How to restore your old table with your own hands. How to restore an old wooden table? Restore an old table with your own hands

And to get the first skills necessary for this, restore the old table for a start. If your attic does not have such good things, it does not matter, on the Internet you will find a lot of ads for the sale of tables at the lowest prices from people who dream of getting rid of them.

Of course, it is better to choose a table that has, albeit a small, but still artistic value. It is much more interesting and pleasant to work with such furniture. In any case, the end result will please everyone. If in doubt, take a "before" and "after" photo - and you will see how with the help of your hands the table received a new life.

Be patient and be prepared to make a couple of mistakes. Do not rush to get upset about this. Consider this your study project.

You got the table and we we can start restoration.

You will need these materials and tools:
- the hero of the occasion himself - the old table;
- dye;
- water-based varnish;
- solvent for degreasing the surface;
- putty;
- sandpaper coarse and fine grit;
- self-tapping screws and furniture bolts (as needed);
- rubber putty knife;
- brushes for applying varnish and paint;
- a roller for applying paint to the countertop (you can use a brush);
- clamps;
- grinder (you can do without it).

1. Inspection, determination of defects and repair
Start by inspecting the table and assessing its general condition. Find defects, old furniture always has them. On our table, for example, cracks and scratches were found. In addition, in some places the varnish has worn off, in others it has cracked. All this will have to be corrected.

Better luck with legs. They do not stagger or hang out, which means that we do not have to disassemble the entire table. If you are less fortunate, even better - by correcting the situation, you will get a useful repair experience.

Check the leg mount. If this is a screw connection, you just need to tighten the screws and watch the table. Starts to stagger again - replace the screws.

If the leg is attached to the table with glue and it loosens, then the glue has dried out. To correct the situation, disassemble the table, thoroughly clean the joint surface from the remnants of old glue and apply a new layer according to the instructions. Secure the leg with clamps and leave to dry completely for a day. If the design allows, attach it with additional self-tapping screws, and even better with furniture bolts.

2. Sanding
The repair is over, and you can start grinding. To do this, use a grinder. If you don't have one, use coarse and fine grit sandpaper and sand by hand. However, depending on the type of wood and the degree of damage, such manual work can take a very long time and effort. But there are also positive aspects here. For example, without having the necessary skill, you will not be able to spoil the product in the process of work, and manual grinding will allow you to feel the material and get an idea about some of its properties.

We used a grinder. First, go over the surface of the table with a nozzle with coarse paper. Grind carefully, without pressure and special efforts. First, get a feel for the material. Now move on to paper with less grain to make the surface as smooth as possible. Remove the remains of varnish and paint.

Grinding curly parts is carried out exclusively by hand, so as not to damage the relief. Only in cases where the design does not allow this, use power tools with suitable nozzles.

After grinding, be sure to remove all dust from the surface of the table and workplace. Use a vacuum cleaner.

3. Putty
All deep defects, whether it be scratches or dents that could not be eliminated during the grinding process, should be puttied with a special wood putty.

Use a rubber spatula to do this and apply putty to damaged areas. Wait for complete drying and carefully sand the surface.

4. Coating
Let's start processing the surface with paints and varnishes.

You can combine the coating on different parts of the table. For example, we decided to paint only its lower part, and treat the countertop with stain and open it with varnish.

Start with the table top. Cover it with a stain of your chosen tone and leave it to dry completely in order to correctly evaluate the resulting shade. If the tone does not suit you, apply another layer and wait for it to dry again.

Now you can start painting the bottom. Turn over and set the table in such a way that it is convenient for you to work and in the process of work you do not have to shift it from place to place.

Surely, you have already decided on the color scheme of your future table, and we have chosen white matte warm tone paint for ours.

Paint one element and only then move on to the next so that the coating lays evenly. Let the first coat dry completely and sand the surface with fine sandpaper to achieve micro-scratches. Apply a second coat of paint, wait for it to dry and sand again.

Let there be at least three such procedures, and even better 4-5. Sanding helps each new layer of paint to penetrate the previous one without forming a thick layer. Thus, at the output we get a very durable coating that will last for more than one decade and protect the table from mechanical damage and other kinds of external influences.

To fix the result, apply a water-based varnish. It dries quickly, is relatively safe, and doesn't have the nasty odor associated with other polishes. Apply varnish with a brush, picking it up a little each time so that smudges do not form.

Also varnish the countertop. To achieve a more durable coating, proceed in the same way as in the case of paint. Apply, thus, at least a couple of layers.

Basically, the job is done. Dry the table well in a ventilated place or ventilated room to get rid of the peculiar smell and admire the creation of your own hands.

The Restavrator+ company produces high-quality and inexpensive table restoration in Moscow.Restoration of a wooden table is possible both in the workshop and at the customer's home. The location depends on the degree of wear or damage.

For a quick and correct determination of the cost of the necessary work, you can send a few photos of the table to us by mail This email address is being protected from spambots. You must have JavaScript enabled to view. or WhatsApp 8906 074 10 83.

The gradual deterioration of furniture is especially noticeable on the surface of kitchen and writing wooden tables. Therefore, the restoration of the table is a task that sooner or later almost all owners of solid wood furniture face.

Consider the most common cases of restoration:

In the photo below you can see the completely damaged tabletop surface.

For a quality restoration, we completely replaced the veneer at the countertop, updated the color and covered it with a heavy-duty varnish. Now the table looks like new, and thanks to modern wear-resistant materials, it will serve its owners for many more years.

In the next photo, we completely repainted the table.

customer request or to fit an old desk into the new interior, because it is dear to him as a memory.

Easily! We call the designer and send some photos of the interior. We select and coordinate the color with the client.

Tables made of natural material have many advantages, but wood cannot compare with plastic or artificial stone in terms of durability.

The price for the luxury of beautiful solid wood furniture is the need to be careful and periodically restore the old table, especially countertops that are subject to increased stress.

Here are some more restoration examples:

How is the restoration of the table in the workshop.

If you decide to completely update the table, then the equipped workshop is indispensable.

By prior arrangement with the client, we deliver a truck to transport furniture to the workshop.

A contract is concluded with the client for the provision of services for the restoration of the table, in which all the details and wishes of the customer are discussed:

Color matching (according to the catalog with samples)

Terms of performance of works (on average 7-14 days)

Another common case is the restoration of the table at home.

Defects that can be fixed at home:

chipped

dents

scratches

scuffs

Restoration at home implies the local elimination of minor damage on the table. Thanks to modern equipment and the experience of the restorer, we have a unique opportunity to offer our customers table restoration at home.

Wood is valued for being not only beautiful, but also a natural material. For the same reason, wooden furniture is vulnerable to wear, mechanical damage, high humidity or aggressive liquids.

As a rule, the owners of tables made of natural wood are upset by such problems:

Spots from exposure to heat, grease, dirt.

Chips from impacts, scratches from hard objects;

Surface deformation due to exposure to steam or moisture.

All these problems are easily eliminated in the restoration workshop.

Do you have a favorite, convenient and comfortable kitchen table, but its appearance has not been pleasing for a long time? Do not despair, but give him a second life. Restoration of the kitchen table is a great solution to refresh the interior of your kitchen without parting with your favorite piece of furniture. We bring to your attention some tips on how to update the kitchen table and save a considerable amount of money.

Of course, if your table is hopelessly broken and beyond repair, all the efforts made may not be justified. But more often than not, a properly selected restoration method helps bring your favorite furniture back to life, changing it beyond recognition.

This is one of the most proven and readily available technologies that allows you to return some furniture elements to a beautiful appearance and presentability. To update an old kitchen table, you will need the following materials and tools:

• grinder with different nozzles;
• mask, goggles and gloves;
• putty;
• putty knife;
• primer for wooden surfaces;
• brush for primer, varnish and paint;
• alkyd enamel paint of the required color;
• varnish or wax.

And now let's move on to the main stages of work.

Inspection of the table and identification of significant defects

At this stage, inspect the integrity of the table legs and fixtures, check if the tabletop has defects or damage. If you find that the table is loose, try tightening the connecting bolts. If such an action does not give significant changes, you will have to completely disassemble the table, sand the bumps and gaps, grooves and joints, apply glue for greater reliability and fix the glued parts with self-tapping screws.

If the legs of the table are completely out of order and repair is impossible, you can perform a complete replacement with more modern ones, for example, metal or carved, wooden ones - it all depends on the interior design of your kitchen and the chosen style. Broken fasteners must also be replaced. Keep in mind that the reconstruction of the table is not only a change in appearance, but also ensuring the reliability of the structure. Don't forget about it.

Removing the old coating

Next, you have to remove the old coating - varnish or paint. Put on a mask, goggles and use the grinder to start cleaning. You can use coarse and medium grit sandpaper, but then you need to tune in to a long and laborious job - removing paint or varnish in this way is not an easy or quick task. It is best to do this work outdoors or in a well-ventilated area. If you still decide to sand the table in the kitchen, fully open the windows and cover the floor and all the furniture around you with cloth or paper.

Treatment of cracks and chips

After grinding, it is necessary to clean the old kitchen table from dust and inspect the countertop for defects. All chips and cracks must be puttied, and after the putty dries, sand the entire surface again. The fact is that even the most minor defects will be clearly visible after painting. After a lot of effort, the resulting cleaned kitchen table surface will be ideal for creations and new designs.

Priming the table surface

After sanding the countertop and other elements of the table, it is necessary to degrease everything, and after drying, apply a primer mixture. In no case should this stage be skipped, otherwise the paintwork will be uneven and short-lived. The primer mixture is applied in two layers, each layer must dry well before applying the next. After the second layer has dried, it will take about 24 hours, it is necessary to sand the already primed surfaces again.

Kitchen table painting

This is perhaps the most pleasant stage of work in the restoration of the kitchen table with your own hands, without dirt and dust. Each stroke of the brush takes you one step closer to the desired result. The paint must be applied in two layers, and the dark color in three. The last, finishing layer must be given 3-4 days for complete drying.

Protective coating

The final stage of work is the uniform application of protective varnish in 2-3 thin layers. After each layer has dried (about 4 hours) and before applying the next, lightly sand the surface with fine-grained sandpaper. Instead of varnish, you can use wax as a protective coating - it will make the countertop matte or it can be rubbed until it shines. The first layer of wax is rubbed into the wood with a soft cotton cloth, and after drying, the second layer is applied with light circular movements. This can be repeated several more times within one day. This completes the renovation of the kitchen table. Leave the product for one week and only after this time it will be ready for full operation.

Restoration of countertops with decorative tiles

Next, we will look at how to restore the kitchen table with your own hands, using ceramic tiles or mosaics. Decorative tiles are one of the most popular materials used for cladding the surfaces of kitchen units. The choice of many people is obvious - in addition to having a variety of textures and colors, tiles are distinguished by their reliability and durability. In addition, it is very easy to maintain, easy to clean and resistant to high temperatures.

In order to restore the kitchen table with ceramic tiles, you need to choose a tile or mosaic that matches the style of your kitchen, purchase special tile adhesive, grout for joints and an edge profile.

Surface preparation is carried out according to the same principle as for painting. After finishing the preparatory work, glue is applied to the surface of the countertop with a notched trowel, which will allow you to firmly and securely fix the tile.

Tiled elements must be laid out in a pre-designed composition. The distance between the tiles is adjusted using special plastic crosses. When all the tiles are laid out and firmly pressed to the surface of the table, and the glue is completely dry, it is necessary to prepare the grout mixture and fill the seams between the tiles with it.

In order for the look of the restored table to be complete, you should also decorate the sides of the tabletop. For this purpose, special edge profiles are used, which are matched to the tone or style of the selected tile. Thus, having completed this repair, which is easily accessible for every home master, your furniture will come to life again and give originality and freshness to the design of the kitchen.

Decoupage of the kitchen table top

Consider another popular way to update furniture - decoupage. This modern decor technique allows you to quickly and, most importantly, cost-effectively transform the table, making it a bright accent of your kitchen.

To restore the table using decoupage, in addition to the materials and tools needed to clean the table from old surfaces, grind it and prime it, you will need decoupage napkins, a container of water, glue, plastic wrap, matte or semi-gloss varnish.

Decoupage countertop repair begins after it has been primed and sanded or after it has been coated with paint or varnish. First, using a pencil, you need to mark up, marking the location of the images. Next, in a container of water, you need to place the cut out paper image face down. After 30 seconds, the image is removed and placed on a plastic film, according to the same principle - face down, and all excess paper surfaces are removed.

The prepared picture is smeared with glue and attached to the prepared tabletop. In this case, using the file, you need to carefully smooth the picture and only then remove it. If desired, the surface of the pictures can be decorated with paints, and at the end the resulting image should be covered with acrylic varnish and allowed to dry thoroughly. This completes the renovation of the kitchen surface. After three days, your new exclusive table will be ready for full use.

Probably, many people have an old dining round table at home, which, due to its quality factor, is a pity to throw away and cannot be put in a conspicuous place because of a bad look. So he stands idle somewhere in the closet or in the attic. In this article we want to show you that an old dining table can get a new life. The main thing is to want, have a little patience, and you will understand that the restoration of a round table with your own hands is quite possible.

We will consider the restoration process using the example of an old round wooden table.

First of all, we inspect the table and determine the defects. On our table, for example, there are scratches and cracks. Also, the lacquer layer is outdated, and in some places it has worn off and needs updating. The whole legs do not stagger, so we will not disassemble it.

If the legs of your dining table are loose, you need to put them in order.

In the case of fastening the legs with screws, you just need to tighten the screws. If the legs are attached to the table with glue and wobble a lot, you will have to disassemble the table, clean all the connections, apply a new layer of glue, assemble all the parts again, fix the table with clamps and leave for a day until the glue dries completely.

grinding

At the next stage of the restoration, we will polish the table. For grinding, we need a sandpaper of different grit numbers, and a grinder will make our work easier.

If you don't have a grinder, you'll have to grind by hand. Although it is more difficult and longer, it is possible.

So, we take the machine with the sandpaper of the greatest grain size and pass along the surface of the table. Grind gently without strong pressure. For better removal of varnish and leveling the surface after grinding with coarse sandpaper, you need to use a sandpaper with a smaller grain size. And again, carefully grind the surface of the table. In the case of curved parts, they will have to be sanded by hand.

If, after two times grinding, irregularities or old varnish remain on the round table, you will have to grind a third time with zero grit sandpaper. After sanding, it is important to remove all dust from the surface of the dining table. To do this, use a vacuum cleaner and a damp cloth.

putty

In case of severe scratches or dents that are not removed after grinding, you need to putty the damaged areas. With a rubber spatula, apply putty to the scratches.

After the putty dries, and this is about 30 minutes, we grind the smeared places with a zero sandpaper.

gentrification

At this stage of the restoration, we proceed to painting. For painting, we chose water-based stain and varnish, because they do not have a strong odor and such materials can be used in residential areas. We will also need brushes.

Stain can cover a round table in one or several layers, depending on what color we need at the output. After each new layer, the color of the table will become deeper. Also, after each application of the stain, you need to wait until it dries completely (the time is written in the instructions for paints and varnishes), and only then apply the next layer.

When we got the color we need, we proceed to apply varnish. We apply it carefully, without haste. We collect a small amount of varnish on the brush so that there are no smudges. Leave the painted table to dry completely, for about a day.

After the first application of varnish on the surface of the table, a pile may rise, these are small particles of wood. Therefore, the table must be sanded with a sandpaper zero.

Grinding is better by hand, not pressing hard. Then we proceed to apply the second layer of varnish. Again, leave the table to dry completely.

Dry in a well ventilated area. At home, it can be a terrace, a balcony, a summer kitchen. The main thing is that water does not get on the surface.

Well, our round table after restoration is ready. And he looks much better. Such a table is not even ashamed to put in the living room. And, most importantly, we did all the repair work at home with our own hands at minimal cost from the family budget.

Many people have old furniture at home or somewhere in the country. And most often these are not expensive antiques from tsarist times, but the most ordinary cabinets, chests of drawers, tables and chairs. At first glance, it may seem that most of these things are long overdue, but take a closer look - often these are good-quality products made of solid wood or maybe even forged metal, which will last for more than one year if they are beautifully restored. In this article, we will talk about ways to decorate tables - kitchen, dining, coffee, work - different in size and shape.

However, many of the options presented are equally suitable for other interior items. Perhaps these examples will inspire you to turn nondescript shabby furniture into a real work of art, because it's so nice to contemplate the beauty made by your own hands!

12 Ways to Give New Life to an Old Table

1. Painting

The best way to update a dilapidated table is to paint it, but first you need to prepare the surface. A paint remover will help clean the product from the previous finish.

If there is rust on metal legs or accessories, it should be abundantly soaked with vinegar, Coca-Cola or a special agent, and wiped with a hard scraper after 15-20 minutes.

The wood is sanded with sandpaper, dust is removed, then impregnated with an antiseptic and a primer is applied. All chips, cracks and irregularities are rubbed with acrylic putty on wood.

For painting, you can use alkyd enamel, acrylic or epoxy paints, varnishes, aerosol compositions for metal. You will also need painting tools - a brush, roller, sponge, sprayer.

To give the table a more spectacular look - it can be painted not entirely, but only individual parts. To do this, you will need masking tape or stencils.

2. Art painting

If a monochromatic finish seems too boring, try decorating an old table with patterns. Drawings can be applied with a brush and acrylic paints - manually, through a stencil or according to outlines made using tracing paper.

A table with artistic painting will perfectly complement the interior in ethnic or rustic style, and children will like the images of animals, fairy-tale and cartoon characters.

3. Decoupage

For such a decor, you will need a brush, patterned paper napkins, PVA glue and clear furniture varnish.

Pictures are carefully torn off or cut out with scissors, the lower layers of paper are removed, then the resulting thin applications are placed in the designated place, and smeared with glue on top, trying to avoid wrinkles and tears.

If some element cannot be attached the first time, it must be immediately wiped off with a sponge moistened with warm water and try again with a similar fragment.

The dried decoupage is covered with a transparent varnish for furniture in several layers, otherwise the paper decor will quickly be erased.

4. Craquelure

Craquelure is a crackling lacquer that is deliberately given a look that imitates the texture of antique paintings. It can be one-step (the composition is applied in one layer and cracks as it dries) and two-step (two mixtures are used - one based on epoxy resins, the second - water-based, they interact and a characteristic texture is obtained). The color of the veins is determined by the bottom layer of acrylic paint, as well as the shade of the grout. Most often, powdered golden pigment or pastel is used for this purpose.

Two-step craquelure is usually complemented with decoupage or hand painting to achieve the effect of an aged painting. One-step is more suitable for products without patterns.

5. Tiles

It happens that after the repair there is a small supply of ceramic tiles. It can be used to decorate an old table - just tile a wooden base with tiles. The laying technology in this case practically does not differ from the decoration of walls or floors.

The ceramic surface is ideal for a table in the kitchen, terrace, porch, gazebo or even outdoors.

To give the table an attractive look, in addition to plain tiles, you should use patterned borders, decorative panels (perhaps even with some plots) or a stylish patchwork.

6. Mosaic

Pictures from small fragments adorn many galleries, temples and palaces. They will look just as elegant in the house, for example, on the surface of coffee tables.

Mosaic elements can be ceramic (even broken tiles will do), glass or acrylic.

From improvised materials, small round cuts of wood, chopped CDs, colored pebbles are suitable. You just need to come up with an interesting pattern and attach the pieces to the table with glue or liquid nails.

7. Self-adhesive film

The simplest and most beautiful option for decorating an old table that does not require fuss with paints is sticking a film.

This affordable material can imitate any surface - from rare woods to marble, it can have any patterns, patterns and textures.

Self-adhesive film is sold in rolls, and it is easy and pleasant to use it.

8. Decorative tape

In the shops of stationery and art supplies, a wide selection of decorative self-adhesive tapes has recently been presented. It will take you no more than 30-40 minutes to decorate an old table with multi-colored tape, and a new bright thing will appear in the interior.

If you want to change the finish, the adhesive strips can be removed just as quickly, and if there is glue left somewhere, acetone will dissolve it without any problems.

9. Epoxy resin

Epoxy resin is a liquid substance that quickly cures in the open air, turning into a hard transparent plastic.

Cracks in wood filled in this way look very unusual, and if luminescent powder is added to the liquid phase, they will glow brightly in the dark.

Also, dried flowers, leaves, shells, coins can be placed in epoxy resin, and due to the transparency of the substance, the effect of ice or amber will be obtained.