to be transferred to any summer cottage and even to a veranda or house.

portable swing chaise longue will become a favorite place of leisure in the country

Swing-hammocks

It can be both a hanging swing for a summer residence, and frame structures. In the first case, the canvas of the hammock is shaped like a seat and hung on a cable or chain on strong branches. For greater comfort, such a seat can be laid out with pillows.

the convenience of this model lies in the fact that it can be installed on the crossbar of the veranda or on a branch of a shady tree

In frame models, the hammock is fixed to the supports and can be hidden under an awning or plastic roof. In expensive types of swing-hammocks, a mattress is provided.

Swings in the country can be installed permanently or use their mobile versions. In the first case, you need to successfully choose a place for their location, since it will not be possible to rearrange the accessory with a slight movement of the hand.

wooden swing for two in the form of a rocking chair with a stand for glasses

What can you make a swing with your own hands

When arranging places for leisure activities, take care of the appearance of comfortable and practical swings in them. Do not rush to go to the store for them. Try to make a country swing with your own hands. Of what? From whatever comes to hand. And what is always found in the summer cottage?

Rope

This is the main structural element of the famous "bungee", capable of causing screams of delight not only among children, but also among very respectable adult uncles, risking a ride on it. Most often, it is placed above water bodies and at the same time endowed with the function of a kind of springboard for jumping into the water.

swing from a rope and a log

It is not difficult to build a rope option. All that is required is to find a stronger branch and tie one end of the rope to it. On the other hand, a thick knot is tied or a polished log of small thickness is tied, which will be pleasant and convenient to grab with your hands.

Wood

This is a material from which you can make less frivolous swings in the country with your own hands. Wooden structures should have a comfortable seat. The advantages of this option include the environmental friendliness of the product. The wooden model will simply fit into any garden landscape, regardless of its stylistic decision.

even a beginner in carpentry can make such a children's swing

Wood is not a very difficult material to work with, so even beginners in carpentry can use it to create a swing. How to make a swing to the country house of wood, we will tell you a little lower, but for now let's digress to its shortcomings.

Despite the fact that the material is considered durable, it is not durable and reacts poorly to moisture, cold, and sunlight. You can extend the life of a wooden swing only by treating it with protective compounds, which, fortunately, are in abundance today.

Metal

Only a select few can make a swing with their own hands from metal, that is, those who have experience with welding or know blacksmithing. Of course, metal models are the most durable and rational for outdoor use. They can be made:

1. Collapsible.
2. Mobile.
3. Stationary.

glass swing should be installed in a shady place

According to the method of production, they are also divided into:

• welded;
• forged.

The hand-forged swing sets off a luxurious and rich exterior. Openwork elements give the country swing uniqueness and make it a stylish addition to landscape design. If you need an eternal swing in the country - make it out of metal.

Naturally, the metal surface of the frame will also have to be protected with a special coating (provided that you have not welded a stainless steel swing), which can be attributed to the disadvantages of the material. But by and large, the lack of metal structures is only one and that relative. It's about their bulk. Heavy weight complicates the task of moving mobile and collapsible options.

Plastic

basket swing

If you don’t know how to make a children’s swing for the street, pay attention to durable polymers. Perhaps the seat will have to be bought, or perhaps something suitable for this role will be found in the bins of the barn.

The easiest way to build a hanging children's swing. For this option, it will be enough to pass through the holes or thread the rope into the grooves and adapt the entire structure to a tree or other type of support. For kids, it is still more rational to purchase ready-made swings made of plastic. In principle, they are not so expensive, but they look very attractive. They are bright, do not react to moisture, do not need specific care.

When choosing a design, pay attention to the quality of the plastic. It should not emit toxins when heated.

original plastic triangular swing

Plastic swings in the country may not always be in harmony with the surrounding landscape. The modernity of the material can negate all the efforts of the designer to give the landscape a vintage or rustic look. It cannot be called positive that the plastic swing is not an attraction for the whole family. Neither teenagers nor adults can ride them.

And further. In a do-it-yourself swing for a summer residence, a symbiosis of materials may well slip through. It won't sound like nonsense. Wood can be a wonderful addition to metal, and a rope to wood.

Where to put a swing in the country

Before you start working on a swing with your own hands, remember that the design should become an integral part of the overall stylistic decision for the design of the site, and think about where you are going to put it. This will help determine the design of the product and will affect the choice of material.

a portable metal swing in the Art Nouveau style fits perfectly into the landscape design

Playgrounds and adult recreation areas remain the standard installation site for swings. If you are going to make a do-it-yourself wooden swing for a summer residence, it would be nice to place them on the terrace. The roof of the building will become a reliable protection against adverse natural influences and will contribute to the long-term operation of the relaxation accessory. With the size, you won’t be able to accelerate much, but for the standard option for two, there will always be a place in the gazebo.

the roof of the veranda will protect the swing from adverse weather conditions

Alternatively, the swing can be taken out under a pergola or arranged in an arch. The latter will be an excellent support for hanging swings for summer cottages. The green cover will shade the seat from the sun, so you only need to hide it from the rain.

Swing as a stylish addition to a stylish landscape

“When constructing a swing with your own hands, stop at a laconic, but not devoid of roundness of lines frame and neutral colors”

A swing is one of the few pieces of country furniture that helps fill it with comfort. Ever wondered how pleasant they can be to spend an evening or an afternoon siesta? Just imagine: a gentle breeze, bird trills, the aroma of flowers - all these charms will bring much more pleasure if you taste them slowly flying towards you. It remains only to find a swing for the dacha of a design that meets your needs and with a design suitable for the garden setting.

The bestsellers today are models with a fabric canopy and soft seat cushions. They are relevant for any landscapes decorated in rustic styles, especially in French country. Craftsmen can assemble such a summer swing with their own hands. They will look much more interesting than store-bought ones, as you will get a chance to play with shapes and decorate them with prettier fabrics.

swing in the middle of a picturesque summer cottage

A spectacular element of garden decor in a rustic spirit will be obtained from a swing made with one's own hands from rough wood.

In the airy and sophisticated gardens, you should look for a wrought-iron swing, with wooden seats and a polycarbonate roof.

A stylish model of a swing-cocoon decorates cottages with classical and progressive landscapes.

a swing bench in the background allows you to admire the interior of the landscape

A swing to the country with a modern landscape solution can be in the form of a deck chair and be made in gray and white colors. No less relevant are steel swing chairs, the seat of which seems to be woven from air bubbles. The design is openwork, so it does not look rough, although it has some kind of alien look. You can buy such a swing in metallic or lavender color.

wicker rattan swing design

Suspended swings for high-tech cottages should be distinguished by original design and modern materials of manufacture. Their task is not only to increase the comfort of rest, but also to become the accent center of the relaxation zone.

a cozy sitting area equipped with a swing-bench

Do-it-yourself wooden swings are not too difficult to assemble for an Art Nouveau garden. These should be imposing looking structures in original design, covered with soft mattresses, comfortable seating.

In landscapes with an eastern slope, you can hang a swing-drop or put a “Moon” rocking chair. The last option is more solid. Such a swing in the country will give you the opportunity to even take a nap.

an alpine slide with an artificial pond is complemented by a loft-style swing

Sun lovers should be interested in rattan swings-chaise lounges. You can sunbathe in them with great comfort. Those who seek solitude have no choice but to make a swing in the country with a closed chair-seat. Such hanging nests will serve as a compromise and allow you to stay in the fresh air, hiding from prying eyes and annoying sounds. Inside this makeshift house is incredibly cozy, therefore, if you have the opportunity to make several similar options, do not give up on the idea, otherwise you will find yourself in a constant battle for a comfortable stay not only with the rest of the household, but also with cats. The swing model is universal and can decorate a garden of any stylistic direction.

traditional children's swing on A-pillars

For stylistic solutions with reverence for textile decor, you should choose a swing tent. In their design, in addition to the canopy, there will be adjustable translucent curtains, with which you can create the most comfortable environment for yourself.

There is no better solution for the Gothic, how to make a do-it-yourself swing from forged elements and complement the design with lanterns that correspond to the stylistic requirements of the form. With their appearance, the garden will immediately acquire a mysterious look.

a full-fledged swing bed becomes the center of attention in landscape design

What has no boundaries is the romantic directions. The swing in the country with this design has a leading decorative role. They should have such an appearance that no one has any doubts about the comfort and coziness of the surrounding space. This means that the swing should not suffer from brevity of forms. Their frames should please the eye with the grace of curves. If you are working on DIY swing decor, make sure it has a colorful look. Paint the seat and uprights in bright, eye-catching colors. In priority:

• green;
• Orange;
• red;
• yellow.

Pay attention to the shape of the seat. It should be very comfortable and really allow you to relax.

great swing for relaxing by the pool

Since swings in such landscapes are placed in prominent places, for example, near water bodies, in front of flower beds, they must be completed with canopies. But the romantically designed structure will make the greatest sensation framed by an arch entwined with greenery. However, you can find your swing in the country and another, no less original place, nothing limits you in choosing it. Fantasize for your health!

swing with an awning in the middle of a flower oasis

How to make a swing with your own hands in minimalist landscapes, what shape to give them and what material to use is not so important. In this case, attention should not be attracted by the structure itself, but by its location, or rather, the view that opens from it.

A swing in minimalism should allow you to detach from what is happening. Those sitting on them will involuntarily focus on the contemplation of the proposed landscape, and tune in to a philosophical mood.

swing set in a secluded corner of the garden

When designing a swing with your own hands, stop at a laconic, but not devoid of roundness of lines frame and neutral colors.

A few ideas on how to make a swing with your own hands

We use pallets

After construction, pallets often remain in suburban areas, which served as a pallet for transporting bricks or bulk materials. It is not at all difficult to turn them into a comfortable swing with your own hands. Of the consumables, in addition to the pallet, you need to stock up on a strong rope and find a support to which the finished structure will subsequently be attached.

homemade swing from pallets with a back for two

The easiest way to build a children's hanging swing for the street. First, process the pallet. Its surface must be made smooth, without splinters. Now impregnate it with a protective compound and open it with stain or varnish. Pass the rope under the top tier. This must be done symmetrically on both sides. Tie the loose ends into a common knot. Find a place to hang. If it is intended that only a child will use the swing, do not raise it much above the ground. For convenience, you can put a mattress with pillows on top of the makeshift seat.

wide pallet swing without back for the whole family

How to make a swing with your own hands from the same material, but for general use? The principle can be left the same, only to increase the seating area by connecting two or more pallets together. Those who are familiar with carpentry can assemble swing sofas from pallets.

Transforming a bicycle wheel

From the old rim of a bicycle wheel, you can build a magnificent, nest-like, hanging swing for a summer residence. In appearance, the design will rather resemble a hammock, in which you can ride not only sitting, but also lying down. What do you need to assemble a swing with your own hands?

1. Large bicycle rim.
2. 4 metal rings.
3. 2 fastening carabiners.
4. Multi-colored and white ropes.
5. Polypropylene pipe.

swing from a metal rim sheathed in thick fabric

How to put it all together? The polypropylene pipe is bent and hidden inside the rim. Through the existing holes for the knitting needles, the structure is tied. Then the resulting frame is braided with ropes and the seat is woven out. Knitting is carried out according to the scheme for creating a "dream catcher". The final stage is the design of the rim with colored ropes with parallel fixation of rings for suspensions.

In order for the swing in the country to live for more than one season, do not be too lazy to additionally isolate the metal rim with tubular material used in the thermal insulation of pipelines. So the metal will not rust, and the ropes will not fray so quickly. Hang the resulting swing in the shade of trees or find a place for them on the playground. Entertainment is ready!

Log swing

classic swing hanging from a tree branch

Also an original idea. Do you want to know how to make a magnificent country swing with your own hands from two unsightly logs? Here, too, you do not need to be seven spans in the forehead. The model is extremely simple and is combined from two pieces of a rounded bar and a rope. All that is needed to get a real hanging outdoor swing is to tie both logs in one plane and fix them in that position with some type of marine knot. The remaining length of the rope should be enough to hang the structure.

The second life of an old skateboard

A broken snowboard or an old skateboard should not be rushed to a landfill. Of these, you can make quite functional and cute children's swings for giving. These boards are extremely durable, so they will adapt wonderfully to their new role and last for many years. Naturally, both contenders are just seats that still need to be beaten. Do you want to know how to make a DIY swing from these remains? Extremely simple.

children's swing from an old skateboard

All that is required of you is to find a high-strength rope and cut grooves in the board to fit its diameter. There should be 4 such cuts on each side. This is necessary for reliable braiding them with a rope suspension.

It is even easier to make a skateboard construction, where the roller mechanism has been preserved. Here, the wheels are simply entangled with rope loops. You can't imagine a more reliable fixation.

And tires again

Tires have become an indispensable material in dacha design. They did not remain unclaimed in the design of swings with their own hands. There are several ways to make exciting attractions out of them.

It is easiest to work with a solid tire. Holes are drilled in its surface and rope fasteners are passed through them. From the inside, the plants are fixed with strong knots. You can take iron hooks with threads for the role of fasteners and knit a rope to them.

budget option - a swing from a car tire

Now let's see how to make a country swing with your own hands from cut tires. For work, take the tread part of the tires. We bend the first strip in half and lay perpendicular to the second. We fix the stripes at the intersection. We pass the fasteners through the bottom tire and hang the finished product on a branch or horizontal bar. Chains can be used instead of ropes.

We complicate the task

If you have carpentry skills, then you can safely take on the creation of a swing to the dacha of a more complex supporting structure. We will work with rounded timber. We will give the bearing part the shape of the letter "A". We will need 4 long logs and two short ones. To assemble the first support, we will make an angular cut of the upper ends of the long beams in a mirror image. This will allow you to install and secure them in the required form. Now we will strengthen our support by installing a crossbar. By the same principle, we will collect the second part.

a swing made of round artificially aged logs perfectly complements the table and chairs in its execution

The next step will be fixing the transverse support beam, to which the seat will be attached.

It is also proposed to make the latter from pure wood. An L-shaped frame made of thick timber is sheathed with polished and polished durable slats or narrow boards. It looks like a garden bench. For greater comfort, you can provide cobbled armrests.

Making a stationary country swing with your own hands alone will be somewhat difficult. As an assistant, it would be nice to attract someone from the household. Most of all, assistants will be required at the installation stage. But this is still far away, so let's get back to working on the design.

homemade wooden swing on an A-post with a small awning

Let's deal with the suspension of the seat to the beam. As a fastener, you can choose any adequate option that can withstand the weight of the seat itself and the people on it. Rope obviously won't do it. The chains will not look very aesthetically pleasing either, although if you work on the overall design, you can harmoniously fit them into the design. In our case, it is better to take the same rounded timber for the mounting suspension. From other parts, you will need rings or hooks and powerful carabiners.

To install a swing in the country, you will need to dig holes for the legs and immerse the supports in them by at least 80 cm. Since we have a wooden structure, it is recommended to wrap the underground part of the legs with roofing felt or grease it well with mastic to extend its service life.

the larger the plot, the more options for choosing a swing

Spend the outdoor decor at your discretion. You can add pillows to the seat, you can put a canopy over the swing, you can decorate the structure with carved elements or other accessories.

Swing in the country: features of care

"It doesn't matter how the swing is made - with your own hands or in production - the principles of maintaining their longevity and serviceability remain identical"

Is it difficult to take care of a country swing? There is nothing supernatural in this process. It doesn’t matter how the swing is made - with your own hands or in production - the principles for maintaining their longevity and serviceability remain identical.

wooden swings need care - periodic varnishing

If the structures available in the country landscape are of a wooden nature, then try to prevent them from getting wet. A tree, even in its living form, does not respond very well to an excess of moisture, and being in the form of logs even more so. What follows from this? The only thing is that wooden children's swings for the street, however, as well as garden ones, where the whole family rests, will have to be treated with protective compounds, possibly periodically varnished or painted. If the swing has a collapsible design and is removed from the site for the winter, do not store the wooden components packed in polyethylene.

metal swings do not need complex maintenance

Those who prefer rattan should remember that such products cannot be taken out into the open sun and left in the rain. Care consists in periodically wiping with a damp cloth from accumulated dust.

What will not be much trouble is with a plastic swing in the country. Nothing beats quality material. It will not lose its brilliance or form. You can clean the plastic swing in any way - both dry and wet.

non-standard design of plastic swings on the veranda of a wooden house

Their metal products are more whimsical and afraid of corrosion. Therefore, it will be necessary to monitor the integrity of the decorative layer and, if necessary, restore it in time. With regard to washing the swing - there are no restrictions.