Homemade computer tables. Do-it-yourself computer desk: drawings with part sizes and video instructions! Corner high table

Today there is a computer desk in almost every home - this is an indisputable fact. This is not surprising, because the computer has long been considered a luxury and a modern person spends a lot of time on it. Therefore, the table on which the computer is located should be as comfortable as possible.

Of course, the current variety of furniture allows you to choose the desired model. But a high-quality computer desk made of wood is not cheap and not everyone has the opportunity to purchase it.

There is a wonderful solution to this problem - to make a computer desk yourself.

The main thing is to start...

The question "how to make a computer desk with your own hands" can sound intimidating for people who have no experience. In fact, this process is not difficult at all. The first step is to properly organize it. For this you need:

Determine the list of elements that will be located on the table - its size and design directly depend on this. Standard set - monitor, mouse, keyboard and system unit. Additionally, speakers, a microphone, a printer, etc. can be placed on the table.

Select the material from which the table will be made. Most often, chipboard is chosen for this purpose, less often - plastic or MDF.

Decide on the location of the computer desk. It will depend on this whether you need a regular straight or corner computer desk.

You can also make a combined table, but this idea will be more difficult to implement. When choosing a place, it is necessary to take into account the presence of sockets, the proximity of heating, the angle of incidence of light.

Determine the dimensions of the future table. A small computer desk is tidy, but it's more suitable for spending time on the Internet. But for work it is better to give preference to more solid table sizes.

When all these points are considered, and decisions are weighed, you can begin to draft a future product.

Computer Desk Design

The fundamental stage in the design of a computer desk is the choice of the most suitable design. At the same time, it is necessary to pay attention to factors such as:

• practicality;
• convenience;
• functionality;
• appearance.

Having decided on your preferences, you need to make a sketch of the future computer desk. It is not necessary to have special artistic skills for this. The main thing is to think over all the details and give the picture a complete look.

According to the finished sketch, it is already possible to create a detailed drawing, indicating specific dimensions. If this task seems impossible, you can use ready-made drawings of computer tables found on the Internet, improving them according to your wishes.

What materials are needed?

After the drawings of the computer desk have already been brought to perfection, you can begin to determine the materials necessary for work, such as:

• the basis from which the table will actually be made;
• fixing materials;
• tubes, handles, wheels and other fittings (depending on the complexity of the design).

Mounting materials, and the main material, it is better to take with a small margin, since during assembly it may be necessary to strengthen the table additionally. Saving on the quality of materials is also not worth it, it is important to choose the best value for money.

Pros and cons of creating a computer desk on your own

The idea of ​​making a computer desk yourself has a lot of advantages, such as:

You can make a product of the required length, width and height, which is ideal for a particular room. Factory furniture usually has standard sizes, the placement of which is often difficult. Making custom-made furniture is not a cheap pleasure.

The design of a computer desk, made by hand, will fully meet individual requirements. It will have the right number of shelves, drawers, its shape and height will be as comfortable as possible to work behind it.

A hand-made computer desk will turn out to be cheaper than purchasing a finished piece of furniture. The cost of the factory table includes not only the price of consumables, but also the wages of workers, rent of premises, store markup and many other factors.

Independent selection of accessories and parts for assembling the table. Quite often, furniture manufacturers save on these little things, which, as a result, has a deplorable effect on the quality of the finished table. Sometimes the quality is so bad that even an inexperienced person can see it from the photo of the computer desk.

At first glance, making your own computer desk may seem like an impossible task. But this process is very exciting and creative, so it is likely that even a small DIY computer desk can be an incentive to create other, more complex and intricate furniture.

DIY computer desk photo

It is difficult to imagine the life of a modern person without a computer, which requires a specially designated place in one of the rooms. A laptop or monoblock can be placed on any convenient plane, while stationary “smart” devices require computer tables. Due to the high cost in the retail network and structural simplicity, many are wondering - how to assemble a computer desk? And there is nothing complicated in this, if you build intelligently and in stages.

Types of computer tables

A computer desk is a multifunctional kind of cabinet furniture. People who constantly work at a computer at home cannot do without it. Without a convenient table, there is nowhere to place in one place:

• system unit and monitor;
• mouse and keyboard;
• speakers and router;
• folders and documents;
• printer and copier paper;
• stationery and discs for the accumulation of information.

All this is important to consider when thinking about how to assemble a computer desk with your own hands. An approximate diagram of a classic computer desk:

Designers and technologists have developed many types of cabinet furniture, including multi-seat computer tables. Even if the PC is used occasionally, you need a simple table where everything is at hand - with a place for a "system unit" and a sliding shelf for the keyboard. Or you will have to allocate a niche in the rack with shelves, providing a folding working plane. The choice of the shape of the tabletop depends on how you work for the PC:

• "riveted" look to the monitor;
• a lot of typing or playing games;
• often print documents;
• refer to a laptop or tablet standing on the side.

Look at examples and drawings of computer tables, the shape of the tabletop varies:

• simple rectangular;
• with a rounded cutout centered above the keyboard;
• with an arbitrarily curved line;
• L-shaped;
• U-shaped;
• U-shaped.
• curly.

It is not necessary to use wood, plywood or chipboard. Sometimes it’s enough to limit yourself to a high-tech frame structure - this is a tube frame plus a fixed table top made of any suitable material:

• plastic;
• thick plywood;
• laminated chipboard;
• thick display glass;
• veneered chipboard or thick plywood;
• finished worktop made of solid wood (natural wood).

You can also use parts of old furniture, designed as a table top on a computer desk with your own hands. But these are not all varieties of a table for a PC, since they are conditionally classified into subgroups according to their configuration:

1. A rectangular computer desk with a cabinet for a system unit is a classic version that came in the form of a desk transformation. But an ordinary desk is not very convenient for working at the keyboard, so the roll-out shelf turns it into a convenient functional place for working with a PC. When there is no need to use powerful speakers and various office equipment, this option is enough without an additional cabinet.

2. Corner computer desk, small, compact, takes up minimal space, very functional and ergonomic. One free corner in the room is enough to install a small product with great benefits of a work surface. It’s even convenient to have lunch here if you can’t leave your computer. It can be equipped in height with various hanging shelves along the entire height of the corner. The corner design makes it possible to use both planes of the wall and the corner to accommodate:

• auxiliary devices and office equipment;
• paper and stationery;
• collectible items;
• indoor plants.

For example, computer tables - photo:

3. Modular computer desk is a great invention for those who like to re-arrange the workspace. The set should have a basic set of modular elements:

• tabletop and sliding keyboard;
• pedestal under the "system unit";
• additional blocks;
• hanging shelves;
• corner sectors.

4. If it is not possible to allocate a permanent place for a stationary PC or laptop, it makes sense to opt for a compact mobile version. This is a folding table-transformer, where there is no table in the traditional sense, but there is a portable tabletop. This option has minimal dimensions and weight, but all planes are easily laid out. This workstation is easy to carry and transport so you can keep working:

• in the country;
• on a picnic;
• on the beach in the shade, etc.

5. Table-rack in the form of a rack with a folding top and multi-tiered shelves. Very handy when the room is very small but there is plenty of vertical space along the wall. In this design, it is recommended to fold everything after work, completing it with a folding chair. At the bottom, it is convenient to install a turntable under the system unit in order to deploy it after work to the place where the feet are usually. A monitor is placed on the main stationary shelf of the rack, and a keyboard and mouse are placed on a folding tabletop. Shelves up to the ceiling - for the rest of the equipment.

6. A multi-seat computer desk is convenient in a family where there are several PC users and office equipment. Behind a common tabletop, 2-4 people can sit behind 1-2 monitors. If there is no suitable table for sale, it is difficult to find, ask how to make a computer table for several people. To do this, it is important to consider where the main units and PC users will be located.

Selecting the color of the table surfaces

The advantage of self-assembly of a computer table is the absence of restrictions when choosing:

• model and countertop configurations;
• dimensions (the dimensions of the computer desk are limited by the space of the room);
• complete with additional shelves and cabinets;
• countertop material and color.

Ideally, a computer desk should be in harmony with other furniture in the interior and match the style. The classic table has a natural wood veneer, regardless of the base, but can be plain, matching one of the leading shades of the room.

1. If the room is decorated in a modern style, there is a lot of equipment around, then a black lacquered computer desk is suitable, in harmony with a large plasma monitor.

2. A small table should match in color with other cabinet furniture.

3. for a dark room on the northern stolon, it is better to choose light surfaces of MDF, laminated chipboard or other wood-like finishes.

4. White or other plain type of surface should be in harmony with other items in the interior.

5. It will also be original if you choose any unusual color of the tabletop, cover the base with fabric, make an original print and varnish the image.

Computer desk made of prefabricated parts

Due to the fact that prices for computer tables are increasing all the time, it is advisable to make them yourself. A table that is bought in a store without assembly and delivery will be much cheaper than a finished one. It is sold in the form of separate packages for each block, but there is an instruction on any computer table that shows the assembly steps. It is not difficult to assemble it, but it is tedious to be careful not to confuse the structural and fasteners. For assembly you will need:

• trays for sorting accessories and small parts;
• a set of screwdrivers (flat, Phillips) or a screwdriver with different nozzles;
• assembly diagram (instruction) and a drawing of the finished table.

Self-assembly according to the scheme is a simple matter, but unhurried and painstaking, and requires attention and perseverance. When buying a table, it is worth clarifying who you can call back if clarification is needed.

Attention: Large furniture companies engaged in wholesale and retail trade have specialized consulting centers that work with consumers. It is beneficial for them to deal with buyers who decide to self-assemble. When buying from the manufacturer, you can also ask the managers whose phone numbers are listed on the official website - how to assemble a computer desk? Help and advice can be obtained at any stage.

Stages of assembling a computer desk for individual modules

Stage number 1. Lay out in a conspicuous place:

• tool;
• assembly details and accessories;
• scheme (instruction);
• the main structural details according to the marking packages.

Stage number 2. Wooden parts (or chipboard) are laid out with the inside towards themselves so that there are visible holes for assembly. Next to each block lay out the corresponding parts for fastening. Check the completeness - if there are enough parts, you can assemble each block separately. The tabletop is fixed last, if there are no reservations in the instructions, diagram or drawing. After the general assembly, all the screws are firmly tightened or the fasteners are screwed deeper and closed with plugs.

Stage number 3. The greatest care is shown when assembling the rotary modules and the sliding shelf for the keyboard. The guides must be strictly parallel and horizontal to the floor, the shelf movement limiters are placed behind. The assembly sequence is carried out strictly according to the instructions so that there are no defects. When the pull-out unit is ready, the side racks are assembled to prepare the base for the countertop.

Stage number 4. Connect all the blocks according to the scheme with a working surface (table top), put a sliding shelf with rollers on the guides. Install decorative caps. Fasten the back plywood on the back wall. Check again if the table is wobbly. If everything is fine - reinstall and arrange all the parts of the desktop computer in their places, connect and work.

Worth considering:

1. Most models of computer desks are shipped unassembled from the warehouse, and you should ask about this when buying. It is important to immediately check the complete set, fittings and assembly scheme.

2. Materials that may delaminate during assembly are assembled carefully, especially when using a multi-purpose power tool, since it is difficult to adjust the pressing force or drilling speed. Be especially careful that the nozzle does not make a through hole if there should not be one.

3. The easiest way is to assemble a cabinet, so it’s worth starting with it in order to master the process. It is more difficult to mount moving parts and guides for their movement.

4. It is obligatory to fix the rear wall of the cabinet - it serves as an additional component of reliable fastening. Handles and other fittings are fixed last, as they can interfere with assembly.

5. Table supports - cabinet, sidewall or metal pipe. The stability of the computer desk depends on the reliability of their fastening to the table top.

6. Some parts of modular structures can be stacked on top of each other or hung on the wall. However, modules cannot be stacked on top of each other without securing with pins - one awkward movement, and parts of the case will fall along with office equipment.

Features of making a table for a computer with your own hands

If there is no desire to buy a ready-made computer desk, but you want to make it yourself, according to some special needs, then you will have to do all the details yourself. If we return to the beginning of the description, drawings of computer tables were outlined there, which are recommended to be used as an example. As a rule, in such drawings you have to make your own adjustments. With a creative approach, it is possible to borrow ideas and the best design details from each variety. For example, combine the advantages of a rack, a transformer and a corner computer desk.

After the final version is selected, sketches and drawings are made, it's time to move on to translating the meta into reality. In a building supermarket, we select material for the manufacture of our table and specify whether they provide services for cutting materials. Please note that you cannot do without precise cutting by a machine, especially when it is not an array, but pressed materials:

• finished worktop with trimming;
• MDF board;
• veneered plywood;
• laminated chipboard, etc.

When the store does not provide such services, cutting can be entrusted to any carpentry shop where there are special machines. Without drawings, no one will undertake to do according to a photo or drawing. Sometimes experienced craftsmen can take over the development of a drawing, but for a fee. But a good sketch with detailed dimensions can also serve as a basis for them to realize your desires. Don't forget to remind them to prepare the holes for mounting, and at the same time check what kind of fasteners to buy in the store. It remains to assemble your universal computer desk at home with your own hands. The quality of the assembly directly depends on a good tool and accuracy, especially when trimming.

The idea of ​​\u200b\u200bself-assembling the table can come at least if there is a schoolboy in the family, which means that you can’t do without a computer, and it won’t be superfluous to save on buying a ready-made table. If you try, the tables of independent production will not differ in any way from the factory ones, the same Techno Stolplit.

What types of computer tables can be assembled independently? Lots of options! Give preference, in particular, to those that are comfortable, ergonomic and multifunctional. All such models combine the following details:

• sliding shelf for the keyboard;
• processor stand;
• internal shelf for various small things;
• side cabinet with drawers;
• hinged structure, hanging shelves above the bedside table and directly on the table top.

It is difficult to overestimate suspended structures in a computer desk. They are useful for installing music speakers, as well as books and stationery. This is especially true if the table is being built for a student. In addition, a printer can be installed on such shelves, and additional office equipment - everything is determined by the needs and imagination of the owner of a makeshift table.

Instructions on how to assemble a computer desk

Go to the hardware store or market and purchase the following
materials:

• furniture board (18 × 600 × 2000 mm and 18 × 400 × 2000 mm, 3 pieces each, as well as 2 pieces 18 × 200 × 2000 mm);
• about 6 meters of board 12 × 120 mm;
• plywood sheet 6 × 1525 × 1525 mm;
• drawer guides 50 cm (3 pairs);
• guides for a shelf with a keyboard 40 cm (1 pair);
• dowels and screws;
• handles for drawers;
• sandpaper of various grain sizes;
• wood varnish.

From the tools you will need a hacksaw, a drill and drills, screwdrivers or a screwdriver, a square and a chisel, a tape measure, a ruler, a pencil.

You can find table drawings on the Web or make individual ones (whether it be a straight or corner table). In accordance with them, we cut out the necessary details, including the vertical walls of the table, the tabletop itself, the components of the cabinets and drawers. At the bottom of the vertical legs on the side facing the wall, cut a piece to fit the baseboard so that the table can later be leaned against the wall.

And in the end, we take up the hinged structure. Saw out the side and horizontal shelves, round the top front edges. To attach to the countertop, make several holes in the walls, using self-tapping screws, fix all the elements together.

Don't overlook additional details.

Cabinet, hanging shelves, drawers - all these are integral components computer desk, including self-assembly. This element of the interior cannot be considered complete and complete if, with the exception of the monitor, keyboard and the processor itself, nothing else will fit on it.

A cabinet, hanging shelves, drawers for a computer desk also need to be built independently. For this:

• for stability, we cut the upper shelf and the transverse bar from a furniture board 400 mm wide, and the middle wall from a board 200 mm wide;
• we attach the central wall to the countertop, behind it the rear transverse bar is screwed;
• put the top shelf on the central wall, check the level;
• the shelf on the sides is screwed with self-tapping screws;
• the general structure is attached to the middle wall;
• the shelf above the pedestal is sawn out of a shield 200 mm wide and fixed at a height convenient for installing a printer, for example;
• drawers for cabinets are cut from a board 12 × 120 mm and plywood (used for the bottom);
• drawer guides are attached from the bottom to the top; the distance between them should be the same, and the guides themselves should be parallel;
• then attach the rails for the shelf where the keyboard will be installed.

When the table is a one-piece structure and you have made sure that you like it that way, disassemble it! Do not be surprised. The reason is that all the wooden parts will now need to be sanded and varnished. And so that the reassembly of the computer desk is quick, mark which part was attached where.

Self-production of computer work is not difficult for a person who knows how to deal with the appropriate tool and material. By choosing this option for arranging the working area, you will save a lot, as well as implement an individual product design.

By assembling a computer desk yourself, you can equip both a small compact room and a more spacious room. It is advisable to open the table not only with a colorless transparent varnish, but also paint it in any color you like, decorate it in every possible way. So you get an original product - comfortable and ergonomic. Do not doubt your abilities. And success!

For convenient homework, it is not at all necessary to buy an expensive computer desk, it is quite possible to do it yourself. This piece of furniture can be assembled from a variety of materials, choosing the desired shape and configuration. To make an angular one, one must not only choose the appropriate dimensions, but also determine what exactly the design should have, what functions to perform. Before starting work, it is recommended to draw up a detailed project or drawing, which will display all the required information (Fig. 1).

Image 1. Diagram of a computer desk.

Project for a computer desk

How to make a computer desk with your own hands without outside help? It will be necessary not only to draw up a detailed drawing, but also to calculate the materials, cut them.

Before drawing up a project, pay attention to the following parameters:

Image 2. Do-it-yourself drawing of a computer desk.

• table functionality. Think about whether it should have drawers, pull-out shelves, special stands for appliances and books;
• it is important to provide for the dimensions of the swivel chair so that the table is comfortable to use. Usually, standard sizes are taken, all office chairs almost do not differ from each other;
• for convenience, the height of the structure is selected within 700-750 mm, including the table top. If the table is made for a child, then its height may be slightly less;
• the dimensions of the office equipment to be installed must also be taken into account, so that later you do not mount an additional shelf for the printer. Do not be too lazy to take a ruler to take additional measurements of office equipment before making drawers and shelves;
• It is important to take into account the parameters of the room where the table will be installed. It is recommended to place it in such a way that the light falls correctly, the chair moves freely, and the seated person does not feel discomfort when using the furniture.

It is important when performing calculations on the drawing to indicate all dimensions, including the thickness of the side walls, countertops. This will allow you to quickly cut sheets of material, assemble easily and efficiently. The drawing should depict the location of the fasteners, their number. Pay attention to the picture how to do it correctly (Pic. 2).

Back to index

Materials and tools

To work at a computer, you need to prepare tools and materials. For work you will need:

• long metal and short rulers;
• simple pencil;
• end planer;
• square;
• screwdriver;
• jigsaw;
• drill, a set of drills, a depth gauge that will allow you to drill blind holes;
• Circular Saw;
• brushes for varnish or paint.

From the materials that are necessary for mounting a comfortable desktop, you need to take:

• MDF boards. It is necessary to take sheets with dimensions of 2440 × 1220 × 15 mm, during operation they are cut, according to the project. Side surfaces, drawers and shelves are made from such plates;
• pine boards measuring 1200 × 150 × 25 mm, you need to take 2 pieces, they are used to strengthen the structure;
• for fasteners, it is worth taking 120 screws, dimensions - 3 × 15 mm, the head must be countersunk;
• ties for the corners of the plastic structure - 40 pcs.;
• sliding guides, the number depends on the number of drawers and drawers;
• self-adhesive or end edge, which will form the edge for shelves and drawers;
• sanding paper for edging;
• wood primer, varnish or paint for finishing.

Back to index

Table assembly

You need to start work with the assembly of the side parts. Guides are screwed to the surfaces of the boards; they are necessary for drawers and shelves. After that, all the side modules are assembled on the dowels. It is recommended to add PVA construction glue to the sockets, it will make the fasteners more reliable. To strengthen the fasteners, you can insert thin wooden planks into the nests. Assembly example in the figure (Fig. 3).

As the main material for the side walls, you can use ordinary fiberboards, but it is best to take MDF sheets with a thickness of 10 mm.

Image 3. Drawing of a computer table with upper shelves.

Such walls are perfectly fastened with self-tapping screws. Next, the table is assembled with your own hands using spare parts for drawers. For the assembly of boxes, MDF 10 mm thick is used. During installation, it is important to strictly observe right angles, since it will depend on how easy and convenient it will be to use the boxes. All dowels are inserted neatly into the sockets, which, for reliability, are best smeared with glue.

The side cuts of the shelves are pasted over with an edge tape, it is enough to iron it with an ordinary hot iron. To protect the tape, it is best to use a strip of paper to prevent the edge from blistering. If necessary, the excess edge is cut off with ordinary scissors, but this must be done very carefully. Wooden planks are glued to the front and back sides of the shelves, while their dimensions must fully correspond to the parameters of the part. This is necessary so that the sliding shelf can move freely along its guides.

A table for a computer should combine a large number of functions: perform the tasks of a desk, provide space for storing folders, disks, notebooks and other stationery. In addition, it must ideally fit in shape, design and size to the interior of the room. But, despite the wide range of furniture in stores, it is impossible to find a suitable option. But there is a way out: you can do it yourself. It does not require special skills and can take only one or two days.

Types of tables for the computer

There are a huge number of variations in the design of a computer desk. They are divided into three main types:

• straight;
• corner;
• combined.

The choice of a particular option depends on the area of ​​\u200b\u200bthe room, the skills of the performer and material costs,

The most simple and uncomplicated to create is considered to be an angular design, which makes it possible, with a minimum of financial and physical costs, to ensure ergonomics and ease of location even in a small room.

Necessary tools and materials

To create a computer desk with your own hands, you will need:

• Main material. Wood is the best choice. And you can also use laminated sheets of chipboard, MDF, plastic, metal and glass.
• Fasteners: thick screws and self-tapping screws.
• Aluminum corners about 30 cm long - for sliding shelves.
• Dowels for furniture: 4 or 6 pieces.
• Wood glue.

More tools needed:

• electric jigsaw or hand saw;
• screwdriver;
• grinder and sandpaper of different sizes of crumbs;
• drill;
• a sketch indicating the dimensions of the structural elements;
• pencil and construction ruler with a level;
• roulette.

Corner computer desk: step by step instructions for making

Angular models are suitable for those people who spend most of their time at the computer.

The advantages of such models include:

• require a small amount of material for their manufacture;
• the finished product occupies a small area;
• the ability to install in unused parts of the room;
• the admissibility of placing superstructures and shelves, which will add more comfort during work.

A huge disadvantage is the lack of chances to rearrange them to another place.

Corner structures can be with or without superstructures.

In the manufacture of such options, the recommended values ​​\u200b\u200bmust be observed. Going beyond the maximum allowable limits causes inconvenience in work.

The dimensions of the structure are calculated based on the parameters given in the table.

The depth of the corner should not exceed 50–60 cm. The total length of the product is 160–170 cm, compact models can be placed in 130 cm.

Manufacturing instructions

Step 1. Based on the selected drawing, all elements of the future product are drawn on the material and cut out. When using non-laminated raw materials, it should be pre-treated with a disinfectant solution.

Drawing of a corner computer desk

Step 2 Assemble side racks. The selected drawing has a large section on the right. If it is supposed to place drawers in it, then guides must be fixed on the inner side walls. They also mount boxes to which guides are attached.

Step 3 Mount the corner support. A rectangular frame is installed on it, a place is provided for a sliding shelf where the keyboard will be located.

Step 4 In the tabletop, on the side posts and the corner support, dowel holes are made: 2 for each sidewall and one on each side of the support corner.

Step 5 Glue is applied to the dowels and installed in the side posts and corner support.

Step 6 Mount the table top. The sections at the back are covered with fiberboard walls.

Step 7 Make drawers and install them in place. If shelves are supposed, then they are hidden behind the door.

Step 8 Finishing. The made computer table is varnished or painted. In cases where laminated wood sheets are used, only the processing of the outer ends is needed. For this purpose, a special edge band is used. It is made from various materials and it is presented in a wide range of colors.

The edge gives the product a finished and beautiful look, prevents the release of formaldehyde dangerous for humans from the chipboard.

On the cuts of the product, the edge tape is glued using a conventional iron.

Hinged computer desk: step by step instructions for making

Hinged computer desk has virtually no drawbacks.

No less comfortable model is a hinged computer desk. It occupies a small area, can have different heights, depths and shapes depending on the user's preferences.

Mounted models are made from a variety of materials, but most often they are made from oak or glass. They are attached to the wall with hooks or other fasteners.

The advantages of this model are:

• lack of legs;
• functionality;
• compactness;
• attractive appearance;
• easy and convenient installation.

Manufacturing instructions

In addition to the tools and materials listed above, to make a hanging computer desk with your own hands, you will need several metal L-shaped brackets to attach it to the wall.

Step 1. First you need to decide on the length and width. After that, cut the prepared material according to the calculated dimensions. You can also use a table top from an old computer desk.

Step 2 If non-laminated raw materials are used, it should be pre-treated with an antiseptic. The visible ends of the tabletop are trimmed with an edge tape.

Step 3 On the wall, fix the L-brackets at the same level and at the same distance from each other. In addition to screws, additional fasteners may be required. It all depends on the materials from which the wall is made.

Step 4 The prepared tabletop is attached to the brackets.

Restoration of an old computer desk

There are situations when an old computer desk is quite serviceable and can last a few more years, but it has an unattractive appearance. In such cases, you can try to restore the old furniture, which will eliminate the need to purchase a new one and significantly save the budget.

Restoration of an old computer desk consists of the following steps:

1. Preparatory work.
2. Elimination of defects.
3. Decoration.

Stage 1. Preparatory work

Before proceeding with the restoration of the computer table, special preparatory procedures should be carried out. They are required for a more even and durable laying of all layers of finishes.

It is necessary to make an assessment of the condition of the computer desk, check the quality of wood and fittings. If defects are identified, they are recommended to be eliminated at this stage. If there are drawers, you should make sure they are in good condition.

Otherwise, it will be very disappointing if, after all the efforts and efforts made, the table falls apart in a few weeks.

For greater smoothness of the surface, when removing layers of old paint, you first need to use coarse-grained, and then soft sandpaper.

Stage 2. Elimination of defects

If flaws are found on the surface or legs, they are eliminated, as they can interfere with the upcoming recovery process.

Chips and cracks are often observed on outdated furniture. You can remove them in the following ways:

1. Filling the defect with putty. For this purpose, it is applied with a spatula to the area of ​​damage, and after final drying, it is carefully treated with sandpaper. In construction stores, the choice is so diverse that it is possible to pick it up as close as possible to the color of the tree so that the treated area does not differ.
2. Treatment with a primer or a mixture of small particles of wood and varnish.
3. Treatment with turpentine. To this end, the defect should be filled with a composition, covered with a metal plate and a heated iron.

Only after the elimination of all defects, you can proceed to the next stage of the restoration of the computer desk - decoration.

Stage 3. Decorating

In this phase, you need to use all your imagination and approach the design of furniture with ingenuity.

It is possible to restore an outdated table for a computer in the following ways:

1. Decoration with wooden panels.
2. Painting through tulle.
3. Decoupage.

Wood paneling

Finishing the table with wooden panels.

This technique for restoring outdated furniture is one of the easiest ways.

Wood paneling is suitable for small square tables, such as balcony or outdoor tables.

For this you need:

• brushes;
• saw;
• jigsaw;
• glue for wood;
• sandpaper;
• planks;
• dye;
• wood varnish.

Step-by-step instruction:

1. Planks should be carefully inspected for knots and other imperfections.
2. The selected boards should be adjusted to the parameters of the table and their edges should be leveled with a saw.
3. Paint the details in the desired tone and leave until the paint is completely dry.
4. Wood glue must be applied to the prepared plank and pressed firmly against the plane of the table. A similar action must be done with all planks and surfaces. You need to glue them close to each other, without leaving any gaps. If necessary, the edge is leveled with a jigsaw.
5. All surfaces must be cleaned with sandpaper, remove dust and dirt.
6. In conclusion, the computer table is recommended to be varnished.

Painting through tulle

Painting through tulle allows you to create an original decor element even from an old table.

This method is one of the easiest and key options for restoring outdated furniture, allowing you to transform it into a special element of interior design.

Restoration requires:

• grinder or sandpaper;
• masking tape;
• roller;
• tools for disassembling the table: pliers, hammer and screwdriver;
• background paint;
• paint can;
• tulle;
• newspapers;
• acrylic lacquer.

Step-by-step instruction:

1. The computer desk must be disassembled into separate parts and sanded with sandpaper or using a grinder. After that, dust should be removed from them and covered with background paint.
2. After complete drying, the product must be assembled into a single whole. Newspapers are recommended to cover those areas where it is undesirable to get paint in a contrasting color from a spray can.
3. The tulle should be laid out on the tabletop, avoiding the formation of folds and bruises.
4. It is necessary to carefully paint the tulle with spray paint.
5. After complete drying, the tulle and newspapers must be removed.
6. To give furniture a decorated look and protect against premature aging, a layer of acrylic varnish should be applied to the surface.

Decoupage technique

Decoupage computer table

You can also remake an outdated computer desk using the decoupage technique.

For this you need:

• decoupage glue or PVA;
• scuba diving;
• decoupage card;
• base acrylic paint;
• clear acrylic lacquer;
• primer;
• coarse and fine-grained sandpaper;
• roller;
• fan brush.

Step-by-step instruction:

1. The computer desk must be prepared, primed all surfaces, covered with paint and wait for it to dry completely.
2. On a dry surface, apply aqualak and, after it dries, carefully treat it with a sandpaper.
3. Cut out pictures from decoupage paper, lay them out on the countertop and outline their future location.
4. The selected pictures should be soaked in water for several minutes and then glued to the table surface using special decoupage glue or PVA. To prevent the formation of wrinkles and irregularities, it is recommended to use a fan brush.
5. After complete drying, the surface must be treated with fine-grained sandpaper, remove debris and dust.
6. In conclusion, the product should be covered with two layers of varnish with an interval for the complete drying of the first layer.

Making a computer desk with your own hands is not particularly difficult, even for novice users, and allows you to create not only the best furniture option for yourself, but also significantly save the family budget.