Weave a bracelet from ribbons of baubles mk. Old traditions: how to weave a bauble from ribbons

Instruction

Take two long satin ribbons of the same width. For starters, two different colors will be enough for you - for example, black and orange. The length of each ribbon must be at least one meter.

Fold the ends of the two ribbons together and tie a looped knot. Then, on each tape, make 2 loops no more than 10-15 cm long and lay them on top of each other. Pass the loop on the black tape through the loop on the orange tape and tighten the orange loop. After that, make a loop on the orange ribbon again. Pass it through the black loop and tighten the black ribbon. You will have an orange loop in your hands, to which you need to fold the black loop again.

Pass the black loop through the orange one, and tighten the orange loop. Make an orange loop, then thread it through the black loop and tighten it. Continue the bracelet, alternating and tightening the loops until the bracelet reaches the desired length. Pull the loops of the same length and do not tighten them too much - so that the bracelet is neat and the ribbons are intertwined evenly.

At first, you can fix the end of the loop on the base with a pin so as not to lose it. As a result, you should succeed with the original square weave. Tie a regular knot at the end of the baubles.

With the help of such weaving, you can make both independent and braid for bags and clothing, as well as braid woven in this way, you can decorate various interior items - flower pots, glasses for pens and pencils, and much more.

You can try to create a twisted bauble no longer from two, but from four ribbons. To do this, take four ribbons of different colors. It is best to use ribbons about 5-7 mm wide. The length must be at least two meters. You can take not four, but two four-meter ribbons and start weaving by tying them in the middle.

To weave a twisted bauble, you first need to step back about fifteen centimeters from the edge and tie a knot. This residue is necessary in order to tie a bauble later. Spread the four ribbons in different directions perpendicular to each other. Bend the top ribbon towards you to make a loop. Lay the top tape on the right. Now take the right ribbon and fold it into a loop through the top ribbon you laid earlier. Put the right tape on the bottom one. Next, take the bottom ribbon and bend it as well, then lay it on the left ribbon. Bend the left ribbon as well and thread it through the top loop. Gently stretch all four ribbons in different directions so that the loops will secure your ribbons. Just don't drag them. Don't worry if you don't see a clear pattern on the first row. After you have stretched the tapes, lay them out again in different directions and repeat all the above steps. Already on the second row you can clearly trace your drawing. Repeat the above steps until the length of the baubles is perfect for you. At the end, simply fasten the ribbons and tie the bracelet around your hand.

From two satin ribbons of different colors, you can weave a square bauble, which can also become an excellent keychain. Take two satin ribbons of different colors. The length must be taken at least four meters. To make it easier to understand the process, let one tape be blue and the other white. You can take any other colors. Fold the ribbons in half. Place the blue ribbon with the ends away from you on the table. Lay the white ribbon perpendicular to the blue one exactly in the middle. The hinges should be respectively below and on the right. Take the top white ribbon and carefully place it over the right blue one and under the left blue one. Now bend the same ribbon to the right and place it above the blue ribbon. Take the right blue ribbon by the tip and pass it over the other ribbons down, at the bottom white ribbon, pass the blue ribbon under the bottom. The main thing is that this action is performed in the middle between the two blue ribbons.

Now take two blue ribbons and start pulling in different directions. Just do it very carefully. After pulling a little, go to the white ribbons and also smoothly pull them in different directions. And so on until a drawing of four squares is obtained.

Now fold the right white ribbon so that it turns to the left. Also fold the top blue one and place it on top of the white one. Lay the left white ribbon on top of the previously folded blue ribbon so that the end of it is on the right. Lay the remaining blue ribbon over the bottom white ribbon and thread it through the loop created when the top white ribbon was folded. Pull evenly on all ends to make four squares again.

Now take the top blue ribbon and fold it so that the tip is pointing down. Fold the right white ribbon over the blue ribbon. Put the bottom blue on top of the white. And put the remaining white ribbon at the top right on top of the first blue ribbon and then thread it through the loop formed by the first blue ribbon we folded. Pull on the ends. Such actions must be repeated until the length of your baubles or keychain is optimal for you.

Many people like this type of weaving because you can get not only a square bracelet, but also make it twisted if you wish. To do this, the already finished and fixed square bauble needs to be twisted a little, taking its ends with both hands and smoothly turning one end in one direction and the other in the other. With such a bauble, you need to be very careful. After all, if you stretch the tapes too much, it will be impossible to return them to their original appearance.

Stylish satin ribbon bracelet will become a fashion accessory

Satin ribbon baubles are less common than more traditional string or bead bracelets, but they have enough advantages. Such jewelry, even for beginners, turns out to be of high quality and stylish, and it will take much less time to make them than to weave from thin threads or painstaking work with beads. In addition, both adults and children can weave baubles from satin ribbons.You can wear this accessory not only on your wrist, but also as a keychain, for example, on bags. And you will learn how to weave baubles from ribbons in several different ways from this material.

A simple two-ribbon bauble for beginners

To weave such a bracelet, you will need 2 ribbons of different colors. You can choose any colors to your taste, but they must be harmoniously combined with each other. One of the most versatile options is yellow, which can be combined with red, blue, green shades.

Great example of color combination

Having prepared 2 segments, each about 1 meter long, we proceed to weaving:

1) We bend the end of the first ribbon, wrap the second around the loop and tie a knot. The first section forms a sliding loop that can be tightened and stretched.

Starting the weaving process

2) We put the second ribbon into the loop and thread it through the first loop, tighten the last one.

We fold the ribbons and thread through the loop

3) After that, we again fold the loop from the ribbon of the first color and thread it into the second, pull it up.

The process of weaving baubles from two ribbons

4) We continue weaving in the same way, alternately threading one loop into another.

We continue weaving in the same pattern until a certain length

5) Weave to the desired length and tie a knot at the end. Fenichka is ready!

So, our bauble is ready.

Weaving baubles from two ribbons

Weaving a tricolor ribbon bracelet

Weaving baubles from three ribbons is similar in technique to weaving from two parts, but the appearance of the bracelet is different. The accessory will be more interesting in color combinations, and the pattern on the front side and on the wrong side will be different.

Weaving from three ribbons

Let's analyze in more detail how to weave baubles from 3 ribbons:

1) We fix the tapes on the surface in any convenient way (for example, with tape or a pin).

2) Set aside 1 segment to the right, 2 to the left and then weave these two ribbons together.

3) We fold the loop from the first tape and wrap it with the other two, we tie it.

4) We turn a loop from a pair of segments, thread it into the loop of the first tape and tighten it.

Weave a bauble from three ribbons

How to weave a square bauble from ribbons

The square shape of the cord is an interesting feature of the 4-ribbon baubles, which looks very stylish and unusual. However, it can also be worn in a twisted form, then the bracelet takes the form of a three-dimensional spiral.

Volume bauble will look great on your hand

During twisting, it is important that the bauble does not stretch or deform, otherwise it may lose its attractive appearance.For work, you will need 4 pieces of tape 2 meters long or a little more.

For work we need ribbons

You can take segments twice as long, then you will need two of them. Let us analyze in more detail the weaving of this baubles of 4 ribbons:

1. Work should begin with fixing the future bracelet. We tie all the ribbons in a knot, leaving the ends for a tie of 15 centimeters.

The process of weaving a square bracelet

2. We lay out the ribbons so that they are located on 4 sides - up, down, right, left. The front and back sides of the ribbons do not need to be disassembled during weaving.

3. We lower the first segment from top to bottom so that a loop forms.

4. Move the second ribbon on the right to the left, overlapping the first with it.

5. We bend the third tape from the bottom up, overlap the previous one.

Weave the bracelet to the desired length, and fix it on the wrist

6. We transfer the last segment from left to right and draw it into the loop of the first ribbon.

7. We tighten the weaving and straighten the ribbons. It turns out an even square.

8. Weave to the desired length, repeating points 3 - 7.

So, our voluminous bracelet is ready.

Volumetric bracelet is ready! It must be remembered that square baubles can stretch if handled carelessly. You can strengthen them by pulling a hard thread or fishing line into the middle.

Learning to weave square bracelets from satin ribbons

How to weave a round bauble from ribbons

Unlike previous bracelets, a dense round cord is resistant to stretching and does not lose shape for a long time. It uses Chinese knots called "lotus", which can be pulled quite tight.

A round bauble made of ribbons woven with your own hands will be a great gift

You will need 2 ribbons 2.5 meters long or four shorter ones (about 1.5 meters). Let's figure out how to make a bauble from round ribbons, step by step:

1) If you have 2 ribbons, you need to fold them crosswise and secure with a pin, if 4 - tie a knot 10 cm from the edge and also secure with a pin.

The beginning of weaving a bracelet from two letochki

2) The first ribbon remains lying horizontally, we bend the second in the form of an arch on top of it.

We continue weaving in the same spirit

3) Unfold the left end of the first ribbon and lay it parallel to the right on top of the second ribbon.

We unfold the tapes and lay them in parallel

4) Lift the right end of the first ribbon up and place it on the ends of the second.

Laying ribbons on top

5) We work again with the second ribbon. The end that lies on top is bent to the left and passed over and under the first ribbon.

We work on the second ribbon, skip it over the first

6) We tighten the knot, straightening the elements of the square.

We tighten the knot, straightening the ribbons

7) After that, tighten the knot again, more tightly.

Tighten the knot a little more

We repeat the pattern of tying knots as many times as necessary to weave a bracelet of the desired length.

We repeat the steps, weaving the cord of the desired length

The accessory weaved in this way is very strong, so it can become not only a bauble, but also a key ring, an element of clothing decor or a headband.

Master class: a round bauble of four ribbons

Ribbon Weaving Tips for Beginners

Understanding how to weave ribbon baubles for beginners is quite simple.

Having mastered weaving, you can create original bracelets

Under the guidance of adults, a child can quickly master this needlework. However, there are a few subtleties that can prevent mistakes and quickly increase the level of skill:

• · You should always carefully monitor the tightening of knots and loops. Of course, at the very beginning of mastering the technique, an ideal result is rarely obtained. Still, it will be useful to master the principle as quickly as possible. To do this, the ends of the ribbons at different stages of work must be the same length.

Tips for beginners: take ribbons of the same length

• Also, it is recommended not to overtighten the knots and monitor the symmetry.
• · For beginners, it will be useful to fasten the ribbons with pins while working, and at the beginning of weaving, tie the ends with a knot.

Our little helpers when weaving baubles

• This will prevent unnecessary shifting of the ribbons and loosening of the loops. Weaving bracelets on weight without fastening is also possible, but this requires experience and skill.
• · Color combinations play a big role in how the finished product will look.

Weaving baubles does not require special experience, the main thing is to learn how to combine colors

• Therefore, for anyone who wants to master a hobby at a high level, it is useful to learn how to combine shades with each other correctly. In addition, in some subcultures, the colors of braided bracelets have their own meaning and may be included in jewelry for a specific purpose. These color codes are also recommended to be studied and kept in mind.

Baubles - an ornament that came to us from antiquity

Weaving baubles is an exciting activity that is suitable even for those who have very little experience in needlework, the main thing is to have a desire and some free time.

Weaving baubles is a great hobby that even a beginner can master.

Tuesday, August 27, 2013 2:59 pm + to quote pad

For both adults and children, weaving baubles from ribbons will not seem difficult. The materials for creating bracelets can be beads and beads, threads and leather, as well as satin ribbons. And if it is more difficult to work with beads or floss threads (this is a rather painstaking work), then weaving baubles from satin ribbons will not cause any difficulties in the work.

Experienced needlewomen can manage with one bauble in just a few minutes! Fast, high quality and very beautiful - these are the main advantages of weaving baubles from ribbons.

Those who are just trying their hand at weaving should start making baubles from ribbons. A little patience and perseverance, and the result will not be long in coming.

If we talk about the progenitors of the art of weaving baubles, it would be fair to recall the American Indians. Through the centuries, this piece of decor was introduced into their subculture by hippies. Today, the fashion for such things is back. Such cute little things, presented to a dear person, are very much appreciated. Previously, a bauble was considered an attribute of a certain culture, today it is just a friendly gift that can show off on everyone's hand. In some cases, girlfriends specifically wear the same baubles on their wrists, thereby indicating that they are best friends.

Young women of fashion hang baubles on bags and use them as key rings.

So, how to make baubles from ribbons? There are at least two easy ways.

Baubles from two ribbons

To work on the future bracelet, you need satin ribbons of two colors. Remember the principles of color combinations. Today, on the Internet, you can easily find special tables that help you learn how to harmoniously combine colors. But for the first time, you can take two colors, one of which is yellow. Colors such as red, blue and green are perfectly combined with it.

For example, let's see how to weave a bauble from green and orange ribbons. Approximately each tape should be a meter long.

First we fold the edge of one ribbon (green). We wrap it with another ribbon (orange), after which we tie a knot. Thus, from the green tape we get a live loop - if you pull on its long end, then the loop can be pulled up.

Now the loose ribbon (orange) needs to be folded into a loop, and then threaded into the finished loop made earlier from the green ribbon.

After that, the green loop needs to be tightened a little.

We will see that the already orange loop has become large. Next, we fold the green ribbon into the loop and thread it into the orange one. We tighten the orange loop. The process is repeated, we do these steps in turn.

As soon as we reach the desired length of the bracelet, we tie the ribbons with each other in a knot.

Fenichka is ready! It can be worn on the arm or attached to a backpack.

Square bauble of four ribbons

In this version of weaving baubles from ribbons, the consumption of ribbons is already greater.

We will need 4 tapes already (their width is 5-7 mm). Length - 2 meters or more. You can take 2 long ribbons and start weaving from the middle with four ends.

Let's start weaving a square baubles. We leave 15 cm of each ribbon on the ties, we tie the ribbons into one knot.

Do not think about where the front side of the tape is, and where is the wrong side: in this bauble they will be visible the same way.

Straighten the ribbons up, down, left and right. And then weave in the following sequence:

1. We bend one tape (pink) from top to bottom, leaving a loop.
2. Now we cover it with a second tape, bending it from right to left (brown tape).
3. Overlapping the brown ribbon, bend the beige ribbon from the bottom up.
4. Next, fold the orange ribbon from left to right and slip it into the pink ribbon loop.
5. Gently tighten all the ribbons, form an even square. We straighten all the tapes.

The ribbons do not need to be tightened too much, otherwise the bauble will be uneven.

Repeat all five steps until the ribbon reaches the desired length. You will see that the bauble turns out to be quite voluminous.

Many people like this bauble because it can be worn not only in its original form, i.e. square, but also twisted with a spiral. To do this, it is enough to twist the finished bauble slightly, but very carefully to prevent deformation of the product.

Handle such a square bauble with care. With strong stretching, the ribbons can twist, in which case the bauble will no longer return to its original form, but will be like this:

Many craftsmen, even at the beginning of work, insert a harsh thread into the bauble - so the bracelet does not stretch and stays in good condition for a long time.

Round ribbon baubles

You can also weave round baubles from ribbons. Such a round bracelet is woven from Chinese "lotus" knots. It will take about an hour to work. Tighten the knots very tightly, then the cord (the bauble itself) will turn out to be tough and will not lose shape for a long time.

So, we need two ribbons 2 or 2.5 m long or 4 ribbons 1.5 m each. In the first case, satin ribbons are placed crosswise and fixed with a pin.

In the case of weaving baubles from four ribbons, they need to be folded together, tied in a knot, after stepping back 10 cm for ties. The knot is also fixed with a pin.

After that, we tighten the ribbons into a bundle and straighten them.

Then the knot must be pulled tighter:

1. One ribbon (light) lies straight, the second (dark) lies on top of the light ribbon in the form of an arch.
2. Now we turn the light ribbon to the right so that it lies on top of the dark ribbon, also forming an arch. In this case, the two arches are perpendicular to each other.
3. Next, the dark ribbon should be lifted up so that it lies on top of the light ribbon, forming an inverted arch.
4. The light ribbon, in turn, bends to the left and passes not only over the brown ribbon, but also under it (look carefully at the photo!)

We repeat the above sequence of actions until the cord reaches the desired length.

That is, the basis of weaving a round baubles is a four-stage intersection of arches from ribbons. Then they are transformed into one square, which is then pulled tight. It turns out a beautiful elegant cord.

It can be used not only as a bracelet, but also as another decorative element. It can decorate children's things, be a keychain, it can be used to make a beautiful headband or handles for a child's handbag - why not? If you weave a round bauble tightly enough, there will be no doubt about the strength of such a product.

Now you know how to make ribbon baubles. But this is not all weaving options. Experiment!

Satin ribbons, they are so different, bright, shimmer in the sun. As you sort through the ribbons in your hands, you want to immediately weave them into your hair or tie them in a bow on your clothes. And you can also weave ribbon bracelets .

The technique for making bracelets from ribbons is very simple. Schoolchildren of elementary grades will cope with such work. Weaving baubles from ribbons a child develops perseverance, attentiveness, fine motor skills and a sense of style.

DIY bracelet from two ribbons

You will need 2 multi-colored ribbons about 1 m long.

Some knitting tips:

1. When weaving, do not overtighten the ribbons.

2. The structure of the bracelet is “loose”, but at the same time, make sure that the loops tightly wrap around the ribbons.

3. To prevent the ends of the ribbons from blooming, melt their edges with a match.

1. Tie the ends of the linen leaving a tail of 5-10 cm (so that it is convenient for you to tie the bracelet).

2. Next to the knot, roll each ribbon into a loop.

3. Pass the pink loop through the green loop.

4. Roll the green ribbon into a loop

5. Pass the green loop through the pink.

6. Pull up the pink ribbon so that it tightly wraps around the green one.

7. Roll the pink ribbon into a loop

8. And thread it into green.

10. Complete the weave by inserting the tip of the opposite tape into the last loop, and tighten the knot.

Here is a bracelet of 2 ribbons I got.

Ribbon bracelet: step 14

View from the "inside out".

Ribbon bracelet: step 15

Using this weaving and changing the thickness and length of the ribbons, you can get a nice belt, a decorative “collar”, or update an old hoop by sticking a bauble on top.

Bracelet with your own hands from the tapes "Tunnel"

DIY bracelet made of 2 ribbons

You can get 4-color ribbon bracelets, for this use 4 different thin (0.5 cm) ribbons.

This bracelet weaves longer, and its structure resembles an elastic cord. The more you tighten the weave, the stiffer the cord will be. From 2 ribbons 2 m long, I got a tourniquet 17.5 cm long + ties.

To prevent the bracelet from twisting, pin the beginning of the weaving with a pin, for example, to the pillow.

If you are weaving on 4 ribbons, then tie their edges leaving a free tip of 5-10 cm.

1. If you decide to use 2 ribbons for the Harness bracelet, then fold them crosswise in the middle and secure with a pin.

DIY ribbon bracelet - step 1

DIY ribbon bracelet - step 2

2. Lay the left blue tape (1) to the right over the bottom white tape (2).

DIY ribbon bracelet - step 3

3. Point the bottom white (2) up so that it lies on top of the right blue (3) and left blue (1) ribbons.

DIY ribbon bracelet - step 4

4. Place the right blue (3) ribbon to the left so that it lies on top of the bottom white (2) and top white (4) ribbons.

DIY ribbon bracelet - step 5

5. Lower the top white (4) tape so that it lies on top of the blue right (3). At the first crossing with the blue left (1) tape, it goes above it, and at the second it passes under it.

DIY ribbon bracelet - step 6

The resulting figure resembles a swastika.

Weaving baubles- one of the popular activities of modern girls. How to weave a bauble from ribbons with your own hands? They are woven from satin ribbons, from floss. Fenechka is also called a friendship bracelet. In turn, the bauble has a rather rich history. It has several centuries.

Previously, when weaving, ribbons and threads of various colors were used. Most often in the second half of the twentieth century, bright colors were preferred, as this attracted the attention of hippies to such an interesting thing. As a rule, the hippie subculture is lovers of everything bright.

They simply could not ignore the colored floss baubles. The exchange of bracelets, which are made of floss, as in the days of the Indians, symbolized for the hippies as a brotherhood. Engagement fenki of love were especially popular then. They did not differ in pattern and color, being used by hippies as a wedding ring.

When weaving such a fenki man puts his whole soul into it. It is made especially for a certain person, taking into account his passions, temperament and character. After you presented it as a gift, it remains with its owner forever, becoming part of his culture. But there are also "stray fenks". They are woven specifically in order to pass them on to each other, from city to city. This chain of ownership is closely monitored. The farther the Fenka passed from its first owner, the more proud it is.
Most often, fenki from floss are worn by members of religious communities. Someone weaves a star into them, and someone clings to a cross.

They are worn by many people regardless of gender and age. They can be used as a specific symbol or simply as decoration. Baubles, depending on the pattern and color, can tell a lot about their owner. For example, about his musical tastes and perhaps about his sexual orientation. So fans of various musical directions and groups mostly wear bracelets with the initials of their favorite idols. In turn, people who do not hide their orientation are distinguished by bright symbols. If they are worn by two guys, then these are black and blue jewelry, and if two girlfriends are pink with white elements.

How to weave a bauble from ribbons quickly? Below in the video tutorial you can watch a simple pattern for beginners, learn to understand and read ribbon weaving patterns. Such floss baubles of any color are important and even symbolic. The most popular and common colors are white, red, pink, orange and blue. White color symbolizes kindness, innocence, freedom. If the bauble is red, pink, orange, then this is the color of passion, love and joy. The blue color represents some kind of tranquility, peace and hope.