Pipes kan therm pe xc. KAN-therm PUSH system (cross-linked polyethylene)

Pipe polyethylene PE-Xc Henco 20x2 bay 200 m consists of five layers. It has an inner and outer layer of physically cross-linked polyethylene, which have been cross-linked using electron beams, and an EVOH oxygen barrier according to DIN 4726, which allows this polyethylene pipe to be used in heating systems. These three different layers are connected to each other with a high quality adhesive layer. Henco polyethylene pipes are characterized by high flexibility and strength, lightness and protection against corrosion and overgrowth. The pipes have a smooth surface to reduce friction losses and high chemical and mechanical resistance.

Specifications:

Country Belgium Producer Henco Series and model PE-Xc Category piping Type polyethylene pipe with oxygen barrier Application water treatment, water supply and heating up to 90 °C Oxygen barrier yes, EVOH Type coil Length 200 meters Outer diameter 20 mm Inner diameter 16 mm Wall thickness 2 mm Volume 1 p.m. 0.201 l Weight 1 l.m. 0.117 kg Material polyethylene PE-Xc/EVOH with adhesive layers Oxygen resistance less than 0.1 g/m3/day Thermal expansion coefficient 0.18 mm/(m*K) Thermal conductivity 0.36 W/(m*K) Roughness 0.007 mm Operating pressure 10 bar Maximum temperature 95 °C Short-term maximum temperature 100 °C Crosslinking degree 60% Service life up to 50 years

Structure of PE-Xc Henco polyethylene pipe:

Appearance and equipment may be changed by the manufacturer without special notice.

Universal multilayer metal-polymer pipe TECEflex PE-Xc/Al/PE-RT is designed for installation of heating systems, including water heated floors, water supply and air conditioning systems.
It is part of the TECEflex piping system with a single set of fittings and a special TECE hand tool for pressing them in. The universal TECE flex multilayer pipe can be bent without the use of a special spring.
The price of a pipe is specified for 1 linear meter. Sold in multiples of packaging.

The combination of layers of PE-Xc, aluminum and a protective layer of polyethylene makes it possible to use the universal TECEflex multilayer pipe for installation:

  • heating systems "warm floor";
  • floor and apartment distribution networks for heating and water supply;
  • risers;
  • connection of heating radiators;
  • gas wiring;
  • air conditioning systems, etc.

Benefits of TECEflex PE-Xc/Al/PE-RT 7320208 XLPE pipes
- high stability (invariability of geometric dimensions due to the influence of temperature)
- Do not emit harmful substances into drinking water and do not emit an unpleasant odor when heated
- Unlike metal pipes, they do not overgrow and do not corrode
- Unlike ordinary plastic pipes, PVC and polypropylene pipes are resistant to creases and cracks
- A loose connection is easily identified visually - a leak will appear immediately when the system is filled.
- Easy to bend by hand without additional tools
- Have a long service life (about 50 years)
- Mechanical crimping of the fitting with a press sleeve and the “molecular memory” of the material, which constantly strives to return the pipe wall to its original state, make the connection reliable for the entire life of the system.
- Connections do not require maintenance during the entire period of operation, they can be safely laid in a concrete screed.
- Connections do not narrow the cross section of the pipeline, which significantly reduces the hydraulic resistance and facilitates the work of designers.
- Convenient and quick installation with press sleeves and special TECE hand tools is one of the main advantages of the TECEflex system. Unlike metal-plastic pipes, there is no need to calibrate the pipe, process the cut, and monitor the location of the rubber gaskets. Installation of the TECEflex system does not require heat treatment, electricity or compressed air.
- The brass fitting can be reused. The “pipe-fitting” connections are easily disassembled using a hot air gun - it is enough to heat the junction with it and then remove the fitting.
- A single set of fittings for all types of connections

Technical data of the TECEflex PE-Xc/Al/PE-RT 732020 pipe

Article: 7320208
Size: 20
Outer diameter, mm: 21
Wall thickness, mm: 3.45
Press sleeve size: 20
Pipe material:
inner layer: cross-linked polyethylene PE-Xc,
middle layer: aluminum, performing the following functions:
- anti-diffusion, prevents oxygen from entering the coolant and, accordingly, reduces the risk of corrosion on the elements of the heating system,
- stabilizing, reduces temperature changes in pipe dimensions and associated sagging, unaesthetic appearance of the heating system, cracking of the screed, etc.
outer layer: white PE-RT polyethylene, protecting the pipe from ultraviolet radiation, providing pipe dimensional stability and increased resistance to kink fracture.
Company manufacturer: TECE (Germany)
Application: TECEflex piping system
Pipe length in coil, m: 100

  • The inner layer. It is the basis of the entire pipe structure and gives it the necessary strength, rigidity, elasticity and thermal stability. The material of the inner layer is cross-linked high-density polyethylene (PE-Xc), the elongated polymer molecules of which are interconnected by cross-links, due to which they form a three-dimensional cellular structure. Thanks to it, the strength and resistance of the pipe to the pressure and temperature of the coolant are significantly increased.
  • oxygen barrier. During the operation of pipes made of cross-linked polyethylene from the external environment through diffusion, atmospheric oxygen penetrates into them, which dissolves in the coolant and leads to corrosion of the metal elements of the system. The outer layer is made of EVOH material (copolymer of ethylene and vinyl alcohol), which minimizes gas permeability
    heating circuit to meet the requirements of SNiP 41-01-2003.

The production of cross-linked polyethylene is a rather laborious operation, which, in combination with a combined design, increases the price of pipes for a warm water floor. However, high performance and long service life compensate for this disadvantage, making their use ultimately more profitable than using steel, copper or aluminum counterparts.

Pipe characteristics

A pipe for underfloor heating made of cross-linked polyethylene, which ForsTerm offers to buy in Moscow, meets all the requirements for creating a safe and efficient heating system. Thanks to the properties of the materials used, the manufacturer was able to achieve the following performance characteristics of plastic circuits:

  • the thermal conductivity coefficient of 0.32 W / m ° C ensures the high efficiency of the underfloor heating system;
  • the pipe is made in accordance with the European standard DIN 4726 and can withstand a pressure of 7 bar at a coolant temperature of 90°C or 11 bar at 70°C;
  • low oxygen permeability (0.02 g/m3 per day) significantly reduces corrosion of metal elements
    heating system (boilers, taps, pumps, etc.);
  • plasticity and bending strength of the material provide an allowable pipe rotation equal to 5d,
    which significantly reduces the likelihood of breakage;
  • long (about 50 years) service life allows you to buy a pipe for a warm water floor
    from cross-linked polyethylene for laying under a monolithic screed;
  • the dielectric properties of cross-linked polyethylene prevent the occurrence of stray currents,
    which have a destructive effect on metal pipes and connecting elements of the heating system;
  • the smooth surface of the pipe lumen reduces hydrodynamic resistance, and also prevents
    accumulation of deposits, which has a positive effect on the noiselessness of the system;
  • immunity to oxygen, alkaline and acid environment prevents corrosion of pipes and,
    accordingly, contributes to the long-term operation and reliability of the heating system.

Price of XLPE pipes for heating

The price of pipes for underfloor heating made of cross-linked polyethylene is several times lower in comparison with copper counterparts. At the same time, their cost is somewhat higher than that of steel or aluminum products, but this is offset by a longer service life (50 years versus 25-30 years). The price of XLPE pipes for heating depends on two indicators - the length and diameter of the cross section. The larger these parameters, the higher the cost of delivery, which is associated with the consumption of material for their production. On this page you can find the price list, which reflects the price of pipes made of cross-linked polyethylene.

Additional products for pipes for underfloor heating

The ForsTerm company provides an opportunity not only to buy pipes for underfloor heating in Moscow, but also to purchase auxiliary components necessary for its installation when arranging an underfloor water heating system, in particular:

  • connecting fittings - pipeline components made in the form of nozzles with a compression ring, with the help of which pipes are connected to each other or connected to the pipes of the heating system;
  • bend fixer - a durable polymer (made of reinforced acrylic) plate used to protect the pipeline at its turn from the collector from mechanical damage;
  • calibrator - plastic pipe fittings, which is a splitter for connecting pipes of various diameters.

Why buy underfloor heating pipes from Forceterm?/h2>
On our website there are price lists with prices for pipes for underfloor heating made of cross-linked polyethylene and additional components for arranging a heating system. You can consult with our managers on the installation and operation of heating equipment, as well as its repair or replacement. To buy XLPE pipes in Moscow, call us by phone or ask a question using the feedback function - all contact information is provided at the top of the site and the corresponding menu section.

Order by phone You can clarify any details and place an order through our phone managers. Call the sales department at +7(495)777-67-22, our specialists will definitely help you with the choice and place an order for you. Quick order The easiest way to order a product is to place an order in one click! Click the button next to the product price Quick order, enter your phone number and press Checkout and your order will be processed. In a few minutes, the manager will call you back to clarify the details of the delivery of the goods. Ordering through the basket If you want to purchase several items at once, use the classic basket. Click the button next to the product price Buy. Do this for all items you wish to purchase. After that, go to the basket by clicking the button Basket in the right corner of the site. In the shopping cart, check the contents of the order and its amount. After that, fill in the fields of the contact form, select the delivery method and click Checkout and your order will be processed. In a few minutes, the manager will call you back to clarify the details of the delivery of the goods. Order via mail You can send a list of goods you are interested in by e-mail. Even if you did not find the product on our website, we will do it for you. Send specifications, layouts, calculations - we consider all letters from our clients.
How to get the goods?
Delivery in Moscow and Moscow Region You can be sure: our own delivery service will bring the goods with all the necessary documents directly to your home. Delivery within the Moscow Ring Road - 500 rubles, outside the Moscow Ring Road - 40 rubles / kilometer. Delivery in Russia We will send the goods for you to any point in Russia through the transport company of your choice. The cost of such delivery depends on the region, dimensions and weight of the goods. You can always check with our managers for detailed information about delivery in Russia. Pickup Our office is located in the business park Rumyantsevo on the Kiev highway. Just 500 meters from the Moscow Ring Road, free parking, walking distance to the metro. You can pay for the goods at the office, and pick up at the warehouse. Before arrival, call us to clarify the availability of goods and order a pass to the business park.
How to pay for the goods?
Cash to the courier Upon receipt of the order, pay for the goods in cash to the courier. Bank transfer For legal entities we offer bank transfer.

Cash to courier or self-delivery
By bank transfer based on the invoice*
*When paying by wire transfer, the sending bank may charge a fee.

Cost of delivery:

Delivery by courier in Moscow 300 rubles. with an order amount of 10,000 rubles.
Delivery by car in Moscow - 1000 rubles.
Delivery by truck in Moscow - 1500 rubles.
Delivery outside the Moscow Ring Road 1500 rubles. + 30 rub. for every km. way*

Delivery terms:

Delivery of goods over 20 kg. carried out "to the entrance."
Unloading of goods at the place of delivery is organized by the customer (buyer).
In case of refusal of the goods (if it corresponds to the order and there are no defects), the cost of delivery is paid by the customer in full.*

Delivery by regions of Russia:

Delivery of orders to the regions of the Russian Federation is carried out by transport companies - partners of the online store.
The terms and conditions for the delivery of goods in Russia are negotiated individually, depending on the dimensions, weight and destination of the goods.
The customer has the right to choose a different delivery method. Delivery can be carried out by any transport company convenient for you.
For example: Business lines - www.dellin.ru; PEK - www.pecom.ru.

Loading...Loading...