Sofa transformation mechanisms - which one is better to choose? Beautiful sofas Sliding sofa systems.

The sofa, as you know, is an integral part of any interior and, as a rule, one of the most important elements in the apartment.

At the same time, the search for the very sofa that will delight you and your loved ones, as well as be able to fit the whole family and fit amazingly into your particular interior is quite difficult. You can Buy a sofa in Moscow of any design, but first you should decide what you need.

In our article today, we will try to understand in as much detail as possible how not to make a mistake with the choice, what types of sofas exist and how to find the right option for you?

What are the types of sofas

There are a huge number of sofas on the market with a different set of characteristics, which we will dwell on in more detail. It should be said that the choice of a sofa should be made consciously, weighing all the pros and cons, as well as starting from the purpose for which you need it.

After all, you must admit that if you are part of a large family that often comes to visit you and stays for a couple of days, you can’t do without a folding mechanism, and if you just spend a couple of hours a week on the sofa, then you don’t need such a mechanism and not worth paying for it. Now let's take a closer look at the types of sofas.

Transformation mechanism. Whichever sofa you choose, each of them can be equipped with a folding mechanism. And by the way, such mechanisms are also different in the way the sofas are laid out:

• “Book” (the most traditional mechanism that is familiar to everyone, in order to bring this sofa to a horizontal position, you need to raise the seat up until it clicks, and the back will automatically lower, creating a sleeping place, a certain disadvantage of such a mechanism is that you cannot put the sofa close to the wall)
• "Eurobook" (in this case, in order to bring the sofa to a horizontal position, it is necessary to push the seat forward and tilt the back into the vacated space, a significant advantage of this model is the ease of transformation and soft back)
• “click-clack” (this mechanism is also similar in unfolding to a “book”, but in addition to this, it has the function of fixing the back and the ability to install it in several positions, such a nuance will allow you to choose exactly the angle of inclination at which it will be convenient to relax, but in this case, the sofa will also need to be installed at a distance from the wall)
• "dolphin" (this model is most often found in corner sofas, in this case the pillow is pulled out from under the seat and pulled up with a special loop, being installed flush with the main seat, this is an extremely popular mechanism that also has a linen box)
• “French folding bed” (a mattress is tripled under the seat in the sofa, which is subsequently unfolded, this is a very comfortable and compact model, though it is hardly suitable for everyday use)
• "Accordion" (in order to expand the sofa, it is necessary to push the seat forward and expand the double-folded back, such a sofa has large dimensions and transforms into a full-fledged and comfortable sleeping place, although the appearance of such models leaves much to be desired and over time, ugly creases remain on the mattress)

For a rational choice of a sofa, you should first find out what types of sofas exist. What are their differences, advantages and disadvantages.

There is no strict classification of types of sofas. In this review, I will be guided by the fact that sofas can be classified depending on their design and functional (purpose of the sofa) features. So let's go.

What sofas are depending on the design

In this section, I have selected the most significant design differences between types of sofas. These can be attributed

• the ability of the sofa to change shape and size without unfolding - in this part, I divided the sofas into stationary and modular
• the ability of the sofa to transform - unfold
• types of sofas depending on the type of filler
• types of sofas depending on the fabric for upholstery sofa (I think this indicator is the least significant)

Now about each design difference of sofas in detail.

Stationary, modular and island types of sofas

On this basis, sofas can be divided into three groups - stationary, modular and island. Let's figure out which ones are better.

Stationary sofas

Stationary sofas are sofas that have a fixed size. They do not allow you to change the shape and size of the product. Usually, a stationary sofa is placed along the wall. Often, the back wall of the sofa has a more economical finish (for example, felt), which differs from the main upholstery.

In turn, stationary sofas can be divided into:

Direct sofas - usually used in small spaces. There are folding and non-folding

Corner sofas - there are also folding and not folding .Corner sofas require more space.

• To the virtues stationary sofas can be attributed to the fact that when unfolding the sofa turns into a comfortable bed. You can use this sofa for both sitting and sleeping. The prices for such sofas are also quite lifting.
• disadvantage stationary sofas is a certain massiveness and not the possibility of changing the shape and size.

Modular sofas

A modular sofa consists of parts - modules that can be combined in different orders and create a single product. You can also use sofa modules as independent furniture elements.

Of course, such models are mobile and suitable for creative individuals. You can change the configuration and general appearance of the sofa. Due to the compact size of the modules, modular sofas are easy to move and transport.

• Advantages of modular sofas mobility in every sense, transformation and change in the general appearance of the product
• To disadvantages can be attributed to the fact that such sofas often do not have a bed and have a higher price than stationary sofas, the range of modular sofas on sale is much smaller than the range of stationary sofas.

This type of sofas is used to organize places to relax. At the same time, the sofa is not placed along the walls, but far from them. The sofa forms a semblance of an island. Island sofas have an attractive look from all sides. In shape, they can be round, semi-circular, oval and rectangular. Using an island sofa requires that there is enough free space in the room. The approach to the "island" should be free from all sides. Island sofas come in a variety of sizes. From one or two local to 5-6 local versions.

• Advantages of island sofas mobility, stylish and unique appearance
• disadvantages sofas do not have a bed, require large spaces, have a high price

Conclusion: if you need a sofa to organize a sleeping place, then you need a stationary type of sofa. If you want to organize seating and daytime activities, take a look at the modular versions. An island sofa is good if there is a lot of space in the room.

The design features of the sofas allow you to create sofas of various shapes. A detailed description of the possible forms of the sofa in this article.

Types of sofas depending on the ability to transform

Sofas are folding and not folding.

This type of sofa contains a transformation mechanism in the design, which is located inside the sofa body. There are more than a dozen sofa folding mechanisms. You can read more about all the mechanisms of transformation

When the sofa is folded, the mechanism is not visible. The mechanism allows you to convert the dimensions of the sofa. Usually folding sofas are needed to organize a place to sleep. Folding sofas can be both angular and straight.

• Advantages of folding sofas the possibility of transformation increases the functionality of the sofa - a sofa during the day, a bed at night. Pull-out sofas can contain additional drawers for linen hidden inside the sofa
• The lack of pull-out sofas associated with the reliability of the mechanism itself and the frame of the sofa. If the transformation of the sofa is frequent, then its wear increases. You need to carefully choose a reliable mechanism and a high-quality sofa frame when buying it.

Sofas are not folding

From the name it follows that this type of sofa cannot be converted into anything. Typically, these models are used to organize seating. Non-folding sofas can be used in pairs and or together with armchairs, creating a seating area, for example, around a coffee table in the living room. Normally, such a sofa will work in your kitchen or dining room. If the area allows, then you can use it in the hallway

• Advantages of non-folding sofas: compact size, low price
• Disadvantages of non-folding sofas: weak, limited functionality

Conclusion: if you need a multifunctional assistant, as in advertising all in one bottle, then you need a folding sofa. If the functions are more modest - just sit, then you can save a lot by buying a non-folding sofa.

Types of sofas depending on the type of filler

On this basis, two main groups can be distinguished.

Sofas filled with spring blocks

In such sofas, the filler is a structure made on the basis of metal springs. The springs can be connected in blocks or independent. Also, the spring block can have a common metal frame. This type of sofa is good for sleeping. Spring blocks have a long service life and are comfortable to use.

Sofas with filler without springs

As a filler without spring sofas can be:

• foam rubber
• PPU - polyurethane foam
• latex
• polystyrene balls

Conclusion: the choice of filler type depends on the functional purpose of the sofa. For sleep, it is better to use sofas based on spring blocks or with latex filler. If you want to save a lot, foam rubber will help you, but then the sofa will have to be changed very quickly. PPU occupies a middle position. It will do a good job of solving problems - a sofa for sleeping and for sitting.

There are a lot of upholstery. Read about the intricacies of choosing upholstery for sofas.

Fundamentally, upholstery can be divided into

• natural (cotton, leather, tapestry, jacquard, silk)
• semi-synthetic - consist of a combination of natural and synthetic fibers (flock, chenille)
• synthetic - consist entirely of artificial components (artificial leather)

But, I believe that among other design features of sofas, upholstery fabric plays the least importance. Because it's the easiest to replace.

General conclusion on upholstery: look at them last - the design of the sofa is more important than its appearance. The choice of upholstery type depends on the purpose of the sofa.

Look at this sofa and think about where it can be used. After a short evaluation, it turns out that there are not so many possibilities for using it.

You can find a classification by purpose, which is based on the types of premises in which the sofa will be used.

What will we get as a result

• Living room sofa
• Bedroom sofa
• Sofa for kitchen, dining room
• Sofa for children
• Sofa in the hallway
• Sofa in the office or library
• Sofa for loggia and balcony

It seems to me that such a division is not very correct. Yes, it has the right to life, but the same sofa can be put in any of the rooms. The question is different. What would you do on this sofa - sleep, eat or just sit. Do you understand what I mean? You can eat in the living room and sleep in the kitchen.

Therefore, I would single out three key groups of sofas by purpose

• Seating sofa
• Sleeping sofa
• Sofa for sitting and sleeping

Conclusion on the purpose of the sofa: look at the functions that the sofa will solve in your particular case and choose based on this understanding. Do not rush to the marketing tricks of sellers - like This sofa for the living room - buy it and you will be happy. And you want to eat and sleep on it, and in this example there will be happiness, but the seller who "sold" you an unnecessary sofa.

Video - types of sofas, what to look for when choosing

Finally, I offer a short video clip. Everything that I have already told above once again for consolidation. Only now it is already "video language".

That's probably all. I hope my findings help you.

A folding beautiful sofa is not just a piece of furniture in the living room. This is a multifunctional device that allows you to solve various problems and compensate for the lack of space in the room. But how many realize that choosing a sofa is far from being such an easy step as it seems?

Healthy sleep is an integral part of a person's life, in which he spends about a third of his time. That is why a person's sleeping place must fully meet his needs and requirements, be as comfortable and reliable as possible. Unfortunately, it is not always possible to buy a high-quality soft bed. The main reason for this is the lack of free space in the room. Often in a one-room apartment there is nowhere to put a chair - not like a bed. Yes, and look in the common room-living room bed would be inappropriate. But the sofa, like any beautiful upholstered furniture, is an indispensable element of the interior of such a room. From here, the conclusion suggests itself: we need a sofa that will be part of the decor of the living room during the day, a meeting place and pastime for the family, and at night it will turn into a comfortable place to relax. And there is only one option - a folding sofa.

But here the question immediately arises: how to choose a sofa in your apartment so that it fits well into the interior and reliably serves for many years without turning into an instrument of nighttime torture. After all, as we remember, it will have to be laid out and folded at least twice a day. In other words, you need to find out which mechanisms have proven to be the most reliable, and which, on the contrary, are unsuitable for frequent unfolding. And what are the general advantages and disadvantages of sofas of one type or another? To date, the furniture range is represented by a huge selection of sofas with a variety of types of transformation. And each model has its pros and cons.

Let's consider them all.

1. Elf is the simplest and most unpretentious type of sofa.

   
   

   It unfolds by simply lowering the sidewalls-armrests, which can be fixed in a comfortable lying position. This opportunity to sit in a reclining position creates an orthopedic effect. This sofa is very compact, although it is designed for only one person. In addition to this, it has a box for bedding.

2. Sofa book is clear from the name that this view is transformed by analogy with the opening of the book.

   
   

   To turn it into a place to relax, you need to raise the seat. The back will go down, taking a horizontal position. Then the seat is lowered back. Transformation mechanisms of this type are considered the most enduring of all existing ones. In addition, these models have a drawer for bedding at the bottom. But they also have certain disadvantages. Due to the peculiarities of the transformation, they cannot be moved close to the wall. In addition, when unfolded, they are not very spacious. But the most unpleasant thing is that in the place where the back and seat are joined, a gap forms over time, which interferes with comfortable sleep.

3. Eurobook sofa. Despite the similarity in name with the previous type, this model is laid out differently. The seat slides out or rolls forward, and the soft backrest overturns into the vacant space.

   
   

   The result is a very spacious seating area with a box for bedding below. Features of the design allow you to tightly push it to the wall. And the simplicity of the mechanism makes it more durable than the model of the previous type. However, when folded, such sofas are uncomfortable: their seat is too wide, so leaning back is not very comfortable.

4. Sofa with Tango mechanism (click-clack)

   Tango (click-clack) is a stylish sofa, which is an improved version of the "book".

   
   

   It unfolds according to the same principle: the seat rises, lowering the back, and then falls back. A notable feature of this type is the convenient folding sidewalls, which can be lowered to increase the area of ​​​​the bed or raised to make armrests. Another feature of this sofa is the ability to transform the back into a semi-unfolded state. Despite the apparent complexity, the mechanism of this sofa is also durable. Plus, there is a storage compartment at the bottom. However, like the "book", it cannot be moved close to the wall.

5. Pantograph - this type of sofa unfolds according to a principle similar to the Eurobook, except that in order to extend the seat it must be lifted up and then moved forward.

   
   

   After that, the backrest also overturns into the vacant seat. Thanks to this design, it retains its advantages in surface area, however, when folded, it is still not very convenient on it. Such a mechanism, although it provides ease of transformation, as well as an absolutely flat surface of the place to rest, significantly increases the cost of the model. But there is a box for bedding.

6. Puma - similar to the previous type of mechanism, this one unfolds according to the principle of raising and extending the seat of the sofa.

   
   

   At the same time, a soft platform rises to the vacated space from below, creating a single place for sleeping and relaxing. Such models are advantageous for easy unfolding, but, as a rule, they do not have a box for bedding. In addition, the backs of such models are separate pillows, which, in the mode of a place to sleep, always have nowhere to put them. Most often, this type of mechanism is on corner sofas.

7. The accordion is perhaps the most versatile model. It unfolds according to the “accordion” principle by extending the seat, which drags along and unfolds the back folded in half.

   
   

   The result is a spacious sleeping area. Whereas when folded it is very compact. But such an advantage also translates into a significant drawback: a lot of space is needed for an unfolded sofa, which will be fatal for a small room. In addition, such a mechanism requires considerable effort.

8. French folding bed - this option is hardly suitable for everyday use, but as an additional guest place it is quite suitable.

   
   

   The back of this model is usually replaced by pillows, which are removed before transformation. After that, the seat sequentially unfolds into three sections (according to the clamshell principle), forming a roomy place to relax. This type of mechanism is not reliable. In addition, there are uncomfortable gaps between the unfolded sections that interfere with comfortable rest. In addition, there is no laundry box.

9. American clamshell - unlike the "French" counterpart, this type of mechanism is more reliable and will withstand frequent transformations. It unfolds a little differently.

   
   

   First, a block with a folded component is pulled out of the sofa body. The seat of the pull-out unit rises, and the composite section unfolds forward like a clamshell and is installed on the legs. It turns out a spacious bed. However, not very comfortable seams remain between the sections. In addition, there is no compartment for linen.

10. Spartak is a stylish sofa, the unfolding mechanism of which is similar to the "American folding bed". Before starting the transformation, the pillows are removed from the seat.

    
    

    After that, a sofa block is lifted from the body, which, in turn, is decomposed into two more sections, which are installed on the legs. All sections are made of durable metal, which significantly reduces the weight of the structure in comparison with standard elements of other types of sofas. However, this design makes it impossible for the sofa to store bedding below.

11. Roll-out - another type of mechanism, characterized by both simplicity and reliability.

    
    

    At the heart of its transformation is a retractable front part, on which there is a pillow folded in half. This pillow unfolds and fits into the vacated space. A spacious, and most importantly, a sleeping place without seams is formed. However, the height from the floor of such a sofa may seem too small to someone.

12. Outdoor - perhaps the simplest and most economical type of sofa.

    
    

    The folding part, consisting of two parts, when folded, fits completely into the body of the sofa, forming its seat. Whereas, when unfolding, it is placed on the floor without legs or supports. The design is simple and therefore reliable. But, of course, there can be no question of any box for linen.

13. Konrad - a model with a three-section mechanism. When assembled, this is a beautiful and stylish sofa, and when disassembled, it is a spacious place to sleep.

    
    

    It is transformed by pulling out the seat, from which, in turn, the third section with the lifting part extends. As a result, a place to relax is not only large in area, but also high. The mechanism of this model, although reliable, is quite heavy. But there are boxes for storing bedding.

14. Dolphin - a similar type of transformation is most often found in corner sofas. The principle of its operation is the extension of the lower section of the long side, followed by lifting the pillow up with a soft handle.

    
    

    As a rule, a corner sofa of this design has a backrest consisting of individual pillows. Pillows have to be removed when unfolding the bed. The mechanism is resistant to loads, but wears out rather quickly. In addition, a carpet laid on the floor will greatly complicate the extension of the section.

15. Kangaroo - the principle of operation of the mechanism is similar to the "dolphin", with the only difference being that in the unfolded state it is much higher above the floor.

    
    

    However, this design loses its reliability. And, like models with the dolphin transformation type, this sofa does not have a long service life.

16. Recliner is the most modern and progressive kind of transformation mechanism. It allows you to adjust the position of the individual parts of the sofa - backrest, armrests, footrest, etc., thus creating the perfect place for relaxation.

    
    

    On some more expensive models of such sofas, vibration massagers are installed, which are controlled using the control panel. In addition, the appearance of such sofas is the most solid and presentable. However, they also have significant drawbacks. A full bed on such a sofa is unlikely to work. And the cost of even the simplest models bites.

The choice, as we see, is huge. So a sofa with which transformation mechanism to prefer? The first thing to consider is the size of the family. For one person, a sofa with an “elf” mechanism or some kind of “book” will suffice. Singles who are not constrained in their means and who want to stylishly and tastefully furnish, for example, a studio, can spend money on a recliner sofa. If the family is very large, then the best option would be roomy sofas when folded - for example, corner ones. For a small family, sofas of any other types are suitable for spaciousness.

To save space, it is also worth focusing on models that, both folded and unfolded, do not take up much space. Also, preference can be given to models with a lifting mechanism for storing bedding - space for blankets, pillows and blankets will not be superfluous. This option is especially relevant for sofas with pillow backs. It is not worth dwelling on options with unreliable mechanisms. They won't live up to your expectations. Those who are accustomed to sleeping on a perfectly flat surface of the bed should also avoid folding sofas and other varieties in which irregularities form between the pillows over time.

Otherwise, the results of the choice will focus on the preferences of the person. After all, as it usually happens: you go to a store or to a website, you see a sofa and you understand that it is what you need. And all these mechanisms, advantages and disadvantages fade into the background.

25.07.2019

9952 views, 0 Comments

In this article, we will briefly and informatively talk about the most common sofa transformation mechanisms that are presented on our website. Our goal is to help you quickly navigate through these not always clear names and find the option that suits you best.

To do this, we will consider sofas from the point of view of the consumer, and these are just 2 main criteria:

1. convenience of daily unfolding of the sofa;

And now let's list the most common sofa mechanisms:

1. Book;
2. Tick-tock;
3. American folding bed (Sedaflex);
4. French folding bed (Mixotoile);
5. "mechanism in 3 additions";
6. Spartacus.

Withdrawable mechanisms:

7. Eurobook (Eurosofa);
8. Dolphin;
9. Kangaroo;
10. Konrad (telescope).

"Book". The principle of using this mechanism is simple: you need to raise the seat until it clicks, and then lower it - while the backrest also drops. "Book" - the simplest mechanism in terms of use - it is easy to lay out and difficult to break.

Pros: the sleeping place is located along, and not across the wall. Such a folding mechanism is perfect for small spaces, because it does not take up much space, both assembled and disassembled.
Minuses: when laying out the sofa, it must be moved away from the wall, which is quite inconvenient for daily use. There is a risk of damaging the floors if you do not lift the sofa. In the place where the back and base are connected, a tubercle or notch may form, which interferes with a comfortable sleep and limits the space.

"American folding bed" or Sedaflex. Here the bed consists of two sections. To unfold the sofa, you need to remove all the cushions, pull the seat up and towards you by the special handle and unfold the sections until they rest on the supports. The sofa unfolds in two stages: first, the first section opens, and the second one unfolds behind it. Maximum load - 240 kg.

Pros: reliable transformation mechanism, made of high-quality wear-resistant materials. Sedaflex sleeper is flat without creases and bends. This sofa has a reinforced metal frame and mesh, which provide high structural rigidity and comfortable sleep. Also, this model allows you to use high-quality 12-cm mattresses.
Minuses: there is no linen box and there may be seams on the sleeping surface.

"French cot" (Mixotoile). This transformation mechanism is similar to an American clamshell, but unlike its “American version”, it consists of three parts, and otherwise, the folding principle is absolutely identical. The "French folding bed" has a fully metal frame, to which a high-density canvas awning is attached with the help of springs. Under the tarpaulin there are special wooden slats that give the sofa an orthopedic effect. The maximum load on the mechanism is 180 kg.

Pros: soft bed, equipped with a 50 cm thick mattress.
Minuses: uneven sleeping place, does not have a linen box.

"Spartacus". Structurally, the mechanism is identical to the "French clamshell" - it also consists of three sections and unfolds in a similar way. However, there is a significant difference that can affect the purchase decision. "Spartak" is equipped with a reinforced metal mesh, which allows it to withstand high loads, and you can use the sofa for daily sleep. Maximum load up to 240 kg.

Pros: Due to the reinforced frame, the model is highly durable, and therefore its durability indicators are higher. Has a spacious bed.
Minuses: like all clamshells, the Spartak mechanism has a not very aesthetic side view when unfolded. Due to the improved quality, the mechanism will cost more than the "clamshells".

"Tick-tock." The main advantage of tick-tock is its ease of use. The mechanism unfolds in no time: pull the seat up and forward, and then lower the back to the vacant seat. You can even do it with one hand! In this case, the maximum load on the bed is 240 kg.

Pros: the mechanism provides a spacious sleeping place and does not touch the floor covering when unfolding.
Minuses: when folded, the sofa has a fairly wide seat, which is not always convenient. If the mechanism breaks, the repair will cost quite a large amount.

Mechanism "in three additions" and the "French clamshell" mechanism are essentially the same. They fit the same and look the same. But many manufacturers share them, explaining that they use different materials for manufacturing. Therefore, when choosing a sofa with such a mechanism, specify what it is made of in order to avoid surprises later. The maximum load per bed is 180 kg.

Pros: soft and wide bed.
Minuses: there is no box for linen, the bed has bumps, and when unfolded, the sofa does not look very aesthetically pleasing.

Pull-out mechanisms.

IMPORTANT! Pay attention to the rollers and supports on the "roll-out" sofas. They must be made of soft materials - this will ensure the safety of your floor!

"Eurobook"- This is an improved version of the "book" mechanism. It is worth saying that this is one of the most popular vacant mechanisms on the market. The model consists of two parts: a back and a seat, and also has a spacious laundry box. To expand the sofa, you need to remove the back cushions, roll the seat towards you as far as it will go, and lower the back back into the vacant seat.
All parts of the sofa with such a mechanism should fit snugly against each other, but if cracks appear in the sofa, this indicates a low quality of the product. The maximum load is 240 kg.

Pros: such a sofa looks good both against the wall and in the middle of the room (it can be used for zoning the room, if space permits). "Eurobook" provides a full-fledged spacious bed. Minuses: when extended, the seat "rides" on the floor and may damage the floor covering.

"Dolphin"- perhaps one of the most convenient and common mechanisms on the market. It is very easy to unfold: just roll out the additional section from under the seat and pull the fabric handle towards you - the sofa is ready for use. The maximum load on the mechanism is 200 kg.

Pros: Sturdy construction guaranteeing the durability of the mechanism. The sofa provides a spacious sleeping place, there is a capacious linen box.
Minuses: when unfolded, there is a barely noticeable joint between the seat and the roll-out section.

"Kangaroo". This mechanism is very similar to the previous one in terms of the type of unfolding. Its only difference from the "dolphin" is a higher bed.

Pros: solid construction, a wide bed, the presence of a large linen box.
Minuses: in the unfolded state there is a joint between the seat and the roll-out section.

"Konrad" (telescope). This mechanism consists of three sections. For unfolding, it is necessary to pull the lower roll-out part (the first section), behind which all the others will extend. After you have put forward all the sections, you need to take the top of the first section and unfold it, laying it on the second. IMPORTANT! "Telescope" is very compact compared to other mechanisms, and also has an orthopedic grille. The maximum load per bed is 180 kg.

Pros: Compact when folded and space when unfolded.
Minuses: hard to move - the mechanism and the sofa are heavy.

1. If funds allow, choose a hardwood sofa frame (oak, beech, birch).
2. Carefully inspect the mechanism, it should have a manufacturer's mark on it. Unfold and fold the sofa, while all the positions of the back and armrests indicated for the model should work.
3. If you are looking for a sofa "for a long time", then it is better to choose a model with an independent spring block, it is much more durable than the usual "snake", dependent spring block or simple polyurethane foam (PPU).
4. When buying a sofa with a mechanism on a wooden base, give preference to oak, beech or birch - their wear resistance is much higher than that of other types of wood.
5. Remember, the length of the bed depends on the design of the sofa. If you are tall, pay attention to Eurobook type sofas or sofas with roll-out mechanisms. Their kinematics allows you to make a bed longer than two meters.

Happy shopping! Visit the website to see our range.

Modern technologies help to modernize furniture paraphernalia. Thanks to them, simple sofas turn into a full-fledged bed, which can accommodate from 4 to 8 people. In addition, high-quality filler makes it absolutely safe for human health.

To date, there are several types of sofa mechanisms. Each of them has characteristic differences. Here, both positive and negative sides of such a design are distinguished.

Thanks to them, the transformation allows you to save enough free space. In our material, you will learn which mechanism is better and what needs to be considered in the selection process.

Varieties of folding mechanisms

In specialized departments, a huge selection of folding mechanisms for sofas is presented. The most popular are:

• book;
• tango;
• euro book;
• pantograph;
• puma;
• elf;
• accordion;
• withdrawable;
• French foldout.

Book

Sofa book is considered a classic version of a furniture accessory. To transform it into a bed, just lower the backrest. In the process of unfolding, it resembles the construction of a book.

This mechanism has some advantages. These include:

• quality parts;
• durable construction;
• durability;
• spacious storage system.

The disadvantages of this building include:

• constant movement of the sofa for transformation;
• rapid deformation of the sleeping area. The filler begins to deteriorate over time at the fold;
• narrow bed. Only one person can fit here.

Tango

Sofa tango, is a modernized model of the "book". Modern designers have nicknamed this "click-clack" folding mechanism. His side and back parts are amenable to transformation. As a result of this, we get a full-fledged sleeping area where guests can accommodate.

The advantages of such a structure are:

• three positions of the backrest. Here you can adjust the angle of inclination, thereby selecting the desired position in the process of sitting.;
• This sofa mechanism is suitable for daily sleep. Durable fittings as part of the structure ensure the safe assembly of all parts during operation;
• a large box that acts as a storage area.

In addition to the advantages, there are some disadvantages:

• it is not possible to install the sofa close to the wall surface;
• requires effort to transform.

Eurobook

Sofa "euro book". It unfolds by rolling out the seat, which has an additional roller system. The back part is placed in the resulting plane.

Recently, this type of furniture paraphernalia has gained general popularity.

The positive qualities of this building include:

• comfortable bed;
• spacious bedding storage system;
• durable fittings as part of the mechanism.

The negative qualities of such a design include:

• deep seat. Without special extra pillows, it is impossible to relax here. The back is at a right angle;
• the constant movement of the front will cause scratches on the floor surface.

Pantograph

The pantograph bears some resemblance to the modern "euro book". Transformation is done in a similar way. There are structures that provide movement forward and upward.

The positive qualities of this model are:

• uniform seating area. In the process of unfolding, the joints are practically not felt;
• easy transformation;
• There is a place to store various small items.

In addition, experienced professionals identify the following disadvantages:

• uncomfortable seat. It also has a deep seat. The body is under constant tension. Additional pillows provide a comfortable existence;
• the complexity of the folding mechanism. As a result, its cost and maintenance increase.

puma

Sofa "Puma" is a simple and comfortable furniture accessory. It unfolds neatly with one touch. In order to turn it into a sleeping area, just pull the seat. It fits into the place of the formed void.

The tick-tock sofa mechanism has a similar design to the puma. It also easily transforms into a comfortable resting place with just two simple hand movements. This model is ideal for small living spaces.

It can be pushed tightly to the plane of the wall, thereby saving precious cm. As a rule, soft textured fabrics are chosen for such a sofa. They help to add a piece of comfort to the environment. The photo of the mechanisms of the sofas shows the components that are part of the folding structure.

Photo of sofa mechanisms