How to make a grill from a gas cylinder with your own hands? How to make a brazier from a gas cylinder: do-it-yourself production from propane - drawings with dimensions Drawing of a brazier from a gas cylinder.

2256 10/06/2019 6 min.

What could be better than spending time outdoors with family and friends? At such moments, you enjoy communication, good company and delicious barbecue. Naturally, in such a situation, one simply cannot do without a good barbecue. In today's article, we will talk about how to make your own brazier from an ordinary gas cylinder. Believe me, it's not difficult.

Key Benefits

Lovers of outdoor recreation prefer home-made barbecues from gas cylinders for a reason. This choice provides the following benefits:

Substantial savings- when purchasing the most common one in the store, be prepared to pay a lot. If you have an unnecessary gas cylinder at your disposal, you can spend a minimum of time and money to make a high-quality, practical and convenient brazier.
Ease of manufacture. Thanks to the detailed instructions below, this product will not be difficult to make even for a beginner. All that is needed for this is to prepare the necessary tools and materials for the job.
Possibility to install additional devices. Making a brazier with your own hands, you can install additional add-ons for greater ease of use.
Possibility of easy transportation. The made device is quite easy to transport and move, as it is compact;
Increased strength and durability. The fact is that the steel used for the manufacture of cylinders has an increased level of strength in order to withstand the pressure of liquefied gas;
no need to worry about the bottom burning in your barbecue over time.

As you can see, the above advantages are in favor of homemade barbecues. If you make a little effort, then you will get a really high-quality and reliable product for frying barbecue in nature, in the backyard of the house or near.

Where to begin?

First of all, you need to find suitable LPG bottle. This will not be difficult if you have ever filled the stove with gas from cylinders. All you have to do is look into your garage. If you don't have an empty LPG tank available, don't worry, you can buy an empty bottle from metal collection points. To make a quality grill, you will need a capacity of 50 liters.

The choice of container capacity depends on what kind of barbecue you need. If a portable grill is preferred, which is easy to transport over long distances, then containers of 20-30 liters can be used.

It is also worth considering that the beginning of the upcoming work includes a welding machine, you simply cannot do without it. If you do not have this equipment, you can contact a welding specialist for help. Today this is not a problem. There are many ads where highly qualified welders offer their services for a relatively modest fee.

Before proceeding with the main work, you must make sure that the cylinder is completely empty. Pre-release gas from an empty container, your safety depends on this.

Even an empty cylinder may have gas residues or condensate inside. To completely empty it is enough unscrew the valve and wait until the gas has completely escaped. These actions should be done outdoors, do not choose closed and cramped rooms for this. It is also necessary to make sure that there are no open flames or sparks nearby, as this can lead to self-ignition of the gas.

To determine that there is no gas left in the tank, it is necessary use soapy water solution. If the valve anointed with soapy water does not emit bubbles, then the job is done, the container is completely empty. But that's not all.

Next, it is necessary to turn the cylinder upside down so that the condensate accumulated inside can completely come out. After that, the container must be filled to the top with plain water and left for a couple of days. To do this, you need a regular hose with water pressure. How to lay paving slabs with your own hands on concrete will tell.

Only after the above actions, subsequent work with the container will be as safe as possible. It is worth emphasizing that the above steps are mandatory Your safety and those around you depend on it.

After that, you can proceed to an equally important point -. This process is individual, since each person can make some adjustments to the drawing for the further convenience of using the barbecue. Determine all the main parameters of the future product and write them down on a piece of paper. In this case, nothing should be missed.

It is also worth making sure that all the necessary tools are at hand, which include:

electric drill;
grinder with a disk for metal;
screwdriver or screwdriver;
loops of the desired size;
pipe;
metal rivets;
apparatus for welding.

Naturally, the main thing that is still required is the balloon itself. As mentioned above, it is preferable to use a 50 liter container, but smaller containers can be chosen.

Subsequent markup

Next, we need to mark our capacity. For example, we will choose a model for 50 liters. This volume is suitable for making approximately 6 servings of shish kebab. The diameter of this container is 96 cm. To ensure the evenness of the markup, indent from the longitudinal seam. This diameter can be divided into four equal parts, 24 cm each.

Make equal indents from the seam and mark them with chalk or a marker. After that, lay the product horizontally, and mark the placements for skewers in the amount of six pieces. The cylinder also contains transverse seams, they must be retreated by approximately 3 cm. The step between these marks can be selected at 8 cm. It is necessary to make holes of the desired diameter in the marked areas. How to make drip irrigation from plastic bottles with your own hands, read on.

It is better to measure many times than to cut once. Take the markup process more than seriously. Double-check the length and breadth of the correctness of the calculations before moving on to the next stage of the work being done.

Sawing

After you are convinced of the correctness of the applied markup, you can proceed to the next, more important stage of work - sawing. For these purposes Bulgarian is perfect. Saw strictly along the marked lines, without deviating from them even a millimeter. When working with an angle grinder, it is important to use elementary safety rules. When cutting metal with a grinder, small fragments of chips can get into the eyes and onto the skin. Because of these nuances, it is important to use special safety glasses, tight clothing, a hat and gloves. Remember, safety is above all. Find out how to choose a nose for watering a garden from a barrel.

Cutting a balloon with a grinder will not be difficult, since the thickness of its walls is about 3 mm. After the sawing is done, you can proceed to subsequent work.

Handle and lid welding

It is worth emphasizing that it is not necessary to make a barbecue with a lid, you can do without it. But, if you still decide to make a barbecue with a lid, then this is the right choice. Thanks to the lid, you can extinguish the flame and protect the inside of the grill from moisture.

In order for the lid to open and close, you will need a pair of strong hinges. Depending on the selected number of loops, they are placed at an equally distant distance from each other. One part of the loop is welded to the surface of the grill, and the other part directly to the lid itself. He will tell you about the rules for installing a polycarbonate greenhouse.

When determining the height Also, there are a few things to keep in mind:

ease of transportation of the grill in transport;
comfort in cooking.

If the legs are too long, the brazier simply does not fit in the car. If you choose short legs, you will not be comfortable working with the grill. In this matter, the main thing is to find a middle ground. Practice shows that the optimal height of the structure is about 40 cm.

In order to make the legs, you can choose a regular pipe, pre-cut into equal parts. So that the ends of the legs do not go deep into the ground, make flat areas at their ends. For this, a sheet of metal of a certain thickness is suitable.

Handles, with which it is convenient to raise the grill and open the lid, you can make them yourself or purchase them in a store. Desirable use metal handles, as they will last much longer and will not become unusable due to exposure to high temperatures. Read about growing ginger at home.

dangers

When making a grill from a conventional cylinder, one must take into account potential hazards that may affect the quality of the product, namely:

Poor welding work will certainly affect the strength of the grill. If you are not competent in this matter, it is best to use the services of experienced professionals.
Using a heat-resistant coating for your product, you will significantly raise its aesthetic appearance.
The finished structure will have an impressive weight which will affect the ease of transportation.

Consider the above nuances when making your own barbecue.

Brazier from a cylinder, video

Making your own hands, like a grill from a balloon, is as easy as shelling pears. All that is needed for this is to follow the above instructions, believe in your own strengths and show a little ingenuity. Be sure you will succeed.

The brazier is popular with those who like to relax in a big company in the country. The standard sizes of steel versions of the brazier and kebab, which are presented in stores, are only suitable for cooking a few pieces of meat. It is inconvenient to make steaks and kebabs on a brick building. Not everyone will decide to make a stationary construction for a barbecue. It is much easier to make a brazier from a car gas cylinder with your own hands.

To build a barbecue oven from a propane gas cylinder with your own hands, you will need a 50-liter container about 1.2 meters high. Such dimensions are most suitable for a rocket brazier. You can buy a gas cylinder in any specialized store or order it on the Internet portal. Online shopping is cheaper. If you plan to take the product in an offline store, it is better to give preference to Moscow firms. After all, large companies operate in the capital, the cost of their products is below the average price in the country. In addition, such organizations often offer free shipping.

To create a hot smoked brazier, you will need the following tools:

Drill.
Chisel.
A hammer.
Bulgarian.
Metal corner.
Screwdriver.
Metal tube.
Door hinges in the amount of two pieces.
Wrench.

On average, a home-made design will cost 2,500 rubles. This is inexpensive, especially when you consider that a finished high-quality brazier costs at least 15,000 rubles. The only disadvantage of a gas cylinder brazier is the increased fuel consumption in winter. After all, the metal cools quickly due to its low heat capacity. Check out the article about .

Making a homemade brazier from a gas cylinder

To create an open small brazier from a freon gas cylinder, no drawings are needed. Barbecue is no problem either. There is no single correct scheme.

Therefore, a metal structure should be made, focusing on personal preferences and the method of cooking.

If it is supposed to use ready-made coals and a grate, then it is recommended to make the distance between them small. It is enough to cut the cylinder or barrel evenly along the middle. If the summer resident plans to use skewers, the lid will have to be made smaller in height than the base.

Reviews of home-made cauldrons, barbecues from a gas cylinder or rims are mostly positive: the work is not difficult and does not require special knowledge and skills. And there are a huge number of manufacturing options, which can be seen in the pictures on the Internet.

Step by step instructions are given below:

Rinse the bottle.
Cut it into two equal parts along, if you plan a regular barbecue. Or cut a rectangle in it if a barbecue is being constructed.
Decide on the height of the brazier and make legs and a stand. They are made from pipes. Four holes should be drilled at the bottom of the base. Insert bolts, fix them with nuts.
Install cover. To do this, make holes for the loops. Fixed with rivets and welded.
If a removable cover is planned, then metal strips are attached to the edges of the barbecue.

open type, without cover

It is easiest to make a brazier without a lid yourself. To turn an old gas cylinder into a brazier, you should cut the container in half and drill holes in the sides for air to enter. Usually, one half of a gas cylinder is enough to create such a product. It is installed on a support of stones, bricks, or simply on an earthen embankment. You can also make legs and weld them to the bottom.

The manufacture of such a structure takes a minimum amount of time. But in use the brazier will not differ in convenience. And its appearance is not particularly attractive. Therefore, there will be nothing to brag to friends. Many experts advise: if you have at least small skills in welding, forging, it is better to try to make some more interesting model. For example, a brazier in the form of a locomotive or a pig.

How to make a barbecue?

Structurally, a barbecue is a more complex option than a brazier without a lid. The bottom line is that the side of the cylinder is cut off and attached to the hinges - a door is obtained. Inside the container, a place is made for coals, a grid for frying products is installed.

To give a home-made barbecue and hearth functionality, they will improve the air supply to the stove. To do this, do the following:

If desired, you can modify the design. For example, build a canopy, make shelves, weld an exhaust pipe for good traction. To make it convenient to transport the barbecue, two legs are equipped with wheels, and the third is used for emphasis. It is desirable to make the handle for transportation long. It is convenient to have a board for seasonings and utensils on it.

Features of a homemade smokehouse

The smokehouse differs from the usual brazier in tightness and the presence of a firebox. To make such a design, you first need to draw up a project. It is easy to find a suitable scheme on the Internet. Next, you should inspect the gas cylinder. If the surface is rusted, the product is not suitable for a smokehouse. If the cylinder is new, it is necessary to drain the gas by unscrewing the valve. Then the container is cut into two parts and connected with hinges. Fix the handles and weld the legs. A grid is inserted inside the container. A portable homemade smokehouse is ready.

As for stationary options, they are made a little differently. From the edge of the cylinder, where there is a weld, indent and draw a line three centimeters below the perimeter. You should get two circles. The cylinder is cut in straight lines in the middle (to prevent the formation of fire, the vessel is pre-filled with water). It turns out a lid in a curved form and a smokehouse cutout. There are different options for the execution of the smokehouse. When the work is completed, the product is checked for stability. Usually, if the legs are long, the structure is not securely on the ground. Therefore, additionally, corners are installed at the bottom of the legs.

We make a smoker with our own hands

If you already have experience in creating a barbecue from a gas cylinder, you can try to make a smoker that will combine two functions: smoking and frying food. To do this, you will need two cylinders with a volume of 27 and 50 liters, a welding machine, rods for the bed, a pipe elbow, electrodes, a piece of a meter-long pipe with a diameter of about 15 centimeters.

Smoker grill is created in this way:

Unusual barbecue options

You won’t surprise anyone with ordinary braziers from gas cylinders, so summer residents are trying to create unusual options that do not differ in their functionality from modern factory designs.

For example, they make a brazier in the form of a steam locomotive or a pig. There is no need to buy special materials. It turns out such a brazier is cheap, but it looks original. The main thing is to know the principles of welding and understand how to make a brazier with your own hands so that it performs all its functions to the fullest and serves for a long time.

How to weld a steam locomotive?

The design in the form of a steam locomotive combines a brazier, a grill, a smokehouse and a barbecue. Externally, the product really looks like a steam locomotive. Such a model is built from several cylinders, main pipes and barrels. Each pipe has its own purpose. Steam locomotives with pipes of different diameters look especially good.

To create a brazier-steam locomotive, you will need three gas vessels. The side bases of the sewing machine are suitable as supports. The container on the right side performs the function of a barbecue, in the middle - a brazier. The first cylinder is installed vertically and a circle is cut out on the side with the diameter of the horizontal middle cylinder. On the middle vessel, the extreme left part is cut off and the cylinder is welded to the first vessel. The third cylinder with a cutout on the side is also welded to the second cylinder. A pipe is installed on a vertical vessel and a damper is made. A temperature sensor is installed on the first and second containers. A door is made in each cylinder: they are cut out and connected using canopies. Iron arched segments are welded onto the door, which will serve as handles.

Wheels are made from the remaining parts of the cylinders. But, to add style and originality, many use forging elements. It is recommended to install retractable grilles, tables, and other functional details. It is important, after creating a brazier-steam locomotive, to completely cover it with special paint up to 1000 degrees. Without a heat-resistant coating on such a product, it is easy to get burned.

Piglet and pig

It looks interesting brazier, created in the form of a pig, a pig. For the manufacture will require only one old gas cylinder. The container is placed horizontally and the lid is cut out, as is the case with the creation of a conventional smokehouse. The lid is put on hinges. The legs are made of metal pipes. In order for them to securely hold the structure, a lattice is installed in the middle of their length. The nose and mouth are made from pieces of metal pipe. Ears are cut out of metal sheets, iron and welded to the part of the vessel that serves as the pig's head. It is recommended to use forging elements.

There are many photos and videos on the Internet that show how such a brazier looks like and how it is created. You can make a brazier in the form of a pig in just a couple of days. The main thing is to be able to work with a welding tool and be familiar with the forging technique.

The final stage - painting

The paint protects the metal surface from rust, as well as the temperature difference that occurs during the use of the barbecue. For dyeing at home, a heat-resistant composition is used that can withstand up to +700 degrees. In this case, the coating will have to be updated periodically.

The painting steps are below:

Clean the surface of the gas cylinder from the old coating. To do this, use sandpaper.
Degrease with acetone, solvent or alcohol.
Heat-resistant paint is mixed until a homogeneous consistency is obtained. All clots and sediment are removed. If the solution is too thick, add a little solvent.
Apply the coloring composition with a roller or brush. To make the surface smooth and beautiful, you will need to paint in several layers. Drying time should be from 30 minutes to 2 hours.
It all depends on the type of paint.

If you plan to paint the brazier on the street, the air temperature should not be above +40 and below +20 degrees. What kind of paint to process the structure so that it does not rust? Most often, waterproof acrylic paints in aerosol cans or oil burnishing are used. They dry quickly, are durable, safe and have anti-corrosion properties.

Today, on the Internet, you can find many original ideas on how and from what to make a brazier. This article will discuss how to make a barbecue from a gas cylinder with your own hands. It seems that this is unrealistic, but there were craftsmen who developed a whole technology. We will provide you with a detailed description, photos and videos for clarity. Moreover, you will be able to make sure that you are quite capable of implementing such an idea.

Varieties of barbecue from cylinders

There are several types of barbecue that you can make yourself:

regular without lid;
smokehouse;
smoker;
B-B-Q.

Each of these species has its own distinctive features. For example, a barbecue means a conventional design in which a part of the cylinder is cut off, hinges are fixed to install the door, and a charcoal grid is placed inside. Everything is very simple and primitive.

As for the smokehouse, everything is a little different here. Such a brazier must have complete tightness and be equipped with a firebox. To make a smokehouse, a strip of metal and part of the bottom are cut off. Additionally, the building is equipped with a pipe (chimney).

Well, another type of barbecue has such a name as a smoker. In another way, the people call it a steam locomotive. It has a barbecue, grill, barbecue and. Production usually requires several gas cylinders. After completion of manufacturing, the design really resembles a steam locomotive.

Required tools for making

To make a barbecue from a gas cylinder, you will need to collect special tools and materials. So, in the process of work, the following is necessary:

welding machine;
grinder with a cutting wheel;
clamps;
metal pipe;
electric drill;
a sheet of metal about 4 mm thick;
aluminum rivets;
hinges for mounting the cover;
bottle of 50 liters.

Important! Using such a container to make a barbecue is dangerous. To prevent accident, make sure it is completely out of gas before cutting.

Removing gas from the cylinder is quite simple. To do this, you need to put the cylinder upside down and completely twist the valve. Given that the gas is heavier than air, the gas will escape quickly. To check, you can use soap by lathering the neck of the cylinder. If bubbles appear, then the gas is still escaping. To be completely sure that the balloon is empty, fill it with water.

In this video, you can clearly see how to make a barbecue from a gas cylinder:

Barbecue instructions

So, the process of making a barbecue grill from used cylinders with your own hands consists of several successive stages, which we will tell you about later. Be sure to watch the prepared videos, since theory is one thing, but seeing it in practice is another.

So, first of all, take a standard 50 liter bottle. Do not cut off the side walls, that is, the top and bottom of the cylinder. Otherwise, the wind will not inflate the coals for frying meat. To cut out the necessary part in the balloon, find the seam. Using a grinder and a cutting wheel for metal, perform a cut.

After cutting along the seams, you will find the locating rings, which are necessary for joining the bottom and the gas cylinder body. They shouldn't be cut off. They will serve as a shelf for the lid. So, it turns out you cut off the balloon so that you have two parts. One of them will serve as a cover.

The next step is to fasten the loops. They can be fixed by welding, having previously fixed them with aluminum rivets. As a result, the gas cylinder will regain its shape, only a part will be fixed to the canopies. Thus, a barbecue is formed from a balloon.

The next step is to attach the handles that allow you to easily open the lid of the barbecue. For this purpose, it is recommended to use metal handles that can handle high temperatures.

Important! So that under the influence of high temperatures the gas cylinder does not lead, weld a metal corner 32 × 32 mm along the perimeter of the edges of the hole. Clamps come in handy for this. Having clamped the product with them, weld the corner to the cylinder by welding. This corner will also serve as a support for the skewers.

A similar procedure should be carried out on the side of the loops. Only the corner is welded from the inside of the gas cylinder. The next step is to work on the legs. The legs can be a round or square pipe, or the same metal corner that was welded to reinforce the gas cylinder. The legs are welded by welding so that they have the same length. Pay attention to the fact that it is important to decide what type of barbecue you want to make: portable or stationary. Based on this, it is decided which legs will be. For example, for a portable one, you can fix small wheels or weld metal “pyataks”, which will prevent the barbecue from “drowning” into the ground. As for the stationary, the base can be poured with concrete, and the legs can be concreted.

Advice! In the process of welding the loops to the cylinder body and its cover, make sure that everything is done exactly. Fixing it will be quite problematic. Therefore, outside help is needed here to hold the hinged lid and mark where and how to cook.

When all the main elements are welded, it remains to put the lid on the hinges. Here it is important to weld limiters for the cover. Otherwise, the lid will fall into the barbecue from the gas cylinder. After that, it is imperative to test the stability of a home-made barbecue from a gas cylinder. Open the lid and release it. If the bbq doesn't fall, all is well done. If it falls, then the legs must be additionally fastened with a corner or the angle of the legs must be increased.

To provide the necessary thrust during the combustion of fuel, holes must be drilled throughout the body. Ash and water will also fall out through them. In fact, at this stage, we can assume that the barbecue from the gas cylinder is ready.

It is extremely important to carry out quality final cleaning work. Sand all welds. Make sure that there are no build-ups in the inside of the balloon, which, during the heating process, will peel off and smoke on the meat.

Additionally, a barbecue from a gas cylinder can be equipped with a pipe, which will significantly increase traction. To make the barbecue easy to move, small wheels can be welded onto the legs. As practice shows, for the convenience of using a barbecue from a gas cylinder, it is necessary to divide the product into two parts. In one, protrusions are made for installing gratings, and in the second, slots for skewers are made. There are no special restrictions. You can view the videos and photos in this article and take the original idea for yourself.

The better to paint a barbecue

Barbecue from a gas cylinder can be painted with two types of paint:

Powder thermal paint. This method is difficult to implement at home, as high-temperature barbecue burning is required.
Heat-resistant organosilicon enamel. This paint is able to withstand temperatures up to 600°C.

Another method of painting is also known - oxidation. This is a rather laborious process for home craftsmen, but it is quite real. The product is treated with sulfuric acid 5%. After that, boil in a highly concentrated solution of laundry soap for two hours in a solution of sodium hydroxide. This barbecue will serve you for many years. Throughout the operation, corrosion will not take it.

Advice! Regardless of the type of paint you choose, be sure to clean the barbecue from all sorts of contaminants. Additionally, you will need to degrease the surface.

Conclusion

So, we have considered all the features of making a barbecue. This is a troublesome business, but the result will not leave you indifferent. It will be especially nice when you cook the first barbecue or fry vegetables. Such food is known to be very nutritious. For this reason, do not deprive yourself of such a blessing. With a little effort, you can do everything yourself. Complete the video and evaluate your abilities. We hope that this material will help you in this matter. In the comments to this article, you can share your own experience with our homemade readers, who, like you, want to do everything themselves, saving money.

Going out into nature with a large company involves cooking barbecue and other dishes, for this it is enough to find an acceptable place. On a summer cottage or a country terrace, you can’t do without a barbecue, a tool that provides the opportunity to cook delicious barbecue or meat on your own. If you create a beautiful barbecue, it will fit into any interior of the site and add uniqueness. Making a brazier is possible with your own hands, using improvised means, such as a gas cylinder or a pipe.

Types of barbecues

Charcoal cooking is possible in many ways. Brazier has proven itself on the positive side, has a number of advantages and is divided into several categories.

Portable structures are used for frequent movement. The advantages include low weight and simple design, as well as the availability of ready-made options on the market. The functionality of such braziers is modest; additional devices will be needed to prepare dishes that differ from kebabs.
Portable braziers have a more durable design; a brazier from a gas cylinder belongs to this category. The design can be moved inside the site or in a car trailer, has better functionality, is quite simply made by hand from improvised materials.
Stationary braziers are installed in the foundation, have a solid structure and a lot of weight. The main features are the design of the structure, which, with a creative approach, can decorate a summer cottage.

In more detail it is worth considering the brazier from the cylinder, because. This device has all the functionality of a stationary device, it is mobile. Thus, a do-it-yourself barbecue from a gas cylinder can save the owner financial resources, because store models with similar parameters are not cheap. The design can vary in size, regardless of the cylinder used, which makes it possible to accommodate a large number of dishes for cooking with a large company. The height can be adjusted by welding on the legs, which makes the process of frying kebabs convenient and ergonomic. Also, with the help of improvised tools, it is possible to make a decorative look, which will add uniqueness, add beauty to the summer cottage.

Preparation for manufacturing drawings and optimal dimensions

Before cutting the prepared cylinder, you need to remember safety precautions. Sedimentary vapors always remain in gas cylinders, which, when interacting with a spark or welding, can lead to unpleasant consequences.

The manufacture of a brazier from a gas cylinder begins with the emptying of the container, for this the main valve is unscrewed, the gas is vented. The procedure is performed with extreme caution, in a well-ventilated area, away from sources of fire or direct sunlight. It is possible to visually verify that the balloon is empty using a soapy solution, it is enough to apply it to the outlet nozzle, observe the formation of bubbles. If gas escapes, accordingly, soapy water begins to bubble, after which it is necessary to unscrew the valve with a wrench, completely remove it from the cylinder.

After bleeding off the gas, it is necessary to turn the gas container over, drain all the condensate. After that, water is supplied under high pressure, which will displace the residual vapors and remove the condensate completely. Drainage of water must be carried out far from residential premises, the properties of the gas are such that a fire can occur at a low concentration. Compliance with the sequence of all procedures makes the work safe for humans.

To make a brazier with your own hands, you need to use the drawings. The dimensions are selected in accordance with the volume and shape of the cylinder, with standard equipment the height is 98 cm, the diameter is 30 cm. The wall thickness of the gas container is standard, but may differ from the direct purpose of the cylinder, it is 0.3 cm, the weight of the cylinder is 22 kg.

Cylinder marking

Before making a brazier from a gas cylinder, it is necessary to mark it according to the required parameters. To mark, ordinary chalk is used, the process is as follows:

A certain diameter is 96 cm, it is easily divided into equal parts. For uniformity, markings are made along the longitudinal seam.
Marks for placing skewers are set in a horizontal position, 24 cm in each direction recede from the seam.
The device of the cover is carried out according to the deviation of 3 cm from the seam.
10 cm deviate from the two lines obtained, this is done for parallel fastening of the legs in the future.
The cut lines under the cover act as borders, which are applied at the first stage (24 cm of indent).
If there are inner rings in the design of the cylinder, it is necessary to work carefully so as not to damage them. In the future, they will play the role of a lid holder.

Layout and dimensions of the future brazier in the drawing

Work on the manufacture of barbecue does not require special drawings. It is necessary to mark the parameters of the future barbecue based on the size of the balloon. A specific barbecue scheme from gas cylinders is not required, it all depends on the functional accessory, the size of the device. The height of the cut and cover is regulated by the combustible means used. If ready-made coals are used, it is possible to cut the cylinder in half; in case of burning firewood, the lid should be higher so that the blanks do not fall out.

Choice of gas bottle

For a gas barbecue, suitable material is used, including a cylinder. You can find the appropriate barbecue cylinder in the country, if a propane gas burner was used, at scrap metal collection points or private ads. The gas brazier is standardly made from a cylinder with a capacity of 50 liters. The main selection criteria is the whole body without rust and oxides, in order to prevent further destruction of the finished product.

Tools needed for the job

For quick work, you need to prepare the appropriate tool. You will need a set of home master tools, as well as a few additional things:

grinder or grinder;
welding machine of any type;
personal protective equipment, glasses, gloves;
metal door hinges in the amount of 3 to 5 pieces;
rivet gun, rivets;
chisel, hammer;
screwdriver, wrench;
drill with a set of drills (a drill of 10-12 mm is required);
pipes for the chimney and legs, the latter are used materials from unused sewing machines.

The use of tools requires certain skills, the material of gas containers is quite thick, not every novice master will be able to competently cut and weld metal.

How to properly open a propane tank

Safe work is achieved through well-executed preparatory work. The washed cylinder must be cut into two halves with a grinder, the process is carried out as close as possible to the weld. The side walls are not dismantled, their purpose is to protect the fire from the wind, to maintain temperature indicators. The support rings should not be sawn, their task is to keep the lid closed.

How to paint

From an aesthetic point of view, it is necessary to paint the balloon. The process is the choice of each individual, it is not at all necessary to spend time and effort on it. To paint the brazier from a gas cylinder, you should use high-quality components that do not decompose under the influence of high temperatures, without changing the taste of food.

Before painting, a primer layer is applied, which is selected on the market according to the type of paint. Before purchasing, you should study the purpose and instructions, the temperature of the paint should be more than 600 degrees. As a rule, these materials are environmentally friendly, so it is possible to paint the building not only from the outside.

We make a brazier from a metal cylinder

For country use, an ordinary barbecue is often not enough. It is possible to make a barbecue with your own hands from a gas cylinder. To do this, you must follow the step-by-step instructions, in which case you will get a beautiful, high-quality product.

The hinges for attaching the lid to the body can be welded on before cutting, so that they are installed evenly, without distortions in relation to the top. The cover is fastened to the body with a metal bar.
The limiter must be installed on the back of the brazier to prevent the lid from completely lowering. So it will be convenient to close and open the device during use.
Blower holes can be drilled, but it will be much faster to cut them with a grinding tool. Vertical slots are made along the entire length, holes for attaching skewers are drilled with a drill with the required distance.

Barbecue legs can be made independently in various ways, it is also possible to use a ready-made stand from an old sewing machine. The frying process in accelerated mode implies a closed lid; a pipe must be mounted to remove smoke. A balloon barbecue is made by adding corners to the structure in the inner part, for attaching a mesh or metal bars.

Brazier steam locomotive

The design, called a steam locomotive, combines several devices at once, has rich functionality. The device is used as a grill, barbecue, smokehouse and a regular barbecue. Each component has a significance, certain functions.

Brazier "Steam locomotive"

The design of this type of barbecue from a gas cylinder resembles a steam locomotive, if you make an effort to look. Additional designs allow you to store firewood, products, etc. When making a locomotive, it is equipped with all sorts of details to increase the functionality of the device. Brazier steam locomotive from a gas cylinder allows you to simultaneously smoke products, cook vegetables and fry shish kebab, an indispensable device for a large company.

Features of a brazier made on the basis of a gas cylinder

Self-manufacturing makes it possible to select the necessary parameters, the functionality of the equipment. Braziers from gas cylinders are popular among owners of summer cottages and houses. Installing additional elements makes it possible to cook many products in various ways. The offered models on the market often do not meet the wishes of the client, there are no height adjustments or the design is not capacious enough.

Advantages and disadvantages

All devices have a number of positive and negative sides. The brazier from gas-balloon equipment became famous for its simplicity of design and other qualities:

a simple manufacturing method allows even an inexperienced craftsman to build a brazier, having tools, fixtures, and a visual aid on hand;
the use of improvised means excludes financial costs, monetary losses entail only a tool, some additional elements;
long service life is due to the thick metal in the walls of the cylinder, the manufactured part is not subject to temperature effects or mechanical damage;
The flip-top lid allows you to cook your favorite dishes outdoors in adverse weather conditions.

Brazier from a gas cylinder in the form of a wild boar

Disadvantages of a brazier from a gas cylinder:

the dimensions of the structure may not always allow you to move, install the brazier in the right place;
the weight of the structure is large, so moving without special devices alone is impossible;
the use of firewood will delay the cooking process for a long time.

The nuances of using the received product

Proper technical operation makes it possible to use the manufactured structure for a long time. During downtime, it is better to clean the structure indoors to avoid exposure to direct sunlight and the formation of corrosion.

Odors are eliminated by burning the inside of the brazier. The design must be used away from flammable parts, as a spark may jump out during operation. After use, it is recommended to pour out the ashes, high-quality raw materials can continue to smolder for up to several days.

To provide kebabs or other equally appetizing dishes, some effort must be made. Using a grill will make the process much easier. It can be purchased at a specialized store or made by yourself.

Selection of materials

For the manufacture of the device, you need a gas cylinder, the capacity of which is 50 ml. This decision is explained by the fact that its height is 96 cm, diameter is 26 cm, and the wall thickness is 3 mm. These indicators are considered the most optimal.

In addition, you need to prepare:

grinder;
welding inverter;
metal pipe;
drill;
several corners (25 × 25 mm) and door hinges;
metal tape;
a hammer;
chisel;
screwdriver
wrench.

A prerequisite is the ability to use a welding machine (grinder) and the availability of the necessary drawings. In the absence of experience in such work, you should contact professionals.

At this stage, you need to properly prepare the gas cylinder. This is necessary because of its possible ignition. It is better to spend a certain amount
more time than to suffer. Ignoring safety precautions can lead to serious consequences.

First, turn the valve on the cylinder so that the remaining gas inside comes out. After it must be turned over and allowed to drain the remnants of the substance that was previously in it. The last stage includes washing and drying the selected container. You should not be afraid that the quality of food may suffer due to the choice of material for the base. Gas in the cylinder will not remain if all the above actions are carried out correctly.

Creating a brazier begins with cutting the container into two equal parts. To do this, you need a grinder or gas cutter. The edges of the cuts must then be sanded. From one half make the top cover. It will be fastened to the second part with the help of loops for which additional holes are drilled. The loops themselves must be fastened with rivets, not forgetting about the subsequent brewing.

It should be noted that the disc of the grinder during separation should be perpendicular to the container, and it is advisable to start cutting from the middle of the cylinder to its edge along the previously marked boundaries. In order to avoid damage to the grinder disk in several places, it is necessary to leave uncut sections. The main thing is that you can then get rid of them with a chisel. In this case, the side walls remain untouched. For a tighter pressing of the lid, the so-called sides are attached to the universal grill, which can be made from a metal tape. An example in the photo.

home > Tests